Date post: | 08-Feb-2016 |
Category: |
Documents |
Upload: | carlos-herrera |
View: | 249 times |
Download: | 35 times |
VoIP: CallManager Grundlagen
BASF IT Services
Seite 2
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Contents
Cisco CallManager Architecture Hardware Installation Skinny Protocol Configuration Features Troubleshooting Administration Links
Seite 3
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Cisco CallManager Architecture
Cisco Architecture for Voice, Video and Integrated Data (Cisco AVVID) is a suite of components that includes Internet Protocol (IP) telephony communications.Cisco CallManager is the call routing and signaling component for IP telephony in a Cisco AVVID IP Telephony network.
Seite 4
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Cisco CallManager Architecture Cont.
Seite 5
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Cisco CallManager Functions
Seite 6
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: CallManager
The Cisco CallManager is the software-based call-processing component of the Cisco IP telephony solution.
The software extends enterprise telephony features and functions to packet telephony network devices such as IP phones, media processing devices, voice-over-IP (VoIP) gateways, and multimedia applications. Additional data, voice, and video services such as unified messaging, multimedia conferencing, collaborative contact centers, and interactive multimedia response systems interact with the IP telephony solution through Cisco CallManager’s open telephony application programming interface (API).
Seite 7
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: CallManager Cont.
The Cisco CallManager software product includes a suite of integrated voice applications that performs voice conferencing and manual attendant console functions.
The salient benefit of all these voice applications is that special-purpose voice processing hardware is not required.
Supplementary and enhanced services such as hold, transfer, forward, conference, multiple line appearances, automatic route selection, speed dial, last-number redial, and other features are extended to IP phones and gateways.
Because it is a software application, enhancing ist capabilities in production environments is a matter of upgrading software on the server platform, thereby avoiding expensive hardware upgrade costs.
Seite 8
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: CallManager Cont.
Further, Cisco CallManager and all phones, gateways, and applications may be distributed across an IP network, providing a distributed, virtual telephony network.
The benefit of this architecture is improved system availability and scalability. Call admission control ensures that voice quality of service (QoS) is maintained across constricted WAN links, and automatically diverts calls to alternate Public Switched Telephone Network (PSTN) routes when WAN bandwidth is not available.
Seite 9
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: CallManager Layers Cont.
Seite 10
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: CallManager Layers Cont.
The Link Layer The function is to ensure that if a device sends a packet of information to CM, or CM sends a packet of information to a device, the sent packet is received. CM uses two methods of communication. TCP and UDP. CM uses TCP for call signaling and media control with IP phones, H.323 gateways, media devices, and other CM nodes. The CM uses UDP for communication with MGCP gateways.
The Protocol LayerIt includes the logic that CM uses to manage the different types of devices tha tip support. The device include the media devices, trunk devices, and station devices. It also support third-party integration with CM though the TAPI and JTAPI protocols.
Seite 11
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: CallManager Layers Cont.
The Aggregator LayerIt allows CM to properly handle the interaction between groups of related devices. The media resource manager, for example, permits one CM node to locate available media devices, even if they are registered to other CM nodes.
The Media Control LayerIt handles the actual media connections between devices
The Call Control LayerIt handles the basic call processing of the system. It locates the destination that a caller dials and coordinates the Media Control, Aggregator and Protocol Layers. Furthermore, it provides the primitives that the Supplemantary Service Layer uses to relate independent calls.
Seite 12
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: CallManager Layers Cont.
Supplemantary Service LayerIt relates independent calls together as part of user-requested features such as call transfer, conference, and call forwarding.
Seite 13
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Operating System
Seite 14
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Cluster
Seite 15
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Cluster Cont.
Seite 16
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Cluster Cont.
Seite 17
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Cluster Cont.
Seite 18
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Cluster Cont.
Seite 19
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Clustering Options
Seite 20
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Data Source
Seite 21
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Database reads
Seite 22
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Data Source Replication
Seite 23
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
Recreating Subscriber Connections
Seite 24
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Recreating Subscriber Cont.
http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/products_tech_note09186a0080094aeb.shtml
Seite 25
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: DC Directory
DC (Data Connection) Directory Manager is the superuser account for the integrated Lightweight Directory Access Protocol (LDAP) database in Cisco IP Telephony systems. The default DC Directory Manager password for Cisco CallManager systems is ciscocisco.
Seite 26
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Backup Utlity Tool
The Cisco IP Telephony Applications Backup Utility provides a reliable and convenient way to perform regularly scheduled automatic or user-invoked backups of your data.
This utility supports the following applications: Cisco CallManager Cisco Customer Response Solutions (CRS) Cisco CDR Analysis and Reporting (CAR) Cisco Emergency Responder
Seite 27
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Backup Utility Cont.
Seite 28
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
Restore from Backup
Seite 29
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Windows 2000 Services on Cisco AVVID IP Telephony Servers
Cisco CallManager Cisco TFTP Cisco Database Layer Monitor Cisco Messaging Interface Cisco IP Voice Media Streaming Application Cisco Telephony Call Dispatcher Cisco CTIManager Cisco MOH Audio Translator Cisco RIS Data Collector Cisco Extended Functions
Seite 30
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Windows 2000 Services on Cisco AVVID IP Telephony Servers Cont.
Cisco CallManager ServiceThe Cisco CallManager service runs on the Cisco IP Telephony Applications Server to provide software-only call processing as well as signaling and call control functionality. You install the Cisco CallManager service from the Cisco CallManager CD.
Cisco CDR Insert ServiceWhen you enable call detail record (CDR) collection, Cisco CallManager writes CDRs to flat files on the subscriber databases as calls are made. The Cisco CDR Insert service periodically inserts the records from these files into the publisher centralized SQL database. The Cisco CDR Insert service does not insert a record if the CDR Format enterprise parameter has a value of Flat.
Seite 31
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Windows 2000 Services on Cisco AVVID IP Telephony Servers Cont.
Cisco TFTPCisco Trivial File Transfer Protocol (TFTP) builds and serves files consistent with the trivial file transfer protocol, a simplified version of FTP. Cisco TFTP serves embedded component executable, ringer files, and device configuration files. A configuration file includes a list of Cisco CallManagers to which devices (telephones and gateways) make connections. When a device boots, the component queries a Dynamic Host Configuration Protocol (DHCP) server for its network configuration information. The DHCP server responds with an IP address for the device, a subnet mask, a default gateway, a Domain Name System (DNS) server address, and a TFTP server name or address. The device requests a configuration file from the TFTP server. The configuration file contains a list of Cisco CallManagers and the TCP port through which the device connects to those Cisco CallManagers.
Seite 32
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Windows 2000 Services on Cisco AVVID IP Telephony Servers Cont.
Cisco Database Layer Monitor ServiceThe Cisco Database Layer Monitor service monitors aspects of the database layer as well as call detail records (CDR). The database layer comprises a set of dynamic link libraries (DLL) that provide a common access point for applications that need to access the database to add, retrieve, and change data. The Cisco Database Layer Monitor service performs functions such as determining whether the primary server is available during failover, deleting the oldest CDRs when the limit defined in the MaxCDRecords parameter is reached, and moving CDRs from a subscriber to the primary database at a given interval, if needed.
Seite 33
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Windows 2000 Services on Cisco AVVID IP Telephony Servers Cont.
Cisco Messaging Interface ServiceThe Cisco Messaging Interface allows you to connect a simplified message desk interface (SMDI)-compliant external voice-mail system with the Cisco CallManager. The CMI service provides the communication between the voice-mail system and Cisco CallManager. The SMDI defines a way for a phone system to provide a voice-mail system with the information needed to intelligently process incoming calls.
Seite 34
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Windows 2000 Services on Cisco AVVID IP Telephony Servers Cont.
Cisco IP Voice Media Streaming Application ServiceThe Cisco IP Voice Media Streaming Application provides voice media streaming functionality for the Cisco CallManager for use with MTP, conferencing, and music on hold (MOH). The Cisco IP Voice Media Streaming Application relays messages from the Cisco CallManager to the IP voice media streaming driver. The driver handles the RTP streaming. The MTP and conference bridge components of the Cisco IP Voice Media Streaming Application support G.711 mu-law and a-law codecs. The MOH component supports G.711 mu-law/a-law, G.729a, and wideband codecs.
Seite 35
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Windows 2000 Services on Cisco AVVID IP Telephony Servers Cont.
Cisco Telephony Call Dispatcher ServiceTelephony Call Dispatcher (TCD) service provides centralized services for Cisco WebAttendant clients and pilot points. For Cisco WebAttendant clients, TCD provides call control functionality, line state information for any accessible line within the Cisco CallManager domain, and caching of directory information. For pilot points, TCD provides automatic redirection to directory numbers listed in hunt groups and failover during a Cisco CallManager failure.
Seite 36
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Windows 2000 Services on Cisco AVVID IP Telephony Servers Cont.
Cisco CTIManager ServiceThe CTI (Computer Telephony Interface) Manager contains the CTI components that interface with applications. With CTI Manager, applications have access to resources and functionality of all Cisco CallManagers in the cluster and have improved failover capability. One or more CTI Managers can be active in a cluster, but only one CTI Manager can exist on an individual server. An application (JTAPI/TAPI) can have simultaneous connections to multiple CTI Managers; however, an application can only use one connection at a time to open a device with media termination.
Seite 37
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Windows 2000 Services on Cisco AVVID IP Telephony Servers Cont.
Cisco MOH Audio Translator ServiceThe Cisco MOH Audio Translator service converts audio source files into various codecs, so they can be used by the MOH feature. When you install the Cisco IP Voice Media Streaming Application service, Cisco CallManager automatically installs this service.
Seite 38
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Windows 2000 Services on Cisco AVVID IP Telephony Servers Cont.
Cisco RIS Data CollectorThe Real-time Information Server (RIS) maintains real-time Cisco CallManager information and provides an interface through which the Cisco RIS Data Collector service and the SNMP Agent retrieve that information. One RIS exists on each node containing the Cisco CallManager service. The Cisco RIS Data Collector service provides an interface for applications, such as Cisco CallManager Serviceability and the Cisco CallManager Administration, to retrieve information stored in all RIS nodes in the cluster.
Seite 39
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Windows 2000 Services on Cisco AVVID IP Telephony Servers Cont.
The Cisco Extended Functions NT service provides support for some Cisco CallManager features, including Cisco Call Back and Quality Report Tool (QRT).
Seite 40
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Cisco IP Manager Assistant
The Cisco IP Manager Assistant User Guide provides instructions and examples to help you use the Cisco IP Manager Assistant (Cisco IPMA) feature.
ManagersA Cisco IPMA manager is a user whose incoming calls are intercepted and redirected. Additionally, a manager is supported by at least one assistant.
AssistantsA Cisco IPMA assistant is a user who handles calls on behalf of a manager.
Seite 41
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Hardware
Seite 42
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Cisco-Certified Servers
CallManager and ist associated services run on a Windows 2000 Server. However, because the voice applications are so critical to an enterprise´s functions, Cisco requires that CM be installed only on certified server platforms.
Seite 43
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Cisco-Certified Servers Cont.
Cisco MCS-7825-800 Cisco MCS-7835-1000 Compaq DL320 Compaq DL380 IBM xSeries 330 IBM xSeries 340
The Cisco MCS ship with an installation disk that contains all of the Windows 2000 services that are required to create a working IP telephony network. The Compaq and IBM are hardware-only.
Seite 44
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Supported Hardware
Seite 45
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: MCS 7835-1000
Seite 46
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: MCS 7835-1000 Cont.
Seite 47
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: MCS 7825-800
Seite 48
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: MCS 7825-800 Cont.
Seite 49
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Installation
Seite 50
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Installation Cont.
Seite 51
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: CCM Components
Seite 52
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Post Installation
Seite 53
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Upgrading
Seite 54
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Skinny Protocol
Skinny protocol is a lightweight, simple, stimulus protocol. The signaling path is a TCP/IP connection that the station established to CallManager on port 2000. The message set for the control of the station encompasses three basic areas: registration and station management, call control, and media stream (audio) control. CallManager direct the etablishment of the media connection, but the station and device to which the station is connected establish media stream directly to each other.
Seite 55
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
Calling Party Setup and Digit Analysis
Seite 56
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
Calling Party Setup
Seite 57
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
Called Party Setup and Ringing
Seite 58
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
Called Party Setup and Ringing
Seite 59
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
Answer Call and Media Transmission
Seite 60
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
Answer Call and Media Transmission
Seite 61
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Registration Process
Seite 62
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Call Processing
Seite 63
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: CCM Call-Control Protocols
Seite 64
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Sniffer Trace mit Ethereal
Seite 65
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Sniffer Trace mit Ethereal Cont.
Seite 66
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Sniffer Trace mit Ethereal Cont.
Seite 67
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Sniffer Trace mit Ethereal Cont.
Seite 68
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Configuration
Seite 69
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
Basic Cisco IP Phone Features
Seite 70
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: CCM Failover
Seite 71
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Partition and Calling Search Space
Seite 72
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Partition and Calling Search Space Cont.
Seite 73
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Partition
Seite 74
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Partition Configuration
Seite 75
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Calling Search Space
Seite 76
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Calling Search Space Cont.
Seite 77
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Konfigurationsbeispiel
Seite 78
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Server Configuration
Seite 79
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Cisco CallManager Group Configuration
Seite 80
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Date/Time Group
Seite 81
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Region Configuration Firma A
Seite 82
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Region Configuration Firma B
Seite 83
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Device Pool Configuration Firma A
Seite 84
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Device Pool Configuration Firma B
Seite 85
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Device Defaults
Seite 86
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Partition Firma A
Seite 87
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Partition Firma B
Seite 88
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Calling Search Space Firma A
Seite 89
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Calling Search Space Firma B
Seite 90
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Translation Pattern Firma A
Seite 91
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Translation Pattern Firma B
Seite 92
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Configure a Phone
Seite 93
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Phone Configuration Firma A
Seite 94
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Phone Configuration Firma A Cont.
Seite 95
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Phone Configuration Firma A Cont.
Seite 96
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Phone Configuration Firma B Cont.
Seite 97
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Phone Configuration Firma B Cont.
Seite 98
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Phone Configuration Firma B
Seite 99
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Phone Configuration Firma B Cont.
Seite 100
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Phone and Directory Number
Seite 101
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Add a user
Seite 102
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Add a user Cont.
Seite 103
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Device Association
Seite 104
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Auto-Registration
Seite 105
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Auto-Registration Cont.
Seite 106
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Auto-Registration Cont.
Seite 107
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Auto-Registration Cont.
Seite 108
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Auto-Registration Cont.
Seite 109
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Auto-Registration Cont.
Seite 110
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Dial Plan Functions
Seite 111
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Dial Plan Architecture
Seite 112
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Definition
Seite 113
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: External Route Elements
Seite 114
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Route Plan
Seite 115
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Route Pattern
Seite 116
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Route Pattern cont.
Seite 117
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Route Pattern Configuration
Seite 118
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Route Pattern Configuaration Firma A
Seite 119
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Route Pattern Configuration Firma B
Seite 120
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: H.323 Gateway Configuration
Seite 121
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: H.323 Gateway Configuration Cont.
Seite 122
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: H.323 Gateway Configuration Cont.
Seite 123
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: H.323 Gateway Configuration Cont.
Seite 124
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: H.323 Gateway Configuration Cont.
Seite 125
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Route Pattern Example
Seite 126
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Route Pattern Configuration
Seite 127
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Route List Configuration
Seite 128
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Route Group
Seite 129
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Route Group Cont.
Seite 130
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Route Group Cont.
Seite 131
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Route Group Cont.
Seite 132
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Assign Partion and Calling Search Space
Seite 133
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Simple Route Plan
Seite 134
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Route Plan Example 2
Seite 135
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Location Configuration
Use locations to implement call admission control in a centralized call processing system. Call admission control enables you to regulate voice quality by limiting the amount of bandwidth that is available for calls over links between the locations.
Seite 136
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Automated alternte routing (AAR)
Automated alternate routing (AAR) provides a mechanism to reroute calls through the PSTN or other network by using an alternate number when Cisco CallManager blocks a call due to insufficient location bandwidth. With automated alternate routing, the caller does not need to hang up and redial the called party. The AAR group represents the dialing area where the line/directory number (DN), the Cisco voice mail port, and the gateway are located. For each AAR group, you enter the prefix digits that are used for automated alternate routing within the AAR group, as well as the prefix digits used for automated alternate routing between a given AAR group and other AAR groups. Devices, such as gateways, phones (by means of directory numbers), and trunks,associate with AAR groups. If automated alternate routing of calls takes place, you may also associate devices with an AAR calling search space.
Seite 137
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Survivable Remote Site Telephony (SRST)
Seite 138
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: SRST Cont.
The SRST-enabled router supports: IP Phone to IP phone on router calls IP Phone to PSTN calls Multiple lines per IP phone Multiple line appearance across IP phones Call hold and pickup on a shared line Call transfer of local calls Caller ID information Support up to 24 phones on 2600 and 3620 platforms Support up to 48 phones on 3640 and 3660 platforms
Seite 139
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: SRST Cont.
Seite 140
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: SRST Configuration
Seite 141
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: SRST Configuration Cont.
Seite 142
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: How it works
Seite 143
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: How it works Cont.
Seite 144
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: How it works Cont.
Seite 145
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Features
Seite 146
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Call Park
Call Park The call park feature allows you to place a call on hold, so it can be retrieved from another phone in the system. For example, if you are on an active call at your phone, you can park the call to a call park extension such as 1234. Someone on another phone in your system can then dial 1234 to retrieve the call. You can define either a single directory number or a range of directory numbers for use as call park extension numbers. You can park only one call at each call park extension number.
Seite 147
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Call Pickup and Group Call Pickup
Call Pickup and Group Call PickupTwo features, call pickup and group call pickup, allow you to answer a call that comes in on a directory number other than your own. When you hear an incoming call ringing on another phone, you can redirect the call to your phone by using the call pickup feature.Cisco IP Phones provide two types of call pickup:
Call pickup allows users to pick up incoming calls within their own group. Cisco CallManager automatically dials the appropriate call pickup group number when a user activates this feature on a phone.
Group call pickup allows users to pick up incoming calls within their own group or in other groups. Users must dial the appropriate call pickup group number when a user activates this feature on a phone.
Seite 148
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Cisco IP Phone Services
Cisco IP Phone ServicesUsing Cisco CallManager Administration, you define and maintain the list of Cisco IP Phone Services to which users can subscribe at their site. Cisco IP Phone Services comprise XML applications that enable the display of interactive content with text and graphics on Cisco IP Phones 7960/7940. Cisco CallManager provides sample Cisco IP Phone Services applications. You can also create customized Cisco IP Phone applications for your site. After you configure the list of services, you can add services to the phones in the database. In Cisco CallManager Administration, you can view and modify settings for phones and device profiles. Users can log on to the Cisco IP Phone User Options application and subscribe to these services for their Cisco IP Phones.
Seite 149
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: IP Phone Services Configuration
Seite 150
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Meet-ME Number/Pattern
Meet-Me Number/PatternMeet-Me conferences require an allocation of directory numbers. Cisco CallManager Administration provides the Meet-Me conference directory number range to users, so they can access the feature.
Seite 151
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
Meet-Me
Seite 152
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Cisco Voice Mail Port
Cisco Voice Mail PortThe optional Cisco Unified Open Network Exchange (uOne) software and Cisco Unity software, available as part of Cisco IP Telephony Solutions, provide voice-messaging capability for users when they are unavailable to answer calls. This section describes the procedures that are required for adding and configuring, updating, and deleting Cisco voice-mail and the message waiting indication by selecting Voice Mail from the Feature menu of the Cisco CallManager window and choosing from the submenu options.
Seite 153
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Message Waiting
Message Waiting The Message Waiting Configuration window allows you to define a message waiting on or message waiting off directory number that a directory-connected based voice-messaging system uses to etermine whether to set or clear a message waiting indication for a particular Cisco IP Phone.
Seite 154
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Cisco Voice Mail Pilot
Cisco Voice Mail PilotThe voice mail pilot number designates the directory number that you dial to access your voice messages. Cisco CallManager automatically dials the voice-messaging number when you press the Messages button on your phone. Each pilot number can belong to a different voice-mail messaging system.
Seite 155
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Voice Mail Profile Configuration
Voice Mail Profile ConfigurationThe Voice Mail Profile Configuration window of Cisco CallManager Administration allows you to define any line-related voice-mail information that is associated to a directory number, not a device.
Seite 156
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Cisco Call Back
Cisco Call BackThe Cisco Call Back feature allows you to receive call back notification on your Cisco IP Phone when a called party line becomes available. To receive call back notification, a user presses the CallBack softkey while receiving a busy or ringback tone. You can activate call back notification on a line on a Cisco IP Phone within the same Cisco CallManager cluster as your phone. You cannot activate call back notification if the called party has forwarded all calls to another extension.
Seite 157
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Attendant Console
Cisco CallManager Attendant ConsoleCisco CallManager Attendant Console, a client-server application, allows you to set up Cisco IP Phones as attendant consoles. Employing a graphical user interface, the attendant console uses speed-dial buttons and quick directory access to look up phone numbers, monitor line status, and direct calls. A receptionist or administrative assistant can use the attendant console to handle calls for a department or company, or another employee can use it to manage his own telephone calls. The attendant console installs on a PC with IP connectivity to the Cisco CallManager system. The attendant console works with a Cisco IP Phone that is registered to a Cisco CallManager system. Multiple attendant consoles can connect to a single Cisco CallManager system. The application registers with and receives call-dispatching services from the Cisco Telephony Call Dispatcher (TCD) service on the Cisco CallManager.
Seite 158
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Troubleshooting
Seite 159
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Troubleshooting
Seite 160
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Troubleshooting Cont.
Seite 161
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Troubleshooting Cont.
Seite 162
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Troubleshooting Cont.
Seite 163
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Troubleshooting Cont.
Seite 164
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Phone Problem Reports Viewer
Phone Problem Reports ViewerYou can view the IP phone problem reports, that are generated by the Quality Report Tool (QRT), by using the Phone Problem Reports Viewer. QRT serves as a voice-quality and general problem-reporting tool for Cisco CallManager IP Phones. The Cisco Extended Functions service supports the QRT featureQRT uses the Cisco Extended Functions NT service, so it shares the same architecture as Cisco Call Back. It also shares the same system requirements, redundancy, dependencies, restrictions, installation, and activation as Cisco Call Back.
Seite 165
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Real-Time Monitoring
Understanding Real-Time MonitoringCisco CallManager Serviceability provides a web-based tool that monitors real-time behavior of the components in a Cisco CallManager cluster. The RTM tool uses HTTP and TCP to monitor device status, system performance, and device discovery. It also connects directly to devices using HTTP for troubleshooting system problems.
Seite 166
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Real-Time Monitoring Cont.
Monitor System PerformanceThe RTM tool displays performance information of all Cisco CallManager components in a cluster. The tool integrates with the Cisco CallManager administration and serviceability software. The RTM tool provides an alert notification mechanism to ease the system administrator troubleshooting tasks. The RTMtool monitors various aspects of the Cisco CallManager performance by periodically polling NT/2000 performance counter values
Seite 167
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Real-Time Monitoring Cont.
.Performance monitoring provides the following services: Monitors performance counters from the Cisco CallManager cluster,
including Cisco CallManager nodes, TFTP servers, and database servers.
Presents counters hierarchically for easy navigation. Associates counter threshold settings to alert notification. An e-mail or
popup message provides notification to the administrator. Permits saving and restoring settings, such as counters being
monitored,threshold settings, and alert notifications, for customized troubleshooting tasks.
Displays up to three counters in one chart for performance comparisons.
Seite 168
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Troubleshooting Cont.
Seite 169
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Troubleshooting Cont.
Seite 170
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Traces on Server
Seite 171
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Traces on Server Cont.
Seite 172
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: MOH and Phoneload on Server
Seite 173
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: MOH and Phoneload on Server Cont.
Seite 174
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Check the Phone Configuration
Seite 175
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Check the Phone Configuration Cont.
Seite 176
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Administration the Phone
Seite 177
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Webuser Oberfläche
Seite 178
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Webuser Oberfläche Cont.
Seite 179
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Webuser Oberfläche Cont.
Seite 180
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Webuser Oberfläche Cont.
Seite 181
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Webuser Oberfläche Cont.
Seite 182
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Webuser Oberfläche Cont.
Seite 183
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Webuser Oberfläche Cont.
Seite 184
roelmann@
hiconsult.de - CallM
anager-Workshop B
AS
F
CM: Links
Administration Guide 3.3(3) http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/3_3/
sys_ad/3_3_3/ccmcfg/index.htm
Features and Services Guide 3.3(3) http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/3_3/
sys_ad/3_3_3/ccmfeat/index.htm
System guide 3.3(3) http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/3_3/
sys_ad/3_3_3/ccmsys/index.htm
Herzlichen Dank für Ihre Herzlichen Dank für Ihre AufmerksamkeitAufmerksamkeit