32
Government Forces Law Enforcement Private Security A Revolution in Armory The Dawn of a New Day in Ballistic Protection VEHICLE ARMOR • BUILDING ARMOR • PERSONAL PROTECTION
Government Forces
LawEnforcement
Private Security
A Revolution in Armory
The Dawn of a New Day in Ballistic Protection
VEHICLE ARMOR • BUILDING ARMOR • PERSONAL PROTECTION
2
The Dawn of a New Day in Ballistic Protection
VEHICLE ARMOR • BUILDING ARMOR • PERSONAL PROTECTION
VEHICLE ARMOR• Standard & comprehensive vehicle armor solutions
• Unsurpassed quick installation
• Ballistic resistant glass: UL752 rating levels 1 through level 8
• Thin enough to allow level IIA ballistic window to roll up & down
BUILDING ARMOR• Great for police buildings, government buildings, schools,
federal buildings, security companies, county buildings, warehouses and others
• Ballistic resistant glass: UL752 rating levels 1 through level 8
• Structural armored wall panels
• Armored building doors
• Specialty and custom armor available
PERSONAL PROTECTION• Theworld’smostlightweight,flexibleand
highly-effective ballistic protection
• Protective gear for law enforcement, military personnel, and security forces
• Customizable options for men and women
• Ballistic threat levels IIIA to III.
• Comfortable and concealable
3
ATEKDefense.com
THE BEST PROTECTION AVAILABLE.ATEK offers ballistic armor for vehicles, buildings, walls and glass, as well as personal protective soft body armor that will consistently outperform anything else on the market. Choose the threat level you desire to protect against, and Atek has armor solutions that are thinner, lighter, more effective, and cost less than market competitors.
1-385-999-2255WWW.ATEKDEFENSE.COM
4
Standard & Comprehensive Vehicle Armor Solutions
Automotive Protection in the Line of Fire
ATEKDefense.com
5
COMPREHENSIVE VEHICLE ARMORING (Includes Standard Armor Protection)
• Armoring available for vans, trucks,
transports, and more
• Walls,ceilings,floors,engine
compartments, gas tank compartments,
entire interior walls (vans/other), custom
armored compartments and divider walls
• Runflattiresforadditionalsecurity
available upon request.
STANDARD ARMOR PROTECTION (Level IIIA to III++)
• 2 armored car door panels
• 2 armored car door windows
• 1 armored windshield insert
GLASS SPECS:• Ballistic glass
• Tested to stop 40 cal, 9 mm, and
45 cal
• We armor all standard industry
preferred vehicles
• Multiple threat levels including
handgunandrifleavailable
• Made in the USA
DOOR SPECS:• Level IIIA protection up to .44 mag
• Special threat protection
• Higher threat level protection
available
• Made in the USA
6
ELECTRONIC PROTECTION & ACCESSORIESOur electronic specialists can meet any type of electronic need. Here are a few custom accessories that other customers have included in their security vehicles.
• Interiorandexteriorvehiclecameras
• Antenna (satellite/cell) cradle (installed router)
• OBD2 - satellite (GPS and real time vehicle monitoring)
• Alarms - with remote call by phone and/or 2 way communications
• Backup monitors (whole system monitors)
• Keyless entries (single or multiple)
• Biometrics systems (starting, door locks and more)
• Magnetic hidden locks
• Strobe lights
• Emergency lights
• Car audio
• Two way radio - communications (HAM radio & antenna)
• Proximitysensors
• Remote shut-off (kill switch)
• Control center software
• Body-worn cameras linked to vehicle router
• Extrabattery
• Battery isolator
ATEKDefense.com
7
Co
urt
esy
: NA
SA
.go
v
CUSTOM OPTIONS AND ACCESSORIESOur electronic specialists can meet any type of electronic need. Here are a few custom accessories that other customers have included in their security vehicles.
• Additional and redundant door locks
• Lockdown actuators
• Shelves
• Installed safe and other equipment
• Concealed/secret compartments
• Secured compartments
• Gas cap lock
• Smash and Grab window protection on all non-armored windows
8
Lightweight & Powerful
We offer lightweight and affordable handgun door panel armor protection for police and security vehicles. Our level IIIA standard vehicle armor will stop all standard handguns from 38 special to 44 magnum. Unlike many metal armored doors which can weigh up to 350 lbs. per door, we only add 9-15 lbs. per door. Our armor can easily handle multiple shots. Our IIIA standard armor is thin enough that it still allows the Shield Glass to function in the door.
Made For Any Vehicle
Wecanretrofitbasicallyanyvehiclewithour Level IIIA standard vehicle panel armor. Our vehicle panel armor and Shield Glass productsarecustomfitforeachmake,modeland year. We can then make a template of that vehicle that we can use to mass produce them. We can install the armor and glass at our Utah location or at any ATEK authorized installersorwecantrainfleetmanagerstoinstall our armor.
Streamlined Installation
Installation for our armor has been streamlined for most vehicles. We remove the door panel and the window from the vehicle and the Shield Glass is inserted where the OEM glass was originally.
Manufactured in USA
We manufacture all parts of our vehicle armor right here in the USA. Our manufacturing plant is in Provo, Utah.
STATE OF THE ART CHARACTERISTICS
Clear Glass Armor
Our ballistic clear glass armor is called Shield Glass. Our most popular Shield Glass can be manufactured to meet multiple handgun threat levels. All of our Shield Glass products are rated for multi-shot and made tofitintowhatevermake,yearandmodelofvehicle you choose.
Shoot Out…Not In
OurhandgunShieldGlassisspecificallydesigned to stop bullet rounds coming in from the outside yet allow the driver the ability to shoot outside the vehicle and penetrate with deadly force.
Handgun Rated Functional Shield Glass
Our thinner level II glass will handle multiple shots from a 9 mm and 45 cal handgun with ease and still have full functionality to move up and down in the door.
Larger Caliber Guns
Other Shield Glass products can be manufactured to handle rounds rated at level IIIA up to III++. (Note: These larger caliber glass products are stationary and will not function in the door like our handgun rated glass.)
ATEKDefense.com
9
Armored Windshield
Wewanttomakesurethatourofficersareprotected from every direction including the windshield and back windows.
Vehicle Burglary Protection
We specialize in creating vehicle armor solutions for our law enforcement community. Because of the way we build our vehicle armor panels, we can manufacture each armored door panel and armored Shield Glass window right here inourplantandshipitouttoacertifiedinstaller near you.
NIJ & UL752 Standards
Our armored door panels have been tested to the NIJ IIIA standards. (Note: only body armorcanhavetheofficialdesignationofNIJcertifications).ArmoredShieldGlasswindows have been tested by 3rd party testing labs to UL752 rating level 6. Our UL752 level 6 Shield Glass is thin enough that it can still function in the door and roll up and down. We found this to be a benefittoourlawenforcementcommunityandsecurityvehicles.Manyoftheofficersthat have wanted ballistic protection, have expressedthattheyneedtohavethefunctionality of the window to help them do their jobs better – we listened!
Custom Security Solutions
Have an idea concerning a custom need for electronic security? Call us and ask. We haveamasterelectronicexpertsthatcanprobablyfigureouthowtomakeitwork.Theonlywaytofindoutisgiveusacallwith your idea.
Custom Security Vehicles
Whetheryouhaveacustomfitneedforlawenforcement, private security, cash-in-transit, banking, assets-in-transit, security for cash and product transportation, or other high security risk transportation, we can offer you a complete custom armored solution. We can also add safes, alarms, lights, key-less entry, bio-metrics, remote start and stop systems,exteriorsensors,customersecuritycontainers, and more. Ask us more about our custom electronic security services.
Smash and Grab Protection
With vehicle burglaries on the rise, there is a great need for additional protection to windows. This can be done with our smash resistantfilmaddedtotheinsideofthewindow using our patented process.
Althoughthisfilmisnotballisticallyrated,it is a lighter and low-cost option to help preventbreak-ins.Thisfilmensuresthatthewindows stay intact if shot or hit with a hard object.
STATE OF THE ART CHARACTERISTICS
10
Structural Armor For A Safer Workplace
BUILDING ARMOR
Armored protection ideal for police,
government, federal, county, and
school buildings, security companies,
warehouses, and others.
ATEKDefense.com
11
STRUCTURAL ARMORED WALL PANELSATEK structural armored wall panels provide extrasecuritytothosewhoneeditmost.Whether you are protecting the front entrance to a building from drive by shootings, creating a safe room, or protecting assets, we have you covered. Our armored wall panels come in threat levels of IIIA to level IV. Sizes range from .5 inches to 5 inches. We can install them for you or you can have a local contractor do it under our direction.
ARMORED ARCHITECTURAL SHIELD GLASSWe have multiple threat levels of armored shield glass available. You can choose from our UL752 level 6 which is only .5 inches thick and will handle 9mm and 45 cal, or our UL752 level 8 glass that is 2 inches thick. ATEK offers a “smash &grab”windowprotectionfilmthatisalighterand low-cost option to help prevent break-ins. Thisfilmisnotballisticallyrated,butstillallowsthe windows to stay intact if shot or hit with a hard object.
ARMORED BUILDING DOORSWe have armored and tamper-proof doors available. We work with a local door manufacturer and can customize doors with all threat levels from IIIA to level IV available.
SPECIALTY AND CUSTOM ARMORATEK can customize armor for judge or councilmen’s desks, wheeled dry erase boards, cubicle walls, school or commercial doors, window curtains, blinds, and many other items. Contact us about your custom armor needs.
GLASS SPECS:• Ballistic glass levels II to III
• Structural armored wall
panels
• Armored building doors
• Specialty and custom
armor available
• Multiple threat levels
includinghandgunandrifle
• Made in the USA
12
ATEKDefense.com
13
Laser Cut
Hi-Viz
Quick Release
1. Fully adjustable shoulders
2. Optional shoulder and neck protection
3. Optional bicep protection
4. Large ID patch area
5. Fully adjustable front cummerbund
6. Built in side protection plate pockets
7.Helmetprofiledneckprotection
8.Largeofficerdownstrap
9. Open top for quick plate removal
ATEK TACTICAL VESTS
FEATURES
2
34
5
9
71
14
ATEKDefense.com
15
Hybrid Carrier
T-Shirt Carrier
1. Fully adjustable shoulders
2. Large straps for adjustability
3. Available with NIJ.06 Level II or IIIA ballistics
4.Dualplatepocketaccommodates5”x8”–8”x10” trauma inserts
5. Spacer mesh inner lining to keep you cool & dry
6. Custom sizing or standard sizing available
ATEK CARRIERS
FEATURES
2
3
4
51
16
ATEKDefense.com
17
Trauma Plates + Level III And III Plus PlatesIn Conjunction With (ICW) Solution
+ IIIA trauma Plates
+5x7|5x8|6X8|7X9|8X10|10X12
+III+SAriflethreatplate
+IVSAriflethreatplate
+ Multi hit
+NIJcertified
ATEK HARD ARMOR SOLUTIONS
FEATURES
18
ATEKDefense.com
19
ATEK HARD ARMOR SOLUTIONS
+ DETAILS: Flat or single curve weapon mount design with exclusivecontouredaprondesignated to allow better transitioning through narrow spaces such as bus, airline and train aisles while still maintaining a large area of torso protection.
+EXCLUSIVEcontourmoldedpatent pending forearm pad provides improved lateral stability. Stabilizing forearm strap.
+ OPTIONAL LED light kits available
+ SIZES:Compact18”x30”,Entry24”x36”,Entry24”x48”
+ COLORS: Urban Gray, Carbon, Black, Coyote and, Ranger Green
Shields IIIA
FEATURES
20
ATEKDefense.com
21
HIGH-CUT MICH IIIA
PASGT
+ 1150cm2 – 1250cm2 ballistic area
+ IIIA NIJ threat level
+ Laminate reinforced aramid / impregnated with phenolic resin
+ Colors: Black, Khaki, Olive Green, UN Blue
+M|L
+ 2.87 lbs. (Includes Accessories)
ATEK BALLISTIC HELMETS
+ 1150cm2 – 1250cm2 ballistic area
+ IIIA NIJ threat level
+S|M|L|XL
+ Colors: Black, Khaki, Olive Green, UN Blue
+Aramidfiber/impregnatedwithphenolic resin
+ 3.2 lbs. (includes accessories)
FEATURES
FEATURES
22
ATEKDefense.com
23
Ready-To-Go Protection Great for Undercover Agents in a Crowd
For some, wearing actual body armor full-time isn’t practical, which is why we developed the Ready To Go (RTG) System. The RTG system allows you to easily carry armor with you always. When needed, you can deploy a full bulletproof armored vest in less than 2 seconds without removing the backpack. The RTG armored ballisticpackeasilyattachestoaretrofittedOGIObackpack(Axel).Itzippersonandoffeasily allowing the user to swap backpacks. The backpack can also be worn by itself.
+ChestSizes35”to65”|BeltSizes:30” to 65”
+ Level IIIA: Stops all level II plus .357 sig&.44mag|arealdensity1.32lbs/sq.ft.|thinness0.24in.
+ Ready To Go – rapid armor deployment in under 2 seconds
+ Front, back and side armor protection
+ 5 year armor warranty
RTG ARMORED BACKPACK
+ Concealed weapon pockets in armorpack(ambidextrous)
+ Modular design allows for backpack to be removed and worn by itself
+Velcrotoattachfirearmholster(sold separately)
+ Bulletproof, ballistic backpack with concealed armor until it is deployed
+ Made in the U.S.A.
FEATURES
24
ATEKDefense.com
25
SHADOW CONCEAL VEST
+SizesS,M,L,XL,XXL
+ Threat Level IIIA : Stops all TLII plus .357 Sig, .44 Mag|Arealdensity1.32lbs/sq.ft.–0.24”thick
+Protek–Graphenemicrofibertechnology
+ Breathable
+ Removable armor shields/washable outer layer
+Maximumshockabsorption=20%lessBFS
+ 7-year Armor Warranty
+ Waterproof armor shields
+ Water wicking modern fabric draws moisture away from the body
+ DWR Antimicrobial coating
+ Shrapnel resistant
+ Stab resistance up to 20 PSI
+ Tested for NIJ level IIIA standards (0101-06)
+ Made in the U.S.A.
High Performance Vests for Law Enforcement
Get the best coverage of all our armor: front, back, and side to side. The Shadow Conceal Vest carrier is ultra-concealable for everyday use and willprovideexcellentprotectionandcomfortas you go about your day. Whether blue-collar, white-collar or no-collar, the Shadow Conceal Vest will keep you protected from almost any pistol round.
As with all our armor, The Shadow Conceal Vest ismadewithProtek™,ultra-lightweightflexiblearmor. Unlike many more traditional vests, The Shadow Vest armor is also waterproof, so no amount of swimming or sweating is going to undo your ballistic protection. The antimicrobial, breathable mesh lining will keep you and your armor fresh through the long summer days. The Shadow Conceal Vest adjusts at the shoulders andsidestofiteverybodytype.
FEATURES
26
ATEKDefense.com
27
Nearly Invisible Personal Protection
Ourbest-seller,forit’sform-fittingflexibilityandcomfort,The PRO-Shield™ answers the demand for a completely concealable armor system. By harnessing the protective propertiesofProtek™withgraphenemicrofibers,wehaveproducedthisultra-lightweight,flexiblearmor.ThePRO-Shield™ discreetly covers the vitals, front and back (heart, lungs, and liver). About ¼” thick, the armor can be concealed by almost any clothing. ATEK Defense Systems inserts work in conjunction with a compression shirt, which molds the armor to the body. Our legendary shock absorption means less kinetic energy makes itthrough.Orintechnicalterms,20%lessbackfacesignature (BFS) than our competitors.
Ahead of its time, this armor system also comes with our formidable
7-year warranty.
Compression Shirts in black and white
+Sizes:S,M,L,XL,XXL
+ Threat Level IIIA : Stops all TLII plus .357 Sig, .44 Mag|Arealdensity1.32lbs/sq.ft.-0.24”thick
+Protek–Graphenemicrofibertechnology
+ Removable armor shields/washable outer layer
+Maximumshockabsorption=20%lessBFS
+ 7-year Armor Warranty
+ Waterproof armor shields
PRO-SHIELD™
+ Water wicking modern fabric draws moisture away from the body
+ DWR Antimicrobial coating
+ Shrapnel resistant
+ Stab resistance
+ Tested for NIJ level IIIA standards (0101-06)
+ Made in the U.S.A.
FEATURES
28
1. Able to take multiple hits from many different rounds.
2. Able to substantially limit trauma and debilitating injury from Back Face Signature (BFS).
3. Able to maintain mobility and quick reactions while being light-weightandflexible.
The 3 Required Elements
of Body Armor Are:
Body armor with
Protek™
on the INSIDE
ATEK Protek can do that, and MORE…ATEK Defense Systems uses a proprietary formula called Protek, which slashes weight by up to 66%comparedtotraditionalvests.Notonlydoesitweighless,butmobilityandflexibilityarenotcompromised with our Protek technology that moves with bodies of all shapes and sizes. Our soft bodyarmorhasunparalleledflexibilityandisspecificallymadetoconformtothecontoursofhumananatomy, providing both men and women greater comfort as well as safety.
Unliketraditionalaramidfibers,Protekhasbeenproventofunctionevenaftercompletesubmersioninwater, neutralizing a key weakness of common soft body armor. In addition to being water resistant, ATEK soft body armor is impervious to UV light and atmosphere and doesn’t degrade like traditional bodyarmor,whichmakesoursoftbodyarmorfarmoredurableandcostefficient.
We don’t have to remind you of the traditional body armor of the past…but how can you forget that they are bulky, thick, heavy, stiff, and frankly prone to failure if they took multiple rounds or happened to get wet. They also degrade as they age and have a standard life of 3-5 years.
ATEKDefense.com
29
7 Years, $1,000,000.00 in Liability Insurance + FREE ReplacementBecausewe’resoconfidentintheperformanceofourproducts,wecarrya$1,000,000.00LiabilityInsurance Policy against failure.
In addition, you receive a formidable, 7-year warranty* on all Protek soft body armor – unparalleled in the industry, and a key cost saver for units and individual users.
Furthermore, we’ll provide FREE replacement of any product whenever a wearer of our product is shot on duty. Who else stands behind their body armor at such a remarkable level?
Protek™ is the material of the FutureGreat strides have been made in recent years, including our revolutionary, proprietary, graphene microfibertechnology,wecallProtek.ThismaterialofthefutureismanufacturedbyATEKDefenseSystems, and is a micro-reinforced, high tensile strength composite created for use in soft armor solutions.Harnessingthestrengthofaramidfibers,graphenemicrofibers,andotherhighstrengthmicro materials, Protek is designed to rapidly disburse energy away from the body.
113 rounds stopped by ONE VEST…and still counting!So far, we’ve shot a single piece of our armor with a wide assortment of handgun rounds 113 times – at last count – and it just keeps stopping those bullets time and time again.
.22LR, .380 cal., 9mm, .40 cal., .45 ACP, 38 Special, 357 Mag, 357 Sig, .44 Mag, Our advanced Protek soft body armor has stopped them all…every time.
with various caliber rounds, from .22 to .44 Mag. So far, no breach...perfect penetration protection.
At last count, this sample of our standard armor has been
shot 113 times
30
It’s about a lot more than Bullet Blocking…Stoppingbulletsisthefirststep,butasyouwellknow,BackFaceSignature(BFS) – or the trauma behind the armor – is sometimes as dangerous as bullet penetration.
The NIJ has developed a strict set of guidelines for law enforcement, military and security body armor. These standards are accepted around the world. NIJ allows 44mm (or about 1.75 inches) of BFS to pass standards.
Even though the bullet doesn’t penetrate the vest, imagine the damage that could be caused to muscle, bone and internal organs. Not only could it knock you down but it could render you incapacitated, unable to move, and left in harm’s way.
ATEKarmormeetsandexceedsminimumNIJstandards.OurarmorhasbeenspecificallyengineeredtogreatlyreducetheamountoftraumaorBFS.Shotwith 9MM rounds, ATEK products typically score in the mid to high teens (14mm–19mm),whichis20%betterthanstandardcompetitors.
Translation…Taking a hit will never feel like a warm bubble bath, but by wearingourNIJcertifiedarmoredproducts,you’llremainmobileandcapable while being protected.
Shrapnel? Knife attacks? You can thwart many of them as well. This lightweight armor will truly astound you. More important, it could SAVE you!
Get Armored Today!ATEK Defense Systems offers a variety of personal body armor products, vehiclearmor,andbuildingarmortomeetyourspecificneeds.
Check out all of our products here, then select the ATEK Defense Systems products that are right for
you, and go to our website now to order your safety, comfort and peace of mind…at www.ATEKdefense.com
ATEKDefense.com
31
A PASSION FOR PROTECTIONATEK Defense Systems is a Utah-based company offering a unique combination of armored products including personal protection armor, vehicle armor, and building armor. We have a small business, family-oriented culture which allows us to interact personally with our customers and their needs. Our customer relationships allow us to stay ahead of our competition by always being in the innovation mode and quickly bringing needed products to market. We highly value the relationships we have with our customers, employees, and those we serve in the community. We care deeply about the lives our products are made to protect, and feel it is our responsibility to build the best and safest products possible.
MISSION:ATEK has a passion for protection. We know that the freedoms we enjoy are because of the brave men and women who have committed to protect us. We feel it is our sacred duty to protect these individuals who protect our freedoms. We have dedicated our resources to help by providing effective lifesaving armor solutions.
VISION:We want organizations to think of ATEK when they need protection. We aspire to become the premier armor solution and protective products company in the world…a one stop shop for the best protection on the planet. Protecting heroes is our duty and passion.
VALUES: Exemplaryqualityandservice
Innovative armor and protective solutions
Competitive prices
Unparalleled reliability
International outlook
www.ATEKDefense.com+1.385.999.2255
Contact ATEK Defense Systems now to get a quote for your armor needs.
VEHICLE ARMOR • BUILDING ARMOR • PERSONAL PROTECTION
