Visi UNIMAS UNIMAS Untuk menjadi sebuah universiti contoh serta diiktiraf di peringkat antarabangsa...

Visi UNIMASUntuk menjadi sebuah universiti contoh serta diiktiraf di peringkat antarabangsa dan sebagai institusi pengajian tinggi yang menjadi pilihan utama golongan pelajar dan akademik melalui pencapaian cemerlang dalam pengajaran, penyelidikan dan kesarjanaan.

UNIMAS VisionTo become an exemplary university of internationally acknowledged stature and a scholarly institution of choice for both students and academics through the pursuit of excellence in teaching, research and scholarship

Misi UNIMASUntuk menjana, menyebar dan menerap ilmu secara strategik dan inovatif bagi memperkasakan kualiti budaya bangsa dan kemakmuran masyarakatnya.

UNIMAS MissionTo generate, disseminate and apply knowledge strategically and innovatively to enhance the quality of the nation’s culture and prosperity of its people.

Name:

Student ID:

Programme:

Address in Campus:

Permanent Address:

HP No:

E-mail:

In case of emergency, please contact:

Name:

Contact No:

Relationship with student:

Name:

Contact No:

E-mail:

Office Room:

Student ’S ProfIle

Academic Advisor Information:

Fakulti KejuruteraanBuku Panduan Pelajar Sesi 2018/20194

Kata Aluan / Foreword

Pegawai-pegawai Utama UNIMAS / The University Senior Management

Jawatankuasa Pengurusan Fakulti / Faculty Management Committee

Jawatankuasa Akademik Fakulti / Faculty Academic Committee

Pegawai Pengurusan dan Profesional / Administrative and Professional Officer

Visi / Vision

Misi / Mission

Objektif / Objective

Sejarah / History

Struktur Akademik / Academic Structure

Sistem Mentor-Mentee / Mentor-Mentee System

Latihan Industri / Industrial Training

Projek Tahun Akhir / Final Year Project

Persatuan Pelajar Fakulti Kejuruteraan (SAFE) /Student Association at Faculty of Engineering (SAFE)

6

7

8

10

12

13

14

17

19

20

21

KANDUNGAN / Contents

MUKASURATPages

Fakulti KejuruteraanBuku Panduan Pelajar Sesi 2018/2019 5

KANDUNGAN / Contents

MUKASURATPages

Program Kejuruteraan Sivil / Civil Engineering Programme

Program Kejuruteraan Mekanikal dan Pembuatan /Mechanical and Manufacturing Engineering Programme

Program Kejuruteraan Elektrikal dan Elektronik /Electrical and Electronic Engineering Programme Program Kejuruteraan Kimia /Chemical Engineering Programme

Program Senibina /Architeture Programme

Program Ukur Bahan /Quantity Surveying Programme

Kursus-Kursus Pengukuhan (R) / Remedial Courses (R)

Kursus-Kursus Pembangunan Generik (G) / Generic Courses (G)

Kursus-Kursus Elektif Universiti / University Elective Courses

Senarai Kursus Remedial Dan Generik Bagi Pelajar-Pelajar Antarabangsa / Remedial Courses And Generic Courses For International Students

Senarai Staf Sokongan Pentadbiran dan Sokongan Teknikal /Admistration & Technical Supporting Staffs

Kalendar Akademik Sarjana Muda /Academic Calendar For Undergraduate Studies

PROGRAM PENGAJIAN YANG DITAWARKAN / Programmes offered

24

32

41

49

56

62

68

68

70

77

78

84


Kata Aluan / foreword

Prof Madya Ir Dr Hjh Siti Noor Linda Hj TaibDekan / dean

Fakulti Kejuruteraan / Faculty of EngineeringUniversiti Malaysia Sarawak

Assalamualaikum Warahmatullahi Wabarakatuh dan Salam Sejahtera

Sekalung TAHNIAH diucapkan kepada mahasiswa dan mahasiswi yang telah terpilih untuk mengikuti program yang ditawarkan oleh Fakulti Kejuruteraan pada sesi 2018/2019 dan kedatangan anda ke Fakulti Kejuruteraan adalah amat dialu-alukan.

Fakulti Kejuruteraan menawarkan sembilan (9) program setakat ini iaitu Program Kejuruteraan Sivil, Program Kejuruteraan Mekanikal dan Pembuatan, Program Kejuruteraan Elektronik (Telekomunikasi), Program Kejuruteraan Elektronik (Komputer), Program Kejuruteraan Elektrikal dan Elektronik, Program Kejuruteraan Kimia, Program Senibina dan Program Ukur Bahan. Semua program kejuruteraan yang ditawarkan mendapat pengiktirafan daripada Lembaga Jurutera Malaysia. Program-program tersebut telah melahirkan ramai graduan yang telah berjaya dalam bidang masing-masing semenjak penubuhan Fakulti Kejuruteraan pada tahun 1993.

Fakulti Kejuruteraan turut menawarkan program Sarjana secara Kerja Kursus iaitu Program Sarjana Kejuruteraan Sivil sementara program-program lain peringkat siswazah yang ditawarkan oleh Fakulti Kejuruteraan adalah program Sarjana dan PhD secara penyelidikan. Tujuan program- program tersebut ditawarkan adalah untuk melahirkan graduan-graduan yang berkebolehan menghadapi cabaran dalam memacu pembangunan pada masa hadapan serta berkebolehan menggunakan teknologi terkini dalam usaha membangunkan negara.

Banyak aktiviti (akademik atau bukan akademik) telah dijalankan dalam usaha mempertingkatkan kualiti pengajaran dan pembelajaran. Fakulti Kejuruteraan amat aktif dalam menggunakan salah satu daripada kaedah pembelajaran iaitu kaedah OBE (Outcome Based Education) bagi memastikan keberkesanan setiap program yang ditawarkan. Kaedah pembelajaran yang ditawarkan juga memberi pendedahan khas kepada pelajar-pelajar untuk berkongsi pengalaman serta memberi kesedaran mengenai persediaan-persediaan yang mereka harus ada sebelum memasuki alam pekerjaan yang lebih mencabar.

Pihak fakulti akan sentiasa memberi kerjasama serta dorongan di sepanjang pengajian anda di UNIMAS.

Selamat Maju Jaya Demi Masa Depan yang Cemerlang!

Prof Madya Ir Dr Hjh Siti Noor Linda Hj Taib


PEGAWAI-PEGAWAI UTAMA UNIVERSITIthe university senior management

Naib Canselorvice-Chancellor

Prof Datuk Dr Mohamad Kadim Bin Suaidi

Timbalan Naib Canselor(Akademik &

Antarabangsa)deputy vice-Chancellor

(academic & international)

Prof Dr Fasihuddin Badruddin Ahmad

Timbalan Naib Canselor(Penyelidikan & Inovasi)deputy vice-Chancellor (research & innovation)

Prof Dr Wan HashimWan Ibrahim

Timbalan Naib Canselor(Hal Ehwal Pelajar & Alumni)

deputy vice-Chancellor (student affairs & alumni)

Prof Mohd Fadzil Abd Rahman

Pendaftarregistrar

Encik Henry TeningAk Sengeng

PengarahPusat Khidmat Maklumat

Akademikdirector

Centre of academic information servicesPuan Korina Ibrahim

Bendahari Bursar

Tuan Haji Mazlan Kiflie


JAWATANKUASA PENGURUSAN FAKULTIfaCulty management Committee

Dekan / deanProf Madya Ir Dr Hjh Siti Noor Linda Hj Taib

Timbalan Dekan(Prasiswazah) deputy dean (undergraduate)Prof Madya Dr Abdullah Hj Yassin

Timbalan Dekan(Penyelidikan & Siswazah)deputy dean(research and graduate)Dr Norhuzaimin Julai

Timbalan Dekan (Hal Ehwal Pelajar dan Alumi)deputy dean (student affairs and alumni)Dr Nazeri Abdul Rahman

Timbalan Dekan(Keterlibatan Industri, Komuniti dan Pengkomersilan) deputy dean(industry and Community engagement and Commercialization)Ir Dr Lim Soh Fong

Ketua Jabatan(Kejuruteraan Sivil)head of department(Civil engineering)Dr Mohamad Raduan Kabit

Ketua Jabatan (Kejuruteraan Mekanikal & Pembuatan) head of department(mechanical & manufacturing engineering)Dr Shahrol Mohamaddan


Penolong Pendaftar Kanansenior assistant registrarPuan Rozita Nawi

Penolong Pendaftarassistant registrarCik Rosmanti Kiflie

Penolong Pendaftar Kanansenior assistant registrarEncik Mizan Morshidi

Ketua Jabatan(Kejuruteraan Ukur Bahan)head of department(Quantity surveying) Prof Madya Sr Dr AfzanAhmad Zaini

Ketua Jabatan (Kejuruteraan Kimia & Sustainabiliti Tenaga)head of department(Chemical engineering and energy sustainability)Prof Madya Dr Rubiyah Baini

Ketua Jabatan (Kejuruteraan Elektrikal & Elektronik)head of department (electrical & electronics engineering)Dr Shafrida Sahrani

Ketua Jabatan(Kejuruteraan Senibina)head of department(architecture) DekanFakulti Alam Bina(1 September 2018)Prof Ar Nurakmal Abdullah Goh


JAWATANKUASA AKADEMIK FAKULTIfaCulty aCademiC Committee

Timbalan Dekan(Prasiswazah) deputy dean (undergraduate)Prof Madya Dr AbdullahHj Yassin

Ketua Jabatan (Kejuruteraan Mekanikal & Pembuatan )head of department(mechanical & manufacturing engineering)Dr Shahrol Mohamaddan

Ketua Jabatan (Kejuruteraan Sivil)head of department (Civil engineering)Dr Mohamad Raduan Kabit

Ketua Jabatan / head of department

Dekan / deanProf Madya Ir Dr Hjh Siti Noor Linda Hj Taib

Timbalan Dekan(Penyelidikan & Siswazah)deputy dean(research and graduate)Dr Norhuzaimin Julai

Timbalan Dekan (Hal Ehwal Pelajar dan Alumni)deputy dean(student affairs and alumni) Dr Nazeri Abdul Rahman

Ketua Jabatan (Kejuruteraan Kimia & Sustainabiliti Tenaga)head of department(Chemical engineering and energy sustainability)Prof Madya Dr Rubiyah Baini

Ketua Jabatan (Kejuruteraan Elektrikal & Elektronik)head of department (electrical & electronics engineering)Dr Shafrida Sahrani

Ketua Jabatan(Kejuruteraan Senibina)head of department(architecture) DekanFakulti Alam Bina(1 September 2018)Prof Ar Nurakmal Abdullah Goh

Ketua Jabatan(Kejuruteraan Ukur Bahan)head of department(Quanlity surveying) Prof Madya Sr Dr AfzanAhmad Zaini

Timbalan Dekan(Keterlibatan Industri, Komuniti dan Pengkomersilan) deputy dean(industry and Community engagement and Commercialization)Ir Dr Lim Soh Fong


Penyelaras Program / Programme Coordinators

Pascasiswazah / Postgraduate

Sarjana Muda Kejuruteraan Dengan Kepujian(Kejuruteraan Kimia)Bachelor of engineering with honours (Chemical engineering)Dr Josephine Lai Chang Hui

Sarjana Muda Kejuruteraan (Kepujian) Elektronik (Komputer) Bachelor of engineering (hons) in electronics (Computer)Dr Siti Kudnie Sahari

Sarjana Muda Kejuruteraan (Kepujian) Elektronik (Telekomunikasi) Bachelor of engineering (hons) in electronics (telecommunications)Dr Kho Lee Chin

Sarjana Muda Kejuruteraan Dengan Kepujian (Kejuruteraan Mekanikal dan Pembuatan)Bachelor of engineering with honours (mechanical and manufacturing engineering)Dr Nur Tahirah Razali

Sarjana Muda Kejuruteraan (Kepujian) Kejuruteraan Elektrikal dan ElektronikBachelor of engineering (hons) electrical and electronics engineering Encik Mohd RidhuanMohd Sharip

Prasiswazah / undergraduate

Sarjana Kejuruteraan (Sivil)master of engineering (Civil)Dr Raudhah Ahmadi

Sarjana Muda Sains (Kepujian) SenibinaBachelor of science (hons) architecture Dr Bambang Karsono

Sarjana Muda Sains (Kepujian) Ukur BahanBachelor of science (hons) Quantity surveyingEncik Abdul Wafi Razali

Sarjana Muda Kejuruteraan Dengan Kepujian(Kejuruteraan Sivil)Bachelor of engineering with honours (Civil engineering)Encik Jethro Henry Adam

Sarjana Kejuruteraan (Kimia)master of engineering (Chemical)Dr Norfamila Che Mat

Sarjana Kejuruteraan (Mekanikal)master of engineering (mechanical)Dr Marini Sawawi

Sarjana Kejuruteraan (Sistem Komunikasi)master of engineering (Communication systems)Ir Dr Kismet Anak Hong Ping


PEGAWAI PENGURUSAN DAN PROFESIONALadministrative and Professional offiCer

Penolong Pendaftar Kanansenior assistant registrar

Puan Rozita [email protected]

samb/ext : 3955

Pegawai Sains Science Officer

Encik Raja Mohd Raffel Bin [email protected]

samb/ext : 3456

Pegawai SainsScience Officer

Cik Norzilawatil Azwa [email protected]

samb/ext : 3458

Penolong Pendaftar assistant registrar

Cik Rosmanti Binti [email protected]

samb/ext : 3334

Penolong Pendaftar Kanansenior assistant registrar

Encik Mizan [email protected]

samb/ext : 3331


Visi / visionMenjadi Fakulti terkemuka dengan program akreditasi yang melahirkan graduan yang berkualiti, dan memanfaatkan masyarakat dan negara melalui penyelidikan berimpak tinggi dan teladan kepimpinan.

To be a leading faculty with accredited programmes producing quality graduates and benefiting the community and nation through high impact research and exemplary leadership.

Misi / missionMenyediakan budaya penambahbaikan berterusan melalui kurikulum yang holistik dan kajian strategik yang melibatkan penyertaan pihak berkepentingan yang diserahkan oleh ahli-ahli ilmiah Fakulti yang menyumbang ke arah penjanaan pengetahuan.

To provide a culture of continuous improvement and holistic curriculum involving stakeholders’ participation that is delivered by scholarly faculty members who contributes towards knowledge creation.

Objektif / objectiveMenjamin segala kegiatannya bersesuaian dengan perkembangan dan kemajuan teknologi baru dan akan datang, relevan dengan pembangunan negara dan seiring dengan usaha meningkatkan taraf keikhtisasan bidangnya. Semua ini terlaksana melalui penawaran pelbagai peluang dalam pendidikan kejuruteraan, latihan dan khidmat kesarjanaan serta melalui penerapan ilmu secara strategik dan inovatif bagi meningkatkan kualiti budaya bangsa dan kemakmuran masyarakatnya. To ensure all activities are appropriate to the development and advancement of new technologies and the future, relevant to the development of the country and in line with efforts to improve professionalism. All this is done by offering various opportunities in engineering education, training and services through the application of scholarship and knowledge in strategic and innovative ways to improve the quality of the nation’s culture and prosperity of its citizens.

Sejarah / historyFakulti Kejuruteraan merupakan salah sebuah fakulti daripada lapan buah fakulti yang wujud di UNIMAS. Ia ditubuhkan pada 30 Disember 1993. Seawal penubuhan, Fakulti Kejuruteraan telah menawarkan dua buah program pengajian iaitu Kejuruteraan Sivil dan Kejuruteraan Elektronik dan Telekomunikasi dengan pengambilan pertamanya pada sesi akademik Julai 1994. Pada tahun 1996, program Kejuruteraan Mekanikal dan Pembuatan telah ditawarkan dan disusuli dengan penawaran program Kejuruteraan Elektronik dan Komputer pada Mei 2000 bagi memenuhi keperluan serta pembangunan dalam bidang kejuruteraan. Program Kejuruteraan Kimia mula ditawarkan pada sesi akademik 2009 dan terkini Fakulti Kejuruteraan dengan bangganya telah menubuhkan satu lagi program baharu iaitu Program Kejuruteraan Elektrikal dan Elektronik bagi melahirkan lebih banyak graduan yang akan menjadi pemangkin dan penyumbang kepada sektor ekonomi.

Faculty of Engineering is one of the eight faculties in UNIMAS. It was established on 30 December 1993. On its establishment, Faculty of Engineering offered two undergraduate programmes, which are Civil Engineering and Electronics and Telecommunication and received its first admission in July 1994 academic session. In 1996, the Mechanical and Manufacturing Engineering programme was introduced, followed by offering of Electronics and Computer programme starting May 2000 to fulfill the demand and development in the engineering fields. Chemical Engineering programme was offered in 2009 academic session and now the Faculty of Engineering has proudly introduce the Electrical and Electronics Engineering programme to produce more qualified graduates who will be the catalyst and contributor to the advancement of Engineering profession and the economic sector.


STRUKTUR AKADEMIK / aCademiC struCture

Struktur Program / Programme structure

Setiap program pengajian di UNIMAS telah direkabentuk menurut kurikulum yang berasaskan kepada pembangunan individu secara total sebagai warga yang berautonomi tetapi saling bekerjasama dalam masyarakat. Struktur program pengajian mengandungi kursus-kursus menurut kategori berikut:

Each program at UNIMAS has been designed in accordance with the curriculum that is based on individual development as an autonomous citizen but working together in the community. The structure of the program consists of courses in the following categories:

Kursus Teras / Core Course

Kursus-kursus yang memberikan pengetahuan dan kemahiran ke arah pengkhususan dalam sesuatu bidang atau lapangan yang dituntut bagi sesuatu Program. (Setiap Program bukan sahaja tertumpu kepada teori dan amalan pengkhususannya, tetapi penekanan diberi kepada aspek teknologi dan pengurusan) [112+ kredit]

The courses provide knowledge and skills specializes in a particular field required for a program. (Each program not only focuses on the theory and practice of specialization, but the focus is on technology and management) [112+ credit]

Mata pelajaran Umum / general education subjectsMata Pelajaran Umum adalah kursus wajib universiti yang perlu diambil bagi tujuan pengijazahan. Kursus-kursus dibawah kategori MPU dilihat mampu untuk melahirkan graduan yang holistic, menghayati nilai-nilai patriotism dan jati diri beracuan Malaysia serta menguasai kemahiran insaniah ke arah memenuhi kebolehpasaran kerja. Kod kursus dibawah kategori ini bermula dengan MPU.

General Education Subjects are compulsory university courses which is the pre-requisite for the undergraduate award. Courses under the category of MPU are seen to be able to produce holistic graduates, appreciate the values of patriotism and Malaysian-born identity and mastering soft skills towards fulfilling job-oriented skills. The course code under this category starts with MPU.

Kursus Elektif Universiti / university elective Courses

Kursus yang diambil samada daripada program lain di dalam atau di luar fakulti

Courses offered by other program / faculty

Sistem Semester dan Kursus Bermodul / semester system and modular courses

Struktur pengajian di UNIMAS berasaskan kepada struktur semester dengan kursus bermodul. Tahun pengajian dibahagikan kepada dua semester:

Semester 1 14 mingguSemester 2 14 minggu


Study in UNIMAS is based on semester structure with modular courses. Each academic year is divided into two semesters:Semester 1 14 WeeksSemester 2 14 Weeks

Kursus yang ditawarkan adalah berbentuk modul, dan setiap modul mempunyai unit-unit pembelajaran tertentu. Setiap modul kursus mempunyai nilai kredit. Sebagai panduan, satu kredit memerlukan pelajar menumpukan kira-kira 3 jam pembelajaran seminggu bagi kursus berkenaan. Masa tersebut digunakan untuk aktiviti formal seperti kuliah, tutorial, amali dan/atau ujian, serta aktiviti kendalian sendiri seperti membaca, berbincang dan menyiapkan tugasan yang diperlukan oleh kursus tersebut.

Courses offered are is in module system, and each module has specific learning units. Each module has a credit value, one credit require students to devote about 3 hours of learning per week for the course. Time is used for informal activities such as lectures, tutorials, lab and / or test, as well as its own operating activities, such as reading, discussing, and complete assignments required by the course.

Pendaftaran Kursus / Course registration

Pendaftaran bagi semua kursus perlu dilakukan pada masa dan tempoh yang ditentukan. Pelajar diwajibkan mendaftar pada tarikh dan tempoh masa yang akan diumumkan oleh Bahagian Pengajian Prasiswazah.

Registration for all courses must be done on time and within a specified period. Students are required to register within the time stipulated by the Undergraduate Studies Division.

Pindah Kredit / Credit transfer

Pindah Kredit hendaklah dipohon sebelum berakhir minggu kedua perkuliahan dan sebarang permohonan selepas tempoh yang telah ditetapkan tidak akan dipertimbangkan. Permohonan Pindah Kredit hendaklah dibuat dengan mengisi Borang BPPs-03 dan disahkan oleh Ketua Jabatan sebelum dihantar untuk mendapat kelulusan daripada Dekan Fakulti Kejuruteraan.

Credit Transfer need to be applied before the end of the second week of lectures and any application after the stated period will not be considered. The application of credit transfer shall be made by filling out the form BPPS-03 and certified by the Head of Department before being submitted for approval by the Dean of the Faculty of Engineering.

Tempoh Pengajian (4 Tahun) / duration of study (4 years)

Program yang ditawarkan oleh Fakulti Kejuruteraan mempunyai tempoh pengajian 4 tahun iaitu bersamaan dengan 8 semester.

Programs offered by the Faculty of Engineering has a duration of 4 years which is equivalent to 8 semesters.

Penilaian / evaluation

Prestasi dalam sesuatu kursus dinilai menurut beberapa kaedah, secara berterusan, termasuk penilaian kerja kursus, tugasan, ujian dan peperiksaan. Prestasi itu ditentukan menurut sistem Purata Nilai Gred (PNG), dan prestasi pelajar bagi setiap peringkat dan keseluruhan diberikan sebagai Purata Nilai Gred Kumulatif (PNGK).


Performance in a course shall be assessed continuously according to several methods, including course work, assignments, tests and examinations. Performance is determined based on Grade Point Average (GPA), and the performance of students in each level and overall given as a Cumulative Grade Point Average (CGPA). Kehadiran Pelajar Ke Kuliah / student attendance to lectures

Fakulti Kejuruteraan menitikberatkan kehadiran pelajar ke kuliah/tutorial/amali. Pelajar yang mempunyai kehadiran kurang daripada 80% tidak akan dibenarkan mengambil peperiksaan semester kecuali pelajar mempunyai sebab yang munasabah atas ketidakhadiran dan tertakluk kepada keputusan Jawatankuasa Pengurusan Fakulti. (Berdasarkan perkara 4.4.1 kelulusan Senat Bil. 5/2008 ke 93 pada 5 Nov 2008)

Faculty of Engineering emphasizes student attendance to lectures / tutorials / practicals. Students who have less than 80% attendance will not be allowed to seat for final exams unless the student has a valid reason for the absences and subject to the decision of the Management Committee of the Faculty. (Based on 4.4.1 the approval of the Senate bill. 5/2008 to 93 in November 5, 2008)

Pre-requisite / requisite / Co-requisite

• A pre-requisite means a course or other requirement that a student must have taken and passed prior to enrolling in a specific course or program• A requisite means a course or other requirement that a student must have taken prior to enrolling in a specific course or program• A co-requisite means a course or other requirement that a student must take at the same time as another course or requirement.


SISTEM MENTOR- MENTEE / mentor-mentee systemPENASIHAT AKADEMIK / aCademiC advisor

UNIMAS sentiasa memberi keutamaan kepada kecemerlangan akademik serta pembangunan sahsiah setiap pelajar. Salah satu pendekatan yang boleh membantu untuk merealisasikan matlamat tersebut ialah dengan mewujudkan hubungan dua hala antara pelajar dan pengajar di setiap fakulti melalui sistem mentor - mentee. Melalui sistem ini, pelajar (mentee) diberi bimbingan dan nasihat oleh pensyarah (mentor) dalam pelbagai aspek terutamanya yang berkaitan dengan hal ehwal akademik. Sistem ini juga mengambil berat terhadap bimbingan lain yang diperlukan oleh pelajar untuk mengharungi cabaran bukan sahaja sebagai seorang pelajar tetapi juga sebagai seorang remaja yang menghadapi perubahan psikologi dan identiti. Mentor memainkan peranan yang penting sebagai Penasihat (Advisor) dan juga Contoh Teladan yang Baik (Positive Role Model) kepada mentee dalam pelbagai aspek. Keberkesanan sistem ini amatlah bergantung kepada komitmen serta kerjasama di antara kedua-dua pihak.

Melaluinya, pelajar dapat diberi bimbingan dan menerima nasihat dalam hal ehwal akademik serta dapat mengenalpasti masalah berkaitan yang boleh menimbulkan masalah akademik untuk dirujuk kepada pihak tertentu yang mempunyai kepakaran untuk menyelesaikan masalah yang dihadapi.

Seorang Penasihat Akademik/mentor boleh membantu pelajar merancang skema pengajian, membuat pemilihan kursus, memahami kurikulum, sistem semester, sistem pendaftaran, sistem peperiksaan dan pengecualian kursus.

Pelajar digalakkan berjumpa terus dengan Penasihat Akademik/mentor masing-masing untuk mendapatkan bimbingan dan nasihat dalam hal ehwal akademik dan masalah berkaitan. Temujanji boleh dilakukan dengan Penasihat Akademik mengikut kesesuaian masa yang telah ditetapkan.

UNIMAS always accentuates the important of academic excellent and personal development of each student. One of the techniques in achieving these aims is by establishing a mutual interrelationship between the student and lecturer in mentor-mentee system in which is already implemented in every faculty in this university. In this system, the student (mentee) is provided with guidance and advice in various aspects by a lecturer (mentor) especially those related to the academic. The system also imparts other guidance needed by the student in confronting the challenges not only as a student but also as a teenager coping with psychological and identity changes. Mentor not only performs an important role as advisor but also as Positive Role Models to the mentee in various aspects. The effectiveness of this system depends immensely on the commitment and cooperation of both mentor and mentee.

In which, in this system, the mentee’s academic affairs is guided and advised as well as identifying any problem that could lead to academic problems. Should there be any problem, the mentee will be referred to other relevant expert in order to unravel and solve the problems.

An academic mentor is able to help mentee of planning a study scheme, selecting courses, understand the curriculum, semester system, registration, examination and course exemption.

The mentee is encouraged to meet their academic mentor personally for guidance and advices in academic affairs and other related problems in which an appointment should be made with the academic mentor prior to the meeting.


Tugas-tugas mentor adalah seperti berikut: Academic Mentor tasks are as follows:

• Membuat perjumpaan dengan mentee – sekurang-kurangnya 2-3 kali sebulan. Set appointments with mentee of at least 2 to 3 times a month.

• Memantau kemajuan akademik serta perkembangan semasa setiap mentee. Monitor academic progress and development for each mentee.

• Mendengar serta memberi bimbingan kepada mentee sekiranya bermasalah. Listen and provide guidance to mentee with problem.

• Menjaga perkara-perkara yang sulit mengenai mentee. Secure mentee confidential matters.

• Merujuk mentee kepada pakar-pakar yang sesuai berhubung penyelesaian masalah-masalah yang khusus.

Refer mentee to appropriate experts for specific problem solving.

• Membantu mentee membuat keputusan dalam hal perancangan akademik dan kerjaya.

Assist mentee to make decisions with regards to academic and career planning.

• Menjaga hubungan baik dengan mentee supaya sistem mentor-mentee ini dapat dilaksanakan dengan berkesan.

Retain a good relationship with mentee for an effective implementation of mentor-mentee system.

• Menyerah slip keputusan peperiksaan kepada mentee pada setiap semester. Disseminate results slip to mentee for every semester.


LATIHAN INDUSTRI / industrial training

Pengenalan / introduction

Pelajar-pelajar yang mengikuti semua program Sarjana Muda Kejuruteraan (Kepujian) adalah diwajibkan menjalani Latihan Industri selama 10 minggu pada tempoh Antarsesi Tahun 3. Perlaksanaan Latihan Industri merangkumi praktikal di industri, penyediaan laporan dan pembentangan serta pemberian markah diadakan dalam satu semester.

Students are required to have a 10 weeks industrial training during their third year, third semester. The industrial training includes an attachment in industry, report preparation and an oral presentation.

Tujuan Latihan Industri / aims of industrial training

a) Mendedahkan pelajar kepada pengalaman dan pengetahuan kejuruteraan yang bersesuaian dan juga kegiatan-kegiatan penyelidikan yang tidak terdapat di bilik-bilik kuliah;

To expose students to real world engineering industrial experience in compliment with classroom activities;

b) Membandingkan dan mengamalkan apa yang dipelajari semasa kuliah dengan keadaan sebenar di luar kuliah;

To allow students to compare and practice knowledge acquired from classroom in real world situation;

c) Mengemukakan pengalaman-pengalaman yang diperolehi semasa Latihan Industri dalam perbincangan di bilik kuliah pada tahun pengajian seterusnya;

To allow students to share their experience from industrial at the next semester;

d) Menyesuaikan pelajar-pelajar dengan alam pekerjaan yang akan ditempuh selepas tamat pengajian;

To prepare students to real working experience after graduation;

e) Mendapat pengalaman dalam membuat laporan kerja-kerja kejuruteraan; To provide students with experience in preparing engineering report;

f) Mendedahkan pelajar kepada tanggungjawab jurutera dan etika kejuruteraan. To expose students to engineering ethic and the responsibility as an engineer;

g) Mendedahkan pelajar kepada bakal-bakal majikan supaya majikan juga dapat mengetahui dengan lebih mendalam program latihan di Universiti Malaysia Sarawak;

To expose students to future employers in such that the employers can have a better understanding of academic programs in Universiti Malaysia Sarawak;

Dengan pengalaman dan pengetahuan, diharap para graduan akan dapat memilih pekerjaan yang bersesuaian dengan minat mereka apabila tamat pengajian kelak.

With the acquired knowledge and experience, graduates could chose a suitable career path after graduation.


PROJEK TAHUN AKHIR / final year ProJeCt

Pengenalan / introduction

Pelajar-pelajar yang mengikuti semua program Sarjana Muda Kejuruteraan (Kepujian) adalah diwajibkan untuk menyiapkan Projek Tahun Akhir sebelum bergraduat. Projek Tahun Akhir akan dibahagikan kepada dua bahagian iaitu Projek Tahun Akhir 1 dan Projek Tahun Akhir 2. Projek Tahun Akhir 1 akan diambil pada Semester 1 Tahun 4 manakala Projek Tahun Akhir 2 akan diambil pada Semester 2 Tahun 4.

Final Year Project is among the compulsory subjects for students to complete a Bachelor Degree in Engineering (Hons), UNIMAS. The Final Year Project is divided into two sections which will be carried out in Semester 1 known as FYP 1 and Semester 2 known as FYP 2, in Year 4 respectively.

Hasil Pembelajaran / learning outcomes

Hasil pembelajaran Projek Tahun Akhir adalah untuk membuktikan The learning outcomes of the Final Year Project will resemble:-

• Keupayaan menunjukkan kebolehan memulakan penyelidikan atau projek reka bentuk.

The ability of students to start a research or design project.

• Keupayaan mengenalpasti bahan rujukan yang berkaitan dengan projek dan mempersembahkannya secara logik dan bersepadu.

The ability of students to identify reference materials that is related to their projects and eventually present these sources in logical and comprehensive manner.

• Keupayaan membangunkan sistem, komponen atau proses untuk menyelesaikan, meningkatkan dan menambahbaik masalah teknikal.

The ability of students to develop a system, component or process that could solve and improve any technical problem.

• Keupayaan menganalisa dan menginterprestasi data dan menjadikan keputusan kepada kesimpulan yang menyeluruh.

The ability of students to analyze and interpret data that could produce results that leads to an acceptable conclusion.

• Keupayaan mengaitkan data yang diinterprestasi dengan bahan rujukan. The ability of students to correlate the interpreted data with any existing reference

sources.

• Keupayaan untuk menunjukkan tanggungjawab profesional dan beretika. The ability of students to reflect professional and ethical responsibility.

• Keupayaan untuk mempersembahkan dan menyatakan penemuan projek. The ability of students to make oral presentation and deliver the findings of the Final

Year Project.


PERSATUAN PELAJAR FAKULTI KEJURUTERAAN (SAFE) /student assoCiation at faCulty of engineering (safe)

Persatuan Pelajar Fakulti Kejuruteraan (SAFE) telah didaftarkan di Bahagian Hal Ehwal Pelajar & Alumni (BHEP&A) UNIMAS dan telah diiktiraf sebagai penerima Anugerah Persatuan Fakulti Terbaik pada Malam Anugerah Pelajar 2007 di bawah kelolaan Dr Abd Razak Abd Karim. Persatuan ini telah bergiat aktif dalam aktiviti dalaman mahupun aktiviti luaran yang telah dianjurkan oleh BHEP&A, UNIMAS. Seterusnya pada tahun 2010, SAFE sekali lagi menerima Anugerah Persatuan Fakulti Terbaik pada Malam Anugerah Pelajar 2010 bawah kelolaan Puan Kasumawati Binti Lias, Encik Aidil Azli Bin Alias dan Encik Ron Aldrino Chan sebagai penasihat SAFE. Selain itu, SAFE turut menyumbang kepada kejuaraan Fakulti Kejuruteraan dalam Kejohanan Sukan UNIMAS (KESUMAS) pada tahun 2009, 2010, 2011, 2012, 2013 dan 2015.

Peringkat awal penubuhan bermula atas inisiatif Prof Madya Dr Awangku Abd Rahman bin Pgn Hj Yusof sebagai Penasihat Pemajuan Pelajar bagi pihak Dekan Fakulti Kejuruteraan dan dikelolai oleh Penasihat Persatuan iaitu Prof Madya Dr Azhaili Baharun. Keahlian persatuan dibuka kepada semua pelajar yang berdaftar di Fakulti Kejuruteraan secara automatik. Ahli-ahli persatuan haruslah bersedia memberi sumbangan dalam segala aspek bagi memastikan objektif persatuan tercapai lebih-lebih lagi bagi mereka yang telah terpilih dan dilantik memegang jawatan-jawatan eksekutif dalam persatuan.

Pada tahun 2010, SAFE dengan kerjasama IEM G & S Sarawak Branch yang dipengerusikan oleh Encik Ron Aldrino Chan telah bersama menubuhkan IEM-SAFE UNIMAS Student Section. Penasihat pertama IEM-SAFE UNIMAS Student Section adalah Puan Kasumawati Binti Lias dan Encik Aidil Azli Bin Alias. Penasihat sekarang adalah Puan Dyg Nur Salmi Dharmiza Binti Awg Salleh. Manakala, IEM Student UNIMAS Chapter berada di bawah kelolaan En Mohd Azrin bin Mohd Said. Pelbagai aktiviti tahunan telah dan akan dijalankan oleh SAFE dan IEM-SAFE UNIMAS Student Section seperti Hari Aluan Fakulti bersama pelajar-pelajar baharu, Program Minggu Hijau, Program Minggu Kejuruteraan, Piala Dekan Fakulti Kejuruteraan, Program Motivasi bersama pelajar- pelajar Sekolah Rendah dan Menengah serta lawatan ke industri.

Student Association at Faculty of Engineering (SAFE) had been registered in the Student Affairs Division & Alumni (BHEPA) UNIMAS and was awarded as The Best Faculty 2007 at Student Award Ceremony 2007 under the supervision of Mr. Abd Razak Abd Karim. The association has participated actively in inter-university or intra-university activities organised by BHEPA, UNIMAS. In year 2010, SAFE once again was awarded as The Best Faculty at Student Award Ceremony 2010 under the supervision of three advisors Mdm Kasumawati Binti Lias, Mr Aidil Azli Bin Alias and Mr Ron Aldrino Chan. Besides, SAFE also contributes to the faculty in becoming the champion for KESUMAS in year 2009, 2010, 2011, 2012, 2013, and 2015.

The association was established and initiated by Prof Madya Dr Awangku Abd Rahman bin Pgn Hj Yusof who was the advisor of the students’ development on behalf of the Dean of the Faculty of Engineering, Prof Madya Dr Azhaili Baharun. Memberships for the association is automatically open to all students registered under the Faculty of Engineering. The members of the association especially for those who were selected and appointed for executive positions in the association must be willing to contribute in all aspects to ensure that the objectives of the association can be achieved.


In 2010, with the help of IEM G&S Sarawak Branch which was chaired by Mr. Ron Aldrino Chan, SAFE has succesfully established the IEM-SAFE UNIMAS Student Section. The first advisor for IEM-SAFE UNIMAS Student Section were Mdm Kasumawati Binti Lias and Mr Aidil Azli Bin Alias. The current advisor is Mdm Dyg Nur Dharmiza Binti Awg Salleh Salmi. Meanwhile, IEM Student UNIMAS Chapter is under the supervision of Mr Mohd Azrin bin Mohd Said. Various activities had been carried out annually by SAFE and IEM-SAFE UNIMAS Student Section such as Faculty Orientation Day, Green Week, Engineering Week, FENG Dean Cup, Motivational programs with primary and secondary school students and also industrial/technical visits.

Objektif Penubuhan Persatuan Pelajar Fakulti Kejuruteraan (SAFE) /objectives of safe:-

1 Untuk melatih dan menonjolkan bakat kepimpinan. To train and accentuate leadership skills.

2 Mengeratkan hubungan di antara pensyarah dan pelajar. To strengthen the bond between students and lecturers.

3 Mendedahkan para pelajar terhadap maklumat yang relevan dalam bidang kejuruteraan daripada program masing-masing di samping meningkatkan mutu akademik pembelajaran yang berkualiti.

To expose students from every department to relevant information in engineering and enhance academic quality.

4 Memberi peluang kepada siswa dan siswi dari Fakulti Kejuruteraan mengambil bahagian secara aktif melalui aktiviti yang disediakan.

Provide opportunities for students from engineering department to actively take part in various activities.

5 Memohon dan menerima derma dan bantuan kewangan serta lain-lain sumbangan bagi mencapai tujuan dan matlamat persatuan.

Provide a platform for the association to apply and receive financial supports and other contributions in order to achieve the objectives and visions of the association.

6 Menegakkan hak-hak sebagai pelajar khususnya di dalam Fakulti Kejuruteraan selagi tidak bertentangan dengan etika Perlembagaan Universiti atau UNDANG-UNDANG MALAYSIA Akta 30-Akta Universiti Dan Kolej Universiti, 1971 bagi kepentingan serta kebaikan pelajar amnya.

Upholding the rights of the students in the Faculty of Engineering without opposing the ethics of university or UNDANG-UNDANG MALAYSIA Akta 30-Akta Universiti Dan Kolej Universiti, 1971 for the importance and benefits of the students.


Penasihat-penasihat SAFE yang terdahulu / Previous advisors of SAFE:

• Prof Madya Dr Awangku Abd Rahman

• Dr Abd Razak Abd Karim

• Ir Dr Mohd Danial Bin Ibrahim

• En Ron Aldrino Chan

• Cik Shamsiah Suhaili

• Puan Kasumawati Binti Lias

• Dr Aidil Azli Bin Alias

• Dr Shafrida Sahrani

• Puan Dyg Nur Salmi Dharmiza bt Awg Salleh

• Puan Shirley Anak Rufus


PROGRAM PENGAJIAN YANG DITAWARKAN Programmes offered

JABATAN KEJURUTERAAN SIVIL / dePartment of Civil engineering

Staf Akademik / academic staff

Ketua Jabatan / head of departmentDr Mohamad Raduan Kabit

[email protected]/ext : 3337

Prof Dr Wan Hashim Wan [email protected]/ext : 1222

Prof Ir Dr Law Puong [email protected]/ext : 3276

Prof Dr Ng Chee [email protected]/ext : 3288

Prof Dr Engr Md. Abdul Mannan, [email protected]/ext : 3223Prof Madya Dr Mohammad Ibrahim Safawi Mohd [email protected]/ext : 3223

Prof Madya Ir Dr Hjh Siti Noor Linda Hj [email protected]/ext : 3325

Sarjana Muda Kejuruteraan Dengan Kepujian(Kejuruteraan Sivil)Bachelor of engineering with honours (Civil engineering)Encik Jethro Henry [email protected]/ext : 3224

Sarjana Kejuruteraan (Sivil)master of engineering (Civil)Dr Raudhah [email protected]/ext : 3305


Pensyarah / lecturers

Ir Dr Abdul Razak Abdul [email protected]/ext : 3320

Ir Dr Norazzlina M.Sa’[email protected]/ext : 3320

Dr Idawati [email protected]/ext : 3307

Ir Dr Leonard Lim Lik [email protected]/ext : 3308


Ir Dr Ting Sim [email protected]/ext : 3279

Dr Darrien Mah Yau [email protected]/ext : 3207

Dr Fauzan [email protected]/ext : -

Dr Gaddafi [email protected]/ext : 1838

Dr Alsidqi [email protected]/ext : 3231

Encik Ron Aldrino Chan@ Ron [email protected]/ext : 3343

Cuti Belajar / study leave

Encik Larry Silas [email protected]/ext : 3343

Puan Norazlina [email protected]/ext : 3343

Encik Abd Azim [email protected]/ext : 2681

Dr Onni Suhaiza [email protected]/ext : 3281

Encik Ahmad Kamal Abdul [email protected]/ext : 3284

Dr Norsuzailina Mohamed [email protected]/ext : 3232

Dr May [email protected]/ext : 3343

Puan Dygku Salma Awg [email protected]/ext : -

Puan Nor Azalina [email protected]/ext : -

Cik Rohaida [email protected]/ext : -

Dr Zamri [email protected]/ext : 3267

Dr Lee Yee [email protected]/ext : 3316

Dr Charles Bong Hin [email protected]/ext : 3294

Puan Rosmina Ahmad [email protected]/ext : -

Puan Azida [email protected]/ext : 3308

Cik Hasmida [email protected]/ext : 3239


1.0 Penubuhan Program / Programme establishment

Pengetahuan dalam kejuruteraan sivil adalah penting untuk melahirkan insan yang kompeten dan berilmu bagi kerja-kerja perancangan, rekabentuk, pembinaan serta pengendalian operasi struktur bangunan, jambatan, pelabuhan, empangan, stesen janakuasa, lebuhraya, landasan keretapi, lapangan terbang, sistem bekalan air, pembuangan sisa, pembentungan serta kawalan banjir dan hakisan. Objektif utama program Kejuruteraan Sivil adalah untuk memenuhi keperluan negara terhadap jurutera-jurutera yang mempunyai pendidikan, latihan dan pengkhususan yang bersepadu dalam bidang kejuruteraan awam yang bertambah sejajar dengan pertumbuhan ekonomi dan proses perindustrian yang pesat sekarang. Ia juga bertujuan melahirkan jurutera yang cekap, bertanggungjawab dan berpandangan jauh serta mempamerkan khidmat profesional yang bermutu tinggi.

Knowledge in Civil Engineering is important in developing highly competent and technically sound engineers in planning, design, construction and operation of building structures, bridges, wharves, dams, power stations, highways, railways, airports, water distribution system, solid waste, wastewater, and flood mitigation and erosion. The main objective of Civil Engineering programme is to meet the nation’s aspiration of having educated, trained and specialized engineers capable of integrating various Civil Engineering fields aligned with the current rapid economic and industrial development growth. The programme is also aimed at generating highly competent, responsible, forward looking and professionalism in the engineering field.

2.0 Matlamat Program / Programme objectives Matlamat program ini adalah untuk menyediakan bakal jurutera-jurutera

yang berkebolehan, cekap dan berkaliber berdasarkan Programme Objective (PEO) Jabatan seperti berikut:

The programme aims to cultivate future engineers who of high caliber based on the following Programme Objectives (PEO):

PEO1 Uphold the professionalism, ethics and responsibility of the Civil Engineering profession.

PEO2 Possess a general education and an understanding of the global demand of civil engineering markets and hence able to promote themselves in the international arena.

PEO3 Extend their knowledge by independent learning and continuing education and contribute to the advancement of the profession through involvement in research and development activities.

PEO4 Promote multicultural harmony and unity amongst different races and cultures by involvement in the technical or non-technical societies.


3.0 Hasil Pembelajaran Program / Programme learning outcomes

Setelah pelajar-pelajar bergraduat dari program ini, mereka berkeupayaan menguasai kebolehan-kebolehan berikut:

Upon graduation, students of the programme are equipped with the following attributes:

PLO1 Apply knowledge of mathematics, science, engineering fundamentals or an engineering specialization to solve complex Civil Engineering problems.

PLO2 Identify, formulate and analyze complex Civil Engineering problems reaching substantiated conclusions using first principles of mathematics, natural sciences and engineering sciences.

PLO3 Design solutions for complex Civil Engineering problems and design systems, components or processes that meet specified needs with appropriate consideration for global, socio-economic and environmental aspects.

PLO4 Conduct investigation into complex Civil Engineering problems utilizing systematic approach to provide valid conclusions.

PLO5 Create, select and apply appropriate techniques, resources and modern engineering and IT tools, to engineering activities, with an understanding of the limitations.

PLO6 Apply reasoning informed by contextual knowledge to assess societal, health, safety and cultural issues and the consequent responsibilities relevant to professional Civil Engineering practice.

PLO7 Understand the impact of professional Civil Engineering solutions in societal and environmental contexts and demonstrate knowledge of and need for sustainable development.

PLO8 Apply ethical principles and commit to professional ethics and responsibilities and norms of Civil Engineering practice.

PLO9 Communicate effectively on Civil Engineering activities with the engineering community and with society at large, such as being able to comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions.

PLO10 Function effectively as an individual, and as a member or leader in diverse teams and in multidisciplinary settings.

PLO11 Recognize the need for, and have the preparation and ability to engage in independent and life-long learning in the broadest context of technological change.

PLO12 Demonstrate knowledge and understanding of Civil Engineering and management principles and apply these to one’s own work, as a member and leader in a team, to manage projects and in multidisciplinary environments and cultivate entrepreneurship skills.


4.0 Konsep Penubuhan Program / Concepts Programme

Program ini menawarkan modul pengkhususan dalam bidang kejuruteraan berikut: The programme offers Civil Engenering modules in the following fields:

(i) Kejuruteraan Geoteknik / geotechnical engineering

Jurutera-jurutera Geoteknik ditugaskan untuk menentukan keadaan subpermukaan bumi sehubung dengan pembinaan struktur-struktur kejuruteraan seperti bangunan, benteng, terowong dan empangan. Rekabentuk dalam bidang ini bergantung kepada penilaian rapi sifat-sifat kejuruteraan bahan tahan dan batuan, dan pertimbangan faktor-faktor yang berkaitan dengan keselamatan dan ekonomi.

Geotechnical Engineers are responsible to identify the earth subsurface structures, in which are the foundations to construction of engineering structures such as buildings, underground pipelines, tunnels and dams. Designs of these structures depend largely on the strength and geologic properties of soil layers, as well as other factors related to safety and economy.

(ii) Kejuruteraan Pembinaan / Construction engineering

Jurutera-jurutera Pembinaan merancang serta menjadualkan sesebuah projek kejuruteraan daripada awal hingga akhir. Mereka ditugaskan untuk memastikan projek tersebut dilaksanakan dengan selamat dalam masa dan belanjawan yang diberi, dan menurut ketentuan rekabentuk. Mereka merancang agihan kerja supaya kerja-kerja dapat dilaksanakan dengan teratur, dan dalam cara yang menjimatkan. Mereka sentiasa peka terhadap suasana projek yang sentiasa berubah supaya sumber bahan dan tenaga yang ada dapat digunakan dalam cara yang paling berkesan.

Construction Engineers overlook an engineering project from planning stage until completion stage of the project. It is their responsibility to ensure the project is conducted as per planned and within the allocated budget, and conformed to given specifications. They manage the workloads and work schedules to ensure that the project runs smoothly and financially sound. They have to be responsive to ever changing natures of the construction processes as the project progresses to make sure the resources and workforce are utilized efficiently.

(iii) Kejuruteraan Struktur / structural engineering

Jurutera-jurutera Struktur ditugaskan untuk merekabentuk struktur-struktur seperti jambatan, bangunan dan stesen janakuasa. Mereka menggunakan bahan-bahan seperti keluli, kayu dan konkrit, dan lazimnya bekerjasama dengan arkitek untuk memastikan struktur indah yang diilhamkan oleh arkitek dapat dibina dan selamat untuk kegunaan atau kediaman manusia.


Structural Engineers are responsible to design structures such as bridges, buildings and power stations. They utilize materials like steel, timber and concrete and work with architects in ensuring the beautiful structures inspired by architects are securely built for occupation.

(iv) Kejuruteraan Sumber Air / Water resources engineering

Jurutera-jurutera Sumber Air menganalisis dan merekabentuk takungan dan bekalan air, sistem penyaliran, empangan, struktur-struktur kejuruteraan sungai, stesen pengepam serta kerja-kerja lain yang berkaitan dengan kejuruteraan sungai dan pantai.

Water Resources Engineers analyze the availability and reliability of water sources and design reservoirs, distribution system, dams, water engineering structures, pump stations and other projects related to river and coastal engineering.

(v) Kejuruteraan Pengangkutan / transportation engineering

Kejuruteraan Pengangkutan menggunakan prinsip-prinsip saintifik dan teknologi untuk perancangan, reka bentuk berfungsi , operasi dan pengurusan kemudahan yang melibatkan aspek-aspek pengangkutan yang selamat, cekap, cepat, selesa, mudah, ekonomi, disamping mengurangkan impak kepada alam sekitar untuk pergerakan manusia serta barangan.

Transportation Engineering is the application of technology and scientific principles to the planning, functional design, operation and management of facilities for any mode of transportation in order to provide for the safe, efficient, rapid, comfortable, convenient, economical, and environmentally compatible movement of people and goods.


STRUKTUR PROGRAM / Programme struCtureKod/Code Kursus/Courses Jam

Kredit/Credit hours

Klasifikasi/Classification

Tahun 1/year 1

Semester 1

KNS1022 Lukisan Kejuruteraan Engineering Drawing 2 T

KNS1042 Bahan Kejuruteraan Sivil Civil Engineering Materials 2 T

KNS1451 Makmal Kejuruteraan Sivil 1 Civil Engineering Laboratory 1 1 T

KNS1633 Mekanik Kejuruteraan Engineering Mechanics 3 T

KNS1472 Pengurusan Kejuruteraan Sivil Civil Engineering Management 2 T

KNF1013 Matematik Kejuruteraan 1 Engineering Mathematics 1 3 T

Semester 2

KNS1063 Kekuatan Bahan* Strength of Materials* 3 T

*requisite - Kns1633 engineering mechanics

KNS1073 Survei Kejuruteraan Engineering Survey 3 T

KNS1102 Geologi Kejuruteraan Engineering Geology 2 T


KNS1482 Kejuruteraan Pemprograman Engineering Programming 2 T

KNF1023 Matematik Kejuruteraan 2** Engineering Mathematics 2** 3 T

**Pre-requisite - Knf1013 engineering mathematics 1

Tahun 2/year 2

Semester 1

KNS2093 Teori Struktur* Theory of Structures* 3 T

*requisite - Kns1063 strength of materials

KNS2113 Mekanik Bendalir Fluid Mechanics 3 T

KNS2123 Mekanik Tanah Soil Mechanics 3 T




Semester 2

KNS2133 Analisis Struktur** Structure Analysis** 3 T

**Pre-requisite - Kns2093 theory of structures

KNS2153 Hidraulik** Hydraulics** 3 T

**Pre-requisite - Kns2113 fluid mechanics

KNS2163 Kejuruteraan Geoteknikal** Geotechnical Engineering** 3 T

**Pre-requisite - Kns2123 soil mechanics


KNS2723 Kaedah Numerikal & Statistik** Numerical Methods & Statistics** 3 T



Kod/Code Kursus/Courses Jam Kredit/Credit hours


Tahun 3/year 3

Semester 1

KNS3143 Hidrologi Kejuruteraan* Engineering Hydrology* 3 T

*requisite - Kns2153 hydraulics

KNS3243 Kejuruteraan Tapak Foundation Engineering 3 T

KNS3493 Kejuruteraan Lebuhraya Highway Engineering 3 T


KNS3643 Rekabentuk Konkrit Bertetulang Reinforced Concrete Design 3 T

**Pre-requisite - Kns2133 structure analysis

Semester 2

KNS3233 Kejuruteraan Air dan Air Sisa Water and Wastewater Engineering 3 T

KNS3433 Kejuruteraan Trafik Traffic Engineering 3 T

KNS3333 Teknologi Pembinaan* ConstructionTechnology* 3 T

*requisite - Kns1472 Civil engineering management


KNS3703 Rekabentuk Struktur Keluli Structural Steel Design 3 T

**Pre-requisite - Kns3742 reinforced Concrete design 1

Antarsesi

KNF3065 Latihan Industri* Industrial Training* 5 T

*requisite - Kns3753 reinforced Concrete design 2

Tahun 4/year 4

Semester 1

KNS4193 Kejuruteraan Sumber Air Water Resources Engineering 3 T

KNS4222 Projek Tahun Akhir 1 Final Year Project 1 2 T

KNS4442 Projek Rekabentuk Bersepadu 1* Integrated Design Project 1* 2 T

*requisite - Kns3243 foundation engineering and Kns3753 reinforced Concrete design 2

KNS4713 Pengurusan Projek Project Management 3 T

KNS4xx3 Elektif Jabatan Department Elective 3 T

Semester 2

KNS4254 Projek Tahun Akhir 2** Final Year Project 2** 4 T

**Pre-requisite – Kns4222 final year Project 1

KNS4673 Projek Rekabentuk Bersepadu 2** Integrated Design Project 2** 3 T

**Pre-requisite - Kns4442 integrated design Project 1

KNS4732 Etika Dalam Kejuruteraan Sivil Ethnics in Civil Engineering 2 T

KNS4xx3 Elektif Jabatan Department Elective 3 T


JABATAN KEJURUTERAAN MEKANIKAL DAN PEMBUATAN /dePartment of meChaniCal and manufaCturing engineering


Ketua Jabatan/ head of departmentDr Shahrol Mohamaddan


Sarjana Muda Kejuruteraan Dengan Kepujian (Kejuruteraan Mekanikal dan Pembuatan)Bachelor of engineering with honours (mechanical and manufacturingengineering)Dr Nur Tahirah [email protected]/ext : 3317

Sarjana Kejuruteraan (Mekanikal)master of engineering (mechanical)Dr Marini [email protected]/ext : 3303

Prof Dr Sinin Hamdan [email protected]/ext : 3225

Prof Dr Amir Azam Khan [email protected]/ext : 3322

Prof Ir Dr Andrew Ragai Henry Rigit [email protected]/ext : 3220

Prof Dr M. Shahidul Islam [email protected]/ext : 3282

Prof Madya Dr Abu Saleh Ahmed [email protected]/ext : 3299

Ir Dr Mohd Danial [email protected]/ext : 3265

Prof Madya Dr Syed Tarmizi Syed Shazali [email protected] /ext : 3296

Dr Ana Sakura Zainal Abidin [email protected] samb/ext : 3306

Prof Madya Dr Abdullah Hj [email protected]/ext : 3324

Penyelaras Program / Programme Coordinator


Ir Dr David Chua Sing [email protected]/ext : 4262

Dr Abang Mohammad Nizam Abang Kamaruddin [email protected]/ext : 3254/3212

Dr Aidil Azli Alias [email protected] samb/ext : 3275


Encik Rasli [email protected]/ext : 3263

Dr Noor Hisyam Noor [email protected]/ext : 3311

Dr Shirley Johnathan [email protected]/ext : 2620

Encik Mohd Azrin Mohd [email protected]/ext : 3226

Encik Abg Mohd Aizuddin Abg Mohd Mohtar [email protected] samb/ext : -

Encik Mohamad Syazwan Zafwan Mohamad Suffian [email protected] samb/ext : 3295

Dr Lidyana [email protected]/ext : 3254

Encik Muhamad Fadzli [email protected]/ext : -

Cik Siti Nor Ain Musa [email protected]/ext : 3496/3310

Encik Ahmad Adzlan Fadzli Khairi [email protected]/ext : -

Puan Mahshuri Yusof [email protected]/ext : 3289

Encik Mohd Syahmi Jamaludin [email protected] samb/ext : -

Dr Khairul Fikri [email protected]/ext : 2618

Dr Magdalene Andrew Munot [email protected]/ext : 3300


Puan Ervina [email protected]/ext : 2603

Encik Mohamad Iskandar [email protected]/ext : 3343

Dr Annisa [email protected]/ext : 4516

Encik Hishammudin Afifi [email protected]/ext : 3228

Dr Nicholas Kuan Hoo [email protected]/ext : 3290


1.0 Penubuhan Program / Programme establishment Keperluan tenaga kerja dalam bidang Kejuruteraan Mekanikal dan

Pembuatan sememangnya amat diperlukan sejajar dengan kedudukannya sebagai bidang pengajian yang tertua, terbesar dan terluas di kalangan negara-negara membangun. Kejuruteraan ini mempunyai pengkhususan yang amat luas merangkumi keperluan tenaga dan petroleum, kajian bahan-bahan, sistem rekabentuk, kajian bendalir dan pengkhususan dalam proses pembuatan. Kajian-kajian ini merupakan nadi kepada pertumbuhan industri dan teknologi. Malaysia sebagai sebuah negara yang membangun pesat amat memerlukan graduan dalam bidang kejuruteraan ini untuk memastikan pembangunan yang berterusan demi mencapai pertumbuhan ekonomi dan industri yang terjamin pada masa akan datang.

Selain itu, berdasarkan Pelan Induk Perindustrian Ketiga (IMP3), Malaysia dijangka merangka strategi untuk mencapai daya saing global jangka panjang melalui transformasi dan inovasi sektor pembuatan dan perkhidmatan yang selari dengan penubuhan program kejuruteraan ini.

Program ini bermatlamat untuk mengeluarkan graduan yang mantap dan mampu untuk menghadapi cabaran dan perubahan dalam kemajuan sains dan teknologi, melahirkan graduan yang berfikiran kritikal dan mempunyai daya penyelesaian masalah yang tinggi, mempersiapkan graduan dengan menunjukkan profesionalism, nilai etika yang mulia serta bermoral di samping berjaya menerapkan ilmu yang dibekalkan, serta melahirkan graduan yang mempunyai daya kepimpinan serta ketrampilan diri yang tinggi, proaktif serta peka kepada keperluan masyarakat dari semasa ke semasa, dan berpandangan jauh untuk menyokong pertumbuhan negara melalui bidang penyelidikan dan pembangunan.

Work force in the field of Mechanical and Manufacturing Engineering is extremely required; this is in accordance with its position as one of the oldest, biggest and widest field of studies in developed countries. This field of engineering covers a wide scope of specialization, including energy and petroleum, materials research, systems design, fluid mechanics research and manufacturing. These research areas are important for the development of industries and technologies. Malaysia, as developing nation requires graduates in the field of Mechanical and Manufacturing Engineering to ensure continuous development to achieve a strong economic and industrial growth in the future.

In addition, according to the Third Industrial Master Plan (IMP3), Malaysia is expected to draft a strategy to achieve long term global competitiveness through transformation and innovation of the manufacturing and service sectors; this is in-line with the development of this programme.

This programme aims to produce graduates who are capable of facing challenges and changes in science and technology, with critical thinking and higher problem solving skills. This program also aims to equip graduates with attributes that include professionalism, ethics and moral values; in addition to the graduates capable of applying the engineering knowledge. Finally, this programme aims to produce graduates with leadership skills, proactive and sensitive to society’s needs and forward looking in order to support the nation’s growth through research and development.


2.0 Matlamat Program / Programme objectives Matlamat program ini adalah untuk menyediakan bakal jurutera-jurutera

yang berkebolehan, cekap dan berkaliber berdasarkan matlamat program; Programme Objective (PEO) seperti berikut.

This programme aims to prepare future graduates with traits as outlined in the following Programme Objective (PEO).

PEO1 Uphold the professionalism and ethics of the Mechanical and Manufacturing Engineering profession in national or international area.

PEO2 Enhance knowledge by practicing independence and life-long learning in order to contribute to the advancement of the profession through involvement in research and development activities.

PEO3 Promote multicultural harmony and unity amongst different races and cultures through involvement in the technical or non-technical societies.

3.0 Hasil Pembelajaran Program / Programme outcomes (Po) Setelah pelajar bergraduat daripada program ini, mereka berkeupayaan

menguasai kebolehan-kebolehan berikut: Upon graduation, students are expected to attain the following:

PO1 Apply knowledge of mathematics, science, engineering fundamentals or an engineering specialization to solve complex Mechanical and Manufacturing Engineering problems.

PO2 Identify, formulate and analyse complex Mechanical and Manufacturing Engineering problems reaching substantiated conclusions using first principles of mathematics, natural sciences and engineering sciences.

PO3 Design solutions for complex Mechanical and Manufacturing Engineering problems and design systems, components or processes that meet specified needs with appropriate consideration for global, socio-economic and environmental aspects.

PO4 Conduct investigation into complex Mechanical and Manufacturing Engineering problems utilizing systematic approach to provide valid conclusions.

PO5 Create, select and apply appropriate techniques, resources and modern engineering and IT tools, to complex Mechanical and Manufacturing Engineering activities, with an understanding of the limitations.

PO6 Apply reasoning informed by contextual knowledge to assess societal, health, safety and cultural issues and the consequent responsibilities relevant to professional Mechanical and Manufacturing Engineering practice and solutions to complex Mechanical and Manufacturing Engineering problems.

PO7 Understand the impact of professional Mechanical and Manufacturing Engineering solutions to complex Mechanical and Manufacturing


problems in societal and environmental contexts and demonstrate knowledge of and need for sustainable development.

PO8 Apply ethical principles and commit to professional ethics and responsibilities and norms of Mechanical and Manufacturing Engineering practice.

PO9 Communicate effectively on complex Mechanical and Manufacturing Engineering activities with the engineering community and with society at large, such as being able to comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions.

PO10 Function effectively as an individual, and as a member or leader in diverse teams and in multi-disciplinary settings

PO11 Recognize the need for, and have the preparation and ability to engage in independent and life-long learning in the broadest context of technological change.

PO12 Demonstrate knowledge and understanding of engineering and management principles and apply these to one’s own work, as a member and leader in a team, to manage projects and in multidisciplinary environments and to cultivate entrepreneurship skills.

4.0 Konsep Penubuhan Program / Programme Concepts

Program ini menawarkan program dalam bidang Kejuruteraan Mekanikal dan Pembuatan untuk menyediakan jurutera-jurutera yang berkebolehan dalam bidang-bidang berikut:

The department offers programme in Mechanical and Manufacturing Engineering which equips engineers in the following fields:

(i) Kejuruteraan Mekanikal / mechanical engineering

Jurutera Mekanikal menjalankan tugas penyelidikan, memberi nasihat dan merekabentuk mesin-mesin pengeluaran, jentera, loji dan peralatan perindustrian. Mereka juga ditugaskan untuk membangunkan sistem perindustrian serta memberi nasihat dan memastikan sistem tersebut berfungsi di samping membuat kerja-kerja penyelenggaraan dan pembaikan jika perlu. Selain itu, jurutera Mekanikal perlu mengkaji dan memberi nasihat berhubung dengan aspek teknologi bahan, produk, proses serta prosedur penyelenggaraan yang tertentu. Jurutera Mekanikal boleh menceburi pelbagai sektor seperti sektor teknologi dan industri pembuatan dan proses, industri rekabentuk sistem mekanikal, produk fabrikasi logam, produk getah dan plastik, industri automotif, industri elektrik dan elektronik serta industri minyak dan gas.

Careers as a Mechanical Engineer are diverse which includes conducting research, giving advice and designing machineries, plants and industrial equipment. They are also responsible for the development of industrial systems, ensuring that the systems function, as well as maintaining the systems. Mechanical Engineers also conduct research and give consultations on materials’ technology and processes, as well as certain maintenance


procedures. Mechanical engineers could practice in sectors that include technology, manufacturing and process, mechanical system design, metal fabrication, rubber and plastic, automotive, electrical and electronic and oil and gas.

(ii) Kejuruteraan Pembuatan / manufacturing engineering Skop kerjaya sebagai seorang jurutera Pembuatan adalah luas dan

mempunyai permintaan yang tinggi terutamanya daripada pihak industri pembuatan. Antara kerjaya utama bagi seorang graduan program kejuruteraan pembuatan adalah bertugas sebagai jurutera Pembuatan di bahagian perancangan dan kawalan mutu, keselamatan industri, penyelenggaraan, atau rekabentuk pengeluaran di firma-firma tempatan dan antarabangsa.

Careers as a Manufacturing Engineer are also diverse and highly demanded by the manufacturing industry. Manufacturing Engineers have high level of technical expertise and skills, which they utilize to plan, design, set-up, modify, optimize and monitor manufacturing processes. Amongst others, a Manufacturing Engineer could work in the quality planning & control section, industrial safety, maintenance or design new systems and processes in local or international companies.


STRUKTUR PROGRAM / Programme struCtureKod/Code Kursus/Courses Jam

Kredit/Credit hours


Tahun 1 / year 1

Semester 1

KNJ1013 Statik Statics 3 T

KNJ1072 Lukisan Kejuruteraan Engineering Drawing 2 T

KNF1013 Matematik Kejuruteraan 1 EngineeringMathematics 1 3 T

KNJ1231 Makmal Kejuruteraan 1 Engineering Laboratory 1 1 T

KNJ1033 Termodinamik 1 Thermodynamics 1 3 T

KNJ1433 Kejuruteraan Bahan Engineering Materials 3 T

Semester 2

KNJ1023 Dinamik* Dynamics* 3 T

*requisite - KnJ1013 statics

KNJ1083 Mekanik Pepejal 1* Solid Mechanics 1* 3 T

*requisite – KnJ1013 statics

KNJ1241 Makmal Kejuruteraan 2* Engineering Laboratory 2* 1 T

*co-requisite – KnJ1023 dynamics, KnJ1083 solid mechanics 1

KNP1091 Praktis Woksyop Workshop Practice 1 T

KNJ1053 Mekanik Bendalir 1 Fluid Mechanics 1 3 T


**Pre-requisite – Knf1013 engineering mathematics 1

Tahun 2 / year 2

Semester 1

KNJ2133 Mekanik Pepejal 2* Solid Mechanics 2* 3 T

*requisite – KnJ1083 solid mechanics 1

KNJ2093 Termodinamik 2* Thermodynamics 2* 3 T

*requisite – KnJ1033 thermodynamics 1

KNJ2472 Teknologi Kejuruteraan Electrical Engineering

Elektrikal Technology 2 T


*requisite - KnJ1033 thermodynamics 1 and co-requisite - KnJ2093 thermodynamics 2






Semester 2

KNJ2103 Mekanik Bendalir 2* Fluid Mechanics 2* 3 T

*requisite – KnJ1053 fluid mechanics 1


*requisites – KnJ1053 fluid mechanics 1 and co-requisite - KnJ2103 fluid mechanics 2

KNJ2453 Kaedah Numerikal dan Statistik** Numerical Methods & Statistic** 3 T


KNP2013 Teknologi Pembuatan Manufacturing Technology 3 T

KNJ2332 Pemprograman Kejuruteraan Engineering Programming 2 T

KNJ2463 Elektronik dan Mikroprosesor Electronics and Microprocessors 3 T

Tahun 3 / year 3

Semester 1

KNP3053 Sistem Pembuatan* Manufacturing Systems* 3 T

*requisites KnP2013 manufacturing technology

KNF3102 Etika Kejuruteraan Engineering Ethics 2 T

KNJ3423 Ekonomi Kejuruteraan dan Engineering Economy

Kewangan* & Finance* 3 T

*requisites - KnJ2453 numerical methods and statistic

KNJ3363 Pemindahan Haba* Heat Transfer* 3 T

*requisites – KnJ1033 thermodynamics 1 and KnJ2093 thermodynamics 2

KNP3483 Rekabentuk Kejuruteraan 1* Engineering Design 1* 3 T

*requisites – KnJ1072 engineering drawing and KnJ2133 solid mechanics 2

Semester 2

KNJ3373 Analisa Unsur Terhingga Finite Element Analysis (FEA) 3 T

KNP3063 Robotik dan Pengautomatan Robotics and Automation 3 T

KNJ 3163 Peralatan dan Kawalan* Instrumentation and Control* 3 T

*requisite KnJ1053 fluid mechanics 1

KNP3493 Rekabentuk Kejuruteraan 2** Engineering Design 2** 3 T

**Pre-requisite – KnP3483 engineering design 1

Semester 3 (Antarsesi)

KNF3065 Latihan Industri Industrial Training 5 T




Tahun 4/ year 4

Semester 1

KNJ4192 Projek Tahun Akhir 1 Final Year Project 1 2 T

KNP4414 Rekabentuk Bersepadu* Integrated Design* 4 T

*requisite - KnP3493 engineering design 2

KNJ4503 Getaran Mekanikal* Mechanical Vibration* 3 T

*requisite - KnJ3163 instrumentation and Control

KNP4073 Sistem Pembuatan Lanjutan* Advanced Manufacturing Systems* 3 T

*requisite - KnP3053 manufacturing systems

KNxxxxx Elektif 1 Elective 1 2 T

Semester 2

KNJ4214 Projek Tahun Akhir 2** Final Year Project 2** 4 T

**Pre-requisite – KnJ4192 final year Project 1

KNP4083 Kawalan Kualiti dan Quality Control & Reliability 3 T

Keboleharapan

KNP4443 Pengurusan Kejuruteraan Engineering Management 3 T

KNxxxxx Elektif 2 Elective 2 2 T

Kursus Teras Elektif Jabatan Yang Ditawarkan / Elective Courses Offered

Semester 1

KNJ4302 Pengkomputeran Dinamik Computational Fluid

Bendalir* Dynamics (CFD)* 2 T

*requisites – KnJ2103 fluid mechanics 2 and KnJ1033 thermodynamics 1

KNP4042 Sumber Tenaga dan Energy Resources and 2 T

Pengurusan* Management* 3 T

*requisites – KnJ1033 thermodynamics 1and KnP2013 manufacturing technology

KNP4342 Penyelidikan Operasi* Operations Research* 2 T

*requisites – KnJ2453 numerical methods & statistic and KnJ3423 engineering economy and finance

Semester 2

KNJ4312 Tribologi Tribology 2 T

KNJ4392 Polimer dan Komposit* Polymer And Composite* 2 T

*requisite – KnJ1433 engineering materials

KNJ4322 Enjin Pembakaran Dalaman* Internal Combustion (IC) Engine* 2 T

*requisite – KnJ2093 thermodynamics 2


JABATAN KEJURUTERAAN ELEKTRIKAL DAN ELEKTRONIK /dePartment of eleCtriCal and eleCtroniC engineering


Ketua Jabatan / head of departmentDr Shafrida Sahrani


Prof Ir Dr Al-KhalidHj [email protected]/ext : 3325

Prof Madya Dr Hushairi Zen [email protected] samb/ext : 3209

Prof Madya Dr Ahmed Mohamed Ahmed [email protected]/ext : 4282

Prof Dr Musse Mohamud [email protected]/ext : 3280

Prof Madya Dr Mohd Saufee Muhammad [email protected]/ext : 3356

Prof Madya Dr Mohamed Abdelmoneim [email protected]/ext : 3277

Prof Madya Dr Wan AzlanWan Zainal [email protected]/ext : 2338

Prof Madya Sakena Abdul [email protected]/ext : 3291

Sarjana Muda Kejuruteraan (Kepujian) Elektronik (Telekomunikasi) Bachelor of engineering (hons) in electronics (telecommunications)Dr Kho Lee [email protected]/ext : 3301



Sarjana Kejuruteraan (Sistem Komunikasi)master of engineering (Communication systems)Ir Dr Kismet Anak Hong [email protected]/ext : 3233

Sarjana Muda Kejuruteraan (Kepujian) Elektronik (Komputer) Bachelor of engineering (hons) in electronics (Computer) Dr Siti Kudnie [email protected]/ext : 3264

Prof Madya Dr Thelaha [email protected]/ext : 3391

Sarjana Muda Kejuruteraan (Kepujian) Kejuruteraan Elektrikal dan ElektronikBachelor of engineering (hons) electrical and electronics engineering Encik Mohd Ridhuan Mohd [email protected]/ext : 2633

Ir Dr David Bong Boon [email protected]/ext : 3313


Dr Dayang Azra Awang [email protected]/ext : 3309

Dr Rohana [email protected]/ext : 3285

Dr Ngu Sze [email protected]/ext : 3304

Dr Abdul Rahman [email protected]/ext : 3343

Dr Dyg Norkhairunnisa Abang [email protected]/ext : 4300

Dr Martin [email protected]/ext : 3237

Dr Annie [email protected]/ext : 3211

Dr Tay Kai [email protected]/ext : 3297

Dr Yanuar Zulardiansyah [email protected]/ext : 2622

Dr Yonis. M. Yonis [email protected]/ext : 4278

Encik Hazmi Hijazi Abdul [email protected]/ext : 3298

Dr Ade Syaheda Wani [email protected]/ext : 3343

Dr Norhuzaimin [email protected]/ext : 3326

Dr Tengku Mohd Afendi [email protected]/ext : 3266

Encik Abdul Hafiz Abdul [email protected]/ext : 3270

Encik Azfar Satari [email protected]/ext : 4230

Ir Hazrul Mohamed [email protected]/ext : 2657

Puan Kasumawati [email protected]/ext : 3380

Dr Kuryati [email protected]/ext : 3285

Encik Mohd Hafiez Izzwan [email protected]/ext : 3274

Encik Mohd FaizrizwanMohd [email protected]/ext : 2074

Puan Maimun Huja [email protected]/ext : 2672

Ir Rudiyanto Philman [email protected]/ext : 2608

Dr Nordiana [email protected]/ext : 3277


Puan Nurul ‘Izzati [email protected]/ext : -

Puan Nazreen [email protected]/ext : 3222

Puan Dyg Nur Salmi Dharmiza Awg [email protected] samb/ext : -

Puan Nurdiani [email protected]/ext : 3350


Puan Nur Alia Athirah Hj. [email protected]/ext : 3318

Encik Ng Liang [email protected]/ext : 3269

Puan Sharifah MasniahWan [email protected]/ext : 3357

Encik Asrani [email protected]/ext : -

Cik Shamsiah [email protected]/ext : 4235

Puan Shirley Anak [email protected]/ext : -



Kejuruteraan elektrikal dan elektronik adalah satu bidang professional yang penting di Malaysia di mana ia telah dikenalpasti sebagai pemangkin kepada aktiviti-aktiviti awam, swasta ataupun keperluan sektor-sektor industri elektrikal dan elektronik yang boleh menyumbang kepada ekonomi negara. Dengan adanya program ini, adalah diharapkan ia dapat menampung masalah kekurangan tenaga professional dalam bidang kritikal ini.

Electrical and electronics engineering is an important field of professional Malaysia where it has been identified as the catalytic activities of public or private sector needs electrical and electronics industry that can contribute to the national economy. With this program, it is hoped that it can accommodate the shortage of professionals in this critical field.

2.0 Matlamat Program / Program objectives

Matlamat program ini adalah untuk menyediakan bakal jurutera yang berkebolehan, cekap dan berkaliber berdasarkan Programme Objective (PEO) Jabatan seperti berikut:

PROGRAM KEJURUTERAAN ELEKTRIKAL DAN ELEKTRONIK /Programme of eleCtriCal and eleCtroniCS engineering

The aim of this program is to prepare future engineers who are capable, competent and high caliber based Programme Objective (PEO) Department as follows:

3.0 Hasil Pembelajaran Program / Programme outcomes

Setelah pelajar-pelajar bergraduat dari program ini, mereka berkeupayaan menguasai kebolehan-kebolehan berikut:

Upon graduation from the programme, the students are expected to acquire the following attributes:

PO1 Apply knowledge of mathematics, natural science, engineering fundamentals and an engineering specialization to solve complex Electrical and Electronics problems;

PO2 Identify, formulate, conduct research literature and analyze complex Electrical and Electronics engineering problems reaching substantiated conclusions using first principles of mathematics, natural sciences and engineering sciences;

PO3 Design solutions for complex Electrical and Electronics engineering problems and design systems, components or processes that meet specified needs with appropriate consideration for public health and safety, cultural societal and environment considerations;

PEO1 Apply Electrical and Electronics Engineering knowledge based on a solid foundation in Electrical and Electronics Engineering areas for the needs of the stakeholders.

PEO2 Uphold the importance of professionalism and ethics in Electrical and Electronics Engineering profession to form a cultured and more developed society.

PEO3 Practice leadership and management skills in workplace and/or society.


PO4 Conduct investigation into complex Electrical and Electronics engineering problems using research-based knowledge and reseach method including design of experiments, analysis and interpretation of data, and synthesis of information to provide valid conclusions;

PO5 Create, select and apply appropriate techniques, resources and modern engineering and IT tools, including prediction and modelling to complex Electrical and Electronics engineering problems, with an understanding of the limitations;

PO6 Apply reasoning informed by contextual knowledge to assess societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to professional Electrical and Electronics engineering practice and solutions to complex Electrical and Electronics engineering problems;

PO7 Understand and evaluate the sustainablity and impact of professional Electrical and Electronics engineering works in the solutions of complex Electrical and Electronics engineering problems in societal and environmental contexts;

PO8 Apply ethical principles and commit to professional ethics and responsibilities and norms of Electrical and Electronics engineering practice;

PO9 Communicate effectively on complex Electrical and Electronics engineering activities with the engineering community and with society at large, such as being able to comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions;

PO10 Function effectively as an individual and as a member or leader in diverse teams in multi-disciplinary settings.;

PO11 Recognize the need for, and have the preparation and ability to engage in independent and life-long learning in the broadest context of technological change.;

PO12 Demonstrate knowledge and understanding of engineering and management principles and economic decision making, and apply these to one’s own work, as a member and leader in a team, to manage projects and in multidisciplinary environments.

4.0 Konsep Penubuhan Program / Programme Concepts

Kerajaan Negeri Sarawak telah mengumumkan koridor ekonomi baru iaitu Sarawak Corridor of Renewable Energy (SCORE) yang berpusat di sepanjang pantai dari Tanjung Manis ke Samalaju. UNIMAS selaku sebuah pusat penyelidikan dan pembangunan sumber manusia di negara ini, telah terpanggil untuk memperhebatkan pembangunan modal insan khususnya jurutera di dalam bidang elektrikal dan elektronik bagi menampung keperluan tenaga mahir dan professional. Program kejuruteraan elektrikal dan elektronik ini ditawarkan bagi melahirkan graduan yang memenuhi keperluan tenaga manusia dalam sector kejuruteraan penjanaan, pengagihan dan penghantaran kuasa, kejuruteraan elektrik dan elektronik yang lain.

Sarawak state government has announced a new economic corridor

Sarawak Corridor of Renewable Energy (SCORE) which is centered along the coast from Tanjung Manis to Samalaju. UNIMAS as a center of research and development of human resource in the country, has called for human capital development especially in the field of electrical and electronics engineering to accommodate skilled workers and professional purposes. Electrical and electronics program is offered for to produce graduate that meets the needs of manpower in electrical and electronics sector and power generation, distribution and delivery sector.




Tahun 1/year 1

Semester 1

KNR1723 Teori Litar 1 Circuit Theory 1 3 T

KNR1073 Peralatan Elektrik Electrical Instrumentation 3 T

KNR1743 Pemprograman Berorientasikan Objek Object Oriented Programming 3 T

KNF1013 Matematik Kejuruteraan 1 Engineering Mathematics I 3 T

KNR1042 Peralatan dan Pengukuran Instrumentation and Measurement 2 T

Semester 2

KNR1733 Teori Litar 2 Circuit Theory 2 3 T

KNR1063 Elektronik Digital Digital Electronics 3 T

KNR1053 Elektronik Analog Analog Electronics 3 T


KNR1082 Asas Rekabentuk Kejuruteraan Engineering Design Foundation 2 T

**Pre-requisite-Knf1013 engineering mathematics 1

Tahun 2/year 2

Semester 1

KNR2113 Isyarat dan Sistem Signals & Systems 3 T

KNR2463 Keselamatan dan Kesihatan Safety and Health in Engineering 3 T

Dalam Kejuruteraan

KNR2443 Teknologi Kejuruteraan Electrical Engineering Technology 3 T

Elektrikal


KNR2452 Aplikasi Elektronik Analog Analog and Digital Electronic 2 T

dan Digital Applications


Semester 2

KNR2103 Prinsip Kejuruteraan Telecommunication Engineering 3 T

Telekomunikasi Principles

KNR2153 Mesin Elektrikal Electrical Machines 3 T

KNR2433 Teori Elektromagnet Electromagnetic Theory 3 T

KNR2473 Kaedah Numerikal dan Statistik** Numerical Method and Statistics** 3 T

KNR2753 Arkitektur Sistem Komputer Computer Systems Acrhitecture 3 T


Tahun 3/ year 3

Semester 1

KNR3183 Kejuruteraan Sistem Kawalan Control System Engineering 3 T

KNR3193 Mikropemproses Microprocessor 3 T

KNR3233 Sistem Elektrikal Kuasa Electrical Power System 3 T


KNR3492 Makmal Elektrikal 1 Electrical Lab 1 2 T

STRUKTUR PROGRAM / Programme struCture




Semester 2

KNR3483 Kualiti Kuasa dan Kebolehpercayaan Power Quality and Reliability 3 T

KNR3243 Elektronik Kuasa Power Electronics 3 T

KNR3522 Makmal Elektrikal 2 Electrical Lab 2 2 T

KNR3762 Projek Rekabentuk Bersepadu 1 Integrated Design Project 1 2 T

Electrical Option / Pilihan Elektrikal

KNR3503 Perlindungan Sistem Kuasa Power System Protection 3 T

KNR3513 Analisis Sistem Kuasa Power System Analysis 3 T

Electronic Option / Pilihan Elektronik

KNR3693 Pemprosesan Isyarat Digital Digital Signal Processing 3 T

KNR3703 Mikroelektronik Microelectronics 3 T

Antarsesi


tahun 4 / year 4

Semester 1

KNR4553 Pengurusan Kejuruteraan Engineering Management 3 T

KNR4272 Projek Tahun Akhir 1 Final Year Project 1 2 T

KNR4xx3 Elektif Jabatan 1 Department Elective 1 3 T

KNR4543 Projek Rekabentuk Bersepadu 2 Integrated Design Project 2 3 T

**Pre-requisite – Knr3762 integrated design Project 1

semester 2

KNR4344 Projek Tahun Akhir 2 Final Year Project 2 4 T

**Pre-requisite – Knr4272 final year Project 1

KNR4593 Teknologi Voltan Tinggi High Voltage Technology 3 T

KNR4xx3 Elektif Jabatan 2 Department Elective 2 3 T

Kursus Teras Elektif Jabatan Yang Ditawarkan / elective Courses offered

Kuasa / Power

KNR4303 Teknologi Tenaga Boleh Diperbaharui Renewable Energy Technology 3 T

KNR4373 Perancangan dan Ekonomi Tenaga Energy Economics and Planning 3 T

KNR4603 Penghantaran dan Pengagihan High Power Transmission and 3 T

Kuasa Tinggi Distribution

Telekomunikasi / telecommunication

KNR4653 Komunikasi Gentian Optik Optical Fiber Communication 3 T

KNR4663 Sistem Telekomunikasi Tanpa Wayar Wireless Telecommunication System 3 T

KNR4673 Teknologi Gelombang Mikro Microwave and Antenna 3 T

dan Antenna Technology

KNR4683 Rangkaian Komputer dan Data Data and Computer Networking 3 T


Komputer / Computer

KNR4613 Rekabentuk VLSI VLSI Design 3 T

KNR4623 Rekabentuk Sistem Embedded Embedded System Design 3 T

KNR4633 Pembelajaran Mesin Machine Learning 3 T

KNR4643 Pemprosesan Imej Image Processing 3 T


JABATAN KEJURUTERAAN KIMIA DAN SUSTAINABILITI TENAGA /dePartment of ChemiCal engineering and energy sustainaBility


Ketua Jabatan / head of departmentProf Madya Dr Rubiyah Baini


Prof Madya Dr ShantiFaridah [email protected]/ext : 3338

Sarjana Muda Kejuruteraan Dengan Kepujian(Kejuruteraan Kimia)Bachelor of Engineering with Honours (Chemical Engineering)Dr Josephine Lai Chang [email protected]/ext : 3343

Dr Md Rezaur [email protected]/ext : 3302

Prof Madya Dr [email protected]/ext : 3266

Dr Nazeri Abdul Rahman [email protected] samb/ext : 3479

Prof Dr Mohammad Omar Abdullah [email protected]/ext : 3349

Cik Nur Amalina Shairah Abdul Samatasnamalina @unimas.mySamb/ext : 3273

Dr Hafizah Abdul Halim [email protected]/ext : 2682

Ir Dr Lim Soh [email protected]/ext : 3293

Encik Harunal Rejam [email protected]/ext : 4273



Dr Ivy Tan Ai [email protected]/ext : 3312

Sarjana Kejuruteraan (Kimia)master of engineering (Chemical)Dr Norfamila Che [email protected]/ext : 2696


Encik Mohd Farid Atan [email protected]/ext : -


Encik Mohamed Afizal Mohamed [email protected]/ext : -

Puan Noraziah Abdul [email protected]/ext : 3454

Puan Nur Syuhada Ahmad [email protected]/ext : -

Cik Siti Hazirah [email protected]/ext : 3343

Puan Norlisa [email protected]/ext : 3462

Encik Ibrahim [email protected]/ext : -

Encik Khairul Anwar Mohd [email protected]/ext : 3235



Program ini menawarkan kursus-kursus kejuruteraan kimia yang menjurus ke arah kepakaran kejuruteraan aplikasi tenaga dan sumber-sumber asli yang banyak terdapat di negara kita. Sumber-sumber asli seperti minyak, gas, arang batu, hasil pertanian serta tenaga alternatif boleh diusahakan dan dimajukan lagi demi manfaat negara. Masalah pengurusan tenaga dan pencemaran berhubung dengan pemprosesan sumber-sumber asli tersebut seperti pencemaran udara, air dan persekitaran lainnya memerlukan pengetahuan kejuruteraan yang terkini. Seiring dengan kemajuan pesat negara, semestinya lebih banyak jurutera kimia diperlukan untuk menampung kekurangan tenaga profesional tersebut.

This program offers chemical engineering courses which are focusing more on the specialization in energy engineering application and natural resources which are abundance in our country. Natural resources such as oil, gas, fossil, agricultural products biochemistry as well as renewable energy have the potential to be utilised and developed for the benefit of the country. In order to solve the problems in energy management and pollution which is related to these natural resources processes namely air, water and environmental pollution, require the latest knowledge in engineering. In line with country rapid development, more chemical engineers are needed to cater for the inadequacy of this prefoessional.


Matlamat program ini adalah untuk menyediakan bakal jurutera yang berkebolehan, cekap dan berkaliber berdasarkan Programme Objective (PEO) Jabatan seperti berikut:

The goal of this program is to produce future engineer who is skillful, efficient and high caliber based on the department programme objectives as follows:

3.0 Hasil Pembelajaran Program / Programme outcomes Setelah pelajar-pelajar bergraduat daripada program ini, mereka

berkeupayaan menguasai kebolehan-kebolehan berikut:

Students will be able to achieve the following programme outcomes upon their graduation:

PO1 Apply knowledge of mathematics, natural science, engineering fundamentals and an engineering specialization to the solution of complex Chemical Engineering problems

PO2 Identify, formulate, conduct research literature and analyse complex Chemical Engineering problems reaching substantiated conclusions using first principles of mathematics, natural sciences and engineering sciences

PO3 Design solutions for complex Chemical Engineering problems and design systems, components or processes that meet specified needs with appropriate consideration for public health and safety, cultural, societal and environmental considerations

PEO1 Graduates are able to apply engineering knowledge at their respective career.

PEO2 Graduates are able to pursue their career in national and multinational organisations.

PEO3 Graduates are competent to explore, utilise and diversify natural resources sustainably.

PEO4 Graduates utilise engineering tools and skills necessary to perform job as professional in their workplace.


PO4 Conduct investigation of complex Chemical Engineering problems using research-based knowledge and research methods including design of experiments, analysis and interpretation of data, and synthesis of information to provide valid conclusions

PO5 Create, select and apply appropriate techniques, resources and modern engineering and IT tools, including prediction and modelling, to complex Chemical Engineering problems, with an understanding of the limitations

PO6 Apply reasoning informed by contextual knowledge to assess societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to professional Chemical Engineering practice and solutions to complex Chemical Engineering problems

PO7 Understand and evaluate the sustainability and impact of professional Chemical Engineering work in the solutions of complex Chemical Engineering problems in societal and environmental contexts.

PO8 Apply ethical principles and commit to professional ethics and responsibilities and norms of Chemical Engineering practice

PO9 Communicate effectively on complex engineering activities with the engineering community and with society at large, such as being able to comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions

PO10 Function effectively as an individual, and as a member or leader in diverse teams and in multidisciplinary settings

PO11 Demonstrate knowledge and understanding of engineering management principles and economic decision making and apply these to one’s own work, as a member and leader in a team, to manage projects in multidisciplinary environments and to cultivate entrepreneurship skills

PO12 Recognize the need for, and have the preparation and ability to engage in independent and life-long learning in the broadest context of technological change

4.0 Konsep Penubuhan Program / Programme Concepts Program ini menawarkan modul pengkhususan dalam bidang kejuruteraan

kimia. Kejuruteraan kimia adalah satu bidang profesional yang penting di mana ia telah dikenalpasti sebagai pemangkin kepada aktiviti-aktiviti awam, swasta ataupun keperluan sektor-sektor industri kimia yang boleh menyumbang kepada ekonomi negara.

This programme offers specialization in chemical engineering field. Chemical Engineering is an important professional field which has been acknowledged as the catalyst to the public and private sector activities or to the needs of the chemical industry sectors which contributes to the economy of the country.


Kod/Code

Kursus/Courses Jam Kredit/Credit hours


Tahun 1/year 1

Semester 1

KNC1013 Mekanik Bendalir Fluid Mechanics 3 T

KNC1023 Kejuruteraan Kimia Fizikal Engineering Physical Chemistry 3 T

KNC1032 Lukisan Kejuruteraan Engineering Drawing 2 T

KNC1041 Amalan Bengkel Workshop Practice 1 T

KNC1472Pengenalan kepada KejuruteraanKimia

Introduction to Chemical Engineering 2 T

KNC1482 Matematik Kejuruteraan 1** Engineering Mathematics 1** 3 T

Semester 2

KNC1052 Pemprograman Kejuruteraan Engineering Programming 2 T

KNC1063 Kejuruteraan Kimia Organik Engineering Organic Chemistry 3 T

KNC1073 Termodynamik 1 Thermodynamics 1 3 T

KNC1101 Makmal Kejuruteraan Kimia 1 Chemical Engineering Laboratory 1 1 T

KNC1492 Matematik Kejuruteraan 2** Engineering Mathematics 2** 2 T

**Pre-requisite KnC1482 matematik Kejuruteraan 1

KNC1503 Keseimbangan Bahan Mass Balance 3 T

Tahun 2/year 2

Semester 1

KNC2113 Termodinamik 2 Thermodynamics 2 3 T

KNC2123 Pemindahan Haba dan Bahan Heat and Mass Transfer 3 T

KNC2133 Kimia Analitikal Analytical Chemistry 3 T


KNC2513 Keseimbangan Tenaga Energy Balance 3 T

Semester 2

KNC2093 Kejuruteraan Bahan dan Polimer Material and Polymer Engineering 3 T

KNC2153 Proses Pemindahan Transport Process 3 T

KNC2443 Kaedah Numerikal dan Statistik** Numerical Methods and Statistics** 3 T

**Pre-requisite - KnC1492 matematik Kejuruteraan 2

KNC2462 Instrumentasi Proses Process Instrumentation 2 T

KNC2523 Unit Operasi 1 Unit Operations 1 3 T





Tahun 3/ year 3

Semester 1


KNC3203 Proses Tindak Balas Kimia Chemical Reaction Process 3 T

KNC3213 Sistem Kawalan Proses Process Control System 3 T

KNC3453 Pengurusan Kejuruteraan Engineering Management 3 T

KNC3533 Unit Operasi 2 Unit Operations 2 3 T


Semester 2


KNC3262 Ekonomi Kejuruteraan Engineering Economics 2 T

KNC3413 Pengintegrasian dan Pengoptimuman Proses

Process Integration and Optimization

3 T

KNC3543 Keselamatan dan Kesihatan Pekerjaan

Occupational Safety and Health 3 T

KNC3553 Projek Rekabentuk Bersepadu 1 Integrated Design Project 1 3 T

Antarsesi


Tahun 4/ year 4

Semester 1

KNC4233 Kejuruteraan Alam Sekitar Environmental Engineering 3 T

KNC4283 Sumber Tenaga dan Aplikasi Energy Resources and Applications 3 T

KNC4312 Pengurusan Tenaga dan Alam Sekitar

Energy and Environmental Management

2 T

KNC4322 Projek Tahun Akhir 1 Final Year Project 1 2 T

KNC4564 Projek Rekabentuk Bersepadu 2** Integrated Design Project 2** 4 T

**Pre-requisite KnC3553 Projek rekabentuk Bersepadu 1

Semester 2

KNC4293 Kawalan Kualiti dan Keboleharapan Quality Control and Reliability 3 T

KNC4344 Projek Tahun Akhir 2 Final Year Project 2** 4 T

**Pre-requisite KnC4322 Projek tahun akhir 1

KNC4xx3 Kursus Elektif 1 Elective Course 1 3 T

KNC4xx3 Kursus Elektif 2 Elective Course 2 3 T




Kursus Teras Elektif Jabatan Yang Ditawarkan / Elective Courses Offered

Tahun 1/year 1

Semester 1

KNC4353 Biodiesel dan Fuel Cell untuk Biodiesel and Fuel Cell for

Pengangkutan Transportation 3 T

KNC4393 Sustainabiliti dalam Industri Sustainability in Energy

Tenaga Industry 3 T

KNC4383 Kejuruteraan Gas Asli Natural Gas Engineering 3 T

KNC4423 Sistem Multi Fasa Multiphase Systems 3 T

KNC4363 Tenaga -Bio Bio-Energy 3 T

KNC4373 Kejuruteraan Rawatan Air dan Water and Wastewater Treatment

Sisa Air Engineering 3 T

KNC4403 Teknologi Pemprosesan dalam Processing Technology in

Industri Industry 3 T

KNC4433 Asas Reologi Fundamental Rheology 3 T

KNC4333 Polimer Untuk Aplikasi Polymer for Engineering

Kejuruteraan Applications 3 T


Prof Madya Dr Azhaili [email protected]/ext : 3267

Puan Yon Syafni [email protected]/ext : 7503

Penyelaras Program(1 September 2018)Encik Zayn Al-Abideen [email protected]/ext : 4371

Ar. Awang Hasim Awang [email protected]/ext : 3343

Dr Atta Idrawani [email protected]/ext : 3343

Timbalan Dekan(1 September 2018)Prof Madya Dr Siti Halipah [email protected]/ext : 3283

Puan Dona Rose Amer [email protected]/ext : 3343

JABATAN SENIBINA / dePartment of arChiteCtureStaf Akademik / academic staff

Penyelaras Program / Programme CoordinatorKetua Jabatan (1 September 2018)

Sarjana Muda Sains (Kepujian) SenibinaBachelor of science (hons.) architectureDr Bambang [email protected]/ext : 7343

Ketua Jabatan (Jabatan Senibina)

head of department (department of architecture)

Dekan Fakulti Alam Bina (1 September 2018)Prof Ar Nurakmal Abdullah Goh




Untuk mewujudkan program Senibina di UNIMAS yang merangkumi sumber, budaya dan kepelbagaian persekitaraan di rantau ini sebagai pelopor pendekatan holistik alam bina. Berhadapan dengan isu global yang melibatkan perubahan iklim, petempatan dan kepupusan spesies, kemiskinan bandar dan transformasi luar bandar, senibina perlu mengambil kira aspek kemampanan yang melibatkan penduduk tempatan, budaya dan penempatan untuk mewujudkan alam bina yang kekal dan maju dengan mengambil kira aspek global dan amalan penduduk Sarawak yang unik.

To set forth an Architecture programme at UNIMAS that draws upon the special material, cultural and ecological circumstances of our locality to pioneer holistic approaches to the built environment. Faced with global issues of climate change, habitat and species loss, urban poverty and rural transformation, architecture needs to embrace a sustainability that is informed by indigeneity of people, culture and land to create a lasting, flourishing built environment that is global in outlook and uniquely Sarawakian in practice.

2.0 Objektif Program / Program objectives

Objektif program ini adalah untuk menyediakan graduan yang serba boleh dan bertanggungjawab dengan fikiran jujur, beretika dan kreatif dalam mempromosikan Seni Bina untuk kemanusiaan dan kemajuan pengetahuan, guna memenuhi permintaan kakitangan teknikal dalam industri bangunan serta menyediakan mereka untuk melanjutkan pengajian mereka untuk ijazah profesional untuk menjadi seorang Arkitek berdasarkan Programme Objective (PEO) Jabatan seperti berikut:

The aim of this program is to prepare graduates with honest, ethical and creative mind in promoting Architecture for humanity and the advancement of knowledge, to meet the demand for technical staff in the building industry and as to prepare them to continue their study for the professional degree to be an Architect as stated in the Programme Objective (PEO) as follows :

PEO1 To produce semi-professional graduates capable of advancing

technology and driving innovation in the field of architecture.

PEO2 To enable semi-professional graduates to focus on the process of design, discovering, through experiment, methods of working that develop aesthetic judgment and means of self-evaluation.

PEO3 To cultivate and set forth an ethical attitude in the workplace as the basis for the development and advancement of the Architectural profession among graduates.

PEO4 To produce semi-professional graduates who are versatile, entrepreneurial, responsible and knowledgeable in the building industry for the progress of the nation.


3.0 Hasil Pembelajaran Program / Programme outcomes Setelah pelajar-pelajar bergarduat dari program ini, mereka berkeupayaan

menguasai kebolehan-kebolehan berikut :

Upon graduation from the programme, the students are expected to acquire the following attributes :

PO1 Describe key architectural works, cultural movements and ideas, their theoretical and cultural context and relevance to design.

PO2 Apply the technical aspects of architectural technology to analyse, evaluate and make informed judgments on a wide range of architectural problems and situations.

PO3 Integrate architectural knowledge into socially meaningful design responses.

PO4 Integrate a body of practical and theoretical knowledge into design with emphasis on human needs and requirements.

PO5 Demonstrate and articulate design skills from concept formation until design development.

PO6 Communicate complex design ideas through verbal, visual, digital and written media.

PO7 Derive cost implication of design options and evaluate environmental factors affecting the built environment.

PO8 Apply and integrate knowledge of architectural theory, culture, design pedagogy and legislation toward professional practice and entrepreneurial activity in the field of architectural discipline.

4.0 Konsep Penubuhan Program / Programme Concept Program senibina akan menyokong visi dan misi UNIMAS dengan

menambah bidang kajian utama yang belum wujud pada ketika ini. Dengan pelaksanaan sedemikian, ia akan menjadikan UNIMAS sebagai institusi pilihan bagi mereka yang ingin mengikuti pengajian alam bina dan meningkatkan pengetahuan melalui penyelidikan dan pembelajaran dalam bidang ini. Senibina merupakan satu disiplin yang berperanan sebagai tonggak budaya, manakala karya-karya seni bina yang monumental adalah antara manifestasi fizikal yang kekal dan simbolik bagi kemakmuran negara dan manusia sejagat.

Hasil pembelajaran direka untuk menangani lapan domain penting

yang meliputi pengetahuan, kemahiran praktikal, kemahiran sosial, kemahiran komunikasi, kepimpinan dan kerja berpasukan, pengurusan maklumat, pembelajaran sepanjang hayat, kemahiran pengurusan dan keusahawanan.

The architecture programme will support the vision and mission of UNIMAS


by adding a vital area of study that is currently unavailable. Doing so will make UNIMAS an institution of choice for those pursuing studies in built environment and stimulate the production of knowledge through research and scholarship in this field. Architecture as a discipline is a pillar of culture in its role as “mother of the arts,” while monumental works of architecture are among the most lasting and symbolically meaningful physical manifestations of national prosperity available to the human race.

The learning outcomes are designed to address the eight important domains

which cover knowledge, practical skills, social skills, communication skills, leadership and team work, information management, lifelong learning, managerial and entrepreneurial skills.




Tahun 1/year 1

Semester 1

BEA 1016 Studio Rekabentuk Senibina 1 Architecture Design Studio 1 6 T

BEA 1023 Lukisan Senibina Architectural Drawing 3 T

BEA 1033 Komunikasi Grafik Graphic Communication 3 T

BEA 1043 Fizik Persekitaran Environmental Physics 3 T

Semester 2


BEA 1063 Lukisan Senibina Bantuan Komputer Computer Aided Architectural Drafting 3 T

BEA 1073 Sejarah Senibina 1 History of Architecture 1 3 T

BEA 1083 Teknologi Bangunan 1 Building Technology 1 3 T

**Pre-requisite

Tahun 2/year 2

Semester 1


BEA 2103 Sejarah Senibina 2 History of Architecture 2 3 T

BEA 2113 Survei Struktur Senibina Survey of Architectural Structure 3 T

BEA 2123 Senibina Digital 1 Digital Architecture 1 3 T

BEA xxx3 Kursus Elektif 1 Elective Course 1 3 T


Semester 2



BEA 2153 Perkhidmatan Bangunan 1 Building Services 1 3 T

Antarsesi / Intersession

BEA 2166 Latihan Industri Industrial Training 6 T



Tahun 3 / Year 3

Semester 1



BEA 3194 Senibina Digital 2 Digital Architecture 2 4 T



Semester 2


BEA 3223 Undang-undang dan Amalan Senibina Architectural Law and Practice 3 T

BEA 3233 Analisis Struktur Structure Analysis 3 T




BEA 2243 Senibina dan Bentuk Architecture and Form 3 T

BEA 3253 Penempatan Manusia Human Settlement 3 T

BEA 3263 Senibina dan Ekologi Architecture and Ecology 3 T

BEA 3273 Masalah Senibina Hijau Green Architecture Problems 3 T

BEA 3283 Rekabentuk Lanskap Landscape Design 3 T

Kursus Teras Elektif Jabatan Yang Ditawarkan / elective Courses offered


Nadia [email protected]/ext : 4528

Sitti Diana [email protected]/ext : 3343

JABATAN UKUR BAHAN / dePartment of Quantity surveyingStaf Akademik / academic staff


Sarjana Muda Sains (Kepujian) Ukur BahanBachelor of science (hons.) Quantity surveyingAbdul Wafi [email protected]/ext : 2602

Ketua Jabatan (Jabatan Ukur Bahan)head of department

(department of Quantity surverying)Prof Madya Sr Dr Afzan Ahmad Zaini




UNIMAS merupakan Universiti Awam (UA) yang pertama di Negeri Sarawak menawarkan program Ijazah Sarjana Muda Ukur Bahan (Kepujian) yang memenuhi keperluan akreditasi Lembaga Juruukur Bahan Malaysia. Program ini selaras dengan kemajuan teknologi seperti Inisiatif Digital Ekonomi Sarawak terutama sekali melalui pembangunan infrastruktur yang memerlukan modal insan dalam bidang pembinaan dan teknikal bagi menaiktaraf pembangunan sosioekonomi negeri sarawak. Program ini juga memenuhi keperluan global selari dengan halatuju pendidikan baru yang diperakukan oleh Lembaga Juruukur Bahan Malaysia dan industri pembinaan dengan penawaran kursus yang bersesuaian bagi pendedahan para pelajar berkaitan dengan pembangunan di dalam dan luar negara.

UNIMAS is the first Public University (UA) in Sarawak offering Bachelor of Quantity Surveying (Honours) programme that meets the accreditation requirements of the Board of Quantity Surveyors Malaysia. This programme is in line with technological advances such as the Sarawak Digital Economy Initiative especially through the development of infrastructure that requires human capital in construction and technical fields to enhance the socio-economic development of Sarawak. The programme also meets global needs in line with the new educational direction approved by the Board of Quantity Surveyors Malaysia and the construction industry through the appropriate courses offered to expose students to developments in local and international construction.


Program ini dibangunkan untuk menghasilkan graduan Ukur Bahan yang kreatif, berkemampuan, berwibawa dan berkaliber tinggi dengan pengetahuan yang mantap dalam sector pembinaan mampan, biodiversiti, pemuliharaan alam sekitar, maklumat, komunikasi dan teknologi kreatif serta memenuhi keperluan pasaran tempatan dan antarabangsa dalam bidang Alam Bina berdasarkan Programme Objective (PEO) seperti berikut:

The programme is designed to produce Quantity Surveying graduates who are creative, capable, competent and high calibre with a sound knowledge in sustainable construction, biodiversity, environmental conservation, information, communication and creative technology. It also designed to meet the needs of local and international market of built-environment as reflected in the Programme Educational Objectives (PEO) as follows:

PEO1 To produce graduates with an essential in-depth technical competency, knowledge and skills to attain advancement in Quantity Surveying profession.

PEO2 To provide graduates with required ICT skills, life-long learning attitudes, leadership and team-building spirit and understanding of biodiversity, environmental conservation and sustainable community transformation consistent with the concept of sustainable development in construction industry

PEO3 To produce graduates who are engaged in professional practice in quantity surveying profession with high ethical and professional responsibilities in solving quantity surveying related problem systematically using appropriate tools and techniques.

PEO4 To produce graduates with a strong interpersonal and communication skills who can work effectively in multidisciplinary environment and multicultural teams in construction industry locally and globally.


3.0 Hasil Pembelajaran Program / Programme outcomes Setelah pelajar-pelajar bergraduat dari program ini, mereka berkeupayaan

menguasai kebolehan-kebolehan berikut :

These objectives (PEOs) would be achieved by attaining several Programme Outcomes (POs) from the learning process as shown below:

PO1 Apply knowledge of quantity surveying theory, professional practice, construction technology, economics and technical competence to solve complex Quantity Surveying problem.

PO2 Apply knowledge of information and communication technology, advanced technology and innovation in quantity surveying activities

PO3 Analyze and solve problems in quantity surveying discipline using systematic approaches to provide valid conclusions.

PO4 Communicate effectively on quantity surveying activities within the same and different disciplines, and with community at large.

PO5 Function effectively as an individual and a member of multidisciplinary setting and multicultural teams.

PO6 Recognize the need for and ability to engage in lifelong learning in the broadest context of technological change.

PO7 Apply and integrate the professional and ethical responsibilities of quantity surveying practice

PO8 Demonstrate knowledge and understand the responsibility of a professional quantity surveyor related to social, cultural, business, global and environmental towards the implementation of sustainable development.

4.0 Konsep Penubuhan Program / Programme Concepts Selaras dengan pertambahan bilangan projek dan pembangunan

infrastruktur di Sarawak disamping prospek yang luas melalui Rancangan Malaysia ke-11 (RMK-11), penglibatan juruukur bahan amat penting untuk menyusun semula pembangunan infrastuktur dengan lebih teratur. Justeru, ia dapat memberi peluang khususnya pembangunan fizikal dan meningkatkan taraf ekonomi masyarakat setempat dengan berteraskan pembangunan Sarawak Corridor of Renewable Energy (SCORE) dan Inisiatif Digital Ekonomi.

Juruukur Bahan adalah merupakan tenaga professional yang bertanggungjawab dalam memastikan kos projek tidak melebihi peruntukan yang ditetapkan oleh majikan. Mereka memberi nasihat di peringkat perancangan tentang kos yang terlibat dalam pembangunan yang dicadangkan. Mereka juga menyediakan kajian untuk menyelidik sama ada rancangan pembangunan itu akan menguntungkan atau merugikan. Juruukur bahan juga bekerjasama dengan kumpulan pereka bentuk bagi menentukan setiap elemen bangunan yang dicadangkan itu berpadanan dengan peruntukan kewangan, di samping menyediakan akaun penamat bagi sesebuah projek binaan.


Terkini, negara mempunyai hampir 2500 juruukur bahan yang berdaftar dengan Lembaga Juruukur Bahan Malaysia (LJBM). Negara memerlukan sejumlah 53,000 juruukur bahan bagi menampung kehendak sebuah negara maju yang berdaya saing seperti Malaysia (LJBM, 2017). Berdasarkan perangkaan ini, peluang pekerjaan dalam profesion ini amat luas bukan sahaja di dalam negara malah juga di luar negara. Peluang-peluang pekerjaan juga banyak terdapat di sektor awam atau swasta.

Antara jabatan yang memerlukan juruukur bahan termasuk di Jabatan Kerja Raya, Perbadanan Kemajuan Ekonomi Negeri, Majlis Tempatan, Perbadanan Pembangunan Bandar (UDA), Lembaga Lebuhraya Malaysia, Jabatan Pengairan dan Saliran dan Institusi Pengajian Tinggi. Sementara di sektor swasta pula, peluang pekerjaan boleh didapati di firma perunding ukur bahan, bank dan institusi kewangan, firma insurans, firma pemaju binaan, firma kontraktor binaan, dan badan-badan korporat.

In line with the increasing number of projects and infrastructure development in Sarawak as well as extensive prospects through Eleventh Malaysia Plan, the involvement of Quantity Surveyors is crucial to restructuring the infrastructure development. Hence, it provides opportunities for physical development and enhancement of the economic standards of the local community based on the development of the Sarawak Corridor of Renewable Energy (SCORE) and the Digital Economy Initiative.

Quantity Surveyor is a profession that is responsible to ensure project costs do not exceed the budget allocation set by the employer. Quantity Surveyors also give advice on financial and cost implications at the planning stage for the proposed development. They also provide research to investigate whether the development plan will be beneficial or detrimental. Quantity surveyors also work with design teams to ensure that each element of the proposed building corresponds to the budget allocation, as well as provide a final account for a construction project.

Currently, there are approximately 2500 Quantity Surveyors registered with the Board of Quantity Surveyors Malaysia (BQSM). The country needs a total of 53,000 Quantity Surveyors to cater to the needs of a developed nation like Malaysia (BQSM, 2017). Based on these figures, employment opportunities in this profession are not only available within the country but also abroad. Employment opportunities are also available in the public or private sectors.

Among the departments that require Quantity Surveyors include the Public Works Department, State Economic Development Corporation, Local Council, Urban Development Corporation (UDA), Malaysian Highway Authority, Department of Irrigation and Drainage and Institutions of Higher Education. In the private sector, there are job opportunities at quantity surveying consultancy firms, banks and financial institutions, insurance companies, construction development, and corporate organizations.


Kod/Code

Kursus/Courses Jam Kredit/Credit hours


Tahun 1/year 1

Semester 1

BEQ1013Pengenalan kepada Pengukuran Pembinaan

Introduction to Construction Measurement

3 T

BEQ1023Teknologi Pembinaan Kerja-Kerja Bangunan

Construction Technology for Building Works

3 T

BEQ1032 Asas Kepada Ekonomi Binaan Principles of Construction Economics 2 T

BEQ1042 Teknologi Digital Pembinaan Digital Technology in Construction 2 T

Semester 2

BEQ1054Pengukuran Pembinaan Kerja-Kerja Senibina I

Construction Measurement of Architectural Works

4 T

BEQ1063Teknologi Pembinaan Kerja-Kerja Struktur

Construction Technology for Structural Works

3 T

BEQ1073 Ekonomi Binaan Juruukur Bahan IConstruction Economics for Quantity Surveyors I

3 T

BEQ1083 Sains Bangunan Building Science 3 T

BEQ1092 Pra Pentadbiran Kontrak Pre-Contract Administration 2 T

Tahun 2/year 2

Semester 1

BEQ2104Pengukuran Pembinaan Kerja-Kerja Struktur I

Construction Measurement of Structural Works I

4 T

BEQ2113Teknologi Binaan Kerja-Kerja Kejuruteraan Sivil

Construction Technology For Civil Engineering Works I

3 T

BEQ2123Pengurusan dan Undang-Undang Binaan

Construction Law and Management 3 T

BEQ2133 Ekonomi Binaan Juruukur Bahan IIConstruction Economics for Quantity Surveyors II

3 T

BEQ2143 Pentadbiran Kontrak I Contract Administration I 3 T

BEQ2152 Anggaran Kos Binaan I Construction Estimating I 2 T

Semester 2

BEQ2164Pengukuran Pembinaan Kerja-Kerja Struktur II

Construction Measurement of Structural Works II

4 T

BEQ2173Teknologi Binaan Kerja-Kerja Kejuruteraan Sivil II

Construction Technology for Civil Engineering Works II

3 T

BEQ2183 Pentadbiran Kontrak II Contract Administration II 3 T

BEQ2193 Pelaburan dan Penilaian Harta Property Investment and Evaluation 3 T

BEQ2203 Perkhidmatan Bangunan Building Services 3 T

BEQ2212 Anggaran Kos Binaan II Construction Estimating II 2 T





Tahun 3/ year 3

Semester 1

BEQ3224 Pengukuran Pembinaan Perkhidmatan bangunan dan Kerja Luar

Construction Measurement of Building Services and External Works

4 T

BEQ3233 Pentadbiran Kontrak III Contract Administration III 3 T

BEQ3243 Pengurusan Projek Pembinaan Construction Project Management 3 T

BEQ3252 Kaedah Penyelidikan dalam Pembinaan

Research Method for Construction 2 T

Semester 2

BEQ32612 Latihan Industri Industrial Training 12 T

Tahun 4/Year 4

Semester 1

BEQ4274 Pengukuran Pembinaan Kerja-Kerja Kejuruteraan Sivil

Construction Measurement of Civil Engineering Works

4 T

BEQ4283 Resolusi Pertikaian dan Undang-Undang Tort

Law of Tort and Dispute Resolution 3 T

BEQ4293 Maklumat Model Bangunan Building Information Modeling 3 T

BEQ4303 Integrasi Multidisiplin Projek Bersepadu dan Simulasi I

Integrated Multidisciplinary Project and Simulation I

3 T

BEQ4312 Projek Tahun Akhir I Final Year Project I 2 T

Semester 2

BEQ4323 Perniagaan Pembinaan Construction Business 3 T

BEQ4333 Projek Tahun Akhir II Final Year Project II**Pre-Requisite to Final Year Project I

3 T

BEQ4343 Integrasi Multidisiplin Projek Bersepadu dan Simulasi II

Integrated Multidisciplinary Project and Simulation II **Pre-Requisite to Integrated Multidisciplinary Project I

3 T

BEQ4353 Kemampanan Pembinaan Construction Sustainability 3 T


Kod/Code Kursus/Course Kredit/Credit

Catatan/Remark

PBI1112 Preparatory English 1 2 Pelajar yang lulus dengan Band Muet 1-2

PBI1122 Preparatory English 2 2 Pelajar yang lulus PBI1112


Catatan/Remark

MPU3122 Tamadun Islam dan Tamadun Asia 2 Wajib diambil oleh semua pelajar

MPU3112 Hubungan Etnik 2 Wajib diambil oleh semua pelajar

MPU3222 Asas Pembudayaan Keusahawanan

2 Wajib diambil oleh semua pelajar

MPU3312 Bahasa Melayu 2 Wajib diambil oleh semua pelajar

MPU3412 Kompetensi ICT 2 Wajib diambil oleh semua pelajar


Catatan/Remark

PBI1102 Academic English 1 2 Pelajar yang lulus Band Muet 3 ATAU pelajar yang lulus PBI1122

PBI1072 English for Professional Communi-cation

2 1. Pelajar yang lulus dengan Band MUET 3 dan ke atas ATAU pelajar yang lulus PBI1122

2. Bagi pelajar dengan Band MUET 4 dan ke atas perlu lulus PBI1082 dan PBI1092

3. Kursus ini tidak ditawarkan kepada pelajar dari program Perubatan.

PBI1092 Academic English 2 2 1. Pelajar yang lulus dengan Band MUET 4 dan ke atas

PBI1082 English for Occuoational Purposes 2 1. Pelajar yang lulus dengan Band MUET 4 dan ke atas.

2. Pelajar dari program Perubat-an yang lulus dengan Band MUET 3 ke atas

KURSUS-KURSUS PENGUKUHAN(R) /REMEDIAL COURSES (R)

KURSUS-KURSUS MATAPELAJARAN UMUM (MPU)

KURSUS-KURSUS PEMBANGUNAN GENERIK (G) / generiC Courses (g)


Semester 1

Semester 2

Bil. Kod/Code Kursus/Course Jam Kredit/Credit hours

1. PPD1041 Kemahiran Insaniah dan Asas Keusahawanan/Softskills and Basic Volunteerism

1

2. PPD1032 Kokurikulum Berkredit/Credit Co-curricular 2

3. PPA1041 Latihan Ketenteraan (Darat) 1/Military Training 1 1




7. PPB1011 Latihan Ketenteraan (Udara) 1/Airforce Training 1 1



10. PPJ1041 Latihan Pertahanan Awam 1/Civil Defence Training 1 1


12. PPJ2071 Latihan Pertahana Awam 4/Civil Defence Training 4 1


14. PPP1041 Latihan Kepolisan 1/Police Training 1 1




1. PPD1032 Kokurikulum Berkredit/Credit Co-curricular 2











12. PPP2071 Latihan Pertahana Awam 4/Civil Defence Training 4 1


PUSAT PEMBANGUNAN PELAJAR /CENTRE FOR STUDENT DEVELOPMENT


KURSUS ELEKTIF UNIVERSITI / university eleCtive Courses

Setiap pelajar perlu mengambil Kursus Elektif Universiti sebanyak 9 jam kredit sepanjang pengajian sebagai syarat bergraduat. Kursus-kursus ini boleh diambil dari fakulti lain atau program lain di fakulti yang sama. Senarai Kursus Elektif Universiti yang ditawarkan mengikut fakulti adalah seperti berikut:

All students are required to enroll for 9 credit hours of University Elective Courses within their study duration. They can be courses offered from other faculties or from the same faculty. The list of University Elective Courses are as follow:

FAKULTI KEJURUTERAAN / faCulty of engineeringSemester 1

Semester 2


1. KNU 1013 Pengenalan Kepada Teknologi Hijau(Introduction to Green Technology)

3

2. KNU 1033 Tenaga, Persekitaran dan Masyarakat(Energy, Environment and Society)

3

3. KNU1063 Asas Kepada Bangunan Hijau (Fundamentals to Green Building)

3

4. KNU1073 Pengenalan Kepada Sistem Solar Photovoltaic Introduction to Solar Photovoltaic System

3


1. KNU1023 Jurutera dalam masyarakat(Engineers in Society)

3

2. KNU1053 Pengurusan Keselamatan di Tempat Kerja(Safety Management in Workplace)

3

3. KNU1083 Pengurusan Perniagaan untuk Industri Pembinaan (Business Management for Construction Industry)

3

4. KNU1093 Sumber Air dalam Pembangunan Komuniti(Water Resources in Community Development)

3

5. KNU1103 Pengenalan Kepada Sistem Kuasa Hidro(Introduction to Hydro Power System)

3


FAKULTI EKONOMI DAN PERNIAGAAN /faCulty of eConomiCs and Business

Semester 1

Semester 2


1. EBU 1023 Pengurusan Perniagaan Kecil / Small Business Management 3

2. EBU 1033 Persekitaran Ekonomi Malaysia /Malaysian Economic Environment

3

3. EBU 1053 Pengurusan Perniagaan Atas Talian Online Business Management

3

4. EBU 2043 Pengenalan Kepada Harta Intelek /Introduction to Intellectual Property

3


1. EBU 1013 Pengurusan Perniagaan Kecil / Small Business Management 3

2. EBU 1033 Persekitaran Ekonomi Malaysia /Malaysian Economic Environment

3

3. EBU1053 Pengurusan Perniagaan Atas Talian /Online Business Management

3

4. EBU 2043 Pengenalan Kepada Harta Intelek /Introduction to Intellectual Property

3


Semester 2


1. MDU 1013 Asas Pertolongan CemasBasic First Aids

3

2. MDU 1023 Pengenalan Kepada Genetik PerubatanIntroduction to Medical Genetics

3

3. MDU 1053 Pengenalan Kepada Parasitologi PerubatanIntroduction to Medical Parasitology

3

4. MDU 1073 Pengenalan kepada Fisiologi BioperubatanIntroduction to Biomedical Physiology

3

5. MDU 1083 Pengenalan kepada Tingkahlaku dan KesihatanIntroduction to Health and Behaviour

3

6. MDU 1103 Manusia dan NutrisiHuman dan Nutrition

3

7. MDU 1113 Pengenalan kepada Fiqh PerubatanIntroduction to Medical Fiqh

3

FAKULTI PERUBATAN DAN SAINS KESIHATAN /FACULTY OF MEDICINE AND HEALTH SCIENCES

Semester 1


1. MDU 1033 Gaya Hidup SihatHealthy Lifestyle

3

2. MDU 1043 Pengenalan Kepada Entomologi PerubatanIntroduction to Medical Entomology

3

3. MDU 1063 Masalah Pembelajaran Teori dan PraktisLearning Disabilities

3

4. MDU 1073 Pengenalan kepada Fisiologi BioperubatanIntroduction to Biomedical Physiology

3


Semester 1

Semester 2


1. TMU 1013 Pengenalan Kepada Teknologi KomputerIntroduction to Computer Technologies

3

2. TMU 1023 Etika Dalam Teknologi Maklumat / Ethics in Information Technology

3

3. TMU 1043 Teknologi MultimediaMultimedia Technology

3

4. TMU 1053 Matematik Dalam Kehidupan SeharianMathematics in Daily Life

3


1. TMU 1013 Pengenalan Kepada Teknologi KomputerIntroduction to Computer Technologies

3

2. TMU 1023 Etika Dalam Teknologi Maklumat / Ethics in Information Technology

3

3. TMU 1043 Teknologi MultimediaMultimedia Technology

3

4. TMU 1053 Matematik Dalam Kehidupan SeharianMathematics in Daily Life

3

FAKULTI SAINS KOMPUTER DAN TEKNOLOGI MAKLUMAT /faCulty of ComPuter sCienCe and information teChnology

Semester 1

Semester 2


1. KMU 1013 Hubungan Menolong / Helping Relationships 3

2. KMU 1053 Interaksi Manusia Komputer : Teori dan KonsepHuman Computer Interaction : Theories and Concepts

3

3. KMU 1063 Pengenalan Kesihatan Mental / Introduction to Mental Health 3


1. KMU 1013 Hubungan Menolong / Helping Relationships 3

2. KMU 1023 Pengenalan Pembangunan Sumber Manusia Introduction to Human Resource Development

3

FAKULTI SAINS KOGNITIF DAN PEMBANGUNAN MANUSIA /faCulty of Cognitive sCienCes and human develoPment


Semester 1

Semester 2


1. GKU 1013 Drama dan Teater Moden Melayu MalaysiaModern Malay Drama and Theatre of Malaysia

3

2. GKU 1033 Fotografi Digital Dan Imejan Sosial Media Digital Photography and Social Media Imaging

3

3. GKU 1043 Sejarah Sinema Malaysia / History of Malaysian Cinema 3


1. GKU 1033 Fotografi Digital dan Imejan Sosial Media / Digital Photography and Social Media Imaging

3

2. GKU 1053 Sejarah Drama Dan Teater / History of Drama and Theatre 3

3. GKU 1063 Pengenalan Kepada Asas Muzik / Introduction to Basic Music

3

4. GKU 1073 Pengenalan Sejarah Seni Reka / Introduction to Design History

3

FAKULTI SENI GUNAAN DAN KREATIF /faCulty of aPPlied and Creative arts

Semester 1

Semester 2


1. SSU 1013 Asas Sains Sosial / Basic of Social Science 3

2. SSU 1023 Asas Antropologi dan Sosiologi /

Basics of Anthropology dan Sociology3

3. SSU 1033 Pengantar PsikologiIntroduction to Psychology

3

4. SSU 1043 Pengantar Komunikasi / Introduction to Communication 3


1. SSU 1013 Asas Sains Sosial / Basic of Social Science 3

2. SSU 1023 Asas Antropologi dan Sosiologi /

Basics of Anthropology dan Sociology3

3. SSU 1033 Pengantar PsikologiIntroduction to Psychology

3

4. SSU 1043 Pengantar Komunikasi / Introduction to Communication 3

FAKULTI SAINS SOSIAL/faCulty of soCial sCienCe


Semester 1

Semester 2


1. STU 1013 Pengantar Bioteknologi / Introduction to Biotechnology 3

2. STU 1023 Fotografi Hidupan Liar / Wildlife Photography 3

3. STU 1033 Sains Akuatik dan Kehidupan Harian /Aquatic Science and Daily Life

3

4. STU 1043 Pengenalan Kepada Fisiologi Tumbuhan / Introduction to Plant Physiology

3

5. STU 2063 Industri Eko-pelancongan di Malaysia / Ecotourism Industry in Malaysia

3

6. STU 2073 Pengurusan Sumber Asli / Natural Resource Manangements 3

7. STU 2083 Ekologi Penyakit Berjangkit / Infectious Diseases Ecology 3


1. STU 1013 Pengantar Bioteknologi / Introduction to Biotechnology 3

2. STU 1023 Fotografi Hidupan Liar / Wildlife Photography 3

3. STU 1033 Sains Akuatik dan Kehidupan Harian /Aquatic Science and Daily Life

3

4. STU 1043 Pengenalan Kepada Fisiologi Tumbuhan / Introduction to Plant Physiology

3

5. STU 2063 Industri Eko-pelancongan di Malaysia / Ecotourism Industry in Malaysia

3

6. STU 2073 Pengurusan Sumber Asli / Natural Resource Manangements 3

7. STU 2083 Ekologi Penyakit Berjangkit / Infectious Diseases Ecology 3

FAKULTI SAINS DAN TEKNOLOGI SUMBER /faCulty of resourCe sCienCe and teChnology


Semester 2


1. PBA 0033 Bahasa Arab Peringkat 1/Arabic Language Level 1 3



4. PBJ 0033 Bahasa Jepun Peringkat 1/Japanese Language Level 1 3



7. PBC 0033 Bahasa Mandarin Peringkat 1/Mandarin Language level 1 3


9. PBC 0053 Bahasa Mandarin Peringkat 3/Mandarin Language Level 3 3

10. PBP 0033 Bahasa Perancis Peringkat 1/French Language Level 1 3



13. PBU 0033 Bahasa Iban untuk Komunikasi/Iban Language for Communication 3

14. PBU 1013 Bahasa Korea/Korean Language 3

FAKULTI BAHASA DAN KOMUNIKASI / FACULTY OF LANGUAGE AND COMMUNICATION

Semester 1










9. PBC 0053 Bahasa Mandarin Peringkat 3/Mandarin Language Level 3 3




13. PBU 0033 Bahasa Iban untuk Komunikasi/Iban Language for Communication 3


Gred ILP Kursus yang ditawarkan Sem 1 & Sem 2 Sesi 2018/2019

Gred A dan A- a) PBI 1092 Academic English II b) PBI 1082 English for Occupational Purposes

Gred B+ a) PBI 1102 Academic English Ib) PBI 1072 English for Professional Communication

Gred B, B-, C+ dan C Pelajar Perlu Mengulang Program Intensif Bahasa.

Kursus Syarat

MPU3142 Bahasa Melayu Komunikasi 2

a) Ditawarkan pada setiap semester kepada pelajar antarabangsa yang diberi tawaran penuh semasa.

b) Kursus ini wajib sebagai syarat untuk bergraduat.

Kursus Syarat

MPU3322Bahasa Melayu Komunikasi Lanjutan

a) Ditawarkan kepada semua pelajar antarabangsa prasiswazah.b) Kursus ini bagi menggantikan TITAS atau Hubungan Etnik.c) MPU3142 adalah pra-syarat bagi kursus ini (sekiranya mahu mengambil

MPU3322).

Kursus Syarat

MPU3172Apresiasi BudayaMasyarakat Malaysia

a) Ditawarkan kepada semua pelajar antarabangsa prasiswazah.b) Kursus ini bagi menggantikan TITAS atau Hubungan Etnik.

Kursus-kursus Generik Bahasa Inggeris yang ditawarkan untuk Pelajar Antarabangsa di UNIMAS bagi Sesi Ambilan 2018/2019

Kursus-kursus Generik Bahasa Inggeris yang ditawarkan untuk Pelajar Antarabangsa yang lulus intensive language Programme (ilP) bagi Sesi Ambilan 2018/2019

Kursus-kursus Generik Bahasa Malaysia yang ditawarkan untuk Pelajar Antarabangsa di UNIMAS bagi Sesi Ambilan 2018/2019

Kelulusan IELTS, CEFR dan setaraf Kursus Bahasa Inggeris Peringkat PrasiswazahIELTS CEFR

Band 5 dan ke bawah A1Pelajar perlu mengulang program Intensif Bahasa.

A2

B1

Band 5.5 - 6.5B2

PBI1102 Academic English 1PBI1072 English for ProfessionalCommunication

Band 7.0 – 8.0 C1 PBI1092 Academic English 2PBI1082 English for Occupational PurposesBand 9.0 C2


SENARAI STAF SOKONGAN PENTADBIRAN & SOKONGAN TEKNIKAL /admin & teChniCal suPPorting staff

Penolong Pegawai Tadbir Assistant Administrative OfficerPuan Nuraishah Abdul [email protected]/ext : 3342

Setiausaha Pejabat DekanDean’s Office SecretaryPuan Shamsiah [email protected]/ext : 3329

Staff Sokongan Akademik / academic support staffs

Setiausaha Pejabat / Office Secretaries

Setiausaha Pejabat Timbalan Dekan (Prasiswazah)(Hal Ehwal Pelajar dan Alumni) Deputy Dean’s Office SecretaryPuan Siti Maria [email protected] samb/ext : 3328

Setiausaha Pejabat Timbalan Dekan (Penyelidikan dan Siswazah)(Keterlibatan Industri, Komuniti dan Pengkomersilan)Deputy Dean’s Office SecretaryCik Hajjah Fatimah Haji [email protected] samb/ext : 3330

Kejuruteraan Sivil / Civil engineeringPuan Rokilah Bohari [email protected]/ext : 3347

Kejuruteraan Elektrikal & Elektronik / department ofelectrical & electronicengineeringCik Lea Ak [email protected]/ext : 3344

Kejuruteraan Elektrikal &Elektronik / electrical & electronicengineeringPuan Safaraliwati Ghazali [email protected]/ext : 3346

Jabatan Seni Bina / Jabatan Ukur Bahandepartment of architecture /department of QuantitysurveyingPuan Roslawati Hj [email protected]/ext : 3327

Kejuruteraan Mekanikal dan Pembuatan /mechanical & manufacturing engineeringPuan Dayang Norilila Awang [email protected] samb/ext : 3346

Kejuruteraan Kimia dan Sustainabiliti Tenaga /Chemical Engineering and Energy SustainabilityPuan Maryani [email protected]/ext : 3348


Penolong Akauntanassistant accountantPuan Hamizah [email protected] samb/ext : 3336

Staff Pentabiran dan Kewangan / administrative and finance staffs

Staff Sokongan IT dan Teknikal / it and techincal support staffs

Ketua Pembantu Tadbir(Perkeranian & Operasi) Chief administrative assistantEncik Azaha [email protected] samb/ext : 3341

Penolong Pegawai Teknologi Maklumat Kanansenior assistant informationTechnology OfficerPuan Rose Sima [email protected] samb/ext : 3404

Pembantu Makmal Kanan (Computer) /senior lab assistant(Computer)Encik Mohd Ismail Hairul Abdul Latif [email protected]/ext : 3250

Penolong Pegawai Teknologi Maklumatassistant informationTechnology OfficerEncik Denny [email protected]/ext : 3250

Pembantu Operasi /operation assistantEncik Ashor [email protected]/ext : 3343

Pegawai Khidmat Pelanggan /Customer Relation OfficerPuan Angela Robert [email protected]/ext : 3343

Pentadbiran / adminEncik Aswandi Rosli [email protected]/ext : 3341

Kewangan / finance Puan Dahlia [email protected]/ext : 3345

Pentadbiran / adminEncik Erwandi Bujang Senawi [email protected]/ext : 3342


JABATAN KEJURUTERAAN SIVIL /dePartment of Civil engineering

Hj. Affandi Hj. [email protected]/ext : 3412 (ofis) / 3413

Encik Rozaini [email protected]/ext : 3419

Encik Saiful [email protected]/ext : 3441

Encik Nur Adha Bin Abdul [email protected]/ext : 3438

Encik Mohd Sapian Mohd [email protected]/ext : 3452

Puan Nur Shafini [email protected]/ext : 3448 / 3411

Encik Mohammad Ar-Rasyidin Bin [email protected]/ext : 3441

Encik Mohd Zaidi [email protected]/ext : 3441

Penolong Jurutera / assistant engineer

Ketua Penolong Jurutera / Chief assistant engineer


JABATAN KEJURUTERAAN ELEKTRIKAL DAN ELEKTRONIK /dePartment of eleCtriCal and eleCtroniC engineering

Encik Wan Mohd. HamizahWan [email protected]/ext : 3386

Encik Nawawi [email protected]/ext : 3374

Encik Awgku Mohd AzmirulAwgku [email protected]/ext : 3383

Puan Dayang RohhayatiAbang [email protected]/ext : 3380 /3399

Encik Johari Abdul [email protected] samb/ext : 3362

Encik Yusmizan [email protected] samb/ext : 3323

Encik Mahathir [email protected] samb/ext : 3352

Encik Iskendasah [email protected]/ext : 3402

Encik Lawrence [email protected]/ext : 3387


Cik Zuraidah [email protected]/ext : 3399/3380

Encik Azizan [email protected]/ext : 3391

Encik Abg Mohd FirdausAbg Abd [email protected]/ext : 3376

Encik Wan Mohd HaekalWan [email protected]/ext : 3367

Encik Nasri [email protected]/ext : 3362

Penolong Jurutera Kanan / senior assistant engineer


JABATAN KEJURUTERAAN MEKANIKAL DAN PEMBUATAN /dePartment of meChaniCal and manufaCturing engineering

Encik Zaidi [email protected]/ext : 3217 / 3219

Encik Ireman [email protected]/ext : 3219 / 3201 (Makmal CNC)

Encik Rhyier Juen @ Mohd Rhyier Juen [email protected] samb/ext : 3253

Puan Hasmiza [email protected] samb/ext : 3214

Encik Sabariman [email protected]/ext : 3219

Puan Siti [email protected]/ext : 3214

Encik Mohd FairudiMohd [email protected]/ext : 3219


Penolong Jurutera Kanan / senior assistant engineer

Encik Azaman [email protected]/ext : 3219


JABATAN KEJURUTERAAN KIMIA DAN SUSTAINABILITI TENAGA /dePartment of ChemiCal engineering and energy sustainaBility

JABATAN SENIBINA / dePartment of arChiteCture

JABATAN UKUR BAHAN / dePartment of Quantity surveying

Cik Norzilawatil [email protected]/ext : 3458

Encik Raja Mohd [email protected]/ext : 3456

Pegawai Sains / Science Officer

Encik Mohd Zulfika Hazielim [email protected]/ext : 3473

Penolong Pegawai Sains / assistant Science Officer

Encik Zulkifli [email protected]/ext : 3471

Encik Mohd Hafiz [email protected] samb/ext : 3466/3467

Encik Kamri [email protected] samb/ext : 3466/3467

Cik Dayang Fadhilatul Aishah Abg Abdul Hamid [email protected]/ext : 3476

Encik Mohd Amirul [email protected] samb/ext : 3466/3467

Encik Airul Azhar [email protected] samb/ext : 3466/3467

Ketua Penolong Jurutera / Chief assistant engineer



Penolong Ukur Bahan / Assistant Quantity Surveying

Encik Mohamad Tajuddin [email protected]/ext : 3387

Cik Zaharaa’ [email protected]/ext : 3343


KALENDAR AKADEMIK PENGAJIAN IJAZAH SARJANA MUDA /(aCademiC Calendar for undergraduate studies)

UNIVERSITI MALAYSIA SARAWAKSESI 2018/2019

(2018/2019)

Aktiviti /activity SEMESTER 1

Tarikh / date Tempoh / duration

Pendaftaran Pelajar Baharu(New Student Registration)Online Registration

13 Ogos 2018 – 2 Sept 2018(13 Aug 2018 – 2 Sept 2018)

21 hari(21 days)

Pendaftaran Kolej KediamanPelajar Baharu(Residential College Registration)

3 Sept 2018– 4 Sept 2018(3 Sept 2018 – 4 Sept 2018)

2 hari(2 days)

Minggu Aluan Pelajar(Student’s Orientation Week)

5 Sept 2018 – 9 Sept 2018(5 Sept 2018 – 9 Sept 2018)

5 hari(5 days)

Pendaftaran Pelajar Semasa (Returning Student’s Registration)Online Registration


1 minggu(1 Week)

Pendaftaran Kolej Kediaman Pelajar Semasa (Returning Student’s College Registration)


2 hari(2 days)

Perkuliahan(Lectures)

10 Sept 2018 – 2 Nov 2018(10 Sept 2018 – 2 Nov 2018)

8 minggu(8 Week)

Cuti Pertengahan Semester

(Mid-Semester Break)3 Nov 2018 – 11 Nov 2018(3 Nov 2018 – 11 Nov 2018)

9 hari(9 days)


12 Nov 2018 – 21 Dis 2018(12 Nov 2018 – 21 Dec 2018)

6 minggu(6 weeks)

Cuti Ulangkaji/Cuti KhasSemester 1(Revision Week)

22 Dis 2018 – 30 Dis 2018(22 Dec 2018 – 30 Dec 2018)

9 hari(9 days)

Minggu Peperiksaan(Examination Week)

31 Dis 2018 – 11 Jan 2019(31 Dec 2018 – 11 Jan 2019)

2 minggu(2 weeks)

Cuti Semester 1(Semester Break)

12 Jan 2019 – 27 Jan 2019(12 Jan 2019 – 27 Jan 2019)

2 minggu(2 weeks)


Aktiviti /activity SEMESTER 2


Pendaftaran Pelajar Semasa (Returning Student’sRegistration/Online Semester Registration)

19 Jan 2019 – 27 Jan 2019(19 Jan 2019 – 27 Jan 2019)

1 minggu(1 week)

Pendaftaran Kolej Kediaman Pelajar Semasa(Returning Student’s Residential College Registration)

26 Jan 2019 – 27 Jan 2019(26 Jan 2019 – 27 Jan 2019)

2 hari(2 days)


28 Jan 2019 – 22 Mac 2019(28 Jan 2019 – 22 March 2019)

8 minggu(8 weeks)

Cuti Pertengahan Semester 2(Mid-Semester Break)

23 Mac 2019 – 31 Mac 2019(23 March 2019 – 31 March 2019)

9 hari(9 days)


1 Apr 2019 – 10 Mei 2019(1 Apr 2019 – 10 May 2019)

6 minggu(6 weeks)

Minggu Peperiksaan(Examination Weeks)

13 Mei 2019 – 31 Mei 2019(13 May 2019 – 31 May 2019)

3 minggu(3 weeks)

Cuti Panjang(Long Break)

1 Jun 2019 – 1 Sept 2019(1 June 2019 – 1 Sept 2019)

13 minggu(13 weeks)

Aktiviti /activity ANTARSESI


Pendaftaran Pelajar Semasa(Returning Student’s Registration)Online Semester Registration

27 Mei 2019 – 31 Mei 2019(27 Mei 2019 – 31 Mei 2019)

5 hari(5 days)


17 Jun 2019 – 9 Ogos 2019(17 June 2019 – 9 Aug 2019)

8 minggu(8 weeks)


1. 22 Ogos 2018 (22 August 2018) Hari Raya Aidiladha

2. 31 Ogos 2018 (31 August 2018) Hari Kemerdekaan (National Day)

3. 9 September 2018 (9 September 2018) Hari Keputeraan Yang Di Pertuan Agong

Hari Jadi TYT (Sarawak Governor’s Birthday)

4. 11 September 2018 (11 September

2018)

Awal Muharram (Maal Hijrah)

5. 16 September 2018 (16 September

2018)

Hari Malaysia (Malaysia Day)

6. 6 November 2018 (6 November 2018) Hari Deepavali (Semenanjung Malaysia sahaja)

7. 20 November 2018 (20 November

2018)

Maulidur Rasul (Prophet Muhammad’s Birthday)

8. 25 Disember 2018 (25 December 2018) Hari Krismas (Christmas)

9. 1 Januari 2019 (1 January 2019) Tahun Baharu 2019 (New Year)

10. 5 & 6 Februari 2019

(5 & 6 February 2019)

Tahun Baru Cina (Chinese New Year)

11. 19 April 2019 (19 April 2019) Good Friday

12. 1 Mei 2019 (1 May 2019) Cuti Hari Pekerja (Labour Day)

13. 19 & 20 Mei 2019 (19 & 20 May 2019) Hari Wesak (Wesak Day)

14. 1 & 2 Jun 2019 (1 & 2 June 2019) Hari Gawai (Gawai Day)

15. 5 & 6 Jun 2019 (5 & 6 June 2019) Hari Raya Aidilfitri


NOTA


NOTA


NOTA


NOTA

Date post:	01-Aug-2019
Category:	Documents
Upload:	phamkhue
View:	246 times
Download:	0 times

Visi UNIMAS UNIMAS Untuk menjadi sebuah universiti contoh serta diiktiraf di peringkat antarabangsa...

Documents