Date post: | 31-Dec-2015 |
Category: |
Documents |
Upload: | jonah-clements |
View: | 18 times |
Download: | 1 times |
P&B ENGINEERING
Utilising Feedervision as the base model Present relay for Venezuela job uses
existing hardware from established Vision 2 hardware platform
Extended front panel and switch/led addition to achieve ‘look’ of a larger device
Software modified and re-written to create recloser functionality
P&B ENGINEERING
VISION r design driven by specific project requirements.
Intention is to create a generic recloser relay to meet FKI requirements
Make use of the existing cost advantage
Absorb the functionality of high specification recloser applications
Minimise wiring, programming, reduces peripheral equipment and commissioning time
P&B ENGINEERING
New VISION r to be mechanically repackaged
PCB layouts and circuitry to be consolidated using presently used BoM
No deviation from existing and proven software & hardware knowledge base
Better use of space within the relay New hardware arrangement to be
utilised as the de facto 200 series drawout relay
New platform also for retrofit products & repackaged FV2 and AFV2 relays
P&B ENGINEERING
New format will not negate existing look
Maintained cost advantage by using existing BoM
Structurally superior Inclusion of high current trip and
close relays Connectors can be to FKI choice Ease of manufacture Finished product