Version 1.1 Effective October 1, 2016 - holdertractors.com · User-friendly Multimatic Digital...

Version 1.1 Effective October 1, 2016

S-Series Attachments Catalogue Holder Tractors Inc.

Page 2 Version 1.1 Updated 1/5/17 Effective October 1, 2016

CONTENTS Contents ................................................................................................................................. 2

Snow plows ............................................................................................................................ 4

Sweepers ................................................................................................................................ 8

Salt and sand spreaders ....................................................................................................... 11

Watering equipment ........................................................................................................... 13

Hydraulic power arm ........................................................................................................... 14

Brine sprayer ........................................................................................................................ 16

Snow blowers ....................................................................................................................... 17

Mowers ................................................................................................................................. 19

Water tanks .......................................................................................................................... 22

Special applications .............................................................................................................. 24

List of tractor options ........................................................................................................... 26



SUPPLEMENTARY NOTES

HOLDER tractors are completely versatile pieces of equipment with a tremendous variety of applications. This Catalogue is intended to cover only those attachments and accessories, which are recommended for use with the tractor by the Manufacture.

Please contact your Regional Sales Manager for price, necessary options and delivery conditions.

The buyer will ensure the operator has been provided all available instructions and the operator has the necessary skill and understanding to operate the equipment.

Holder Tractors Inc. 100 Bay Street Embrun Ontario K0A 1W1 Canada

Toll free: 844.332.3200 Tel. 613.443.3200 Fax 613.443.9600 [email protected] www.holdertractors.com

All images used are for illustrative purposes only.

Individual features may vary depending on the specifications.



SNOW PLOWS

Power Angle Plow PAN-067-01 and PAN-071-01

PAN-067-01 PAN-071-01

Description Trip edge angling snow plow

Four edge angling snow plow

Total width 70” (1775 mm) 74” (1870 mm)

Clearing width 67” (1700 mm) straight

71” (1800 mm) straight

57” (1440 mm) at 32o

60” (1520 mm) at 32o

Height 31.6” (805 mm) 40” (1015 mm)

Weight 340 lb (154 kg) 597 lb (271 kg)

Number of trip sections

3 4

Cutting edge available

rubber/corundum, rubber/steel, Hardox

Standard features - flat-face couplings

- Holder C480/C992 adaptor plate

- warning markers

- rubber snow-deflector

Tractor requirements

CAT I 3-point hitch, 1 set of hydraulic quick couplers, double acting

Made in EU



PAN-060-10

PAN-060-10

Description Trip edge angling snow plow

Total width 60” (1540 mm)

Clearing width 60” (1524 mm)

Angled 53" (1350 mm) at 30°

Height 30" (760 mm)

Weight 490 lbs (222 kg)

Number of trip sections

2 x 30” (762 mm)

Cutting edge Steel

Standard features

- flat-face couplings

- 3-point hitch universal mount

- warning markers

- rubber snow-deflector

Available options

Hardox, rubber cutting edges


CAT I 3-point hitch, 1 set of hydraulic quick couplers, double acting

Made in Canada



Folding V-plow PFO-066-03 and PFO-073-03

PFO-066-03 PFO-073-03

Description Folding V-snow plow – heavy

Total width 66” (1690 mm) straight



Appr. 52” (1310 mm) in V or scoop position


Appr. 59” (1500 mm) in V or scoop position

Height 37.4” (950 mm) – outer height

37.4” (950 mm) – outer height

Weight 485 lb (220 kg) 507 lb (230 kg)

Cutting edge Steel

Standard features - Flat-face couplings - Holder C480/C992 adaptor plate - Warning markers - Rubber snow deflector


CAT II 3-point hitch, 2 sets of hydraulic quick couplers, double acting

Made in EU



PFO-061-01 and PFO-066-01

PFO-061-01 PFO-066-01

Description Hydraulic 5-way snow plow

Total width 60” (1520 mm) 66” (1680 mm)

Clearing width at 30°

52” (1320 mm) 58” (1450 mm)

Height 30” (740 mm)

Weight 473 lbs (215 kg) 540 lbs (245 kg)

Cutting edge material (available)

Steel, hardox, vulkolan

Housing material HQWRS

Moldboard thickness

10 Ga

Standard features - 3-point mount - Flat face hydraulic couplers - Steel cutting edges

Available options Extra lights, warning flags, castor wheels

Tractor requirements CAT I 3-point hitch, 2 sets of hydraulic quick couplers

Made in Canada



SWEEPERS

Front sweeper SCD-059-01

Description Hydraulic sweeper, centre driven



63” (1600 mm) at 32°

Turning angle (L/R) 32°

Oscillation 18°

Transport height 41” (1050 mm)

Brush diameter 23.6” (600 mm)

Weight 529 lb (240 kg)

Torque to the shaft 479 lb*f (650 Nm)

Brush material polypropylene

Standard features - Flat-face couplings - Holder C480/C992 adaptor plate - Adjustable broom cover - Castor wheel

Available options Wet-kit: spray nozzles, electrical pump (regular water tank is required)

Tractor requirements CAT I/II 3-point hitch, 1 set of hydraulic quick couplers, double acting; high-flow pump (10 gpm (40 l/min) is required)

Made in EU



PTO driven sweeper SPT-060-01 and SPT-072-01

SPT-060-01 SPT-072-01

Description PTO driven sweeper without wet-kit

Drive assembly Side drive via gearbox and chain

Total width 60” (1520 mm) 72” (1830 mm)

Clearing width straight

60” (1520 mm) 72” (1830 mm)

Clearing width at 30° 53” (1350 mm) 64” (1630 mm)

Overall height 38” (970 mm)

Weight 780 lb (353 kg) 860 lb (390 kg)

Brush diameter 32" (810 mm)

Brush RPM 135

Brush material Poly / Wire

Housing material Stainless steel

Power requirements 30KW/40HP - 70KW/93HP

Standard features 4 storage legs

Available options Wet-kit (spray bar with electric pump) SWK-060-01 and SWK-072-01– regular water tank required; hydraulic drive (SHY-060-01 and SHY-072-01)

Tractor requirements CAT I/II 3-point hitch; 2 sets of hydraulic quick couplings; double acting; 1 3/8" - 6 Spline PTO shaft 540 RPM

Made in Canada



Front sweeper with attachable pick-up container SPU-063-01

Description Hydraulic sweeper with pick-up, side driven

Total width 70.1” (1800 mm)

Clearing width 63” (1600 mm) straight position with a pick-up container

45” (1150 mm) at 32° without a pick-up container

Turning angle (L/R) 32°

Height 38” (860 mm) – working position

51” (1305 mm) – transport position

Brush diameter 23.6” (600 mm)

Weight 440 lb (200 kg) – base sweeper

738 lb (335 kg) – max weight with all options

Brush material polypropylene

Standard features Broom with attached pick-up bucket, flat-face couplings, Holder C480/C992 adaptor plate, castor wheel

Available options Wet-kit on the basic sweeper and/or in the pick-up container: spray nozzles, electrical pump (regular water tank is required)

Tractor requirements CAT I/II 3-point hitch, 2 sets of hydraulic quick couplers, double acting; high-flow pump (10 gpm (40 l/min) is required); counterweight

Made in EU



SALT AND SAND SPREADERS

Rear mounted drop sander SAD-050-01 and DBO-100-02 and dump body

DBO-100-02 SAD-050-01

Description Dump body Hydraulically driven drop sander

Volume 1 cu yard 1/2 cu yard

Dimensions 64” x 42” x 22.5” (1626 x 1067 x 570 mm)

16” depth

40”x30.5”x15” (1020x770x381 mm)

Weight 295 lb (134 kg) 270 lb (122 kg)

Spreading width 40” (1016 mm)

Housing material HQWRS HQWRS

De-icing material type

Sand, salt, mix

Standard features Removable tailgate Flat-face couplings, stainless steel cams on the roll shaft,; LED brake, reverse and signal lights

Available options Stainless steel – upon request

Stainless steel – upon request;

Support stand (set of 3) – DSS-000-01


Over-engine platform Rear bumper, flow divider 1

Made in Canada



Broadcast spreader SAB-130-01

Description Hydraulically driven broadcast spreader, over-the-engine mount

Hopper volume 1.3 cu yard (1 m³)

Delivery method Auger with agitator

Spreading method Adjustable spinner disc

Spreading width 3-19 foot (1-8 m)

Spreading dosage 5-250 g / m² with 5 g /m² step

Spinner disc Stainless steel, Ø 25” (647 mm)

Material type Sand, salt, grit

Mounted height (depending on the tires)

+/- 76” (1930 mm)

Empty weight 992 lb (450 kg)

Control box

User-friendly Multimatic Digital control box with 4.3” colour LED display:

- material selection

- dosage

- spreading width

- hours counter

- material and distance counter

- daily logs

- service functions

Standard features - dry spreading system


- sub-frame for Holder C480/C992

- stainless steel spinner disc and agitator

- mesh screen

- foldable tarpaulin cover

- rear splash guard

- support legs with castor wheels

- work light

Available options Pre-wet module, additional beacon light, rear camera

Tractor requirements Over-engine platform, high-flow pump (min. 13 gpm (50 l/min) is required)

Made in EU



WATERING EQUIPMENT

Front spray bar SPB-070-01 (attachment only)

Watering arm WAR-161-01 (attachment only)

Description Hydraulic swiveling spray bar


Working width 51” (1300 mm) @ 30°; hydraulic angling left/right

Bar made of Stainless steel


Standard features - front adapter plate C480/C992


- support leg

Available options Spray guard

Tractor requirements CAT I 3-point hitch, 1 set of hydraulic quick couplings, double acting

Other requirements Water tank system WTS-171-02 or WTS-171-03

Made in EU

Working height max. 161” (4100 mm)

Swivel range left/right

250° (125° left / right) main arm: 55° tilt; second arm: 150° swivel

Spraying head angling

170° (electrically adjustable)

Material Main and second arm – stainless steel

Standard features - adapter plate C480/C992

- standard Holder joystick controls

- flat sealing couplings

- electrical angling of the spraying head

Available options FMC Multimatic control box with joystick (instead of the regular Holder joystick control) – WAR-161-02

Tractor requirements CAT I 3-point hitch, 2 sets of hydraulic quick couplings, double acting

Other requirements Water tank system WTS-171-01 or WTS-171-02

Made in EU



HYDRAULIC POWER ARM

Power arm PAR-157-01 – w/o working tools

Working tools for PAR-157-01

Item No HMF-039-01

Description Hydraulic flail mower head 39.5” (1000 mm); suitable for grass / brushwood up to 1” (20 mm); 32 Y-flails

Item No HCH-059-01 HCH-082-01

Description Hedge cutter 59” (1500 mm) for cutting branches up to 1¼“ (30 mm)

Hedge cutter 82” (2083 mm) for cutting branches up to 1¼“(30 mm)

Description Multifunctional hydraulic power arm for various working tools

Reach to the side 157” (3988 mm) incl. flail head – from the center of the tractor

Sliding frame 65” (1650 mm)

Effective sliding R/L 49” (1250 mm)


Standard features Holder mounting group, flat sealing couplings, quick change system for working tools, hydraulic anti-crash protection, hydraulic weight transfer

Available options FMC Multimatic control box with digital mouse

Tractor requirements CAT I/II 3-point hitch; 3 sets of quick hydraulic couplings, double acting; leak oil line; high flow pump, counterweight, slope tires.

Recommended tractor options

SDS - drive comfort system

Other requirements Working tools (sold separately)

Made in EU



Item No BCH-053-01

Description Branch cutter 53” (1400 mm) for cutting up to 4” (100 mm)

Item No WBH-027-01

Description Weed brush 27.5” (700 mm) for removing weeds and dirt

Item No PWH-019-01

Description Post washing brush system 20.5” (520 mm) brush length, 15.75” (400 mm) brush diameter; spray nozzles and water pump included

Other requirements Regular water tank

Item No EAH-028-01

Description Earth auger 29.5” (745 mm) long; 4.75” – 8” (120 – 200 mm)

Item No DDH-020-01

Description Ditch digger 19” (480 mm) diameter

Item No SGH-021-01

Description Stump grinder 22.75” (580 mm) diameter



BRINE SPRAYER

Brine sprayer BSP-317-01

Total volume 317 gal (1200 l)

Number of tanks 2 x 158.5 gal (2 x 600 l)

Material UV-and shock resistant PE

Dimensions 81” x 49” x 37” (2050 x 1250 x 950 mm)

Height mounted (depending on tires)

+/- 80” (2030 mm)

Spraying method Jet nozzles

Spraying width 51” – 130” (1300 – 3300 mm)

Control box

User-friendly MULTIMATIC Digital control box with 4.3” colour LED display:

- dosage

- spraying width

- hours counter

- material and distance counter

- daily logs

- service functions

Standard features - 60 ft (18 m) hose reel with hand lance


- sub-frame for Holder C480/C992

- support legs

- work light

Available options Side jet nozzles – up to 196” (5 m) spraying width; additional beacon light, rear camera, filling sensor

Tractor requirements Over-engine platform, high-flow pump (min. 13 gpm (50 l/min) is required)

Made in EU



SNOW BLOWERS

Snow blowers BBX-050-01 and BBX-060-01

BBX-050-01 BBX-060-01

Description PTO driven box snow blower, dual auger type

Drive assembly Side drive via gearbox and chain

Total width 50” (1270 mm) 60” (1524 mm)

Clearing width 50” (1270 mm) 60” (1524 mm)

Overall height 76" (193 cm)

Housing height 39” (990 mm)

Weight 880 lb (399 kg) 1095 lbs / 496 Kg

Auger diameter 14” (355 mm)

Impeller diameter 24” (610 mm)

# of impeller blades 3 (optional 4)

Overload protection Shear pins

Chute Hydraulic with hydraulic flap

Chute rotation 270°

Power requirements 30KW/40HP - 70KW/93HP

60KW/80HP - 70KW/93HP

Standard features Ice-breaker auger tips, HQWRS cutting edges and skid shoes; flat face couplings

Available options 60” (1524 mm) truck loading chute extension (BCE-060-01); additional lights

Tractor requirements CAT I/II 3-point hitch; 2 sets of hydraulic quick couplings; double acting; 1 3/8" - 6 Spline PTO shaft 540 RPM; counterweight

Made in Canada



Snow blowers BCD-055-03, BCD-059-02 and BCD-070-01

BCD-055-03 BCD-059-02 BCD-070-01

Description PTO driven ribbon style snow blower

Drive assembly Direct drive via gearbox

Total width 55” (1440 mm) 59” (1500 mm) 70” (1800 mm)

Clearing width 55” (1438 mm) 59” (1499 mm) 70” (1778 mm)

Overall height 82.6” (2100 mm)

Housing height 35.4” (900 mm)

Weight 1036 lb (470 kg) 1091 lb (495 kg) 1157 lb (525 kg)

Auger diameter 25.6” (650 mm) 29.5” (750 mm) 29.5” (750 mm)

Impeller diameter 23.6” (600 mm)

# of impeller blades 5

Overload protection

A cam-type cut-out clutch between axle gear and blower wheel; PTO shear pin

Chute Hydraulic with 2 hydraulic flaps

Chute rotation 210°

Power requirements

33KW/45HP - 95KW/130HP

Standard features Wear-resistant exchangeable plate insert in the impeller housing; cutting edge and skid shoes; flat face couplings

Available options Hydraulic top-link;

39” (1000 mm) chute extension (BCE-039-01)

Truck loading chute with double flap (TLC-039-01)


CAT II 3-point hitch; 2 sets of hydraulic quick couplings; double acting; 1 3/8" - 6 Spline PTO shaft 540 RPM; counterweight

Made in EU



MOWERS

Tri-deck mowers MTD-136-02 and MTD-159-02

MTD-136-02 MTD-159-02

Description Hydraulically driven tri-deck rotary mower

Total width 138” (3515 mm) 160” (4070 mm)

Transport width 69“ (1750 mm) 79“ (2000 mm)

Largest length 63“ (1600 mm)

Largest height 24“ (600 mm)

Transport height 47“ (1200 mm) 57“ (1450 mm)

Cutting width 136“ (3470 mm) 159“ (4025 mm)

Cutting height 0.8”-3.15” (20-80 mm)

Number of rotors 7 7

Number of blades 7 7

Power requirements 37.5 KW / 51 HP 41.5 KW / 56 HP

Wheels 8 pcs. air rubber

Weight 1146 lb (520 kg) 1323 lb (600 kg)

Hydraulic flow required 21 gallon @ 3626 PSI

(80 l/min @ 250 bar)

24 gallon @ 4351 PSI (90 l/min @ 300 bar)

Standard features Automatic shut-off of the side wings when raised more than 15” (400 mm); cut 10° below level and 15° above level (when floated); hydraulic transmission via direct drive; mechanical tilt up

Available options Hydraulic tilt up

Tractor requirements CAT I/II 3-point hitch, 2 sets of hydraulic quick couplings, double acting with float mode; high-flow pump; counterweight, turf tires

Made in EU



Rotary mowers MRT-090-01 and MRT-110-01

MRT-090-01 MRT-110-01

Description PTO driven rotary mower deck

Total width 90” (2286 mm) 110” (2794 mm)

Cutting width 60” (1524 mm) 72” (1829 mm)

Cutting height 1”-5” (25-127 mm) adjustable

Number of blades 3

Gearbox Spiral gears with cooling fins

PTO RPM 540

Rotor RPM 3210 2605

Blade tip speed (ft/min)

16,929 16,732

Weight 534 lb (242 kg) 584 lb (265 kg)

Power requirements 37 kw / 50 hp

Wheels and tires 4 wheels with 11” x 4” 4 ply air tires

Standard features Safety chain shield; heavy duty shielded PTO shaft; floating 3-point linkage

Available options Front antiscalping roller, mulching kit

Tractor requirements CAT I/II 3-point hitch, 1 3/8” - 6 Spline PTO shaft 540 RPM; counterweight, turf tires

Made in USA



Flail mowers MFL-072-01 and MFL-088-02

MFL-072-02 MFL-088-02

Description PTO driven flail mower

Total width 85” (2159 mm) 99” (2515 mm)

Cutting width 72” (1829 mm) 88” (2235 mm)

Cutting height ¾” - 6” (19-152 mm) adjustable

Number of blades 80 96

Driveline With overrunning clutch

PTO RPM 540

Rotor RPM 2080

Blade tip speed (ft/min)

8464

Weight 1153 lb (523 kg) 1296 lb (588 kg)

Power requirements 40-80 hp (30-60 kW)

Standard features Hammer type blades; belt shield fender; floating top link.

Available options Fine cut, dethatching, reverse Y blades

Tractor requirements CAT I/II 3-point hitch, 1 3/8" (35 mm) - 6 Spline PTO shaft 540 RPM; counterweight, turf tires.

Made in USA



WATER TANKS

Water tanks WTA-150-01 and WTA-250-01

WTA-150-01 WTA-250-01

Total volume 150 US gal (568 l) 250 US gal (946 l)

Baffles No Yes

Material PE PE


64” x 46” x 32.5” (1626 x 1168 x 825.5 mm)

Mounting options In the dump body (frame required)

On the platform only On the platform

(frame required)

Standard features Hose connections Hose connections, frame for platform mount

Frame options WTF-100-01 (dump body mount)

WTF-100-02 (platform mount)

Designation Front sweepers, post washing brush

Tractor requirements Over-engine platform or dump body

Over-engine platform

Made in Canada



Water tank system WTS-317-0x

WTS-317-01 WTS-317-02 WTS-317-03

Total volume 317 gallon (1200 l)

Number of tanks 2 x 158.5 gal (2 x 600 l)

Material UV-and shock resistant PE


Height mounted (depending on tires)

+/- 80” (2030 mm)

Pump assembly Low pressure pump 34 gpm@ 87 PSI

Mid-pressure pump 26 gpm@ 725 PSI

High pressure pump 24 gpm@ 2175 PSI

Standard features Holder C480/C992 sub-frame, flat sealing couplings, support legs with castor wheels, hose connection between the pump and attachment

Available options Filling sensor, hose reel with flat jet nozzle (high pressure) or water pistol (low pressure)

Designation WAR-161-01 only

SPB-070-01 and /or WAR-161-01

SPB-070-01 only

Tractor requirements Over-engine platform; Hydraulic flow-divider 1 (4 gpm (15 l/min) is required)

Over-engine platform; High flow pump (10.5 gpm (40 l/min) is required)

Over-engine platform; High flow pump (21 gpm (80 l/min) is required)

Made in EU



SPECIAL APPLICATIONS

Front loader LOA-034-01

Description Hydraulic front loader with a bucket and forks

Total width of the bucket 39.3” (1000 mm)

Total volume of the bucket 0.34 cu yard (260 l)

Working Height 90” (2286 mm)

Length of the forks 39.3” (1000 mm)

Max. weight capacity 370 lb (167 kg)

Standard features Front loader with a bucket; manually adjustable forks

Tractor requirements CAT I/II 3 point hitch; 2 sets of hydraulic quick couplings; double acting; slope tires

Made in EU



Turbine air blower BDS-033-01

Counterweight CTW-450-01 and CTW-900-01

Description PTO driven cold air turbine blower

Total length 63” (1600 mm) (top link to end of nozzle)


Total height 24” (610 mm) (includes anti-scalping roller)


Turbine speed 3750 RPM

Standard features Anti-scalping roller, leaf blower nozzle

Available options Other nozzles available

Tractor requirements CAT I/II 3-point hitch, 1 3/8" (35 mm) - 6 Spline PTO shaft 540 RPM

Made in USA

Description Rear counterweight

Weight 450 lbs (204 kg) 900 lb (408 kg)

Tractor requirements Rear bumper, top-link slide

Made in Canada



List of tractor options

Description Item Number

Dual drive 153229

CAT I/II 3-point hitch 156109

Rear 3-point hitch Cat I-II 156110

Rear PTO (1000 RPM) 156157

Flow divider 1 (0-6.6 US gpm) (0-25 l/min) 156111

Tandem pump combo (0-13 GPM) 156112 + 156113

High-flow pump (0-31 US gpm) (0-120 l/min) includes Coding box 158057+158058+148873

Hydraulic set 2 (3 sets of hydraulic quick couplings, double acting) 152975

Turf tire with rim 31x13.5-15 4131-8

Slope tire with rim 31x13.5-15 4131-7

Wide fenders for turf or slope tires (set) 153132

Date post:	28-Aug-2018
Category:	Documents
Upload:	truongnguyet
View:	218 times
Download:	0 times

Version 1.1 Effective October 1, 2016 - holdertractors.com · User-friendly Multimatic Digital...

Documents