VARIABLE/PROGRAMMABLE ATTENUATORS
2-1
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Variable/Programmable Attenuators
DC-18GHz, 2-300W, 0-127dB
Wide Choice of Attenuation & Frequency Ranges & Step Sizes
Stable Attenuation Accuracy
High reliability & Long Switch Life
TTL\CMOS Interface and Driver
Circuitry Available
Custom Designs Available
Description
Variable/step attenuators can be used to adjust the power signal level continuously or by step within certain
frequency range, they can also be used to adjust the test system's power level as inset attenuators, it is small
with high accuracy and high stability etc.
Programmable attenuators are generally used to control the power level of microwave signals with
TTL\CMOS driver control manner and designed for use in automatic test equipment (ATE) systems operating
in the dc to 18 GHz frequency range.
In this section, you can find the Variable/step/programmable attenuators with individual data sheets
containing product description, specifications and outline drawings by a quick reference guide.
Order Information
Connector Type Dimensions Type
GKTS xx – x – xx –xx – xx – xx
Model No. Frequency Range (GHz)
Average Power (W) Attenuation Value (dB)
Step Size
Please confirm with us the main parameters of attenuators such as average power, attenuation value,
frequency range, step size, connector type and dimensions Type (if have any), or your special demand.
VARIABLE/PROGRAMMABLE ATTENUATORS
2-2
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Continuous Variable Attenuators
Continuous Variable Attenuators...1W-300W DC-4GHz
Model
Number
Average
Power (W)
Frequency
Range (GHz)
Attenuation
Range(dB)
MAX
VSWR
Insertion
Loss(dB)
Connector
Type
Page
No Pictures
GKTS50 50 0.9-4 0-10 1.5 ≤1.0 N 2-5
GKTS75 75 0.9-4 0-15 1.5 ≤1.0 N 2-6
GKTS100 100 0.9-10.5 0-20 1.6 ≤1.5 N 2-7
GKTS300 300 0.9-10.5 0-25 1.6 ≤1.5 N 2-8
GKTS2-50-4-E 2 0.5-4 0-20 1.5 ≤0.5 N(F,F) 2-9
GKTS-C 1 DC-2.5 0-16 1.5 / N,SMA 2-10
KTS-5 5 DC-2 10-60dB(1GHz)
10-50dB(1-2GHz)1.5 ≤10 N,SMA 2-11
Rotary Step Attenuators
Rotary Step Attenuators...2W,10W DC-18GHz
Model
Number
Average
Power (W)
Frequency
Range (GHz)
Attenuation
Range(dB)
MAX
VSWR
Insertion
Loss(dB)
Connector
Type
Page
No Pictures
GKTSX-1-1-6-A1 2,10 DC-6 0-1/0.1 1.25-1.40 ≤1.0 SMA,N
2-12 GKTSX-1-10-6-A1 2,10 DC-6 0-10/1 1.25-1.40 ≤1.0 SMA,N
GKTSX-1-60-6-A1 2,10 DC-6 0-60/10 1.25-1.40 ≤1.0 SMA,N
GKTSX-1-90-3-A1 2,10 DC-3 0-90/10 1.25-1.30 ≤0.5 SMA,N
GKTSX-2-11-6-A2 2,10 DC-6 0-11/0.1 1.30-1.60 ≤1.8 SMA,N
2-13
GKTSX-2-50-2.5-A2 2,10 DC-2.5 0-50/1 1.30-1.35 ≤1.0 SMA,N
GKTSX-2-70-6-A2 2,10 DC-6 0-70/1 1.30-1.60 ≤1.8 SMA,N
GKTSX-2-100-3-A2 2,10 DC-3 0-100/1 1.30-1.45 ≤1.2 SMA,N
GKTSX-1-9-18-A5 2,10 DC-18 0-9/1 1.40-1.60 ≤1.2 SMA(F,F) 2-14
GKTSX-1-90-18-A5 2,10 DC-18 0-90/10 1.40-1.60 ≤1.5 SMA(F,F)
VARIABLE/PROGRAMMABLE ATTENUATORS
2-3
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Rotary Step Attenuators
Rotary Step Attenuators...2W,10W DC-18GHz
Model
Number
Average
Power (W)
Frequency
Range (GHz)
Attenuation
Range(dB)
Max
VSWR
Insertion
Loss(dB)
Connector
Type
Page
No Pictures
GKTSX-2-69-18-A6 2,10 DC-18 0-70/1 1.50-1.75 ≤1.5 SMA(F,F) 2-15
GKTSX-2-99-18-A6 2,10 DC-18 0-99/1 1.50-1.75 ≤1.5 SMA(F,F)
GKTSX-2-70-18-A7 2,10 DC-18 0-69/1 1.50-1.75 ≤1.75 N(M,F) 2-16
GKTSX-2-99-18-A7 2,10 DC-18 0-99/1 1.50-1.75 ≤1.75 N(M,F)
GKTSX-1-9-26.5-A7 2,10 DC-26.5 0-9/1 1.70 ≤1.8 2.92mm(F,F) 2-17
GKTSX-1-70-26.5-A7 2,10 DC-26.5 0-70/10 1.75 ≤1.8 2.92mm(F,F)
GKTSX-2-11-6-A3 2,10 DC-6 0-11/0.1 1.40-1.65 ≤1.8 N(F,F)
2-18 GKTSX-2-70-6-A3 2,10 DC-6 0-70/1 1.40-1.65 ≤1.8 N(F,F)
GKTSX-2-100-3-A3 2,10 DC-3 0-100/1 1.40-1.45 ≤1.2 N(F,F)
GKTSX-3-71-6-A4 2,10 DC-6 0-71/0.1 1.50-1.75 ≤2.5 N(F,F) 2-19
GKTSX-3-101-3-A4 2,10 DC-3 0-101/0.1 1.50-1.60 ≤1.7 N(F,F)
Pushbutton Step Attenuators
Pushbutton Step Attenuators... 2W,5W,10W DC-3GHz
Model
Number
Average
Power (W)
Frequency
Range (GHz)
Attenuation
Range(dB)
Max
VSWR
Insertion
Loss(dB)
Connector
Type
Page
No Pictures
GKTSxx-1-20-3-B 2,5,10 DC-3 0-20/20 1.30 ≤0.75 N,SMA 2-20
GKTSxx-2-30-3-B 2,5,10 DC-3 0-30/10 1.40 ≤2.0 N,SMA 2-21
GKTSxx-4-10-3-B 2,5,10 DC-3 0-10/1 1.40-1.50 ≤2.5 N,SMA 2-22
GKTSxx-5-20-3-B 2,5,10 DC-3 0-20/1 1.40-1.50 ≤3.0 N,SMA 2-23
GKTSxx-5-30-3-B 2,5,10 DC-3 0-30/1 1.40-1.50 ≤3.0 N,SMA
GKTSxx-6-40-3-B 2,5,10 DC-3 0-40/1 1.40-1.50 ≤3.0 N,SMA 2-24
GKTSxx-8-10-3-B 2,5,10 DC-3 0-10/0.1 1.40-1.50 ≤1.8 N,SMA 2-25
GKTSxx-8-60-3-B 2,5,10 DC-3 0-60/1 1.40-1.50 ≤3.5 N, SMA, BNC,F
2-26
GKTSxx-8-70-3-B 2,5,10 DC-3 0-70/1 1.40-1.50 ≤3.5 N,SMA 2-27
GKTSxx-8-90-3-B 2,5,10 DC-3 0-90/1 1.40-1.50 ≤3.5 N,SMA 2-28
GKTS25-5-23-3-B 25 DC-3 0-23/1 1.30-1.60 ≤7.0 N 2-29
GKTS25-5-30-3-B 25 DC-3 0-30/1 1.30-1.60 ≤7.0 N 2-30
VARIABLE/PROGRAMMABLE ATTENUATORS
2-4
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Programmable Attenuators
Programmable Attenuators...0.2W- 30W DC-18GHz
Model
Number
Average
Power(W)
Frequency
Range(GHz)
Attenuation
Range(dB)
Max
VSWR
Insertion
Loss(dB)
Connector
Type
Page
No Pictures
SHX371 Serial
1 DC-18 11/1 ≤1.750.6dB+
0.09dB/GHzSMA,N
2-30
2-31
2-32
1 DC-18 70/10 ≤1.750.6dB+
0.09dB/GHzSMA,N
1 DC-18 90/10 ≤1.750.6dB+
0.09dB/GHzSMA,N
1 DC-18 110/10 ≤1.750.6dB+
0.09dB/GHzSMA,N
SHX-GKTS-FS1/1-121-18-
SMA DC-18 121/1 ≤2.0 ≤7.8 SMA 2-33
GKTS-F Serial 2 DC-3 127/1 ≤1.45 ≤4.50 SMA(F,F) 2-34
GKTS-FD Serial 2 DC-3 127/1 ≤1.45 ≤4.50 SMA(F,F) 2-35
GKTS-FC Serial 2 DC-3 127/1 ≤1.45 ≤4.50 SMA(F,F) 2-36
GKTS-FS1/1 1,2 DC-5 127/1 / ≤10.0 N(K) 2-37
GKTS-FS2/2 1,2 DC-5 127/1 / ≤10.0 N(K) 2-38
GKTS-G Serial
2 DC-5 15/1 ≤1.5 ≤4.0 SMA(F,F)
2-39 2 DC-5 70/10 ≤1.5 ≤4.0 SMA(F,F)
2 DC-5 90/1 ≤1.6 ≤6.0 SMA(F,F)
GKTS-H Serial 1 0.2-6.0 110/0.25 ≤2.0 ≤13.0 SMA(F,F) 2-40 2-41
SHX-GKTS100-31-NK 100 0.05-3 31/1 ≤1.65 ≤2.5 N 2-42
VARIABLE/STEP ATTENUATORS
2-5
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model GKTS50 0.9-4GHz 50 Watts
MECHANICAL SPECIFICATIONS
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
NOMINAL IMPEDANCE: 50Ω
AVERAGE POWER: 50W
CONNECTOR TYPE: N (F, F)
Notes:
1. Dimensions Tolerance ±3%
2. Custom designs available for other special attenuation value & accuracy
Connectors Female Pin Housing Temp Range Dimensions Weight
Brass Nickel
Plated
Beryllium Copper
Gold Plated
Aluminum,
Black Anodize-40°C~+65°C 120×96.5×75mm 1.2Kg
Model
Number
Frequency
Range(GHz)
Bandwidth
(MHz)
Attenuation
Accuracy(dB)
Attenuation
Range(dB)
Max
VSWR
Insertion
Loss(dB)
GKTS50-10 0.9-4 100
±0.5 0-10 1.5 ≤1.0 200
Continuous variable attenuators can be used to adjust the power signal level continuously within certain frequency range without power off, they can also be used to adjust the test system's power level as inset attenuators, it is small with high accuracy and high stability etc.
GKTS50 continuous variable attenuators' average power 50W, frequency range from 0.9-4GHz.
通
VARIABLE/STEP ATTENUATORS
2-6
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model GKTS75 0.9-4GHz 75 Watts
MECHANICAL SPECIFICATIONS
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
NOMINAL IMPEDANCE: 50Ω
AVERAGE POWER: 75W
CONNECTOR TYPE: N (F, F)
Notes:
1. Dimensions Tolerance ±3%
2. Custom designs available for other special attenuation value & accuracy
Connectors Female Pin Housing Temp Range Dimensions Weight
Brass Nickel
Plated
Beryllium Copper
Gold Plated
Aluminum,
Black Anodize-40°C~+65°C 135×98×75mm 1.5Kg
Model Number
Frequency Range(GHz)
Bandwidth(MHz)
Attenuation Accuracy(dB)
AttenuationRange(dB)
Max VSWR
Insertion Loss(dB)
GKTS75-10
0.9-4
100
±0.5
0-10
1.5 ≤1.0 200
GKTS75-15 100
0-15 200
Continuous variable attenuators can be used to adjust the power signal level continuously within certain frequency range without power off, they can also be used to adjust the test system's power level as inset attenuators, it is small with high accuracy and high stability etc.
GKTS75 continuous variable attenuators' average power 75W, frequency range from 0.9-4GHz.
VARIABLE/STEP ATTENUATORS
2-7
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model GKTS100 0.9-10.5GHz 100 Watts
MECHANICAL SPECIFICATIONS
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
NOMINAL IMPEDANCE: 50Ω
AVERAGE POWER: 100W
CONNECTOR TYPE: N (F, F)
Notes:
1. Dimensions Tolerance ±3%
2. Custom designs available for other special attenuation value & accuracy
Connectors Female Pin Housing Temp Range Dimensions Weight
Brass Nickel
Plated
Beryllium Copper
Gold Plated
Aluminum,
Black Anodize-40°C~+65°C 190×102×75mm 2Kg
Model Number
Frequency Range(GHz)
Bandwidth(MHz)
Attenuation Accuracy(dB)
Attenuation Range(dB)
Max VSWR
Insertion Loss(dB)
GKTS100-10
0.9-4
100
±0.5
0-10
1.50 ≤1.0 200
GKTS100-20 100
0-20 200
GKTS100-15 5-6 100
±1.0
0-15 1.55 ≤1.2 200
GKTS100-12 9.5-10.5 100
0-12 1.60 ≤1.5 200
Continuous variable attenuators can be used to adjust the power signal level continuously within certain frequency range without power off, they can also be used to adjust the test system's power level as inset attenuators, it is small with high accuracy and high stability etc.
GKTS100 continuous variable attenuators' average power 100W, frequency range from 0.9-10.5GHz. 通
VARIABLE/STEP ATTENUATORS
2-8
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model GKTS300 0.9-10.5GHz 300 Watts
MECHANICAL SPECIFICATIONS
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
NOMINAL IMPEDANCE: 50Ω
AVERAGE POWER: 300W
CONNECTOR TYPE: N (F, F)
Notes:
1. Dimensions Tolerance ±3%
2. Custom designs available for other special attenuation value & accuracy
Connectors Female Pin Housing Temp Range Dimensions Weight
Brass Nickel
Plated
Beryllium Copper
Gold Plated
Aluminum,
Black Anodize-40°C~+65°C 259×102×75mm 2.6Kg
Model Number
Frequency Range(GHz)
Bandwidth(MHz)
Attenuation Accuracy(dB)
Attenuation Range(dB)
Max VSWR
Insertion Loss(dB)
GKTS300-10
0.9-4
100
±0.5
0-10
1.50 ≤1.0 200
GKTS300-25 100
0-25 200
GKTS300-15 5-6 100
±1.0
0-15 1.55 ≤1.2 200
GKTS300-12 9.5-10.5 100
0-12 1.60 ≤1.5 200
Continuous variable attenuators can be used to adjust
the power signal level continuously within certain frequency
range without power off, they can also be used to adjust the
test system's power level as inset attenuators, it is small with
high accuracy and high stability etc.
GKTS300 continuous variable attenuators' average
power 300W, frequency range from 0.9-10.5GHz.
通
VARIABLE/STEP ATTENUATORS
2-9
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model GKTS2-50-4-E 0.5-4GHz 2 Watts
MECHANICAL SPECIFICATIONS
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
NOMINAL IMPEDANCE: 50Ω
AVERAGE POWER: 2W
CONNECTOR TYPE: N (F, F)
Notes:
1. Dimensions Tolerance ±5%
2. Custom designs available for other special attenuation value & accuracy
Connectors Female Pin Housing Temp Range Dimensions Weight
Brass Nickel
Plated
Beryllium Copper
Gold Plated
Aluminum,
Blue Spray Painting-40°C~+65°C 186×19×157(Max167)mm 805g
Model
Number
Frequency
Range(GHz)
Bandwidth
(MHz)
Attenuation
Range(dB)
Max
VSWR
Insertion
Loss(dB)
GKTS2-50-4-E 0.5-4 200 >20dB(f:1GHz)
15dB~16dB(f<1GHz)1.5 ≤0.5
Continuous variable attenuators can be used to adjust the power signal level continuously within certain frequency range without power off, they can also be used to adjust the test system's power level as inset attenuators, it is small with high accuracy and high stability etc.
GKTS2-50-4-E continuous variable attenuators' average power 2W, frequency range from 0.5-4GHz.
VARIABLE/STEP ATTENUATORS
2-10
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model GKTS-C DC-2.5GHz 1 Watts
GKTS-C-N GKTS-C-SMA
MECHANICAL SPECIFICATIONS
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
NOMINAL IMPEDANCE: 50Ω
AVERAGE POWER: 1W
CONNECTOR TYPE: N (F,F) SMA (F,F)
Notes:
1. Dimensions Tolerance ±2%
Connectors Female Pin Housing Temp Range Dimensions Weight
Brass Nickel
Plated
Beryllium Copper
Gold Plated Aluminum -40°C~+65°C
N:47.5×20×42mm
SMA:41×20×38mm 65g
Model Number Frequency Range(GHz) Attenuation Value (dB)
GKTS-1-C DC-2.5
0-10
GKTS-2-C 0-16
Continuous Variable attenuators can be used to adjust the power signal level by step within certain frequency range without power off, they can also be used to adjust the test system's power level as inset attenuators, it is small with high accuracy and high stability etc.
GKTS-C continuous variable attenuators' average power 1W, frequency range from DC-2.5GHz.
VARIABLE/STEP ATTENUATORS
2-11
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model KTS-5 DC-2GHz 5 Watts
MECHANICAL SPECIFICATIONS
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
NOMINAL IMPEDANCE: 50Ω
AVERAGE POWER: 50W
CONNECTOR TYPE: N (F, F)
Notes:
1. Dimensions Tolerance ±5%
2. Custom designs available for other special attenuation value & accuracy
Connectors Female Pin Housing Temp Range Dimensions Weight
Brass Nickel
Plated
Beryllium Copper
Gold Plated
Aluminum,
Blue Spray Painting-40°C~+65°C 205×115×80mm 250g
Model
Number
Attenuation
Range(dB)
Insertion
Loss(dB)
Direct Reading Dial
Calibrate Frequency(MHz)
Max
VSWR
KTS-5 10-60dB(1GHz)
10 900
≤1.5 10-50dB(1-2GHz) 1800
Continuous variable attenuators can be used to adjust the power signal level continuously within certain frequency range without power off, they can also be used to adjust the test system's power level as inset attenuators, it is small with high accuracy and high stability etc.
KTS-5 continuous variable attenuators' average power 5W, frequency range from DC-2GHz.
VARIABLE/STEP ATTENUATORS
2-12
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model GKTSX-1-XX-X-A1 DC-6GHz 2,10 Watts
MECHANICAL SPECIFICATIONS Connectors Brass Nickel Plated
Female Pin Beryllium Copper Gold Plated
Housing Brass Nickel Plated, Aluminum
Temp Range -20°C~+85°C
Dimensions Ø30×63mm(Without Connector)
Weight 250g
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
NOMINAL IMPEDANCE: 50Ω
AVERAGE POWER: 2W,10W
PEAK POWER: 100W (5μs pulse width with 0.5% duty cycle)
CONNECTOR TYPE: SMA(F,F); N(F,F);
Notes:
1. Dimensions Tolerance ±5%
2. Custom designs available for other special attenuation value & accuracy
Model Number Frequency
Range(GHz) Attenuation Step Size
Max VSWR
Insertion Loss(dB)
Attenuation Accuracy(dB)
GKTSX-1-1-2.5-A1 DC-2.5
0-1dB in 0.1dB steps
1.25 ≤0.5 ±0.2
GKTSX-1-1-3-A1 DC-3 1.30 ≤0.5 GKTSX-1-1-4.3-A1 DC-4.3 1.35 ≤0.75 ±0.3 GKTSX-1-1-6-A1 DC-6 1.40 ≤1.0 ±0.3
GKTSX-1-10-2.5-A1 DC-2.5
0-10dB in 1dB steps
1.25 ≤0.4 ±0.4 GKTSX-1-10-3-A1 DC-3 1.30 ≤0.5 ±0.5
GKTSX-1-10-4.3-A1 DC-4.3 1.35 ≤0.75 ±0.5 GKTSX-1-10-6-A1 DC-6 1.40 ≤1.0 ±0.5
GKTSX-1-60-2.5-A1 DC-2.5
0-60dB in 10dB steps
1.25 ≤0.4 ±0.5 GKTSX-1-60-3-A1 DC-3 1.30 ≤0.5 ±0.5(<50dB)
±0.8 or ±3% (≥50dB)
GKTSX-1-60-4.3-A1 DC-4.3 1.35 ≤0.75 GKTSX-1-60-6-A1 DC-6 1.40 ≤1.0
GKTSX-1-90-2.5-A1 DC-2.5 0-90dB in
10dB steps
1.25 ≤0.4 ±0.5(<50dB) ±3%(≥50dB)
GKTSX-1-90-3-A1 DC-3 1.30 ≤0.5 ±0.5(<50dB)
±3.5%(≥50dB)
Rotary Step attenuators are used to adjust the power signal level by step within certain frequency range without power off, they can also be used to adjust the test system's power level as inset attenuators, it is small with high accuracy and high stability etc.
GKTS serial A1 type rotary step attenuators' average power is 2W, 10W, frequency range from DC-6GHz, attenuation value 0-90dB by 0.1dB/ 1dB/ 10dB step.
VARIABLE/STEP ATTENUATORS
2-13
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model GKTSX-2-XX-X-A2 DC-6GHz 2,10 Watts
MECHANICAL SPECIFICATIONS Connectors Brass Nickel Plated Female Pin Beryllium Copper Gold Plated Housing Brass Nickel Plated, Aluminum Temp Range -20°C~+85°C Dimensions Ø30×120mm(Without Connector)Weight 435g
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
NOMINAL IMPEDANCE: 50Ω
AVERAGE POWER: 2W,10W
PEAK POWER: 100W (5μs pulse width with 0.5% duty cycle)
CONNECTOR TYPE: SMA (F,F); N(F,F)
Notes:
1. Dimensions Tolerance ±5%
2. Custom designs available for other special attenuation value & accuracy
Model Number
Frequency Range(GHz)
AttenuationStep Size
Max VSWR InsertionLoss(dB)
Attenuation Accuracy(dB) SMA N
GKTSX-2-11-2.5-A2 DC-2.5
0-11dB in 0.1dB steps
1.30 1.45 ≤1.0 ±0.2dB(≤1dB) ±0.4dB(>1dB)
GKTSX-2-11-3-A2 DC-3 1.35 1.45 ≤1.2 ±0.3dB(≤1dB) ±0.5dB(>1dB)
GKTSX-2-11-4.3-A2 DC-4.3 1.40 1.55 ≤1.5 GKTSX-2-11-6-A2 DC-6 1.55 1.60 ≤1.8
GKTSX-2-50-2.5-A2 DC-2.5 0-50dB in 1dB steps
1.30 1.35 ≤1.0 ±0.5dB(≤10dB)
±0.8dB or 3% (≤50dB)GKTSX-2-70-2.5-A2 DC-2.5
0-70dB in 1dB steps
1.30 1.45 ≤1.0 ±0.5dB(≤10dB)
±0.8dB or 3% (<60dB)±1.5dB or 3% (≥60dB)
GKTSX-2-70-3-A2 DC-3 1.35 1.45 ≤1.2 GKTSX-2-70-4.3-A2 DC-4.3 1.40 1.55 ≤1.5 GKTSX-2-70-6-A2 DC-6 1.55 1.60 ≤1.8
GKTSX-2-100-2.5-A2 DC-2.5 0-100dB in 1dB steps
1.30 1.45 ≤1.0 ±0.5dB(≤10dB)
±0.8dB or 3% (<60dB)±1.5dB or 3% (<70dB)
±3.5% (≥70dB) GKTSX-2-100-3-A2 DC-3 1.35 1.45 ≤1.2
Rotary Step attenuators are used to adjust the power signal level by step within certain frequency range without power off, they can also be used to adjust the test system's power level as inset attenuators, it is small with high accuracy and high stability etc.
GKTS serial A2 type rotary step attenuators' average power is 2W, 10W, frequency range from DC-6GHz, attenuation value 0-100dB by 0.1dB/ 1dB step.
VARIABLE/STEP ATTENUATORS
2-14
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model GKTSX-1-XX-18-A5 DC-18GHz 2,10Watts
0-9dB
0-80dB
MECHANICAL SPECIFICATIONS
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
NOMINAL IMPEDANCE: 50Ω
AVERAGE POWER: 2W,10W
PEAK POWER: 200W (5μs pulse width with 0.5% duty cycles)
CONNECTOR TYPE: SMA (F,F)
Notes:
1. Dimensions Tolerance ±5%
2. Custom designs available for other special attenuation value & accuracy
Connectors Female Pin Housing Temp Range Dimensions Weight
Stainless Steel Beryllium Copper
Gold Plated Aluminum -20°C~+85°C
0~9dB:Ø48×97mm
0~80dB:Ø48×108.5mm
0~9dB:220g
0~80dB:280g
Model Number
Frequency Range(GHz)
AttenuationStep Size
Max VSWR
InsertionLoss(dB)
Attenuation Accuracy(dB)
GKTSX-1-9-8-A5 DC-8 0-9dB in
1dB steps
1.40 ≤0.8 ±0.6 GKTSX-1-9-12.4-A5 DC-12.4 1.50 ≤1.0 ±0.8 GKTSX-1-9-18-A5 DC-18 1.60 ≤1.2 ±1.0 GKTSX-1-90-8-A5 0.1-8
0-90dB in 10dB steps
1.40 ≤1.0 ±1.5(0~60)
±2.5 or 3.5%(70~90) GKTSX-1-90-12.4-A5 0.1-12.4 1.50 ≤1.2 GKTSX-1-90-18-A5 0.1-18 1.60 ≤1.5
Rotary Step attenuators are used to adjust the power signal level by step within certain frequency range, they can also be used to adjust the test system's power level as inset attenuators, it is small with high accuracy and high stability etc.
GKTS2-1-XX-18-A5 type rotary step attenuators' average power 2W,10W, frequency range from DC-18GHz, attenuation value 0-80dB by 1dB/ 10dB step.
VARIABLE/STEP ATTENUATORS
2-15
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model GKTSX-2-XX-18-A6 DC-18GHz 2,5 Watts
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
NOMINAL IMPEDANCE: 50Ω
AVERAGE POWER: 2W,5W
PEAK POWER: 200W (5μs pulse width with 0.5% duty cycle)
CONNECTOR TYPE: SMA (F,F)
Notes:
1. Dimensions Tolerance ±5%
2. Custom designs available for other special attenuation value & accuracy
MECHANICAL SPECIFICATIONS Connectors Stainless Steel Female Pin Beryllium Copper Gold PlatedHousing Aluminum Temp Range 0°C~+54°C Dimensions Ø48×163mm Weight 480g
Model Number
Frequency Range(GHz)
AttenuationStep Size
Max VSWR
Insertion Loss(dB)
Attenuation Accuracy(dB)
GKTSX-2-69-8-A6 DC-8
0-69dB in 1dB steps
1.50 ≤1.0
±0.5dB (0~9dB) ±1.0dB(10~19dB) ±1.5dB(20~49dB) ±2.0dB(50~70dB)
GKTSX-2-69-12.4-A6 DC-12.4 1.60 ≤1.25 ±0.8dB (0~9dB) ±1.0dB(10~19dB) ±1.5dB(20~49dB) ±2.0dB(50~70dB)
GKTSX-2-69-18-A6 DC-18 1.75 ≤1.5
GKTSX-2-99-8-A6 0.1-8
0-99dB in 1dB steps
1.50 ≤1.0
±0.5dB (0~9dB) ±1.0dB(10~19dB) ±1.5dB(20~49dB) ±2.0dB(50~69dB)
±2.5dB or 3.5%(70~99dB)
GKTSX-2-99-12.4-A6 0.1-12.4 1.60 ≤1.25 ±0.8dB (0~9dB)
±1.0dB(10~19dB) ±1.5dB(20~49dB) ±2.0dB(50~69dB)
±2.5dB or 3.5%(70~99dB) GKTSX-2-99-18-A6 0.1-18 1.75 ≤1.5
Rotary Step attenuators are used to adjust the power signal level by step within certain frequency range, they can also be used to adjust the test system's power level as inset attenuators, it is small with high accuracy and high stability etc. GKTS2-2-XX-18-A6 type rotary step attenuators' average power 2W,10W, frequency range from DC-18GHz, attenuation value 0-99dB by 1dB step.
VARIABLE/STEP ATTENUATORS
2-16
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 08-30-16
Model GKTSX-2-XX-18-A7 DC-18GHz 2,10 Watts
MECHANICAL SPECIFICATIONS
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
NOMINAL IMPEDANCE: 50Ω
AVERAGE POWER: 2W,10W
PEAK POWER: 200W (5μs pulse width with 0.5% duty cycle)
CONNECTOR TYPE: N(M, F), SMA(F,F)
Notes:
1. Dimensions Tolerance ±5%
2. Custom designs available for other special attenuation value & accuracy
Connectors Male Pin Female Pin Housing Temp Range Dimensions Weight
Brass Nickel
Plated
Brass Gold
Plated
Beryllium Copper
Gold Plated
Aluminum
Anodic Oxidation0°C~+54°C 141×102.5×82mm 914g
Model Number
Frequency Range(GHz)
AttenuationStep Size
Max VSWR
InsertionLoss(dB)
Attenuation Accuracy(dB)
GKTSX-2-69-8-A7 DC-8
0-69dB in 1dB steps
1.50 ≤1.25
±0.5dB(0~9dB) ±1.0dB(10~19dB) ±1.5dB(20~49dB) ±2.0dB(50~70dB)
GKTSX-2-69-12.4-A7 DC-12.4 1.60 ≤1.5 ±0.8dB(0~9dB) ±1.0dB(10~19dB) ±1.5dB(20~49dB) ±2.0dB(50~70dB)
GKTSX-2-69-18-A7 DC-18 1.75 ≤1.75
GKTSX-2-99-8-A7 0.1-8
0-99dB in 1dB steps
1.50 ≤1.25
±0.5dB(0~9dB) ±1.0dB(10~19dB) ±1.5dB(20~49dB) ±2.0dB(50~69dB)
±2.5dB or 3.5%(70~99dB)
GKTSX-2-99-12.4-A7 0.1-12.4 1.60 ≤1.5 ±0.8dB(0~9dB)
±1.0dB(10~19dB) ±1.5dB(20~49dB) ±2.0dB(50~69dB)
±2.5dB or 3.5% (70~99dB)GKTSX-2-99-18-A7 0.1-18 1.75 ≤1.75
Rotary Step attenuators are used to adjust the power signal level by step within certain frequency range, they can also be used to adjust the test system's power level as inset attenuators, it is small with high accuracy and high stability etc.
GKTSX-2-XX-18-A7 type rotary step attenuators' average power 2W,10W, frequency range from DC-18GHz, attenuation value 0-99dB by 1dB step.
VARIABLE/STEP ATTENUATORS
2-17
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model GKTSX-1-XX-26.5-A8 DC-26.5GHz 2,10 Watts
9dB 70dB
MECHANICAL SPECIFICATIONS
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
NOMINAL IMPEDANCE: 50Ω
AVERAGE POWER: 2W,10W, 25W
PEAK POWER: 200W (5μs pulse width with 0.5% duty cycle)
CONNECTOR TYPE: 3.5mm(F,F)
Notes:
1. Dimensions Tolerance ±5%
2. Custom designs available for other special attenuation value & accuracy
Connectors Male Pin Female Pin Housing Temp Range Dimensions Weight
Brass Nickel
Plated
Brass Gold
Plated
Beryllium Copper
Gold Plated
Aluminum
Anodic Oxidation0°C~+54°C
9dB: 81.5×102×82mm 525g
70dB: 97.5×102×82mm 635g
Model Number
Frequency Range(GHz)
Attenuation Step Size
Max VSWR
Insertion Loss(dB)
Attenuation Accuracy(dB)
GKTSX-1-9-26.5-A8 DC-26.5 0-9dB in
1dB steps 1.70 ≤1.8 ±1.0dB
GKTSX-1-70-26.5-A8 0.1-26.5 0-70dB in
10dB steps 1.75 ≤1.8 ±1.5dB or 4%
Rotary Step attenuators are used to adjust the power signal level by step within certain frequency range, they can also be used to adjust the test system's power level as inset attenuators, it is small with high accuracy and high stability etc.
GKTSX-2-XX-18-A8 type rotary step attenuators' average power 2W,10W, frequency range from DC-26.5GHz, attenuation value 0-70dB by 1dB/10dB step.
VARIABLE/STEP ATTENUATORS
2-18
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 08-30-16
Model GKTSX-2-XX-X-A3 DC-6GHz 2,10 Watts
B Type
MECHANICAL SPECIFICATIONS
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
NOMINAL IMPEDANCE: 50Ω
AVERAGE POWER: 2W,10W
PEAK POWER: 100W (5μs pulse width with 0.5% duty cycle)
CONNECTOR TYPE: N (F,F)
Notes:
1. Dimensions Tolerance ±5%
2. Custom designs available for other special attenuation value & accuracy
Connectors Female Pin Housing Temp Range Dimensions Weight
Brass Nickel
Plated
Beryllium Copper
Gold Plated
Aluminum,
Blue Spray Painting-20°C~+85°C 190.5×87×79mm 1Kg
Model Number
Frequency Range(GHz)
AttenuationStep Size
Max VSWR
InsertionLoss(dB)
Attenuation Accuracy(dB)
GKTSX-2-11-2.5-A3 DC-2.5
0-11dB in 0.1dB steps
1.40 ≤1.2
±0.3dB(≤1dB) ±0.5dB(>1dB)
GKTSX-2-11-3-A3 DC-3 1.45 GKTSX-2-11-4.3-A3 DC-4.3 1.50 ≤1.5 GKTSX-2-11-6-A3 DC-6 1.65 ≤1.8
GKTSX-2-70-2.5-A3 DC-2.5
0-70dB in 1dB steps
1.40 ≤1.2
±0.8dB or 3%(≤60dB)±1.5 dB or 3% (>60dB)
GKTSX-2-70-3-A3 DC-3 1.45 GKTSX-2-70-4.3-A3 DC-4.3 1.50 ≤1.5 GKTSX-2-70-6-A3 DC-6 1.65 ≤1.8
GKTSX-2-100-2.5-A3 DC-2.5 0-100dB in 1dB steps
1.40 ≤1.2
±0.8dB or 3%(<60dB) ±1.5dB or 3%(<70dB)
±3.5%(≥70dB) GKTSX-2-100-3-A3 DC-3 1.45
Rotary Step attenuators are used to adjust the power signal level by step within certain frequency range, they can also be used to adjust the test system's power level as inset attenuators, it is small with high accuracy and high stability etc.
GKTS serial A3 type rotary step attenuators' average power 2W,10W, frequency range from DC-6GHz, attenuation value 0-100dB by 0.1dB/ 1dB step.
1
23
4
56
78
9
10
dB
0 0
dB
1
VARIABLE/STEP ATTENUATORS
2-19
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 08-30-16
Model GKTSX-3-XX-X-A4 DC-6GHz 2,10 Watts
B Type
MECHANICAL SPECIFICATIONS
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
NOMINAL IMPEDANCE: 50Ω
AVERAGE POWER: 2W,10W
PEAK POWER: 100W (5μs pulse width with 2% duty cycle)
CONNECTOR TYPE: N (F, F)
Notes:
1. Dimensions Tolerance ±2%
2. Custom designs available for other special attenuation value & accuracy
Connectors Female Pin Housing Temp Range Dimensions Weight
Brass Nickel
Plated
Beryllium Copper
Gold Plated
Aluminum,
Blue Spray Painting-20°C~+85°C 250.5×87×79mm 1.25Kg
Model Number
Frequency Range(GHz)
AttenuationStep Size
Max VSWR
Insertion Loss(dB)
Attenuation Accuracy(dB)
GKTSX-3-71-2.5-A4 DC-2.5 0-71dB in
0.1dB steps
1.50 ≤1.5 ±0.3dB(0.1~1dB) ±0.4dB(1~10dB) ±0.8dB(10~60dB) ±1.5dB(≤71dB)
GKTSX-3-71-3-A4 DC-3 1.60 ≤1.7 GKTSX-3-71-4.3-A4 DC-4.3 1.70 ≤2.0 GKTSX-3-71-6-A4 DC-6 1.75 ≤2.5
GKTSX-3-101-2.5-A4 DC-2.5 0-101dB in 0.1dB steps
1.50 ≤1.5 ±0.2dB(0.1~1dB) ±0.4dB(1~10dB) ±0.8dB(10~60dB) ±1.5dB(<70dB) ±3.5%(≥70dB)
GKTSX-3-101-3-A4 DC-3 1.60 ≤1.7
Rotary Step attenuators are used to adjust the power signal level by step within certain frequency range, they can also be used to adjust the test system's power level as inset attenuators, it is small with high accuracy and high stability etc.
GKTS2-3-XX-X-A4 type rotary step attenuators' average power 2W,10W frequency range from DC-6GHz, attenuation value 0-101dB by 0.1dB step.
0
dB
9080
70
60 50
4030
20
10 1
23
4
56
78
9
10
dB
0 0
dB
1
VARIABLE/STEP ATTENUATORS
2-20
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model GKTSXX-1-20-4-B DC-4GHz 2,5,10 Watts
MECHANICAL SPECIFICATIONS
Connectors Brass Nickel Plated
Female Pin Beryllium Copper Gold Plated
Housing Aluminum, Anodic Oxidation
Temp Range -20°C~+85°C
Dimensions 64×35.5×20mm
Weight 65g
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
Model Number Frequency
Range(GHz) Attenuation Range(dB)
AttenuationStep(dB)
Attenuation Accuracy(dB) Max VSWR
InsertionLoss(dB)2W/5W 10W
GKTSXX-1-20-1-B DC-1
0-20dB in20dB steps
20
±0.2 ±0.4
1.30
≤0.4
GKTSXX-1-20-2.5-B DC-2.5 ±0.4 ±0.8 ≤0.6
GKTSXX-1-20-3-B DC-3 ±0.5 ±1.0 ≤0.75
GKTSXX-1-20-3.5-B DC-3.5 ±0.6 ±1.5 1.35 ≤1.0
GKTSXX-1-20-4-B DC-4 ±0.8 ±1.5 1.40 ≤1.2
Notes: XX refer to average power in W
NOMINAL IMPEDANCE: 50Ω, 75Ω
AVERAGE POWER: 2W, 5W, 10W
PEAK POWER: 100W (5μs pulse width with 2% duty cycle)
CONNECTOR TYPE: N, SMA, BNC, F
Notes:
1. Dimensions Tolerance ±5%
2. Dimensions and specifications refer to connector type N unless otherwise specified
3. Custom designs available for other special attenuation value & accuracy
Pushbutton Step attenuators can be used to adjust the
power signal level by step within certain frequency range, they
can also be used to adjust the test system's power level as inset
attenuators, it is small with high accuracy and high stability etc.
GKTS serial B type pushbutton step attenuators' average
power 2W-25W, frequency range from DC-4GHz, attenuation
value 0-90dB by 0.1dB / 1dB/ 10dB step.
VARIABLE/STEP ATTENUATORS
2-21
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model GKTSXX-2-30-4-B DC-4GHz 2,5,10 Watts
MECHANICAL SPECIFICATIONS
Connectors Brass Nickel Plated
Female Pin Beryllium Copper Gold Plated
Housing Aluminum, Anodic Oxidation
Temp Range -20°C~+85°C
Dimensions 78×35.5×20mm
Weight 80g
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
Notes: XX refer to average power in W
NOMINAL IMPEDANCE: 50Ω, 75Ω
AVERAGE POWER: 2W, 5W, 10W
PEAK POWER: 100W (5μs pulse width with 2% duty cycle)
CONNECTOR TYPE: N, SMA, BNC, F
Notes:
1. Dimensions Tolerance ±5%
2. Dimensions and specifications refer to connector type N unless otherwise specified
3. Custom designs available for other special attenuation value & accuracy
Model Number Frequency
Range(GHz) AttenuationRange(dB)
AttenuationStep(dB)
Attenuation Accuracy(dB)
Max VSWR
InsertionLoss(dB)
2W/5W 10W
GKTSXX-2-30-1-B DC-1
0-30dB in 10dB steps
10,20
±0.3 ±0.6
1.40
≤1.0
GKTSXX-2-30-2.5-B DC-2.5 ±0.5 ±1.0 ≤1.5
GKTSXX-2-30-3-B DC-3 ±0.75 ±1.5 ≤2.0
GKTSXX-2-30-3.5-B DC-3.5 ±0.8 ±2.51.45
1.50@10W ≤2.5
GKTSXX-2-30-4-B DC-4 ±1.0 / 1.50 ≤3.0
Pushbutton Step attenuators can be used to adjust the
power signal level by step within certain frequency range, they
can also be used to adjust the test system's power level as inset
attenuators, it is small with high accuracy and high stability etc.
GKTS serial B type pushbutton step attenuators' average
power 2W-25W, frequency range from DC-4GHz, attenuation
value 0-90dB by 0.1dB / 1dB/ 10dB step.
VARIABLE/STEP ATTENUATORS
2-22
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model GKTSXX-4-10-4-B DC-4GHz 2,5,10 Watts
MECHANICAL SPECIFICATIONS
Connectors Brass Nickel Plated
Female Pin Beryllium Copper Gold Plated
Housing Aluminum, Blue Spray Painting
Temp Range -20°C~+85°C
Dimensions 106×35.5×20mm
Weight 110g
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
Model Number
Frequency Range(GHz)
AttenuationRange(dB)
AttenuationStep(dB)
Attenuation Accuracy(dB) Max VSWR
InsertionLoss(dB)2W/5W 10W
GKTSXX-4-10-1-B DC-1
0-10dB in1dB steps
1,2,3,5
±0.3 ±0.5 1.4
≤1.0
GKTSXX-4-10-2.5-B DC-2.5 ±0.5 ±1.0 ≤1.8
GKTSXX-4-10-3-B DC-3 ±0.5 ±1.0 1.50 1.70@10W
≤2.5
GKTSXX-4-10-3.5-B DC-3.5 ±0.6 ±1.5 ≤3.0
GKTSXX-4-10-4-B DC-4 ±0.8 / 1.55 ≤3.5
Notes: XX refer to average power in W
NOMINAL IMPEDANCE: 50Ω, 75Ω
AVERAGE POWER: 2W, 5W, 10W
PEAK POWER: 100W (5μs pulse width with 2% duty cycle)
CONNECTOR TYPE: N, SMA, BNC, F
Notes:
1. Dimensions Tolerance ±5%
2. Dimensions and specifications refer to connector type N unless otherwise specified
3. Custom designs available for other special attenuation value & accuracy
Pushbutton Step attenuators can be used to adjust the
power signal level by step within certain frequency range, they
can also be used to adjust the test system's power level as inset
attenuators, it is small with high accuracy and high stability etc.
GKTS serial B type pushbutton step attenuators' average
power 2W-25W, frequency range from DC-4GHz, attenuation
value 0-90dB by 0.1dB / 1dB/ 10dB step.
VARIABLE/STEP ATTENUATORS
2-23
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model GKTSXX-5-30-4-B DC-4GHz 2,5,10 Watts
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
Model Number
Frequency Range(GHz)
AttenuationRange(dB)
AttenuationStep(dB)
Attenuation Accuracy(dB) Max VSWR
InsertionLoss(dB)2W/5W 10W
GKTSXX-5-20-1-B DC-1
0-20dB in1dB steps
1,2,4,8,10
±0.4 ±0.75 1.40
≤1.2
GKTSXX-5-20-2.5-B DC-2.5 ±0.75 ±1.5 ≤2.5
GKTSXX-5-20-3-B DC-3 ±1.0 ±2.0 1.50 1.70@10W
≤3.0
GKTSXX-5-20-3.5-B DC-3.5 ±1.2 ±3.0 ≤3.5
GKTSXX-5-20-4-B DC-4 ±1.5 / 1.55 ≤4.0
GKTSXX-5-30-1-B DC-1
0-30dB in1dB steps
1,2,4,8,16
±0.4 ±0.75 1.40
≤1.2
GKTSXX-5-30-2.5-B DC-2.5 ±0.75 ±1.5 ≤2.5
GKTSXX-5-30-3-B DC-3 ±1.0 ±2.0 1.50 1.70@10W
≤3.0
GKTSXX-5-30-3.5-B DC-3.5 ±1.2 ±3.0 ≤3.5
GKTSXX-5-30-4-B DC-4 ±1.5 / 1.55 ≤4.0
Notes: XX refer to average power in W
NOMINAL IMPEDANCE: 50Ω, 75Ω
AVERAGE POWER: 2W, 5W, 10W
PEAK POWER: 100W (5μs pulse width with 2% duty cycle)
CONNECTOR TYPE: N, SMA, BNC, F
Notes:
1. Dimensions Tolerance ±5%
2. Dimensions and specifications refer to connector type N unless otherwise specified
3. Custom designs available for other special attenuation value & accuracy
MECHANICAL SPECIFICATIONS
Connectors Brass Nickel Plated
Female Pin Beryllium Copper Gold Plated
Housing Aluminum, Blue Spray Painting
Temp Range -20°C~+85°C
Dimensions 120×35.5×20mm
Weight 125g
Pushbutton Step attenuators can be used to adjust the
power signal level by step within certain frequency range, they
can also be used to adjust the test system's power level as
inset attenuators, it is small with high accuracy and high
stability etc.
GKTS serial B type pushbutton step attenuators' average
power 2W-25W, frequency range from DC-4GHz, attenuation
value 0-90dB by 0.1dB / 1dB/ 10dB step.
VARIABLE/STEP ATTENUATORS
2-24
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model GKTSXX-6-40-4-B DC-4GHz 2,5,10 Watts
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
Notes: XX refer to average power in W
NOMINAL IMPEDANCE: 50Ω, 75Ω
AVERAGE POWER: 2W, 5W, 10W
PEAK POWER: 100W (5μs pulse width with 2% duty cycle)
CONNECTOR TYPE: N, SMA, BNC, F
Notes:
1. Dimensions Tolerance ±5%
2. Dimensions and specifications refer to connector type N unless otherwise specified
3. Custom designs available for other special attenuation value & accuracy
MECHANICAL SPECIFICATIONS
Connectors Brass Nickel Plated
Female Pin Beryllium Copper Gold Plated
Housing Aluminum, Blue Spray Painting
Temp Range -20°C~+85°C
Dimensions 134×35.5×20mm
Weight 140g
Model Number
Frequency Range(GHz)
AttenuationRange(dB)
AttenuationStep(dB)
Attenuation Accuracy(dB) Max VSWR
InsertionLoss(dB)2W/5W 10W
GKTSXX-6-40-1-B DC-1
0-40dB in 1dB steps
1,2,4,8,10,16
±0.5 ±1.0 1.40
≤1.5
GKTSXX-6-40-2.5-B DC-2.5 ±1.0 ±2.0 ≤2.5
GKTSXX-6-40-3-B DC-3 ±1.25 ±2.5 1..50 1.70@10W
≤3.0
GKTSXX-6-40-3.5-B DC-3.5 ±1.5 ±3.5 ≤4.0
GKTSXX-6-40-4-B DC-4 ±1.8 / 1.55 ≤4.5
Pushbutton Step attenuators can be used to adjust the
power signal level by step within certain frequency range, they
can also be used to adjust the test system's power level as inset
attenuators, it is small with high accuracy and high stability etc.
GKTS serial B type pushbutton step attenuators' average
power 2W-25W, frequency range from DC-4GHz, attenuation
value 0-90dB by 0.1dB / 1dB/ 10dB step.
VARIABLE/STEP ATTENUATORS
2-25
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model GKTSXX-8-10-3-B DC-3GHz 2,5,10 Watts
MECHANICAL SPECIFICATIONS
Connectors Brass Nickel Plated
Female Pin Beryllium Copper Gold Plated
Housing Aluminum, Blue Spray Painting
Temp Range -20°C~+85°C
Dimensions 162×35.5×20mm
Weight 170g
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
Notes: XX refer to average power in W
NOMINAL IMPEDANCE: 50Ω, 75Ω
AVERAGE POWER: 2W, 5W, 10W
PEAK POWER: 100W (5μs pulse width with 2% duty cycle)
CONNECTOR TYPE: N, SMA, BNC, F
Notes:
1. Dimensions Tolerance ±5%
2. Dimensions and specifications refer to connector type N unless otherwise specified
3. Custom designs available for other special attenuation value & accuracy
Model Number
Frequency Range(GHz)
AttenuationRange(dB)
AttenuationStep(dB)
Attenuation Accuracy(dB) Max VSWR
InsertionLoss(dB)2W/5W 10W
GKTSXX-8-10-1-B DC-1 0-10dB in
0.1dB steps0.1,0.2,0.3,0.5,1,2,3,5
±0.25 ±0.5 1.40 ≤1.5
GKTSXX-8-10-2.5-B DC-2.5 ±0.5 ±0.75 1.50 ≤1.8
GKTSXX-8-10-3-B DC-3 ±0.8 ±1.0
Pushbutton Step attenuators can be used to adjust the
power signal level by step within certain frequency range, they
can also be used to adjust the test system's power level as inset
attenuators, it is small with high accuracy and high stability etc.
GKTS serial B type pushbutton step attenuators' average
power 2W-25W frequency range from DC-4GHz, attenuation
value 0-90dB by 0.1dB / 1dB/ 10dB step.
VARIABLE/STEP ATTENUATORS
2-26
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model GKTSXX-8-60-4-B DC-4GHz 2,5,10 Watts
MECHANICAL SPECIFICATIONS
Connectors Brass Nickel Plated
Female Pin Beryllium Copper Gold Plated
Housing Aluminum, Blue Spray Painting
Temp Range -20°C~+85°C
Dimensions 162×35.5×20mm
Weight 170g
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
Notes: XX refer to average power in W
NOMINAL IMPEDANCE: 50Ω, 75Ω
AVERAGE POWER: 2W, 5W, 10W
PEAK POWER: 100W (5μs pulse width with 2% duty cycle)
CONNECTOR TYPE: N, SMA, BNC, F
Notes:
1. Dimensions Tolerance ±5%
2. Dimensions and specifications refer to connector type N unless otherwise specified
3. Custom designs available for other special attenuation value & accuracy
Model Number
Frequency Range(GHz)
AttenuationRange(dB)
AttenuationStep(dB)
Attenuation Accuracy(dB) Max VSWR
InsertionLoss(dB)2W/5W 10W
GKTSXX-8-60-1-B DC-1
0-60dB in1dB steps
1,2,4,8,10,10,10,16
±0.5dB(0-10dB)±0.8dB(10-50dB)±3%dB(≥50dB)
Single step
±0.6dB 1.40
≤1.5
GKTSXX-8-60-2.5-B DC-2.5 ±0.8dB(0-10dB)
±1.25dB(10-50dB)±3%dB(≥50dB)
Single step
±0.8dB ≤3.0
GKTSXX-8-60-3-B DC-3 ±0.8dB(0~10dB)±2dB(10~50dB)±4%dB(≥50dB)
Single step
±0.8dB 1.5 ≤3.5
GKTSXX-8-60-3.5-B DC-3.5 ±1.0dB(0-10dB)±1.5dB(10-50dB)±3%dB(≥50dB)
/ 1.60 ≤4.5
GKTSXX-8-60-4-B DC-4 ±1.2dB(0~10dB)±2.5dB(10~50dB)±4%dB(≥50dB)
/ 1.75 ≤5.0
Pushbutton Step attenuators can be used to adjust the
power signal level by step within certain frequency range, they
can also be used to adjust the test system's power level as inset
attenuators, it is small with high accuracy and high stability etc.
GKTS serial B type pushbutton step attenuators' average
power 2W-25W, frequency range from DC-4GHz, attenuation
value 0-90dB by 0.1dB / 1dB/ 10dB step.
VARIABLE/STEP ATTENUATORS
2-27
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model GKTSXX-8-70-4-B DC-4GHz 2,5,10 Watts
MECHANICAL SPECIFICATIONS
Connectors Brass Nickel Plated
Female Pin Beryllium Copper Gold Plated
Housing Aluminum, Blue Spray Painting
Temp Range -20°C~+85°C
Dimensions 162×35.5×20mm
Weight 170g
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
Notes: XX refer to average power in W
NOMINAL IMPEDANCE: 50Ω, 75Ω
AVERAGE POWER: 2W, 5W, 10W
PEAK POWER: 100W (5μs pulse width with 2% duty cycle)
CONNECTOR TYPE: N, SMA, BNC, F
Notes:
1. Dimensions Tolerance ±5%
2. Dimensions and specifications refer to connector type N unless otherwise specified
3. Custom designs available for other special attenuation value & accuracy
Model Number
Frequency Range(GHz)
AttenuationRange(dB)
AttenuationStep(dB)
Attenuation Accuracy(dB) Max VSWR
InsertionLoss(dB)2W/5W 10W
GKTSXX-8-70-1-B DC-1
0-70dB in1dB steps
1,2,4,8,10,10,16,20
±0.5dB(0-10dB)±0.8dB(10-50dB)±3%dB(≥50dB)
Single step ±0.6dB
1.40
≤2.0
GKTSXX-8-70-2.5-B DC-2.5 ±0.8dB(0-10dB)
±1.25dB(10-50dB)±3%dB(≥50dB)
Single step ±0.8dB
≤3.5
GKTSXX-8-70-3-B DC-3 ±0.8dB(0~10dB)±2dB(10~50dB)±4%dB(≥50dB)
Single step ±0.8dB
1.50 ≤3.5
GKTSXX-8-70-3.5-B DC-3.5 ±1.0dB(0-10dB)±2.0dB(10-50dB)±4%dB(≥50dB)
/ 1.60 ≤4.5
GKTSXX-8-70-4-B DC-4 ±1.2dB(0~10dB)±2.5dB(10~50dB)±4.5%dB(≥50dB)
/ 1.75 ≤5.0
Pushbutton Step attenuators can be used to adjust the
power signal level by step within certain frequency range, they
can also be used to adjust the test system's power level as inset
attenuators, it is small with high accuracy and high stability etc.
GKTS serial B type pushbutton step attenuators' average
power 2W-25W, frequency range from DC-4GHz, attenuation
value 0-90dB by 0.1dB / 1dB/ 10dB step.
VARIABLE/STEP ATTENUATORS
2-28
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model GKTSXX-8-90-4-B DC-4GHz 2,5,10 Watts
MECHANICAL SPECIFICATIONS
Connectors Brass Nickel Plated
Female Pin Beryllium Copper Gold Plated
Housing Aluminum, Blue Spray Painting
Temp Range -20°C~+85°C
Dimensions 162×35.5×20mm
Weight 170g
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
Model Number
Frequency Range(GHz)
AttenuationRange(dB)
AttenuationStep(dB)
Attenuation Accuracy(dB) Max VSWR
InsertionLoss(dB)2W/5W 10W
GKTSXX-8-90-1-B DC-1
0-90dB in1dB steps
1,2,4,8,16,20,20,20
±0.5dB(0-10dB)±0.8dB(10-50dB)±3%dB(≥50dB)
Single step
±0.6dB 1.40
≤2.0
GKTSXX-8-90-2.5-B DC-2.5 ±0.8dB(0-10dB)
±1.25dB(10-50dB)±3%dB(≥50dB)
Single step
±0.8dB ≤3.5
GKTSXX-8-90-3-B DC-3 ±0.8dB(0-10dB)±2dB(10-50dB)±4%dB(≥50dB)
Single step
±1.0dB 1.50 ≤3.5
GKTSXX-8-90-3.5-B DC-3.5 ±1.0dB(0-10dB)±2dB(10-50dB)±4%dB(≥50dB)
/ 1.60 ≤4.5
GKTSXX-8-90-4-B DC-4 ±1.2dB(0-10dB)±2.5dB(10-50dB)±4.5%dB(≥50dB)
/ 1.75 ≤5.0
Notes: XX refer to average power in W
NOMINAL IMPEDANCE: 50Ω, 75Ω
AVERAGE POWER: 2W, 5W, 10W
PEAK POWER: 100W (5μs pulse width with 2% duty cycle)
CONNECTOR TYPE: N,SMA,BNC,F
Notes:
1. Dimensions Tolerance ±5%
2. Dimensions and specifications refer to connector type N unless otherwise specified
3. Custom designs available for other special attenuation value & accuracy
Pushbutton Step attenuators can be used to adjust the
power signal level by step within certain frequency range, they
can also be used to adjust the test system's power level as inset
attenuators, it is small with high accuracy and high stability etc.
GKTS serial B type pushbutton step attenuators' average
power 2W-25W, frequency range from DC-4GHz, attenuation
value 0-90dB by 0.1dB / 1dB/ 10dB step.
VARIABLE/STEP ATTENUATORS
2-29
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model GKTS25-5-30-3.5-B DC-3.5GHz 25 Watts
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
NOMINAL IMPEDANCE: 50Ω, 75Ω
AVERAGE POWER: 25W
CONNECTOR TYPE: N
Notes:
1. Dimensions Tolerance ±5%
2. Dimensions and specifications refer to connector type N unless otherwise specified
3. Custom designs available for other special attenuation value & accuracy
MECHANICAL SPECIFICATIONS
Connectors Brass Nickel Plated
Female Pin Beryllium Copper Gold Plated
Housing Aluminum, Sandblasting anodized
Temp Range -20°C~+85°C
Dimensions 134×42.5×34mm
Weight 215g
Model Number
Frequency Range(GHz)
AttenuationRange(dB)
AttenuationStep(dB)
Attenuation Accuracy(dB)
Max VSWR
InsertionLoss(dB)
GKTS25-5-23-1-B DC-1
0-23dB in1dB steps
1,2,4,8,8
±1.25dB 1.30 ≤5.5 GKTS25-5-23-2.5-B DC-2.5 ±1.6dB 1.60 ≤6.5 GKTS25-5-23-3-B DC-3 ±2.0dB 1.60 ≤7.0
GKTS25-5-23-3.5-B DC-3.5 ±2.5dB 1.80 ≤9.0 GKTS25-5-30-1-B DC-1
0-30dB in1dB steps
1,2,4,8,16
±1.25dB 1.30 ≤5.5 GKTS25-5-30-2.5-B DC-2.5 ±2.0dB 1.60 ≤6.5 GKTS25-5-30-3-B DC-3 ±2.5dB 1.60 ≤7.0
GKTS25-5-30-3.5-B DC-3.5 ±3.0dB 1.80 ≤9.0
Pushbutton Step attenuators can be used to adjust the power signal level by step within certain frequency range, they can also be used to adjust the test system's power level as inset attenuators, it is small with high accuracy and high stability etc.
GKTS serial B type pushbutton step attenuators' average power 2W-25W, frequency range from DC-4GHz, attenuation value 0-90dB by 0.1dB / 1dB/ 10dB step.
输入端
PROGRAMMABLE ATTENUATORS
2-30
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model SHX371 Serial DC-18GHz Programmable/Mechanical Attenuators
DESCRIPTION
With excellent electronical and mechanical performance, SHX-371 serial programmable/mechanical attenuators are used
to high frequency attenuation system, they are feature wideband frequency range, low VSWR, long life cycle, high
repeatability and stability etc.
Through being connected with the special computer’s interface circuit or external instruments (or circuit panels) produced
by Shanghai Huaxiang Co.,Ltd, SHX-371 serial programmable/manual attenuator produced by Huaxiang can realize the
attenuation of radio frequency power ,and come through the auto control or manual transition in programmable/manual. The
products are widely used in scientific research, aviation military, broadcast, weather service and medical treatment where
attenuation in high frequency is in use. The main parameters have been close to or reached the one of the world’s famous
company. The serial productions contain two controlling manners, the programmable one and the manual one.
11dB/1dB Step 110dB/10dB Step 121dB/1dB Step
MODEL NUMBER
SHX371 4---
11- 11dB/1dB GHz C- Manual 4- 4cells 70- 70dB/10dB F- Programmable
90- 90dB/10dB 100- 100dB/10dB
Example
SHX3714-70-18-C means SHX371 serial programmable/mechanical attenuator with 4 cell, 70dB total attenuation value
and 10dB step,Frequency range DC-18GHz, manual control.
SHX3714-90-18-F means SHX371 serial programmable/mechanical attenuator with 4 cell, 90dB total attenuation value
and 10dB step,Frequency range DC-18GHz, TTL control.
Notes:
1. Dimensions Tolerance ±2%
2. Custom designs available for other special attenuation value & accuracy
Model No. Cells Attenuator Value/step Frequency Control type
PROGRAMMABLE ATTENUATORS
2-31
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model SHX371 Serial DC-18GHz Programmable/Mechanical Attenuators
DESCRIPTION
Model Number: SHX-371
Average Power: 1W (100W pulse with 10μS width)
Frequency Range: DC~18GHz
Operating Voltage: 24V
Control Voltage: 3.3~5V (Pulse width 50mS~1S)
Control current: 0.02-0.8mA A
Source operation current: ≥2A
State switch time: ≤20ms
Repeatability of attenuation: 0.05dB
Working life: 106
Connector Type: SMA
Operation temperature: -20~+70 B
Storage temperature: -55~+85
Dimensions: Mechanical: 157.5×50×41mm
Programmable: 143.5×50×41.5mm
Weight: Mechanical: 355g (4cells), Programmable:420g (4cells)
ELECTRICAL SPECIFICATIONS
Frequency Range (GHz)
Attenuation Value & Accuracy (dB) VSWR
Insertion Loss(dB) 11 50 90 110
DC-8 ±0.8 ±1.6 ±3.2 ±4.0 ≤1.6
0.6+0.09/GHz DC-12.4 ±0.8 ±2.1 ±3.2 ±4.5 ≤1.6
DC-18 ±1.0 ±2.1 ±3.7 ±4.5 ≤1.75
Notes:
1. Dimensions Tolerance ±5%
2. Custom designs available for other special attenuation value & accuracy
PROGRAMMABLE ATTENUATORS
2-32
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model SHX371 Serial DC-18GHz Programmable/Mechanical Attenuators
PRODUCT REFERENCE
Model Number
AttenuationValue(dB)
Attenuation Steps(dB)
CellsValue
Cell No.1(dB) Cell No.2(dB) Cell No.3(dB) Cell No.4(dB)
ThroughAtt.
StepsThrough
Att. Steps
Through Att.
Steps Through
Att. Steps
SHX3714-11-XX-C/F 11 1 4 0 1 0 4 0 2 0 4 SHX3714-70-XX-F 70 10 4 0 10 0 20 0 20 0 20
SHX3714-90-XX-C/F 90 10 4 0 10 0 40 0 20 0 20 SHX3714-110-XX-C/F 110 0 4 0 10 0 40 0 20 0 40
ELECTRICAL SCHEMATIC & MECHANICAL
B
When need corresponding attenuations input high other control point input low
A
Table2: Outline and Installation Size of Different Model
B*: N type: 28, Units: (mm)
Notes:
1. Dimensions Tolerance ±5%
2. Custom designs available for other special attenuation value & accuracy
Dimensions A B* C D E F
Manual 4 cells 114.4 8.3 38 29.2 103.4 135.8
Programmable 4 cells 114.4 8.3 44.3 6 103.4 135.8
Outline and Installation Size
A
B
Fig.1
C
D
E
F
PROGRAMMABLE ATTENUATORS
2-33
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
SHX-GKTS-FS1/1-121-18-SMA single channel programmable attenuation unit is an instrument which can
measure and attenuate signal, frequency range is DC-18GHz including 11dB/1dB, 50dB/10dB, 70dB/10dB,
90dB/10dB, 110dB/10dB step programmable attenuators. The max attenuation is 121dB with 1dB step. You can
adjust the total attenuation value by local LCD+keypad+knob, or remote ethernet method.
Model SHX-GKTS-FS1/1-121-18-SMA DC-18GHz
ELECTRICAL SPECIFICATIONS Model Number: SHX-GKTS-FS1/1-121-18-SMA Frequency Range: DC~18GHz VSWR: ≤1.5 (DC-6GHz) ≤2.0 (6-18 GHz) Attenuation Range: 121dB/1dB step Attenuation Accuracy: DC-6 GHz ±0.5 (1, 2, 4dB) ±0.8 (10, 20dB) ±1.2 (40dB) 6-18 GHz ±0.8 (1, 2, 4dB) ±1.0 (10, 20dB) ±1.5 (40dB) Insertion Loss: ≤6.0 dB (DC-6GHz) ≤9.0 dB (6-18 GHz) Response Time: ≤20mS Remote Interface: RS232 or LAN AC Supply: AC ~220V±10% 50Hz Operation Surrounding: Operation Temperature:-20~+70, Relative Humidity:<90% Dimensions: 470×255×130mm Weight: 3.5Kg
Notes:
1. Dimensions Tolerance ±3%
2. Custom designs available for other special attenuation value & accuracy
PROGRAMMABLE ATTENUATORS
2-34
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model GKTS-F DC-3GHz 2 Watts
MECHANICAL SPECIFICATIONS Connectors Brass Gold Plated Female Pin Beryllium Copper Gold Plated
Housing F,FD: Aluminum, Nickel FC: Aluminum, Anodic Oxidation
Temp Range -55°C~+71°C
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
Notes: XX refer to control manner, F for +5V,FD for TTL and FC for RS232.
NOMINAL IMPEDANCE: 50Ω AVERAGE POWER: 2W SWITCH TIME: 6ms OPERATING VOLTAGE: +5V OPERATING CURRENT: 100mA/Cell CONNECTOR TYPE: SMA (F, F) Notes: 1. Dimensions Tolerance ±5% 2. Specifications refer to type F unless otherwise specified. 3. Custom designs available for other special attenuation value & accuracy.
Model Number Cells Frequency
Range (GHz) AttenuationRange(dB)
Attenuation Step(dB)
MaxVSWR
Insertio Loss(dB)
Attenuation Accuracy(dB)
≤10 16/20/32
GKTS2-4-55-1-XX 4
DC-1 0-55dB in5dB steps
5,10,20,20 1.25 ≤1.5 ±0.3 ±1.0
GKTS2-4-55-2-XX DC-2 1.30 ≤2.0 ±0.6 ±1.2
GKTS2-4-70-1-XX 4
DC-1 0-70dB in10dB steps
10,20,20,20 1.25 ≤1.5 ±0.3 ±1.0
GKTS2-4-70-2-XX DC-2 1.30 ≤2.0 ±0.6 ±1.2
GKTS2-5-31-1-XX
5
DC-1 0-31dB in1dB steps
1,2,4,8,16
1.30 ≤1.8 ±0.3 ±1.0
GKTS2-5-31-2-XX DC-2 1.35 ≤2.5 ±0.6 ±1.0
GKTS2-5-31-3-XX DC-3 1.45 ≤3.2 ±0.8 ±1.2
GKTS2-6-63-1-XX
6
DC-1 0-63dB in1dB steps
1,2,4,8,16,32
1.30 ≤2.5 ±0.3 ±1.2
GKTS2-6-63-2-XX DC-2 1.40 ≤3.5 ±0.6 ±1.2
GKTS2-6-63-3-XX DC-3 1.45 ≤4.5 ±0.8 ±1.5
GKTS2-8-127-1-XX
8
DC-1 0-127dB in1dB steps
1,2,4,8,16,32,32,32
1.30 ≤3.0 ±0.3 ±1.2
GKTS2-8-127-2-XX DC-2 1.45 ≤3.5 ±0.6 ±1.2
GKTS2-8-127-3-XX DC-3 1.55 ≤5.0 ±0.8 ±1.5
GKTS2-8-63.75-1-XX
8
DC-1 0-63.75dB in0.25dB steps
0.25,0.5,1,2,4,8,16,32
1.30 ≤3.0 ±0.3 ±1.2
GKTS2-8-63.75-2-XX DC-2 1.40 ≤3.5 ±0.6 ±1.2
GKTS2-8-63.75-3-XX DC-3 1.45 ≤5.0 ±0.8 ±1.5
GKTS2-10-64.5-1-XX
10
DC-1 0-64.5dB in0.1dB steps
0.1,0.2,0.4,0.8,1,2,4,8,16,32
1.30 ≤3.5 ±0.4 ±1.2
GKTS2-10-64.5-2-XX DC-2 1.45 ≤4.5 ±0.6 ±1.2
GKTS2-10-64.5-3-XX DC-3 1.55 ≤6.0 ±0.8 ±1.5
GKTS2-12-127-1-XX 12
DC-1 0-127dB in0.1dB steps
0.1,0.2,0.4,0.8,1,2,4,8,16,32,32,32
1.45 ≤4.5 ±0.5 ±1.25
GKTS2-12-127-2-XX DC-2 1.60 ≤6.0 ±0.8 ±1.5
Programmable attenuators are generally used to control power level of microwave signals by volts control or computer programmable auto control manner. They are small with high accuracy and high stability etc.
GKTS-F serial programmable attenuators' average power 2W, frequency range from DC-3GHz, attenuation value 0-127dB by 0.1/0.25/0.5/1/10dB step. MCU-drive circuit could be designed to control programmable attenuator according to Customer’s demand.
PROGRAMMABLE ATTENUATORS
2-35
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model GKTS-F DC-3GHz 2 Watts
F Series:
Operating Voltage: +5V
Operating Current: 100mA/cell
50mA/cell
FD Series:
Control Voltage: +5V
Control Current: 100mA/Cell, 50mA/cell
Driver Voltage: 2.7-5V
Driver Current: ≥15mA/Cell
TTL 1 2 3 4 5 6 7 8 9 10 11 12 13 14
4 Cells 55/5dB V+ 5 COM 10 N 20 N 20 N N / / / /
4 Cells 70/10dB V+ 10 COM 20 N 20 N 20 N N / / / /
5 Cells 31/1dB V+ 1 COM 2 N 4 N 8 N 16 / / / /
6 Cells 63/1dB V+ 1 COM 2 N 4 N 8 32 16 / / / /
8 Cells 63.75/0.25dB N N 16 N COM V+ N 1 0.5 2 0.25 4 8 32
8 Cells 127/1dB N N 32 N COM V+ N 32 2 4 1 8 16 32
10 Cells 64.5/0.1dB 16 32 8 N COM V+ N 0.8 0.4 1 0.2 2 4 0.1
12 Cells 127/0.1dB 32 2 16 4 COM 8 0.4 V+ 0.2 0.8 0.1 1 32 32
N: Empty, COM: 0V, V+: Operating Voltage
Notes:
1. Dimensions Tolerance ±5%
2. Specifications refer to type F unless otherwise specified.
3. Custom designs available for other special attenuation value & accuracy.
Cells A B C D F Series
Weight (g)FD SeriesWeight(g)
4 Cells 74.5 55.5 49.5±0.2 29 80 95 5 Cells 85 66 60±0.2 29 95 110 6 Cells 95.5 76.5 70.5±0.2 29 105 125 8 Cells 116.5 97.5 91.5±0.2 47.6 135 150
10 Cells 137.5 118.5 112.5±0.2 37.5 160 180 12 Cells 158.5 139.5 133.5±0.2 37.5 190 210
4816 32dB12
深
124 32dB0.250.516 8
PROGRAMMABLE ATTENUATORS
2-36
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model GKTS-F DC-3GHz 2 Watts
FC Series:
Interface: RS-232, Provide computer controlling interface and
communication protocol
Voltage: Provide AC~220V/5V power
Dimensions(mm) A B C Weight(g)
4 Cells 115.5 96.5 91.5±0.2 205
5 Cells 126 107 102±0.2 260
6 Cells 136.5 117.5 112.5±0.2 310
8 Cells 157.5 138.5 133.5±0.2 415
FC Series:
Interface: RS-232, Provide computer controlling interface and
communication protocol
Voltage: Provide AC~220V/5V power
Dimensions(mm) A Width Height Weight(g)
8 Cells 116.5 66 23 200
10 Cells 137.5 66 23 220
12 Cells 158.5 66 23 250
Notes:
1. Dimensions Tolerance ±5%
2. Specifications refer to type F unless otherwise specified.
3. Custom designs available for other special attenuation value & accuracy.
深
VARIABLE/STEP ATTENUATORS
2-37
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model SHX-GKTS-FS1/1 DC-5GHz 1 Watts
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
Model Number
Frequency Range(GHz)
AttenuationRange(dB)
Attenuation Accuracy(dB)
VSWRInsertion Loss(dB)
RF Input Power(dBm)
SwitchSpeed
RemoteControl
SHX-GKTS-FS1/1-127-0.8/3-NK 0.8-3 127/1
±0.5(1-9) ±1(10-31)
±1.5(32-63) ±2.5%(>63)
1.5 ≤5 33 6ms / SHX-GKTS-FS1/1-127-0.8/3-NK-E 0.8-3 127/1 1.5 ≤5 33 6ms Ethernet
SHX-GKTS-FS1/1-127-3-NK DC-3 127/1 1.5 ≤6 33 6ms / SHX-GKTS-FS1/1-127-3-NK-E DC-3 127/1 1.5 ≤6 33 6ms Ethernet
SHX-GKTS-FS1/1-91-5-NK DC-5 91/1 1.6 ≤6 33 6ms / SHX-GKTS-FS1/1-91-5-NK-E DC-5 91/1 1.6 ≤6 33 6ms Ethernet
SHX-GKTS-HFS1/1-110-0.8/3-NK 0.8-3 110/1 1.5 ≤10 30 2μs / SHX-GKTS-HFS1/1-110-0.8/3-NK-E 0.8-3 110/1 1.5 ≤10 30 2μs Ethernet
Note: Frequency range highest can be 18GHz
NOMINAL IMPEDANCE:50Ω
AC SUPPLY:100-240 VAC @ 47-63 Hz
CONNECTOR TYPE:N(K)
Notes:
1. Dimensions Tolerance ±5%
2. Dimensions and specifications refer to connector type N unless otherwise specified.
3. Custom designs available for other special attenuation value & accuracy.
MECHANICAL SPECIFICATIONS Connectors Brass Nickel Plated Female Pin Beryllium Copper Gold PlatedHousing Aluminum, Gray Powder CoatTemp Range 0°C~+50°C Dimensions 152×130×90 mm Weight 1Kg
SHX-GKTS-FS1/1 variable or step attenuators is programmable attenuator consisting of an single-port input /single-port output test platform, the frequency range DC- 5GHz, attenuation range of 0-127dB . Through the LCD to reflect the dynamic and static attenuation values, Use the knob to adjust the attenuation values and press to confirm attenuation setting success.
Used to simulate the mobile phone base station signals received from the attenuation, as well as handoff when the signal continuity, mainly used for wireless communication systems signal test, with small size, high precision, stable and reliable.
VARIABLE/STEP ATTENUATORS
2-38
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model SHX-GKTS-FS2/2 DC-5GHz 1 Watts
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
NOMINAL IMPEDANCE: 50Ω
AC SUPPLY:100-240 VAC @ 47-63 Hz
CONNECTOR TYPE: N(F)
Notes:
1. Dimensions Tolerance ±5%
2. Dimensions and specifications refer to connector type N unless otherwise specified.
3. Custom designs available for other special attenuation value & accuracy.
MECHANICAL SPECIFICATIONS
Connectors Brass Nickel Plated
Female Pin Beryllium Copper Gold Plated
Housing Aluminum, Gray Powder Coat
Temp Range 0°C~+50°C
Dimensions 217×200×95 mm
Weight 2Kg
Model Number Frequency
Range(GHz) AttenuationRange/Step
Attenuation Accuracy(dB)
VSWRInsertion Loss(dB)
Average Power(dBm)
SwitchSpeed
RemoteControl
SHX-GKTS-FS2/2-127-0.8/3-NK 0.8-3 127/1
±0.5(1-9) ±1(10-31)
±1.5(32-63)±2.5%(>
63)
≤1.5 ≤5 33 6ms /
SHX-GKTS-FS2/2-127-0.8/3-NK-E 0.8-3 127/1 ≤1.5 ≤5 33 6ms Ethernet
SHX-GKTS-FS2/2-127-3-NK DC-3 127/1 ≤1.5 ≤6 33 6ms /
SHX-GKTS-FS2/2-127-3-NK-E DC-3 127/1 ≤1.5 ≤6 33 6ms Ethernet
SHX-GKTS-FS2/2-91-5-NK DC-5 91/1 ≤1.6 ≤6 33 6ms /
SHX-GKTS-FS2/2-91-5-NK-E DC-5 91/1 ≤1.6 ≤6 33 6ms Ethernet
SHX-GKTS-HFS2/2-110-0.8/3-NK 0.8-3 110/1 ≤1.5 ≤10 30 2μs /
SHX-GKTS-HFS2/2-110-0.8/3-NK-E 0.8-3 110/1 ≤1.5 ≤10 30 2μs Ethernet
SHX-GKTS-HFS2/2-93-0.8/6-NK 0.8-6 93/1 ≤1.9 ≤13 30 2μs /
SHX-GKTS-HFS2/2-93-0.8/6-NK-E 0.8-6 93/1 ≤1.9 ≤13 30 2μs Ethernet
SHX-GKTS-HFS2/2-63-0.8/3.5-NK-E 0.8-3.5 63/1 ±0.5(1-9)
±1(10-31) ±1.5(32-63)
≤1.5 ≤10.0 30 2μs Ethernet
SHX-GKTS-HFS2/2-103-2.0/6.0-NK-E 2.0-6.0 10/1 ±0.4dB or 3% ≤1.6 ≤5.5 30 2μs Ethernet
SHX-GKTS-FS2/2 variable or step attenuators is programmable attenuator consisting of an double-port input /double-port output test platform, the frequency range DC-6GHz, attenuation range of 0-127dB . Through the LCD to reflect the dynamic and static attenuation values, Use the knob to adjust the attenuation values and press to confirm attenuation setting success. Used to simulate the mobile phone base station signals received from the attenuation, as well as handoff when the signal continuity, mainly used for wireless communication systems signal test, with small size, high precision, stable and reliable.
PROGRAMMABLE ATTENUATORS
2-39
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Programmable attenuators are generally used to control power level of microwave signals by volts control or computer programmable auto control manner. They are small with high accuracy and high stability etc.
GKTS-G serial programmable attenuators' average power 2W, frequency range from DC-5GHz, attenuation value 0-91dB by 1/10dB step. MCU-drive circuit could be designed to control programmable attenuator according to Customer’s demand.
Model GKTS-G DC-5GHz 2 Watts
4 Cells
8 Cells
MECHANICAL SPECIFICATIONS
Connectors Female Pin Housing Temp Range Dimensions Weight
Brass Nickel Plated
Beryllium Copper Gold Plated
Aluminum, Nickel
-20°C~+85°C4 Cells: 91.6×28×20.5mm 8 Cells: 116.5×34×20.5mm
4 Cells: 80g 8 Cells: 135g
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
Model Number
Cells Frequency
Range(GHz) AttenuationRange(dB)
AttenuationStep(dB)
Max VSWR
InsertionLoss(dB)
Attenuation Accuracy(dB)
≤10 16/20
GKTS2-4-15-1-G
4
DC-1 0-15dB in1dB steps
1,2,4,8
1.30 ≤2.5 ±0.3 /
GKTS2-4-15-3-G DC-3 1.45 ≤3.0 ±0.5 /
GKTS2-4-15-5-G DC-5 1.50 ≤4.0 ±0.6 /
GKTS2-4-70-1-G
4
DC-1 0-70dB in
10dB steps10,20,20,20
1.30 ≤2.5 ±0.3 ±0.4
GKTS2-4-70-3-G DC-3 1.45 ≤3.0 ±0.5 ±0.5
GKTS2-4-70-5-G DC-5 1.50 ≤4.0 ±0.6 ±0.6
GKTS2-8-91-1-G
8
DC-1
0-91dB in1dB steps
1,2,4,8,16,20,20,20
1.30 ≤2.5 ±0.3 ±0.4
GKTS2-8-91-3-G DC-3 1.45 ≤4.5 ±0.5 ±0.5
GKTS2-8-91-4-G DC-4 1.55 ≤5.5 ±0.6 ±0.6
GKTS2-8-91-5-G DC-5 1.60 ≤6.0 ±0.8 ±1.2
NOMINAL IMPEDANCE: 50Ω AVERAGE POWER: 2W SWITCH TIME: 6ms OPERATING VOLTAGE: +12V OPERATING CURRENT: 30mA/Cell CONNECTOR TYPE: SMA (F,F) Notes: 1. Dimensions Tolerance ±2% 2. Custom designs available for other special attenuation value & accuracy
PROGRAMMABLE SOLID STATE ATTENUATORS
2-40
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model GKTS-H 0.2-6.0GHz RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS Model
Number Frequency
Range(GHz) AttenuationValue(dB)
Attenuation Step(dB)
VSWRInsertion Loss(dB)
Attenuation Accuracy(dB)
Dimensions
GKTS1-5-31-6-HD 0.2-6.0 31/1 1,2,4,8,16 ≤1.8 ≤5.5
±(0.1+5%) ≤0.8GHz
±(0.3+3%) >0.8GHz
B GKTS1-6-31.5-6-HD 0.2-6.0 31.5/0.5 0.5,1,2,4,8,16 ≤1.8 ≤5.5 B GKTS1-6-63-6-HD 0.2-6.0 63/1 1,2,4,8,16,32 ≤1.8 ≤9.5 B
GKTS1-7-63.5-6-HD 0.2-6.0 63.5/0.5 0.5,1,2,4,8,16,32 ≤1.8 ≤9.5 B GKTS1-7-95-6-HD 0.4-6.0 95/1 1,2,4,8,16,32,32 ≤1.8 ≤11.0 A
GKTS1-8-95.5-6-HD 0.4-6.0 95.5/0.5 0.5,1,2,4,8,16,32,32 ≤1.8 ≤11.0 A GKTS0.5-4-45-2/6-H 2.0-6.0 45/3 3,6,12,24 ≤2.0 ≤8.0 C GKTS1-8-110-6-HD 0.4-6.0 110/0.5 0.5,1,2,4,8,16,32,63 ≤1.8 ≤13.0 A
Model
Number Frequency
Range(GHz) AttenuationValue(dB)
Attenuation Step(dB)
VSWRInsertion Loss(dB)
Attenuation Accuracy(dB)
Dimensions
GKTS1-5-31-3-HD 0.2-3.0 31/1 1,2,4,8,16 ≤1.4 ≤3.0
±(0.1+5%) ≤0.8GHz
±(0.3+3%) >0.8GHz
B GKTS1-6-31.5-3-HD 0.2-3.0 31.5/0.5 0.5,1,2,4,8,16 ≤1.4 ≤3.0 B GKTS1-6-63-3-HD 0.2-3.0 63/1 1,2,4,8,16,32 ≤1.4 ≤5.0 B
GKTS1-7-63.5-3-HD 0.2-3.0 63.5/0.5 0.5,1,2,4,8,16,32 ≤1.4 ≤5.0 B GKTS0.2-8-63.75-3-HD 0.2-3.0 63.75/0.25 0.25,0.5,1,2,4,8,16,31 ≤1.6 ≤6.0 B
GKTS1-7-95-3-HD 0.4-3.0 95/1 1,2,4,8,16,32,32 ≤1.5 ≤7.5 A GKTS1-8-95.5-3-HD 0.4-3.0 95.5/0.5 0.5,1,2,4,8,16,32,32 ≤1.5 ≤7.5 A GKTS1-7-110-3-HD 0.4-3.0 110/1 1,2,4,8,16,32,63 ≤1.5 ≤9.5 A GKTS1-8-110-3-HD 0.4-3.0 110/0.5 0.5,1,2,4,8,16,32,63 ≤1.5 ≤9.5 A
Notes: XX refer to control manner: 1、H for +5V; 2、HD for TTL.
Impedance: 50Ω
Switch Time: 2us
Input Power: 30dBm
Note:
1. Dimensions Tolerance±2%
2. Dimensions and specifications refer to connector type SMA unless otherwise specified
MECHANICAL SPECIFICATIONS Connectors Brass Gold Or Nickel Plated
Female Pin Beryllium Copper Gold Plated
Housing Aluminum, Anodic Oxidation
Temp Range -55° C ~ +125° C
Programmable attenuator control microwave power by TTL & programmable usually, include input power of control signal measuring system, output power of signal system, use in communication or ATE mostly with high accuracy and stability etc.
GKTS-H serial programmable attenuators' average power is 1W, frequency range from 0.2-6GHz, attenuation value 0-110dB by 0.25, 0.5, 1dB step. TTL-drive circuit could be designed to control programmable attenuator according to Customer’s demand.
PROGRAMMABLE SOLID STATE ATTENUATORS
2-41
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Dimensions:
(A) (B) (C)
Solid State Programmable Attenuator Control Method:
Note:When need corresponded attenuation value, corresponded point input low, others input high.
Operation Voltage
Vdd +3 to +5 V
Controlled Voltage
Low 0 to +0.8 V
High +3 to +5 V
PIN 1 2 3 4 5 6 7 8 9 10 GKTS1-5-31-3-HD NO 1dB 2dB 4dB 8dB 16dB NO NO Vdd GNDGKTS1-5-31-6-HD NO 1dB 2dB 4dB 8dB 16dB NO NO Vdd GND
GKTS1-6-31.5-3-HD 0.5dB 1dB 2dB 4dB 8dB 16dB NO NO Vdd GNDGKTS1-6-31.5-6-HD 0.5dB 1dB 2dB 4dB 8dB 16dB NO NO Vdd GNDGKTS1-6-63-3-HD NO 1dB 2dB 4dB 8dB 16dB 32dB NO Vdd GNDGKTS1-6-63-6-HD NO 1dB 2dB 4dB 8dB 16dB 32dB NO Vdd GND
GKTS1-7-63.5-3-HD 0.5dB 1dB 2dB 4dB 8dB 16dB 32dB NO Vdd GNDGKTS1-7-63.5-6-HD 0.5dB 1dB 2dB 4dB 8dB 16dB 32dB NO Vdd GND
GKTS0.2-8-63.75-3-HD 0.25dB 0.5dB 1dB 2dB 4dB 8dB 16dB 31dB Vdd GNDGKTS1-7-95-3-HD NO 1dB 2dB 4dB 8dB 16dB 32dB 32dB Vdd GNDGKTS1-7-95-6-HD NO 1dB 2dB 4dB 8dB 16dB 32dB 32dB Vdd GND
GKTS1-8-95.5-3-HD 0.5dB 1dB 2dB 4dB 8dB 16dB 32dB 32dB Vdd VddGKTS1-8-95.5-6-HD 0.5dB 1dB 2dB 4dB 8dB 16dB 32dB 32dB Vdd GNDGKTS1-7-110-3-HD NO 1dB 2dB 4dB 8dB 16dB 32dB 32dB Vdd GNDGKTS1-8-110-3-HD 0.5dB 1dB 2dB 4dB 8dB 16dB 32dB 32dB Vdd GNDGKTS0.5-4-45-2/6-H GND Vdd 3dB 6dB 12dB 24dB / / / /
100W PROGRAMMABLE ATTENUATOR
2-42
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 05-30-16
Model SHX-GKTS100-31-NK 100W Programmable Attenuator
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
NOMINAL IMPEDANCE:50Ω CONNECTOR TYPE:N SWITCHING MODE:cold switching
SCHEMATIC DIAGRAM
Notes: 1. Dimensions Tolerance ±3%
MECHANICAL SPECIFICATIONS Crate Shell Aluminium
Connector Housing Brass Nickel Plated
Female Pin Beryllium Copper Gold Plated
Temp Range 0°C~+50°C
Dimensions 483×133×450mm
Weight 10KG
Model Number Frequency
Range(GHz) InsertionLoss(dB)
VSWRMax PowerHandling
AttenuationRange(dB)
AttenuationAccuracy 1-15dB
AttenuationAccuracy 16-31dB
ControlMode
SHX-GKTS100-31-NK 0.05-3 ≤2.5 <1.65 100W 31dB in
1dB step±2.0 dB ±3.0dB
LocalRemote
SHX-GKTS100-31-NK high power variable program- able attenuator’s attenuation range is 31dB in 1dB step, affordable power 100W. Control mode for the local and remote. Suitable for all kinds of high power signal attenuation environment and application.
VARIABLE/STEP ATTENUATORS
2-43
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 08-30-16
Model GKTSX-2-XX-18-A7-B DC-18GHz 2,10 Watts
2W
10W
MECHANICAL SPECIFICATIONS
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
NOMINAL IMPEDANCE: 50Ω AVERAGE POWER: 2W,10W PEAK POWER: 200W (5μs pulse width with 0.5% duty cycle) CONNECTOR TYPE: N(M,F), SMA(F,F), 3.5mm(F,F,)
Notes: 1. Dimensions Tolerance ±5% 2. Custom designs available for other special attenuation value & accuracy
Connectors Male Pin Female Pin Housing Temp Range Dimensions Weight
Brass Nickel Plated
Brass Gold Plated
Beryllium Copper Gold Plated
Aluminum Anodic Oxidation
0°C~+54°C2W:115×106×83mm
10W:126×106×83mm 985~1039g
1021g~1075g
Model Number
Frequency Range(GHz)
AttenuationStep Size
Max VSWR
InsertionLoss(dB)
Attenuation Accuracy(dB)
GKTS2-2-69-8-A7-B DC-8 0-69dB in1dB steps
1.5 ≤1.25 ±0.5dB(0~9dB) ±1.0dB(0~19dB) ±1.5dB(20~49dB) ±2.0dB(50~69dB)
GKTS2-2-69-12.4-A7-B DC-12.4 1.5 ≤1.5
GKTS2-2-69-18-A7-B DC-18 1.75 ≤1.5
GKTS2-2-99-8-A7-B DC-8
0-99dB in1dB steps
1.5 ≤1.25 ±0.5dB(0~9dB) ±1.0dB(0~19dB) ±1.5dB(20~49dB) ±2.0dB(50~69dB)
±2.5dBor3.5%(70~99dB)
GKTS2-2-99-12.4-A7-B DC-12.4 1.5 ≤1.5
GKTS2-2-99-18-A7-B DC-18 1.75 ≤1.5
GKTS10-2-69-8-A7-B DC-8 0-69dB in1dB steps
1.5 ≤1.25 ±0.5dB(0~9dB) ±1.0dB(0~19dB) ±1.5dB(20~49dB) ±2.0dB(50~69dB)
GKTS10-2-69-12.4-A7-B DC-12.4 1.6 ≤1.5
GKTS10-2-69-18-A7-B DC-18 1.75 ≤1.75
GKTS10-2-99-8-A7-B DC-8
0-99dB in1dB steps
1.5 ≤1.25 ±0.5dB(0~9dB) ±1.0dB(0~19dB) ±1.5dB(20~49dB) ±2.0dB(50~69dB)
±2.5dBor3.5%(70~99dB)
GKTS10-2-99-12.4-A7-B DC-12.4 1.6 ≤1.5
GKTS10-2-99-18-A7-B DC-18 1.75 ≤1.75
Rotary Step attenuators are used to adjust the power signal level by step within certain frequency range, they can also be used to adjust the test system's power level as inset attenuators, it is small with high accuracy and high stability etc.
GKTSX-2-XX-18-A7-B type rotary step attenuators' average power 2W,10W, frequency range from DC-18GHz, attenuation value 0-99dB by 1dB step.
VARIABLE/STEP ATTENUATORS
2-44
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 03-03-17
Model GKTSX-1-XX-28-A8-B DC-28GHz 2,10, 25 Watts
2W:60-90dB 2W:1-9dB
10W:1-90dB 25W:70dB
MECHANICAL SPECIFICATIONS
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
NOMINAL IMPEDANCE: 50Ω AVERAGE POWER: 2W,10W,25W PEAK POWER: 200W (5μs pulse width with 0.5% duty cycle) CONNECTOR TYPE: 3.5mm(F,F), SMA(F,F)(DC-18GHz)
Notes: 1. Dimensions Tolerance ±5% 2. Custom designs available for other special attenuation value & accuracy
Connectors Male Pin Female Pin Housing Temp Range Dimensions Weight
Brass Nickel Plated
Brass GoldPlated
Beryllium CopperGold Plated
Aluminum Anodic Oxidation
0°C~+54°C62×106×83mm 525g
66×106×83mm 520g
Model Number
Frequency Range(GHz)
AttenuationStep Size
Max VSWR
InsertionLoss(dB)
Attenuation Accuracy(dB)
GKTS2-1-9-18-A8-B DC-18 0-9dB in 1dB steps
1.6 ≤1.0 ±0.5dB GKTS2-1-9-26.5-A8-B DC-26.5 1.7 ≤1.8 ±1.0dB
GKTS2-1-70-18-A8-B DC-18 0-70dB in
10dB steps1.6 ≤1.0 ±1.5dB or 4%
GKTS2-1-60-26.5-A8-B DC-26.5 0-60dB in
10dB steps1.75 ≤1.8 ±1.5dB or 4%
GKTS2-1-90-8-A8-B DC-8 0-90dB in
10dB steps1.6 ≤1.0 ±1.5dB or 4% GKTS2-1-90-12.4-A8-B DC-12.4
GKTS2-1-90-18-A8-B DC-18 GKTS10-1-9-18-A8-B DC-18
0-9dB in 1dB steps
1.6 ≤1.0 ±0.5dB GKTS10-1-9-26.5-A8-B DC-26.5 1.7 ≤1.8 ±1.0dB GKTS10-1-9-26.5-A8-B DC-28 1.75 ≤1.8 ±1.5dB
GKTS10-1-70-18-A8-B DC-18 0-70dB in
10dB steps1.6 ≤1.0 ±1.5dB or 4%
GKTS10-1-60-26.5-A8-B DC-26.5 0-60dB in
10dB steps1.75 ≤1.8 ±1.5dB or 4%
GKTS10-1-90-8-A8-B DC-8 0-90dB in
10dB steps1.6 ≤1.0 ±1.5dB or 4% GKTS10-1-90-12.4-A8-B DC-12.4
GKTS10-1-90-18-A8-B DC-18 GKTS25-1-70-18-A8-B DC-18
0-70dB in10dB steps
1.6 ≤1.0 ±1.5dB or 4%
GKTS25-1-70-26.5-A8-B DC-26.5 1.75 ≤1.8 GKTS25-1-70-28-A8-B DC-28 1.75 ≤1.8 ±2dB or 5%
Rotary Step attenuators are used to adjust the power signal level by step within certain frequency range, they can also be used to adjust the test system's power level as inset attenuators, it is small with high accuracy and high stability etc.
GKTSX-1-XX-28-A8-B type rotary step attenuators' average power 2W,10W,25W frequency range from DC-28GHz, attenuation value 0-90dB by 1dB/10dB step.
VARIABLE/STEP ATTENUATORS
2-45
3F,13 Building,No.99,Tianzhou Rd, Shanghai, China (PC:200233) Tel:86-21-54451395, 54451396
Fax:86-21-64958230 Web:www.shx-sh.com Email:[email protected]
Revision Date: 04-11-17
Model GKTS2-18-E 2GHz-18GHz 2 Watts
4G
8G/18G
MECHANICAL SPECIFICATIONS
RoHS Complient: Yes
ELECTRICAL SPECIFICATIONS
NOMINAL IMPEDANCE: 50Ω
AVERAGE POWER: 2W
CONNECTOR TYPE: N (F, F)
Notes:
1. Dimensions Tolerance ±5%
2. Custom designs available for other special attenuation value & accuracy
Connectors Female Pin Housing Temp Range Dimensions Weight
Brass Nickel
Plated
Beryllium Copper
Gold Plated
Aluminum, Sand Blast ,
Spray Painting -40°C~+65°C
4G:186×170×19mm
8G/18G:186×170×21mm 590g
Model
Number
Frequency
Range(GHz)
Attenuation
Range(dB)
Max
VSWR
GKTS2-4-E 0.5-4 ≥20(>1GHz)
≤1.50 15-16 (0.5-1GHz)
GKTS2-6-E 2-6 ≥20
GKTS2-18-E 2-18 ≥20
Continuous variable attenuators can be used to adjust the power signal level continuously within certain frequency range without power off, they can also be used to adjust the test system's power level as inset attenuators, it is small with high accuracy and high stability etc.
GKTS2-18-E continuous variable attenuators' average power 2W, frequency range from 2-18GHz.