View All - standardsactivities.csa.ca · Commentaire sur CSA S157-17, Calcul de la résistance...

Browse By Group:

Last updated: March 2, 2018

View All

New Publications | Supplements | Amendments | Errata | Endorsements | Reaffirmations | Withdrawals | Current List of Endorsed Standards | Formal Interpretations | Informs & Certification Notices | Previous Reports

New Publications

This section lists new standards, new editions (including adoptions), and special publications that have been recently published. Clicking on "View Detail" will display the scope of the document and other details available on CSA’s Online store.Program Standard Title Date Posted ScopeEnergy Z245.1-18 Steel pipe 3/2/2018 View Detail

Energy N285.8-15 Exigences techniques relatives à l’évaluation en service des tubes de force en alliage de zirconium dans les réacteursCANDU

3/2/2018 View Detail

Life Sciences CAN/CSA-Z314-18 Canadian medical device reprocessing This is a National Standard of Canada.


Construction Products and Materials

W48-18 Métaux d'apport et matériaux connexes pour le soudage à l'arc 2/26/2018 View Detail

Life Sciences Z259.2.2-17 Dispositifs autorétractables 2/26/2018 View Detail

Page 1 of 21Current Standards Activities

3/2/2018https://standardsactivities.csa.ca/recent_infoupdate.asp

Electrical / Electronics C22.2 NO. 164-18 Electric sauna heating equipment 2/21/2018 View Detail


S157-17/S157.1-17 Calcul de la résistance mécanique des éléments en aluminium / Commentaire sur CSA S157-17, Calcul de la résistance mécanique des éléments en aluminium


Life Sciences Z1010-18 Management of work in extreme conditions This is a National Standard of Canada


Energy Z5000-18 Building commissioning for energy using systems This is a National Standard of Canada

2/21/2018

Energy ANSI LC 1-2018/CSA 6.26-2018

Fuel gas piping systems using corrugated stainless steel tubing 2/15/2018 View Detail

Life Sciences B354.10-17/B354.11-17 Usage sécuritaire et meilleures méthodes pour les plates-formes de travail se déplaçant le long de mâts (MCWP) / Formation reliée aux plates-formes de travail se déplaçant le long de mâts (MCWP)


Life Sciences B354.12-17 Conception, calculs, exigences relatives à la sécurité et méthodes d’essai pour les plates-formes de transport se déplaçant le long de mâts (MCTP)


Life Sciences B354.13-17/B354.14-17 Usage sécuritaire et meilleures méthodes pour les plates-formes de transport se déplaçant le long de mâts (MCTP) / Formation reliée aux plates-formes de transport se déplaçant le long de mâts (MCTP)


Life Sciences B354.9-17 Conception, calculs, exigences relatives à la sécurité et méthodes d’essai pour des plates-formes de travail élévatrices(MCWP)


Energy SPE-2.1 SERIES-18 Best practices for defueling, decommissioning, and disposal of compressed natural gas vehicle fuel containers and liquefied natural gas vehicle fuel tanks


Life Sciences Z91-17 Règles de santé et de sécurité pour le travail sur équipement suspendu


Electrical / Electronics CAN/CSA-IEC 61000-6-5:18

Electromagnetic compatibility (EMC) — Part 6-5: Genericstandards — Immunity for equipment used in power station and substation environment (Adopted IEC 61000-6-5:2015, first edition, 2015-08)Compatibilité électromagnétique (CEM) — Partie 6-5 : Normesgénériques — Immunité pour les équipements utilisés dans les




environnements de centrales électriques et de postes (norme IEC 61000-6-5:2015 adoptée, première édition, 2015-08)

Electrical / Electronics CAN/CSA-C22.2 NO. 61010-2-034:18

Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-034: Particularrequirements for measurement equipment for insulation resistance and test equipment for electric strength(Adopted IEC 61010-2-034:2017, first edition, 2017-01, with Canadian deviations) | Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire —Partie 2-034: Exigences particulières applicables aux appareils de mesure de la résistance d’isolement et aux appareils d’essai de rigidité diélectrique (norme IEC 61010-2-034:2017 adoptée, première édition, 2017-01, avec exigences propres au Canada)


Electrical / Electronics CAN/CSA-C22.2 No. 61010-2-201:18

Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-201: Particularrequirements for control equipment (IEC 61010-2-201:2017,MOD)Exigences de sécurité pour appareils électriques de mesurage,de régulation et de laboratoire — Partie 2-201 : Exigences articulières pour les équipements de commande (IEC 61010-2-201:2017, MOD)



Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-202: Particularrequirements for electrically operated valve actuators (Adopted IEC 61010-2-202:2016, first edition, 2016-07)Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire — Partie 2-202 : Exigences particulières pour les actionneurs à vanne à commande électrique (norme IEC 61010-2-202:2016 adoptée, première édition, 2016-07)



Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-21: Particularrequirements for hand-held drain cleaners(Binational standard with UL 62841-2-21)



Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses — Sécurité — Partie 2-21 : Exigencesparticulières pour les furets portatifs(norme binationale avec UL 62841-2-21)


Electrical / Electronics CAN/CSA-E60730-2-7:18 Automatic electrical controls — Part 2-7: Particular requirements for timers and time switches




(Adopted IEC 60730-2-7:2015, third edition, 2015-03, with Canadian deviations)

Electrical / Electronics CAN/CSA-IEC CISPR 16-2-3:18

Specification for radio disturbance and immunity measuringapparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements (Adopted IEC CISPR 16-2-3:2016, fourth edition, 2016-09) Spécifications des méthodes et des appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 2-3 : Méthodes demesure des perturbations et de l'immunité - Mesures des perturbations rayonnées (norme IEC CISPR 16-2-3:2016 adoptée, quatrième édition, 2016-09)


Energy C866-17 Rendement des luminaires à DEL 2/15/2018 View Detail

Electrical / Electronics C22.2 NO. 292-18 Dc arc fault protection for photovoltaic applications This is a National Standard of Canada.


Life Sciences B701HB-18 Helping worker-carers in your organization 1/31/2018 View Detail

Energy COLLECTION N290.0-17/N290.2-17

Contient N290.0-17, Exigences générales applicables auxsystèmes de sûreté des centrales nucléaires et N290.2-17, Exigences applicables aux circuits de refroidissement d'urgence du coeur des centrales nucléaires


Energy Z276-18 Gaz naturel liquéfié (GNL) : production, stockage et manutention


Energy CSA/ANSI NGV 4.1-2018 Natural gas vehicle (NGV) dispensing systems 1/30/2018 View Detail

Electrical / Electronics C22.2 NO. 188-18 Splicing wire connectors(Trinational standard with UL 486C and NXM-J- 548-ANCE)This is a National Standard of Canada


Electrical / Electronics C22.2 NO. 355-18 Sealed twist-on connecting devices This is a National Standard of Canada


Electrical / Electronics C22.2 NO. 38-18 Thermoset-insulated wires and cables(Trinational standard with UL 44 and ANCE NMX-J-451)This is a National Standard of Canada.


Life Sciences Z151-17 Pompes à béton et flèches de distribution 1/30/2018 View Detail

Energy ANSI Z21.97-2017/CSA 2.41-2017

Outdoor decorative gas appliances 1/25/2018 View Detail



Life Sciences Z7000-18 General requirements for quality management and safety in perioperative settings This is a National Standard of Canada.


Electrical / Electronics C22.2 NO. 31-18 Switchgear assemblies This is a National Standard of Canada.


Electrical / Electronics CAN/CSA-C22.2 NO. 4248.12-18

Fuseholders - Part 12: Class R (Trinational standard with UL 4248-12 and NMX-J-009/4248/12-ANCE)



W48-18 Filler metals and allied materials for metal arc welding 1/23/2018 View Detail

Life Sciences CAN/CSA-Z1001-18 Occupational health and safety training 1/23/2018 View Detail

Life Sciences Z11-18 Portable ladders 1/23/2018 View Detail

Energy ANSI Z21.58-2018/CSA1.6-2018

Outdoor cooking gas appliances 1/22/2018 View Detail

Energy ANSI Z21.74-2017 Portable refrigerators 1/22/2018 View Detail

Electrical / Electronics C22.1HB-18 2018 Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part 1


Energy C439-18 Laboratory methods of test for rating the performance of heat/energy-recovery ventilators


Energy CSA NGV 4.3-2018 Temperature compensation guideline for compressed naturalgas vehicle fueling



AAMA/WDMA/CSA 101/I.S.2/A440-17

North American Fenestration Standard / Specification forwindows, doors, and skylightsThis is a National Standard of Canada.


Electrical / Electronics C22.2 NO. 127-18 Equipment and lead wires 1/15/2018 View Detail

Electrical / Electronics C22.2 NO. 159-18 Plugs, connectors, receptacles, and similar wiring devices for use in hazardous locationsThis is a National Standard of Canada.


Electrical / Electronics C22.2 NO. 96.2-18 Flexible power cables for wind turbine applications rated up to 35 kV


Electrical / Electronics C22.1RG-18 Electrical Quick Reference, based on 2018 CE Code, Part IHard Copy only.

1/10/2018

Electrical / Electronics C22.2 NO. 137-18 Electric luminaires for use in hazardous locations 1/9/2018 View Detail



This is a National Standard of Canada.

Electrical / Electronics C22.2 NO. 22-18 Electrical equipment for flammable and combustible fuel dispensersThis is a National Standard of Canada.


Electrical / Electronics C22.2 NO. 52-17 Underground secondary and service-entrance cables 1/9/2018 View Detail

Electrical / Electronics CSA/ANSI C22.2 NO. 336-17

Particular requirements for rechargeable battery-operatedcommercial robotic floor treatment machines with traction drivesThis is a National Standard of Canada.



B184 SERIES-17 Polymeric subsurface stormwater management structures 1/5/2018 View Detail


Household and similar electrical appliances – Safety – Part 2-67: Particular requirements for floor treatment machines, for commercial use(Binational standard with UL 60335-2-67)



Appareils électrodomestiques et analogues — Sécurité —Partie 2-67: Exigences particulières pour les machines de traitement des sols, à usage commercial (norme binationale avec UL 60335-2-67)


Energy B109-17 Code d'installation du gaz naturel pour les véhicules 1/5/2018 View Detail


B137.19-17 Black crosslinked polyethylene (PEX) piping systems for gas services


Electrical / Electronics C22.2 NO. 174-18 Cables and cable glands for use in hazardous locations This is a National Standard of Canada.


Life Sciences Z412-17 Office ergonomics — An application standard for workplace ergonomics


Life Sciences Z7396.1-17 Réseaux de distribution de gaz médicaux — Partie 1 : Canalisations pour les gaz médicaux, l’aspiration médicale, les gaz de soutien médical et les systèmes d’évacuation des gaz d’anesthésie


Life Sciences CAN/CSA-Z900.2.1-17 Tissues for assisted reproduction 1/5/2018 View Detail

Life Sciences CAN/CSA-Z900.2.1-17 Tissus destinés à la reproduction assistée 1/5/2018 View Detail

Communications /Information

CAN/CSA-IEC 62443-2-4:17

Security for industrial automation and control systems — Part 2-4: Security program requirements for IACS service providers (Adopted IEC 62443-2-4:2015, first edition, 2015-06)




Sécurité des automatismes industriels et des systèmes de commande — Partie 2-4 : Exigences de programme de sécuritépour les fournisseurs de service IACS (norme IEC 62443-2-4:2015 adoptée, première édition, 2015-06)

Electrical / Electronics Z462-18 Workplace electrical safety 1/5/2018 View Detail

Electrical / Electronics C22.1-18 2018 Canadian Electrical Code, Part I (24th edition), Safety Standard for Electrical InstallationsThis is a National Standard of Canada.


Electrical / Electronics IEEE 844.2-2017/CSA C293.2-17

Skin effect trace heating of pipelines, vessels, equipment, and structures—Application guide for design, installation, testing,commissioning, and maintenance


Electrical / Electronics C83-17 Communication and power line hardware 12/19/2017 View Detail

Energy ANSI Z21.103-2017 Unvented portable type gas camp heaters for indoor andoutdoor use


Energy Z276-18 Liquefied natural gas (LNG) - Production, storage, and handling 12/13/2017 View Detail

Energy ANSI Z21.88-2017/CSA 2.33-2017

Vented gas fireplace heaters 12/13/2017 View Detail

Electrical / Electronics C22.2 NO. 40-17 Junction and pull boxes 12/12/2017 View Detail

Energy N285.7-15 Inspection périodique des systèmes et des composants complémentaires des centrales nucléaires CANDU


Life Sciences Z1220-17 Trousses de secourisme en milieu de travail 12/12/2017 View Detail

Life Sciences Z248-17 Code for tower cranes 12/12/2017 View Detail


Household and similar electrical appliances — Safety — Part 2-80: Particular requirements for fans(Adopted IEC 60335-2-80:2015, third edition, 2015-04, with Canadian deviations)


Electrical / Electronics CAN/CSA-C60079-30-2:17

Explosive atmospheres — Part 30-2: Electrical resistance trace heating — Application guide for design, installation and maintenance (Adopted IEC/IEEE 60079-30-2:2015, first edition, 2015-09, with Canadian deviations)


Life Sciences CAN/CSA-ISO/TS 17665-3:17

Sterilization of health care products — Moist heat — Part 3: Guidance on the designation of a medical device to a product




family and processing category for steam sterilization (Adopted ISO/TS 17665-3:2013, first edition, 2013-04-15)


Household and similar electrical appliances — Safety — Part 2-34: Particular requirements for motor-compressors (Binational standard with UL 60335-2-34)



Appareils électrodomestiques et analogues — Sécurité —Partie 2-34 : Exigences particulières pour les motocompresseurs(norme binationale avec UL 60335-2-34)


Supplements

Supplements are issued periodically for some standards. This section lists those recently published.Program Standard Title Date Posted Scope

No activity to report

Amendments

Amendments are issued periodically for some standards. This section lists those recently published. If not registered for the CSA Standards Update Service, Register NowProgram Standard Title Date Posted ScopeLife Sciences CAN/CSA-Z627-16,

Update No. 1 Breath alcohol ignition interlock devicesClauses 5.3.14.5, 7.1.2, 7.2, 7.7.4, 8.3.1.3, 8.3.5.1, 8.4.2.1, 8.4.4.2.6, 8.5.2.1, 8.5.3.1, 8.5.4.1, 8.6.5.1, 8.6.7.3.1, 8.6.12.9, and 8.7.1Table 3

2/26/2018

Life Sciences CAN/CSA-Z627-16, Mise à jour nº1

Antidémarreurs avec éthylomètreArticles 2, 5.3.14.5, 7.1.2, 7.2, 8.3.1.3, 8.3.5.1, 8.4.2.1, 8.4.4.2.6, 8.5.2.1, 8.5.3.1, 8.5.4.1, 8.6.5.1, 8.6.12.9 et 8.7.1Tableau 3

2/26/2018

Electrical / Electronics C22.2 No. 144.1-16, Update No. 1

Ground-fault circuit interruptersRevised Cover, copyright page, Preface, Clauses 5.15.5, 6.27.1.1, 6.27.2, and 6.31.2,Table 6.4, and Annex ANew Clauses 3.13A, 3.16A, and 5.17

2/26/2018

Gas Equipment 2017 ONTARIO B149-15 2017 ONTARIO B149-15 CODE AMENDMENTS - 2017 Ontario 2/21/2018



CODE AMENDMENTS Amendments to the 2015 B149 Codes Amendment 1 - B149.3-15 inserts

Electrical / Electronics C22.2 NO. 1691-12 (R2016), Update No. 3

Single pole locking-type separable connectorsRevised Cover, copyright page, Preface, Clauses 6.2.1 and6.12.2, and Figures B1.1 andB1.2New Clauses 5.2.1.1, 5.3.10.1, and 6.12.1.1 and Table 4A

2/15/2018


S406-16, Mise à jour nº1 Spécification visant les fondations permanentes en bois pour les maisons et petits bâtimentsArticles 5.7 et 5.11Tableaux 3A, 3B, 5A, 5B, 5C, 5D, 5E, 5F, 5G, 5H, 5I, 5J, 5K, 5L, 10A, 10B, 10C, 10D, 10E, 10F, 10G, 10H, 10I, 10J, 10K, 10L et A.12

2/15/2018

Electrical / Electronics CAN/CSA-C22.2 NO. 60601-2-19A-09 -Amendment 1:2018 to CAN/CSA-C22.2 NO. 60601-2-19-09

Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators (Adopted amendment 1:2016 to IEC 60601-2-19:2009)Modification 1:2018 de CAN/CSA-C22.2 NO. 60601-2-19-09, Appareils électromédicaux - Partie 2-19: Exigences particulières pour la sécurité de base et les performances essentielles des incubateurs pour nouveau-nés (Amendement 1:2016 adoptée de la norme CEI 60601-2-19:2009)

2/15/2018

Electrical / Electronics CAN/CSA-C22.2 NO. 60601-2-21A-10 -Amendment 1:2018 to CAN/CSA-C22.2 NO. 60601-2-21-10

Medical electrical equipment - Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers (Adopted amendment 1:2016 to IEC 60601-2-21:2009)Modification 1:2018 de CAN/CSA-C22.2 NO. 60601-2-21-10, Appareils électromédicaux - Partie 2-21: Exigences particulières pour la sécurité de base et les performances essentielles des incubateurs radiants pour nouveau-nés (Amendement 1:2016 adoptée de la norme IEC 60601-2-21:2009)

2/15/2018

Life Sciences CAN/CSA-CEI/IEC 62304A:14 - Amendment 1:2018 to CAN/CSA-CEI/IEC 62304:14

Medical device software - Software life cycle processes (Adopted amendment 1:2015 to CEI/IEC 62304:2006, first edition, 2006-05)Modification 1:2018 de CAN/CSA-CEI/IEC 62304:14, Logiciels de dispositifs médicaux - Processus du cycle de vie du logiciel (Amendement 1:2018 adoptée de la norme CEI/IEC62304:2006)

2/15/2018

Life Sciences CAN/CSA-Z902-15, Update No. 1

Blood and blood components Clauses 10.6.1.3, 10.6.3.2, 10.6.3.3, and 10.9.1.8

1/25/2018



Life Sciences CAN/CSA-Z902-15, Mise à jour nº1

Sang et produits sanguins labilesArticles 0, 1.3, 3.1, 4.3.3.3, 5.1.8, 5.2.4.2, 9.1.1, 9.1.2, 9.2.3, 9.3, 9.4.3, 9.5.2.5, 9.5.2.8, 10.1.2, 10.2.4, 10.2.5, 10.2.6, 10.2.7, 10.3.3, 10.4, 10.6.1.3, 10.6.3, 10.6.3.2, 10.6.3.3, 10.7.2, 10.8.2, 10.8.3, 10.9, 11.1.2, 11.2, 11.3.1, 11.4.7, 12.1.3, 12.3.1.2, 12.3.1.3, 12.4.1, 12.5.1, 12.5.10, 14, 16.2.5, 16.3.2, 16.3.4, 16.5.1, 17.1.1, 17.1.5, 17.2.2, 17.3, 17.4, 17.7, 18.1.1, 18.2.1,18.4.1, 18.5.2, 19.1.5, 19.2.1, 19.3.3, 19.3.4, 20.1.12, 20.6.3.3,20.6.4.2, 21.2.3, 21.3.1, 21.5.1, 21.6.5, 21.6.6, 23.1.3 et 23.4.1Annexe A

1/25/2018

Electrical / Electronics C22.2 NO. 291-14, Update No. 2

Bare and covered ferrules (Bi-national standard, with UL 486F) Revised Cover, copyright page, Preface, and Clauses 1.3 and6.3.1

1/15/2018

Electrical / Electronics Amendment 2:2018 (MOD) to CAN/CSA-C22.2 No. 60601-2-44:10 (R2015)

Medical electrical equipment — Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomographyAppareils électromédicaux — Partie 2-44 : Exigences particulières pour la sécurité de base et les performances essentielles des équipements à rayonnement X de tomodensitométrie(IEC 60601-2-44:2009, IDT)

1/5/2018

Electrical / Electronics Amendment 1:2018 (IDT) to CAN/CSA-IEC CISPR20:08 (R2013)

Sound and television broadcast receivers and associated equipment — Immunity characteristics — Limits and methods ofmeasurementRécepteurs de radiodiffusion et de télévision et équipements associés — Caractéristiques d’immunité — Limites et méthodesde mesure(IEC CISPR 20:2006, IDT)

1/5/2018

Electrical / Electronics C22.2 NO. 248.12-11 (R2016)

Low-voltage fuses - Part 12: Class R fuses(Tri-national standard, with UL 248-12 and NMX-J-009/248/12-ANCE)

Revised Cover, copyright page, Preface, Clause 5.3, and Table A

12/21/2017

Electrical / Electronics Amendment 1:2018 to CAN/CSA-C22.2 No.60601-2-10:14

Medical electrical equipment — Part 2-10: Particular requirements for the basic safety and essential performance ofnerve and muscle stimulatorsAppareils électromédicaux — Partie 2-10 : Exigences particulières pour la sécuritéde base et les performances essentielles des stimulateurs de nerfs et de muscles

12/21/2017



Electrical / Electronics C22.2 NO. 184.1-15, Update No. 1

Solid-state dimming controls (Bi-national standard with UL1472)Revised Cover, copyright page, Clauses 5.2.2.3, 5.2.3.2,5.2.3.3, 5.2.3.5, 5.10.2, and 7.1.8, Tables 13, 14, 15, and Figures 4 and 6New Clause 7.1.8.1

12/12/2017

Energy N292.5-11 (C2016) Ligne directrice sur l’exemption ou la libération du contrôle réglementaire des matières contenant ou susceptibles de contenir des substances nucléaires Articles 2, 3, 5.1.3, 7.2.1, 7.6.3, 7.6.4, 8.1.3, 8.3.2, 8.3.3 et A.2Annexes D et E

12/7/2017

Errata

Errata are issued periodically for some standards. This section lists those recently published. If not registered for the CSA Standards Update Service, Register NowProgram Standard Title Date Posted ScopeEnergy N285.0-12/N285.6

SERIES-12, Update No 3 General requirements for pressure-retaining systems andcomponent s in CANDU nuclear power plants/Material Standards for reactor components for CANDU nuclear power plantsRevised N285.0-12: Clause 7.4.2 and N285.6.6.7-12: Table 2

3/2/2018

Energy N285.0-12/N285.6 Série-12, Mise à jour no 3

Exigences générales relatives aux systèmes et aux composants sous pression des centrales nucléaires CANDU/Normes sur lesmatériaux des composants de réacteurs des centrales nucléaires CANDUModification N285.0-12 : Articles 7.3.3, 7.4.2, 7.4.3 et 7.6.1.1

3/2/2018

Electrical / Electronics C22.2 No. 206-17 Lighting polesErrata to Clauses 7.4 and 7.5

3/1/2018

Life Sciences CAN/CSA-Z1630-17 Community paramedicine: Framework for program developmentErrata to Technical Committee

2/20/2018

Life Sciences CAN/CSA-Z1630-17 Paramédecine communautaire : cadre d’application pour l’élaboration d’un programmeErrata et Comité technique

2/20/2018

Electrical / Electronics CAN/CSA-C22.2 No. 250.13-17

Light emitting diode (LED) equipment for lighting applicationsErrata to Clauses 2 and A.10, Annex F

2/20/2018

Energy CAN/CSA-B138.1- Portable oil-burning equipment — Packaged equipment 1/31/2018



17/CAN/CSA-B138.2-17 requirements/Installation requirementsCAN/CSA-B138.1-17Clauses 5.3.3.3.2, 5.3.4.2.2, 5.3.4.4.1, and 10.3.4 and Figure 1CAN/CSA-B138.2-17Clauses 1.3, 2, and 4.5.4

Energy CAN/CSA-B138.1-17/CAN/CSA-B138.2-17

Appareils de combustion au mazout portatifs — Exigences relatives aux équipements assemblés en usine/Exigences relatives à l'installationCAN/CSA-B138.1-17Articles 5.3.3.3.2, 5.3.4.2.2, 5.3.4.4.1 et 10.3.4 et Figure 1CAN/CSA-B138.2-17Articles 1.3, 2 et 4.5.4

1/31/2018

Energy N285.0-17/N285.6 Series-17

General requirements for pressure- retaining systems and components in CANDU nuclear power plants/ Material Standards for reactor components for CANDU nuclear power plantsErrata to Task Force A and Task Force BN285.0-17Clause 7.4.2N285.6.7-17Table 2

1/31/2018

Energy ANSI Z21.13-2017 • CSA4.9-2017

Gas-fired low pressure steam and hot water boilersErrata to Clause 6.2

1/31/2018

Electrical / Electronics C22.2 No. 61-16 Household cooking rangesChange to Clause 7.4.8

1/30/2018

Life Sciences CAN/CSA-Z317.13-17 Infection control during construction, renovation, and maintenance of health care facilitiesRevisions to Subcommittee and Clauses 3.1, 5.1.5, and 6.6.1.3

1/30/2018

Energy CAN/CSA-C742-15 Energy performance of automatic icemakers and ice storage binsErrata to Clauses 7.2.2

1/30/2018

Energy CAN/CSA-C742-15 Performances énergétiques des machines à glaçons automatiques et des réserves de glaçonsErrata to Article 7.2.2

1/30/2018

Electrical / Electronics C22.2 NO. 205-17 Signal equipmentRevision to Subcommittee on Standard Signal Equipment

1/3/2018

Electrical / Electronics C22.2 NO. 190-14 Capacitors for power factor correctionRevision to Clause 10.4.4.1

1/3/2018



Energy B149.3-15, Update No. 1 Code for the field approval of fuel-related components onappliances and equipmentRevised Clause 9.4.1

12/15/2017

Endorsements

This section lists endorsed standards, which are standards that have been developed by another standards development organization and approved by the appropriate CSA Technical Committee for use in Canada. Endorsed standards are not sold by CSA. Program Standard Title Date Posted ScopeEnvironment ISO 14034:2016 Environmental management -- Environmental technology

verification (ETV)2/27/2018

Reaffirmations

The standards listed in this section have been reviewed to determine if they remain technically valid and have been reaffirmed as acceptable for useuntil the next edition is published or for a further five years (whichever comes first). Program Standard Title Date Posted ScopeConstruction Products and Materials

W59.2-M1991 (R2018) Welded Aluminum Construction 3/1/2018

Electrical / Electronics CAN/CSA-C838-13 (R2018)

Energy efficiency test methods for three-phase variable frequency drive systems

3/1/2018

Electrical / Electronics CAN/CSA-C802.1-13 (R2018)

Minimum efficiency values for liquid-filled distribution transformers

3/1/2018

Gas Equipment B140.0-03 (R2018) Oil-Burning Equipment: General Requirements 2/27/2018

Gas Equipment B140.12-03 (R2018) Oil-Burning Equipment: Service Water Heaters for Domestic Hot Water, Space Heating, and Swimming Pools

2/27/2018

Life Sciences Z180.1-13 (R2018) Compressed breathing air and systems 2/23/2018

Electrical / Electronics CAN/CSA-C191-13(R2018)

Performance of electric storage tank water heaters for domestic hot water service

2/21/2018

Electrical / Electronics CAN/CSA-C358-03 (R2018)

Energy Consumption Test Methods for Household ElectricRanges

2/21/2018

Electrical / Electronics CAN/CSA-E968-99 (R2018)

Self-Ballasted Lamps for General Lighting Services - SafetyRequirements

2/20/2018



(Adopted IEC 968:1988, first edition, including Amendment 1:1991, with Canadian deviations)


Capacitors for Use in Tubular Fluorescent and Other Discharge Lamp Circuits - General and Safety Requirements (Adopted IEC 1048:1991, first edition, 1991-02, including corrigendum 1992 and Amendment 1:1995, with Canadian deviations)

2/20/2018

Electrical / Electronics CAN/CSA-E61347-1-03 (R2018)

Lamp Controlgear - Part 1: General and Safety Requirements (Adopted CEI/IEC 61347-1:2000, first edition, 2000-10, with Canadian deviations)

2/20/2018

Electrical / Electronics CAN/CSA-E61347-2-3-03 (R2018)

Lamp Controlgear - Part 2-3: Particular Requirements for A.C. Supplied Electronic Ballasts for Fluorescent Lamps (Adopted CEI/IEC 61347-2-3:2000, first edition, 2000-10, with Canadian deviations)

2/20/2018

Life Sciences Z107.56-13 (R2018) Measurement of noise exposure 2/20/2018

Electrical / Electronics C22.2 NO. 65-13 (R2018)

Wire connectors (Tri-national standard, with UL 486A-486B and NMX-J-543-ANCE)

2/15/2018

Electrical / Electronics CAN/CSA-E60335-2-30:13 (R2018)

Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters (Adopted IEC/CEI 60335-2-30:2009, fifth edition, 2009-11, with Canadian deviations)

2/15/2018

Energy CAN/CSA-C828-13(R2018)

Performance requirements for thermostats used with individual room electric space heating devices

2/15/2018


Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks(Adopted IEC/CEI 60335-2-26:2002, edition 4:2002 consolidated with amendment 1:2008, with Canadian deviations)

2/15/2018


Automatic electrical controls for household and similar use -Part 2-10: Particular requirements for motor-starting relays(Adopted IEC 60730-2-10:2006, second edition, 2006-10, withCanadian deviations)

2/15/2018


Mechanical Safety of Cathode Ray Tubes (Adopted IEC 61965:2003, second edition, 2003-07)

2/15/2018

Electrical / Electronics C22.2 NO. 120-13 Refrigeration equipment 2/13/2018



(R2018)


Automatic Electrical Controls for Household and Similar Use -Part 2: Particular Requirements for Thermal Protectors for Ballasts for Tubular Fluorescent Lamps (Adopted IEC 730-2-3:1990, first edition)

2/13/2018


Automatic Electrical Controls for Household and Similar Use -Part 2: Particular Requirements for Energy Regulators (Adopted IEC 730-2-11:1993, first edition)

2/13/2018


Automatic Electrical Controls for Household and Similar Use -Part 2: Particular Requirements for Electrically Operated Door Locks(Adopted IEC 730-2-12:1993, first edition

2/13/2018


Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps(Adopted IEC 60335-2-41:2002, edition 3:2002 consolidated with amendment 1:2004 and amendment 2:2009), with Canadian deviations)

2/13/2018


Household and similar electrical appliances Safety - Part 2-43: Particular requirements for clothes dryers and towel rails(Adopted IEC/CEI 60335-2-43:2002, edition 3:2002 consolidated with amendment 1:2005 and amendment 2:2008, with Canadian deviations)

2/13/2018


Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personalservice machines (Adopted IEC/CEI 60335-2-82:2002, edition 2:2002 consolidated with amendment 1:2008, with Canadian deviations)

2/13/2018


Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steamcleaners (Adopted IEC 60335-2-79:2002 + A1:2004 + A2:2007, edition2.2, 2007-09, with Canadian deviations)

2/13/2018

Energy B625-13 (R2018) Portable tanks for the transport of dangerous goods 2/12/2018

Electrical / Electronics CAN/CSA-C68.5-13 (R2018)

Shielded and concentric neutral power cable for distribution utilities

2/12/2018


O118.1-08 (R2018) Western Red Cedar Shakes and Shingles 2/12/2018




O118.2-08 (R2018) Eastern White Cedar Shingles 2/12/2018


O118.3-08 (R2018) Northern Pine Tapersawn Shakes 2/12/2018

Electrical / Electronics CAN/CSA-C22.2 NO. 60745-2-1-04 (R2018)

Hand-Held Motor-Operated Electric Tools - Safety - Part 2-1: Particular Requirements for Drills and Impact Drills(Bi-National standard, with UL 60745-2-1)

2/12/2018


Hand-Held Motor-Operated Electric Tools - Safety - Part 2-4: Particular Requirements for Sanders and Polishers Other Than Disk Type (Bi-National standard, with UL 60745-2-4)

2/12/2018


Hand-Held Motor-Operated Electric Tools - Safety - Part 2-6: Particular Requirements for Hammers (Bi-National standard, with UL 60745-2-6)

2/12/2018


Hand-Held Motor-Operated Electric Tools - Safety - Part 2-8: Particular Requirements for Shears and Nibblers (Bi-National standard, with UL 60745-2-8)

2/12/2018


Hand-Held Motor-Operated Electric Tools - Safety - Part 2-9: Particular Requirements for Tappers(Bi-National standard, with UL 60745-2-9)

2/12/2018


Hand-Held Motor-Operated Electric Tools - Safety - Part 2-11: Particular Requirements for Reciprocating Saws (Bi-National standard, with UL 60745-2-11)

2/12/2018


Hand-Held Motor-Operated Electric Tools - Safety - Part 2-14: Particular Requirements for Planers (Bi-National standard, with UL 60745-2-14)

2/12/2018

Electrical / Electronics C227.5-08 (R2018) Three-Phase Live-Front Pad-Mounted Distribution Transformers 2/12/2018


Hand-Held Motor-Operated Electric Tools - Safety - Part 2-2: Particular Requirements for Screwdrivers and Impact Wrenches

(Bi-National standard, with UL 60745-2-2)

2/12/2018

Electrical / Electronics C22.2 NO. 14-13 (R2018) Industrial control equipment 2/12/2018


Automatic electrical controls for household and similar use -Part 2-14: Particular requirements for electric actuators(Adopted IEC/CEI 60730-2-14:1995, edition 1:1995,

2/8/2018



consolidated with amendment 1:2001 and amendment 2:2007, with Canadian deviations)

Electrical / Electronics CAN/CSA-E60335-2-3:13(R2018)

Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons (Adopted IEC 60335-2-3:2002, edition 5:2002 consolidated with amendment 1:2004 and amendment 2:2008, with Canadian deviations)

2/8/2018


Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors(Adopted IEC 60335-2-4:2008, sixth edition, 2008-09, with Canadian deviations)

2/8/2018


Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers (Adopted IEC 60335-2-5:2002, edition 5:2002 consolidated with amendment 1:2005 and amendment 2:2008, with Canadian deviations)

2/8/2018


Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similarappliances (Adopted IEC 60335-2-12:2002, edition 5:2002 consolidated with amendment 1:2008, with Canadian deviations)

2/8/2018


Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans andsimilar appliances (Adopted IEC 60335-2-13:2009, sixth edition, 2009-12, with Canadian deviations)

2/8/2018

Electrical / Electronics CAN/CSA-C61400-2-08 (R2018)

Wind Turbines - Part 2: Design Requirements for Small Wind Turbines (Adopted CEI/IEC 61400-2:2006, second edition, 2006-03, with Canadian deviations)Aérogénérateurs - Partie 2: Exigences en matière deconception des petits aérogénérateurs (norme CEI/IEC 61400-2:2006 adoptée, deuxième édition, 2006-03, avec exigences propres au Canada)

1/31/2018

Electrical / Electronics C22.2 NO. 18.5-13(R2018)

Positioning devices (Bi-national standard, with UL 1565)

1/23/2018


Metallic outlet boxes (Tri-national standard, with UL 514A and ANCE NMX- J-023/1)

1/23/2018

Construction Products A123.22-08 (R2018) Self-Adhering Polymer Modified Bituminous Sheet Materials 1/17/2018



and Materials Used as Steep Roofing Underlayment for Ice Dam Protection

Life Sciences CAN/CSA-Z305.8-03 (R2018)

Medical Supply Units 1/16/2018

Life Sciences CAN/CSA-Z1003-13/BNQ 9700-803/2013 (R2018)

Psychological health and safety in the workplace - Prevention, promotion, and guidance to staged implementation

1/16/2018

Energy N288.3.4-13 (R2018) Performance testing of nuclear air-cleaning systems at nuclear facilities

1/12/2018

Life Sciences Z387-13 (R2018) Safe use of electrosurgical medical devices and systems in health care

1/12/2018

Life Sciences CAN/CSA-Z5356-2-08 (R2018)

Anaesthetic and Respiratory Equipment - Conical Connectors -Part 2: Screw-Threaded Weight-Bearing Connectors (Adopted ISO 5356-2:2006, second edition, 2006-09-01, with Canadian deviations)

1/12/2018


Lung Ventilators - Part 4: Particular Requirements for Operator-Powered Resuscitators (Adopted ISO 10651-4:2002, first edition, 2002-03-01, with Canadian deviations)

1/12/2018


Lung Ventilators for Medical Use - Particular Requirements for Basic Safety and Essential Performance - Part 5: Gas-Powered Emergency Resuscitators(Adopted ISO 10651-5:2006, first edition, 2006-02-01, with Canadian deviations)

1/12/2018

Life Sciences CAN/CSA-Z18777-08 (R2018)

Transportable Liquid Oxygen Systems for Medical Use -Particular Requirements (Adopted ISO 18777:2005, first edition, 2005-02-15, with Canadian deviations)

1/12/2018

Life Sciences CAN/CSA-Z18778-08 (R2018)

Respiratory Equipment - Infant Monitors - ParticularRequirements (Adopted ISO 18778:2005, first edition, 2005-02-15, with Canadian deviations)

1/12/2018

Life Sciences CAN/CSA-B311-02 (R2018)

Safety Code for Manlifts 1/10/2018

Life Sciences Z364.2.1-13 (R2018) Monitoring systems for hemodialysis equipment 1/5/2018


Insulated multi-pole splicing wire connectors(Bi-national standard, with UL 2459)

1/3/2018



Electrical / Electronics CAN/CSA-C22.2 NO. 62471:12 (R2017)

Photobiological safety of lamps and lamp systems(Adopted IEC 62471:2006, first edition, 2006-07, with Canadiandeviations)

12/21/2017


Construction and Test of Industrial Heating Equipment 12/21/2017


Electrically Operated Toys 12/21/2017

Energy CSA 6.18-02 (R2017) Service Regulators for Natural Gas 12/21/2017

Electrical / Electronics C22.2 NO. 41-13 (R2017) Grounding and bonding equipment (Tri-national standard, with NMX-J-590-ANCE and UL 467)

12/21/2017


Cover plates for flush-mounted wiring devices (Bi-national standard, with UL 514D)

12/21/2017


General Requirements and Methods of Testing for NonmetallicConduit

12/21/2017

Electrical / Electronics CAN/CSA-C22.2 NO. 62471:12 (R2017)

Photobiological safety of lamps and lamp systems(Adopted IEC 62471:2006, first edition, 2006-07, with Canadiandeviations)

12/20/2017

Electrical / Electronics CAN/CSA-E1029-1-94 (R2017)

Safety of Transportable Motor-Operated Electric Tools - Part 1: General Requirements (Adopted IEC 1029-1:1990, first edition, with Canadiandeviations)

12/20/2017


Safety of Transportable Motor-Operated Electric Tools - Part 2: Particular Requirements for Circular Saws (Adopted IEC 1029-2-1:1993, first edition)

12/20/2017


Safety of Transportable Motor-Operated Electric Tools - Part 2: Particular Requirements for Radial Arm Saws (Adopted IEC 1029-2-2:1993, first edition)

12/20/2017


Safety of Transportable Motor-Operated Electric Tools - Part 2: Particular Requirements for Planers and Thicknessers(Adopted IEC 1029-2-3:1993, first edition)

12/20/2017


Safety of Transportable Motor-Operated Electric Tools - Part 2: Particular Requirements for Bench Grinders (Adopted IEC 1029-2-4:1993, first edition)

12/20/2017


Safety of Transportable Motor-Operated Electric Tools - Part 2: Particular Requirements for Band Saws

12/20/2017



(Adopted IEC 1029-2-5:1993, first edition)


Safety of Transportable Motor-Operated Electric Tools - Part 2: Particular Requirements for Diamond Drills With Water Supply(Adopted IEC 1029-2-6:1993, first edition)

12/20/2017


Safety of Transportable Motor-Operated Electric Tools - Part 2: Particular Requirements for Diamond Saws With Water Supply(Adopted IEC 1029-2-7:1993, first edition)

12/20/2017

Electrical / Electronics C22.2 NO. 221-M1986 (R2017)

Electrically Heated Hobby and Educational Type Kilns 12/20/2017


Spas, hot tubs and associated equipment 12/20/2017

Electrical / Electronics C22.2 NO. 23.1-M1986 (R2017)

Electric Furnaces in Combination With Solid Fuel-FiredFurnaces

12/20/2017


Fuseholder assemblies 12/18/2017

Electrical / Electronics C22.2 NO. 0.1-M1985 (R2017)

General Requirements for Double-Insulated Equipment 12/15/2017


CAN/CSA-ISO 19903-07 (R2017)

Petroleum and Natural Gas Industries - Fixed ConcreteOffshore Structures(Adopted ISO 19903:2006, first edition, 2006-12-01)

12/6/2017


Extra-Low-Voltage Landscape Lighting Systems 12/5/2017

Withdrawals

The standards listed in this section have been withdrawn. Most withdrawn standards are available from our archived collection. Program Standard Title Date Posted ScopeConstruction Products and Materials

CAN/CSA-B45 SERIES-02 (R2013)

Plumbing Fixtures (Consists of B45.0, B45.1, B45.2, B45.3, B45.4, B45.5, B45.6, B45.7, B45.8 and B45.9)

2/23/2018

Electrical / Electronics C108.1.2-M1981 (R2013) Electromagnetic Interference Measuring Instrument - ANSIType

2/12/2018

Natural Resources CAN/CSA-Z804-08 (R2013)

Sustainable Forest Management for Woodlots and Other Small Area Forests

1/23/2018



Shop CSA

Copyright © 2018 CSA Group. All Rights Reserved.


Safety Requirements for Electronic Flash Apparatus for Photographic Purposes (Adopted IEC 491:1984, second edition, with Canadian deviations)Règles de sécurité pour les appareils électroniques à éclairs pour la photographie (norme CEI 491:1984 adoptée, deuxièmeédition, avec modifications)

1/10/2018

Current List of Endorsed Standards

Current List of Endorsed Standards View Detail

Formal Interpretations

This section lists questions that individuals have submitted about a particular standard. Each question has been reviewed and answered by the appropriate committee. View Detail

Informs & Certification Notices

This section lists notices that are published by Certification and Testing. An Informs Notice contains information only. A Certification Notice announces changes that may affect product certification. Please allow time for page to load. View Detail



Date post:	20-Jul-2018
Category:	Documents
Upload:	duongkhuong
View:	213 times
Download:	0 times

View All - standardsactivities.csa.ca · Commentaire sur CSA S157-17, Calcul de la résistance...

Documents