Ventilation - RecuperationAir Handling Units for home, office, and shop applications
Heating solutions for youDiscover Kaisai product range
Heat pumps
Air conditionerswith heating
function
Air curtains
2
KVX 150 RHQ page 6 page 10KVX 270 RHQ | KVX 360 RHQ | KVX 460 RHQ
The Kaisai recuperation units are highly efficient ventilation systems with a heat recovery function, designed for mechanical ventilation of houses, offices, and shops. When in operation, they exchange the ex-haust air from the interior for the air drawn from the outside and purified
by means of a special high-performance filter class F7. The counter-cur-rent heat recovery exchanger prevents heat loss during the winter, by recovering up to 92.5% of the energy. The recovered heat is transferred to the purified air supplied into the rooms.
ventilation - recuperation
Kaisai Air Handling Units
Up to 92.5% of recovered heat
3
RecuperationHeat recovery for home, office and shop applications
What does heat recovery consist of? Recuperation is a type of mechanical ventilation supplemented with heat recovery. A recuperator makes it possible to control the movement of the air supplied to the room and to recover heat from the polluted air coming from inside the house. The recuperator is the heart of your house designed to recover the heat and use it to heat up the fresh air. Additionally, the filters installed inside the recuperator clean the air from viruses, pollutants, allergens and smog.
4
The ventilation systems from Kaisai are designed and manufactured, according to the state-of-the-art trends in technology.
Our Air Handling Units are manufactured in compliance with the EcoDesign Di-rective, which means that they meet the requirements of the Regulation of the European Commission No. 1253/2014 – 1254/2014, being consistent with the Standard WT-2021.
Quiet operation
Energy-efficient
Modern design
High filtration class – F7/M5 filter
Intuitive control
Easy to use
Universal installation
R E A DY
The advantages offered by our units
5
For home
R E A DY
ABS inlet/outlet connection ports
A drain pipe for condensate
A tray for condensate collection
An EC fan with backward-curved blades to provide constant airflow control
High efficiency filters compliant with ISO 16890: class F7 for supply air, class M5 for exhaust air
The heat exchanger – a counter-current recuperator with efficiency up to 88%
Main power supply board with a built-in display
The front panel is galvanised, insulated, and painted in RAL 9003
The external structure is based on hot-dip
galvanisedsteel sheets
ABS plugs for inverting inlet/outlet connections
for air distribution
The internal structure is made of high
density polystyrene
This device is dedicated for apartments, detached-, terraced-, or semi-detached houses with the total area of up to 80 m2.
• Universal vertical/horizontal installation
• High-performance filters (F7 – supply, M5 – exhaust)
• Universal top/side connection ports
• Enclosed automatic control system
• Quiet operation
• Low height (size of the unit is only 18 cm)
Built-in control panelwith a display performs the calibration and activation of the unit
Wall-mounted remote controller KV-S RHQ (optional)
Air Handling Unit for your home
DESIGN FEATURES
KVX 150 RHQ
7
D
B
C
A
D
B
A
C
D
A
C
B
The device can be mounted both vertically or horizontally. Additionally, thanks to the ports located on both sides of the device, it is possible to install the connections both from above and from the side.
The unit features a controlpanel with a display
The optional external KV-S RHQ remote controller activates other ventilation modes.
The control system is easy to use and provides access to a technical menu and the following functions:
• automatic fan adjustment• setting the time of filter replacement • setting the automatic mode of operation by means of a built-in humidity detector• starting an external electric heater (optional)• visualisation of working parameters• visualisation of alarms and messages about filter changes
Intuitive control
Vertical installation Horizontal installation Connection options
Universal installation
8
QmaxThe maximum flow rate at the
maximum motor speed and an external static pressure of 100 Pa
SEC Specific power consumption
Qref Reference flow rate - 70% of Qmax LWA
LKI
Sound power level emitted by the unit
PelPower supply at Qref and an
external static pressure of 50 PaInternal leakage at 100 Pa and
when compared to Qref
ηt_rvu Thermal efficiency at Qref LKEExternal leakage at 250 Pa
and when compared to Qref
SPI Specific power consumption
HEP Heater powerCTRL Control factor - centralised
automatic control system
Model Qmax
[m3/h]Qref
[m3/h]Pel
[W]ηt_rvu
[%]SPI
[W/m3/h] CTRL SEC[kWh/m2a]
Energy class
Filtration class
LWA
[dBa]LKI
[%]LKE
[%]HEP[W]
KVX-150 RHQ 150 105 56 87% 0.227 0.85 -39.90 A F7 / M5 38,0 1,8% 0,8% -
Model A B ø C H D E F Weight with packaging
Weight without packaging
KVX-150 RHQ 602 191 125 975 104,6 390 762 25 kg 23 kg
Dimensions (mm)
150
0
25
50
75
100
125
150
175
200
225
250
50 70 90 1101 30 150 170 190 210 230 250
ØC
BA
H
547
167
16
17
204
E
F
104,6
94
KVX 150 RHQTECHNICAL SPECIFICATION
CHARACTERISTICS OF AIR CONSUMPTION AND COMPRESSION RATIO
Airflow [m3/h]
Exte
rnal
pre
ssur
e [P
a]
9
For home,office or store
R E A DY
Air Handling Units for your home, office or storeKVX 270 RHQ | KVX 360 RHQ | KVX 460 RHQ
ABS ports for inlet/outlet airflow connections
A highly efficient heat recovery exchanger
with exchangeable PET counter-cur-rent plates. The achievable efficiency
can be higher than 90%, since it provides a counter-current heat transfer
between the two airflows at different inlet temperatures. The static heat recovery
units do not contain any moving parts and guarantee highly reliable and safe operation.
To increase the efficiency of the heat exchanger, the surfaces of the plates
feature special whirl vanes.
By-pass Made entirely of ABS and
powered by a Belimo rotor
KV-S controller
Secondary by-pass throttling valve
Supply air fan• A fixed single-phase synchronous EC motor
with overheating protection for the motor and its electronic components
• High performance ABS fans with backward-curved blades
High performance filters compliant with EN779: 2012;The filters have the following classes:• F7 class for supply air• M5 class for exhaust air
Fan access seal made of EPDM
Filter access seal made of EPDM
An electric heater for defrosting Temperature-resistant, with a reinforced insert, controlled by PWM signals (applicable only for the version with an increased resistance)
Exhaust air fan• A fixed single-phase
synchronous EC motor with overheating protection for
the motor and its electronic components
• High performance ABS fans with backward-curved blades
KV – front panel• made of hot dip galvanized steel
sheet painted in RAL 9003• a satin finish obtained with epoxy
paint dried in an oven at 180°C• side panels insulated with a 25
mm-thick liner• fully removable and insulated inspec-
tion cover with a 30 mm-thick liner
DESIGN FEATURES
KV-S RHQA modern programming device with many functions, offering the possibility of controlling and protecting the device in different working modes.
The Kaisai air handling units / recuperation units are high-performance heat recovery units designed for mechanical ventilation of houses, apartments, offices, and showrooms. The units ensure economical and intuitive operation and are made of high quality materials.
• Easy installation on the wall or as a free-standing device
• High-performance filters (F7 - supply, M5 - exhaust)
• A plug and play device with a modern programming device
provided on the housing
• Housing made of galvanised steel, powder painted, PS filling
• Low energyEC fans
• Quiet operation of the air handling unit
• 100% air-tight by-pass
11
In addition to the standard on-wall installation, it is also possible to mount the device as a free-standing unit, using an optional frame.
Intuitive control
Universal installation
200-
225
200-
225
A
B
200-
225
GR A B1 523 4592 523 5343 523 5844 583 634
Wall-mounted Stand-alone
Modern controller KV-S RHQ
A programming device with many functions, offering the possibility of controlling and protecting the device in various working modes:
• A weekly mode with individual adjustment• Fast master modes Party / Holidays• The possibility to connect humidity, CO2 concentration,
and differential pressure sensors• The possibility of moving the programming device
anywhere within the building• An intuitive menu based on icons• Touch pad control
Holidays mode Party mode Automatic mode
12
QmaxThe maximum flow rate at the
maximum motor speed and an external static pressure of 100 Pa
SEC Specific power consumption
QrefReference flow rate
- 70% of Qmax LWA
LKI
Sound power level emitted by the unit
PelPower supply at Qref and an
external static pressure of 50 PaInternal leakage at 100 Pa and
when compared to Qref
ηt_rvu Thermal efficiency at Qref LKEExternal leakage at 250 Pa and
when compared to Qref
SPI Specific power consumption
HEP Heater powerCTRL Control factor - centralised
automatic control system
Model A B ø C H D E F Weight with packaging
Weight without packaging
KVX-270 RHQ 547 580 160 1041 106 111 240 64 kg 48 kg
KVX-360 RHQ 547 630 160 1041 106 111 290 66 kg 50 kg
KVX-460 RHQ 660 680 180 980 147 126 305 75 kg 59 kg
Model Qmax
[m3/h]Qref
[m3/h]Pel
[W]ηt_rvu
[%]SPI
[W/m3/h] CTRL SEC[kWh/m2a]
Energy class
Filtration class
LWA
[dBa]LKI
[%]LKE
[%]HEP[W]
KVX-270 RHQ 270 190 35 86.5% 0.184 0.95 -39.3 A F7 / M5 46.6 0.4% 1.4% 900
KVX-360 RHQ 360 250 53 90.1% 0.209 0.95 -39.6 A F7 / M5 49.0 0.7% 2.7% 1250
KVX-460 RHQ 460 320 76 88.6% 0.237 0.95 -38.4 A F7 / M5 47.9 0.3% 0.7% 1600
Dimensions (mm)
Model A B
KVX-270 RHQ 523 534
KVX-360 RHQ 523 584
KVX-460 RHQ 583 634
Frame dimensions (mm)
Installation of the free-standing version (optional)
Screwed-on support feet and a lifting structure. The height of the support feet can be adjustedin the range of 200-225 mm.
0
25
50
75
100
125
150
175
200
225
250
275
300
325
350
375
400
50 100 150 200 250 300 350 400 450 500
270
360
460
C
D D
F
E
8
A
H
42
2
8 B 8
H
AB
TECHNICAL SPECIFICATION
CHARACTERISTICS OF AIR CONSUMPTION AND COMPRESSION RATIO
200-
225
200-
225
A
B
200-
225
GR A B1 523 4592 523 5343 523 5844 583 634
KVX 270 RHQ | KVX 360 RHQ | KVX 460 RHQ
C
D D
F
E
8
A
H
42
2
8 B 8
H
AB
Airflow [m3/h]
Exte
rnal
pre
ssur
e [P
a]
13
KVX Wi-Fi module (optional)
The KVX Wi-Fi expansion module allows the remote control of the control panel using modern wireless tools (smartphone, tablet).
The user can remotely enter and check the working parameters of the recuperator, after installing the module, connecting it to a router, and downloading the free software.
Download the app by scanning the QR code
System configuration
ROUTERINTERNET
CABLE
ETHERNET
serial bus line up to 60 units
CLOUD
Changing the operating mode, temperature and
fan speeda mobile app for Android and IOS
monitoring basic information about the
operating device
Wi-Fi control
14
Model Net priceEUR
KVX-150 RHQ Air handling unit 150 2 380
KVX-270 RHQ Air handling unit 270 3 750
KVX-360 RHQ Air handling unit 360 3 870
KVX-460 RHQ Air handling unit 460 4 070
Accessories
KV-S RHQ On-wall controller for model 150 150
KV-ES-SU Humidity sensor 80
KVX WIFI Wi-Fi module 500
Base
KV-P 270 RHQ Base for model 270 170
KV-P 360 RHQ Base for model 360 175
KV-P 460 RHQ Base for model 460 180
Filters
KV-F 150 RHQ Air filter F7/M5 - for model 150 130
KV-F-270 RHQ Air filter F7/M5 - for model 270 137
KV-F 360 RHQ Air filter F7/M5 - for model 360 145
KV-F 460 RHQ Air filter F7/M5 - for model 460 160
The purchase prices contained in the price list are all net prices in EUR. | The price-list does not constitute an offer within the meaning of art. 66 of the Commercial Code, while all photos of the products are only examples and provided for the purpose of presenting the selected models. | The actual products may differ from the ones demonstrated in the pictures. | The products are subject to continuous improvement. Therefore, Kaisai reserves the right to change their prices and technical parameters without prior notice. | The current price list is no longer valid.
This document is provided for the purpose of giving information about and presenting air handling units for ventilation / heat recovery manufactured by Kaisai. | Since the technologically
advanced production process necessitates its continuous control and improvement, the information contained in this publication may be subject to change. | The net prices provided are
catalogue prices for the products and do not include any discounts or installation costs. | The technical data and prices included in the folder are subject to change. Up-to-date information
is always available on www.kaisai.com
Product price list2020
15
kaisai.com