Measuring tools
Vernier Calipers MIB Messzeuge Germany
Precision micrometers
Dial indicators
Dial supports
Magnetic dial supports
Digital thickness gauges
Precision inside micrometers
Vernier caliper standard model
Satin chrome finish, hardened.
4-way measurements.
Backside Metric ISO and Withworth screw table.
Automatic lock.
In case.
Number Description
330400 150 mm range nonius mm/inch
330402 200 mm range nonius mm/inch
Vernier caliper standard model
Satin chrome finish, hardened.
4-way measurements.
Backside Metric ISO and Withworth screw table.
Screw lock.
In case.
Number Description
330416 150 mm range nonius mm/inch
330417 200 mm range nonius mm/inch
Precision vernier caliper with screw lock DIN 862
Made of stainless steel, satin chrome finish, hardened.
4-way measurements.
Backside Metric ISO and Withworth screw table.
Nonius above 1/20-39, nonius blow 1/128"
In case.
Number Description
330410 150 mm range nonius mm/inch
330412 200 mm range nonius mm/inch
330414 300 mm range nonius mm/inch
Precision vernier caliper with screw lock DIN 862
Made of stainless steel, satin chrome finish, hardened.
4-way measurements.
Backside Metric ISO and Withworth screw table.
Nonius above 1/50-49, nonius below 1/1000"
In case.
Number Description
330410 150 mm range nonius mm/inch
330412 200 mm range nonius mm/inch
330414 300 mm range nonius mm/inch
Precision vernier caliper with fine adjustment
With fine adjustment and lock screw.
Satin chrome finished, hardened with depth gauge.
4-way measurement.
In case.
Number Description
330418 200 mm range nonius mm/inch
330419 300 mm range nonius mm/inch
Top
Pag. 00/08
Precision vernier caliper with set screw TOP DIN 862
With lock set screw.
Made of stainless steel satin chrome finish, hardened.
4-way measurement.
With higher sliderails.
Backside Metric ISO and Withworth screw table.
Nonius above 1/20-39, nonius below 1/128"
In case.
Number Description
330190 150 mm range nonius mm/inch
330192 200 mm range nonius mm/inch
330193 300 mm range nonius mm/inch
Vernier caliper brass DIN 862
Non magnetic, special developed for measuring
at heavy magnetic areas or magnetic
workpieces.
With lock screw.
In case.
Number Description
330195 150 mm range nonius mm/inch
Dial caliper shockproof DIN 862
Made of stainless steel, hardened.
4-way measuring. MM/INCH
Backside Metric ISO and Withworth screw table.
Reading 0,02 mm 1x round 2 mm.
In case.
Number Description
330300 150 mm jaw 40 / 20 mm
330302 200 mm jaw 50 / 24 mm
330304 300 mm jaw 60 / 25 mm
Dial caliper shockproof DIN 862
As type above only difference is the reading.
Reading 0,01 mm 1x round 1 mm.
Number Description
330301 150 mm jaw 40 / 20 mm
330303 200 mm jaw 50 / 24 mm
330305 300 mm jaw 60 / 25 mm
Vernier caliper fiberglass plastic Wiha CaliMax
Non-metal high-tech material with 50%
fiberglass. Reading 0,1 mm / 1/64".
Green/white reading at the nonius.
Number Description
330400P 150 mm jaw 40 / 20 mm
Digital vernier caliper with data output DIN 862
Made of stainless steel, hardened.
4-way measuring. MM/INCH
Reading 0,01 mm or 0,0005".
Accuracy 0,03 mm
On/Off function, MM/INCH unit.
In plastic case.
Data exit RB 2
Battery 1,5V V357 (number 330200)
Number Description
330420 150 mm jaw 40 / 21 mm
00-08.1
Digital vernier caliper with Bluetooth IP67 DIN 862
Inductive measuring systeem
IP 67 protection, water and dust proof.
Made of stainless steel, hardened.
4-way measuring. MM/INCH
Reading 0,01 mm or 0,0005".
Accuracy 0,03 mm
On/Off function, MM/INCH unit.
In plastic case.
Battery 3V CR 2032 (number 7702469)
Number Description
330310 150 mm jaw 40 / 21 mm
330311 200 mm jaw 50 / 24 mm
330312 300 mm jaw 60 / 26 mm
330313 150 mm jaw 40 / 21 mm
With Ø1,6 mm round depth bar.
Digital vernier caliper with carbide measuring faces IP 67 DIN 862
Equiped with a Sylvac-Electronic measuring unit.
Carbide measuring faces.
IP 67 protection, water and dust proof.
Made of stainless steel, hardened.
4-way measuring. MM/INCH
Reading 0,01 mm or 0,0005".
Accuracy 0,03 mm
On/Off function, MM/INCH unit.
ABS Function
In plastic case.
Battery 3V CR 2032 (number 7702469)
Number Description
330315 150 mm jaw 40 / 21 mm
330316 200 mm jaw 50 / 24 mm
330317 300 mm jaw 60 / 26 mm
Digital vernier caliper Non Magnetic DIN 862
Made of stainless non magnetic steel.
With round Ø3 mm depth bar.
4-way measuring. MM/INCH
Reading 0,01 mm or 0,0005".
Accuracy 0,03 mm
On/Off function, MM/INCH unit.
HOLD Function.
Data-exit RB 5
In plastic case.
Battery 3V CR 2032 (number 7702469)
Number Description
330330 150 mm jaw 40 / 21 mm
330331 200 mm jaw 50 / 24 mm
330332 300 mm jaw 60 / 26 mm
Digital vernier caliper IP 54 Absolute-System DIN 862
No limit for moving tempo.
Scale with glass rail for precision sampling.
Usable without roll (fitting included).
4-way measuring. MM/INCH
On/Off function, MM/INCH unit.
HOLD Function, Absolut-system
Accuracy 150 & 200 mm 0,02 mm
and at 300 mm 0,03 mm. Data-exit RB 6
Battery 3V CR 2032 (number 7702469)
Number Description
330423 150 mm jaw 40 / 21 mm Bluetooth data zender optioneel.
330424 200 mm jaw 50 / 24 mm
330425 300 mm jaw 60 / 26 mm Top 00-08.2
Digital steel wire vernier caliper.
Special caliper with large-sized measuring faces.
Made of stainless steel, hardened and with
metal casing.
Reading 0,01 mm or 0,0005".
Accuracy 0,03 mm
On/Off function, MM/INCH unit.
HOLD Function.
Data-exit RB 5
In case.
Battery 3V CR 2032 (number 7702469)
Number Description
330350 150 mm
a = 27 mm
b = 25 mm
d = 16 mm
Control caliper standard version DIN 862
Made of stainless steel.
Scale and nonius satin chrome finish.
With 10 mm points.
Monoblock type.
Reading 0,05 mm + 1/128"
In wooden case.
Number Description
330428 200 mm jaw 60 / 40 mm
330429 250 mm jaw 80 / 40 mm
330430 300 mm jaw 100 / 40 mm
Control caliper with fine adjustment DIN 862
Made of stainless steel.
Scale and nonius satin chrome finish.
With 10 mm points.
Monoblock type.
Reading 0,05 mm + 1/128"
In wooden case.
Number Description
330900 200 mm jaw 60 / 40 mm
330901 250 mm jaw 80 / 40 mm
330902 300 mm jaw 100 / 40 mm
Control caliper with fine adjustment
Without points.
Made of stainless steel.
Scale and nonius satin chrome finish.
With fine adjustment and lock screw.
Works standard. In transport box.
Reading 1/20 = 0,05 or 1/50 = 0,02 (330916)
Number Description
330915 500 mm jaw 90 mm
330916 500 mm jaw 90 mm
330917 500 mm jaw 150 mm
330918 1000 mm jaw 120 mm
330919 1000 mm jaw 150 mm
330920 1500 mm jaw 200 mm
330921 2000 mm jaw 200 mm
All DIN control calipers can be supplied optional (additional cost) with a certificate.
The DIN version will be certified according to VDI/VDE/DGQ 2618 norm.
Works standard control calipers can be certified according to the works standard.
Calibration will be done external and will extend lead time with approx. one week.
00-08.3
Digital control caliper with fine adjustment.
Without points. Accuracy 0,03 mm.
Made of stainless steel, hardened.
With fine adjustment and screw lock.
Works standard. In transport box.
Reading 0,01 mm + 0,0005"
On/Off function, MM/INCH unit.
HOLD Function. Data exit RB 5
Battery 3V CR 2032 (number 7702469)
Number Description
330930 200 mm jaw 75 mm
330931 300 mm jaw 90 mm
Digital control caliper with fine adjustment.
With points. Accuracy 0,03 mm.
Made of stainless steel, hardened.
With fine adjustment and screw lock.
Works standard. In transport box.
Reading 0,01 mm + 0,0005"
On/Off function, MM/INCH unit.
HOLD Function. Data exit RB 5
Battery 3V CR 2032 (number 7702469)
Number Description
330935 300 mm jaw 60 / 38 mm
330936 300 mm jaw 90 / 45 mm
Digital control caliper with fine adjustment IP66
With magnetic measuring system. Fine adjustment.
IP 66 protection. Water and dust proof.
Made of stainless steel, hardened.
Works standard. In transport box.
Reading 0,01 mm + 0,0005"
On/Off function, MM/INCH unit.
HOLD Function. PRESET function.
Battery 3V CR 2032 (number 7702469)
IMPORTANT NOTE:
This caliper need to be kept away from strong
magnets oor magnetic areas!!
Number Description Accuracy
330940 300 mm jaw 90 / 45 mm 0,05 mm
330941 500 mm jaw 150 / 56 mm 0,05 mm
330942 600 mm jaw 150 / 56 mm 0,06 mm
330943 1000 mm jaw 150 / 67 mm 0,07 mm
Batteries for digital calipers
Number Dimensions
330200 SR 44 Ø11,6 x 5,4 mm 1,5 volt
(V357/V303)
7702471 CR2025 Duracell Ø20 x 2,5mm
3 volt
Depth vernier caliper DIN 862 with fine adjustment
Made of stainless steel.
Scale and nonius satin chrome finish.
In case.
Reading 330950 & 330951 0,02 mm = 1/20
Reading 330953 & 330954 0,05 mm = 1/50
Number Description Base
330950 200 mm 100 mm
330951 300 mm 150 mm
330952 200 mm 100 mm
330953 300 mm 150 mm 00-08.4
Digital depth vernier caliper IP 67
Equiped with a Sylvac-Electronic measuring unit.
IP 67 protection, water and dust proof.
Made of stainless steel, hardened.
Reading 0,01 mm or 0,0005".
On/Off function, MM/INCH unit.
ABS Function. Absolute system.
In plastic case.
Battery 3V CR 2032 (number 7702469)
Number Description Base
330955 150 mm 100 mm
330956 200 mm 100 mm
330957 300 mm 150 mm
Outside micrometer DIN 863
With carbide measuring faces.
Coated frame. Scale chrome finish.
Spindle Ø6,5 mm, thread pitch 0,5 mm.
With ratched. Scale 0,01 mm.
Accuracy according to DIN 863
In protective case.
Number Range C mm
330500 0 - 25 mm 28
330501 25 - 50 mm 38
330502 50 - 75 mm 49
330503 75 - 100 mm 60
330504 100 - 125 mm 73
330505 125 - 150 mm 85
330506 150 - 175 mm 104
330507 175 - 200 mm 117
330508 200 - 225 mm 130
330509 225 - 250 mm 142
330510 250 - 275 mm 155
330511 275 - 300 mm 168
Outside micrometer set DIN 863
As above but packed in wooden case.
Number Range Number
330500S1 0 - 100 mm 4 pcs.
Number Range Number
330504S1 100 - 200 mm 4 pcs.
Number Range Number
330508S1 200 - 300 mm 4 pcs.
Number Range Number
330500S2 0 - 150 mm 6 pcs.
Number Range Number
330504S2 150 - 300 mm 6 pcs.
Number Range Number
330508S2 0 - 300 mm 12 pcs.
00-08.5
Outside micrometer DIN 863
With carbide measuring faces.
Frame metalic coated. Scale chrome finish.
Spindle Ø6,5 mm, thread pitch 0,5 mm.
With ratched. Scale 0,01 mm.
Accuracy according to DIN 863
In protective case.
Number Range C mm
330500C 0 - 25 mm 24
330501C 25 - 50 mm 32
330502C 50 - 75 mm 45
330503C 75 - 100 mm 57
330504C 100 - 125 mm 70
330505C 125 - 150 mm 82
330506C 150 - 175 mm 95
330507C 175 - 200 mm 107
Outside micrometer set DIN 863
As above but packed in wooden case.
Number Range Number
330500CS 0 - 100 mm 4 pcs.
Nummer Meetbereik Aantal
330504CS 0 - 150 mm 6 pcs.
Nummer Meetbereik Aantal
330508CS 100 - 200 mm 4 pcs.
Outside micrometer DIN 863 Anti-magnetic
Anti-magnetic. Ratched with friction timble.
Special hardened composit measuring faces.
Frame chrome finish.
Spindle Ø6,5 mm, thread pitch 0,5 mm.
Scale 0,01 mm.
In protective case.
Number Range C mm
330500NM 0 - 25 mm 24
330501NM 25 - 50 mm 32
Digital outside micrometer IP 54 DIN 863
With auto power Off function.
Frame coated. Steel chrome finish.
Carbide measuring faces.
With ratched adjustment.
Reading 0,001 m, accuracy according to DIN 863
Equiped with zero setting.
In protective case.
On/Off function.
Battery SR44 V357 1,5V (number 330200)
Number Range B mm
330500D 0 - 25 mm 28
330501D 25 - 50 mm 35
330502D 50 - 75 mm 48
330503D 75 - 100 mm 60
00-08.6
Micrometer holder
With adjustable angle.
Central clamp.
Number Description
330540 For micrometers up to 100 mm
Number Description
330541 For micrometers up to 200 mm
Number Description
330542 For micrometers up to 300 mm
Precision inside micrometer DIN 863/1
Hardened spindle.
Satin chrome finish.
Tread lead 0,5 mm. Reading 0,01 mm.
Drum Ø20 mm.
In protective case.
Number Range
330700 25 - 30 mm
330701 30 - 35 mm
330702 35 - 50 mm
330703 50 - 75 mm
330704 75 - 100 mm
330705 100 - 125 mm
330706 125 - 150 mm
330707 150 - 175 mm
330708 175 - 200 mm
330709 200 - 225 mm
330710 225 - 250 mm
330711 250 - 275 mm
330712 275 - 300 mm
Precision inside micrometer setDIN 863/1
As above but in wooden case.
Number Range Number
330715 50 - 150 mm 2 pcs.
330716 50 - 250 mm 3 pcs.
330717 50 - 450 mm 4 pcs.
330718 50 - 850 mm 5 pcs.
330719 50 - 1250 mm 6 pcs.
330720 50 - 1450 mm 6 pcs.
Dial indicator
Metal casing.
Accuracy according to works standard.
With tolerance marks.
Standard stem 8 h6.
Dial face rotable by outer ring.
Accuracy 17µm
Reading 0,01 mm.
In protective case.
Number Range Ring Ø
330540 10 mm 56 mm
00-08.7
Dial indicator with magnetic support-set in box
Magnetic support with fine adjustment.
For dial indicators with a stem of Ø8 mm.
Chromed rods. Total height 281 mm.
Prismatic magnetic base with On/Off
switch. Base M10.
Magnetic holding force 60 kg.
Including dial indicator 330540
Number Description
330650 Dial indicator with magnetic
base. Measuring range 10 mm.
Dial indicator with magnetic support-set in box
Magnetic support with fine adjustment.
With mechanical central clamping.
For dial indicators with a stem of Ø8 mm.
with dovetail guides.
Total height 375 mm.
Prismatic magnetic base with On/Off
switch. Base M8.
Magnetic holding force 80 kg.
Including dial indicator 330540
Number Description
330654 Dial indicator with magnetic
base. Measuring range 10 mm.
Magnetic dial support
Magnetic support with fine adjustment.
For dial indicators with a stem of Ø8 mm.
Chromed rods. Total height 281 mm.
Prismatic magnetic base with On/Off
switch. Base M10.
Magnetic holding force 60 kg.
Number Description
330550 Magnetic dail support 60 kg.
Magnetic dial support
Magnetic support with fine adjustment.
With mechanical central clamping.
For dial indicators with a stem of Ø8 mm.
with dovetail guides.
Total height 375 mm.
Prismatic magnetic base with On/Off
switch. Base M8.
Magnetic holding force 80 kg.
Number Description
330551 Magnetic dail support 80 kg.
Digital dial indicator Ø57 mm.
With digital LCD display.
Reading 0,01 mm or 0,0005".
Standard stem 8 h6.
On/Off function. MM/Inch unit.
Data exit RB 5
Battery 3V CR 2032 (number 7702469)
In plastic case.
Number Description
330543 12,7 mm 20 µm accuracy
330544 25,0 mm 25 µm accuracy
00-08.8
Digital dial indicator ABS - PRESET Function Ø57 mm.
With digital LCD display.
Reading 0,001 mm or 0,00005".
Standard stem 8 h6.
On/Off function. MM/Inch unit.
ABS function. Preset.
Measuring direction reversible.
Battery 3V CR 2032 (number 7702469)
In plastic case.
Number Range
330545 12,5 mm 5 µm accuracy
reading 0,001 mm.
330546 12,5 mm 20 µm accuracy
reading 0,01 mm
330547 25 mm 20 µm accuracy
reading 0,01 mm
Digital dial indicator with rotable display Ø61 mm.
With 270˚ rotable LCD display.
The LCD display is digital and analog as well.
Reading 0,001 mm or 0,00005".
Measuring direction reversible.
Standard stem 8 h6.
On/Off function. MM/Inch unit.
Absolut system. Preset.
Data exit RB 4.1
Battery 3V CR 2032 (number 7702469)
In plastic case.
Number Range
330548 12,5 mm 10 µm accuracy
Digital thickness gauge
LCD display
Rod and disc made of stainless steel.
Frame made of case iron.
Spring closed. Quick snap (yellow button).
Reading 0,01 mm or 0,0005".
On/Off function.
MM/Inch unit.
Battery SR44 V357 1,5V (number 330200)
Number Range
330870 0-12 mm Accuracy 0,02 mm
Digital thickness gauge
LCD display, accuracy 0,04 mm.
Rod and disc made of stainless steel.
Frame made of case iron.
Spring closed. Quick snap (yellow button).
Reading 0,01 mm or 0,0005".
On/Off function.
MM/Inch unit.
Battery SR44 V357 1,5V (number 330200)
Number Range Depth
330871 0-25 mm 25 mm
330872 0-25 mm 50 mm
00-08.9
Internal measuring instrument set 18-160 mm with dial indicator
Internal measuring instruments as set with
satin chrome finish.
Complete with dial indicator 0,01 mm reading.
Repeat accuracy of 0,005 mm.
For use in workshops.
Supplied in box with foam insert.
Measuring rods with hardened steel faces.
Contains: measuring faces 18-35, 35-50 en 50-160 mm.
Hardened measuring points Ø3,5 M3,5, Ø5,3 M6, Ø6
Analog dial indicator 10 mm x 0,01 mm
Number Range
330883 18-160 mm
Internal measuring instrument set 18-160 mm with digital dial indicator
Internal measuring instruments as set with
satin chrome finish.
Complete with dial indicator 0,01 mm reading.
Repeat accuracy of 0,01 mm.
For use in workshops.
Supplied in box with foam insert.
Measuring rods with hardened steel faces.
Contains: measuring faces 18-35, 35-50 en 50-160 mm.
Hardened measuring points Ø3,5 M3,5, Ø5,3 M6, Ø6
Digital dial indicator 10 mm x 0,01 mm.
Number Range
330884 18-160 mm
Bluetooth data transmission device for RB 6
For use in combination with digital calipers with
RB 6 data output.
Connection with PC and a bluetooth device.
Up to 10 meter valid distance.
Data transmission with sound notice.
Battery 3V CR 2032 (number 7702469)
Number Description
330900 Bluetooth RB 6 data transmitter
Digital display for absolute measuring systems with digital data output RB 6
Equiped with a connector RB 6 and Micro-B.
Display in MM/Inch/frac.
Backside with a magnetic block.
Battery 2 x 3V CR 2032 (number 7702469)
Cable approx. 2 meter.
On/Off switch. HOLD function.
PRESET.
Number Description
330901 Digitale display RB 6 output
00-08.10
USB interface for PC connection
Measuring value can be transfered directly with the
USB interface to the PC and saved as text or Excel
chart. Data entry by enter key or foot switch
number (330957).
Supplied including driver.
Number Description
330960 RB 6 interface
Cable length 140 cm.
390961 RB 4 interface
Cable length 200 cm
330962 RB 4.1 interface
Cable length 200 cm.
390963 RB 5 interface
Cable length 245 cm
Accessories for PC connection.
Connection cables for USB interface.
Number Description
330964 Connection cable RB 5
Cable length 100 cm.
330965 Connection cable RB 2
Cable length 40 cm
330966 Connection cable RB 4
Cable length 100 cm.
330967 External switch
Foot switch
Measuring sets
Measuring tool set 4-pieces in solid case
Contains:
1 x Vernier caliper with autolock DIN 862
Nonius 1/20. Length 150 mm (number 330970)
(or lock screw number 330971)
1 x Micrometer 0-25 mm satin chrome.
1 x Bevelled edge 100x70mm DIN 875/1
1 x Steel rule 150 mm/mm reading Inox
In solid case 24,5x12,5x5 cm.
Number Description
330970 Measuring tool set 4-pieces
330971 Measuring tool set 4-pieces
Measuring tool set 6-pieces in solid case
Contains:
1 x Vernier caliper with autolock DIN 862
Nonius 1/20. Length 150 mm (330972)
or digital vernier caliper (330973)
1 x Micrometer 0-25 mm satin chrome.
1 x Bevelled edge 100x70mm DIN 875/1
1 x Steel rule 150 mm/mm reading Inox
1 x Pknife straight edge 100 mm DIN 874/0
1 x Spring divider 150mm with fine adjustment.
In aluminium protective case.
Number Description
330972 Measuring tool set 6-pieces
330973 Measuring tool set 6-pieces
with digital vernier caliper
Other measuring tool sets on request available.
00-08.11