VendingMiser® reduces energy consumption by an average of 46%, typically $150 per machine, per year.
Energy Management System for Refrigerated Vending Machines
VendingMiser®
Improve the profi tability of your existing cold drink machines.
VendingMiser® puts you on a cost-eff ective refresher course for energy savings and conservation. No need to purchase new machines to reduce operating costs and greenhouse gas emissions. When equipped with the Vending-Miser, refrigerated beverage vending machines use less energy and are comparable in daily energy performance to new ENERGY STAR qualifi ed machines.
VendingMiser® cuts energy costs down to size.VendingMiser incorporates innovative energy-saving technology into a small plug-and-play device that installs in minutes.
VendingMiser® brings you...• A quick, inexpensive solution for immediate
energy savings and conservation• Longer machine lifespan• Early ROI (with the many utility rebate programs available, itcould cost your facility nothing to obtain & install)
• Environmental benefi ts• Compatibility with all cold drink vending machines
This Miser runs the bank...For a series of up to four machines, VendingMiser® can use its embedded Sensor Repeater, which allows it to be controlled from the PIR sensor of any other Miser in the bank.
How VendingMiser® WorksExternal EnergyMisers use a controller and a machine mounted sensor to monitor room occupancy and temperature. If 15 minutes pass without any pedestrian traffi c, the EnergyMiser will power down the machine. The machine is pow-ered back up when people return and at regular intervals to to keep the product cold.
MACHINE
The VendingMiser is plugged into a power source
The machine is connected to an VendingMiser
The VendingMiser Occupancy Sensor is connected to the Controller and mounted on a wall or the machine so it can detect pedestrian traffi c.
The VendingMiser Controller is mounted on a wall or the machine.
Technical Specifications Electrical Specifications
Input Voltage: ......................115 VoltsInput Frequency: ................ 50/60 HzMaximum Load: ................. 12 Amps (Steady-State)Power Consumption: ........ Less than 1 Watt (Standby)
Environmental SpecificationsOperating Temp: ................ -15°C to 75°CStorage Temp: ..................... -40°C to 85°CRelative Humidity: ............. 95% Maximum (Non-
Condensing)
CompatibilityVending Machines: ............ Any machine, except
those containing perish-able goods such as dairy products
Inactivity TimeoutsOccupancy Timeout: ......... 15 minutesAuto Re-power: ................... 90 minutes maximum. Dy-
namically adjusted, based on ambient temperature
DimensionsSize: ........................................ 4.5”W x 1.75”H x 3.25”DWeight: .................................. 2.2 lbs. (includes power
cable)
Regulatory ApprovalsSafety: ................................... UL/C-UL Listed Informa-
tion Technology Equip-ment (ITE) 9T79
Visit www.vendingenergymisers.com for additional energy saving products, pricing and energy savings analyses.
Sanders and Associates 1601 Tyrone Road, Troy, OH 45373 • 937.216.9766/235.0293 • [email protected]
Frequently Asked Questions
Will VendingMiser keep my drinks cold?Absolutely. VendingMiser has been tested and accepted for use by both The Coca-Cola Company and The Pepsi-Cola Company.
Is the VendingMiser easy to install?Yes! VendingMiser is a simple external plug-and-play product. The VendingMiser can be installed on a wall with simple hand tools or it can be attached to a vending machine without tools using the EZ Install system in just 5 minutes.
Is VendingMiser safe for all machines?Yes! VendingMiser is compatible with all types of cold drink vending machines. In fact, by reducing run time of the machines, Vending-Miser reduces maintenance costs.
Has VendingMiser been field tested?Tens of thousands of VendingMisers are operational in the field. Typical energy savings has been independently documented to be between 35% and 45%. Measurement and verification test results as well as testimonials are available on the website.
Are there locations inappropriate for VendingMiser?VendingMiser’s savings are generated as a result of location vacancy. So a machine in a location that is occupied 24-hours, 7 days a week will likely generate little savings. Our VM2IQ® is more appropriate for this type of location and will typically save up to 35% energy use.
Who uses VendingMisers?Several large retailers such as Wal-Mart and Kroger have installed EnergyMiser Products at their locations. Educational facilities along with the US Government have purchased EnergyMisers through GSA.
VendingMiser ModelsVM150 - For use indoors when wall mounting.VM151 - For use as secondary unit when indoors and wall mounting.VM160 - Weatherproof model for use outdoors when wall mounting.VM161 - Weatherproof model for use as a secondary unit when outoors and wall mounting.VM170 - For use indoors when machine mounting.VM171 - For use as secondary unit when indoors and machine mounting.VM180 - Weatherproof model for use outdoors when machine mounting.VM181 - Weatherproof model for use as a secondary unit when outdoors and machine mounting.VM2iQ - Internally mounted model for use in high occupancy locations.