www.vmeca.com
ISO 9001 CERTIFIED
VMECA - INNOVATEDNEW PRODUCTS
Specifications subject to change without notice.2
VACUUM CARTRIDGE
www.vmeca.com
VMECA Vacuum Cartridge
VACUUMCOMPRESSEDAIR
1
2
Vacuum is created with an air-jet system when Compressed air (3~6bar / 43.5~87 psi)passes at high speed through the pump nozzles
VMECA VACUUM CARTRIDGE IS ..
High vacuum flow rate (3X higher) and an extremely quick response time (about 1.5 X greater)compared to typical and conventional air-ejectors.
Maintains vacuum despite fluctuations and drops in air pressure (operating using compressedair at a pressure of 3~6 bar / 43.5~87 psi)
Located at or near the point of use thus reducing system volume, increasing speed andreducing cycle time.
Air at a pressure of 3~6 bar / 43.5~87 psi
APPLICATIONS
VMECA Vacuum Cartridge
KR PAT No.629994PCT No. PCT/KR 2006/005638
The vacuum pump system is created by installing one or moreVMECA Vacuum Cartridge into appropriate sized holes made incustomer supplied material. The customer determines the de-sign, size and style of the system.
VMECA Vacuum Cartridge
VMECA Vacuum Cartridge pump
3www.vmeca.com Specifications subject to change without notice.
VMECA Vacuum Cartridge
VMECA Micro Cartridge
VC102 : An extremely compact, patented design, multi-stage vacuum ejectorSmall size and high vacuum level (-85 kPa) at very low (1.7 bar) inlet air pressure.
VC202 : Small size, Suitable for application that require high operational reliability despite fluctuating or lowcompressed-air pressure.
VMECA Mini Cartridge
VC203 : Extremely large vacuum flow. Suitable for applications that require high operational reliabilitydespite fluctuating or low compressed-air pressure.
VMECA Midi Cartridge
VCL303 : Large vacuum flow. Suitable for applications that require quick response time.VC303 : Extremely large vacuum flow. Suitable for applications that require high operational reliability despite
fluctuating or low compressed-air pressure.
VCL302 : Small size. Suitable for non-sealed system.VC302 : Small size. Suitable for applications that require high operational reliability despite fluctuating or low
compressed-air pressure.
2 Stage Nozzle Cartridge
2 Stage Nozzle Cartridge
3 Stage Nozzle Cartridge
3 Stage Nozzle Cartridge
2 Stage Nozzle Cartridge
Specifications subject to change without notice.4
VACUUM TURTLE PUMP
www.vmeca.com
Based on VMECA Vacuum CartridgeTURTLE-PUMP
: - 92 kPa (- 27.1 inHg) : 341 Nl/min (12.04 scfm)682 Nl/min (24.08 scfm)1364 Nl/min (48.17 scfm)
: 3 ~ 6 bar (43.5~87 psi)max 7 bar (101.5 psi)
: 97 ~ 152 Nl/min (3.4 ~ 5.4 scfm)194 ~ 304 Nl/min (6.8 ~ 10.7 scfm)194 ~ 608 Nl/min (6.8 ~ 21.4 scfm)
: Dry compressed air: - 20°C to +80°C ( - 4°F to + 176°F ): 50 ~ 65 dBA
Series VTC 3031 3032 3131~4
Max. vacuum levelMax. flow rate
Supply air pressure
Air consumption
Supply air typeWorking temp.Noise level
: - 75 kPa (- 22.1 inHg) : 362 Nl/min (12.8 scfm)724 Nl/min (25.6 scfm)1448 Nl/min (51.13 scfm)
: 4 ~ 6 bar (58~87 psi), max 7 bar (101.5 psi)
: 70 ~ 104 Nl/min (2.5 ~ 3.7 scfm)140 ~ 208 Nl/min (4.9 ~ 7.3 scfm)140 ~ 416 Nl/min (4.9 ~ 14.7 scfm)
: Dry compressed air: - 20°C to + 80°C (- 4°F to + 176°F): 50 ~ 65 dBA
Series VTCL 3031 3032 3131~4
Main advantages
Applications
Patented design.
High operational reliability despite fluctuating or low compressed-air pressure.
Integrated high dirt holding capacity pleated filter.
Automatic vacuum filter cleaning system.
Compact size and light weight.
VMECA Twofold SilencerPT assures low noise levels and adjustable exhaust direction.
Optional Air-Saving(AS) kit available to minimize energy consumption.
Optional factory installed Air control / Vacuum release valves and Vacuum switch available.
Easily mountable and interchangeable vacuum cartridge.
Max. vacuum levelMax. flow rate
Supply air pressure
Air consumption
Supply air typeWorking temp.Noise level
High vacuum level (-92 kPa / -27.1 inHg) at low compressed air pressure (3~6 bar / 43.5~87 psi)High vacuum flow rate to compensate for fluctuating or low compressed air pressure.Suitable for sealed system applications such as lifting metal sheets or glass plate.
Extra high vacuum flow rate and suitable for non-sealed system applications.Vacuum level of -75 kPa (-22.1 inHg) at a compressed air pressure of 6 bar.
Series VTC
Series VTCL
< Packaging industry > < Press stamping in Automobile industry >
R
R
R
R
R
R
5
VACUUM TURTLE PUMP
www.vmeca.com Specifications subject to change without notice.
Structure and Main advantage of Mega Turtle Pump
BodyDurable engineering plastic material
Corrosion resistant
Light weight
Two vacuum ports : 3/4 and 1
VMECA Vacumm filterPrevents dust coming into the pump
Pleated media for high dirt holding capacity
Moisture, oil resistant
Washable
VMECA Vacumm releasecontrol valve
Quick vacuum release
Automatic filter cleaning system
VMECA Patented Vacuum Cartridge SystemMultiple Vacuum cartridge available up to 4 pcsHigh operational reliability despite fluctuating or low compressed air pressure
Air-Saving (AS) kit available to minimize energyconsumption (about 20times less)
Easily mountable and interchangeable vacuum cartridge
VMECA Air control valveSingle or Double solenoid valve
VMECA Vacuum gauge or sensorIndicates vacuum level
Digital output signal when set vacuum level is achieved
VMECA Free-flow silencerAssures low noise level
Free air flow design to minimize vacuum lossdue to back flow
No dust collection
Specifications subject to change without notice.6
VACUUM TURTLE PUMP
www.vmeca.com
High operational reliability despite fluctuating or low compressed airpressure (Vacuum level +2%)
R
Typical installation (Old System)
VMECA Improved SystemVTC3031.. Quick evacuation timeby minimizing vacuum area withall-in-one system
R
RTypical installation (Old system) VMECA Improved system(New solution with Turtle Pump)
Vac
uu
m F
low
& L
evel
s
Vac
uu
m F
low
& L
evel
s
Running Time Running Time (Month)(Month)
Typical installation (Old System)VMECA Improved System
Drop vacuum flow and levels due to easily be blocked the filter surface by dust according as the running time.
Required periodic filter cleaning.
About 3 times faster !!
Vacuum function at running time(Vacuum flow and levels)
Vacuum function at running time(Vacuum flow and levels)
Comparison of Vacuum Efficiency
Comparison of Evacuation time at different Vacuum levels
Comparison of Vacuum level at different feed pressure
RVMECA Turtle pump with built-in filter automatic cleaning system eliminates drop vacuum flow and vacuum levels
Constant vacuum flow & vacuum level
+ + + + +
7
VACUUM TURTLE PUMP
www.vmeca.com Specifications subject to change without notice.
Typical installation (Old system) RVMECA Improved system(New solution with Turtle Pump)
Effective cost saving with VMECA improved system
If each items goes through under the process same as below?
Select model Quotation PO Store in Q.C Installation Payment(Technical dept) (Purchase dept.) (Inventory) (QC dept.) (Account)(assembly dept.)
High installation andmaintenance Costs !!
Very LOW installation andmaintenance Costs !!
Vacuum switchVacuum pipe lineSuction cup
Vacuum pumpAir control valveVacuum release control valveVacuum filter
R
Specifications subject to change without notice.8
VACUUM PUMP
www.vmeca.com8
Based on VMECA Vacuum CartridgeV-PUMP
Series VSMax. vacuum level
Max. flow rate
Supply air pressure
Air consumption
Supply air type
Working temp.
Noise level
: - 92 kPa (- 27.1 inHg)
: 341 Nl/min (12.04 scfm)
: 3 ~ 6 bar (43.5 ~ 87 psi),
max 7 bar (101.5 psi)
: 97 ~ 152 Nl/min (3.4 ~ 5.4 scfm)
: Dry compressed air
: - 20°C to + 80°C (- 4°F to + 176°F): 50 ~ 60 dBA
+ + + + +
6
4
2
1
5
8
1 2 3 4 5 6 + 8
7
3
: - 75kPa (- 22.1 inHg)
: 362 Nl/min (12.8 scfm)
: 4 ~ 6 bar (58 ~ 87 psi),
max 7 bar (101.5 psi)
: 70 ~ 104 Nl/min (2.5 ~ 3.7 scfm)
: Dry compressed air
: - 20°C to + 80°C (- 4°F to + 176°F): 50 ~ 60 dBA
Max. vacuum level
Max. flow rate
Supply air pressure
Air consumption
Supply air type
Working temp.
Noise level
Series VLS
Air control valve
Vacuum pump
Digital switch
Vacuum pipe line
Vacuum release control valve
Release flow ADJ. valve
Vacuum filter
Vacuum manifold
High vacuum level (-92 kPa / -27.1 inHg) at low compressed air pressure (3~6 bar / 43.5~87 psi)High vacuum flow rate to compensate for fluctuating or low compressed air pressure.Suitable for sealed system applications such as lifting metal sheets or glass plate.
Series VS
Series VLS
Located at or near the point of use thus reducing system volume, increase and reducing cycle time.
High operational reliability despite fluctuating.
Quick response time.
Easy to distribute Vacuum. (Multiple connection alternatives up to 8 ports.)
Optional Air-Saving (AS) kit available to minimize energy consumption.
Optional factory installed air control/vacuum release valve and vacuum switch available.
Easily mountable and interchangeable vacuum cartridge.
VMECA Twofold Silencer assures low noise levels and adjustable exhaust direction.
Extra high vacuum flow rate and suitable for non-sealed system applications.Vacuum level of -75 kPa (-22.1 inHg) at a compressed air pressure of 6 bar.
Typical installation (Old system)
VMECA Improved system (New solution with Turtle Pump)
Main advantages
Applications
7
9
VACUUM PUMP
www.vmeca.com Specifications subject to change without notice. 9
Max. vacuum level
Max. flow rate
Supply air pressure
Air consumption
Supply air type
Working temp.
Noise level
: - 92 kPa (- 27.1 inHg)
: 341 Nl/min (12.04 scfm)
: 3 ~ 6 bar (43.5 ~ 87 psi),
max 7 bar (101.5 psi)
: 97 ~ 152 Nl/min (3.4 ~ 5.4 scfm)
: Dry compressed air
: - 20°C to + 80°C (- 4°F to + 176°F): 50 ~ 60 dBA
Series MD
Max. vacuum level
Max. flow rate
Supply air pressure
Air consumption
Supply air type
Working temp.
Noise level
: - 75 kPa (- 22.1 inHg)
: 362 Nl/min (12.8 scfm)
: 4 ~ 6 bar (58 ~ 87 psi),
max 7 bar (101.5 psi)
: 70 ~ 104 Nl/min (2.5 ~ 3.7 scfm)
: Dry compressed air
: - 20°C to + 80°C (- 4°F to + 176°F): 50 ~ 60 dBA
Series MDL
Based on VMECA Vacuum CartridgeMD-PUMP
< Robot Arm >
< Vacuum JIG >
High vacuum level (-92 kPa / -27.1 inHg) at low compressed air pressure (3~6 bar / 43.5~87 psi)High vacuum flow rate to compensate for fluctuating or low compressed air pressure.Suitable for sealed system applications such as lifting metal sheets or glass plate.
Located at or near the point of use thus reducing system volume, increase and reducing cycle time.
Compact in size and light weight.
Maintain vacuum despite fluctuations and drops in air pressure
VMECA Twofold Silencer assures low noise levels (about 30% lower than conventional silencer)
Adjustable exhaust direction
Optional Air-saving kit (AS-KIT) available to minimize energy consumption.
Optional factory installed air control/vacuum release valves and digital vacuum switch available.
Easily mountable and interchangeable vacuum cartridge (save the maintenance time)
Extra high vacuum flow rate and suitable for non-sealed system applications.Vacuum level of -75 kPa (-22.1 inHg) at a compressed air pressure of 6 bar.
Series MD
Series MDL
Main advantages
Applications
Specifications subject to change without notice.10
VACUUM PUMP
www.vmeca.com10
Based on VMECA Vacuum CartridgePM-PUMP (Premium)
Max. vacuum level
Max. flow rate
Supply air pressure
Air consumption
Supply air type
Working temp.
Noise level
Max. vacuum level
Max. flow rate
Supply air pressure
Air consumption
Supply air type
Working temp.
Noise level
Series PM
Series PML
: - 92 kPa (-27.1 inHg)
: 341~1364 Nl/min (12.04~48.17 scfm)
: 3 ~ 6 bar (43.5 ~ 87 psi),
max 7 bar (101.5 psi)
: 97~608 Nl/min (3.4~21.4 scfm)
: Dry compressed air
: - 20°C to + 80°C (-4°F to + 176°F): 60 ~ 65 dBA
: - 75 kPa (-22.1 inHg)
: 362~1448 Nl/min (12.8~51.5 scfm)
: 4 ~ 6 bar (58~87 psi),
max 7 bar (101.5 psi)
: 70 ~ 416 Nl/min (2.5~14.7 scfm)
: Dry compressed air
: - 20°C to + 80°C (-4°F to + 176°F): 60 ~ 65 dBA
High vacuum level (-92 kPa / -27.1 inHg) at low compressed air pressure (3~6 bar / 43.5~87 psi)High vacuum flow rate to compensate for fluctuating or low compressed air pressure.Suitable for sealed system applications such as lifting metal sheets or glass plate.
Maintain vacuum despite fluctuations and drops in air pressure.
Various connection ports are available.
Fast evacuation time.
Optional Air-saving kit (AS-KIT) available to minimize energy consumption.
Optional factory installed air control / vacuum release valves and digital vacuum switch available.
Strong with aluminum body.
Easily mountable and interchangeable vacuum cartridge. (save the maintenance time)
Modular design.
Extra high vacuum flow rate and suitable for non-sealed system applications.Vacuum level of -75 kPa (-22.1 inHg) at a compressed air pressure of 6 bar.
Series PM
Series PML
Main advantages
Applications
Max. vacuum level
Supply air pressure
Supply air typeWorking temp.Noise level
11
VACUUM PUMP
www.vmeca.com Specifications subject to change without notice.
Based on VTEC multi-stage nozzlesKeyboard-Pumps
: VKX - 92 kPa (- 27.16 inHg)
VKM - 85 kPa (- 25.1 inHg)
: VKX 23 Nl/m (0.81scfm)
VKM 26 Nl/m (0.91scfm)
: VKX 62 Nl/m (2.19 scfm)
VKM 74 Nl/m (2.61 scfm)
: VKX 109 Nl/m (3.85 scfm)
VKM 135 Nl/m (4.76 scfm)
: 3 ~ 6 bar, Max. 7 bar
(43.5 ~ 87 psi, Max 101.5 psi)
: Dry compressed air
: - 20°C to + 80°C (- 4°F to + 176°F): 50 ~ 65 dBA
Mini-Keyboard(10mm)Max. flow rate
Midi-Keyboard(17mm)Max. flow rate
Mega-Keyboard(17mm)Max. flow rate
High efficiency VMECA vacuum pump (Multi-Nozzle type.)
Quick response
Easy to install and Compact size (10mm or 17mm)
Available of individual control.
Automatic Vacuum filter cleaning system.
Light weight.
Integrated Vacuum Pump, Air supply & vacuum release conrol valve, Vacuum Switch & filter,
Blowing flow control valve and silencer in a body.
Main advantages
Applications
R
New solution withVMECA VACUUM SPEEDER
Specifications subject to change without notice.12
VACUUM SPEEDER
www.vmeca.com 12www.vmeca.com
Max. vacuum level
Max. flow rate
Supply air pressure
Supply air type
Working temp.
Noise level
VCS 202 18M20 / 38M20 / 12M20
Vacuum Compressed-air
Vacuum pump
Vacuum filter
Level compensator
Suction cup + + +
Based on VMECA Vacuum CartridgeVACUUM SPEEDER
: - 90 kPa (- 26.5 inHg)
: 41.3 Nl/min (1.45 scfm)
: 3 ~ 6 bar (43.5 ~ 8 7psi), max 7 bar (101.5 psi)
: Dry compressed air
: - 20°C to + 80°C (- 4°F to + 176°F)
: 55 ~ 65 dBA
VACUUM
Air inlet port - G1/8
VMECA Vacuum Cartridge
Silencer
Vacuum release port - M5
Vacuum Filter
Vacuum connection portG1/8 G38 G1/2
COMPRESSED AIR
VMECA multi-stage vacuum cartridge with silencer built into level compensator.
VMECA vacuum speeder mounted close to work (Fast response).
High operational reliability despite fluctuating or low compressed-air pressure.
Low air consumption (Save energy).
Compact size.
Easily mountable and interchangeable vacuum cartridge.
Typical installation(Old system)
Main advantages
Faster release (blow-off) and efficient cleaningof suction cup filters can be achieved by addingcontrolled compressed air to extra vacuum ports.
Use a VSM (Vacuum Speeder) as a slave unit with vacuum suppliedby another VSM in sealed applications or in applications where quick response time is not required.
Automatic faster release (blow-off) by inflow device ofoutside air is available without any release control valveor line. (Patent pending)
To prevent the Vacuum Speeder from rotating whenmounted in the top position use a guide pin insertedinto the M5 port on the top of the VSM and extendedinto the t-frame slot.
13
Max. vacuum level
Max. flow rate
Supply air pressure
Air consumption
Supply air type
Working temp.
Noise level
: - 90 kPa (- 26.6 inHg)
: 85 Nl/min (3.0 scfm)
: 3 ~ 6 bar (43.5 ~ 87 psi), max 7 bar (101.5 psi)
: 17 ~ 35 Nl/min (0.6 ~ 1.2 scfm)
: Dry compressed air
: - 20°C to + 80°C (- 4°F to + 176°F): 50 ~ 60 dBA
Max. vacuum level
Max. flow rate
Supply air pressure
Air consumption
Supply air type
Working temp.
Noise level
: - 90 kPa (- 26.6 inHg)
: 40 Nl/min (1.4 scfm)
: 3 ~ 6 bar (43.5 ~ 87 psi), max 7 bar (101.5 psi)
: 17~35 Nl/min (0.6 ~ 1.2 scfm)
: Dry compressed air
: - 20°C to + 80°C (- 4°F to + 176°F): 50 ~ 60 dBA
Based on VMECA Vacuum CartridgeVSM / VSMR (Vacuum Speeder)
Series VSM 203 / VSMR 203
Series VSM 202 / VSMR 202
13
VACUUM SPEEDER
VACUUM
VACUUM RELEASEON / OFF
VACUUM ON / OFF
SLAVE UNIT
VACUUM RELEASE
GUIDE PIN
VACUUM VACUUM RELEASE
INFLOWDEVICE
Specifications subject to change without notice.www.vmeca.com
Efficient individul and independent point-of-use vacuum.
Extremely quick response.
Multiple connection ports available.
Quick release system without release control valve.
Maintains vacuum despite fluctuations and drops in air pressure.
VMECA Twofold SilencerPT assure low noise levels. (about 30% lower than conventional silencer)
Main advantages
Specifications subject to change without notice.14
V - GRIP
www.vmeca.com
Based on VMECA Vacuum CartridgeV - GRIP
Max. vacuum level
Max. flow rate
Supply air pressure
Air consumption
Supply air type
Working temp.
Noise level
Series VG: - 74 kPa (- 21.85 inHg)
: 1448 Nl/min (51.1 scfm)
: 4 ~ 6 bar (58 ~ 87 psi), max 7bar (101.5 psi)
: 416 Nl/min (14.6 scfm)
: Dry compressed air
: - 20°C to + 80°C (- 4°F to + 176°F)
: 55 ~ 65 dBA
VMECA Patented Vacuum Cartridge System
- High operational reliability despite fluctuating or low compressed air pressure.
- Multiple Vacuum cartridge available up to 4cartridges to high vacuum flow & levels.
- Easily mountable and interchangeable vacuumcartridge.
- Compact size & light weight.
Vacuum Port
- G1/8
- Available vacuum release valves.
Air Inlet Port
- G1/4
Mounting Slot
- Easy mounting
Main Body
- High operational reliability despite fluctuating
Modular design gripper system integrated with high efficient multi-stage VMECA vacuum cartridges.
Handles various products with different shapes, sizes and porous materials
Flexible sealing foam to excellent grip both even & uneven surface products.
Adjustable check valve holes & perfect closure of the idle suction ports.
Durable and light weight aluminum body frame.
Easy installation and low maintenance.
Internal Free Flow Silencer
- Assure low noise level.
- Free air flow design to minimizevacuum lose due to back pressure.
- No dust collection.
Flexible Sealing Form
- Excllent grips both even & uneven surface products.
- Long life time.
- Easy replacement.
Choked
Check Valve Module
- Closes idle suction ports for no vacuum loss
- Handles porous & non-porous materials
- Adjustable check valve holes accordingto handling products
Main advantages
15
V - GRIP
www.vmeca.com Specifications subject to change without notice.
Applications
Specifications subject to change without notice.16 www.vmeca.comwww.vmeca.com
FLOATING SUCTION CUP
FLOATING SUCTION CUP
4 ~6(58 ~ 87)
AI : 21Peek : 11.5NF 20 06
ModelWeight
g
Operatingpressurebar (psi)
Air consumptionNl/min(scfm)
4bar 5bar 6bar
75(2.64)138
(4.87)
53(1.87)
120(4.2)
105(3.7)
160(5.6)
82(2.89)166
(5.86)
68(2.4)
128(4.5)
123(4.3)
190(6.7)
90(3.18)198
(6.99)
82(2.9)
135(4.7)
126(4.4)
223(7.8)
1.96(0.2)1.96(0.2)
2.84(0.29)
4.8(0.49)
5.78(0.59)
9.7(0.99)
2.15(0.22)2.15
(0.22)
3.82(0.39)
5.78(0.59)
7.74(0.79)
12.2(1.25)
2.15(0.22)2.15
(0.22)
4.8(0.49)
6.66(0.68)
8.72(0.89)
14.6(1.49)
Holding force, N (kg)at different pressure
4bar 5bar 6bar
PCB board Solar cell Metal Film CD & DVDThin products Paper-board Mirrors Wood Plastic
Non-contact handling item
Intergrated multi-stage nozzle
Low air consumption
Large vacuum flow and powerful suction force
Safe gripping with mark free
No moving parts
Excellent gripping with metal sheet withholes, convex or concave work pieces
4 ~6(58 ~ 87)
AI : 21Peek : 11.5NF 20 12
4 ~6(58 ~ 87)
AI : 55Peek : 30NF 40 06
4 ~6(58 ~ 87)
AI : 55Peek : 30NF 40 12
4 ~6(58 ~ 87)
AI : 130Peek : 70NF 60 06
4 ~6(58 ~ 87)
AI : 130Peek : 70NF 60 12
Based on VTEC multi-stage nozzles
Main advantages
Suitable for handling
Technical data
Specifications subject to change without notice. 17
VALOCK (Vacuum Auto Lock System)
Series VG25 / VG40 / VG50Max. vacuum level
Max. flow rate
Supply air pressure
Air consumption
Brake force
Acceptable angel
Lock torque
Supply air type
Working temp.
Noise level
Old systemThe typical installation which is using with Ball Joint is easy toshakes handling item and tilts to heavy direction on the transfer.So it is necessary of a lot of suction devices to keep holdhandling item and various vacuum jigs for different positioningby product’s shape.
New solution with VALOCKThe VMECA VALOCK is automatically positioningand powerfully fixes a shaking part to transfer workpiece safely. So it can safely transfers work pieceby one suction cup with VMECA VALOCK.
17www.vmeca.com
: - 86 kPa (-25.4 inHg)
: 85 Nl/min (3 scfm)
: 5 ~ 7 bar, max 7 bar(72.5 ~ 101.5 psi, max 101.5 psi)
: 34 ~ 40 Nl/min (1.2~1.41 scfm)
: max. 43 kgf
: 15° X 360°: max. 35 kg.cm
: Dry compressed air
: - 20°C to + 80°C (- 4°F to + 176°F): 50 ~ 60 dBA
VALOCK SYSTEM
Based on VMECA Vacuum Cartridge
Save time
Save cost
Save space
Increase productivity
“New solution to in
crease
your productivity b
y flexible
auto-positioning”
Integrated Auto-locking system.
Not shaken or change positioning of handling item on the transfer.
Automatic flexible positioning with handling items. (No need vacuum JIG or clamp - lower capital cost)
Integrated VMECA Vacuum Cartridge pump with compact design. (Quick response time)
Automatic release. (No need vacuum release control valve)
Main advantages
Model
Max. vacuum levelMax. flow rate
Specifications subject to change without notice.18
VACUUM PUMPS
www.vmeca.com18
Based on VTEC multi-stage nozzleVMECA-Pumps
One-line pump
Mini multiple pump
Midi multiple pump
Mini pump
: VTOX5 x N (up to 16 stack) / VTOM 5 x N (up to 16 stack)VTOX10 x N (up to 12 stack) / VTOM 10 x N (up to 12 stack)
: VTOX : - 92 kPa (- 27.17 inHg) / VTOM : - 85 kPa (- 25.1 inHg)
: VTOX : 32 Nl/min x N (1.13 scfm) / VTOM : 35 Nl/min x N (1.23 scfm )
: VTX5 x N (up to 16 stack) / VTM5 x N (up to 16 stack)VTX10 x N(up to 12 stack) / VTM10 x N(up to 12 stack)
: VTX : - 92 kPa (- 27.17 inHg) / VTM : - 85 kPa (- 25.1 inHg)
: VTX : 32 Nl/min x N (1.13 scfm) / VTM : 35 Nl/min x N (1.23 scfm)
: VTX5 ~ 10 (up to 2~6 stack) / VTM5 ~ 10 (up to 2~6 stack)
: VTX : - 92 kPa (- 27.17 inHg) / VTM : - 85 kPa (- 25.1 inHg)
: VTX : 185 Nl/min x N (6.53 scfm) / VTM : 220 Nl/min x N (7.77 scfm)
: VTX5 ~ 10 ( A, B, C ) / VTM5 ~ 10 ( A, B, C )
: VTX : - 92 kPa (- 27.17 inHg) / VTM : - 85 kPa (- 25.1 inHg)
: VTX : 185 Nl/min (6.53 scfm) / VTM : 220 Nl/min (7.77 scfm)
Main advantages
All vacuum ports operate independent of each other. (Do not affect each other port)
Enables vacuum control and vacuum release while utilizing only two input valves.
Can be used vacuum port for purging work filter cleaning function.
Model
Max. vacuum levelMax. flow rate
Main advantages
Independent operation of each vacuum line.
Can be operated with a single compressed air control valve.
Vacuum line does not affect the performance of the other line.
Model
Max. vacuum level
Max. flow rate
Main advantages
Modular manifold based system.
Can be integrated vacuum filters directly on the pumps.
Single control valve is used to for operation of this modular system.
Model
Max. vacuum level
Max. flow rate
Main advantages
Building blocks for the VMECA Modular pump system.
Excellent vacuum characteristics in terms of both flow and vacuum levels with minimalair usage.
Specified with a vacuum switch or a quick release module attached directly onto the pump.
Applications
19
VACUUM PUMPS
www.vmeca.com Specifications subject to change without notice. 19
Based on VTEC multi-stage nozzleVMECA-Pumps
M / X - Duplex pump
L / VL / M / X / H - Classic pump
MM / MX / H - Midiflex pump
Mega pump
: VTX20 ~ 60 KD / VTM20 ~ 60KD
: VTX : - 92 kPa (- 27.17 inHg) / VTM : - 85 kPa (- 25.1 inHg)
: VTX : 332 Nl/min (11.72 scfm) / VTM : 390 Nl/min (13.77 scfm)
: VTM 25L ~ 100L / VTL25 ~ 200 / VTM25 ~ 200 / VTX25~ 75 / VTH50~150
: - 91 kPa (- 26.87 inHg) / - 80 kPa (- 23.62 inHg) / - 92 kPa (- 27.17 inHg)- 97 kPa (- 28.64 inHg) / - 100.8 kPa (- 29.76 inHg)
: 1370 Nl/m (48.43 scfm) / 2061 Nl/m (72.78 scfm) / 1580 Nl/m ( 55.8 scfm)521 Nl/m (18.4 scfm) / 521 Nl/m (18.4 scfm)
: VTMM100 ~ 200F / VTMX100 ~ 300 / VTH300
: - 92 kPa (- 27.17 inHg) / - 97 kPa (- 28.64 inHg) / - 100.8 kPa (- 29.76 inHg)
: 2200 Nl/m (77.69 scfm) / 1355 Nl/m (47.85 scfm) / 1042 Nl/m (36 .8 scfm)
: VTML200 ~ 1200: - 92 kPa (- 27.17 inHg) : 14460 Nl/min (510.6 scfm)
Model
Max. vacuum levelMax. flow rate
Main advantages
Includes two mini pump to provide excellent flow characteristics in a compact andfiexible package.
Multiple connection ports.
Be offered with a pressure switch mounted piggy back to one of the pumps
Model
Max. vacuum level
Max. flow rate
Main advantages
Represents the most significant base of multi-stage venturi pumps offered.
Offer high volume flow rates and excellent vacuum levels with minimal air usage.
Model
Max. vacuum levelMax. flow rate
Main advantages
Very high vacuum flow rates in a compact package.
Dual vacuum ports, a pressure gauge and a vacuum gauge.
Model
Max. vacuum level
Max. flow rate
Main advantages
Largest compressed air-driven vacuum pump. (compact and light weight)
Applicable to larger air volume to be evacuated or to compensate for the leakage flow
Complete with vacuum gauge, pressure gauge and mechanical ON/OFF valves.
Applications
Specifications subject to change without notice.20
SUCTION CUPS
www.vmeca.com20
VB series (Bellows) VBF series (Bellows Flat) VB-M series VBL series (Bellows Long)
VU series (Universal) VF series (Flat) VFC series (Flat Curved) VD series (Deep)
VS series (Sponge) KPS series (Plastic Bag Opening) VOU series (Oval Universal) VOC series (Oval Curved)
FeaturesSlightly curved surfcesCan be fitted directly to onto a piece of pipeNo fittings required
UsesCardboard, packaging machines,thin film sheets, sheet veneer, plastic sheets
FeaturesSlightly curved surfacesExcellent for compensating fordifference in level and curvatureGood for sheet separation
UsesPlywood, paper board boxes, thin film, electronic parts
FeaturesIdeal for curved or irregular surfacesCan be used for around comers ofproductsCan be used for gripping edges of products
UsesAutomotive press relief feed, plasticsheets, sheet veneer shaped sheet metal panels, packaging industry and plywood.
FeaturesSpecifically designed to cope withboth flat and curved surfacesCan handle multiple applicationswith one padIdeal for automotive environment
UsesAutomobile windshields, roofs and doorpanels, sheet metal, TV picture tubes
FeaturesExcellent for parallel and horizontalplane lifting applicationsHigh lifting capacityFeet provide additional adhesion to reduce shearLarge pad sizes available(300mm)
UsesFragile objeects, eggs, breadglass and general food stuffs
FeaturesCan cope with small degreeof concave curvatureHight lifting capacityVery small pad size available(1.5mm)
UsesSmall compontens, semiconductorchips, packaging materials, printing industry
Features
Ideal for round and uneven surfacesSoft sponge pad provides excellent sealVery large sizes available (400mm)Even more effective when used withball joint
UsesMarble, paving slabs, bricksrough wood, masonry
Features
Designed for bag opening applicationsMuliple materials available
UsesPlastic bag opening, thin film materials,paper bag handling
Features
Best suitable for handling long objectswith flat and curved surfaces.Good lifting forces can be achived withsmall size.Conductives silicon is excellent for handling PCB board or Electroniccomponents.
UsesSemiconductor chips (PCB board)Electronic components.Small glass cases (e.g.ampoule), Pipe
FeaturesGood for use on curve surface and forseparating thin sheets of materialsVery good at compensating for a degree of difference in level and curvature of the work pieceProtect dust coming into the pump when useing PE filter inside of the cup.The feet inside the pad provide a good register as well as enhancing the adhesion to the srface.
UsesVeneer Sheets, Plastic Sheets, PaperBoxes Handing, Cardboard Boxes, Metal Sheets, Plastic
Features
Ideal for long objects with either flat or curved surfacesThick and durable lipSuuitable for both horizontal and parallelapplications
UsesLong objects with either flat or curved surface, pipe, shaped sheet metal panels, automotive bumpers
FeaturesGreater degree of heightcompensatuion than regular bellowsProvides a buffering effect
UsesFragile objects, eggs, bread,glass and general food stuffs
21
APPLICATIONS
www.vmeca.com Specifications subject to change without notice. 21
Pick & place / VMECA Midi keyboard pump
Automobile panel JIG / VMECA Classic pump & suction cup
Palletizing robot / VMECA Classic pump & VB CUP
Automobile windshield handling / VMECA VD CUP Packaging industry / VMECA Turtle pump & Suction cup
Specifications subject to change without notice.22
WATER FREE
www.vmeca.com22
VMECA WATER FREE
WF 01 - AWF 34 - AWF 12 - AWF 38 - AModelMax. Flow rate (Nl/min / scfm)
Pressure drop (bar / psi)
Operating pressure (bar / psi)
Water drain effect (%)
Drainage method
Port size
Drain outlet
Weight (Kg)
Size (mm)
0.2 bar / 2.9 psi
3 ~ 9.8 bar / 43.5 ~ 142 psi
99Automatic
Outer Diameter 6 hose one touch fitting1.85 2.85
Moisture
Compressor Compressed Air
Pipe / Air Hose ( 15m)
VMECA WATER FREE Dried Air
Spray printing Equipment
Assemble the Water-Free vertically for optimum performance.
Pipe / Air hose should be over 15 meters.
Installation should be made closest to the vacuum pump possible.
If F. R. L. unit is used, Water-Free should be installed right before theF. R. L. Unit
Excellent remmoval water up to 99%.
No filter element replacement.
Less pressure loss.
No effect in performance by time, flow rate,moisture proportion.
Simple design and No moving parts.
No electric power required.
Air-dryer substitute.
Extended pneumatic products lifetime.
Failure reduction of pneumatic products.
Reduction of maintenance time and cost andpneumatic products.
Improvement in quaility.
1,300 / 45.9
G3/8
90 x 362
3,000 / 106
G3/4
106 x 433
5,000 / 176.6
G1
106 x 433
2,000 / 70.6
G1/2
90 x 364
Main advantages
WATER FREE installation
ApplicationEletrical and electronics industriesSemiconductor linePhamaceutical produce lineFood processing lineCosmetic factoryCar assembling linePowder transferingWooden machinePrecision machine toolFebrics manufactureNC machineVarious air tools Various air cylinder
Chemical facilitiesPaint facilityPackaging machineElectric power plantPrinting power plantShip manufactureAir motors Air bearing
23
ACCESSORIES
www.vmeca.com Specifications subject to change without notice. 23
Prevents contaminants and dust from entering the pump (5 micron, 20 micron efficiency)Replaceable elements, simple assembly and disassemblyStandard and long bowl sizes availableStandard mounting bracket can be attached to either side of units5 different sizes
Features
Transfers electrical and/or pneumatic signals when desired vacuum/pressure is achievedDigital, LED, Analog, pneumatic and mechanical types availableMany models panel mountableSome models designed to be direct mounted on pumps
Features
VMECA Motion Technology
Compensates for differences in height of object to be liftedReduced demand for exact height adjustmentOffers a degree of shock absorptionMany configurations of size spring and stroke
Features2/2 Way solenoid valve G1/8 , G1/4 G3/8 (for air control) indirectlyoperated with spring return.This valve compact and can control high flow rate of air.Double solenoid valve G1/4 .(VMS 14D)
Features
Compensates for bending stresses placed on suction cupsMost frequently used with flat cupsIntegral vacuum port through the center of the joint
FeaturesPressure gauge measures 0~10 bar (0 ~145 PSI)±2.5% FSDVacuum gauge measures 0 to -30 inHg (0 to -100kpa)±l.6% FSDBoth panel mountable
Features
Vacuum Filters Vacuum / Pressure Switches
Level Compensators (Springs) Control Valves
Ball Joints Gauges
copyright KPS Co.,Ltd. All Right Reserved. (1006024 i)
V’tec Vakuum Technologie GmbHAuf dem Bruhl 6D-72658 Bempflingen, GermanyTel. +49(0)7123/932834Fax. +49(0)7123/932865http://www.vmeca.come-mail : [email protected]
Germany Asia
VTEC / KPS Co.,Ltd.RM206.Saehan Venture World B/D113-15, Shiheung-dong, Geumcheon-gu,Seoul, KoreaTel: +82-2-2617-5008 (Rep.) Fax: +82-2-2617-5009http://www.vmeca.come-mail: [email protected]
USA
VtecUSA, Inc.1305 N. San Gabriel Bl., #203,South San Gabriel, CA 91770Tel: +1-213-258-7114(Rep.)Fax: +1-626-569-9978http://www.vtecusa.come-mail: [email protected]
Service Networks
VMECA VACUUM CONVEYOR
Argentina Australia Austria BelgiumCanada China Colombia DenmarkFrance India Indonesia Iran Israel Italy Lebanon Malaysia Mexico Netherlands New Zealand NorwayPhilippine Poland Spain SwedenSwitzerland Singapore Taiwan Thailand Turkey UK Japan
Distributor
c