+ All Categories
Home > Documents > Vessel Presentation by Seyi 2

Vessel Presentation by Seyi 2

Date post: 26-Oct-2014
Category:
Upload: seyiremmy
View: 115 times
Download: 1 times
Share this document with a friend
Popular Tags:
25
PRESENTATION ON PRESENTATION ON VESSEL DESIGN VESSEL DESIGN BY BY OGUNREMI ‘SEYI OGUNREMI ‘SEYI
Transcript
Page 1: Vessel Presentation by Seyi 2

PRESENTATION ON PRESENTATION ON VESSEL DESIGNVESSEL DESIGN

BYBY

OGUNREMI ‘SEYIOGUNREMI ‘SEYI

Page 2: Vessel Presentation by Seyi 2

Mechanical equipment can Mechanical equipment can be classified into be classified into RotatingRotating and and Static Static equipment.equipment.

INTRODUCTION

Page 3: Vessel Presentation by Seyi 2

MECHANICAL EQUIPMENT

ROTATINGEQUIPMENT

STATICEQUIPMENT

VESSEL

HEAT EXCHANGER

TANKS

PUMPS

COMPRESSORS

TURBINE

COLUMNS

GENERATORSREACTORS

Page 4: Vessel Presentation by Seyi 2

VESSELSVESSELS

What are Vessels?Vessels are equipment usually a closed container designed to hold gases or liquid at a pressure different from ambient pressure.

Page 5: Vessel Presentation by Seyi 2

VESSEL SHAPESVESSEL SHAPES

Pressure vessels may Pressure vessels may theoretically be almost any theoretically be almost any shape, but shapes made of shape, but shapes made of sections of spheres, cylinders, sections of spheres, cylinders, and cones are usually and cones are usually employed.employed.

Page 6: Vessel Presentation by Seyi 2

A common design is a cylinder A common design is a cylinder with hemispherical end caps with hemispherical end caps called heads.called heads.

Shell Shell Head types - Elliptical HeadHead types - Elliptical Head

- Hemispherical Head- Hemispherical Head

- Cone- Cone

- Truncated cone- Truncated cone

- Sphere- Sphere

VESSEL CONFIGURATION

Page 7: Vessel Presentation by Seyi 2

Head shapes

CONICAL HEAD

Page 8: Vessel Presentation by Seyi 2

2:1 ELLIPTICAL HEAD

Page 9: Vessel Presentation by Seyi 2

VESSEL WITH DISHED HEAD

Page 10: Vessel Presentation by Seyi 2

VESSELVESSEL ORIENTATIONORIENTATION

HORIZONTAL VESSEL

Page 11: Vessel Presentation by Seyi 2

VERTICALVESSELVERTICALVESSEL

Page 12: Vessel Presentation by Seyi 2

INTERNAL VIEW(TYPICAL)INTERNAL VIEW(TYPICAL)

Page 13: Vessel Presentation by Seyi 2

INTERNAL VIEW(TYPICAL)INTERNAL VIEW(TYPICAL)

Page 14: Vessel Presentation by Seyi 2

CONSTRUCTION MATERIALSCONSTRUCTION MATERIALS

•Generally, almost any material with good tensile properties that is chemically stable in the chosen application can be employed.• Common materials for OFON 2 Vessels include SA 516 GR 60, GR 70 ..etc.• Special materials like Nickel,Monel,Incolloy 800,Inconel 400 etc.

Page 15: Vessel Presentation by Seyi 2

CONSTRUCTION MATERIALSCONSTRUCTION MATERIALS

•Many pressure vessels are made of steel and steel alloys like carbon steel,Normalized carbon steel etc.• Other very common materials include copper and polymers.

Page 16: Vessel Presentation by Seyi 2

APPLICATIONSAPPLICATIONS

Power Generation Industries for Power Generation Industries for fossil, gas, and Nuclear power.fossil, gas, and Nuclear power.

Petrochemical industries for Petrochemical industries for storing and processing crude oil.storing and processing crude oil.

Chemical Industries as Chemical Chemical Industries as Chemical reactors.reactors.

Page 17: Vessel Presentation by Seyi 2

VESSEL ON SKIDVESSEL ON SKID

Page 18: Vessel Presentation by Seyi 2

LIST OF STANDARDSLIST OF STANDARDS

ASME Code Section VIII Division 1ASME Code Section VIII Division 1 (USED ON OFON 2) (USED ON OFON 2) ASME Code Section VIII Division 2ASME Code Section VIII Division 2 Alternative Rule Alternative Rule ASME Code Section VIII Division 3ASME Code Section VIII Division 3 Alternative Rule for Alternative Rule for

Construction of High Pressure Vessel Construction of High Pressure Vessel PD 500PD 500 ASME PVHOASME PVHO (Safety Standard for Pressure Vessels for (Safety Standard for Pressure Vessels for

Human Occupancy) Human Occupancy) BS 5500 BS 5500 AD Merkblätterasa AD Merkblätterasa ISO 11439ISO 11439 e.t.c e.t.c BS 4994 BS 4994 EN 13445EN 13445

Page 19: Vessel Presentation by Seyi 2

APPLICABLE DOCUMENTSAPPLICABLE DOCUMENTSFOR VESSEL DESIGN OFP2FOR VESSEL DESIGN OFP2 ASME VIII DIV 1 & 2(BOILER & ASME VIII DIV 1 & 2(BOILER &

PRESSURE VESSEL CODE).PRESSURE VESSEL CODE). Total General Specifications (GS) theTotal General Specifications (GS) the PVV SPECS.PVV SPECS. P&ID, PFD,UFDP&ID, PFD,UFD Project SpecificationsProject Specifications Process Design BasisProcess Design Basis Mechanical Design BasisMechanical Design Basis

Page 20: Vessel Presentation by Seyi 2

SOFTWARES FORSOFTWARES FORFOR VESSEL DESIGN & ANALYSISFOR VESSEL DESIGN & ANALYSIS

PV ElitePV EliteCompressCompressMicroprotol(Used on OFP2)Microprotol(Used on OFP2)

Page 21: Vessel Presentation by Seyi 2

VESSEL DESIGN ANALYSISVESSEL DESIGN ANALYSIS• • Design dataDesign data• • Materials used and allowable Materials used and allowable

stresses determinationstresses determination• • Shell(s) thicknessShell(s) thickness• • Head(s) thicknessHead(s) thickness• • Vessel sketchVessel sketch• • Pressure test calculationPressure test calculation

Page 22: Vessel Presentation by Seyi 2

Stress verification under hydrostatic test Stress verification under hydrostatic test conditionsconditions

• • Nozzle (s) thickness and reinforcementNozzle (s) thickness and reinforcement • • Multiple openings reinforcement Multiple openings reinforcement

verificationverification • • Nozzles loadingNozzles loading • • Weight calculationWeight calculation • • Wind/Seismic analysisWind/Seismic analysis • • Supports calculation (including anchor Supports calculation (including anchor

bolts, even if not part of the supply)bolts, even if not part of the supply) • • Lifting devices (lugs, trunnions, etc.) Lifting devices (lugs, trunnions, etc.)

calculation.calculation.

Page 23: Vessel Presentation by Seyi 2

INTERFACE WITH OTHERINTERFACE WITH OTHERDISCIPLINESDISCIPLINES

ProcessProcess InstrumentationInstrumentation CorrosionCorrosion PipingPiping

Page 24: Vessel Presentation by Seyi 2

SOME VESSELS SOME VESSELS USED ON OFP2USED ON OFP2

Separators Flare Drums Knock Out Drums Instrument Air Receivers Pig Launchers and Receivers Seawater Dearation Tower Expansion Drums Inlet and outlet Scrubbers Storage Drums etc.

Page 25: Vessel Presentation by Seyi 2

Thank you for your time Thank you for your time and attention.and attention.


Recommended