● Field installation accessory● 3⁄4” engineered wood● Edge banded on front edge only● CLIP LOCK shelf rests included
Vanity Linen CabinetAdjustable Shelf or 4 Pack Shelf Kit
Adjustable ShelfS1221S1521S1821S24214 Pack Shelf KitSK1221SK1521SK1821SK2421
APCMIRD
● Field installation accessory● Natural Finish dovetail drawer● Includes Deep Roll Out Tray, all glide hardware
and installation instructions
Vanity Linen CabinetDeep Roll Out Tray Kit or
4 Pack Deep Roll Out Tray Kit
Deep Roll Out Tray KitDROT1221DROT1521DROT1821DROT24214 Pack Deep Roll Out Tray KitDROT1221-4KDROT1521-4KDROT1821-4KDROT2421-4K
ADROT1221 7 3⁄4”DROT1521 10 3⁄4” DROT1821 13 3⁄4”DROT2421 19 3⁄4”
RD
● Features one full-depth adjustable shelf in top section and four Deep Roll Out Trays in lower section
● Full-depth adjustable shelf is 3⁄4” engineered wood and edge banded on front edge only
● Adjustable shelf and Deep Roll Out Trays packaged separately for field installation
Vanity Linen Cabinet4 Butt Doors with Deep Roll Out Trays
APCFE
■ MIPERD
■ VLC242184 4ROT BUTT VLC242184 4ROT BUTT SD
Moldings
MO
LDIN
GS
181
All moldings are available in all finishes, unless otherwise noted.
Bold line indicates finished surfaces.
Individual sticks of molding are made from individual pieces of wood and may vary in color.
Molding stacks are ordered as a kit and if returned, must be returned as a kit.
For inspiration and tools to design additional molding build-ups, including build-ups inspired by the Molding Stacks, visit Designer Resources at http://resources.woodmarkcabinetry.com/.
Designer Resources Link: resources.woodmarkcabinetry.com American Woodmark Designer’s Choice Specification Guide
VANITY CABINETS: Vanity Linen & AccessoriesVA
NIT
Y CA
BIN
ETS
180
Construction Options (see page 52): ■ = Available for selected SKUs
Designer Resources Link: resources.woodmarkcabinetry.com American Woodmark Designer’s Choice Specification Guide
HWC 1X2X96
● Height dimensions are the above-face-frame height when used as shown● Pre-packaged molding kit includes: ● ACM8 ● S3S396 ● SQCR8 ● HWC 1X2X96● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS ACM8 200
Height A A Shown Min. Max. MS ACM8 200 4 1⁄4” 3 9⁄16” 4 1⁄2”
MS ACM8 200
● Height dimensions are the above-face-frame height when used as shown● Pre-packaged molding kit includes: ● ACM8 ● SIM8 (2) ● S3S696 ● HWC 1X2X96● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS ACM8 300
Height A A Shown Min. Max. MS ACM8 300 5 7⁄8” 5 7⁄8” 7 3⁄8”
MS ACM8 300
● Height dimensions are the above-face-frame height when used as shown● Pre-packaged molding kit includes: ● SCVM8 ● STRM8● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS SCVM8 100
Height A A Shown Min. Max. MS SCVM8 100 3” 2 7⁄8” 4 3⁄4”
MS SCVM8 100
● Height dimension is the above-face-frame height when used as shown
● Pre-packaged molding kit includes: ● SCVM8 ● SQCR8 ● SBIM8 ● HWC 3/4X3/4X96 ● HWC 1X2X96● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS SCVM8 200
MS SCVM8 200
● Height dimensions are the above-face-frame height when used as shown● Pre-packaged molding kit includes: ● SCVM8 ● CLBM8 ● SIM8 ● HWC 1X2X96● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS SCVM8 300
Height A A Shown Min. Max. MS SCVM8 300 5” 4 5⁄8” 6 1⁄4”
MS SCVM8 300
● Height dimensions are the above-face-frame height when used as shown● Pre-packaged molding kit includes: ● ACM8 ● CTM8 WD ● HWC 3/4X3/4X96● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS ACM8 100
Height A A Shown Min. Max. MS ACM8 100 3” 2 3⁄16” 3”
MS ACM8 100
MO
LDIN
G
183M
OLD
ING
182
Construction Options (see page 52): ■ = Available for selected SKUs
MOLDING: Molding StacksMOLDING: Molding Stacks
Designer Resources Link: resources.woodmarkcabinetry.com American Woodmark Designer’s Choice Specification Guide
● Height dimension is the above-face-frame height when used as shown
● Pre-packaged molding kit includes: ● LCVM8 ● CTM8 WD ● SBIM8 ● HWC 3/4X3/4X96 ● HWC 1X2X96● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS LCVM8 200
MS LCVM8 200
● Height dimensions are the above-face-frame height when used as shown● Pre-packaged molding kit includes: ● LCVM8 ● STRM8 ● SIM8● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS LCVM8 300
Height A A Shown Min. Max. MS LCVM8 300 5 3⁄4” 4 5⁄16” 5 15⁄16”
MS LCVM8 300
● Height dimensions are the above-face-frame height when used as shown● Pre-packaged molding kit includes: ● DSCVM8 ● STRM8 ● SBIM8 (2)● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS DSCVM8 100
Height A A Shown Min. Max. MS DSCVM8 100 4 3⁄4” 3 7⁄8” 4 3⁄4”
MS DSCVM8 100
● Height dimension is the above-face-frame height when used as shown
● Pre-packaged molding kit includes: ● DSCVM8 ● LBM8 ● HWC 1X2X96 (2)● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS DSCVM8 200
MS DSCVM8 200
● Height dimensions are the above-face-frame height when used as shown● Pre-packaged molding kit includes: ● DSCVM8 ● TBIM8 ● CLBM8 ● HWC 1X2X96● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS DSCVM8 300
Height A A Shown Min. Max. MS DSCVM8 300 4 5⁄8” 4 5⁄8” 6 1⁄4”
MS DSCVM8 300
● Height dimensions are the above-face-frame height when used as shown● Pre-packaged molding kit includes: ● LCVM8 ● CLTM8 ● HWC 1X2X96● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS LCVM8 100
Height A A Shown Min. Max. MS LCVM8 100 4 7⁄16” 4 1⁄8” 4 7⁄16”
MS LCVM8 100
MO
LDIN
G
185M
OLD
ING
184
Construction Options (see page 52): ■ = Available for selected SKUs
MOLDING: Molding StacksMOLDING: Molding Stacks
Designer Resources Link: resources.woodmarkcabinetry.com American Woodmark Designer’s Choice Specification Guide
● Height dimensions are the above-face-frame height when used as shown
● Pre-packaged molding kit includes: ● DLCVM8 ● S3S396 ● CR8 ● HWC 1X2X96● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS DLCVM8 200
MS DLCVM8 200
● Height dimensions are the above-face-frame height when used as shown● Pre-packaged molding kit includes: ● DLCVM8 ● OGE8 ● OGP8 ● HWC 1X2X96● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS DLCVM8 300
Height A A Shown Min. Max. MS DLCVM8 300 6” 4 7⁄8” 7 1⁄16”
MS DLCVM8 300
● Height dimension is the above-face-frame height when used as shown
● Pre-packaged molding kit includes: ● CM8 WD ● DCTM8 ● SBIM8 ● HWC 3/4X3/4X96● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS CM8 100
MS CM8 100
● Height dimensions are the above-face-frame height when used as shown
● Pre-packaged molding kit includes: ● CM8 WD ● CLTM8 ● STRM8● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS CM8 200
MS CM8 200
● Height dimensions are the above-face-frame height when used as shown● Pre-packaged molding kit includes: ● CM8 WD ● CLBM8 ● CBE8 ● HWC 1X2X96● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS CM8 300
Height A A Shown Min. Max. MS CM8 300 5 1⁄16” 4 3⁄8” 5 9⁄16”
MS CM8 300
● Height dimensions are the above-face-frame height when used as shown● Pre-packaged molding kit includes: ● DLCVM8 ● DCTM8 ● HWC 1X2X96● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS DLCVM8 100
Height A A Shown Min. Max. MS DLCVM8 100 4 1⁄16” 3 13⁄16” 4 9⁄16”
MS DLCVM8 100
Height A A Shown Min. Max. MS DLCVM8 200 5 3⁄4” 5 1⁄16” 6 1⁄16”
Height A A Shown Min. Max. MS CM8 200 4” 2 7⁄8” 4”
MO
LDIN
G
187M
OLD
ING
186
Construction Options (see page 52): ■ = Available for selected SKUs
MOLDING: Molding StacksMOLDING: Molding Stacks
Designer Resources Link: resources.woodmarkcabinetry.com American Woodmark Designer’s Choice Specification Guide
● Height dimension is the above-face-frame height when used as shown
● Pre-packaged molding kit includes: ● ● LCM8 WD ● LBM8 ● SBIM8 ● HWC 1X2X96 (2)● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS LCM8 200
MS LCM8 200
● Height dimensions are the above-face-frame height when used as shown● Pre-packaged molding kit includes: ● ● LCM8 WD ● OGP8 ● HWC 1X2X96● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS LCM8 300
Height A A Shown Min. Max. MS LCM8 300 5 1⁄2” 4 1⁄8” 6”
MS LCM8 300
● Height dimension is the above-face-frame height when used as shown
● Pre-packaged molding kit includes: ● ● CCM8 WD ● DM8 WD ● SIM8 ● HWC 1X2X96● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS CCM8 100
MS CCM8 100
● Height dimensions are the above-face-frame height when used as shown
● Pre-packaged molding kit includes: ● ● CCM8 WD ● STRM8 ● SBIM8● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS CCM8 200
MS CCM8 200
● Height dimensions are the above-face-frame height when used as shown● Pre-packaged molding kit includes: ● ● CCM8 WD ● TBIM8 ● CLBM8 ● HWC 1X2X96● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS CCM8 300
Height A A Shown Min. Max. MS CCM8 300 5 1⁄2” 5 1⁄16” 6 1⁄4”
MS CCM8 300
● Height dimensions are the above-face-frame height when used as shown● Pre-packaged molding kit includes: ● ● LCM8 WD ● CLTM8 ● HWC 3/4X3/4X96● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS LCM8 100
Height A A Shown Min. Max. MS LCM8 100 3 1⁄16” 2 15⁄16” 3 5⁄16”
MS LCM8 100
Height A A Shown Min. Max. MS CCM8 200 4” 3 5⁄8” 4 3⁄4”
MO
LDIN
G
189M
OLD
ING
188
Construction Options (see page 52): ■ = Available for selected SKUs
MOLDING: Molding StacksMOLDING: Molding Stacks
Designer Resources Link: resources.woodmarkcabinetry.com American Woodmark Designer’s Choice Specification Guide
● Height dimension is the above-face-frame height when used as shown
● Pre-packaged molding kit includes: ● ● TCCM8 WD ● RM8 WD ● CR8 ● HWC 3/4X3/4X96 ● HWC 1X2X96● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS TCCM8 200
MS TCCM8 200
● Height dimensions are the above-face-frame height when used as shown● Pre-packaged molding kit includes: ● ● TCCM8 WD ● OGP8 ● TBIM8 ● HWC 1X2X96● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS TCCM8 300
Height A A Shown Min. Max. MS TCCM8 300 5 5⁄8” 4 1⁄2” 6 1⁄2”
MS TCCM8 300
● Height dimensions are the above-face-frame height when used as shown
● Pre-packaged molding kit includes: ● ● XLCM8 WD ● S3S396 ● TBE8 ● HWC 1X2X96● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS XLCM8 100
MS XLCM8 100
● Height dimension is the above-face-frame height when used as shown
● Pre-packaged molding kit includes: ● ● XLCM8 WD ● DCTM8 ● CBE8 ● HWC 1X2X96● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS XLCM8 200
MS XLCM8 200
● Height dimensions are the above-face-frame height when used as shown● Pre-packaged molding kit includes: ● ● XLCM8 WD ● OGP8 ● SBIM8 ● HWC 1X2X96● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS XLCM8 300
Height A A Shown Min. Max. MS XLCM8 300 6” 4 11⁄16” 7 1⁄16”
MS XLCM8 300
● Height dimensions are the above-face-frame height when used as shown● Pre-packaged molding kit includes: ● ● TCCM8 WD ● SBIM8 (2) ● STRM8● Molding Stacks shipped unassembled● Molding Stacks to be cut, assembled and field
installed at job site● Only one finish can be specified per Molding Stack● All door styles are solid wood finished to match
cabinet box exterior● Molding Stack diagram included ● Refer to specifications on individual molding
included in molding stack
Molding StackMS TCCM8 100
Height A A Shown Min. Max. MS TCCM8 100 5” 3 15⁄16” 5 1⁄4”
MS TCCM8 100
Height A A Shown Min. Max. MS XLCM8 100 5” 4 1⁄8” 5 15⁄16”
MO
LDIN
G
191M
OLD
ING
190
Construction Options (see page 52): ■ = Available for selected SKUs
MOLDING: Molding StacksMOLDING: Molding Stacks
Designer Resources Link: resources.woodmarkcabinetry.com American Woodmark Designer’s Choice Specification Guide
Decorative Large Cove Molding
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long
Decorative Small Cove Molding
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long
● Wood, Painted and Duraform (Breeze, Cascade, Drift) door styles feature solid wood finished to match cabinet box exterior
● Duraform (Linen, Silk, Stone) door styles feature Duraform wrapped MDF
● When ordered as a Molding Stack, Duraform door styles are finished to match cabinet box exterior
● 8 feet long
Angle Crown Molding
DSCVM8 DLCVM8 ACM8
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long
Small Cove Molding
SCVM8
● For Breeze, Cascade and Drift finishes only● Features textured PVC-wrapped engineered wood
finished to match cabinet door● 8 feet long
Angle Crown MoldingDuraform Textured
ACM8 DT
● For Breeze, Cascade and Drift finishes only● Features textured PVC-wrapped engineered wood
finished to match cabinet door● 8 feet long
Small Cove MoldingDuraform Textured
SCVM8 DT
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long
Large Cove Molding
● Wood, Painted and Duraform (Breeze, Cascade, Drift) door styles feature solid wood finished to match cabinet box exterior
● Duraform (Linen, Silk, Stone) door styles feature Duraform wrapped MDF
● When ordered as a Molding Stack, Duraform door styles are finished to match cabinet box exterior
● 8 feet long
Soffit Crown Molding
LCVM8SCM8 WD
● For Breeze, Cascade and Drift finishes only● Features textured PVC-wrapped engineered wood
finished to match cabinet door● 8 feet long
Large Cove MoldingDuraform Textured
LCVM8 DT
● Wood, Painted and Duraform (Breeze, Cascade, Drift) door styles feature solid wood finished to match cabinet box exterior
● Duraform (Linen, Silk, Stone) door styles feature Duraform wrapped MDF
● When ordered as a Molding Stack, Duraform door styles are finished to match cabinet box exterior
● 8 feet long
Crown Molding
● Wood, Painted and Duraform (Breeze, Cascade, Drift) door styles feature solid wood finished to match cabinet box exterior
● Duraform (Linen, Silk, Stone) door styles feature Duraform wrapped MDF
● When ordered as a Molding Stack, Duraform door styles are finished to match cabinet box exterior
● May use CBE8, DM8 WD, RM8 WD, SBIM8, SIM8, TBE8 or TBIM8 as accent
● 8 feet long
Classic Crown MoldingLarge Crown Molding
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long
CM8 WD LCM8 WD CCM8 WD
MO
LDIN
G
193M
OLD
ING
192
Construction Options (see page 52): ■ = Available for selected SKUs
MOLDING: Moldings MOLDING: Moldings
Designer Resources Link: resources.woodmarkcabinetry.com American Woodmark Designer’s Choice Specification Guide
● Wood, Painted and Duraform (Breeze, Cascade, Drift) door styles feature solid wood finished to match cabinet box exterior
● Duraform (Linen, Silk, Stone) door styles feature Duraform wrapped MDF
● When ordered as a Molding Stack, Duraform door styles are finished to match cabinet box exterior
● May use CBE8, DM8 WD, RM8 WD, SBIM8, SIM8, TBE8 or TBIM8 as accent
● 8 feet long
Traditional Classic Crown Molding
Extra Large Crown Molding
3
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long
TCCM8 WD XLCM8 WD
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long
Starter Molding
STRM8
● Wood, Painted and Duraform (Breeze, Cascade, Drift) door styles feature veneer wrapped MDF finished to match cabinet box exterior (LR8 WD)
● Duraform (Linen, Silk, Stone) door styles are Duraform wrapped MDF finished to match cabinet box exterior (LR8)
● 8 feet long
Light Rail Molding
● Wood, Painted and Duraform (Breeze, Cascade, Drift) door styles feature solid wood finished to match cabinet box exterior
● Duraform (Linen, Silk, Stone) door styles feature Duraform wrapped MDF
● When ordered as a Molding Stack, Duraform door styles are finished to match cabinet box exterior
● 8 feet long
Traditional Light Rail Molding
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long
Small Traditional Light Rail Molding
LR8LR8 WD
STLR8 TLR8
● All door styles feature solid wood finished to match cabinet box exterior
● May use CBE8, RM8 WD, SBIM8, SIM8, TBE8 or TBIM8 as accent
● 8 feet long
Inset Light Rail Molding
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long
Ogee Light Rail Molding
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long
Square Light Rail Molding
OGLR8 SQLR8 ILR8
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long● Can be used as light rail molding
Countertop Edge Molding
● All door styles feature solid wood finished to match cabinet box exterior
● May use CBE8, DM8 WD, RM8 WD, SBIM8, SIM8, TBE8 or TBIM8 as accent
● 8 feet long
Square Inset Light Rail Molding
SQILR8 CTM8 WD
● For Breeze, Cascade and Drift finishes only● Features textured PVC-wrapped engineered wood
finished to match cabinet door● Can be used as light rail molding● 8 feet long
Countertop Edge MoldingDuraform Textured
CTM8 DT
MO
LDIN
G
195M
OLD
ING
194
Construction Options (see page 52): ■ = Available for selected SKUs
MOLDING: Moldings MOLDING: Moldings
Designer Resources Link: resources.woodmarkcabinetry.com American Woodmark Designer’s Choice Specification Guide
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long● Can be used as light rail molding
Decorative Countertop Edge Molding
DCTM8
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long
Mirror Molding
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long
Ogee Molding
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long
Shaker Mirror Molding
SMM8 MM8
● All door styles feature solid wood finished to match cabinet box exterior
● May be used as accent on CCM8 WD, SQILR8, TCCM8 WD and ILR8
● 8 feet long
Shaker Insert Molding
● All door styles feature solid wood finished to match cabinet box exterior
● May be used as accent on CCM8 WD, SQILR8, TCCM8 WD and ILR8
● 8 feet long
Single Bead Insert Molding
OGE8 SIM8 SBIM8 RM8 WD DM8 WD
● All door styles feature solid wood finished to match cabinet box exterior
● May be used as accent on CCM8 WD, SQILR8, TCCM8 WD and ILR8
● 8 feet long
Triple Bead Insert Molding
TBIM8
● All door styles feature solid wood finished to match cabinet box exterior
● May be used as accent on CCM8 WD, SQILR8, TCCM8 WD and ILR8
● 8 feet long
Center Beaded Insert Molding
● All door styles feature solid wood finished to match cabinet box exterior
● May be used as accent on CCM8 WD, SQILR8, TCCM8 WD and ILR8
● 8 feet long
Triple Bead Edge Molding
● All door styles feature solid wood finished to match cabinet box exterior
● May be used as accent on CCM8 WD, SQILR8, TCCM8 WD and ILR8
● 8 feet long
Rope Molding
CBE8 TBE8
● All door styles feature solid wood finished to match cabinet box exterior
● May be used as accent on CCM8 WD and TCCM8 WD
● 8 feet long
Dentil Molding
AS4S396 3”S4S696 6”
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long● May also be used in vertical applications (as a filler)
or horizontal applications (as furniture toe)
4-Sided Stock
S4S396S4S696
MO
LDIN
G
197M
OLD
ING
196
Construction Options (see page 52): ■ = Available for selected SKUs
MOLDING: Moldings MOLDING: Moldings
Designer Resources Link: resources.woodmarkcabinetry.com American Woodmark Designer’s Choice Specification Guide
AS3S396 3”S3S696 6”
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long● May also be used in vertical applications (as a filler)
or horizontal applications (as furniture toe)
3-Sided Stock
S3S396S3S696
● For Breeze, Cascade and Drift finishes only● Features textured PVC-wrapped engineered wood
finished to match cabinet door● May also be used in vertical applications (as a
filler) or horizontal applications (as furniture toe)● 8 feet long
AS3S396 DT 3”S3S696 DT 6”
3-Sided StockDuraform Textured
S3S396 DTS3S696 DT
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long
Triple Bead Molding
TBM8
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long
Single Bead Molding Small Single Bead Molding
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long
SSBM8SBM8
● All door styles feature solid wood finished to match cabinet box exterior
● May be used as accent on Wall China, Wine Storage, Base Microwave and Void Door cabinets
● 8 feet long
Shaker Accent Molding
SAM8 WD
● All door styles feature solid wood finished to match cabinet box exterior
● May be used as accent on Wall China, Wine Storage, Base Microwave and Void Door cabinets
● 8 feet long
Single Bead Accent Molding
● All door styles feature solid wood finished to match cabinet box exterior
● May be used as accent on Wall China, Wine Storage, Base Microwave and Void Door cabinets
● 8 feet long
Triple Bead Accent Molding
SBAM8 WD TBAM8 WD
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long
Chair Rail Molding
CR8
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long
Square Chair Rail Molding
SQCR8
● All door styles feature solid wood finished to match cabinet box exterior
● Can be used as light rail molding● 8 feet long
Classic Trim Molding
CLTM8
● All door styles feature solid wood finished to match cabinet box exterior
● May use CBE8, RM8 WD, SBIM8, SIM8, TBE8 or TBIM8 as accent
● 8 feet long
Library Molding
LBM8
MO
LDIN
G
199M
OLD
ING
198
Construction Options (see page 52): ■ = Available for selected SKUs
MOLDING: Moldings MOLDING: Moldings
Designer Resources Link: resources.woodmarkcabinetry.com American Woodmark Designer’s Choice Specification Guide
● Wood, Painted and Duraform (Breeze, Cascade, Drift) door styles feature solid wood finished to match cabinet box exterior
● Duraform (Linen, Silk, Stone) door styles feature Duraform wrapped MDF
● When ordered as a Molding Stack, Duraform door styles are finished to match cabinet box exterior
● For use in furniture toe or top molding applications● 8 feet long
Ogee Pilaster Molding
OGP8
● All door styles feature solid wood finished to match cabinet box exterior
● For use in furniture toe or top molding applications ● 8 feet long
Classic Baseboard Molding
CLBM8
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long
Quarter Round Molding
QR8
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long
Wide Batten Molding
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long
Batten Molding
BM8 WD
WBM8
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long
Inside Corner Molding
QM8 WD
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long
Decorative Inside Corner Molding
ICM8
● For Breeze, Cascade and Drift finishes only● Features textured PVC-wrapped engineered wood
finished to match cabinet door● 8 feet long
Inside Corner MoldingDuraform Textured
QM8 DT
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long
Outside Corner Molding
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long
Angled Outside Corner Molding
OCM8
AOSC8
Outside Corner MoldingDuraform Textured
OCM8 DT
● For Breeze, Cascade and Drift finishes only● Features textured PVC-wrapped engineered wood
finished to match cabinet door● 8 feet long
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long
Straight Trim Molding
UM8 WD
MO
LDIN
G
201M
OLD
ING
200
Construction Options (see page 52): ■ = Available for selected SKUs
MOLDING: Moldings MOLDING: Moldings
Designer Resources Link: resources.woodmarkcabinetry.com American Woodmark Designer’s Choice Specification Guide
Panels, Fillers & Decorative Items
203
● For Breeze, Cascade and Drift finishes only● Features textured PVC-wrapped engineered wood
finished to match cabinet door● 8 feet long
Scribe MoldingDuraform Textured
SM8 DT
● All door styles feature solid wood finished to match cabinet box exterior
● 8 feet long
Scribe Molding
SM8 WD
● Unfinished● HWC 1/2X1/2X96 and HWC 3/4X3/4X96 are
shipped in two 48’’ long pieces
Cleat
HWC 1/2X1/2X96HWC 3/4X3/4X96HWC 1X2X96HWC 2X4X96
A B HWC 1/2X1/2X96 1⁄2’’ 1⁄2’’HWC 3/4X3/4X96 3⁄4’’ 3⁄4’’HWC 1X2X96 3⁄4’’ 1 1⁄2’’ HWC 2X4X96 1 1⁄2’’ 3 1⁄2’’
Cabinet Angle Molding
● All door styles feature solid wood finished to match cabinet box exterior● Used in corner application to place cabinet at 45-degree angle● Cannot be installed on cabinets with the Furniture Ends Option● 8 feet long
CAM8
MO
LDIN
G
203
Construction Options (see page 52): ■ = Available for selected SKUs
MO
LDIN
G202202
MO
LDIN
GM
OLD
ING
202
PAN
ELS,
FIL
LERS
& D
ECO
RATI
VE IT
EMS
MOLDING: Moldings