Unit study package code: VISA1012 Mode of study: Area External Credit Value: 25.0 Pre-requisite units: Nil Co-requisite units: Nil Anti-requisite units: Nil Result type: Grade/Mark Approved incidental fees: Information about approved incidental fees can be obtained from our website. Visit fees.curtin.edu.au/incidental_fees.cfm for details. Unit coordinator: Title: Ms Name: Trish Little Phone: N/A Email: [email protected]Location: Building: Remote - Room: Remote Consultation times: If the matter is urgent the Course Coordinator can be contacted : +61 8 92664042 Teaching Staff: Administrative contact: Name: Areta Sumana Phone: +618 9266 3528 Email: [email protected]Location: Building: 603 Learning Management System: Blackboard (lms.curtin.edu.au) Unit Outline VISA1012 VSW13 Fine Art Studio Materials OpenUnis SP 1, 2016 DVC Education OUA Programs VISA1012 VSW13 Fine Art Studio Materials OUA 17 Feb 2016 OUA Programs, DVC Education Page: 1 of 13 CRICOS Provider Code 00301J The only authoritative version of this Unit Outline is to be found online in OASIS
Transcript
Unit study package code: VISA1012
Mode of study: Area External
Credit Value: 25.0
Pre-requisite units: Nil
Co-requisite units: Nil
Anti-requisite units: Nil
Result type: Grade/Mark
Approved incidental fees: Information about approved incidental fees can be obtained from our website. Visit fees.curtin.edu.au/incidental_fees.cfm for details.
Unit coordinator: Title: MsName: Trish LittlePhone: N/AEmail: [email protected]: Building: Remote - Room: RemoteConsultation times: If the matter is urgent the Course Coordinator can be
Acknowledgement of Country We respectfully acknowledge the Indigenous Elders, custodians, their descendants and kin of this land past and present.
Syllabus This unit will introduce you to visual art specialisations through a number of thematically-based projects. In this unit you will be encouraged to explore ideas through material exploration and inquiry. You will be exposed to a variety of disciplines to develop your understanding of contemporary art practice.
Introduction Welcome to VSW13 Fine Art Studio Materials. This unit has been specifically written and designed to parallel our on-campus programs in the Department of Art at Curtin University. This unit creates and offers different learning experiences to enable you to work without the support of a full studio workshop. The program is not focused on the use of equipment, but on utilizing what is at hand in your local environment.
This unit will introduce you to some of the fundamental concepts and processes of contemporary Sculpture. You are encouraged to adopt an interdisciplinary methodology. There are many possibilities within sculpture that can be explored by interrelating media and adopting a multi discursive approach. Think laterally, make connections, undertake serious play and be open to the unplanned and the unexpected. Above all enjoy your learning experiences.
There are set projects based on the theme Time and Space to assist in the development of your understanding of contemporary practices in Sculpture. The emphasis is on the exploration of ideas and creative visual inquiry. You will develop research methodologies and documentation skills through your study in this unit.
We hope you enjoy this unit.
Unit Learning Outcomes All graduates of Curtin University achieve a set of nine graduate attributes during their course of study. These tell an employer that, through your studies, you have acquired discipline knowledge and a range of other skills and attributes which employers say would be useful in a professional setting. Each unit in your course addresses the graduate attributes through a clearly identified set of learning outcomes. They form a vital part in the process referred to as assurance of learning. The learning outcomes tell you what you are expected to know, understand or be able to do in order to be successful in this unit. Each assessment for this unit is carefully designed to test your achievement of one or more of the unit learning outcomes. On successfully completing all of the assessments you will have achieved all of these learning outcomes.
Your course has been designed so that on graduating we can say you will have achieved all of Curtin's Graduate Attributes through the assurance of learning process in each unit.
On successful completion of this unit students can: Graduate Attributes addressed
1 Demonstrate technical, conceptual and experimental strategies
2 Develop ideas from set projects and independent research
3 Demonstrate the use of various materials relevant to concept and form
4 Demonstrate an appropriate level of discernment, critical thought and commitment in relation to the production of artwork
DVC Education OUA Programs
VISA1012 VSW13 Fine Art Studio MaterialsOUA 17 Feb 2016 OUA Programs, DVC Education
Page: 2 of 13CRICOS Provider Code 00301J
The only authoritative version of this Unit Outline is to be found online in OASIS
Curtin's Graduate Attributes
Learning Activities There are five projects in VSW13 outlined in the Study Guide that will cover a range of sculptural practices and mediums. To develop conceptual understanding, all projects will be explored and researched under the umbrella of a common theme Time and Space.
Throughout the five projects, you will be required to undertake visual and artist research to provide and build your knowledge and expertise in the field of art practice. It is expected that you apply between three and five hours to complete each exercise. The rest of the time allocated for that week can be dedicated to your ongoing research to inform your work. To get the best experience in this unit your regular participation and contribution to the discussion room will enhance and develop your learning at a relatively good pace.
The exercises are intended to develop a particular idea or technical ability in relation to each project and within the broader subject presented. The exercises in the Study Guide are sequential and it is strongly advised that the presented order is followed as an understanding of each week’s exercises leads often to the next more challenging project.
The unit is designed for varied interpretations and approaches. This should promote diversity of expression; encourage individual thinking and creative problem solving. Think of the projects set merely as parameters guiding rather than directing. It provides a foundation of technical skills and a platform for which conceptual investigation for ideas can be further developed.
It is also important to be aware of the submission dates for this unit and allow adequate time to complete various exercises including the research of artists and artworks that support your practice.
Students are required to:
l Complete the weekly tasks and research as outlined in the Study Guide. The Study Guide is available in Blackboard under the Unit Materials link.
l Complete the Readings provided for the unit in eReserve as listed throughout the Study Guide. l Complete the Online Discussion tasks as outlined in the Study Guide and contribute to weekly discussions on
the Discussion Board (located in Blackboard) for this unit. l Utilise all of the learning resources available through Blackboard as well as those that you identify through
your own further research to complete your assignments. l Complete all assessment items. l Comply with all university regulations including those pertaining to academic integrity
academicintegrity.curtin.edu.au l Participate in live Collaborate sessions as scheduled by your tutor
The unit materials for VSW13 are accessible in Blackboard via the link Unit Materials. The materials include the Study Guide, links to the set of Readings and additional learning tools and eResources.
Study Guide The Study Guide is specifically written for a fully online mode of learning. It provides the major content of your unit, with comprehensive instructions for the set projects and exercises that are required for you to successfully complete the unit. It is your primary guide to your learning and your engagement in a contemporary professional art course.
Set of Readings Blackboard includes a link to Curtin University library E-Reserve Collection where you can access your set of selected readings for the unit. The Set of Readings provide a selection of articles from a variety of sources to assist you in broadening your knowledge and understanding in contemporary art practice. It is expected that you extend your knowledge by reading further and beyond what has been provided. You are required to read at least one article per week. Other Learning Resources
The Learning Resources Folder is located inside the Unit Materials page. Here you will find a variety of useful resources specific to this unit, along with exemplars of previous students’ presentation submissions.
To assist your on-line learning experience, additional technical information and ‘how to’s’ have been developed which can be found in the SoDA Start-up Pack http://sodastartup.org/
As a Curtin University OUA student within the School of Design & Art, you have full access to the premium Lynda.com library for the duration of your enrolment. Lynda.com is a leading online learning company that provides training tutorials to help you learn software, technology and creative skills to achieve personal and professional goals.
To start using your Lynda.com account, new students should look for the “Invitation Email” in your Curtin student email account from the Humanities Office of Teaching and Learning. If you wish to activate your account follow the registration instructions. Existing Lynda.com users can continue to access under a current Curtin University OUA Art and Design enrolment.
Art Supplies You are expected to supply your own art materials for this unit. While a fully equipped working studio is not required students should have a designated working space in which to think and make work.
TEXTS, REFERENCES AND FURTHER READING Please consult the reference lists and websites associated with each project in the Study Guide and seek the Learning Resource for further references. There are also a large number of eBooks available for you to access through the Curtin University library E-Reserve > Databases A-Z > Ebook Library - links accessible here: http://catalogue.curtin.edu.au/primo_library/libweb/action/search.do?mode=Basic&vid=CUR&tab=courseresevres&
DVC Education OUA Programs
VISA1012 VSW13 Fine Art Studio MaterialsOUA 17 Feb 2016 OUA Programs, DVC Education
Page: 4 of 13CRICOS Provider Code 00301J
The only authoritative version of this Unit Outline is to be found online in OASIS
Visual Diary: Documentation of entries; Web-based and artist research; Conceptual development of the theme
Task Value % Date DueUnit Learning Outcome(s)
Assessed
1Studio Report 10 percent Week: 3
Day: Monday Time: 17:00
2
2Project Presentation 40 percent Week: 7
Day: Monday Time: 17:00
1,2,3,4
3Final Folio Assessment 50 percent Week: 13
Day: Monday Time: 17:00
1,2,3,4
Assessment Criteria
0-49 Inadequate evidence
50-59 Evident at a basic
level
60-69 Proficient
70-79 Developed
80-100 Highly
Developed
Thematic & conceptual development
Evidence of Material use & experimentation.
Artists References (3 Relevant)
Clarity and presentation of research
DVC Education OUA Programs
VISA1012 VSW13 Fine Art Studio MaterialsOUA 17 Feb 2016 OUA Programs, DVC Education
Page: 5 of 13CRICOS Provider Code 00301J
The only authoritative version of this Unit Outline is to be found online in OASIS
3. Final Folio Assessment Worth: 50% Due: Monday week 13
Submission Requirements
Project 4: Exercise 1 and 2
Project 5: Exercise 1 and 2
Visual Diary: Web-based and artist research; Conceptual development on the theme
Evidence of Discussion Board contributions to Online Discussion Activity items 1-6
Brief Self Evaluation – report on your learning outcomes for the unit.
Assessment Criteria
0-49 Inadequate evidence
50-59 Evident
at basic level
60-69 Proficient
70-79 Developed
80-100 Highly
Developed
Demonstrate fundamental technical and experimental strategies
Demonstrate aptitude in the use of various materials relevant to concept and form.
Demonstrate an appropriate level of Commitment and discernment
Demonstrate an appropriate level in ideas development and critical thinking
Assessment Criteria
0-49 Inadequate Evidence
50-59 Evident at basic level
60-69 Proficient
70-79 Developed
80-100 Highly
Developed
Demonstrate fundamental technical
and experimental strategies
Demonstrate aptitude in the use of various materials relevant to concept and form.
Demonstrate an appropriate level of Commitment and discernment
Demonstrate an appropriate level in ideas development and critical thinking
Demonstrate an appropriate level of contribution and evidence of original and analytical thought in response to Online Discussion Activities
DVC Education OUA Programs
VISA1012 VSW13 Fine Art Studio MaterialsOUA 17 Feb 2016 OUA Programs, DVC Education
Page: 6 of 13CRICOS Provider Code 00301J
The only authoritative version of this Unit Outline is to be found online in OASIS
Pass requirements
There are three submissions required to complete the assessments in this unit. You must attempt all assessments and achieve a final grade of 50% or more to pass the unit. Fair assessment through moderation
Moderation describes a quality assurance process to ensure that assessments are appropriate to the learning outcomes, and that student work is evaluated consistently by assessors. Minimum standards for the moderation of assessment are described in the Assessment and Student Progression Manual, available from policies.curtin.edu.au/policies/teachingandlearning.cfm
Late assessment policy
This ensures that the requirements for submission of assignments and other work to be assessed are fair, transparent, equitable, and that penalties are consistently applied.
1. All assessments students are required to submit will have a due date and time specified on this Unit Outline. 2. Students will be penalised by a deduction of ten percent per calendar day for a late assessment submission
(eg a mark equivalent to 10% of the total allocated for the assessment will be deducted from the marked value for every day that the assessment is late). This means that an assessment worth 20 marks will have two marks deducted per calendar day late. Hence if it was handed in three calendar days late and given a mark of 16/20, the student would receive 10/20. An assessment more than seven calendar days overdue will not be marked and will receive a mark of 0.
Assessment extension
A student unable to complete an assessment task by/on the original published date/time (eg examinations, tests) or due date/time (eg assignments) must apply for an assessment extension using the Assessment Extension form (available from the Forms page at students.curtin.edu.au/administration/) as prescribed by the Academic Registrar. It is the responsibility of the student to demonstrate and provide evidence for exceptional circumstances beyond the student's control that prevent them from completing/submitting the assessment task.
The student will be expected to lodge the form and supporting documentation with the unit coordinator before the assessment date/time or due date/time. An application may be accepted up to five working days after the date or due date of the assessment task where the student is able to provide an acceptable explanation as to why he or she was not able to submit the application prior to the assessment date. An application for an assessment extension will not be accepted after the date of the Board of Examiners' meeting.
Deferred assessments
If your results show that you have been granted a deferred assessment you should immediately check your OASIS email for details.
Deferred examinations/tests will be held from 18/07/2016 to 01/08/2016 . Notification to students will be made after the Board of Examiners’ meeting via the Official Communications Channel (OCC) in OASIS.
Supplementary assessments
Supplementary assessments are not available in this unit.
Referencing style
The referencing style for this unit is Chicago.
More information can be found on this style from the Library web site:
DVC Education OUA Programs
VISA1012 VSW13 Fine Art Studio MaterialsOUA 17 Feb 2016 OUA Programs, DVC Education
Page: 7 of 13CRICOS Provider Code 00301J
The only authoritative version of this Unit Outline is to be found online in OASIS
Academic Integrity (including plagiarism and cheating) Any conduct by a student that is dishonest or unfair in connection with any academic work is considered to be academic misconduct. Plagiarism and cheating are serious offences that will be investigated and may result in penalties such as reduced or zero grades, annulled units or even termination from the course.
Plagiarism occurs when work or property of another person is presented as one's own, without appropriate acknowledgement or referencing. Submitting work which has been produced by someone else (e.g. allowing or contracting another person to do the work for which you claim authorship) is also plagiarism. Submitted work is subjected to a plagiarism detection process, which may include the use of text matching systems or interviews with students to determine authorship.
Cheating includes (but is not limited to) asking or paying someone to complete an assessment task for you or any use of unauthorised materials or assistance during an examination or test.
From Semester 1, 2016, all incoming coursework students are required to complete Curtin’s Academic Integrity Program (AIP). If a student does not pass the program by the end of their first study period of enrolment at Curtin, their marks will be withheld until they pass. More information about the AIP can be found at: https://academicintegrity.curtin.edu.au/students/AIP.cfm
Refer to the Academic Integrity tab in Blackboard or academicintegrity.curtin.edu.au for more information, including student guidelines for avoiding plagiarism.
Information and Communications Technology (ICT) Expectations Curtin students are expected to have reliable internet access in order to connect to OASIS email and learning systems such as Blackboard and Library Services.
You may also require a computer or mobile device for preparing and submitting your work.
For general ICT assistance, in the first instance please contact OASIS Student Support: oasisapps.curtin.edu.au/help/general/support.cfm
For specific assistance with any of the items listed below, please contact The Learning Centre: life.curtin.edu.au/learning-support/learning_centre.htm
l Using Blackboard, the I Drive and Back-Up files l Introduction to PowerPoint, Word and Excel
DVC Education OUA Programs
VISA1012 VSW13 Fine Art Studio MaterialsOUA 17 Feb 2016 OUA Programs, DVC Education
Page: 8 of 13CRICOS Provider Code 00301J
The only authoritative version of this Unit Outline is to be found online in OASIS
Additional information Plagiarism is taken very seriously at Curtin University. When submitting an assignment in this unit you are declaring that you have created all work, and that it has not been previously submitted for assessment for another unit or at another institution. When including images or text not created by you /or not entirely created by you (as research or to provide context) you must;
l Reference these images or texts using Chicago referencing. l Include in-text references. l Include a reference list at the end of the file/document.
Referencing is relevant to all forms of assessment including essays, process files/journals, art or design portfolios and/or reports.
It is a requirement of your enrolment that you refer to the Curtin University Academic Integrity website prior to submitting your work. http://academicintegrity.curtin.edu.au/students/
Failure to follow these guidelines and being found to be in breach of Curtin University’s Management of Plagiarism Policy will result in a penalty being applied to your assignment and/or your academic status.
HEALTH & SAFETY
The work you will undertake in this unit of study may involve using materials and/or processes that could be hazardous to your health. It is your responsibility as a student to ensure you are aware of the materials you use and minimise any hazards they may pose. Please refer to the unit Study Guide for further information regarding Health & Safety procedures.
PRESENTATION AND SUBMITTING FOLIO FOR ASSESSMENT
The format of your presentation should be well considered for the assessment of your work. It is expected that you learn to develop good documentation skills with digital photography to best present your work for online assessment. A submission which shows your working methodology and clearly presents your ideas and outcomes will help to present your work at its best. Use the Learning Resources to peruse the Guidelines and Examples of Presentations for VSW13.
It is a requirement that you sign and attach the Assignment Coversheet > Declaration and submit with your work for each assessment (digital or hardcopy).
All project work and items for each assessment are submitted online via the unit ASSESSMENT DROP BOX wherever possible. Please refer to information detailed below:
ONLINE BLACKBOARD > ASSESSMENT DROP BOX
When submitting your work for assessment, make sure you include all of the information in one single file. The preferred file formats for your submission are either: PowerPoint presentation (or similar), Word doc (or similar) or Adobe pdf file. Note: work submitted as multiple files will be returned to you to be re-submitted within a specified time-frame as a single file. If re-submission does not meet the required date as requested assessment penalties may be applied.
Presentation and Documentation: To ensure you present your best images for assessment we suggest you experiment with different settings, especially as your intention should be to convey the best possible record of your work. The assessment of your work is compromised if the quality of images is poor: e.g. out of focus, badly lit, low resolution (150dpi recommended), or have been digitally manipulated. It is appropriate to crop images to reduce any background interference. Use a neutral background like a white wall or black/white paper to place your work on before photographing.
DVC Education OUA Programs
VISA1012 VSW13 Fine Art Studio MaterialsOUA 17 Feb 2016 OUA Programs, DVC Education
Page: 9 of 13CRICOS Provider Code 00301J
The only authoritative version of this Unit Outline is to be found online in OASIS
Visual Diary: You can scan your visual diary or use a digital camera to document the appropriate pages.
Submitting Assignments in exceptional circumstances:
If for some reason you are unable to submit via the Assessment Drop Box please submit via the following method:
Email
Send your work as an attachment directly to your tutor's Curtin email address using your Curtin provided student email account. Make sure you clearly identify the unit and assessment item in the subject area of your email.
Enrolment
It is your responsibility to ensure that your enrolment is correct - you can check your enrolment through the eStudent option on OASIS, where you can also print an Enrolment Advice.
Student Rights and Responsibilities It is the responsibility of every student to be aware of all relevant legislation, policies and procedures relating to their rights and responsibilities as a student. These include:
l the Student Charter l the University's Guiding Ethical Principles l the University's policy and statements on plagiarism and academic integrity l copyright principles and responsibilities l the University's policies on appropriate use of software and computer facilities
Information on all these things is available through the University's "Student Rights and Responsibilities" website at: students.curtin.edu.au/rights.
Student Equity There are a number of factors that might disadvantage some students from participating in their studies or assessments to the best of their ability, under standard conditions. These factors may include a disability or medical condition (e.g. mental illness, chronic illness, physical or sensory disability, learning disability), significant family responsibilities, pregnancy, religious practices, living in a remote location or another reason. If you believe you may be unfairly disadvantaged on these or other grounds please contact Student Equity at [email protected] or go to http://eesj.curtin.edu.au/student_equity/index.cfm for more information
You can also contact Counselling and Disability services: http://www.disability.curtin.edu.au or the Multi-faith services: http://life.curtin.edu.au/health-and-wellbeing/about_multifaith_services.htm for further information.
It is important to note that the staff of the university may not be able to meet your needs if they are not informed of your individual circumstances so please get in touch with the appropriate service if you require assistance. For general wellbeing concerns or advice please contact Curtin's Student Wellbeing Advisory Service at: http://life.curtin.edu.au/health-and-wellbeing/student_wellbeing_service.htm
DVC Education OUA Programs
VISA1012 VSW13 Fine Art Studio MaterialsOUA 17 Feb 2016 OUA Programs, DVC Education
Page: 10 of 13CRICOS Provider Code 00301J
The only authoritative version of this Unit Outline is to be found online in OASIS
Recent unit changes Students are encouraged to provide unit feedback through eVALUate, Curtin's online student feedback system. For more information about eVALUate, please refer to evaluate.curtin.edu.au/info/.
Recent changes to this unit include:
The following changes have been made to this unit:
l new links and references have been included to assist student research and investigation strategies l additional learning resources have been developed to enhance the student learning experience
To view previous student feedback about this unit, search for the Unit Summary Report at https://evaluate.curtin.edu.au/student/unit_search.cfm. See https://evaluate.curtin.edu.au/info/dates.cfm to find out when you can eVALUate this unit.
DVC Education OUA Programs
VISA1012 VSW13 Fine Art Studio MaterialsOUA 17 Feb 2016 OUA Programs, DVC Education
Page: 11 of 13CRICOS Provider Code 00301J
The only authoritative version of this Unit Outline is to be found online in OASIS
Time allocation for this unit is 10 hours per week. This is the minimum requirement. We recommend that a maximum of 1-2 hours per week of this time is allocated to the discussion board.
Week Begin Date
VSW13 Sculpture
Fine Art Studio Materials
Blackboard
Online Discussion Activity
Submissions Due
for Assessment
0 week
22 Feb Peruse the unit materials in blackboard before week 1 commences.
1 29 Feb Project 1: The Kit
Exercise 1
#1 – Post a personal profile, introducing yourself to your fellow students in the VSW13 discussion room
2 7 March
Project 1: The Kit
Exercise 2
#2- Discuss and share your ideas about the theme
3 14 March
Project 1: The Kit
Exercise 3
Studio Report
Due: Week 3 Monday
Project 1: Ex 1 and 2
Visual diary: documentation of entries relating to web-based and artist research
4 21 March
Project 2: Colour and Context, Exercise 1
#3 - Post and discuss your work from Project 1
5 28 March
Project 2: Colour and Context, Exercise 2
6 4 April Project 3: The Ready Made, Exercises 1 and 2
#4 – share your learning experiences and images of your work from Project 2
7 11 April
Project 4: Materiality
Exercise 1
Project Presentation
Due: Week 7 Monday
Project 1: Ex 3
Project 2: Ex 1 and 2
Project 3: Ex 1 and 2
Visual Diary, Web-Based and Artist Research
DVC Education OUA Programs
VISA1012 VSW13 Fine Art Studio MaterialsOUA 17 Feb 2016 OUA Programs, DVC Education
Page: 12 of 13CRICOS Provider Code 00301J
The only authoritative version of this Unit Outline is to be found online in OASIS
8 18 April Project 4: Materiality
Exercise 1 (cont)
9 25 April Project 4: Materiality
Exercise 2
#5 - Post images and discuss your learning experience from Project 4
10 2 May Project 5: The Ephemeral
Exercise 1
11 9 May Project 5: The Ephemeral
Exercise 1 (cont)
12 16 May Project 5: The Ephemeral
Exercise 2
#6 – Discuss your approach, learning experience, research and post images of your resolved work from Project 5
13 23 May ASSESSMENT WEEK Complete eVALUate, your Unit Evaluation survey
Final Folio Assessment
Due Week 13. Monday
Project 4: Ex1 and 2
Project 5: Ex1 and 2
Visual Diary, including a self-evaluation report.
Evidence of online discussion activities # 1-6.
DVC Education OUA Programs
VISA1012 VSW13 Fine Art Studio MaterialsOUA 17 Feb 2016 OUA Programs, DVC Education
Page: 13 of 13CRICOS Provider Code 00301J
The only authoritative version of this Unit Outline is to be found online in OASIS
