PAGE 12 73 73 74 74 75 75 76 78 78 79 80 80 81 81 82 82 83 83 84 85 86 87 87 85 88 77 N Making the chin rest. 101 102 103 105 106 107 108 108 112 112 113 114 115 115 109 109 110 111 104 Attach the back sides together. Attach the back sides together. Attach the back sides together. Attach the back sides together. As shown here, attach it so that its center becomes curved. As shown here, attach the chin rest. Adjust it so that it fits the thickness of the body. Cut out. After attach the back sides together,cut out the orange parts. Make this part by using something thin like a toothpick (2.5mm in diameter) to roll it. ※ Add some adhesive on the ends. ※ This is how the chin rest will appear when completed. ※ Add some adhesive on the ends. ※ Make two of these. ※ Make two of these. ※ Roll the paper in the order of 1 to 2. Violin : Assembly Instructions
Transcript
PAGE 12
73
73
74
74
75
75
76
78
78
79 80
80
81
81
82
8283
83
84 85
86 87
87
85
88
77
N Making the chin rest.
101
102
103
105
106107
108
108
112
112
113114
115
115
109
109
110
111
104
Attach the back sides together.
Attach the back sides together.
Attach the back sides together.
Attach the back sides together.
As shown here, attach it so that its center becomes curved.
As shown here, attach the chin rest.
Adjust it sothat it fits the thickness of the body.
Cut out.
After attach the back sidestogether,cut out the orange parts.
Make this part by using somethingthin like a toothpick(2.5mm in diameter) to roll it.
※ Add some adhesive on the ends.
※ This is how the chin rest will appear when completed.
※ Add some adhesive on the ends.
※ Make two of these.
※ Make two of these.※ Roll the paper in the order of 1 to 2.
Violin : Assembly Instructions
PAGE 13
89
90
91
91
92
92
93
94
94
95
95
96
96
97
97
98
98
99
101
101
100
100
102
102
103
O Making the bow.
116
116
117
117
118
119
120
121
122
123
124
125
126
127
128 129
130
131
132
133
134
Make this piece by rolling it around a round stick(5mm in diameter).
Make this piece by rolling it around a round stick(5mm in diameter).
Roll it into a tubular shape and insert each end into the respective parts.
Set them somewhere around the center and attach.
As shown here, attach the sides together after attaching 121 to 120.
Attach the parts as shown here.
Add some adhesive on the ends.
Attach the parts as shown here.
Attach the back sides together.
※ This is how the bow will appear when completed.
Violin : Assembly Instructions
PAGE 14
105
105
106 107
108
104
104
P Making the violin's stand.
Attach the parts as shown here.
※This is how the stand will appear when completed.
![87 STAT. ] PUBLIC LAW 93-112-SEPT. 26, 1973 355 · 87 STAT. ] PUBLIC LAW 93-112-SEPT. 26, 197359 3 JOINT FUNDING SEC. 5. Pursuant to regulations prescribed by the President, and to](https://static.documents.pub/doc/80x56/5f3cc15827e8d23ef655c30e/87-stat-public-law-93-112-sept-26-1973-355-87-stat-public-law-93-112-sept.jpg)
