VDA „Collaborative Managed Inventory (CMI) and Vendor Managed Inventory (VMI) in the aftermarket“
9001
Data Structure T2
This recommendation describes a standardised CMI/VMI process in which customer inventories are managed jointly by customers and suppliers. The document includes a recommendation for electronic data interchange (EDI) of the data required in the CMI/VMI process, as well as the process description. This recommendation has been issued by the VDA Project Group „Interchange of master data and movement data in the aftermarket‟.
Version 1.0, February 2010
Transparency of Master and Variable Data in the Aftermarket Project Group
Herausgeber: Verband der Automobilindustrie Copyright
Behrenstraße 35 This document may not be printed or 10117 Berlin otherwise reproduced without reference
Telefon 030/897842-0 to the source. Telefax 030/897842-0
Internet: www.vda.de
VDA-Recommendation 9001 Version 1.0, February 2010 Page 2 of 45
Copyright: VDA
Disclaimer VDA recommendations are freely available for general use. The user is responsible for ensuring correct application for the specific case. They represent the latest technology available at the time of issue. Application of VDA recommendations does not relieve the user from responsibility for his own actions. In this regard, all users act at their own risk. VDA and those involved with VDA recommendations do not accept any liability. Anyone applying VDA recommendations who identifies inaccuracies or possible incorrect interpretations is invited to inform VDA immediately and any errors can thus be rectified.
VDA-Recommendation 9001 Version 1.0, February 2010 Page 3 of 45
Copyright: VDA
Table of Contents
STRUCTURE..................................................................................................................................4
BRANCHING DIAGRAM ................................................................................................................6
SEGMENT DETAILS ....................................................................................................................12
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 4 of 45
Structure / Table of Contents
Counter = Counter of segment/group within the standard St = Status No = Consecutive segment number EDIFACT: M=Mandatory, C=Conditional MaxOcc = Maximum occurrence of the segment/group User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Content
0000 1 UNA C 1 0 SERVICE STRING ADVICE
0000 2 UNB M 1 0 INTERCHANGE HEADER
0010 3 UNH M 1 0 Message Header
0020 4 BGM M 1 0 Beginning of message
0030 5 DTM M 1 1 Stock Report Date/Time
0070 SG2 R 1 1 Inventory Controller (Supplier)
0080 6 NAD M 1 1 Supplier's Name and Address
0130 SG4 O 1 2 Information Contact
0140 7 CTA M 1 2 Contact information
0150 8 COM O 1 3 Telephone
0150 9 COM O 1 3 Email
0070 SG2 R 1 1 Warehouse Keeper (Customer)
0080 10 NAD M 1 1 Customer's Name and Address
0090 11 LOC O 1 2 Place of Discharge
0130 SG4 O 1 2 Information Contact
0140 12 CTA M 1 2 Contact information
0150 13 COM O 1 3 Telephone
0150 14 COM O 1 3 Email
0280 SG9 R 9999 1 Article
0290 15 LIN M 1 1 Line item
0300 16 PIA O 1 2 Additional Product ID
0310 17 IMD O 1 2 Article Description
0320 18 MEA O 1 2 Forecast Accuracy
0330 19 ALI O 1 2 Disposition Method
0350 20 DTM O 1 2 Engineering Change Date
0350 21 DTM O 2 2 Tolerance Limits
0360 SG10 D 1 2 Order Number (purchase)
0370 22 RFF M 1 2 Reference
0380 23 DTM O 1 3 Document Date
0390 SG11 D 5 2 Stock Balance
0400 24 QTY M 1 2 Stock Balance Quantity
0410 25 INV R 1 3 Details regarding inventory management
0440 26 DTM R 1 3 Stock Balance Date/Time
0530 SG14 D 5 3 Document Number / last 3 delivery notes
0540 27 RFF M 1 3 Delivery Note Number
0550 28 DTM O 1 4 Delivery Note Date
0390 SG11 D 1 2 Usage Quantity In Period
0400 29 QTY M 1 2 Used Quantity
0440 30 DTM O 1 3 Reference Period Of Usage
0390 SG11 O 1 2 Backorder Quantity
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 5 of 45
Counter = Counter of segment/group within the standard St = Status No = Consecutive segment number EDIFACT: M=Mandatory, C=Conditional MaxOcc = Maximum occurrence of the segment/group User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Content
0400 31 QTY M 1 2 Quantity
0390 SG11 O 2 2 Minimum and Maximum Stock Quantity
0400 32 QTY M 1 2 Minimum / Maximum Stock Quantity
0670 33 UNT M 1 0 MESSAGE TRAILER
0000 34 UNZ M 1 0 INTERCHANGE TRAILER
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 6 of 45
Branching Diagram of Used Segments/Groups
Segments and segment groups with white background are used. Segments and segment groups with gray background are not used, but available in the message type.
Tag Tag = Segment/Group Tag
St MaxOcc St = Status (M=Mandatory, C=Conditional, R=Required, O=Optional, A=Advised, D=Dependent) MaxOcc = Maximum occurrence of the segment/group
Copyright: VDA Generated by GEFEG.FX
Level 0
Level 1
Level 2
Level 3
UNA C 1
UNB M 1
UNH M 1
BGM M 1
DTM M 1
SG1 C 10
RFF
M 1
DTM C 1
SG2 R 1
NAD
M 1
LOC O 1
SG3 C 10
RFF
M 1
DTM C 1
SG4 O 1
CTA
M 1
COM O 1
1
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 7 of 45
Branching Diagram of Used Segments/Groups
Segments and segment groups with white background are used. Segments and segment groups with gray background are not used, but available in the message type.
Tag Tag = Segment/Group Tag
St MaxOcc St = Status (M=Mandatory, C=Conditional, R=Required, O=Optional, A=Advised, D=Dependent) MaxOcc = Maximum occurrence of the segment/group
Copyright: VDA Generated by GEFEG.FX
Level 0
Level 1
Level 2
Level 3
Level 4
1
SG5 C 5
CUX
M 1
DTM C 1
SG6 C 9999
CPS
M 1
SG7 C 999
PAC
M 1
PCI C 1000
SG8 C 9999
QTY
M 1
GIN C 9999
DTM C 5
SG9 R 9999
LIN
M 1
PIA O 1
IMD O 1
MEA O 1
ALI O 1
LOC C 5
3
2
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 8 of 45
Branching Diagram of Used Segments/Groups
Segments and segment groups with white background are used. Segments and segment groups with gray background are not used, but available in the message type.
Tag Tag = Segment/Group Tag
St MaxOcc St = Status (M=Mandatory, C=Conditional, R=Required, O=Optional, A=Advised, D=Dependent) MaxOcc = Maximum occurrence of the segment/group
Copyright: VDA Generated by GEFEG.FX
Level 2
Level 3
Level 4
2
DTM O 1
SG10 D 1
RFF
M 1
DTM O 1
SG11 D 5
QTY
M 1
INV R 1
GIN C 9999
LOC C 5
DTM R 1
STS C 9
SG12 C 5
NAD
M 1
LOC C 1
SG13 C 5
PRI
M 1
CUX C 1
5
4
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 9 of 45
Branching Diagram of Used Segments/Groups
Segments and segment groups with white background are used. Segments and segment groups with gray background are not used, but available in the message type.
Tag Tag = Segment/Group Tag
St MaxOcc St = Status (M=Mandatory, C=Conditional, R=Required, O=Optional, A=Advised, D=Dependent) MaxOcc = Maximum occurrence of the segment/group
Copyright: VDA Generated by GEFEG.FX
Level 4
4
DTM C 1
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 10 of 45
Branching Diagram of Used Segments/Groups
Segments and segment groups with white background are used. Segments and segment groups with gray background are not used, but available in the message type.
Tag Tag = Segment/Group Tag
St MaxOcc St = Status (M=Mandatory, C=Conditional, R=Required, O=Optional, A=Advised, D=Dependent) MaxOcc = Maximum occurrence of the segment/group
Copyright: VDA Generated by GEFEG.FX
Level 3
Level 4
Level 5
Level 6
5 SG14 D 5
RFF
M 1
DTM O 1
SG15 C 9999
CPS
M 1
SG16 C 9999
PAC
M 1
MEA C 10
QTY C 10
SG17 C 9999
PCI
M 1
RFF C 1
DTM C 5
GIN C 9999
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 11 of 45
Branching Diagram of Used Segments/Groups
Segments and segment groups with white background are used. Segments and segment groups with gray background are not used, but available in the message type.
Tag Tag = Segment/Group Tag
St MaxOcc St = Status (M=Mandatory, C=Conditional, R=Required, O=Optional, A=Advised, D=Dependent) MaxOcc = Maximum occurrence of the segment/group
Copyright: VDA Generated by GEFEG.FX
Level 0
3
UNT M 1
UNZ M 1
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 12 of 45
Segments
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0000 1 UNA C 1 0 SERVICE STRING ADVICE
Standard Implementation
Tag Name St Format St Format Usage / Remark
UNA
UNA1 Component data element separator
M an1 M an1
UNA2 Data element separator M an1 M an1
UNA3 Decimal notation M an1 M an1
UNA4 Release indicator M an1 M an1
UNA5 Reserved for future use M an1 M an1
UNA6 Segment terminator M an1 M an1
Remark:
Example: UNA:+.? '
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 13 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0000 2 UNB M 1 0 INTERCHANGE HEADER
Standard Implementation
Tag Name St Format St Format Usage / Remark
UNB
S001 SYNTAX IDENTIFIER M M
0001 Syntax identifier M a4 M a4
UNOA UN/ECE level A UNOB UN/ECE level B UNOC UN/ECE level C
0002 Syntax version number M n1 M n1
S002 INTERCHANGE SENDER M M
0004 Sender identification M an..35 M an..35
0007 Partner identification code qualifier
C an..4 O an..4
0008 Address for reverse routing C an..14 O an..14
S003 INTERCHANGE RECIPIENT M M
0010 Recipient identification M an..35 M an..35
0007 Partner identification code qualifier
C an..4 O an..4
0014 Routing address C an..14 O an..14
S004 DATE/TIME OF PREPARATION
M M
0017 Date of preparation M n6 M n6
0019 Time of preparation M n4 M n4
0020 Interchange control reference M an..14 M an..14
S005 RECIPIENT'S REFERENCE PASSWORD
C O
0022 Recipient's reference/password M an..14 M an..14
0025 Recipient's reference/password qualifier
C an2 O an2
0026 Application reference C an..14 O an..14
0029 Processing priority code C a1 O a1
0031 Acknowledgement request C n1 O n1
0032 Communications agreement ID C an..35 O an..35
0035 Test indicator C n1 O n1
1 Interchange is a test
Remark:
Example: UNB+UNOC:3+COM 1+CNG 2+991225:1200+INTERCHANGE 1+0+++++1'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 14 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0010 3 UNH M 1 0 Message Header
Standard Implementation
Tag Name St Format St Format Usage / Remark
UNH
0062 Message reference number M an..14 M an..14 Message reference number
S009 MESSAGE IDENTIFIER M M
0065 Message type identifier M an..6 M an..6
INVRPT Inventory report message
0052 Message type version number M an..3 M an..3
D Draft directory
0054 Message type release number M an..3 M an..3
96A Version 96A
0051 Controlling agency M an..2 M an..2
UN UN/ECE/TRADE/WP.4, United Nations Standard Messages (UNSM)
0057 Association assigned code C an..6 O an..6
A57011 INVRPT/CMIVMI CMI Inventory Report V1R1
0068 Common access reference C an..35 N Not used
S010 STATUS OF THE TRANSFER C N
0070 Sequence message transfer number
M n..2 N Not used
0073 First/last sequence message transfer indication
C a1 N Not used
Remark:
Example: UNH+1+INVRPT:D:96A:UN:A57011'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 15 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0020 4 BGM M 1 0 Beginning of message
Standard Implementation
Tag Name St Format St Format Usage / Remark
BGM
C002 Document/message name C R
1001 Document/message name, coded
C an..3 R an..3 Type Of Stock Report Coded
22 Inventory movement and balance
1131 Code list qualifier C an..3 N Not used
3055 Code list responsible agency, coded
C an..3 R an..3
10 ODETTE
1000 Document/message name C an..35 N Not used
1004 Document/message number C an..35 R an..17 Unique message number
1225 Message function, coded C an..3 N Not used
4343 Response type, coded C an..3 N Not used
Remark:
Example: BGM+22::10'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 16 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0030 5 DTM M 1 1 Stock Report Date/Time
Standard Implementation
Tag Name St Format St Format Usage / Remark
DTM
C507 Date/time/period M M
2005 Date/time/period qualifier M an..3 M an..3
182 Issue date
2380 Date/time/period C an..35 R an..12 Stock Report Date/Time Coded
2379 Date/time/period format qualifier
C an..3 R an..3
203 CCYYMMDDHHMM
Remark:
Example: DTM+182:201004091400:203'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 17 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0070 SG2 R 1 1 Inventory Controller (Supplier)
0080 6 NAD M 1 1 Supplier's Name and Address
Standard Implementation
Tag Name St Format St Format Usage / Remark
NAD
3035 Party qualifier M an..3 M an..3
GM Inventory controller
C082 Party identification details C R
3039 Party id. identification M an..35 M an..20 Stock Controller's Identification Number
1131 Code list qualifier C an..3 N Not used
3055 Code list responsible agency, coded
C an..3 R an..3
91 Assigned by seller or seller's agent 92 Assigned by buyer or buyer's agent
C058 Name and address C N
3124 Name and address line M an..35 N Not used
3124 Name and address line C an..35 N Not used
3124 Name and address line C an..35 N Not used
3124 Name and address line C an..35 N Not used
3124 Name and address line C an..35 N Not used
C080 Party name C O
3036 Party name M an..35 M an..35 Stock Controller's Name
3036 Party name C an..35 O an..35 Name, line 2
3036 Party name C an..35 N Not used
3036 Party name C an..35 N Not used
3036 Party name C an..35 N Not used
3045 Party name format, coded C an..3 N Not used
C059 Street C O
3042 Street and number/p.o. box M an..35 M an..35 Street and number or postbox
3042 Street and number/p.o. box C an..35 O an..35 Street and number or postbox
3042 Street and number/p.o. box C an..35 N Not used
3042 Street and number/p.o. box C an..35 N Not used
3164 City name C an..35 O an..35 City
3229 Country sub-entity identification C an..9 N Not used
3251 Postcode identification C an..9 O an..9 Postcode
3207 Country, coded C an..3 O a2 Country Code, ISO-3166 2-alpha code
Remark:
Example: NAD+GM+987654321::92++Warehouse:OE Manufacturer+Street 1:Street 2+Location++12345+D E'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 18 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0070 SG2 R 1 1 Inventory Controller (Supplier)
0130 SG4 O 1 2 Information Contact
0140 7 CTA M 1 2 Contact information
Standard Implementation
Tag Name St Format St Format Usage / Remark
CTA
3139 Contact function, coded C an..3 R an..3
IC Information contact
C056 Department or employee details
C O
3413 Department or employee identification
C an..17 C an..17
3412 Department or employee C an..35 R an..35 Stock Controller's Info. Contact Dept Or Employee
Remark:
Example: CTA+IC'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 19 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0070 SG2 R 1 1 Inventory Controller (Supplier)
0130 SG4 O 1 2 Information Contact
0150 8 COM O 1 3 Telephone
Standard Implementation
Tag Name St Format St Format Usage / Remark
COM
C076 Communication contact M M
3148 Communication number M an..512 M an..100 Stock Controller's Info. Contact Telephone Number
3155 Communication channel qualifier
M an..3 M an..3
TE Telephone
Remark:
Example: COM+:TE'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 20 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0070 SG2 R 1 1 Inventory Controller (Supplier)
0130 SG4 O 1 2 Information Contact
0150 9 COM O 1 3 Email
Standard Implementation
Tag Name St Format St Format Usage / Remark
COM
C076 Communication contact M M
3148 Communication number M an..512 M an..100 Stock Controller's Info. Contact Email
3155 Communication channel qualifier
M an..3 M an..3
EM Electronic mail
Remark:
Example: [email protected]:EM'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 21 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0070 SG2 R 1 1 Warehouse Keeper (Customer)
0080 10 NAD M 1 1 Customer's Name and Address
Standard Implementation
Tag Name St Format St Format Usage / Remark
NAD
3035 Party qualifier M an..3 M an..3
WH Warehouse keeper
C082 Party identification details C R
3039 Party id. identification M an..35 M an..20 Warehouse Manager's Identification Number
1131 Code list qualifier C an..3 N Not used
3055 Code list responsible agency, coded
C an..3 R an..3
91 Assigned by seller or seller's agent 92 Assigned by buyer or buyer's agent
C058 Name and address C N
3124 Name and address line M an..35 N Not used
3124 Name and address line C an..35 N Not used
3124 Name and address line C an..35 N Not used
3124 Name and address line C an..35 N Not used
3124 Name and address line C an..35 N Not used
C080 Party name C O
3036 Party name M an..35 M an..35 Warehouse Manager's Name
3036 Party name C an..35 O an..35
3036 Party name C an..35 N Not used
3036 Party name C an..35 N Not used
3036 Party name C an..35 N Not used
3045 Party name format, coded C an..3 N Not used
C059 Street C O
3042 Street and number/p.o. box M an..35 M an..35 Street and number or postbox
3042 Street and number/p.o. box C an..35 O an..35 Street and number or postbox
3042 Street and number/p.o. box C an..35 N Not used
3042 Street and number/p.o. box C an..35 N Not used
3164 City name C an..35 O an..35 City
3229 Country sub-entity identification C an..9 N Not used
3251 Postcode identification C an..9 O an..9
3207 Country, coded C an..3 O a2 Warehouse Manager's Country Code Country Code, ISO-3166 2-alpha code
Remark: Werksnummer oder Lagernummer
Example: NAD+WH'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 22 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0070 SG2 R 1 1 Warehouse Keeper (Customer)
0090 11 LOC O 1 2 Place of Discharge
Standard Implementation
Tag Name St Format St Format Usage / Remark
LOC
3227 Place/location qualifier M an..3 M an..3
11 Place/port of discharge
C517 Location identification C R
3225 Place/location identification C an..25 R an..25 Place of discharge identification
1131 Code list qualifier C an..3 N Not used
3055 Code list responsible agency, coded
C an..3 O an..3
92 Assigned by buyer or buyer's agent
3224 Place/location C an..70 N Not used
C519 Related location one identification
C N
3223 Related place/location one identification
C an..25 N Not used
1131 Code list qualifier C an..3 N Not used
3055 Code list responsible agency, coded
C an..3 N Not used
3222 Related place/location one C an..70 N Not used
C553 Related location two identification
C N
3233 Related place/location two identification
C an..25 N Not used
1131 Code list qualifier C an..3 N Not used
3055 Code list responsible agency, coded
C an..3 N Not used
3232 Related place/location two C an..70 N Not used
5479 Relation, coded C an..3 N Not used
Remark:
Example: LOC+11+123::92'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 23 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0070 SG2 R 1 1 Warehouse Keeper (Customer)
0130 SG4 O 1 2 Information Contact
0140 12 CTA M 1 2 Contact information
Standard Implementation
Tag Name St Format St Format Usage / Remark
CTA
3139 Contact function, coded C an..3 R an..3
IC Information contact
C056 Department or employee details
C O
3413 Department or employee identification
C an..17 N Not used
3412 Department or employee C an..35 R an..35 Warehouse Manager's Info. Contact Dept Or Employee
Remark:
Example: CTA+IC+:Horst Mueller'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 24 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0070 SG2 R 1 1 Warehouse Keeper (Customer)
0130 SG4 O 1 2 Information Contact
0150 13 COM O 1 3 Telephone
Standard Implementation
Tag Name St Format St Format Usage / Remark
COM
C076 Communication contact M M
3148 Communication number M an..512 M an..100 Warehouse Manager's Info. Contact Telephone Number
3155 Communication channel qualifier
M an..3 M an..3
TE Telephone
Remark:
Example: COM+:TE'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 25 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0070 SG2 R 1 1 Warehouse Keeper (Customer)
0130 SG4 O 1 2 Information Contact
0150 14 COM O 1 3 Email
Standard Implementation
Tag Name St Format St Format Usage / Remark
COM
C076 Communication contact M M
3148 Communication number M an..512 M an..100 Warehouse Manager's Info. Contact Telex Number
3155 Communication channel qualifier
M an..3 M an..3
EM Electronic mail
Remark:
Example: COM+:EM'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 26 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0280 SG9 R 9999 1 Article
0290 15 LIN M 1 1 Line item
Standard Implementation
Tag Name St Format St Format Usage / Remark
LIN
1082 Line item number C n..6 R n..6 Line number
1229 Action request/notification, coded
C an..3 C an..3
C212 Item number identification C D
7140 Item number C an..35 R an..35 Teilenummer des Kunden Article number assigned by customer
7143 Item number type, coded C an..3 R an..3
IN Buyer's item number
1131 Code list qualifier C an..3 N Not used
3055 Code list responsible agency, coded
C an..3 N Not used
C829 Sub-line information C N
5495 Sub-line indicator, coded C an..3 N Not used
1082 Line item number C n..6 N Not used
1222 Configuration level C n..2 N Not used
7083 Configuration, coded C an..3 N Not used
Remark:
Example: LIN+1++ABC1234:IN'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 27 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0280 SG9 R 9999 1 Article
0300 16 PIA O 1 2 Additional Product ID
Standard Implementation
Tag Name St Format St Format Usage / Remark
PIA
4347 Product id. function qualifier M an..3 M an..3
1 Additional identification
C212 Item number identification M M
7140 Item number C an..35 R an..35 Article number assigned by seller
7143 Item number type, coded C an..3 R an..3
SA Supplier's article number
1131 Code list qualifier C an..3 N Not used
3055 Code list responsible agency, coded
C an..3 N Not used
C212 Item number identification C O
7140 Item number C an..35 R an..17 Engineering change number
7143 Item number type, coded C an..3 R an..3
EC Engineering change level
1131 Code list qualifier C an..3 N Not used
3055 Code list responsible agency, coded
C an..3 N Not used
C212 Item number identification C N
7140 Item number C an..35 N Not used
7143 Item number type, coded C an..3 N Not used
1131 Code list qualifier C an..3 N Not used
3055 Code list responsible agency, coded
C an..3 N Not used
C212 Item number identification C N
7140 Item number C an..35 N Not used
7143 Item number type, coded C an..3 N Not used
1131 Code list qualifier C an..3 N Not used
3055 Code list responsible agency, coded
C an..3 N Not used
C212 Item number identification C N
7140 Item number C an..35 N Not used
7143 Item number type, coded C an..3 N Not used
1131 Code list qualifier C an..3 N Not used
3055 Code list responsible agency, coded
C an..3 N Not used
Remark:
Example: PIA+1+DEF-98765:SA+A:EC'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 28 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0280 SG9 R 9999 1 Article
0310 17 IMD O 1 2 Article Description
Standard Implementation
Tag Name St Format St Format Usage / Remark
IMD
7077 Item description type, coded C an..3 C an..3
7081 Item characteristic, coded C an..3 O an..3 Balance out - article is not longer produced
61 New article 67 Balance out article 87 Promotional event
C273 Item description C R
7009 Item description identification C an..17 O an..17 Category: A - high turnover (e.g. 80%) B - medium turnover (15%) C - low turnower (5%) How sporadic: X - regular deliveries Y - fluctuating Z - sporadic
1131 Code list qualifier C an..3 N Not used
3055 Code list responsible agency, coded
C an..3 O an..3
10 ODETTE
7008 Item description C an..35 R an..35 Article Description (Line 1)
7008 Item description C an..35 O an..35 Article Description (Line 2)
3453 Language, coded C an..3 N Not used
7383 Surface/layer indicator, coded C an..3 N Not used
Remark:
Example: IMD++61+AX::10:Item desceription line 1:Item desceription line 2'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 29 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0280 SG9 R 9999 1 Article
0320 18 MEA O 1 2 Forecast Accuracy
Standard Implementation
Tag Name St Format St Format Usage / Remark
MEA
6311 Measurement application qualifier
M an..3 M an..3
ABN Average reading
C502 Measurement details C N
6313 Measurement dimension, coded
C an..3 N Not used
6321 Measurement significance, coded
C an..3 N Not used
6155 Measurement attribute, coded C an..3 N Not used
6154 Measurement attribute C an..70 N Not used
C174 Value/range C R
6411 Measure unit qualifier M an..3 M an..3
P1 percent
6314 Measurement value C n..18 R n..18 Forecast accuracy in percent
6162 Range minimum C n..18 N Not used
6152 Range maximum C n..18 N Not used
6432 Significant digits C n..2 N Not used
7383 Surface/layer indicator, coded C an..3 N Not used
Remark: The forecast accuracy denominates the quality of transmitted delivery schedules/ibstructions.
Example: MEA+ABN++P1:80'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 30 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0280 SG9 R 9999 1 Article
0330 19 ALI O 1 2 Disposition Method
Standard Implementation
Tag Name St Format St Format Usage / Remark
ALI
3239 Country of origin, coded C an..3 O an..3 Country of origin
9213 Type of duty regime, coded C an..3 N Not used
4183 Special conditions, coded C an..3 O an..3 CMI - Collaboratively Managed Inventory (responsibility at customer's side) VMI - Vendor Managed Inventory (responsibility at supplier's side)
4183 Special conditions, coded C an..3 N Not used
4183 Special conditions, coded C an..3 N Not used
4183 Special conditions, coded C an..3 N Not used
4183 Special conditions, coded C an..3 N Not used
Remark:
Example: ALI+DE++CMI'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 31 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0280 SG9 R 9999 1 Article
0350 20 DTM O 1 2 Engineering Change Date
Standard Implementation
Tag Name St Format St Format Usage / Remark
DTM
C507 Date/time/period M M
2005 Date/time/period qualifier M an..3 M an..3
60 Engineering change level date
2380 Date/time/period C an..35 R an..14 Engineering Change Date
2379 Date/time/period format qualifier
C an..3 R an..3
102 CCYYMMDD
Remark:
Example: DTM+60:20100401:102'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 32 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0280 SG9 R 9999 1 Article
0350 21 DTM O 2 2 Tolerance Limits
Standard Implementation
Tag Name St Format St Format Usage / Remark
DTM
C507 Date/time/period M M
2005 Date/time/period qualifier M an..3 M an..3
158 Horizon start date 159 Horizon end date
2380 Date/time/period C an..35 R an..35 Number of tolerance days
2379 Date/time/period format qualifier
C an..3 R an..3
804 Day
Remark: Tolerance limits denominate time horizons. If such a horison is passed the performace will be devaluated.
Example: DTM+158:5:804'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 33 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0280 SG9 R 9999 1 Article
0360 SG10 D 1 2 Order Number (purchase)
0370 22 RFF M 1 2 Reference
Standard Implementation
Tag Name St Format St Format Usage / Remark
RFF
C506 Reference M M
1153 Reference qualifier M an..3 M an..3
ON Order number (purchase)
1154 Reference number C an..35 R an..17 Document Number
1156 Line number C an..6 N Not used
4000 Reference version number C an..35 N Not used
Remark: Order number (purchase contract)
Example: RFF+ON:111222333'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 34 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0280 SG9 R 9999 1 Article
0360 SG10 D 1 2 Order Number (purchase)
0380 23 DTM O 1 3 Document Date
Standard Implementation
Tag Name St Format St Format Usage / Remark
DTM
C507 Date/time/period M M
2005 Date/time/period qualifier M an..3 M an..3
171 Reference date/time
2380 Date/time/period C an..35 R an..14 Document Date/Time
2379 Date/time/period format qualifier
C an..3 R an..3
102 CCYYMMDD
Remark:
Example: DTM+171::102'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 35 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0280 SG9 R 9999 1 Article
0390 SG11 D 5 2 Stock Balance
0400 24 QTY M 1 2 Stock Balance Quantity
Standard Implementation
Tag Name St Format St Format Usage / Remark
QTY
C186 Quantity details M M
6063 Quantity qualifier M an..3 M an..3 Opening/Closing Balance Indicator 157 Opening stock balance quantity
158 Closing stock balance quantity
6060 Quantity M n..15 M n..15 Stock Balance Quantity
6411 Measure unit qualifier C an..3 O an..3 Measure Unit Specifier Of Stock Balance
Remark:
Example: QTY+157:100:C62'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 36 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0280 SG9 R 9999 1 Article
0390 SG11 D 5 2 Stock Balance
0410 25 INV R 1 3 Details regarding inventory management
Standard Implementation
Tag Name St Format St Format Usage / Remark
INV
4501 Inventory movement direction, coded
C an..3 N Not used
7491 Type of inventory affected, coded
C an..3 D an..3 Nature Of Stock
1 Accepted product inventory 2 Damaged product inventory 3 Bonded inventory 4 Reserved inventory
4499 Reason for inventory movement, coded
C an..3 N Not used
4503 Inventory balance method, coded
C an..3 R an..3 Stock Balance Type
1 Book-keeping inventory balance 2 Formal inventory balance 3 Interim inventory balance
C522 Instruction C N
4403 Instruction qualifier M an..3 N Not used
4401 Instruction, coded C an..3 N Not used
1131 Code list qualifier C an..3 N Not used
3055 Code list responsible agency, coded
C an..3 N Not used
4400 Instruction C an..35 N Not used
Remark:
Example: INV++1++1'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 37 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0280 SG9 R 9999 1 Article
0390 SG11 D 5 2 Stock Balance
0440 26 DTM R 1 3 Stock Balance Date/Time
Standard Implementation
Tag Name St Format St Format Usage / Remark
DTM
C507 Date/time/period M M
2005 Date/time/period qualifier M an..3 M an..3
257 Calculation date
2380 Date/time/period C an..35 R an..14 Stock Balance Date/Time
2379 Date/time/period format qualifier
C an..3 R an..3
102 CCYYMMDD 203 CCYYMMDDHHMM
Remark:
Example: DTM+257:201004091300:203'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 38 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0280 SG9 R 9999 1 Article
0390 SG11 D 5 2 Stock Balance
0530 SG14 D 5 3 Document Number / last 3 delivery notes
0540 27 RFF M 1 3 Delivery Note Number
Standard Implementation
Tag Name St Format St Format Usage / Remark
RFF
C506 Reference M M
1153 Reference qualifier M an..3 M an..3
DQ Delivery note number
1154 Reference number C an..35 R an..17 Document Number
1156 Line number C an..6 N Not used
4000 Reference version number C an..35 N Not used
Remark:
Example: RFF+DQ:9'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 39 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0280 SG9 R 9999 1 Article
0390 SG11 D 5 2 Stock Balance
0530 SG14 D 5 3 Document Number / last 3 delivery notes
0550 28 DTM O 1 4 Delivery Note Date
Standard Implementation
Tag Name St Format St Format Usage / Remark
DTM
C507 Date/time/period M M
2005 Date/time/period qualifier M an..3 M an..3
171 Reference date/time
2380 Date/time/period C an..35 R an..14 Document Date/Time
2379 Date/time/period format qualifier
C an..3 R an..3
102 CCYYMMDD 203 CCYYMMDDHHMM
Remark:
Example: DTM+171'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 40 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0280 SG9 R 9999 1 Article
0390 SG11 D 1 2 Usage Quantity In Period
0400 29 QTY M 1 2 Used Quantity
Standard Implementation
Tag Name St Format St Format Usage / Remark
QTY
C186 Quantity details M M
6063 Quantity qualifier M an..3 M an..3
141 Period quantity, measured
6060 Quantity M n..15 M n..15 Usage Quantity (sum)
6411 Measure unit qualifier C an..3 O an..3 Measure Unit
Remark:
Example: QTY+141:10:C62'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 41 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0280 SG9 R 9999 1 Article
0390 SG11 D 1 2 Usage Quantity In Period
0440 30 DTM O 1 3 Reference Period Of Usage
Standard Implementation
Tag Name St Format St Format Usage / Remark
DTM
C507 Date/time/period M M
2005 Date/time/period qualifier M an..3 M an..3
273 Validity period
2380 Date/time/period C an..35 R an..16 Reference period in days or as a period from - to
2379 Date/time/period format qualifier
C an..3 R an..3
718 CCYYMMDD-CCYYMMDD 804 Day
Remark:
Example: DTM+273:1:804'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 42 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0280 SG9 R 9999 1 Article
0390 SG11 O 1 2 Backorder Quantity
0400 31 QTY M 1 2 Quantity
Standard Implementation
Tag Name St Format St Format Usage / Remark
QTY
C186 Quantity details M M
6063 Quantity qualifier M an..3 M an..3
83 Backorder quantity
6060 Quantity M n..15 M n..15 Quantity
6411 Measure unit qualifier C an..3 O an..3 Measure unit
Remark:
Example: QTY+83:0:C62'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 43 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0280 SG9 R 9999 1 Article
0390 SG11 O 2 2 Minimum and Maximum Stock Quantity
0400 32 QTY M 1 2 Minimum / Maximum Stock Quantity
Standard Implementation
Tag Name St Format St Format Usage / Remark
QTY
C186 Quantity details M M
6063 Quantity qualifier M an..3 M an..3
97 Minimum inventory 98 Maximum inventory
6060 Quantity M n..15 M n..15 Quantity
6411 Measure unit qualifier C an..3 O an..3 Day is allowed as qualifier (359=day) ; in this case days of inventory are stated (instead of discreet quantity).
Remark: The supplier is obliged to organise the deliveries in a way that the stock does not decrease beyond minimum stock quantity does not increase beyound maximum stock quantity.
Example: QTY+97:70:C62'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 44 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0670 33 UNT M 1 0 MESSAGE TRAILER
Standard Implementation
Tag Name St Format St Format Usage / Remark
UNT
0074 Number of segments in a message
M n..6 M n..6 Number of segments in the message
0062 Message reference number M an..14 M an..14 Message reference number
Remark:
Example: UNT+31+1'
VDA Recommendation 9001 T2 Version 1.0 , February 2010 Page 45 of 45
No = Consecutive segment number St = Status MaxOcc = Maximum occurrence of the segment/group EDIFACT: M=Mandatory, C=Conditional Counter = Counter of segment/group within the standard User specific: R=Required, O=Optional, D=Dependent,
A=Advised, N=Not used
Copyright: VDA Generated by GEFEG.FX
Counter No Tag St MaxOcc Level Name
0000 34 UNZ M 1 0 INTERCHANGE TRAILER
Standard Implementation
Tag Name St Format St Format Usage / Remark
UNZ
0036 Interchange control count M n..6 M n..6 Interchange control count
0020 Interchange control reference M an..14 M an..14 Interchange control reference
Remark:
Example: UNZ+1+INTERCHANGE 1'