+ All Categories
Home > Documents > VERSIONS EFFECTIVE DATE - maxquality.info testing protocol update 25 Feb 16... · versions...

VERSIONS EFFECTIVE DATE - maxquality.info testing protocol update 25 Feb 16... · versions...

Date post: 03-Jul-2018
Category:
Upload: lythien
View: 216 times
Download: 0 times
Share this document with a friend
58
Transcript

VERSIONS EFFECTIVE DATE AMENDMENT (based on LMG corporate technical protocol)

MXTS/QTY/1.5/2012

Based on LMG/CORP/1.1/2012December-12 INITIAL RELEASE

Tensile strength requirement has been removed from all babies / children categories upto 12

years

Tensile strength requirement for Adult Denim category (above 12 years) has been revised.

Formaldehyde requirement of less than 20 ppm has been enforced for all product categories

catering upto 12 years age group

Total lead content of less than 90 ppm has been enforced for all accessible scrapable surface

coatings

For Blended fabrics (including Elastane) the acceptable tolerance limit is revised to +/- 3%

GPT 15 (Underwear) applicable for 100% Cotton content only. For other blends, GPT 16 is

applicable

GPT 18 (Socks) applicable for 95% Cotton or Nylon content only. For other blends, GPT 19 is

applicable

GPT 23 (Swimwear) Color fastness to chlorinated water is under optional test now

Azo Dyes testing is removed from mandatory list

GPT 2,3,4 (Woven garments) Product performance test (Seam slippage, Seam strength, Stretch

& Recovery ) added.

GPT 5,6,7 (Knitted garments) Product performance test (Stretch & Recovery) added.

GPT 8,9,10 (Denim garments) Product performance test (Seam strength) added.

GPT 11 (Additional color garments pkg ) Product performance test added.

GPT 15,16,17 (Underwear) Product performance test (Stretch & Recovery) added.

GPT 24,25 (Swimwear) Product performance test (Stretch & Recovery for Weft knits and

Tension & Elongation for Warp knits) added.

GPT 11 (Additional color garments pkg ) Seam strength & Seam slippage test removed

GPT 17 (Additional color for Underwear) Stretch & Recovery test removed

GPT 25 (Swimwear) Stretch & Recovery for Weft knits and Tension & Elongation for Warp

knits removed

GPT 32 (Additional color garments pkg only for Denim) added in testing protocol

FPT 5, GPT 8, 9, 32 - Tensile strength requirements applicable only for 100% Cotton (Blend

composition are exempted from test of tensile)

Garment odour/ smell test is added in all GPT's

GPT 15, 17, 18, 19, 28, 30, 31 - Added appearance after wash test

MXTS/QTY/1.7/2014

Based on LMG/CORP/1.3/2014October-14

February-16MXTS/QTY/2.0/2016

Based on LMG/CORP/1.4/2016

REVISION RECORD

MXTS/QTY/1.8/2015

Based on LMG/CORP/1.3/2014June-15

MXTS/QTY/1.9/2015

Based on LMG/CORP/1.3/2014August-15

MXTS/QTY/1.6/2013

Based on LMG/CORP/1.2/2013August-13

1 of 57

SR.NO. TESTING PACKAGES

FPT 1 FULL PACKAGE FOR WOVEN FABRIC 65:35 POLY:COTTON & 55:45 POLY:WOOL

FPT 2 WOVEN FABRIC PACKAGE 1ST COLOR ( PACK - A )

FPT 3 WOVEN FABRIC PACKAGE 1ST COLOR ( PACK - B )

FPT 4 WOVEN FABRIC PACKAGE ADDITIONAL COLOR

FPT 5 FULL PACKAGE FOR DENIM FABRIC

FPT 6 KNIT FABRIC PACKAGE 1ST COLOR

FPT 7 KNIT FABRIC PACKAGE ADDITIONAL COLOR

GPT 1 READYMADE APPAREL PACKAGE 65:35 POLY:COTTON & 55:45 POLY:WOOL

GPT 2 WOVEN READYMADE APPARELS PACKAGE ADULT

GPT 3 WOVEN READYMADE APPARELS PACKAGE 8 - 14 YEARS

GPT 4 WOVEN READYMADE APPARELS PACKAGE 0 - 8 YEARS

GPT 5 KNITTED READYMADE APPARELS PACKAGE ADULT

GPT 6 KNITTED READYMADE APPARELS PACKAGE 8 - 14 YEARS

GPT 7 KNITTED READYMADE APPARELS PACKAGE 0 - 8 YEARS

GPT 8 READYMADE DENIM APPARELS PACKAGE ADULT

GPT 9 READYMADE DENIM APPARELS PACKAGE 8 - 14 YEARS

GPT 10 READYMADE DENIM APPARELS PACKAGE 0 - 8 YEARS

GPT 11 ADDITIONAL COLOUR PACK FOR GARMENTS

GPT 12 READYMADE APPARELS PACKAGE (100 % SILK)

GPT 13 FULL PACKAGE FOR BATHROBE, DRESSING GOWN, NEGLIGEE

GPT 14 FULL PACKAGE FOR NECKTIE & SCARF

GPT 15 FULL PACKAGE FOR UNDERWEAR & INTEMATE APPARELS ( 100% Cotton)

GPT 16 FULL PACKAGE FOR UNDERWEAR & INTEMATE APPARELS ( Other than 100% Cotton)

GPT 17 ADDITIONAL COLOUR PACK FOR UNDERWEAR

GPT 18 FULL PACKAGE FOR SOCKS (only men's socks with minimum 95% cotton OR Nylon fibers)

GPT 19 FULL PACKAGE FOR SOCKS (Others)

GPT 20 FULL PACKAGE FOR SWEATER ADULT

GPT 21 FULL PACKAGE FOR SWEATER 8 - 14 YEARS

MAX PROTOCOL LIST

2 of 57

MAX PROTOCOL LISTGPT 22 FULL PACKAGE FOR SWEATER 0 - 8 YEARS

GPT 23 ADDITIONAL COLOUR PACK FOR SWEATER

GPT 24 FULL PACKAGE FOR SWIMWEAR

GPT 25 ADDITIONAL COLOUR PACK FOR SWIMWEAR

GPT 26 FULL PACKAGE FOR PU GARMENT

GPT 27 FULL PACKAGE FOR ARTIFICIAL FAKE FUR

GPT 28 FULL PACKAGE FOR HATS, HAND GLOVES & CAP ETC.

GPT 29 FULL PACKAGE FOR BAG

GPT 30 FULL PACKAGE FOR LINING

GPT 31 FULL PACKAGE FOR OTHER APPARELS OR TEXTILE ACCESSORIES

GPT 32 ADDITIONAL COLOUR PACK FOR GARMENT (ONLY DENIM)

A OPTIONAL TESTS BASED ON CASE BASIS (ON BUYERS DESCRITION)

B GENERAL NOTE & TESTING INSTRUCTION

C LABORATORY RESPONSIBILITIES

D VENDOR RESPONSIBILITIES

E EGYPT TEST REQUIRMENTS

F GENERAL CERTIFICATE OF CONFORMITY

G OPTIONAL TEST BASED ON EGYPT REQUIREMENT

H AZO FREE CERTIFICATE

I WASHING INSTRUCTIONS

J NOTES

3 of 57

Sr.

No.Test Description 测试项目 Method / Standard

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

Color fastness To

Washing or水洗色牢度

AATCC 61:2010 / SASO

170:2005 / SASO 2329:2005

Fabric Type Weight (gms)

65% Poly / 35% Cotton

Type A :

Type B :

Type C :

Requirements

FABRIC PACKAGE

FPT 1

FULL PACKAGE FOR WOVEN FABRIC PACKAGE 65% POLYSTER / 35% COTTON AND 55% POLY / 45%WOOL

4 Tensile Strength 拉伸强度

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

ISO 13934 – 2

( 1 inch grab test)

Warp (kg)

3 Mass per unit area 克重 BS EN 12127

• For 55% Polyester / 45% Wool Woven plain fabric

Type A : 168 gsm

Type B : 197 +/- 7.5 gsm

Type C : 224 +/- 7.5 gsm

• For 65% Polyester / 35% Cotton fabric ≥ 85gsm

Others report actual or +/- 5% from claim

2• Change in Color: 4 (min.)

• Color Staining: 4 ( min.)Color fastness To Dry

cleaning干洗色牢度

ISO 105 D01:2010 / SASO

2324:2005

For 55% Polyester /

45%Wool woven plain

fabric

3.50 3.20

4.50 3.80

4.50 3.80

Weft (kg)

40.0 20.0

4 of 57

Sr.

No.Test Description 测试项目 Method / Standard

1 Fiber Composition成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

Color fastness To

Washing or

水洗色牢度 AATCC 61:2010 / SASO

170:2005 / SASO 2329:2005

3

Color fastness to

Rubbing (Except White,

Ivory & Ecru color)

摩擦色牢度(除白色、象牙色&米

白色)

ISO 105 X 12

4 Count 纱支 ISO 7211 - 5

5 Construction 织物密度 ISO 7211 - 2

6 Mass Per Unit Area 克重 ISO 3801

FABRIC PACKAGE

WOVEN FABRIC PACKAGE 1ST COLOR ( PACK - A )

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing

blends also)

• Light color – Dry 4, Wet 3-4(min)

• Dark colors- Dry 3-4, wet 3(min)

• For pigment prints / indigo dyed products: Dry -3, Wet

2-3 (min)

FPT 2

• +/- 2 units

• +/- 5% from specified

2• Change in Color: 4 (min.)

• Color Staining: 4 ( min.)Color fastness To Dry

cleaning

ISO 105 D01:2010 / SASO

2324:2005

干洗色牢度

• +/- 2 units

5 of 57

Sr.

No.Test Description 测试项目 Method / Standard

1 Fiber Composition成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

Color fastness To

Washing or

水洗色牢度 AATCC 61:2010 / SASO

170:2005 / SASO 2329:2005

Color fastness To Dry

cleaning

干洗色牢度 ISO 105 D01:2010 /

SASO 2324:2005

3

Color fastness to

Rubbing (Except White,

Ivory & Ecru color)

摩擦色牢度(除白色、象牙色&

米白色)

ISO 105 X 12

4 Count 纱支 ISO 7211 - 5

5 Construction 织物密度 ISO 7211 - 2

6 Mass Per Unit Area 克重 ISO 3801

Primary

Fabric

Weight

(gms)

≤ 90

90-120

120-150

150-180

180-240

240-300

> 300

Primary

Fabric

Type

Primary

fabric

Weight oz/

yd2 & gms

≤ 90

90-120

120-150

150-180

180-240

240-300

> 300

≤ 80

80-140

140-200

200-230

230-250

250-270

> 270

FABRIC PACKAGE

1000

1200

All pile

fabric

(Corduroy,

Velveteen,

Velvet &

Terry),

Flannel &

Seersucker

550

25 18

32 22

600

550

400

1000

1200

1300 1100

1350 1200

1100

9 Tear Strength 撕裂强度 ISO 13937-part 1

Warp (gms) Weft (gms)

900 800

1000 900

600

400

1500 1150

680 590

770 680

Other

wovens

(except

55:45

polyester :

wool &

65:35

polyester :

800

1000

800

• +/- 2 units

• +/- 2 units

• +/- 5% from specified

7

*Appearance after Wash

( After 3 wash or 1 dry

cleaning)

洗后外观(3次洗

后或1次干洗)

AATCC 135 / 150 OR

Commercial Dry cleaning• Satisfactory (Must follow the general requirements

8 Tensile Strength 拉伸强度

ISO 13934 – 2

( 1 inch grab test)

Warp (kg) Weft (kg)

(Except for

55:45

polyester :

wool &

65:35

polyester :

cotton

blends)

7 4.5

12 8

16 9

18 11

20

2• Change in Color: 4 (min.)

• Color Staining: 4 ( min.)

• Light color – Dry 4, Wet 3-4(min)

• Dark colors- Dry 3-4, wet 3(min)

• For pigment prints / indigo dyed products: Dry -3, Wet

2-3 (min)

FPT 3

WOVEN FABRIC PACKAGE 1ST COLOR ( PACK - B )

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing

blends also)

14

6 of 57

FABRIC PACKAGE

FPT 3

Fabric

Weight in

gms

< 80

80-140

140-200

200-250

80-140

140-200

200-230

230-270

> 270

≤ 140

> 140

*Applicable for printed colors

7&

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

13

12

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

17

9

7 9

10 13

Seam strength

(Kg)

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having

65 % Viscose Content or more)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash

appearances.

16 21

Skirts &

Dresses :

4 6

Bottoms

(Pyjamas/

Lining /

Trousers

/Formal

skirts)

9ISO 13936-1

Seam slippage

(kg) (For

Seam

7

10

8 11

7

4 6

8 10

Tops &

Blouses

10Seam slippage & Seam

strength接缝滑移&强度

7 of 57

Sr. No. Test Description 测试项目 Method / Standard

Color fastness To

Washing or水洗色牢度

AATCC 61:2010 / SASO

170:2005 / SASO 2329:2005

2

Color fastness to

Rubbing (Except White,

Ivory & Ecru color)

摩擦色牢度(除白色、象牙&米白色)

ISO 105 X 12

FPT 4

FABRIC PACKAGE

干洗色牢度

• Light color – Dry 4, Wet 3-4(min)

• Dark colors- Dry 3-4, wet 3(min)

• For pigment prints / indigo dyed products: Dry -3, Wet 2-3 (min)

WOVEN FABRIC PACKAGE ADDITIONAL COLOR

1• Change in Color: 4 (min.)

• Color Staining: 4 ( min.)Color fastness To Dry

cleaning

ISO 105 D01:2010 / SASO

2324:2005

Requirements

8 of 57

Sr. No. Test Description 测试项目 Method / Standard

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

Color Fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Color Fastness to

Dry clean干洗色牢度 AATCC 132 : 2009

3 Mass Per Unit Area 克重 ISO 3801

Applicability Fabric weight

Only for 100 %

Cotton

271 gm/sqm.

(8 oz/sq yd)

or Less

36 18

FPT 5

2

• Change in color – 4 ( min.)

• Color Staining – 4 ( min.)

4

Tensile Strength

(Not applicable for

children below 14

yrs)

拉伸强度 ASTM D 5034:2009

Warp : kg (min) Weft : kg (min)

FULL PACKAGE FOR DENIM FABRIC

• Non indigo dyed : Color change - 3.5 (min), Color staining : 3 (min)

• Indigo dyed & sulfur black colors. Color

change - 2 min, Color staining - 2 min

FABRIC PACKAGE

± 5 % from specified

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

9 of 57

Sr.

No.Test Description 测试项目 Method / Standard

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

Color fastness To

Washing or水洗色牢度

AATCC 61:2010 /

SASO 170:2005 /

SASO 2329:2005

3

Color fastness to

Rubbing (Except

White, Ivory & Ecru

color)

摩擦色牢度(除白色、象牙色&

米白色)

ISO 105 X 12

5 Mass Per Unit Area 克重 BS EN 12127

*Applicable for printed colors.

6

&

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

FABRIC PACKAGE

KNIT FABRIC PACKAGE 1st COLOR

Requirements

± 5 % from specified

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane

containing blends also)

2

胀破强度

• Light color – Dry 4, Wet 3-4(min)

• Dark colors- Dry 3-4, wet 3(min)

• For pigment prints / indigo dyed products: Dry -

3, Wet 2-3 (min)

4

Color fastness To

Dry cleaning

FPT 6

6

*Appearance after

Wash ( After 3 wash

or 1 dry cleaning)

AATCC 135 / 150 OR

Commercial Dry

cleaning

• Satisfactory (Must follow the general

requirements

洗后外观(3次

洗后或1次干洗

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding,

unsatisfactory after wash appearances.

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant

Blends having 65 % Viscose Content or more)

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

Bursting StrengthISO 13938 - 1

(d = 30.5 mm)

• For ≤ 170 gsm : 30 lb/sq inch

• For ˃ 170 gsm: 40 lb / sq inch

• Change in Color: 4 (min.)

• Color Staining: 4 ( min.)

干洗色牢度ISO 105 D01:2010 /

SASO 2324:2005

10 of 57

Sr. No. Test Description 测试项目 Method / Standard

Color fastness To

Washing or

水洗色牢度 AATCC 61:2010 / SASO

170:2005 / SASO

2329:2005

2

Color fastness to

Rubbing (Except

White, Ivory & Ecru

color)

摩擦色牢度(除白色、象牙色&米白

色)

ISO 105 X 12

• Light color – Dry 4, Wet 3-4(min)

• Dark colors- Dry 3-4, wet 3(min)

• For pigment prints / indigo dyed products: Dry -3, Wet 2-3 (min)

1• Change in Color: 4 (min.)

• Color Staining: 4 ( min.)Color fastness To

Dry cleaning

ISO 105 D01:2010 /

SASO 2324:2005

FPT 7

FABRIC PACKAGE

Requirements

干洗色牢度

KNIT FABRIC PACKAGE ADDITIONAL COLOR

11 of 57

Sr. No. Test Description 测试项目 Method / Standard

2 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

3

Labelling /

Marking(fiber

composition &care

label)

标签(成分标和洗护标)

SASO 1173/1174

Color Fastness to

Washing OR

水洗色牢度 AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Color Fastness to

Dry clean

干洗色牢度 ISO 105 D01:2010

SASO 2324:2005

Fabric Type Weight (gms)

65% Poly / 35% Cotton

Type A :

Type B :

Type C :

Upto 150 gsm

150-200 gsm

200-250 gsm

Above 250 gsm

Upto 150 gsm

150-200 gsm

200-250 gsm

Above 250 gsm

6 pH content PH值 ISO 3071

7

Formaldehyde

content ( For 65:35

Poly Cotton blend

only

甲醛(

仅用于65:35

涤棉混纺)

ISO 14184-1

PRODUCT PERFORMANCE TESTING

Sr. No. Test Description 测试项目 Method / Standard

Appearance after

Wash OR水洗后外观 AATCC 135 / 150

Appearance after

Dry clean干洗后外观 Commercial Dry clean

2Fabric / Garment

odourVisual Check

1 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

GARMENT PACKAGE

40

10

3.84.5

Others report actual or +/- 5% from claim

READYMADE APPAREL PACKAGE 65% POLYSTER / 35% COTTON AND 55% POLY / 45% WOOL

5

3.2

拉伸强度

25

14

Weft (kg)

For 55% Polyester /

45%Wool woven plain

fabric

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

25

• For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

• For 55:45 polyester : wool blend:5.5 – 8.5

• Max. 300 ppm

16

20

9

Tensile StrengthISO 13934 – 2

( 1 inch grab test)

12

• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor

which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant

odour found". 1 per color way

Requirements

13

3.8

Other : (Normal woven

fabric)

3.5

18

克重

23

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

• Change in Color: 4 (min.)

• Color Staining: 4 ( min.)

GPT 1

1

4

• For 55% Polyester / 45% Wool Woven plain fabric

Type A : 168 gsm

Type B : 197 +/- 7.5 gsm

Type C : 224 +/- 7.5 gsm

• Change in color – 4 ( min.)

• Color Staining – 4 ( min.)

BS EN 12127

1&

• Satisfactory (Must comply general requirement)

• Satisfactory (Must comply general requirement)

• For 65% Polyester / 35% Cotton fabric ≥ 85gsm

Warp (kg)

18

Mass per unit area

4.5

• As required

All pile, corduroy, terry,

velvet

15

16

20

20

25

12 of 57

Sr.

No.Test Description 测试项目 Method / Standard

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Color Fastness to

Washing OR

水洗色牢度 AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Color Fastness to

Dry clean

干洗色牢度 ISO 105 D01:2010

SASO 2324:2005

4 pH content PH值 ISO 3071

PRODUCT PERFORMANCE TESTING

Sr.

No.Test Description 测试项目 Method / Standard

Appearance after

Wash OR水洗后外观 AATCC 135 / 150

Appearance after

Dry clean干洗后外观 Commercial Dry clean

Fabric

Weight in

gms

< 80

80-140

140-200

200-250

80-140

140-200

200-230

230-270

> 270

≤ 140

> 140

3For Wovens

Stretch & Recovery

ASTM D 3107

(Modified)

Stretch Direction Only

Number of

Readings

(Total Repetitions)

3 per Color

(Maximum 2

Colors)

4Fabric / Garment

odourVisual Check

1 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

GARMENT PACKAGE

• Satisfactory (Must comply general requirement)

WOVEN READYMADE APPARELS PACKAGE ( ADULT )

Requirements

3

• Change in Color: 4 (min.)

• Color staining: 4 ( min.)

• Change in color – 4 ( min.)

• Color Staining – 4 ( min.)

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

GPT 2

1&

• Satisfactory (Must comply general requirement)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

• As required

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

• For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

• For 55:45 polyester : wool blend:5.5 – 8.5

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

12.0

6.0

7.0 9.0

8.0

Seam strength (Kg)

4.0

• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor

which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant

odour found". 1 per color way

Seam slippage (kg) (For

Seam Opening 6.00 mm)

9.0

10.0

* No Elastane Content: Do not Test.

Elastane Content - 1-5% :

Measure Time Dependent Growth and Recovery using 30 minutes.

Report both Growth and Recovery.

Pass or fail based on growth. Growth: Max. 7% allowed

Elastane Content - Above 5%:

Measure Time Dependent Growth & Recovery using 30 minutes. Report

both Growth & Recovery.

Pass or fail based on growth. Growth: Max. 5%

* If sample as received Fails:

Report original results – Data Only

After one laundering per care instructions –

Repeat Testing and Pass / Fail based on Washed fabric

Pass / Fail based on Each Repetition

Requirements

17.0

4.0 6.0

16.0 21.0

7.0 9.0

8.0 11.0

10.0 13.0

2

For Wovens Seam

slippage & Seam

strength

接缝滑移&强度ISO 13936-1

ISO 13935-2

Tops & Blouses

Bottoms (Pyjamas/

Lining / Trousers

/Formal skirts)

Skirts & Dresses :

Only for loose 7.0

10.0 13.0

13 of 57

Sr. No. Test Description 测试项目 Method / Standard

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Color Fastness to

Washing OR

水洗色牢度 AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Color Fastness to

Dry clean

干洗色牢度

ISO 105 D01:2010

SASO 2324:2005

4 pH content PH值 ISO 3071

5Formaldehyde

content甲醛 ISO 14184-1

PRODUCT PERFORMANCE TESTING

Sr. No. Test Description 测试项目 Method / Standard

Appearance after

Wash OR水洗后外观 AATCC 135 / 150

Appearance after

Dry clean干洗后外观 Commercial Dry clean

Fabric Weight in

gms

< 80

80-140

140-200

200-250

80-140

140-200

200-230

230-270

> 270

≤ 140

> 140

3For Wovens

Stretch & Recovery

ASTM D 3107

(Modified)

Stretch Direction Only

Number of Readings

(Total Repetitions)

3 per Color

(Maximum 2 Colors)

4Fabric / Garment

odourVisual Check

1 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

• Babies & Children ( < 14 years ) : < 20 ppm

GARMENT PACKAGE

• Change in Color: 4 (min.)

• Color Staining: 4 ( min.)

• Satisfactory (Must comply general requirement)

• For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

• For 55:45 polyester : wool blend:5.5 – 8.5

• Change in color – 4 ( min.)

• Color Staining – 4 ( min.)

• Satisfactory (Must comply general requirement)

Requirements

GPT 3

Tops & Blouses

4.0 6.0

9.0

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

3

1 &

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

Requirements

2

For Wovens

Seam slippage &

Seam strength

接缝滑移&强度ISO 13936-1 ISO

13935-2

Seam slippage (kg)

(For Seam Opening

• As required

• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor

which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant

odour found". 1 per color way

Seam strength (Kg)

8.0 11.0

7.0

WOVEN READYMADE APPARELS PACKAGE ( 8 - 14 YEARS AGE GROUP)

10.0

10.0 13.0

8.0

* No Elastane Content: Do not Test.

Elastane Content - 1-5% :

Measure Time Dependent Growth and Recovery using 30 minutes.

Report both Growth and Recovery.

Pass or fail based on growth. Growth: Max. 7% allowed

Elastane Content - Above 5%:

Measure Time Dependent Growth & Recovery using 30 minutes.

Report both Growth & Recovery.

Pass or fail based on growth. Growth: Max. 5%

* If sample as received Fails:

Report original results – Data Only

After one laundering per care instructions –

Repeat Testing and Pass / Fail based on Washed fabric

Pass / Fail based on Each Repetition

21.0

Skirts & Dresses : Only

for loose fitted garment

4.0 6.0

16.0

7.0 9.0

Bottoms (Pyjamas/

Lining / Trousers

/Formal skirts)

7.0

10.0 13.0

12.0 17.0

9.0

14 of 57

Sr. No. Test Description 测试项目 Method / Standard

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Color Fastness to

Washing OR

水洗色牢度 AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Color Fastness to

Dry clean

干洗色牢度 ISO 105 D01:2010

SASO 2324:2005

4 pH content PH值 ISO 3071

5Formaldehyde

content 甲醛 ISO 14184-1

6

Color fastness to

Saliva(Except White,

Ivory & Ecru color)

耐唾液色牢度 DIN 53160 - 1

PRODUCT PERFORMANCE TESTING

Sr. No. Test Description 测试项目 Method / Standard

Appearance after

Wash OR水洗后外观 AATCC 135 / 150

Appearance after

Dry clean干洗后外观 Commercial Dry clean

Fabric Weight in

gms

< 80

80-140

140-200

200-250

80-140

140-200

200-230

230-270

> 270

≤ 140

> 140

3For Wovens

Stretch & Recovery

ASTM D 3107 (Modified)

Stretch Direction Only

Number of Readings

(Total Repetitions)

3 per Color

(Maximum 2 Colors)

4Fabric / Garment

odourVisual Check

• Color staining: 4-5 (min).

• For 0-3 years: 4.0 – 7.5

• For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

• For 55:45 polyester : wool blend:5.5 – 8.5

• Satisfactory (Must comply general requirement)

• Satisfactory (Must comply general requirement)

9.0

10.0 13.0

13.0

4.0 6.0

7.0 9.0

8.0 10.0

GARMENT PACKAGE

WOVEN READYMADE APPARELS PACKAGE ( 0--8 YEARS AGE GROUP)

1 &

Requirements

3

• Change in Color: 4 (min.)

• Color Staining: 4 ( min.)

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

GPT 4

• Babies & Children ( < 14 years ) : < 20 ppm

• Change in color – 4 ( min.)

• Color Staining – 4 ( min.)

Requirements

• As required

ISO 13936-1 ISO

13935-2

Seam slippage (kg)

(For Seam Opening Seam strength (Kg)

Tops & Blouses

• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor

which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant

odour found". 1 per color way

2

For Wovens Seam

slippage & Seam

strength

接缝滑移&强度

* No Elastane Content: Do not Test.

Elastane Content - 1-5% :

Measure Time Dependent Growth and Recovery using 30 minutes.

Report both Growth and Recovery.

Pass or fail based on growth. Growth: Max. 7% allowed

Elastane Content - Above 5%:

Measure Time Dependent Growth & Recovery using 30 minutes.

Report both Growth & Recovery.

Pass or fail based on growth. Growth: Max. 5%

* If sample as received Fails:

Report original results – Data Only

After one laundering per care instructions –

Repeat Testing and Pass / Fail based on Washed fabric

Pass / Fail based on Each Repetition

12.0 17.0

16.0 21.0

Skirts & Dresses : Only

for loose fitted garment

4.0 6.0

7.0

Bottoms (Pyjamas/

Lining / Trousers

/Formal skirts)

7.0 9.0

8.0 11.0

10.0

15 of 57

GARMENT PACKAGE

GPT 4

1 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

16 of 57

Sr.

No.Test Description 测试项目 Method / Standard

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Color Fastness to

Washing OR

水洗色牢度 AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Color Fastness to

Dry clean

干洗色牢度 ISO 105 D01:2010

SASO 2324:2005

4 pH content PH值 ISO 3071

PRODUCT PERFORMANCE TESTING

Sr.

No.Test Description 测试项目 Method / Standard

Appearance after

Wash OR水洗后外观 AATCC 135 / 150

Appearance after

Dry clean干洗后外观 Commercial Dry clean

2Stretch & Recovery

(WEFT KNITS)

ASTM D2594

(Modified)

Number of Readings

(Total Repetitions) 3

per Color

(Maximum 2 Colors)

3Fabric / Garment

odourVisual Check

1 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

GARMENT PACKAGE

• For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

KNITTED READYMADE APPARELS PACKAGE ( ADULT )

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

• Satisfactory (Must comply general requirement)

• Change in color – 4 ( min.)

• Color Staining – 4 ( min.)

Requirements

GPT 5

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

1 &

• As required

• Change in Color: 4 (min.)

• Color Staining: 4 ( min.)

• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor

which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant

odour found". 1 per color way

* No Elastane Content: Do not Test.

* Tested in Course Direction Only

Elastane Content: Less than 10%:

After 2 hour extension, Measure (C) after 60 minutes. Report

both growth and recovery.

Pass or fail based on growth. Growth: Max. 5%

Elastane Content Equal to or greater than 10%:

After 2 hour extension, Measure (B) after 60 seconds. Report

both growth and recovery.

Pass or fail based on recovery. Recovery: Minimum 85%

* If sample as received Fails:

Report original results - Data Only

After one laundering per care instructions -

Repeat Testing and Pass / Fail based on washed fabric

Pass / Fail based on Each Repetition

3

Requirements

• Satisfactory (Must comply general requirement)

17 of 57

Sr. No. Test Description 测试项目 Method / Standard

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Color Fastness to

Washing OR

水洗色牢度 AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Color Fastness to

Dry clean

干洗色牢度 ISO 105 D01:2010

SASO 2324:2005

4 pH content PH值 ISO 3071

5Formaldehyde

content 甲醛 ISO 14184-1

PRODUCT PERFORMANCE TESTING

Sr. No. Test Description 测试项目 Method / Standard

Appearance after

Wash OR水洗外观 AATCC 135 / 150

Appearance after

Dry clean干洗外观 Commercial Dry clean

2Stretch & Recovery

(WEFT KNITS)

ASTM D2594

(Modified)

Number of Readings

(Total Repetitions) 3

per Color

(Maximum 2 Colors)

3Fabric / Garment

odourVisual Check

1 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

GARMENT PACKAGE

• Satisfactory (Must comply general requirement)

• Babies & Children ( < 14 years ) : < 20 ppm

• As required

* No Elastane Content: Do not Test.

* Tested in Course Direction Only

Elastane Content: Less than 10%:

After 2 hour extension, Measure (C) after 60 minutes. Report both

growth and recovery.

Pass or fail based on growth. Growth: Max. 5%

Elastane Content Equal to or greater than 10%:

After 2 hour extension, Measure (B) after 60 seconds. Report both

growth and recovery.

Pass or fail based on recovery. Recovery: Minimum 85%

* If sample as received Fails:

Report original results - Data Only

After one laundering per care instructions -

Repeat Testing and Pass / Fail based on washed fabric

Pass / Fail based on Each Repetition

• For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

• Change in Color: 4 (min.)

• Color Staining: 4 ( min.)

• Change in color – 4 ( min.)

• Color Staining – 4 ( min.)

Requirements

GPT 6

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

KNITTED READYMADE APPARELS PACKAGE ( 8 - 14 YEARS AGE GROUP)

• Satisfactory (Must comply general requirement)

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

1 &

3

Requirements

• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor

which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant

odour found". 1 per color way

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

18 of 57

Sr. No. Test Description 测试项目 Method / Standard

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Color Fastness to

Washing OR

水洗色牢度 AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Color Fastness to

Dry clean

干洗色牢度 ISO 105 D01:2010

SASO 2324:2005

4 pH content PH值 ISO 3071

5Formaldehyde

content 甲醛 ISO 14184-1

6

Color fastness to

Saliva(Except White,

Ivory & Ecru color)

耐唾液色牢度 DIN 53160 - 1

PRODUCT PERFORMANCE TESTING

Sr. No. Test Description 测试项目 Method / Standard

Appearance after

Wash OR水洗后外观 AATCC 135 / 150

Appearance after

Dry clean干洗后外观 Commercial Dry clean

2Stretch & Recovery

(WEFT KNITS)

ASTM D2594

(Modified)

Number of Readings

(Total Repetitions) 3

per Color

(Maximum 2 Colors)

3Fabric / Garment

odourVisual Check

1 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

GARMENT PACKAGE

KNITTED READYMADE APPARELS PACKAGE ( 0--8 YEARS AGE GROUP)

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

GPT 7

1 &

• Satisfactory (Must comply general requirement)

• Satisfactory (Must comply general requirement)

3

• Change in Color: 4 (min.)

• Color Staining: 4 ( min.)

• Change in color – 4 ( min.)

• Color Staining – 4 ( min.)

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

• Color staining: 4-5 (min).

• For 0-3 years: 4.0 – 7.5

• For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

• Babies & Children ( < 14 years ) : < 20 ppm

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

Requirements

* No Elastane Content: Do not Test.

* Tested in Course Direction Only

Elastane Content: Less than 10%:

After 2 hour extension, Measure (C) after 60 minutes. Report both

growth and recovery.

Pass or fail based on growth. Growth: Max. 5%

Elastane Content Equal to or greater than 10%:

After 2 hour extension, Measure (B) after 60 seconds. Report both

growth and recovery.

Pass or fail based on recovery. Recovery: Minimum 85%

* If sample as received Fails:

Report original results - Data Only

After one laundering per care instructions -

Repeat Testing and Pass / Fail based on washed fabric

Pass / Fail based on Each Repetition

• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor

which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant

odour found". 1 per color way

• As required

19 of 57

Sr. No. Test Description 测试项目 Method / Standard

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Color Fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Color Fastness to Dry

clean干洗色牢度 AATCC 132 : 2009

4 pH content PH值 ISO 3071

5 Mass Per Unit Area 克重 ISO 3801

Applicability Fabric weight

Only for 100 % Cotton

271 gm/sqm. (8

oz/sq yd) or

Less

PRODUCT PERFORMANCE TESTING

Sr. No. Test Description 测试项目 Method / Standard

Appearance after

Wash OR水洗外观 AATCC 135 / 150

Appearance after Dry

clean干洗外观 Commercial Dry clean

3Fabric / Garment

odourVisual Check

1 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

5.01 - 8 oz.

• After 24 hours of open package conditioning. Garments shall not have any unpleasant

odor which would prevent customer from purchasing. Report as Unsatisfactory if any

unpleasant odour found". 1 per color way

Upto 5 oz.For Denims Seam

Strength

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

45 lbs.

**** Garments made by Indigo dyed fibers will be considered in Denim category & these will be tested at 40 deg else all will lie in non-indigo category

25 lbs.

30 lbs.

Weight (oz. / sq. yd.)

接缝滑移 ASTM D 1683 For all type of fabrics

Above 8 oz.

Seam Strength : lbs.

2

GARMENT PACKAGE

• Color Change: 4 min.

• Color Staining: 4min

• As required

3

Tensile Strength

• Satisfactory (Must comply general requirement)

ASTM D 5034:2009

18

Weft : kg (min)Warp : kg (min)

6 拉伸强度

Requirements

36

• Satisfactory (Must comply general requirement)

1 &

Requirements

± 5 % from specified

• Non indigo dyed : Color change - 3.5 (min), Color staining : 3 (min) •

Indigo dyed & sulfur black colors. Color change - 2 min, Color staining - 2 min

• For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

GPT 8

READYMADE DENIM APPARELS PACKAGE ( ADULT )

20 of 57

Sr. No. Test Description 测试项目 Method / Standard

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Color Fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Color Fastness to

Dry clean干洗色牢度 AATCC 132 : 2009

4 pH content PH值 ISO 3071

5Formaldehyde

content 甲醛 ISO 14184-1

6 Mass Per Unit Area 克重 ISO 3801

Applicability Fabric weight

Only for 100 %

Cotton

271 gm/sqm.

(8 oz/sq yd)

or Less

PRODUCT PERFORMANCE TESTING

Sr. No. Test Description 测试项目 Method / Standard

Appearance after

Wash OR水洗外观 AATCC 135 / 150

Appearance after

Dry clean干洗外观 Commercial Dry clean

3Fabric / Garment

odourVisual Check

1 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

• Satisfactory (Must comply general requirement)

± 5 % from specified

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

• Satisfactory (Must comply general requirement)

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

**** Garments made by Indigo dyed fibers will be considered in Denim category & these will be tested at 40 deg else all will lie in non-indigo category

For all type of

fabrics

Weight (oz. / sq. yd.) Seam Strength : lbs.

ASTM D 5034:2009

Warp : kg (min) Weft : kg (min)

36 18

• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor

which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant

odour found". 1 per color way

Requirements

2For Denims

Seam Strength

45 lbs.Above 8 oz.

1 &

接缝滑移 ASTM D 1683Upto 5 oz. 25 lbs.

5.01 - 8 oz. 30 lbs.

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

• As required

Requirements

• Non indigo dyed : Color change - 3.5 (min), Color staining : 3 (min)

• Indigo dyed & sulfur black colors. Color change - 2 min, Color staining - 2 min

7 Tensile Strength 拉伸强度

• Babies & Children ( < 14 years ) : < 20 ppm

• For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

GARMENT PACKAGE

READYMADE DENIM APPARELS PACKAGE ( 8 - 14 YEARS AGE GROUP)

3

GPT 9

• Change in color – 4 ( min.)

• Color Staining – 4 ( min.)

21 of 57

Sr. No. Test Description 测试项目 Method / Standard

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Color Fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Color Fastness to Dry

clean干洗色牢度 AATCC 132 : 2009

4 pH content PH值 ISO 3071

5 Formaldehyde content 甲醛 ISO 14184-1

6

Color fastness to

Saliva(Except White,

Ivory & Ecru color)

耐唾液色牢度 DIN 53160 - 1

7 Mass Per Unit Area 克重 ISO 3801

PRODUCT PERFORMANCE TESTING

Sr. No. Test Description 测试项目 Method / Standard

Appearance after Wash

OR水洗外观 AATCC 135 / 150

Appearance after Dry

clean干洗外观 Commercial Dry clean

3 Fabric / Garment odour Visual Check

1 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

GARMENT PACKAGE

READYMADE DENIM APPARELS PACKAGE ( 0 - 8 YEARS AGE GROUP)

1 &

Requirements

• Change in color – 4 ( min.)

• Color Staining – 4 ( min.)

• Satisfactory (Must comply general requirement)

• Satisfactory (Must comply general requirement)

GPT 10

Requirements

± 5 % from specified

**** Garments made by Indigo dyed fibers will be considered in Denim category & these will be tested at 40 deg else all will lie in non-indigo category

• Non indigo dyed : Color change - 3.5 (min), Color staining : 3 (min)

• Indigo dyed & sulfur black colors. Color change - 2 min, Color staining - 2 min

3

• For 0-3 years: 4.0 – 7.5

• For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

2For Denims Seam

Strength 接缝滑移 ASTM D 1683

• After 24 hours of open package conditioning. Garments shall not have any

unpleasant odor which would prevent customer from purchasing. Report as

Unsatisfactory if any unpleasant odour found". 1 per color way

For all type of fabrics

• Babies & Children ( < 14 years ) : < 20 ppm

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

• As required

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

• Color staining: 4-5 (min).

Above 8 oz. 45 lbs.

Weight (oz. / sq. yd.) Seam Strength : lbs.

Upto 5 oz. 25 lbs.

5.01 - 8 oz. 30 lbs.

22 of 57

Sr. No. Test Description 测试项目 Method / Standard

Color Fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Color Fastness to

Dry clean干洗色牢度

ISO 105 D01:2010

SASO 2324:2005

2 pH content PH值 ISO 3071

1Formaldehyde

content甲醛 ISO 14184-1

2

Color fastness to

saliva ( for 0-3 yrs.

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

PRODUCT PERFORMANCE TESTING

Sr. No. Test Description 测试项目 Method / Standard

Appearance after

Wash OR水洗外观 AATCC 135 / 150

Appearance after

Dry clean干洗外观 Commercial Dry clean

2Fabric / Garment

odourVisual Check

1 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

Additional Mandatory Requirements (for Children category upto 14 years)

• Babies & Children ( < 14 years ) : < 20 ppm

• Color staining: 4-5 min.

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

• After 24 hours of open package conditioning. Garments shall not have any unpleasant

odor which would prevent customer from purchasing. Report as Unsatisfactory if any

unpleasant odour found". 1 per color way

• Satisfactory (Must comply general requirement)

ADDITIONAL COLOUR PACK FOR GARMENTS (Non Denim)

Requirements

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

GARMENT PACKAGE

1 &

• Satisfactory (Must comply general requirement)

• For 0-3 years: 4.0 – 7.5 •

For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

• For 55:45 polyester : wool blend:5.5 – 8.5

GPT 11

1

• Change in color – 4 (min)

• Color Staining – 4 (min)

For Denim

• Non indigo dyed : Color change - 3.5 (min), Color staining : 3 (min)

• Indigo dyed & sulfur black colors. Color change - 2 min, Color staining - 2 min

• Color change: 4 (min.)

• Color Staining: 4 (min.)

Requirements

23 of 57

Sr. No. Test Description 测试项目 Method / Standard

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Color Fastness to

Washing OR水洗外观

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Color Fastness to

Dry clean干洗外观 AATCC 132:2009

4 Tensile Strength 拉伸强度 ISO 13934 - 2

1 pH content PH值 ISO 3071

2Formaldehyde

content甲醛 ISO 14184-1

3

Color fastness to

saliva ( for 0-3 yrs.

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

PRODUCT PERFORMANCE TESTING

Sr. No. Test Description 测试项目 Method / Standard

Appearance after

Wash OR水洗外观 AATCC 135 / 150

Appearance after

Dry clean干洗外观 Commercial Dry clean

2Fabric / Garment

odourVisual Check

1 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

GARMENT PACKAGE

Requirements

READYMADE APPARELS PACKAGE FOR 100% SILK

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

• As required

GPT 12

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

Requirements

1 &

• Satisfactory (Must comply general requirement)

• Satisfactory (Must comply general requirement)

• After 24 hours of open package conditioning. Garments shall not have any unpleasant

odor which would prevent customer from purchasing. Report as Unsatisfactory if any

unpleasant odour found". 1 per color way

• Color change: 4 (min.)

• Color Staining: 4 (min.)

• Change in color – 4 (min)

• Color Staining – 3 (min)

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

• Warp – 20 kg (Min)

• Weft – 15 kg (Min)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

Additional Mandatory Requirements (for Children category upto 14 years)

• For 0-3 years: 4.0 – 7.5

• Direct skin contact: 4.0 – 7.5

• Non direct skin contact: 4.0 - 9.0

• Color staining: 4-5 min.

• Babies & Children ( < 14 years ) : < 20 ppm

3

24 of 57

Sr. No. Test Description 测试项目 Method / Standard

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Color Fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Color Fastness to

Dry clean干洗色牢度 AATCC 132:2009

4Tensile Strength (

for Woven) 拉伸强度(梭织) ASTM D 5034

1 pH content PH值 ISO 3071

2Formaldehyde

content甲醛 ISO 14184-1

3

Color fastness to

saliva ( for 0-3 yrs.

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

PRODUCT PERFORMANCE TESTING

Sr. No. Test Description 测试项目 Method / Standard

Appearance after

Wash OR水洗外观 AATCC 135 / 150

Appearance after

Dry clean干洗外观 Commercial Dry clean

2Fabric / Garment

odourVisual Check

1 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

GARMENT PACKAGE

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

• As required

ASTM D3786:2009

(Hydraulic)

FULL PACKAGE FOR BATHROBE , DRESSING GOWN , NEGLIGEE

GPT 13

• Sheer fabrics: 30 lbs. / sq. inch

• Non sheer fabrics: 50 lbs. / sq. inch

Requirements

• Color staining: 4-5 min.

1 &

• Babies & Children ( < 14 years ) : < 20 ppm

• Satisfactory (Must comply general requirement)

• After 24 hours of open package conditioning. Garments shall not have any unpleasant

odor which would prevent customer from purchasing. Report as Unsatisfactory if any

unpleasant odour found". 1 per color way

• For 0-3 years: 4.0 – 7.5

• Direct skin contact: 4.0 – 7.5

• Non direct skin contact: 4.0 - 9.0

Additional Mandatory Requirements (for Children category upto 14 years)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

• Fabric weight: For ≤ 170 gms : 30 lb./sq. inch5

Bursting Strength (

for Knits)胀破强度(针织)

3

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

• Color change: 4 (min.)

• Color Staining: 4 (min.)

• Change in color – 4 (min)

• Color Staining – 3 (min)

• Satisfactory (Must comply general requirement)

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

• Fabric weight: For ≥ 170 gms: 40 lb. / sq. inch

• Sheer fabrics: 7 kg min.

• Non sheer fabrics: 9 kg min.

Requirements

25 of 57

Sr. No. Test Description 测试项目 Method / Standard

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Color Fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Color Fastness to

Dry clean干洗色牢度 AATCC 132:2009

4Tensile strength (For

Woven)拉伸强度(梭织) ASTM D 5034

1 pH content PH值 ISO 3071

2Formaldehyde

content甲醛 ISO 14184-1

3

Color fastness to

saliva ( for 0-3 yrs.

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

PRODUCT PERFORMANCE TESTING

Sr. No. Test Description 测试项目 Method / Standard

Appearance after

Wash OR水洗外观 AATCC 135 / 150

Appearance after

Dry clean干洗外观 Commercial Dry clean

2Fabric / Garment

odourVisual Check

1 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

GPT 14

• Change in color – 4 (min)

• Color Staining – 3 (min)

3• Color change: 4 (min.)

• Color Staining: 4 (min.)

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

• Babies & Children ( < 14 years ) : < 20 ppm

• 9 kg min.

1 &

• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor

which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant

odour found". 1 per color way

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

• Satisfactory (Must comply general requirement)

• Satisfactory (Must comply general requirement)

FULL PACKAGE FOR NECKTIE AND SCARF

• Color staining: 4-5 min.

• For 0-3 years: 4.0 – 7.5

• Direct skin contact: 4.0 – 7.5

• Non direct skin contact: 4.0 - 9.0

Requirements

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

• As required

Additional Mandatory Requirements (for Children category upto 14 years)

26 of 57

Sr. No. Test Description 测试项目 Method / Standard

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

3Color Fastness to

Washing 水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

4 pH content PH值 ISO 3071

5Formaldehyde

content甲醛 ISO 14184-1

Plain Interlock Plain Interlock

Thick 106-118 98-106 146-156 102-110

Medium 126-134 114-138 172-180 118-164

Fine 142-154 152-168 196-212 180-196

Others

1

Color fastness to

saliva ( for 0-3 yrs.

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

PRODUCT PERFORMANCE TESTING

Sr. No. Test Description 测试项目 Method / Standard

1 &Appearance after

Wash OR水洗外观 AATCC 135 / 150

2Stretch & Recovery

(WEFT KNITS)

ASTM D2594

(Modified)

Number of Readings

(Total Repetitions)

3 per Color

(Maximum 2

Colors)

3Fabric / Garment

odourVisual Check

Requirements

* No Elastane Content: Do not Test.

* Tested in Course Direction Only

Elastane Content: Less than 10%:

After 2 hour extension, Measure (C) after 60 minutes. Report both growth

and recovery.

Pass or fail based on growth. Growth: Max. 5%

Elastane Content Equal to or greater than 10%:

After 2 hour extension, Measure (B) after 60 seconds. Report both growth

and recovery.

Pass or fail based on recovery. Recovery: Minimum 85%

* If sample as received Fails:

Report original results - Data Only

After one laundering per care instructions -

Repeat Testing and Pass / Fail based on washed fabric

Pass / Fail based on Each Repetition

• Satisfactory (Must comply general requirement)

• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor

which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant

odour found". 1 per color way

GPT 15

6

• Babies & Children ( < 14 years ) : < 20 ppm •

Others : < 75 ppm

Class of

fabric

织物密度

Requirements

For Cotton Knitted

underwear

• Color staining: 4-5 min.

Additional Mandatory Requirements (for Babies 0 - 3 years)

Report actual or +/- 5% from claims

• For 100 % Cotton : 6.0 – 8.0 • Other

than 100 % Cotton : 4.0-7.5

FULL PACKAGE FOR UNDERWEAR (ONLY 100% COTTON)

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

Determination of

number of Courses

& Wales

• As required

BS 5441 SASO

1170:1997

Number of Courses in 10 cmNumber of Wales in 10

cm

• Color change: 4 (min.)

• Color Staining: 4 (min.)

27 of 57

GPT 15

1 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

28 of 57

Sr. No. Test Description 测试项目 Method / Standard

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

3Color Fastness to

Washing 水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

4 pH content PH值 ISO 3071

1Formaldehyde

content甲醛 ISO 14184-1

2

Color fastness to

saliva ( for 0-3 yrs.

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

PRODUCT PERFORMANCE TESTING

Sr. No. Test Description 测试项目 Method / Standard

1 &Appearance after

Wash OR水洗外观 AATCC 135 / 150

2Stretch & Recovery

(WEFT KNITS)

ASTM D2594

(Modified)

Number of Readings

(Total Repetitions)

3 per Color

(Maximum 2

Colors)

3Fabric / Garment

odourVisual Check

1 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

Requirements

GPT 16

• As required

• Color change: 4 (min.)

• Color Staining: 4 (min.)

• For 100 % Cotton : 6.0 – 8.0

• Other than 100 % Cotton : 4.0-7.5

FULL PACKAGE FOR UNDERWEAR (Other than 100% Cotton)

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

Additional Mandatory Requirements (for Children category upto 14 years)

• Color staining: 4-5 min.

• Satisfactory (Must comply general requirement)

• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor

which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant

odour found". 1 per color way

* No Elastane Content: Do not Test.

* Tested in Course Direction Only

Elastane Content: Less than 10%:

After 2 hour extension, Measure (C) after 60 minutes. Report both growth

and recovery.

Pass or fail based on growth. Growth: Max. 5%

Elastane Content Equal to or greater than 10%:

After 2 hour extension, Measure (B) after 60 seconds. Report both growth

and recovery.

Pass or fail based on recovery. Recovery: Minimum 85%

* If sample as received Fails:

Report original results - Data Only

After one laundering per care instructions -

Repeat Testing and Pass / Fail based on washed fabric

Pass / Fail based on Each Repetition

• Babies & Children ( < 14 years ) : < 20 ppm

• Others : < 75 ppm

29 of 57

Sr. No. Test Description 测试项目 Method / Standard

1Color Fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

2 pH content PH值 ISO 3071

3Formaldehyde

content甲醛 ISO 14184-1

1

Color fastness to

saliva ( for 0-3 yrs.

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

PRODUCT PERFORMANCE TESTING

Sr. No. Test Description 测试项目 Method / Standard

1 &Appearance after

Wash OR水洗外观 AATCC 135 / 150

2Stretch & Recovery

(WEFT KNITS)

ASTM D2594

(Modified)

Number of Readings

(Total Repetitions)

3 per Color

(Maximum 2 Colors)

3Fabric / Garment

odourVisual Check

1 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

Requirements

• Satisfactory (Must comply general requirement)

* No Elastane Content: Do not Test.

* Tested in Course Direction Only

Elastane Content: Less than 10%:

After 2 hour extension, Measure (C) after 60 minutes. Report both

growth and recovery.

Pass or fail based on growth. Growth: Max. 5%

Elastane Content Equal to or greater than 10%:

After 2 hour extension, Measure (B) after 60 seconds. Report both

growth and recovery.

Pass or fail based on recovery. Recovery: Minimum 85%

* If sample as received Fails:

Report original results - Data Only

After one laundering per care instructions -

Repeat Testing and Pass / Fail based on washed fabric

Pass / Fail based on Each Repetition

• After 24 hours of open package conditioning. Garments shall not have any unpleasant

odor which would prevent customer from purchasing. Report as Unsatisfactory if any

unpleasant odour found". 1 per color way

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

ADDITIONAL COLOUR PACK FOR UNDERWEAR

Requirements

• Color change: 4 (min.)

• Color Staining: 4 (min.)

• Babies & Children ( < 14 years ) : < 20 ppm

• Others : < 75 ppm

• Color staining: 4-5 min.

• For 100 % Cotton : 6.0 – 8.0

• Other than 100 % Cotton : 4.0-7.5

Additional Mandatory Requirements (for Children category upto 3 years)

GPT 17

30 of 57

Sr. No. Test Description 测试项目 Method / Standard

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 2636:2006

Type Size

9

9.5

10

10.5

11

11.5

12

Nylon

Others

1 pH content PH值 ISO 3071

2Formaldehyde

content甲醛 ISO 14184-1

3

Color fastness to

saliva ( for 0-3 yrs.

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1 • Color staining: 4-5 min.

For Men's Cotton Nylon

Socks

Additional Mandatory Requirements (for Children category upto 3 years)

580

Additional Mandatory Requirements (for Children category from 3 to 14 years)

Determination of

weight of SocksSASO 2636:2006

500

175, +/- 5%

织物密度

• For 0-3 years: 4.0 – 7.5

• Direct skin contact: 4.0 – 7.5

• Non direct skin contact: 4.0 - 9.0

• Babies & Children ( < 14 years ) : < 20 ppm

GPT 18

FULL PACKAGE FOR SOCKS (Applicable for 95% cotton OR Nylon content Only)

800

Mass of 10 pairs (

gms)

Cotton

650

725

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

• As per clause 6 of SASO 2636

3

470

540

Report actual or +/-5% from claims

31 of 57

Sr. No. Test Description 测试项目 Method / Standard

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

3Color Fastness to

Washing 水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

4 pH content PH值 ISO 3071

1Formaldehyde

content甲醛 ISO 14184-1

2

Color fastness to

saliva ( for 0-3 yrs.

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

PRODUCT PERFORMANCE TESTING

Sr. No. Test Description 测试项目 Method / Standard

1 &Appearance after

Wash OR水洗外观 AATCC 135 / 150

2Fabric / Garment

odourVisual Check

1 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor

which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant

odour found". 1 per color way

• Satisfactory (Must comply general requirement)

• For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

• For 55:45 polyester : wool blend:5.5 – 8.5

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

• Color staining: 4-5 min.

Additional Mandatory Requirements (for Children category from 3 to 14 years)

• Babies & Children ( < 14 years ) : < 20 ppm

• Others : < 75 ppm

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

Additional Mandatory Requirements (for Children category upto 3 years)

Requirements

• As required

• Color change: 4 (min.)

• Color Staining: 4 (min.)

GPT 19

FULL PACKAGE FOR SOCKS (Others)

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

32 of 57

Sr.No Test Description 测试项目 Method / Standard

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护

标)SASO 1173/1174

Color fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Color Fastness to

Dry clean干洗色牢度

ISO 105 D01 SASO

2324 : 2005

4 pH content PH 值 ISO 3071

5

Garment Weight

(Report weight of

full sweater in gm,

mention size of the

sweater received)

BS EN 12127

PRODUCT PERFORMANCE TESTING

Sr. No. Test Description 测试项目 Method / Standard

Appearance after

Wash OR水洗外观 AATCC 135 / 150

Appearance after

Dry clean干洗外观 Commercial Dry clean

2Fabric / Garment

odourVisual Check

1 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

GARMENT PACKAGE

• As required

GPT 20

(Supplier must send the full contracted sample for testing)

3

FULL PACKAGE FOR SWEATER (ADULT)

• Change in color – 4 ( min.)

• Color Staining – 4 ( min.)

• Change in Color: 4 (min.)

• Color Staining: 4 ( min.)

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

Requirements

1 &

• After 24 hours of open package conditioning. Garments shall not have any unpleasant

odor which would prevent customer from purchasing. Report as Unsatisfactory if any

unpleasant odour found". 1 per color way

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

• For 0-3 years: 4.0 – 7.5 •

For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

• Report actual or +/- 5% from claim

• Satisfactory (Must comply general requirement)

• Satisfactory (Must comply general requirement)

33 of 57

Sr.No Test Description 测试项目 Method / Standard

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Color fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Color Fastness to

Dry clean干洗色牢度

ISO 105 D01 SASO

2324 : 2005

4 pH content PH 值 ISO 3071

5Formaldehyde

content甲醛 ISO 14184-1

6

Garment Weight

(Report weight of

full sweater in gm,

mention size of the

sweater received)

BS EN 12127

PRODUCT PERFORMANCE TESTING

Sr. No. Test Description 测试项目 Method / Standard

Appearance after

Wash OR水洗外观 AATCC 135 / 150

Appearance after

Dry clean干洗外观 Commercial Dry clean

2Fabric / Garment

odourVisual Check

1 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

1 &

• Satisfactory (Must comply general requirement)

• Satisfactory (Must comply general requirement)

• As required

• Report actual or +/- 5% from claim

Requirements

3

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

• Change in Color: 4 (min.)

• Color Staining: 4 ( min.)

• After 24 hours of open package conditioning. Garments shall not have any unpleasant

odor which would prevent customer from purchasing. Report as Unsatisfactory if any

unpleasant odour found". 1 per color way

• Change in color – 4 ( min.)

• Color Staining – 4 ( min.)

• For 0-3 years: 4.0 – 7.5 •

For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

• Babies & Children ( < 14 years ) : < 20 ppm

GARMENT PACKAGE

FULL PACKAGE FOR SWEATER ( 8-14 Yrs. )

(Supplier must send the full contracted sample for testing)

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

GPT 21

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

34 of 57

Sr.No Test Description 测试项目 Method / Standard

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Color fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Color Fastness to

Dry clean干洗色牢度

ISO 105 D01 SASO

2324 : 2005

4 pH content PH 值 ISO 3071

5Formaldehyde

content甲醛 ISO 14184-1

6

Color fastness to

saliva ( for 0-3 yrs.

only)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

7

Garment Weight

(Report weight of

full sweater in gm,

mention size of the

sweater received)

BS EN 12127

PRODUCT PERFORMANCE TESTING

Sr. No. Test Description 测试项目 Method / Standard

Appearance after

Wash OR水洗外观 AATCC 135 / 150

Appearance after

Dry clean干洗外观 Commercial Dry clean

2Fabric / Garment

odourVisual Check

1 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

GPT 22

1 &

• Satisfactory (Must comply general requirement)

• Satisfactory (Must comply general requirement)

• As required

• Report actual or +/- 5% from claim

• Color staining: 4-5 min.

3

• Change in Color: 4 (min.)

• Color Staining: 4 ( min.)

GARMENT PACKAGE

FULL PACKAGE FOR SWEATER ( 0 - 8 Yrs. )

(Supplier must send the full contracted sample for testing)

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

• Change in color – 4 ( min.)

• Color Staining – 4 ( min.)

• For 0-3 years: 4.0 – 7.5 •

For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

• Babies & Children ( < 14 years ) : < 20 ppm

Requirements

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

• After 24 hours of open package conditioning. Garments shall not have any unpleasant

odor which would prevent customer from purchasing. Report as Unsatisfactory if any

unpleasant odour found". 1 per color way

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

35 of 57

Sr. No. Test Description 测试项目 Method / Standard

Color Fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Color Fastness to

Dry clean干洗色牢度

ISO 105 D01:2010

SASO 2324:2005

2 pH content PH值 ISO 3071

3

Garment Weight

(Report weight of

full sweater in gm,

mention size of the

sweater received)

BS EN 12127

1Formaldehyde

content甲醛 ISO 14184-1

2

Color fastness to

saliva ( for 0-3 yrs.

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

PRODUCT PERFORMANCE TESTING

Appearance after

Wash OR水洗外观 AATCC 135 / 150

Appearance after

Dry clean干洗外观 Commercial Dry clean

2Fabric / Garment

odourVisual Check

1 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

• For 0-3 years: 4.0 – 7.5 • For

Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

• For 55:45 polyester : wool blend:5.5 – 8.5

• Report actual or +/- 5% from claim

Additional Mandatory Requirements (for Children category upto 14 years)

• Babies & Children ( < 14 years ) : < 20 ppm

• Color staining: 4-5 min.

1 &

• Satisfactory (Must comply general requirement)

• Satisfactory (Must comply general requirement)

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

• After 24 hours of open package conditioning. Garments shall not have any unpleasant

odor which would prevent customer from purchasing. Report as Unsatisfactory if any

unpleasant odour found". 1 per color way

Requirements

(Supplier must send the full contracted sample for testing)

1

• Change in Color: 4 (min.)

• Color Staining: 4 ( min.)

• Change in color – 4 ( min.)

• Color Staining – 4 ( min.)

GARMENT PACKAGE

GPT 23

ADDITIONAL COLOUR PACK FOR SWEATER

36 of 57

Sr. No. Test Description 测试项目 Method / Standard

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

3Color fastness to

Washing水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

4 pH content PH值 ISO 3071

5Bursting Strength (

For Knits)胀破强度

ISO 13938 - 1

(d = 30.5 mm)

1Formaldehyde

content甲醛 ISO 14184-1

2

Color fastness to

saliva ( for 0-3 yrs.

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

PRODUCT PERFORMANCE TESTING

Sr. No. Test Description 测试项目 Method / Standard

1Stretch & Recovery

(WEFT KNITS)

ASTM D2594

(Modified)

Course direction only

Number of

Readings

(Total Repetitions)

3 per Color

(Maximum 2

Colors)

2

Tension &

Elongation

(WARP KNITS)

ASTM D2594

(Modified) For both

Course & Wale direction.

Only for Elastane content

more than 10%

Number of

Readings

(Total Repetitions)

3 per Color

(Maximum 2

Colors)

3Fabric / Garment

odourVisual Check

• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor which

would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant odour found".

1 per color way

* Tested in Course & Wale direction

Report both growth and recovery.

Recommended Growth results: Elongation

75% lengthwise max ; 120% widthwise max Do not Pass or

fail based on growth. Pass or Fail based

on Recovery only. Recovery Minimum 85%

• Babies & Children ( < 14 years ) : < 20 ppm

• Color staining: 4-5 min.

• Change in Color: 4 (min.)

• Color Staining: 4 ( min.)

Additional Mandatory Requirements (for Children category upto 14 years)

• For ≤ 170 gsm : 30 lb./sq. inch

• For ≥ 170 gsm: 40 lb. / sq. inch

• For 0-3 years: 4.0 – 7.5

• For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

GARMENT PACKAGE

FULL PACKAGE SWIMWEAR (Supplier must send the full contracted sample for testing)

GPT 24

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

• As required

Requirements

Requirements

* No Elastane Content: Do not Test.

* Tested in Course Direction Only

Elastane Content: Less than 10%:

After 2 hour extension, Measure (C) after 60 minutes. Report both growth and

recovery.

Pass or fail based on growth. Growth: Max. 5%

Elastane Content Equal to or greater than 10%:

After 2 hour extension, Measure (B) after 60 seconds. Report both growth and

recovery.

Pass or fail based on recovery. Recovery: Minimum 85%

* If sample as received Fails:

Report original results - Data Only

After one laundering per care instructions -

Repeat Testing and Pass / Fail based on washed fabric

Pass / Fail based on Each Repetition

37 of 57

Sr. No. Test Description 测试项目 Method / Standard

1Color Fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

2 pH content PH值 ISO 3071

1Formaldehyde

content甲醛 ISO 14184-1

2

Color fastness to

saliva ( for 0-3 yrs.

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

PRODUCT PERFORMANCE TESTING

Sr. No. Test Description 测试项目 Method / Standard

1Fabric / Garment

odourVisual Check

• Color change: 4 (min.)

• Color Staining: 4 (min.)

• Babies & Children ( < 14 years ) : < 20 ppm

• Color staining: 4-5 min.

For 0-3 years: 4.0 – 7.5

For Direct skin contact: 4.0 – 7.5

For Non direct skin contact: 4.0 – 9.0

Additional Mandatory Requirements (for Children category upto 14 years)

• After 24 hours of open package conditioning. Garments shall not have any unpleasant

odor which would prevent customer from purchasing. Report as Unsatisfactory if any

unpleasant odour found". 1 per color way

Requirements

GPT 25

ADDITIONAL COLOUR PACK FOR SWIMWAER

Requirements

38 of 57

Sr. No. Test Description 测试项目 Method / Standard

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

3 PU Analysis PU 分析 FTIR

Color fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Color Fastness to

Dry clean干洗色牢度

ISO 105 D01

SASO 2324 : 2005

5 pH content PH值 ISO 3071

1Formaldehyde

content甲醛 ISO 14184-1

2

Color fastness to

saliva ( for 0-3 yrs.

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

PRODUCT PERFORMANCE TESTING

Sr. No. Test Description 测试项目 Method / Standard

Appearance after

Wash OR水洗外观 AATCC 135 / 150

Appearance after

Dry clean干洗外观 Commercial Dry clean

2Fabric / Garment

odourVisual Check

1 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

• Change in Color: 4 (min.)

• Color Staining: 4 ( min.)

Additional Mandatory Requirements (for Children category upto 14 years)

• After 24 hours of open package conditioning. Garments shall not have any unpleasant

odor which would prevent customer from purchasing. Report as Unsatisfactory if any

unpleasant odour found". 1 per color way

GARMENT PACKAGE

GPT 26

• Change in color – 4 ( min.)

• Color Staining – 4 ( min.)

Requirements

4

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

• Confirm genuine PU

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

• Color staining: 4-5 min.

• As required

FULL PACKAGE FOR PU GARMENT (PVC SHOULD NOT BE DETECTED)

• For 0-3 years: 4.0 – 7.5

• For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

• Babies & Children ( < 14 years ) : < 20 ppm

1 &

• Satisfactory (Must comply general requirement)

• Satisfactory (Must comply general requirement)

Requirements

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

39 of 57

Sr. No. Test Description 测试项目 Method / Standard

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Color Fastness to

Washing OR水洗外观

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Color Fastness to

Dry clean干洗外观

ISO 105 D01

SASO 2324 : 2005

4 pH content PH值 ISO 3071

1Formaldehyde

content甲醛 ISO 14184-1

2

Color fastness to

saliva ( for 0-3 yrs.

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

PRODUCT PERFORMANCE TESTING

Sr. No. Test Description 测试项目 Method / Standard

Appearance after

Wash OR水洗外观 AATCC 135 / 150

Appearance after

Dry clean干洗外观 Commercial Dry clean

2Fabric / Garment

odourVisual Check

1 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

GARMENT PACKAGE

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

Additional Mandatory Requirements (for Children category upto 14 years)

1 &

3

• Change in color – 4 (min)

• Color Staining – 4 (min)

• Color change: 4 (min.)

• Color Staining: 4 (min.)

GPT 27

FULL PACKAGE FOR ARTIFICIAL FAKE FUR GARMENTS

• As required

• Color staining: 4-5 min.

• For 0-3 years: 4.0 – 7.5

• For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

• Babies & Children ( < 14 years ) : < 20 ppm

Requirements

• Satisfactory (Must comply general requirement)

• Satisfactory (Must comply general requirement)

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor

which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant

odour found". 1 per color way

40 of 57

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标)

SASO 1173/1174

Color Fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Color Fastness to Dry

clean干洗色牢度

ISO 105 D01

SASO 2324 : 2005

4 pH content PH值 ISO 3071

1Formaldehyde

content甲醛 ISO 14184-1

2

Color fastness to

saliva ( for 0-3 yrs.

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

GPT 28

• Color staining: 4-5 min.

FULL PACKAGE FOR HATS , HAND GLOVES , CAP ETC

• For 0-3 years: 4.0 – 7.5

• For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

Additional Mandatory Requirements (for Children category upto 14 years)

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

• As required

• Babies & Children ( < 14 years ) : < 20 ppm

3

• Change in color – 4 (min)

• Color Staining – 4 (min)

• Color change: 4 (min.)

• Color Staining: 4 (min.)

41 of 57

Sr. No. Items Test Method Requirement

SASO 781 : 1994

ISO 5088 No tolerance for single fiber

ISO 1833 Blends: +/- 3% (applicable for Elastane containing blends also)

1(b) Fiber Content for non textile (PU,PVC) In-house Method

1Colorfastness to Rubbing

( ONLY FOR SHELL )ISO 105X12

• Color Change: 4 min.

• Color Staining: 3-4 min.

• Self Staining :4

2 Nickel Spot EN 12471 Not detected

ISO 22775 – 2

(first 24 Hours)

Fiber Content for non-textile bags.

Regarding the composition confirmation of handbags, Landmark requires only the composition

to be verified by the lab, to be placed in care label.

e.g. if the body is PU & the lining is textile, then lab has to confirm the PU by internal method

which is globally recognized & accredited ( e.g. IR spectroscopy method etc.) &

textile part as per existing method.

post which lab will issue test report to the supplier who will print care label

according to lab report

also we don't need %age of PU or PVC, it should just be the confirmation that it's PU.

also don't cut the outer PU layer to take out the inner fabric to find out the composition,

this is not required.

GPT 29

TEXTILE BAGS

OPTIONAL TESTS ( to be advised by QA, not to be performed as a regular test)

LEATHER BAGS & TEXTILE BAGS

3 Corrosion Resistance Not detected

FULL PACKAGE FOR BAG

1(a) Fiber Content for textile (Shell & Lining)

OPTIONAL TESTS ( to be advised by QA, not to be performed as a regular test)

42 of 57

Sr. No. Test Description 测试项目 Method / Standard

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标) SASO 1173/1174

Color Fastness to

Washing水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Color Fastness to

Dry clean干洗色牢度

ISO 105 D01:2010

SASO 2324:2005

PRODUCT PERFORMANCE TESTING

Sr. No. Test Description 测试项目 Method / Standard

Appearance after

Wash OR水洗外观 AATCC 135 / 150

Appearance after

Dry clean干洗外观 Commercial Dry clean

2Fabric / Garment

odourVisual Check

1 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

1 &

• Satisfactory (Must comply general requirement)

• Satisfactory (Must comply general requirement)

• After 24 hours of open package conditioning. Garments shall not have any

unpleasant odor which would prevent customer from purchasing. Report as

Unsatisfactory if any unpleasant odour found". 1 per color way

GPT 30

NOTE: ANY GARMENT HAVING MORE THAN 5% TRIM COVERAGE, THIS TESTING HAS TO BE PERFORMED TESTING MUST BE CARRIIED OUT ALONG

WITH THE MAIN BODY, IF NEEDED, LAB MAY ASK FOR ADDITIONAL GARMENTS.

• As required

FULL PACKAGE FOR LINING

Requirements

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

• Change in Color: 4 (min.)

• Staining: 4 ( min.)

Requirements

• Change in color – 4 ( min.)

• Staining – 4 ( min.)

3

43 of 57

Sr. No. Test Description 测试项目 Method / Standard

1 Fiber Composition 成分

SASO 781 : 1994 ;

ISO 5088 ;

ISO 1833

2

Labelling /

Marking(fiber

composition &care

label)

标签(成分和洗护标) SASO 1173/1174

Color Fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Color Fastness to

Dry clean干洗色牢度

ISO 105 D01:2010

SASO 2324:2005

4 pH content PH值 ISO 3071

1Formaldehyde

content甲醛 ISO 14184-1

2

Color fastness to

saliva ( for 0-3 yrs.

only)(Except White,

Ivory & Ecru color)

耐唾液色牢度(仅适用0-

3岁) DIN 53160-1 • Color staining: 4-5 min.

FULL PACKAGE FOR OTHER APPAREL OR TEXTILE ACCESSORIES

• For 0-3 years: 4.0 – 7.5

• For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

3

• Change in color – 4 (min)

• Staining – 4 (min)

• Color change: 4 (min.)

• Color Staining: 4 (min.)

Additional Mandatory Requirements (for Children category upto 14 years)

• Babies & Children ( < 14 years ) : < 20 ppm

GPT 31

Requirements

• As required

• Follow 16 CFR 303

• No tolerance for single fiber

• Blends: +/- 3% (applicable for Elastane containing blends also)

44 of 57

Sr. No. Test Description 测试项目 Method / Standard

Color Fastness to

Washing OR水洗色牢度

AATCC 61:2010

SASO 170:2005

SASO 2329:2005

Color Fastness to

Dry clean干洗色牢度

ISO 105 D01:2010

SASO 2324:2005

2 pH content PH值 ISO 3071

ApplicabilityFabric

weight

Only for 100 %

Cotton

271 gm/sqm.

(8 oz/sq yd)

or Less

1Formaldehyde

content甲醛 ISO 14184-1

2Color fastness to

saliva ( for 0-3 yrs.

only)(Except White,

耐唾液色牢度(仅适用0-3岁)

DIN 53160-1

PRODUCT PERFORMANCE TESTING

Sr. No. Test Description 测试项目 Method / Standard

Appearance after

Wash OR水洗外观 AATCC 135 / 150

Appearance after

Dry clean干洗外观 Commercial Dry clean

3Fabric / Garment

odourVisual Check

1 &

a. Color change & Cross staining within the garment

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

GARMENT PACKAGE

GPT 32

Additional Mandatory Requirements (for Children category upto 14 years)

• Babies & Children ( < 14 years ) : < 20 ppm

Warp : kg (min) Weft : kg (min)

18

3

ADDITIONAL COLOUR PACK FOR GARMENTS (ONLY DENIM)

Requirements

1

• Non indigo dyed : Color change - 3.5 (min), Color staining : 3 (min)

• Indigo dyed & sulfur black colors. Color change - 2 min, Color staining - 2 min

• Color change: 4 (min.)

• Color Staining: 4 (min.)

1 &

• Satisfactory (Must comply general requirement)

• Satisfactory (Must comply general requirement)

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

2Upto 5 oz. 25 lbs.

5.01 - 8 oz. 30 lbs.

Above 8 oz. 45 lbs.

• After 24 hours of open package conditioning. Garments shall not have any unpleasant odor

which would prevent customer from purchasing. Report as Unsatisfactory if any unpleasant

odour found". 1 per color way

**** Garments made by Indigo dyed fibers will be considered in Denim category & these will be tested at 40 deg else all will lie in non-indigo category

For Denims Seam

Strength 接缝滑移 ASTM D 1683

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having 65 % Viscose Content or more)

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

• For 0-3 years: 4.0 – 7.5 •

For Direct skin contact: 4.0 – 7.5

• For Non direct skin contact: 4.0 – 9.0

• For 55:45 polyester : wool blend:5.5 – 8.5

• Color staining: 4-5 min.

Requirements

For all type of

fabrics

Weight (oz. / sq. yd.) Seam Strength : lbs.

Tensile Strength

(Only for Adult & 8-

14 yrs)

拉伸强度 ASTM D 5034:2009

36

45 of 57

Sr. No. Test Description 测试项目 Method / Standard

1Pull of strength (

Age upto 3 yrs.)

拉力(3岁及以下

)BS EN 71 Part- 1

2

Cords & Drawstring

on Children's

clothing

童装绳索安全 EN 14682

1

Flammability (

Applied to nightwear

upto 14 yrs.)

防火(适用于12岁

及以下的睡衣)EN 14878

Sr. No. Test Description 测试项目 Method / Standard

Fabric Weight in

gms

< 80

80-140

140-200

200-250

80-140

140-200

200-230

230-270

> 270

≤ 140

> 140

Primary Fabric

Weight (gms)

≤ 90

90-120

120-150

150-180

180-240

240-300

> 300

≤ 80

80-140

140-200

200-230

230-250

250-270

> 270

Primary Fabric Type

Primary fabric

Weight oz./ yd2 &

gms

≤ 90

90-120

120-150

150-180

180-240

240-300

> 300

≤ 80

80-140

140-200

200-230

230-250

250-270

> 270

EN 71 part - 1

No small parts, sharp points/sharp edges before and after abuse tests

- Torque test

Torque Rotation of 180 o torque of 0.34Nm period of 5 sec,

maintain for 10 sec in clockwise & anticlockwise direction

Tension test

*(50+2) N when the largest accessible dimension of the component to be gripped and tested is

6mm or less.

*(90+2) N when the largest accessible dimension of the component to be gripped & tested is

greater then 6mm. Apply

the force gradually over a period of approx. 5 sec maintain for 10 sec

Chemical Safety: Optional Testing Applied to nightwear upto 14 yrs.

Class A - All nightwear ( except Pyjamas). There shall be no surface flash. The 3rd marker

thread must not be servered in less than 15 sec

ADITIONAL TEST

(A) OPTIONAL TESTING ( ON BUYERS DESCRETION )

Physical Safety: Optional Testing For Children Garment 0-8 years.

Requirements

Minimum 90 N

Must comply

3

Small parts (0-3 yrs.

old) Sharp points &

sharp edges (0-8 yrs.

old)

小物件(0-3岁)

尖点&利边(0-

8岁)

7.0 9.0

8.0 10.0

10.0 13.0

Requirements

1

For Wovens Seam

slippage & Seam

strength

接缝滑移&强度ISO 13936-1 ISO

13935-2

Seam slippage (kg)

(For Seam Opening

6.00 mm)

Seam strength (Kg)

Tops & Blouses

4.0 6.0

Bottoms (Pyjamas/

Lining / Trousers

/Formal skirts)

7.0 9.0

8.0 11.0

10.0 13.0

12.0 17.0

Warp (kg) Weft (kg)

All pile fabric (Corduroy,

Velveteen, Velvet &

Terry), Flannel &

Seersucker fabrics

7 4.5

12

16.0 21.0

Skirts & Dresses : Only

for loose fitted garment

4.0 6.0

7.0 9.0

25 18

32 22

8

16 9

18 11

20 14

20

23 23

25 25

3For Wovens Tear

Strength撕裂强度 ISO 13937-part 1

Warp (gms)

Other wovens

(except 55:45 polyester :

wool & 65:35 polyester :

cotton blend)

9 7.5

12 10

15 13

17 15

20

2For Wovens

Tensile Strength拉伸强度

ISO 13934 – 2

( 1 inch grab test)

1000 900

1200 1000

1500 1150

Weft (gms)

All pile fabric (Corduroy,

Velveteen, Velvet &

Terry), Flannel &

Seersucker fabrics

550 550

680 590

770 680

900 800

1200 1100

1300 1100

1350 1200

Other wovens

(except 55:45 polyester :

wool & 65:35 polyester :

cotton blend)

400 400

600 600

800 800

1000 1000

46 of 57

Weight (gms)

Upto 170 gsm

170-255 gsm

Above 255 gsm

Weight (gms)

Upto 170 gsm

170-255 gsm

Above 255 gsm

8 Bursting Strength 胀破强度ISO 13938 - 1

(d = 30.5 mm)

9

Color fastness to

Rubbing (Except

White, Ivory & Ecru

color)

摩擦色牢度(除白色、象牙色&米白

色)

ISO 105 X 12

KNITS- ISO 12945 -1

(pill box method) – 14,400

rev., 4 H.

(10,800 rev., 3H for

blends with Wool).

WOVENS &

Tricot(circular knits)-ISO

12945-2 (Martindale

method)

1 UV Protection 防紫外光 EN 13758 - 1

2Color Fastness to

Chlorinated water氯水色牢度 ISO 105 E 03

1 Tensile Strength 拉伸强度ASTM D 5034 : 2009

(1 inch grab test)

2 Seam Strength 接缝强度 ASTM D 1683 : 2007

3 Bursting Strength 胀破强度ISO 13938 - 1

(d = 30.5 mm)

1 Pile Loss IHTM 26

1Color fastness to

Light光照色牢度

ISO 105 B02

(upto grade 5)

1Color Fastness to

Chlorinated water氯水色牢度 ISO 105 E 03

FOR SWIMWEAR

• Change in color:

- Medium to dark – 3.5

- Pastels, bright & neon's – 3.0

Weft : kg (min)

100 % Cotton & Others 36 18

6For Denims

Tensile Strength拉伸强度 ASTM D 5034:2009

• For ≤ 170 gsm : 30 lb./sq. inch

• For ≥ 170 gsm: 40 lb. / sq. inch

• Light color – Dry 4, Wet 3-4(min)

• Dark colors- Dry 3-4, wet 3(min)

• For pigment prints / indigo dyed products: Dry -3, Wet 2-3 (min)

FOR SWIMWEAR

• Change in color:

- Medium to dark – 3.5

- Pastels, bright & neon's – 3.0

7 Mass per unit area 克重 ISO 3801• For 65% Polyester / 35% Cotton fabric ≥ 85gsm

Others report actual or +/- 5% from claim

• 4 (min.)

FOR HATES,GLOVES,CAP

• Change in color:

- Medium to dark – 4-5 min.

- Pastels, bright & neon's – 4.0 min

10

Warp : kg (min)

Weft in Kg

1.8 1.4

3.6 1.6

5.2 1.8

4For Denims Tear

Strength ASTM D 1424 For all

Warp in Kg

11 kg

13.5 kg

22 kg

5For Denims

Seam Strength 接缝滑移 ASTM D 1683 For all

Seam Strength : kg

(min)

FOR ARTIFICIAL FAKE FUR

Pilling 起毛起球

• Knitted – 3-4*

• Wool/Wool blends – 3*

• Woven (2000 rubs) – 4. *

• Tricot (500 rubs) – 3*.

• *assessment after washing

(5A@40 degree C – Flat)

• 50 +

FOR PU GARMENT

• 35 kg / min

• 15 kg / min

• For ≤ 170 gsm : 30 lb./sq. inch

• For ≥ 170 gsm: 40 lb. / sq. inch

47 of 57

Seam strength should cover both shell & lining.

NO AZO dye test should be conducted for white color. AZO test will be applicable if White color is treated with Optical whitener.

When applicable, conduct 3 colors in one AZO test.

In case of forbidden amine detection in a mixed test, a retest has to be conducted systematically on each color to find out the problematic color.

Garments having trims of more than 5% coverage, colorfastness to washing of trims should be performed.

For garments having lining, the lining will be evaluated for fiber analysis & color fastness to washing.

Children wear safety requirements (pH, formaldehyde & saliva) will be applied to all the colors, when different patterns / combinations submitted.

Pull test for children wear apparel to be conducted only on functional trims (buttons, snaps & rivets), not to be conducted on decorative trims & zippers.

Testing instructions:For PU garments, no PVC should be detected.

Print durability will be applied only for garments having AOP (all over print), motif prints, embroidery, applique etc. For solid colors, this test should not be performed.

For full white/cream/ecru colors, there is no need to test colorfastness to Rubbing.

f. Opening of seam ( grinning) or seam slippage

g. Satisfactory appearance of trims / embellishments

h. Print durability ( for garments having all over print) should report any chipping / chunking, color bleeding, unsatisfactory after wash appearances.

b. Color staining & Cross staining in the multi-fiber strip

c. Pilling or Fuzzing

d. Spirality or Seam twist ( max. 5% for knits is allowed)

e. Dimensional stability ( ±3% is for woven & ±5% is allowed for knit), ±7 % for 100% Viscose / Viscose Predominant Blends having upto 65 % Viscose Content or more)

(B) General Note:

Appearance after wash test ( 3 wash or one commercial dry clean) should report the followings:

a. Color change & Cross staining within the garment

48 of 57

-         Labs need to note any contrast fabric or trim used in the garment

-         Test standards & specification needs mention along with test values

For garments with lining

Indicate if the test report is a resubmission

-         shell and lining reports should be mentioned separately in the report

-         for multiple colors, report should mention “A”, “B” etc. for different colors

All test reports should have unique report number for traceability

For garments where fabric reports are already available, the gmt report should have a mention of the fabric evaluation report number

-         Image of the product

-         Photograph of before wash & after wash of the merchandise

-         Summary of the test repot should be on the cover page

-         Report summary should clearly mention Pass/Fail status of the merchandise under the mandatory requirements.

-         Care instruction in the care label ( provided by the supplier)

-         Claimed fiber composition & fabric construction

-         End use e.g. skirts, trousers etc.

-         Category e.g. adult / children / babies

- Complete details of the supplier ( name, contact person, contact details)

-         PO number

-         Style number

-         Date of submission & completion date

(C) Laboratory Responsibilities All Landmark samples should be evaluated according to agreed test package & requirement.

Lab to ensure that correct Landmark standards are being followed.

Labs are required to always include the following information in the test report:

49 of 57

-         Claimed fiber composition & fabric construction

-         End use e.g. skirts, trousers etc.

Category e.g. Men / Ladies /8-14 yrs. Kids (Boy/Girl )/ 2-8Yrs Kids (Boy/Girl ) / Infants

- Complete details name, contact person, contact details

-         PO number

-         Style number

Care instruction in the care label ( provided by the QA on QA data Sheet)

·         Indicate whether further processing will take place e.g. placement prints, garment washing etc.

·         Request a test report to be delivered with the production fabric.

·         Ensure all parameters in the test report conform to Landmark requirements before production.

Vendors are required to always include the following information in the test request form:

(D) Vendor responsibility ·         Understand Landmark requirements

·         The fabric purchase order must include Landmark requirements.

·         Indicate whether contrast trims will be used in the garment e.g. this fabric will be trimmed with white binding.

50 of 57

Products Regulated by Egyptian Customs: Textiles (Only Chemical Test)

Products that are covered under textiles are:

Home Textiles (ES 7266-3/2011),

Garments + Readymade Clothes (ES 7266-4/2011),

Rugs and Carpets (ES 7266-5/2011).

Table: 1

Testing Requirement as per Egyptian Standard ES 7266-3/2011:

TEST REQUIREMENTS Standard Reference

Detection of banned Azo-dyes UNE-EN 14362- 1

Navy blue UNE-EN 14362- 2

BABIES: 20 ppm UNE-EN ISO 14184-1

Direct contact : 75 ppm UNE-EN ISO 14184-2

Without direct contact : 300 ppm

Chromatographic analysisLC-MS & UPLC-SQD

DIN54231

64LFGD 82.02-10

EN 1122

ASTM E1645

0.5 µg/cm2/week

(Only metal parts)

Table: 2

Testing Requirement as per Egyptian Standard ES 7266-4/2011:

TEST REQUIREMENTS Standard Reference

Detection of banned Azo-dyes UNE-EN 14362- 1

Navy blue UNE-EN 14362- 2

BABIES: 20 ppm

Direct CONTACT: 75 ppm UNE-EN ISO 14184-1

Without direct CONTACT: 300 ppm UNE-EN ISO 14184-2

Chromatographic analysisLC-MS & UPLC-SQD

DIN54231

64LFGD 82.02-10

EN 1122

ASTM E1645

0.5 µg/cm2/week

(Only metal parts)

CPSC-CH-E1002-08 (non-metal)

300 ppm CPSC-CH-E1001-08 (metal)

(only for children < 12 years.) CPSC-CH-E1003-09 (Surface coating)

ASTME1645 & ASTM E1613

1000 ppm

(only for children < 12 years.)

Table: 3

EGYPT STANDARDS ( Below will be Tested if signed GCC document is not provided to Max & copy to Testing Lab. ) Company Name should

Match on TRF & GCC

(E) EGYPT Testing method, Limit & Requirement

Forbidden

ForbiddenDetection of Carcinogenic dyes

Forbidden

EN 15777Phthalates

SCOPE OF PRODUCTS: All kinds of Garments, clothing, and embroideries for men, women, children, girls and boys in different fabrics and all sizes.

Formaldehyde

Cadmium Forbidden

Lead

ForbiddenDetection of Carcinogenic dyes

Nickel (SCREEING TEST) EN 1810 & EN 1811 & EN 12472

SCOPE OF PRODUCTS: All kinds of Tapestries, hyraxes, blankets and curtains manufactured of all types. Which includes bath towel, hand towels, pillows,

cushions, cushion filler, bathrobes, bed sheets, mattress topper, comforter, cushion cover, duvet cover, pillow cover, placemat, table cover, table runner

used inside and outside home.

Formaldehyde

Cadmium Forbidden

Nickel (SCREEING TEST) EN 1811 & EN 12472

51 of 57

Testing Requirement as per Egyptian Standard ES 7266-5/2011:

TEST REQUIREMENTS Standard Reference

Detection of banned Azo-dyes UNE-EN 14362- 1

Navy blue UNE-EN 14362- 2

Formaldehyde 300 ppm UNE-EN ISO 14184-1

UNE-EN ISO 14184-2

Auxiliary materials used in dyes, printing and

preparation:Tris phosphine oxide (azir dinyl) Chromatographic analysis

Tris phosphate (2,3 di bromo propyl) HPLC

Poly bromo bi phenyls (PBB)

(only applicable for Carpets and Rugs)

Chromatographic analysisLC-MS & UPLC-SQD

DIN54231

64LFGD 82.02-10

EN 1122

ASTM E1645

16 C.F.R. 1630, 1631

Flammability

Seven out of eight samples passing such that

the area between the carbonised part to the

surround does not exceed 2.54 cm (one inch)

Cadmium Forbidden

Forbidden

Detection of Carcinogenic dyes

Forbidden

Forbidden

SCOPE OF PRODUCTS: Rugs and Floor covering (cotton bath mats) and carpets manufactured from natural or manufactured or compound fibers (whether

woven or otherwise) whether manufactured by hand or by machine.

52 of 57

Table 1A- Textile, Apparel & accessories, Home Textile articles.

Table 1B -Rugs & carpets Articles.

Table 1C-Textile Bags and Purses.

Table 1D-Leather Garments, Bags and purses.

Table 1E- General Shoes.

Table1F- Sports shoes.

Table 2-Banned Pesticides.

Table 3-Banned Alleragens dyestuffs.

Table 4-Banned Chlorinated Organic Carriers.

Table 5-Forbidden flame retradants.

Table 6-Forbidden phthalates in children's clothing.

Table 7-Banned Azo colorants.

Table 8-Banned dyestuffs classified to be carcinogenic.

Name &Designation

GENERAL CERTIFICATE OF CONFORMITY

Phone :

Buyer Name :

Supplier Number:

Please sign this page and return only this page to Max office along with scan copy to Buyer's

Max reserve the right to cancel the order or, if already delivered, return the goods if any of the statements in Max’s GCC requirements will fail in a test

according to a standard method; and Hold me/us (manufacturer /exporter) responsible for all damages caused by products that do not meet the custom

regulatory requirements of different country where max retails.

This is to confirm to you that we, the below registered company and supplier to Max, adheres to the issued GCC /LCR (General certificate of conformity

/Landmark group's Chemical Restrictions Policy.) I/We commit to comply with Max’s GCC Requirement and acknowledge that Max RetailLLC or their

designated consolidators reserve the right to check any order, by any method, at any stage of production;

We confirm we do not supply product that has any of the banned substances as quoted in the document version MX/GCC/001/2012 which covers the

following categories:-

Department :

Company name Company Chop

Contact Person:

Email:

Address:

I/We hereby confirm that I/we have read and taken proper care of all Chemical restrictions citied above while Manufacturing Fabric, ordering

TRIMS for Max orders.

53 of 57

Sr.

No.Test Description 测试项目 Method / Standard

1

Total Lead

(for children ≤ 14 years

old)

总铅(12岁以下儿童

US EPA 3051/3052 analysis with ICP

-EN 71 part 3

2

Phthalates *

(for children ≤ 14 years

old)

邻苯二甲酸盐*

(12岁以下儿童

EN 15777 & CPSC-CH – C1001-09.3

3 Nickel release** 镍释放** EN 1811 & EN 12472

4 Total Cadmium *** 总镉***EN 1122 & microwave digestion

method

5 PBB s**** 多溴联苯**** GC- MS method

6 TRIS**** ( TDBPP) 三(2,3-

二溴丙基)磷酸酯*LC – MS method

7 TEPA ****三(吖丙啶基)氧化磷****

LC – MS method

8 Carcinogenic dyes 致癌染料 DIN 54231

Requirements

• Prohibited ( 10 ppm)

• Prohibited ( 10 ppm)

• Prohibited ( 1 mg/l)

• 90 PPM

• New limit; Total Lead in accessible scrapable surface

coatings

- less than 90 ppm for all painted materials & those

with surface coatings (Clothing, footwear, accessories

& home textiles mainly).

• Sum of 6P ( DEHP, DBP, BBP, DIDP, DINP,

DNOP) : 0.1 % ( 1000 PPM)

• 0.5 µg/cm2/week

• Prohibited ( 100 ppm)

• Prohibited ( 10 ppm)

(G) OPTIONAL TEST PACKAGE BASED ON CASE BASIS ( For EGYPT )

*required for coated leather, artificial leather ( PU, PVC, rubber, EVA), various plastics and printed fabrics.

**only required for metal component

***only required for surface coating, printed fabric and plastic component

****only required for material with flame retardant finishes

54 of 57

55 of 57

1) Hand Wash

Only Hand wash

Maximum temperature 30 deg C

Line Dry

Handle with care

1.1) Hand Wash

Only Hand wash

Maximum temperature 30 deg C

Line Dry

Handle with care

2) Regular Wash

Machine wash

Maximum temperature 30 deg C

Mechanical action normal

Rinsing & Spinning normal

3) Regular Wash Gentle cycle

Machine wash

Maximum temperature 30 deg C

Mechanical action much reduced

Rinsing normal & Spinning reduced

4) Regular Wash - For Denims

Machine wash

Maximum temperature 40 deg C

Mechanical action normal

Rinsing & Spinning normal

(I). WASHING INSTRUCTIONS

If care symbols says 30 deg machine wash or hand wash then follow as below

AATCC 61 - 1B for all machine washable styles. (10 rubber balls, 20 min cycle, tested at 30 deg )

AATCC 61 - 1B for all hand washable styles. (10 rubber balls, 20 min cycle, tested at 30 deg )

56 of 57

(J) NOTES

57 of 57


Recommended