1
viper VENOM Tile & Grout Cleaner VIPER VENOM is used as a pre-treatment spray on grout and tile to loosen and emulsify soils and stains, and to facili- tate soil removal using the SX-12 or SX-15 Grout and Tile Tool. Viper Venom is also effective for general floor clean- ing and upkeep, wall cleaning, and other general hard surface cleaning. Viper Venom, with its hard-hitting blend of build- ers, solvents, and surfactants, is also ideally suited for fire res- toration. DIRECTIONS: Grout and Tile restoration: Dilute Viper Venom with 1 part hot water. Low pressure spray onto grout and tile and allow to dwell for 5 minutes, but do not allow to dry before cleaning/extracting. Grout and tile maintenance: Dilute Viper Venom with 16 parts warm water. General cleaning and walls: Dilute Viper Venom with up to 32 parts warm water. Dilute 1 part Viper Venom with 9 parts water for woodwork. For cleaning porcelain and chrome: dilute 1 part Viper Venom with 12 parts water. Hydro-Force | 4282 South 590 West Salt Lake City, UT 84123 www.hydroforce.com • (800)-637-3789 See Material Safety Data Sheet at www.hydroforce.com\msds for safety and regulatory information. Available in Gallons and 4 x 1 gallon cases | 5 gallon pails | 55 gallon drums Part # CR22GL Grout & Tile General Cleaning Fire Restoration = Primary Use = Secondary Use by RTU ph - 12.0 • The industry’s #1 selling tile & grout cleaner • Can be used on natural stone for restoration cleaning when rinsed effectively with SX-12 or SX-15 Hard Surface cleaner • Excellent cleaner for fire and smoke damage cleaning of hard surfaces
