victaulic.com 30.93 8614 Rev C Updated 11/2016 © 2016 Victaulic Company. All rights reserved.
ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT.
867–400 867–4UF 867–459 867–7UL 867–7UF 867–759 867-42T 867-43T
1.0 PRODUCT DESCRIPTION
Function• 867–400: Pilot Operated, Pressure Reducing Valve
• 867–4UF: Pilot Operated, Pressure Relief Valve
• 867–459: Pilot Operated, Pressure Relief Valve with Electric Override
• 867–7UL: Pilot Operated, Pressure Reducing Valve
• 867–7UF: Pilot Operated, Pressure Relief Valve
• 867–759: Pilot Operated, Pressure Relief Valve with Electric Override
• 867-42T: Pilot Operated, Pressure Reducing Valve
• 867-43T: Pilot Operated, Pressure Relief Valve
Operating Temperature by Material• Standard: Natural Rubber: 122ºF/50ºC
• Optional: Nitrile/NBR: 176ºF/80ºC
• Optional: EPDM: 194ºF/90ºC
End Connections• Grooved (OGS)
• Flanged
• Threaded
Typical Applications• Fire Protection Pump Rooms
• Floor Control Assemblies
Codes and Requirements • NFPA 13
• NFPA 14
• NFPA 20
• NFPA 25
Victaulic® Pressure ValvesSeries 867-400, 867-4UF, 867-459, 867-7UL, 867-7UF, 867-759, 867-42T, 867-43T 30.93
1
System No. Location
Submitted By Date
Spec Section Paragraph
Approved Date
30.93 8614 Rev C Updated 11/2016 © 2016 Victaulic Company. All rights reserved.
victaulic.com
1.1 PRODUCT DESCRIPTION
Available Sizes, Pressure Ratings and Agency Approvals3
Product Configuration
Nominal Size Range FM Approval UL Listed Pilot Set Range
inches mm
psi bar
psi bar
psi bar
867-4UF2 – 6 175 175 30 – 175
50 – 150 12 12 2 – 12
867-7UL
2 – 6 NO FM APPROVAL
300 30 – 165
50 – 150 21 2 – 11.5
8NO FM APPROVAL
175 30 – 165
200 12 2 – 11.5
867-7UF
2 – 6 200 350 30 – 175
50 – 150 14 24 2 – 12
8 200 175 30 – 175
200 14 12 2 – 12
Product Configuration
Nominal Size Range FM Approval UL Listed
inches mm
psi bar
psi bar
Threaded
Grooved (OGS), Flanged ANSI
Class 300
Flanged ANSI
Class 150
Grooved (OGS), Flanged ANSI
Class 300
Flanged ANSI
Class 150
Rating Pilot Range Rating Pilot
Range Rating Pilot Range Rating Pilot
Range Rating Pilot Range
867-42T2
1 ½ 365 30 – 175 365 30 – 175 235 30 – 175 – – – –
40 25 2 – 12 25 2 – 12 16 2 – 12
2, 2 ½ – –
365 30 – 175 235 30 – 175 – – – –
50, - 25 2 – 12 16 2 – 12
3 – 8 – –
365 30 – 175 235 30 – 175 365 60 – 175 250 60 – 175
80 – 200 25 2 – 12 16 2 – 12 25 4 – 12 17 4 – 12
101
– – 300 30 – 175 235 30 – 175 300 60 – 175 250 60 – 175
250 21 2 – 12 16 2 – 12 21 4 – 12 17 4 – 12
867-43T
1 ½ – 2, 2 ½ – –
365 125 – 365 235 60 – 235 – – – –
40 , 50, - 25 9 – 25 16 4 – 16
3 – 8 – –
365 125 – 365 235 60 – 235 365 125 – 365 – –
80 – 200 25 9 – 25 16 4 – 16 25 9 – 25
101
– – 300 125 – 300 235 60 – 235 365 125 – 365
– – 250 21 9 – 21 16 4 – 16 25 9 – 25
1 10" (250) is only available as Class 300 Flange at this time 2 Max recommended pressure differential: 175 psi/12 Bar when normal inlet operation pressure is below 330 psi/23 Bar Max recommended pressure differential: 200 psi/4 Bar when normal inlet operation pressure is above 330 psi/23 Bar 3 Valve body material may change listing or approval. See Victaulic for details.
Available Sizes and Manufacturer's Pressure Rating - See Section 2.0 Certifications/Listings
Product Configuration
Nominal Size Range
Manufacturer's Pressure Rating Pilot Set Range
inches mm
psi bar
psi bar
867-4002 – 12 250 30 – 165
50 – 300 17 2 – 11.5
867-4592 – 12 175 30 – 175
50 – 300 12 2 – 12
867-7591.5 – 16 200 30 – 175
40 – 400 14 2 – 12
2
victaulic.com
30.93 8614 Rev C Updated 11/2016 © 2016 Victaulic Company. All rights reserved.
victaulic.com
1.2 PRODUCT DESCRIPTION
Available Sizes by Material and End Connection
Body Material Ductile Iron Body Cast Steel & Stainless Steel Ni-Al Bronze Body
Valve Connection Grooved Flanged ANSI B16.42 Threaded Flanged ANSI B16.5 Threaded Flanged ANSI B16.24
Valve Configuration
Grooved
Flanged ANSI
Class 150
Flanged ANSI
Class 300 NPT / BSP
Flanged ANSI
Class 150
Flanged ANSI
Class 300 NPT / BSP
Flanged ANSI
Class 150
Flanged ANSI
Class 300
inches mm
inches mm
inches mm
inches mm
inches mm
inches mm
inches mm
inches mm
inches mm
867-400 867-4UF 867-459
2, 3, 4, 6, 8 2 – 12–
2 2 – 12–
2 2 – 12–
50, 80, 100, 150, 200 50 – 300 50 50 – 300 50 50 – 300
867-7UL 867-7UF 867-759
1 ½ – 8 1 ½ – 16 2 – 6 2, 2½, 3 2 – 8 2 – 6 2, 2½, 3 2 – 8 2 – 6
40 – 200 40 – 400 50 – 150 50, 65, 80 50 – 200 50 – 150 50, 65, 80 50 – 200 50 – 150
867-42T 867-43T
1 ½ – 8 1 ½ – 10 1 ½ – 10 1 ½
– – – – –40 – 200 40 – 250 40 – 250 40
2.0 CERTIFICATION/LISTINGS
NOTES• Refer to Available Sizes/Pressure Ratings Table in section 1.0 for specific units and materials.
• Series 867-400, 867-459 and 867-759 are not listed or approved by FM or UL.
3
victaulic.com
30.93 8614 Rev C Updated 11/2016 © 2016 Victaulic Company. All rights reserved.
victaulic.com
3.0 SPECIFICATIONS - MATERIAL
Series 867-400, 867-4UF, 867-459 Body Style
Cover: (specify choice)
Standard: Ductile Iron ASTM A536 65–45–12
Optional: Cast Steel ASTM A216 Grade WCB (coated)
Optional: Nickel Aluminum Bronze ASTM B148 C95800
Optional: Stainless Steel 316 ASTM A351 Grade CF8M
Valve Body: (specify choice)
Standard: Ductile Iron ASTM A536 65–45–12
Optional: Cast Steel ASTM A216 Grade WCB (coated)
Optional: Nickel Aluminum Bronze ASTM B148 C95800
Optional: Stainless Steel 316 ASTM A351 Grade CF8M
Elastomeric Assembly: (specify choice)
Standard: NR, Polyamide fabric reinforced Polyisoprene
Optional: NBR, Polyamide fabric reinforced Nitrile (Buna -N)
Optional: EPDM, Polyamide fabric reinforced Ethylene-Propylene
External Bolts/Nuts: Stainless Steel 316 ASTM A320 Grade B8F
Coating: (specify choice)
Standard: Electrostatic Powder Coating Polyester
Optional: High Build Epoxy Fusion-Bonded with UV Protection, Anti-Corrosion
Valve Body
External Bolts/Nuts
Cover
Coating
Elastomeric Assembly
4
victaulic.com
30.93 8614 Rev C Updated 11/2016 © 2016 Victaulic Company. All rights reserved.
victaulic.com
Cover: (specify choice)
Standard: Ductile Iron ASTM A536 65–45–12
Optional: Cast Steel ASTM A216 Grade WCB (coated)
Optional: Nickel Aluminum Bronze ASTM B148 C95800
Optional: Stainless Steel 316 ASTM A351 Grade CF8M
Cover Bolt: (specify choice)
Standard: Zinc Plated Steel
Optional: Stainless Steel 316 ASTM A320 Grade B8F
Cover Nut: (specify choice)
Standard: Zinc Plated Steel
Optional: Stainless Steel 316 ASTM A320 Grade B8F
Separation Partition: (specify choice)
Standard: Ductile Iron ASTM A536 65–45–12
Optional: Cast Steel ASTM A216 Grade WCB (coated)
Optional: Nickel Aluminum Bronze ASTM B148 C95800
Optional: Stainless Steel 316 ASTM A351 Grade CF8M
Stud: (specify choice)
Standard: Zinc Plated Steel
Optional: Stainless Steel 316 ASTM A320 Grade B8F
Stud Nut: (specify choice)
Standard: Zinc Plated Steel
Optional: Stainless Steel 316 ASTM A320 Grade B8F
Valve Body: (specify choice)
Standard: Ductile Iron ASTM A536 65–45–12
Optional: Cast Steel ASTM A216 Grade WCB (coated)
Optional: Nickel Aluminum Bronze ASTM B148 C95800
Optional: Stainless Steel 316 ASTM A351 Grade CF8M
Spring: Stainless Steel 302
Removable Seat: Stainless Steel 304 ASTM A743 Grade CF8
Seal: NBR, Polyamide fabric reinforced Nitrile (Buna–N)
Upper Plug: Brass
Shaft Lock Nut: Stainless Steel 303 ASTM A582 95B S30300A
Shaft Nut: Stainless Steel 316 ASTM A320 Grade B8F
Diaphragm Washers: Stainless Steel 431 ASTM A743 Grade CA15M
Diaphragm: NBR, Polyamide fabric reinforced Nitrile (Buna–N)
Bearing Screw: Stainless Steel 303 ASTM A582 95B S30300A
Bearing: Bronze ASTM B505 Grade C83600
Shaft: Stainless Steel 303 ASTM A582 95B S30300A
Seal Disk: Stainless Steel 431 ASTM A743 Grade CA15M
3.1 SPECIFICATIONS - MATERIAL
Series 867-7UL, 867-7UF, 867-759 Body Style
Cover Bolt
Cover
Cover Nut
Separation Partition
Stud Nut
Valve Body
Spring
Removable Seat
Upper PlugShaft Lock Nut
Shaft Nut
Diaphragm WasherDiaphragm
Bearing Screw
Bearing
Shaft
Seal Disk
Seal
5
victaulic.com
30.93 8614 Rev C Updated 11/2016 © 2016 Victaulic Company. All rights reserved.
victaulic.com
3.2 SPECIFICATIONS - MATERIAL
Series 867-42T, 867-43T Body Style
Body and Cover: (specify choice)*
Ductile Iron - ASTM A536 Grade 65-45-12
Optional: Cast Steel ASTM A216 Grade WCB
Optional: Stainless Steel 316 ASTM A351 Grade CF8M
Optional: Nickel Aluminum Bronze ASTM B148, Grade C95800
Optional: Super Duplex ASTM A890 Grade 5A
Optional: Hastelloy ASTM B336 Grade C276
Optional: Titanium ASTM B367 Grade C2 / C3
External Bolts: (specify choice)
Standard: Stainless steel 316 ASTM A276
Diaphragm Assembly: (specify choice)
Standard: NR - Fabric Reinforced Polyisoprene
Optional: Fabric Reinforced Nitrile (Buna-N)
Optional: Fabric Reinforced Ethylene-Propylene
Coating: (specify choice)
Standard: Electrostatic Powder Coating Polyester
Optional: High Build Epoxy Fusion-Bonded with UV Protection, Anti-Corrosion
Limit switch double/single: (specify choice)
Wetted internal parts - AISI 316, Monel, or Hastelloy.
Visual position indicator: (specify choice)
Wetted internal parts - AISI 316, Monel, or Hastelloy.*Note: Flanged end connection available in all materials, grooved and threaded available in ductile iron only.
External Bolts
Body and Cover
Visual Indicator
Limit Switch
Diaphragm Assembly
Coating
6
victaulic.com
30.93 8614 Rev C Updated 11/2016 © 2016 Victaulic Company. All rights reserved.
victaulic.com
4.0 DIMENSIONS
Series 867–400, 867-4UF, 867-459
SizeFlanged ANSI Class 150 Grooved (OGS)Dimensions Weight3 Dimensions Weight3
Nominal
Actual Outside Diameter LF W H RF
Approx.
(Each) LG W H RG
Approx.
(Each)inches
DNinches mm
inches mm
inches mm
inches mm
inches mm
lb kg
inches mm
inches mm
inches mm
inches mm
lb kg
2 2.375 8.13 6.13 2.88 3.13 20 8.06 4.75 2.94 1.19 11DN50 60.3 205 155 74 78 9 205 120 74 30 5
3 3.5 10.13 7.88 4.38 3.88 42 9.81 6.88 4.31 1.75 23DN80 88.9 257 200 110 100 19 250 175 110 44.5 10.6
4 4.5 12.63 8.75 5.13 4.5 62 12.63 7.88 5.13 2.25 36DN100 114.3 320 223 130 115 28 320 200 130 57 16.2
6 6.625 16.38 12 8.13 5.5 150 16.31 12.06 12.38 3.25 108DN150 168.3 415 306 205 140 68 415 306 205 84.2 49
8 8.625 19.63 14.38 10.13 6.75 276 19.63 14.38 10.13 4.38 238DN200 219.1 500 365 256 172 125 500 365 256 110 108
10 10.75 23.81 16 10.13 8 309– – – – –
DN250 273 605 405 256 204 14012 12.75 28.5 24 14.63 9.5 485
– – – – –DN300 323.9 725 610 373 242 220
3 Weight based on standard ASTM A536 65-45-12 Ductile Iron Body
SizePorts - All End Connections
Dimensions
Nominal
Actual Outside Diameter a4 b4 c4 d5 Control Volume6
inches DN
inches mm
inches mm
inches mm
inches mm
inches mm
gallons liters
2 2.375 0.5 0.25 0.5 0.75 0.03DN50 60.3 15 8 15 20 0.12
3 3.5 0.5 0.25 0.5 1.5 0.08DN80 88.9 15 8 15 40 0.29
4 4.5 0.5 0.25 0.5 2 0.18DN100 114.3 15 8 15 50 0.67
6 6.625 0.5 0.25 0.5 2 0.51DN150 168.3 15 8 15 50 1.94
8 8.625 0.5 0.25 0.5 2 1.02DN200 219.1 15 8 15 50 3.86
10 10.75 0.5 0.25 0.5 2 1.02DN250 273 13 6 13 51 3.86
12 12.75 0.5 0.38 0.5 2 3.65DN300 323.9 13 6 13 51 13.8
4 (a), (b), (c) are NPT Thread ports 5 (d) is BSPT threaded optional drain port 6 (Control Volume) is Control Chamber Displacement Volume of Liquid pushed when valve opens
ad
LF
a
LG
ad
a
LT
ad
a
b
C bb
RT
H
H
RF
H
RG
W
ad
LF
a
LG
ad
a
LT
ad
a
b
C bb
RT
H
H
RF
H
RG
W
7
victaulic.com
30.93 8614 Rev C Updated 11/2016 © 2016 Victaulic Company. All rights reserved.
victaulic.com
4.1 DIMENSIONS
Series 867–7UL, 867-7UF, 867-759
Size
Grooved (OGS)
Flanged ANSI
Class 150 Flanged ANSI Class 150 and GroovedFlanged
ANSI Class 150Dimensions Weight7
Nominal
Actual Outside Diameter LG8 L W R La ha Hy Ha
Y Approx.
(Each)
A Approx.
(Each)inches
DNinches mm
inches mm
inches mm
inches mm
inches mm
inches mm
inches mm
inches mm
inches mm
lb kg
lb kg
1 ½ 1.9 8.1 8.1 6.1 3.1 4.9 3.3 9.4 8.9 23 22DN40 48.3 205 205 165 78 124 85 239 227 10.6 10
2 2.375 8.1 8.1 6.1 3.3 4.9 3.3 9.6 8.9 23 22DN50 60.3 205 205 165 83 124 85 244 227 10.6 10
2 ½ 2.875 8.3 8.3 7 3.7 5.9 4.3 10.1 9.9 29 2773 222 222 178 95 149 109 257 241 13 12
3 3.5 9.8 9.8 7.9 3.9 6 4 12 11.1 49 47DN80 88.9 250 250 200 100 152 102 305 281 22 21.5
4 4.5 12.6 12.6 8.8 4.5 7.5 5 14.4 13.5 82 77DN100 114.3 320 320 223 115 190 127 366 342 37 35
6 6.625 16.4 16.3 12.6 5.6 8.9 6 19.4 17.4 165 157DN150 168.3 415 415 320 143 225 152 492 441 75 71
8 8.625 19.7 19.7 15.4 6.8 10.4 8 23 21.5 276 260DN200 219.1 500 500 390 172 265 203 584 545 125 118
10 10.75–
23.8 18.9 8 12.6 8.6 28.5 24.9 478 452DN250 273 605 480 204 320 219 724 633 217 205
12 12.75–
28.5 21.7 9.5 15.6 10.7 33.1 30.6 816 772DN300 323.9 725 550 242 396 273 840 777 370 350
14 14–
28.9 21.7 10.6 15.7 11 34.1 30.7 840 216DN350 355.6 733 550 268 400 279 866 781 381 370
16 16–
39 29.1 11.8 17.7 14.5 43.6 42.6 1865 1764DN400 406.4 990 740 300 450 369 1,108 1,082 846 800
7 Weight based on standard ASTM A536 65-45-12 Ductile Iron Body8 LG is for Grooved ends (see available sizes)
NOTE• Dimensions and port dimensions (a, b, c, d) continued on page 9
dL & LG
a
cb
a
b
c
b
cLa
a
cb
a
Hy
R
W
Ha
ha
dL & LG
a
cb
a
b
c
b
cLa
a
cb
a
Hy
R
W
Ha
ha
8
victaulic.com
30.93 8614 Rev C Updated 11/2016 © 2016 Victaulic Company. All rights reserved.
victaulic.com
4.1 DIMENSIONS (Continued)
Series 867–7UL, 867-7UF, 867-759
SizeFlanged ANSI Class 300
Dimensions Weight9
Nominal
Actual Outside Diameter L W R La ha Hy Ha
Y Approx.
(Each)
A Approx.
(Each)inches
DNinches mm
inches mm
inches mm
inches mm
inches mm
inches mm
inches mm
inches mm
lb kg
lb kg
1 ½ 1.9 8.3 6.5 3.1 4.9 3.3 9.4 8.9 27 25DN40 48.3 210 165 78 124 85 239 227 12.2 11.5
2 2.375 8.3 6.5 3.3 4.9 3.3 9.6 8.9 27 25DN50 60.3 210 165 83 124 85 244 227 12.2 11.5
2 ½ 2.875 8.7 7.3 3.7 5.9 4.3 10.1 9.9 33 3073 222 185 95 149 109 257 251 15 13.5
3 3.5 10.4 8.1 4.1 6.3 4.3 12.4 11.3 55 51DN80 88.9 264 207 105 159 109 314 287 25 23
4 4.5 13.2 9.8 5 7.9 5.3 14.9 13.8 95 90DN100 114.3 335 250 127 200 127 378 650 43 41
6 6.625 17 12.6 6.3 9.2 6.5 20 17.9 187 179DN150 168.3 433 320 159 234 165 508 454 85 81
9 Weight based on standard ASTM A536 65-45-12 Ductile Iron Body
SizeThreaded NPT or BSP Ports - All End Connections
Dimensions Dimensions
Nominal
Actual Outside Diameter L W R La ha Hy Ha a10 b10 c10
d11
(optional)Control
Volume12
inches DN
inches mm
inches mm
inches mm
inches mm
inches mm
inches mm
inches mm
inches mm
inches mm
inches mm
inches mm
inches mm
gallons liters
1 ½ 1.9 – – – – – – – 0.5 0.5 0.75 0.75 0.04DN40 48.3 15 15 20 20 0.13
2 2.375 6.1 15 1.6 4.8 3.3 12.3 15.6 0.5 0.5 0.75 0.75 0.04DN50 60.3 155 382 40 120 82 312 394 15 15 20 20 0.13
2 ½ 2.875 8.4 15 1.9 5.5 4 12.3 16.3 0.5 0.5 0.75 1.5 0.0473 212 382 48 140 102 312 414 15 15 20 40 0.125
3 3.5 9.8 16.1 42 6 4.5 14.5 19 0.5 0.5 0.75 1.5 0.08DN80 88.9 250 414 110 152 114 364 478 15 15 20 40 0.3
4 4.5 – – – – – – – 0.5 0.5 0.75 2 0.12DN100 114.3 15 15 20 50 0.45
6 6.625 – – – – – – – 0.5 0.5 2 2 0.57DN150 168.3 15 15 50 50 2.15
8 8.625 – – – – – – – 0.5 0.5 2 2 1.19DN200 219.1 15 15 50 50 4.5
10 10.75 – – – – – – – 0.5 0.5 2 2 2.25DN250 273 15 15 50 50 8.5
12 12.75 – – – – – – – 0.5 0.5 2 2 3.28DN300 323.9 15 15 50 50 12.4
14 14 – – – – – – – 0.5 0.5 2 2 3.28DN350 355.6 15 15 50 50 12.4
16 16 – – – – – – – 0.5 0.5 2 2 7.88DN400 406.4 15 15 50 50 29.9
10 (a), (b), (c) are NPT Thread ports 11 (d) is BSPT threaded optional drain port 12 (Control Volume) is Control Chamber Displacement Volume of Liquid pushed when valve opens
dL & LG
a
cb
a
b
c
b
cLa
a
cb
a
Hy
R
W
Ha
ha
dL & LG
a
cb
a
b
c
b
cLa
a
cb
a
Hy
R
W
Ha
ha
9
victaulic.com
30.93 8614 Rev C Updated 11/2016 © 2016 Victaulic Company. All rights reserved.
victaulic.com
4.2 DIMENSIONS
Series 867-42T, 867-43T
H
RG
W
a
RF
H
d
aa
da
d
a
a
da
RT
H
d
a
a
da
LF LG
LT
H
RG
W
a
RF
H
d
aa
da
d
a
a
da
RT
H
d
a
a
da
LF LG
LT
H
RG
W
a
RF
H
d
aa
da
d
a
a
da
RT
H
d
a
a
da
LF LG
LT
H
RG
W
a
RF
H
d
aa
da
d
a
a
da
RT
H
d
a
a
da
LF LG
LT
Flanged ANSI Class 150 Flanged ANSI Class 300
Nominal
Actual Outside Diameter LF RF H W Weight LF RF H W Weight
inches DN
inches mm
inches mm
inches mm
inches mm
inches mm
lb kg
inches mm
inches mm
inches mm
inches mm
lb kg
1 ½ 1.9 9.06 2.56 4.93 5.99 21 9.06 3.11 4.93 5.99 26DN40 48.3 230 65 125 152 9.4 230 78 125 152 11.8
2 2.375 9.06 3.03 4.93 5.99 24 9.25 3.38 4.93 5.99 28DN50 60.3 230 77 125 152 10.8 235 86 125 152 12.72 1/2 2.875
– – – – – – – – – –
3 3.5 12.21 4.18 6.03 9.73 56 12.84 4.17 6.03 9.73 67DN80 88.9 310 106 153 247 25.5 326 106 153 247 30.2
4 4.5 13.79 4.77 6.42 10.4 78 14.5 5.01 6.42 10.4 95DN100 114.3 350 121 163 264 35.5 368 129 163 264 42.9
6 6.625 18.91 5.79 9.14 14.66 174 19.94 6.37 9.14 14.66 217DN160 168.3 480 147 232 372 78.8 506 162 232 372 98.6
8 8.625 23.64 7.09 11.82 19.31 313 24.66 7.59 11.82 19.31 357DN200 219.1 600 180 300 490 142 626 193 300 490 162
10 10.75 28.76 8.04 11.82 19.31 379 28.76 8.89 11.82 19.31 459DN250 273 730 204 300 490 172 730 226 300 490 208
Grooved (OGS) Threaded All
Nominal
Actual Outside Diameter LG RG H W Weight LT RT H W Weight a d
inches DN
inches mm
inches mm
inches mm
inches mm
inches mm
lb kg
inches mm
inches mm
inches mm
inches mm
lb kg
inches mm
inches mm
1 ½ 1.9 9.06 0.95 4.93 5.99 15 9.06 1.18 4.93 5.99 16.06 0.5 0.75DN40 48.3 230 24.1 125 152 6.8 230 30 125 152 7.3 21.3 26.9
2 2.375 9.06 1.19 4.93 5.99 16– – – – –
0.5 0.75DN50 60.3 230 30.2 125 152 7.1 21.3 26.92 1/2 2.875 9.25 1.44 4.93 5.99 20
– – – – –0.5 0.75
235 37 125 152 9.1 21.3 26.93 3.5 12.21 1.75 6.03 9.73 40
– – – – –0.5 1.5
DN80 88.9 310 44.5 153 247 18 21.3 48.34 4.5 13.79 2.25 6.42 10.4 53
– – – – –0.5 2
DN100 114.3 350 57.2 163 264 23.9 21.3 60.36 6.625 18.91 3.31 9.14 14.66 153
– – – – –0.5 2
DN160 168.3 480 84.2 232 372 69.6 21.3 60.38 8.625 23.64 4.33 11.82 19.31 275
– – – – –0.5 2
DN200 219.1 600 110 300 490 125 21.3 60.310 10.75
– – – – – – – – – –0.5 2
DN250 273 21.3 60.3
10
victaulic.com
30.93 8614 Rev C Updated 11/2016 © 2016 Victaulic Company. All rights reserved.
victaulic.com
5.0 PERFORMANCE
Discharge Chart
Series 867-4UF
Maximum Flow Rates
Series 867-4UF
Valve Size inches mm
2 3 4 6 850 80 100 150 200
Maximum Flow gpm m3/h
250 500 1000 2500 500057 114 227 568 1136
11
victaulic.com
30.93 8614 Rev C Updated 11/2016 © 2016 Victaulic Company. All rights reserved.
victaulic.com
5.0 PERFORMANCE (Continued)
Pressure Fall-off Chart
Series 867-7UL
Maximum Flow Rates and Recommended Relief Valve Sizes
Series 867-7UL
Valve Size inches mm
1½ 2 2½ 3 4 6 8 10 1240 50 65 80 100 150 200 250 300
Maximum Flow gpm LPM
80 150 150 500 800 1800 4000 6000 850018 34 34 114 182 409 908 1362 1920
Relief Valve Size inches mm
½ ½ ½ 1½ 2 2 3 4 2 x 412 12 12 40 50 50 80 100 2X100
Discharge Chart
Series 867-7UF
12
victaulic.com
30.93 8614 Rev C Updated 11/2016 © 2016 Victaulic Company. All rights reserved.
victaulic.com
5.0 PERFORMANCE (Continued)
Flow Range and Recommended Relief Valve Size
Series 867-42T
Valve Size inches mm
1½ 2 2½ 3 4 6 8 1040 50 65 80 100 150 200 250
Flow Range gpm m3/h
20 – 106 20 – 172 20 – 247 20 – 360 20 – 640 20 – 1450 20 – 2570 45 – 40004 – 24 4 – 39 4 – 56 4 – 82 4 – 145 4 – 330 4 – 580 10 – 910
Relief valve Recommended Size
inches mm
¾ ¾ 1½ 1½ 2 3 3 420 20 40 40 50 80 80 100
NOTE• For pressure fall-off charts please see Victaulic.
• Must be installed with a minimum of ½" relief valve for FM Approved installations
Discharge Chart
Series 867-43T
13
victaulic.com
30.93 8614 Rev C Updated 11/2016 © 2016 Victaulic Company. All rights reserved.
victaulic.com
5.1 PERFORMANCE
Flow Chart
Series 867–400, 867-4UF, 867-459
Flow Chart
Series 867–7UL, 867–7UF, 867–759
FLOW RATE – GPM / m3/h
P
RE
SS
UR
E D
RO
P –
PS
I / B
ar
0.01
0.05
0.1
0.5
1.0
0.15
0.25
0.50
0.75
1.00
1.25
1.50
2.50
5.00
7.50
10.00
12.5015.00
5 10 20 30 40 50 100 200 300 500 1,000 20 30 40 50 75 100 500 1,000 5,000
1½"/4
0mm
2"/5
0mm
2½"/6
5mm
3"/8
0mm
4"/10
0mm
6"/1
50mm
8"/2
00mm
10"/2
50mm
12"/3
00mm
FLOW RATE – GPM / m3/h
PR
ES
SU
RE
DR
OP
– P
SI
/ Bar
50 75 100 250 500 750 1,000 2,500 5,000 7,500 10,000 15,000 20,00010 50 100 500 1,000 5,000
15.0
12.5
10.0
7.5
5.0
2.5
1.5
1.0
0.5
0.1
1½"/4
0mm
2"/50m
m2½
"/65m
m
3"/80m
m
4"/100mm
6"/150
mm
8"/200
mm
10"/2
50mm
12"/3
00mm
14"/3
50mm
16"/4
00mm
14
victaulic.com
30.93 8614 Rev C Updated 11/2016 © 2016 Victaulic Company. All rights reserved.
victaulic.com
5.1 PERFORMANCE (Continued)
Flow Chart
Series 867-42T, 867-43T
FLOW RATE – GPM / m3/h
PR
ES
SU
RE
DR
OP
– P
SI
/ Bar
15
10987654
3
2
10.90.80.70.60.5
0.4
0.3
0.2
0.120
0.01
0.02
0.03
0.04
0.050.060.070.080.09
0.1
0.2
0.3
0.4
0.50.60.70.80.91.0
5 10 20 30 40 50 100 200 300 400 500 1000 2000 300030 40 50 70 100 200 300 400 500 700 1000 2000 3000 4000 5000 7000 10000 15000
1½"/4
0mm
2"/5
0mm
4"/1
00m
m
6"/1
50m
m8"
/200
mm
10"/2
50m
m
3"/8
0mm
2½"/7
3mm
15
victaulic.com
30.93 8614 Rev C Updated 11/2016 © 2016 Victaulic Company. All rights reserved.
victaulic.com
5.2 PERFORMANCE
Series 867–400, 867-4UF, 867-459
CV Values:
CV values for flow of water at +60°F/+16°C through a fully open valve are shown in the table below.
Formulas for CV and KV values
Frictional Resistance
The chart below expresses the frictional resistance of Victaulic Series 867-400, 867-4UF, and 867-459 Pressure Reducing and Pressure Relief Valves in equivalent feet of straight pipe.
Valve Size Full Open
Equivalent Length of
Pipe
Nominal Size
Actual Outside Diameter Flow Coefficient
inches DN
inches mm
Cv Kv
feet meters
1 ½ 1.9 66 30DN40 48.3 57 9.1
2 2.375 66 30DN50 60.3 57 9.12 ½ 2.875 90 40
73 78 12.13 3.5 157 45
DN80 88.9 136 13.74 4.5 236 46
DN100 114.3 204 146 6.625 529 90
DN150 168.3 458 27.48 8.625 902 150
DN200 219.1 781 45.810 10.75 957 354
DN250 273 829 10812 12.75 2231 187
DN300 323.9 1932 57
Where:
or
Flow Coefficient Cv Kv
Q (Flow) GPM m3/hr
ΔP (Pressure Drop) psi bar
∆P = Q2
Cv2
Q = Cv x ∆P
Where:Q = Flow (GPM)∆P = Pressure Drop (psi)Cv = Flow Coe�cient
Q = Flow (m3/hr)∆P = Pressure Drop (Bar)K
v = Flow Coefficient
Where:
16
victaulic.com
30.93 8614 Rev C Updated 11/2016 © 2016 Victaulic Company. All rights reserved.
victaulic.com
5.3 PERFORMANCE
Series 867–7UL, 867-7UF, 867-759
CV Values:
CV values for flow of water at +60°F/+16°C through a fully open valve are shown in the table below.
Formulas for CV and KV values
Frictional Resistance
The chart below expresses the frictional resistance of Victaulic Series 867-7UL, 867-7UF, and 867-759 Pressure Reducing and Pressure Relief Valves in equivalent feet of straight pipe.
Valve Size Full Open
Equivalent Length of
Pipe
Nominal Size
Actual Outside Diameter Flow Coefficient
inches DN
inches mm
Cv Kv
feet meters
1 ½ 1.9 58 33.8DN40 48.3 50 10.3
2 2.375 58 33.8DN50 60.3 50 10.32 ½ 2.875 64 109.5
73 55 33.43 3.5 133 70.8
DN80 88.9 115 21.64 4.5 230 75.6
DN100 114.3 200 236 6.625 530 123.0
DN150 168.3 460 37.58 8.625 940 176.9
DN200 219.1 815 53.910 10.75 1440 229.5
DN250 273 1250 7012 12.75 2140 280.8
DN300 323.9 1850 85.614 14 2300 524.5
DN350 355.6 1990 159.916 16 3820 369.6
DN400 406.4 3310 112.7
Where:
or
Flow Coefficient Cv Kv
Q (Flow) GPM m3/hr
ΔP (Pressure Drop) psi bar
∆P = Q2
Cv2
Q = Cv x ∆P
Where:Q = Flow (GPM)∆P = Pressure Drop (psi)Cv = Flow Coe�cient
Q = Flow (m3/hr)∆P = Pressure Drop (Bar)K
v = Flow Coefficient
Where:
17
victaulic.com
30.93 8614 Rev C Updated 11/2016 © 2016 Victaulic Company. All rights reserved.
victaulic.com
5.4 PERFORMANCE
Series 867-42T, 867-43T
CV Values:
CV values for flow of water at +60°F/+16°C through a fully open valve are shown in the table below.
Formulas for CV and KV values
Frictional Resistance
The chart below expresses the frictional resistance of Victaulic Series 867-42T and 867-43T Pressure Reducing and Pressure Relief Valves in equivalent feet of straight pipe.
Valve Size Full Open
Equivalent Length of
Pipe
Nominal Size
Actual Outside Diameter Flow Coefficient
inches DN
inches mm
Cv Kv
feet meters
1 ½ 1.9 79 7DN40 48.3 68 2
2 2.375 92 16DN50 60.3 80 52 ½ 2.875 116 28
73 100 8.63 3.5 219 23
DN80 88.9 190 74 4.5 398 30
DN100 114.3 345 96 6.625 912 49
DN150 168.3 790 158 8.625 1160 89
DN200 219.1 1160 2710 10.75 1662 203
DN250 273 1355 62
Where:
or
Flow Coefficient Cv Kv
Q (Flow) GPM m3/hr
ΔP (Pressure Drop) psi bar
∆P = Q2
Cv2
Q = Cv x ∆P
Where:Q = Flow (GPM)∆P = Pressure Drop (psi)Cv = Flow Coe�cient
Q = Flow (m3/hr)∆P = Pressure Drop (Bar)K
v = Flow Coefficient
Where:
18
victaulic.com
30.93 8614 Rev C Updated 11/2016 © 2016 Victaulic Company. All rights reserved.
victaulic.com
User Responsibility for Product Selection and SuitabilityEach user bears final responsibility for making a determination as to the suitability of Victaulic products for a particular end-use application, in accordance with industry standards and project specifications, and the applicable building codes and related regulations as well as Victaulic performance, maintenance, safety, and warning instructions. Nothing in this or any other document, nor any verbal recommendation, advice, or opinion from any Victaulic employee, shall be deemed to alter, vary, supersede, or waive any provision of Victaulic Company's standard conditions of sale, installation guide, or this disclaimer.
Intellectual Property RightsNo statement contained herein concerning a possible or suggested use of any material, product, service, or design is intended, or should be constructed, to grant any license under any patent or other intellectual property right of Victaulic or any of its subsidaries or affiliates covering such use or design, or as a recommendation for the use of such material, product, service, or design in the infringement of any patent or other intellectual property right. The terms “Patented” or “Patent Pending” refer to design or utility patents or patent applications for articles and/or methods of use in the United States and/or other countries.
NoteThis product shall be manufactured by Victaulic or to Victaulic specifications. All products to be installed in accordance with current Victaulic installation/assembly instructions. Victaulic reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligations.
InstallationReference should always be made to the Victaulic installation handbook or installation instructions of the product you are installing. Handbooks are included with each shipment of Victaulic products, providing complete installation and assembly data, and are available in PDF format on our website at www.victaulic.com.
WarrantyRefer to the Warranty section of the current Price List or contact Victaulic for details.
TrademarksVictaulic and all other Victaulic marks are the trademarks or registered trademarks of Victaulic Company, and/or its affiliated entities, in the U.S. and/or other countries.
6.0 NOTIFICATIONS
WARNING
• Read and understand all instructions before attempting to install, remove, adjust, or maintain any Victaulic piping products.
• Depressurize and drain the piping system before attempting to install, remove, adjust, or maintain any Victaulic piping products.
• Wear safety glasses, hardhat, and foot protection.
Failure to follow these instructions could result in death or serious personal injury and property damage.
7.0 REFERENCE MATERIALS10.64: Victaulic® Firelock™ Rigid Coupling Style 009N
I-100: Field Installation Handbook
I-009N: Field Installation and Maintenance Style 009N
29.01: Terms and Conditions
I-867-7UL: Installation, Operation and Maintenance Manual Series 867-7UL
I-867-7UF: Installation, Operation and Maintenance Manual Series 867-7UF
I-867-4UF: Installation, Operation and Maintenance Manual Series 867-4UF
I-867-42T: Installation, Operation and Maintenance Manual Series 867-42T
I-867-43T: Installation, Operation and Maintenance Manual Series 867-43T
19
victaulic.com