+ All Categories
Home > Documents > VIP-804 Programming. The summary page allows you to see a brief description of important information...

VIP-804 Programming. The summary page allows you to see a brief description of important information...

Date post: 03-Jan-2016
Category:
Upload: harvey-montgomery
View: 212 times
Download: 0 times
Share this document with a friend
Popular Tags:
31
VIP-804 Programming
Transcript
Page 1: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

VIP-804 Programming

Page 2: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

The summary page allows you to see a brief description of important information currently

programmed into the VIP unit.

Page 3: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

“Name”

Page 4: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

The MAC Number is a unique hardware ID for each unit. The Mac Number can also be

found on a label on the unit.

Page 5: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

“Device Type”

Page 6: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

How may channels the device has.

Page 7: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

And the firmware version that the unit left the factory with and what it is currently.

Page 8: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

The “Properties” tab allows you to enter a unique name for the device.

Page 9: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

The “Log Level” is used to determine the complexity of the Syslog information that the unit will send. Level “1” is used

for typical call accounting.

Page 10: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

Enter the time zone the unit is located in so that the unit can automatically adjust offset

from GMT.

Page 11: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

VIP units can use DHCP but a Static IP Address is preferred.

Page 12: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

Next enter the Subnet Mask for the LAN on which the devise resides.

Page 13: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

Enter the IP address of the Gateway connecting the LAN to other networks

Page 14: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

VIP devices can automatically send Syslog data to a Syslog server.

Page 15: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

Enter the Dial Code which will be used to access the unit or channel.

Page 16: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

Auto Destination is the Dial Code of another unit or channel to which the input of this

channel is mapped.

Page 17: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

Enter the CID Name and Number as they should appear on a Caller ID display.

Page 18: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

Currently the VIP units only support the G.711 Codec. This Codec supports 8Khz of

bandwidth.

Page 19: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

If you have an Auto Destination set up and the called party does not answer or is busy you can forward the call to another party.

Page 20: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

Enter the number of rings before you forward the call.

Page 21: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

You can set gain or attenuation for the audio input of each channel.

Page 22: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

You can also set gain or attenuation for the audio output of each channel.

Page 23: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

VOX activation can be used to on an audio input to initiate a call.

Page 24: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

A dry contact closure can be used to initiate a call on any channel.

Page 25: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

Input Function is used to activate the contact closure input.

Page 26: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

Activate On determines if the input activates on normally open or normally

closed.

Page 27: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

You can associate a relay to follow any audio input, audio output or DTMF during a

call.

Page 28: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

Use “Relay Function” to determine how you would like the relay to act.

Page 29: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

Any audio output can be part of any or all audio groups.

Page 30: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

Select Communications/Update Changed Devices to set the information to the VIP

unit.

Page 31: VIP-804 Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit.

•The VIP unit is now programmed and ready for service.


Recommended