www.wolpertwilson.com HV0.01 up to HV2, and HK0.01 to HK2 Direct load selection automatically changes in test settings Motorized turret operation, enabling automated test cycle by the push of start button Smooth XY-stage 100x100 mm, travel 25x25 mm, motorized versions available Hardness diagonals, value, statistics and conversions on backlit display Easy-to-use interface in 6 different languages. Solid eyepiece with digital encoder Two optical paths, for eyepiece and ccd-camera Applications • Steels, non-ferrous metals, IC wafer • Thin plastic, metallic foils, plating, coating, surface layers, laminated metals • Effect of heat treatment • Hardness depths of carburized layer and flame hardened layer • Cemented carbide, ceramics, steels, non-ferrous metals • Thin plates, metallic foils, plating, miniature objects • Hardness resulting from welding or deposition The Series 400 Vickers and Knoop testers are versatile, user-friendly, and provide an affordable, reliable solution for accurate Vickers and Knoop hardness scale testing, both for quality assurance or metallurgical research. The 400 Series is available with an automatic turret and comes equipped with crisp optics that have a total magnification of 100x and 400x. The systems feature eight dial selectable test forces ranging from 10 g to 2 kg (see table). For easy sample mounting, models are equipped with a 100 x 100 mm precision XY stage with 25 mm movement in each direction. Wolpert Wilson ® Instruments 402 MVD Microhardness Tester from 10 gf to 2 kgf
Transcript
www.wolpertwilson.com
HV0.01 up to HV2, and HK0.01 to HK2 Direct load selection automatically changesin test settings
Motorized turret operation, enabling automated test cycle by the push of start button
Smooth XY-stage 100x100 mm,travel 25x25 mm, motorized versions available
Hardness diagonals, value, statistics andconversions on backlit display
Easy-to-use interface in 6 different languages.
Solid eyepiece with digital encoder
Two optical paths,for eyepiece and ccd-camera
Applications
• Steels, non-ferrous metals, IC wafer • Thin plastic, metallic foils, plating, coating, surface layers, laminated metals • Effect of heat treatment• Hardness depths of carburized layer and fl ame hardened layer
• Cemented carbide, ceramics, steels, non-ferrous metals• Thin plates, metallic foils, plating, miniature objects• Hardness resulting from welding or deposition
The Series 400 Vickers and Knoop testers are versatile, user-friendly, and provide an affordable, reliable solution for accurate Vickers and Knoop hardness scale testing, both for quality assurance or metallurgical research. The 400 Series is available with an automatic turret and comes equipped with crisp optics that have a total magnifi cation of 100x and 400x. The systems feature eight dial selectable test forces ranging from 10 g to 2 kg (see table). For easy sample mounting, models are equipped with a 100 x 100 mm precision XY stage with 25 mm movement in each direction.
Wolpert Wilson® Instruments 402 MVDMicrohardness Tester from 10 gf to 2 kgf
Operating Temperature Range: 10 to 38°C (50 to 100°F)
Humidity 10% to 90% non-condensing
Dimensions 513 mm (20,2”) x 320 mm (12,6”) x 470 mm (18.5”)
Weight 36 kg (79.4lbs)
Power Supply 110-220V AC, 60/50Hz
Accessories
• XY-stage with digital micrometers• Hardness reference blocks HV/HK with NVLAP, UKAS or DKD certifi cate• Precision vices, V-blocks and special clamps• Minuteman ELT™ PC-controlled Camera system• Motorized XY-stages
Please ask for a full accessories catalog
Wolpert Wilson Instruments offer a wide range ofreference blocks. All certifi ed reference blocks will be issued with a certifi cate traceable to internationally recognized standards, such as UKAS, DKD or ASTM.
