AN ISO 9001 & 14001 COMPANY
TENDER DOCUMENT
TENDER No: DLI/CON/710/520
FOR
‘Construction of balance work for 1st Phase (B+G+IV) of Administrative Building of New Town Kolkata Development Authority at Plot No. DG/13,
Premises No.04-3333, Action Area – 1D, New Town, Kolkata.’
VOLUME – III
PRICE BID/ BILL OF QUANTITY
Tender No. DLI/CON/710/52 Date 12.02.2016
In Figures In Words In Figures In Words1 Construction of Balance works for 1st Phase
(B+G+IV) of Administrative Building of New
Town Kolkata Development Authority at Plot
No. DG/13, Premises No. 04-3333, Action Area
-1D, New Town, Kolkata.Rs. 30,06,60,206.00
In figures
In words
Rupees
QUOTING SHEET
TENDER FOR "CONSTRUCTION OF BALANCE WORK FOR FIRST PHASE (B+G+IV) OF ADMINISTRATIVE BUILDING OF NEW TOWN KOLKATA
DEVELOPMENT AUTHORITY AT PLOT NO. DG/13, PREMISES NO. 04-3333, ACTION AREA - 1D, NEW TOWN, KOLKATA"
BIDDER'S FINANCIAL OFFER :
Amount After adding percentage
above or at par or below
ESTIMATED COST
(IN Rs.)
DESCRIPTIONSl. No. Bidder's Price
% QUOTE ABOVE / AT PAR / BELOW
Rs.
SEAL & SIGNATURE OF BIDDER
Name of Project
NIT No.
SL. NO. DESCRIPTION OF WORK Total Amount
1 Civil Works 13,19,86,431.00₹
2 Flooring & Painting Works 2,27,78,581.00₹
3 Wood, Aluminium and Ground Improvements Works 4,74,95,529.00₹
4 Sanitary & plumbing Section 1,28,88,817.00₹
5 Additional Works - A 5,56,99,591.00₹
6 Additional Works - B 1,29,83,853.00₹
7 Electrical Works (LT Distribution) 1,68,27,404.00₹
Grand total 30,06,60,206.00₹
SUMMARY SHEET
:Construction of Balance Work for 1st Phase (B+G+IV) of Administrative Building of New Town Kolkata Development Authority at Plot No. DG/13, Premises No.04-3333, Action Area – 1D, New Town Kolkata
:DLI/CON/710/520
Sl. Item Description Quantity Unit Rate (Rs.) Amount (Rs.)
1 Surface Dressing of the ground in any kind of soil including removing vegetation
inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto
75 m as directed. 7007.00 sqm ₹ 6.45 45,195.15₹
2 Earth work in excavation of foundation trenches or drains, in all sorts of soil (including
mixed soil but excluding laterite or sandstone) including removing, spreading or
stacking the spoils within a lead of 75 m. as directed. The item includes necessary
trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out
water as required complete. -₹
2.1 Depth of excavation not exceeding 1,500 mm. 6159.34 % cum ₹ 9,221.30 5,67,971.59₹
2.2 Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but
not requiring shoring. 3039.69 % cum ₹ 14,873.51 4,52,109.19₹
2.3 Depth of excavation for additional depth beyond 3000 mm upto 4000 mm excluding
cost of shoring as necessary. 1778.47 % cum ₹ 18,145.41 3,22,710.67₹
2.4 Depth of excavation beyond 4000 mm upto 5500 mm 830.70 % cum ₹ 21,417.31 1,77,914.24₹
2.5 Depht of excavation beyond 5500 mm upto 7000 mm 0.00 % cum ₹ 24,689.21 -₹
3 Removal of rubbish, earth etc. from the working site & disposal of the same betond the
compound , in conformity with the Municipal/Corporation Rules for such disposal,
loading into truck & cleaning the site in all respect as per direction of E.I.C.13573.93 cum ₹ 158.38 21,49,838.88₹
4 Hire and labour charges for shoring work (including necessary close plank walling,
framing, Eucalyptus/Jhou bulla piling, strutting etc.) complete as per direction of
engineer-in-charge for foundation excavation (vertical surface are in contact with
supported earth is to be measured). 0.00 -₹
4.1 For basement work and depth upto 1.5 m 451.00 sqm ₹ 473.38 2,13,494.38₹
4.2 For basement work and depth beyond 1.5 m and upto 3 m 451.00 sqm ₹ 511.89 2,30,862.39₹
4.3 For basement work and depth beyond 3.00 m. 737.00 sqm ₹ 552.09 4,06,890.33₹
5 Filling in foundation or plinth by fine sand in layers not exceeding 150 as directed and
consolidating the same by thorough saturation with water ramming complete including
cost of supply of sand. Do- by fine sand0.00 % cum ₹ 80,311.38 -₹
6 Anti Termite treatment to bottom surface (in case of masonry foundation and
basement) and the sides (upto height of 300 mm from bottom) of the excavation
trenches with chemical emulsion by admixing chloropyrofos emulsifiable concentrates
(1% concentration) with water by weight @ 5 litres/sqm area. The work shall be carried
out as per specification described in 6.2.1 of code IS : 6313 (part II) 1981. (Mode of
measurement will be plan area of the foundation treated).
4835.00 sqm ₹ 86.99 4,20,596.65₹
7 Anti Termite treatment to bottom surface (in case of masonry foundation and
basement) and the sides (upto height of 300 mm from bottom) of the excavation
trenches with chemical emulsion by admixing chloropyrofos emulsifiable concentrates
(1% concentration) with water by weight @ 5 litres/sqm area. The work shall be carried
out as per specification described in 6.2.1 of code IS : 6313 (part II) 1981. (Mode of
measurement will be plan area of the foundation treated).
1262.00 sqm ₹ 126.88 1,60,122.56₹
8 Anti termite treatment to the top surface of consolidated earth within the plinth walls
with cheical emulsion by admixing chloropyrofos emulsifiable concentrates (1%
concentration) with water by weight @ 5 litres/sqm of the surface before sand bed or
sub-grade is laid. Holes upto 50 mm to 75 mm deep at 150 mm centre to centre of both
ways shall be made with 12 mm diameter mild steel rod on the surface to facilitate
saturations of the soil with the chemical emulsion. The works shall be carried out as
per the specification described in para 6.4 of code IS : 6313 (part-II) 1981. (Mode of
measurement will be per Sqm. of plan area of plinth treated).
4605.00 sqm ₹ 97.44 4,48,711.20₹
9 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five
layer 3 mm thick water proofing membrane, black finished reinforced with non-wooven
polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40
litre/sqm. by the same membrane manufacture of density at 25oC, 0.87-0.89 kg/litre
and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid
using Butane Torch and ceiling all joints etc, and preparing the surface complete. The
vital physical and chemical parameters of the membrane shall be as under : Joint
strength in longitudinal and transverse direction at 23oC as 650/450N/5cm. Softening
point of membrane not less than 150oC. Cold flexibility shall be upto -2oC when tested
in accordance with ASTM, D - 5147. The laying of membrane shall be got done
through authorized applicator of the manufacturer of membrane : 3mm thick
0.00 sqm ₹ 492.14 -₹
10 Applying two coats water proofing compound like tape crete mixed with cement water
as per manufacturer's specification & as per direction of E.I.C. 9732.00 Sqm ₹ 160.00 15,57,120.00₹
CIVIL WORKS
Sl. Item Description Quantity Unit Rate (Rs.) Amount (Rs.)
11 Providing RCC cast -In -Situ bored Pile in position as per specification in all kinds of
soil including cost of boring using drilling mud to stabilized the bore and flushing the
bore of exces mud with freshly prepared drilling fluid by using pumps prior to placing
concrete by tremie pipe in one continuous operation and including the cost of all
materials and labour for placing of concrete and also including cost of mobilisation and
hire charge of all equipments necessary for boring, welding of reinforement cage as
necessary and lowering of reinforement cage & steel liner (if any) , preparation and
placing of concrete complete but excluding the cost of reinforcement and labour for
bending and binding etc. but including the cost of concrete. Work to be executed as
per IS-2911 (part II- section 2)(cement concrete shuld have ultimate crushing strength
of not less than 300kg/ sqcm on 15 cm cube after 28 days. (Concrete will be paid
separately)
0.00 -₹
11.1 500 dia pile 0.00 Meter ₹ 1,771.00 -₹
11.2 600 dia pile 0.00 Meter ₹ 1,980.00 -₹
12 Extra above item no 11 above for supplying , fitting, fixing of MS casing Pipe around
RCC cast-in-Situ bored piles of different diameters in position including cost of all
materials, fabrication, handling etc. complete per direction of EIC."
6 mm thick casing for 500 / 600 mm. dia pile 0.00 M.T. ₹ 66,877.00 -₹
13 Performing lateral load test on two piles or two groups of piles by introducing a
hydraulic jack with gauge between two piles or pile groups under test by applying
horizontal loads in increments of about 20% of the estimated safe load at each stage
and applying the next increment after the rate of displacement is nearer to 0.1 mm. per
30 minutes till the total displacement becomes, 12 mm at the cut-off level including the
cost of arranging the entire set-up, hire charges of all implements including at least two
dial gauges, preparing the pile head if necessary, and removal of all arrangement after
completion of etc. complete in all respect as per direction of Engineer-in-charge and as
per IS specification.
a) Test between two piles. 0.00 Each ₹ 13,000.00 -₹
14 Performing Vertical Load Test (Compression) by hydraulic jack on pile/ piles with 1.5
times the design load including the preparation of the head of the piles with concrete of
required strength for receiving the jacks with all anciliary arranagement for setting up
gauge, construction of suitable platforms , keeping the loads and dismantling and
removing all arrangement etc. complete as per direction of engineer in charge including
cost of carriage of all material and as per IS specification
on single pile.
14.1 Testing load between 100MT to 150 MT. 0.00 Each ₹ 55,000.00 -₹
14.2 Testing load between 200MT to 250 MT. 0.00 Each ₹ 1,00,000.00 -₹
15 Cement concrete with graded stone ballast (40 mm size) excluding shuttering Pakur
variety in 1:3:6 proportion.
15.1 Basement 1.00 cum ₹ 4,438.60 4,438.60₹
15.2 Ground Floor 226.00 cum ₹ 4,376.78 9,89,152.28₹
15.3 First Floor 2.00 cum ₹ 4,438.60 8,877.20₹
15.4 Second Floor 2.00 cum ₹ 4,500.43 9,000.86₹
15.5 Third Floor 1.00 cum ₹ 4,562.25 4,562.25₹
15.6 Fourth Floor 2.00 cum ₹ 4,624.07 9,248.14₹
15.7 Fifth floor 1.00 cum ₹ 4,699.07 4,699.07₹
16 Cement concrete with graded stone ballast (40 mm size excluding shuttering) Pakur
Variety Stone 1:4:8 proportion
16.1 Basement 627.09 cum ₹ 4,070.79 25,52,735.42₹
16.2 Ground Floor 130.00 cum ₹ 4,008.96 5,21,164.80₹
16.3 First Floor 37.00 cum ₹ 4,070.79 1,50,619.23₹
16.4 Second Floor 35.00 cum ₹ 4,132.61 1,44,641.35₹
16.5 Third Floor 44.00 cum ₹ 4,194.44 1,84,555.36₹
16.6 Fourth Floor 44.00 cum ₹ 4,256.26 1,87,275.44₹
17 Ordinary Cement Concrete (mix 1:1.5:3) With graded stone chips ( 20mm nominal size)
excluding shuttering and reinforcemnet of any - with Pakur Variety (Surface drainage)34.00 cum ₹ 5,959.09 2,02,609.06₹
Sl. Item Description Quantity Unit Rate (Rs.) Amount (Rs.)
18 Batch Mixed concrete of M 30 Grade with well Graded stone chips of 20 mm nominal
size containing designed quantity of cement per Cu. M of Wet concrete produced in
computerised batching plant under controlled condition using approved super
plasticizer designing concrete mix following I.S 10262 and I.S. 456 transporting the mix
with agitation in transit mixer to work site depositing the mix on a platform erected for
the purpose at required level of concreting and then placing the mix in its final location
of form work compacting and curing the same complete as per specification and
direction of the Engineer-in charge including hire charges of computerised batching
plant, transit mixer with all accessories vibrators etc. inclusive of all other incidental
charges in this connection complete but excluding cost of hire charge of platform and
its supporting staging which would be paid through separate item. Consumption of
cement will not be less than 320 Kg of cement per cubic meter of controlled concrete
but actual consumption will be determined on the basis of preliminary test and job mix
foumula.Pakur variety (With Batching Plant, Transit mixer and approved concrete
pump)
18.1 Basement 0.00 cum ₹ 6,792.83 -₹
18.2 Ground Floor 0.00 cum ₹ 6,771.83 -₹
18.3 First Floor 0.00 cum ₹ 6,792.83 -₹
18.4 Second Floor 0.00 cum ₹ 6,813.83 -₹
18.5 Third Floor 0.00 cum ₹ 6,834.83 -₹
18.6 Fourth Floor 0.00 cum ₹ 6,855.83 -₹
18.7 Terrace 0.00 cum ₹ 6,876.83 -₹
19 Hire and labour charges for shuttering with centering and necessary staging upto 4 m
using approved stout props and thick hard wood planks of approved thickness with
required bracing for concrete slabs, beams and columns, lintels curved or straight
including fitting, fixing and striking out after completion of works (c) Steel shuttering or
9 to 12 mm thick approved quality ply board shuttering in any concrete work with
staging & (f) 25 mm to 30 mm shuttering without staging in foundation
19.1 Foundation without staging 1890.00 sqm ₹ 180.47 3,41,088.30₹
19.2 Basement 12928.55 sqm ₹ 347.73 44,95,644.00₹
19.3 Ground Floor 5027.00 sqm ₹ 335.69 16,87,513.63₹
19.4 First Floor 3963.00 sqm ₹ 347.73 13,78,053.99₹
19.5 Second Floor 3531.00 sqm ₹ 359.77 12,70,347.87₹
19.6 Third Floor 3405.00 sqm ₹ 371.81 12,66,013.05₹
19.7 Fourth Floor 3504.00 sqm ₹ 383.85 13,45,010.40₹
19.8 Terrace 680.00 sqm ₹ 395.90 2,69,212.00₹
20 Reinforcement for reinforced concrete work in all sorts of structures including
distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if
necessary), cutting to requisite length, hooking and bending to correct shape, placing
in proper position and binding with 16 gauge black annealed wire at every intersection,
complete as per drawing and direction- Tor Steel/ Mild
Steel
20.1 Basement 150.00 MT ₹ 60,080.40 90,12,060.00₹
20.2 Ground Floor 300.00 MT ₹ 59,762.00 1,79,28,600.00₹
20.3 First Floor 150.00 MT ₹ 60,080.40 90,12,060.00₹
20.4 Second Floor 150.00 MT ₹ 60,398.80 90,59,820.00₹
20.5 Third Floor 150.00 MT ₹ 60,717.20 91,07,580.00₹
20.6 Fourth Floor 150.00 MT ₹ 61,035.60 91,55,340.00₹
20.7 Terrace 150.00 MT ₹ 61,407.70 92,11,155.00₹
21 Supply only water proofing compound @ 3% by weight of cement and mixed with
cement plaster as in item 2 above. 6954.65 Kg ₹ 132.65 9,22,533.92₹
22 Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of
cement for M30 grade of concrete. 3260.00 Kg ₹ 132.65 4,32,439.00₹
23 Brick work with 1st class bricks in cement mortar (1:6)
23.1 In foundation and plinth 133.00 cum ₹ 5,248.95 6,98,110.35₹
23.2 In superstructure
23.3 Basement 49.77 cum ₹ 5,474.69 2,72,491.75₹
23.4 Ground floor 625.00 cum ₹ 5,404.35 33,77,718.75₹
23.5 First Floor 242.00 cum ₹ 5,474.69 13,24,874.98₹
23.6 Second Floor 218.00 cum ₹ 5,545.03 12,08,816.54₹
23.7 Third Floor 216.00 cum ₹ 5,615.37 12,12,919.92₹
23.8 Forth Floor 233.00 cum ₹ 5,685.71 13,24,770.43₹
23.9 Fifth Floor 141.00 cum ₹ 5,770.05 8,13,577.05₹
24 125 mm. thick brick work with 1st class bricks in cement mortar (1:4)
24.1 Basement 0.00 sqm ₹ 717.99 -₹
24.2 Ground floor 673.00 sqm ₹ 710.85 4,78,402.05₹
24.3 First Floor 688.00 sqm ₹ 717.99 4,93,977.12₹
24.4 Second Floor 708.00 sqm ₹ 725.13 5,13,392.04₹
24.5 Third Floor 556.00 sqm ₹ 732.27 4,07,142.12₹
24.6 Forth Floor 612.00 sqm ₹ 739.41 4,52,518.92₹
Sl. Item Description Quantity Unit Rate (Rs.) Amount (Rs.)
25 Extra for using approved HB netting in every third layer in any floor in 125mm. thick
brick work 1198.34 sqm ₹ 39.61 47,466.05₹
26 100 mm thick brick work with 1st class modular brick set in cement and sand mortar
(1:4) including raking out joints, puring scaffolding etc. complete in all respect in ground
floor with H.B. netting in every third layer. 337.00 sqm ₹ 570.15 1,92,140.55₹
27 Labour for chipping of concrete surface before taking up plastering work for Basement
Wall & Cover Slab. 34297.00 sqm ₹ 14.40 4,93,876.80₹
28 R.C. shelves/slab (1:1.5:3) either precast or cast in situ with stone chips and necessary
reinforcement upto 1% (0.8% main and 0.2% distribution bars), shuttering etc. and 10
mm. thick cement plaster (1:4) including neat cement finishing and cutting chase fitting
and fixing in position, mending good damages as necessary complete. In ground floor
(a) 50 mm. Thick panels
Ground Floor
78.00 sqm ₹ 921.58 71,883.24₹
29 Precast pierced jally work as per design and manufacturer specifications including
moulding etc with stone chips and necessary reinforcement shutteing complete
including fitting, fixing in position in all floors.
50 mm thick 43.00 sqm ₹ 353.74 15,210.82₹
30 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off
or chamfering corners as directed and raking out joints including throating, nosing and
drip course, scaffolding/staging where necessary
(Ground floor).
30.1 Internal Plaster
30.215mm thick plaster (1:3)
Basement Floor 12862.45 sqm ₹ 155.13 19,95,352.02₹
30.3 10mm thick plaster (1:4)
30.4 Basement floor 5334.00 sqm ₹ 107.81 5,75,058.54₹
30.5 Ground Floor 3979.00 sqm ₹ 105.36 4,19,227.44₹
30.6 1st Floor 2765.00 sqm ₹ 107.81 2,98,094.65₹
30.7 2nd Floor 2566.00 sqm ₹ 110.26 2,82,927.16₹
30.8 3rd Floor 2207.00 sqm ₹ 112.72 2,48,773.04₹
30.9 4th Floor 2300.00 sqm ₹ 115.17 2,64,891.00₹
30.10 5th Floor 2735.00 sqm ₹ 117.62 3,21,690.70₹
30.11 15mm thick plaster (1:4)
30.12 Ground Floor 40.00 sqm ₹ 135.75 5,430.00₹
30.13 1st Floor 10.00 sqm ₹ 138.20 1,382.00₹
30.14 2nd Floor 10.00 sqm ₹ 140.66 1,406.60₹
30.15 3rd Floor 10.00 sqm ₹ 143.11 1,431.10₹
30.16 4th Floor 10.00 sqm ₹ 145.56 1,455.60₹
30.17 15mm thick plaster (1:6)
30.18 Basement floor 720.63 sqm ₹ 118.75 85,575.29₹
30.19 Ground Floor 4810.00 sqm ₹ 116.29 5,59,354.90₹
30.2 1st Floor 2733.00 sqm ₹ 118.75 3,24,543.75₹
30.21 2nd Floor 2518.00 sqm ₹ 121.20 3,05,181.60₹
30.22 3rd Floor 2185.00 sqm ₹ 123.65 2,70,175.25₹
30.23 4th Floor 2473.00 sqm ₹ 126.10 3,11,845.30₹
30.24 5th Floor 463.00 sqm ₹ 128.54 59,514.02₹
30.25 External Plaster
30.26 20mm thick plaster (1:6)
30.27 Ground Floor 1556.00 sqm ₹ 137.23 2,13,529.88₹
30.28 First Floor 1019.00 sqm ₹ 140.17 1,42,833.23₹
30.29 Second Floor 1048.00 sqm ₹ 143.12 1,49,989.76₹
30.3 Third Floor 905.00 sqm ₹ 146.07 1,32,193.35₹
30.31 Fourth Floor 949.00 sqm ₹ 149.02 1,41,419.98₹
30.32 Fifth Floor 1110.00 sqm ₹ 152.46 1,69,230.60₹
30.33 15mm thick plaster (1:3)
30.34 Fifth Floor (Terrace) 10706.00 sqm ₹ 166.93 17,87,152.58₹
30.35 10mm thick plaster (1:4) over 20mm thick plaster
30.36 i) Ground Floor 1148.00 sqm ₹ 105.36 1,20,953.28₹
30.37 ii) First Floor 1019.00 sqm ₹ 108.31 1,10,367.89₹
30.38 iii)Second Floor 1048.00 sqm ₹ 111.25 1,16,590.00₹
30.39 iv)Third Floor 905.00 sqm ₹ 114.20 1,03,351.00₹
30.4 iv)Fourth Floor 949.00 sqm ₹ 117.15 1,11,175.35₹
30.41 iv)Fifth Floor 1110.00 sqm ₹ 120.10 1,33,311.00₹
31 Neat cement punning about 1.5 mm. thick in wall, dado, window sills, floor, drain etc.
(Cement 0.152 cu.m. per 100 sq.m. 1358.00 sqm ₹ 31.36 42,586.88₹
TOTAL = 12,12,28,872.00₹
Add 8.44% 1,02,31,717.00₹
TOTAL = 13,14,60,589.00₹
Add 0.4% 5,25,842.00₹
TOTAL = 13,19,86,431.00₹
Sl. Item Description Quantity Unit Rate (Rs.) Amount (Rs.)
32 Artificial stone in floor, dado, staircase etc with cement concrete (1 : 2 : 4) with stone
chips, laid in panels as directed with topping made with ordinary or white cement (as
necessary) and marble dust in proportion (1 : 2) including smooth finishing and
rounding off corners including raking out joints or roughening of concrete surface and
application of cement slurry before flooring works using cement @ 1.75 kg/sqm all
complete including all materials and labour.
3 mm thick topping (High polishing grinding on this item is not permitted with ordinary
cement) using grey cement.
32.1 35 mm thick
32.2 Basement floor 3980.00 Sqm ₹ 297.60 11,84,448.00₹
32.3 Ground Floor 959.00 Sqm ₹ 293.20 2,81,178.80₹
32.4 First Floor 67.00 Sqm ₹ 297.60 19,939.20₹
32.5 Second Floor 223.00 Sqm ₹ 301.99 67,343.77₹
32.6 Third Floor 67.00 Sqm ₹ 306.39 20,528.13₹
32.7 Fourth Floor 67.00 Sqm ₹ 310.79 20,822.93₹
32.8 Fifth floor 1187.00 Sqm ₹ 316.23 3,75,365.01₹
32.9 25 mm thick
Ground Floor 169.00 Sqm ₹ 236.56 39,978.64₹
33 Supplying dividing strips fitted and fixed with cement mortar (1:3) in mosaic or patent
stone floor, dado etc. complete as per dirction of EIC
Glass- 3mm thick
37 mm wide strip 6547.00 mtr ₹ 15.36 1,00,561.92₹
34 52 mm thick cement concrete flooring with concrete hardner topping , underlayer 40
mm thick concrete 1:2:4 (1 cement: 2course sand :4 graded stone aggregate 20 mm
nominal size) and top layer 12 mm thick cement hardner consisiting of mix 1:2 (1
cement hardner mix: 2 graded stone aggregate 6 mm nominal size ) by volume,
hardening compound mixed @ 2 lit/ 50 kg of cement or as per manufasturer's
specification. this includes cost of cement slurry, but excluding the cost of nosing of
steps etc. complete. (In pump room , blower room, )
142.00 Sqm ₹ 552.96 78,520.32₹
35 Supplying and laying true to line and level vitrified tiles of approved brand (size not less
than 600 mm x 600 mm x 10 mm thick) in floor, skriting etc. set in 20 mm sand cement
mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @2.91kg./M2
or using polymerised adhesive (6 mm thick layer applied directly over finished artificial
stone floor/Mosaic etc without any backing course) laid after application slurry using
1.75 kg of cement per M2 below mortar only, joints grouted with admixture of white
cement and colouring pigment to match with colour of tiles/epoxy grout materials of
approved make as directed and removal of wax coating of top surface of tiles with
warm water and polishing the tiles using soft and dry cloth upto mirror finish complete
including the cost of materials, labour and all other incidental charges complete true to
the manufacturer's specification and direction of Engineer-in-Charge. (White cement,
synthetic adhesive and grout material to be supplied by the contractor).
35.1 Basement 29.00 Sqm ₹ 1,080.00 31,320.00₹
35.2 Ground Floor 970.00 Sqm ₹ 1,075.00 10,42,750.00₹
35.3 First Floor 858.00 Sqm ₹ 1,080.00 9,26,640.00₹
35.4 Second Floor 693.00 Sqm ₹ 1,085.00 7,51,905.00₹
35.5 Third Floor 896.00 Sqm ₹ 1,090.00 9,76,640.00₹
35.6 Fourth Floor 934.00 Sqm ₹ 1,095.00 10,22,730.00₹
36 Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the
existing work & 4 nos. of key stones (10 mm) fixed with araldite at the back of each tile
& finishing the joints with white cement mixed with colouring oxide if requried to match
the colour of tiles including roughening of concrete surface, if necessary or by synthetic
adhesive & grout materials etc. (Domestic and fire tank in Basement)
36.1 Floor (Colour decorated) 459.00 sqm ₹ 711.71 3,26,674.89₹
36.2 Wall (Colour decorated) 999.00 sqm ₹ 724.93 7,24,205.07₹
37 Providing and fixing 10 mm thick acid and / or alkali resistant tiles of approved make
and colour using acid and or Alkaline resiting mortar bedding, joints , dado and skirting
filled with acid and or alkali resistant cement as per IS: 4457 , complete as per direction
of EIC. (Anti inflamable objects room)
37.1 In flooring on a bed of 10mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)
(11.21.1.1) Acid and alkali resistant tile
50.00 sqm ₹ 1,414.41 70,720.50₹
37.2 In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)
(11.21.2.1) Acid and alkali resistant tile
5.00 sqm ₹ 1,485.88 7,429.40₹
38 Supplying , fitting and fixing granite slab 15 -18 mm thick with unirorm testure and
without decorative vains in Floor , column, wall fascia etc. with 15 mm thick (avg)
cement mortar 1:2 including making suitable arrangement to hold stone properly by
brass/ copper hooks including pointing the cement mortar (1:2) (1 white cement :2
marble dust) with admixture of pigment matching the stone shed all complete as per
direction of EIC.(Using cement slurry at backside of granite @ 4.4 Kg / sqm and white
cement slurry for joint filling @ 1.8 Kg/ sqm) (Fire lift lobby, Main lift lobby in basement)
38.1 Basement 174.00 sqm ₹ 2,462.42 4,28,461.08₹
FLOORING AND PAINTING WORKS SECTION
Sl. Item Description Quantity Unit Rate (Rs.) Amount (Rs.)
38.2 Ground Floor 549.00 sqm ₹ 2,450.42 13,45,280.58₹
38.3 First Floor 229.00 sqm ₹ 2,462.42 5,63,894.18₹
38.4 Second Floor 193.00 sqm ₹ 2,474.42 4,77,563.06₹
38.5 Third Floor 193.00 sqm ₹ 2,486.42 4,79,879.06₹
38.6 Fourth Floor 193.00 sqm ₹ 2,498.42 4,82,195.06₹
39 Supplying fitting and fixing 18 to 22 mm thick kota stone slab set in 20 mm thick (Avg.)
cement mortar 1:4 in floor, stair and lobby including pointing in cement slurry with
admixture of pigment matching the stone shed including grinding and polishing as per
the direction of Engineer In Charge to macth with the existing work. (Slurry for bedding
@ 4.4 Kg/ sqm and pointing @ 2.0 Kg/ sqm)
39.1 Basement floor 93.00 sqm ₹ 975.01 90,675.93₹
39.2 Gound floor 129.00 sqm ₹ 963.01 1,24,228.29₹
39.3 First floor 67.00 sqm ₹ 975.01 65,325.67₹
39.4 Second floor 67.00 sqm ₹ 987.01 66,129.67₹
39.5 Third floor 67.00 sqm ₹ 999.01 66,933.67₹
39.6 Fourth floor 67.00 sqm ₹ 1,011.01 67,737.67₹
39.7 Fifth floor (Terrace) 12.00 sqm ₹ 1,023.01 12,276.12₹
40 Extra cost for labour for prefinished and premoulded nosing to tread of steps , railing,
window sill etc. of kota stone - In all floors. 501.00 M ₹ 139.21 69,744.21₹
41 Extra cost of labour for grinding kota stone in steps and riser of steps- In all floors.
279.00 sqm ₹ 130.32 36,359.28₹
42 Supplying, fitting and fixing 18 mm. to 22 mm. thick kota stone slab in wall, dado in 15
mm thick [avg] cement mortar (1:3) including making suitable arrangement to hold the
stone properly by brass / copper hooks including pointing in cement mortar (1:2) (1
cement : 2 marble dust) with admixture of pigments matching the stone shade,
including grinding and polishing all complete as per direction of Engineer-in-charge
including cost of materials, labour, scaffolding, staging,curing complete.
Using cement slurry for bedding @4.4 kg/Sq.m. and for jointing @1.8 kg/Sq.m.
42.1 Basement floor 13.00 sqm ₹ 1,068.21 13,886.73₹
42.2 Gound floor 17.00 sqm ₹ 1,056.21 17,955.57₹
42.3 Firsht floor 6.00 sqm ₹ 1,068.21 6,409.26₹
42.4 Second floor 6.00 sqm ₹ 1,080.21 6,481.26₹
42.5 Third floor 6.00 sqm ₹ 1,092.21 6,553.26₹
42.6 Fourth floor 6.00 sqm ₹ 1,104.21 6,625.26₹
42.7 Fifth floor (Terrace) 2.00 sqm ₹ 1,116.21 2,232.42₹
43 Supplying and fixing Tufted, multi-level loop pile (not printed) Type 6 or Type 6.6
Premium Solution Dyed Nylon Min. 20 Oz per sq yard or 680grams per sqm meter , fire
retardant loop pile broadloom carpet of SHAW CAPET or Equivalent make as per
manufacturer's specification upto the full satisfaction of Architect/ EIC (Conference
room 2nd floor) 157.00 sqm ₹ 1,100.00 1,72,700.00₹
44 Supplying and fixing Tufted, multi-level loop pile (not printed) Type 6 or Type 6.6
Premium Solution Dyed Nylon Min. 20 Oz per sq yard or 680grams per sqm meter , fire
retardant loop pile TILE carpet (Diffuse / Disparse) of SHAW CAPET or Equivalent
make as per manufacturer's specification upto the full satisfaction of Architect/ EIC
(Auditorium floor) 350.00 sqm ₹ 2,474.80 8,66,180.00₹
45 Providing and laying water proofing treatment to vertical and horizontal surface of
depressed portion of WC , kithcen and the like consisting of :
(i) 1 st course of applying cement slurry @ 4.4 kg/ sqm mixed with water proofing
compound consisting of IS 2645 in recommended proportion including rounding of
junction of vertical and horizontal surface.
(ii) 2nd course of 20 mm cement plaster 1:3 (1cement : 3 coarse sand) mixed with
water proofing compund in recommended proportion including rounding of junction of
vertical and horizontal surface.
(iii) 3rd course of applying blown or residulal bitumen applying hot at 1.7 kg/ sqm area.
iv) 4th course of 400 micron thick PVC sheet (overlapped at joint of PVC sheet should
be 100mm wide and pasted to each other with bitumin @ 1.7Kg / SQM).
All floor.
2663.00 sqm ₹ 525.47 13,99,326.61₹
46 Supplying and laying of approved make and brand of scratchproof , flexible and
homogeneous PVC vinyl flooring conforming to IS 3462 - 1982 in required finish fixed
with synthetic acrylic adhesive after preparing the floor levelling and smoothening when
necessary with suitable putty as per design and instruction of EIC.
2 mm thick (Plain).
66.00 sqm ₹ 430.18 28,391.88₹
47 Supplying and fixing in position of 8 mm thick wooden laminated flooring complete with
(size 1.22 mx 0.195m) including 2 mm thick foam under it by applying proper adhesive
for smooth surface - level with interlocking fixing of planks including skirting at wall
complete as per approved brand and make as directed by EIC.
284.00 sqm ₹ 4,328.57 12,29,313.88₹
48 Supplying of end profile in laminated wooden floorng for uniform and smooth edges
including fitting complete of flooring as per direction of EIC 148.00 Mtr ₹ 429.47 63,561.56₹
49 Finishing cement concrete surface even and smooth without using extra cement
6547.00 sqm ₹ 15.05 98,532.35₹
50 Spike rolling to surface or making impressions of expanded metal, whilst the concrete is
green 4488.00 sqm ₹ 4.83 21,677.04₹
89 Applying decorative cement based paint of approved quality after preparing the surface
including scrapping the same thoroughly (plasterd or concrete surface) as per
manufacture specification. Two coats.
Sl. Item Description Quantity Unit Rate (Rs.) Amount (Rs.)
89.1 Basement 4868.00 sqm ₹ 42.92 2,08,934.56₹
89.2 Ground Floor 4434.00 sqm ₹ 42.92 1,90,307.28₹
89.3 1st Floor 3529.00 sqm ₹ 42.92 1,51,464.68₹
89.4 2nd Floor 3245.00 sqm ₹ 42.92 1,39,275.40₹
89.5 3rd Floor 2815.00 sqm ₹ 42.92 1,20,819.80₹
89.6 4th Floor 2940.00 sqm ₹ 42.92 1,26,184.80₹
90 Applying interior grade Acrylic Primer of approved quality and brand on plastered or
concrete surface old or new surface to receive Distemper / Acrylic emulsion paint
including scraping and preparing the surface throughly, complete as per manufacturer's
specification and as per direction of the Engineer-in-Charge (In All Floor).
One Coat
Water based interior grade Acrylic Primer
31325.00 % sqm ₹ 2,748.82 8,61,067.87₹
91 Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling
including sand papering in intermediate coats including putty (to be done under specific
instruction of Superintending Engineer): (Two Coats)
Luxury Quality - In all floors 31325.00 sqm ₹ 60.76 19,03,307.00₹
92 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade
acrylic primer (as per manufacturer's specification) including cleaning and smoothning
of surface. (two coat) 2501.00 sqm ₹ 62.13 1,55,387.13₹
93 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or
concrete surface old or new surface to receive decorative textured (matt finish) or
smooth finish acrylic exterior emulsion paint including scraping and preparing the
surface thoroughly, complete as per manufacturer's specification and as per direction of
the EIC. (a) One Coat
93.1 Ground Floor 1148.00 % sqm ₹ 2,792.45 32,057.33₹
93.2 First Floor 1019.00 % sqm ₹ 2,856.81 29,110.89₹
93.3 Second Floor 1048.00 % sqm ₹ 2,921.16 30,613.76₹
93.4 Third Floor 905.00 % sqm ₹ 2,985.52 27,018.96₹
93.5 Fourth floor 949.00 % sqm ₹ 3,049.88 28,943.36₹
93.6 Fifth floor 1110.00 % sqm ₹ 3,127.33 34,713.36₹
94 Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per
manufacturers specifications and as per direction of EIC to be applied over Acrylic
primer as required. The rate includes costs of materials, labour, scaffolding and all
incidental charges but excluding the cost of primer (Two Coat) - Premium 100 % Acrylic
Emulsion
94.1 Ground Floor 1148.00 sqm ₹ 78.75 90,405.00₹
94.2 First Floor 1019.00 sqm ₹ 79.40 80,908.60₹
94.3 Second Floor 1048.00 sqm ₹ 80.05 83,892.40₹
94.4 Third Floor 905.00 sqm ₹ 80.70 73,033.50₹
94.5 Fourth floor 949.00 sqm ₹ 81.35 77,201.15₹
94.6 Fifth floor 1110.00 sqm ₹ 82.12 91,153.20₹
TOTAL 2,09,22,012.00₹
ADD 8.44% 17,65,818.00₹
TOTAL 2,26,87,830.00₹
ADD 0.40% 90,751.00₹
TOTAL 2,27,78,581.00₹
Sl. Item Description Quantity Unit Rate (Rs.) Amount (Rs.)
51 Woodwork in door and window frame fitted and fixed in position complete including a
pretective coat of painting at the contact surface of the frame excluding cost of concrete,
Iron Butt hinges and MS clamps (Malysian SAL)
51.1 Basement floor 1.00 cum ₹ 69,727.00 69,727.00₹
51.2 Ground Floor 2.00 cum ₹ 69,527.00 1,39,054.00₹
51.3 1st Floor 1.00 cum ₹ 69,727.00 69,727.00₹
51.4 2nd Floor 2.00 cum ₹ 69,727.00 1,39,454.00₹
51.5 3rd Floor 2.00 cum ₹ 69,727.00 1,39,454.00₹
51.6 4th Floor 2.00 cum ₹ 69,727.00 1,39,454.00₹
51.7 5th Floor 1.00 cum ₹ 69,777.00 69,777.00₹
52 Supplying, fitting & fixing M.S clamps for door & window frame made of flat bent bar, end
bifurcated with necessary screws etc. by cement concrete (1:2:4) as per direction (Cost
of concrete will be paid separately).
52.1 Flat Iron (40 mm x 6 mm, 200 mm long) : 931.00 Each ₹ 29.84 27,781.04₹
52.2 Flat Iron (40 mm x 6 mm, 125mm long) : 1248.00 Each ₹ 23.13 28,866.24₹
53 Cutting chase upto 125 x 150 mm and subsequent mending of damages.
In Brickwall 27.00 Mtr ₹ 77.36 2,088.72₹
54 Supplying solid flush type doors of commercial quality, the timber frame consisting of top
and bottom rails and side styles of well season timber 65 mm wide each and the entire
frame fitted with 37.5 mm wide battens faces both ways in order to make the door of
solid core and internal lipping with garjan or similar wood veneers using phenol
formaldehyde as glue etc. complete, including fitting, fixing, shutters in position but
excluding the cost of hinges and other fittings in ground floor.
35 mm thick shutters.
323.00 Sqm ₹ 2,447.64 7,90,587.72₹
55 Supplying and fitting 35mm thick Shutters of 1/3 panel and 2/3 glazed for Doors and
windows as pr design , each panel consisting of 12 mm thick plywood without joint and
ordinary glass of 7.4 kg per sqm 3mm thick fitted with putty bed teakwood bead and
nails including fitting and fixing shuitters in position but excluding the cost of glass putty
teak bead , nails, hinges etc. and other fitting in ground floor (at Fire Hydrant Duct ) upto
the full satisfaction of EIC.
Ordinary teak 20.00 Sqm ₹ 3,931.07 78,621.40₹
56 Supplying, fitting & fixing fibre reinforced polymer (F.R.P) composite door frame as per
approved section with glass fibre reinforced plastic moulded skins and a special
sandwich core, so as to impart monolitaheic composite structure as per approved
technology of department of science and technology (DST) to satisfy IS : 4020 door
testing performance criteria. all complte as per direction of EIC.
Frame size = 66 x 90 mm (Door D1A) 64.00 Mtr ₹ 571.93 36,603.52₹
57 Supplying, fitting & fixing fibre reinforced polymer (F.R.P) composite door shutters as
per approved design with glass fibre reinforced plastic moulded skin and a special
sandwich core, so as to impart monolithic composite structure as per approved
technology of DST to satisfy IS 4020 door testing performance criteria as specified in
PWD- SOR. (Shutter 32 mm thick)
Door D1A 17.00 Sqm ₹ 3,200.48 54,408.16₹
58 Providing and fixing fire resistant door frame of section 143 x 57 mm having built in
revet made out of 16 SWG GI sheet (Zinc Coating) less than 120 gm / sqm duly filled
with vermiculite based concrete mix suitable for mounting 60 mins fire rated door
shutters. The frame is fitted with intumuscent fire seal strip of size 10x 4 mm (Min)
around the frame and fixing with dash fastener of approved size and make including
allying a coat of approved brand fire resistant primer complete as per direction of EIC
639.00 Mtr ₹ 1,527.31 9,75,951.09₹
59 Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 mins fire rating
conforming to IS 3614 (Part II) tested and certified as per laboratory approved by EIC
with suitable mounting on door frame consisting of vertical styles , lock rail, top rail 100
mm wide, bottom rail 200 mm wide made out of 60 SWG GI sheet (Zinc Coating not less
than 120 gm / sqm ) duly filled FR insulation mateial and fixin with necessary Stainless
steel bearing hinge of approved make includinhg applying a coat of approved fire
resistant primer etc. all complete as per direction of EIC
341.00 Sqm ₹ 7,531.27 25,68,163.07₹
60 Providing and fixing panic bar/Latch (Double point) fitted with a single body , trim latch
and lock on back side of the panic latch of reputed brand and manufactured to be
approved by EIC all complete. 114.00 Nos ₹ 7,723.32 8,80,458.48₹
WOOD WORK & ALLUMINIUM & GROUND IMPROVEMENT WORK
Sl. Item Description Quantity Unit Rate (Rs.) Amount (Rs.)
61 Supplying, fiitting & fixing steel rolling shutter profile type with 18 BG of approved type
steel latche section 75 mm wide, fitted with coil wire spring to necessitate the fitting of
required number of CI Police on heavy type solid drawn seamness steel tube complete
with locking arrangement both inside and outside specially built up side guide channels
including providing a hood for the steel rolling shutter in the room, painting two coats of
approved aluminium paint over a coat of red lead primer complete.
68.00 Sqm ₹ 3,020.13 2,05,368.84₹
62 Supplying, fiitting & fixing steel rolling grill link type with 18 BG of approved type steel
latche section 75 mm wide, fitted with coil wire spring to necessitate the fitting of
required number of CI Police on heavy type solid drawn seamness steel tube complete
with locking arrangement both inside and outside specially built up side guide channels
including providing a hood for the steel rolling shutter in the room, painting two coats of
approved aluminium paint over a coat of red lead primer complete.
26.00 Sqm ₹ 3,925.97 1,02,075.22₹
63 Supplying and fixing Anodized aluminium butt hinges of approved quality manufacture
from extruded section conforming to IS specification (IS 205/66) and fitted and fixed with
cadmium plated screws.
Hinge size (100 x 63 x 3.20) 557.00 Each ₹ 69.92 38,945.44₹
64 Supplying and fixing double acting iron spring hinges of approved quality fitted and fixed
complete.
150mm size. 14.00 Each ₹ 358.52 5,019.28₹
65 Anodized aluminium D type handle of approved quality manufactured from extruded
section conforming to IS specification (IS : 230/72) fitted and fixed complete with
continuous plate base.
125 mm grip x 10 mm dia. rod. 409.00 Each ₹ 94.87 38,801.83₹
66 Anodized aluminium barrel / tower / socket bolt (full covered) of approved manufacture
from extruded section conforming to IS : 204/74 fitted and fixed with cadmium plated
screws.
Bolt Size (200 mm long x 10 mm dia board) 325.00 Each ₹ 84.26 27,384.50₹
67 Anodized aluminium Aldrop / sliding bolts of approved quality manufactured from
extruded section conforming to IS specification (IS : 2681/66) fitted and fixed complete.
250 x 16 mm dia bolt.
93.00 Each ₹ 246.34 22,909.62₹
68 Supplying best quality Indian sheet glass panes set in putty (as per IS specification ) and
fitted and fixed with teak wood beads and nails complte ( in all floors for internal walls &
upto 6m height for external wall).
4mm thick. 14.00 Sqm ₹ 881.63 12,342.82₹
69 Wood work in hand rails of staircase, balcony etc. including necessary bend, moulding
fitted and fixed complete. a) First class best Indian Teak 0.00
69.1 Upto 4th floor 1.00 Cum ₹ 1,79,789.44 1,79,789.44₹
69.2 Above 4th floor 0.03 Cum ₹ 1,79,839.44 5,395.18₹
70 Chamfers, splays, grooves, rebates, rounded angles, rounded nosings, toungued and
grooved edges (each tongue and each groove measured) etc., exc 3mm but n.exc
75mm girth on softwood. 155.90
Rmt /
Cm
width ₹ 3.69 575.27₹
71 Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension
system (E-Grid T 2430 or equivalent load carrying capacity with mid span deflection not
exceeding 1/360 span with hanger spacing of 1200mm c/c consisting of Main Runner
3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The wall Angle shall
be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with
distance 300mm c/c. The Main Runners to be placed @ 1200mm. The Cross Tee
1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600
mm to form a modular grid of 1200mm x 600mm. Additional cross Tees of 600 mm shall
be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm
x 600 mm. Grid of module size 600 mm x 600 mm shall be supported by 6 mm dia G.I.
wire from purlins/soffit. 6 mm thick High Pressure Steam Cured Non Asbestos Fibre
Cement Standard Ceiling Board (Density > 1300 kg/m3) of size 595 mm x 595 mm,
conforming IS 14862 & Type B Category III of ISO 8336, tested as per AS-1530
part 3 & BS-476 Part 4,5,6,7 & 8 should be placed in the Grid module to form a False
Ceiling. All complete as per the drawing & direction of Engineer in-Charge.
False Ceiling (with 6 mm thick Fibre Cement Designer Board and E-Grid T-2430).
71.1 Ground Floor 580.00 sqm ₹ 743.80 4,31,404.00₹
71.2 First Floor 1064.00 sqm ₹ 752.73 8,00,904.72₹
71.3 Second Floor 868.00 sqm ₹ 761.66 6,61,120.88₹
71.4 Third Floor 889.00 sqm ₹ 770.59 6,85,054.51₹
71.5 Fourth Floor 956.00 sqm ₹ 779.52 7,45,221.12₹
Sl. Item Description Quantity Unit Rate (Rs.) Amount (Rs.)
72 Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension
system (E-Grid T 2430 or equivalent load carrying capacity with mid span deflection not
exceeding 1/360 span with hanger spacing of 1200mm c/c consisting of Main Runner
3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The wall Angle shall
be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with
distance 300mm c/c. The Main Runners to be placed @ 1200mm. The Cross Tee
1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600
mm to form a modular grid of 1200mm x 600mm. Additional cross Tees of 600 mm shall
be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm
x 600 mm. Grid of module size 600 mm x 600 mm shall be supported by 6 mm dia G.I.
wire from purlins/soffit. 6 mm thick High Pressure Steam Cured Non Asbestos Fibre
Cement Standard Ceiling Board (Density > 1300 kg/m3) of size 595 mm x 595 mm,
conforming IS 14862 & Type B Category III of ISO 8336, tested as per AS-1530
Acoustic False Ceiling (with 15mm thick OW Acoustic Board and E-Grid U-1520).
0.00
72.1 Ground Floor 324.00 sqm ₹ 1,320.63 4,27,884.12₹
72.2 First Floor 157.00 sqm ₹ 1,329.56 2,08,740.92₹
73 Perforated particle board/tiles for insula-tion and accoustic purposes,60x60 cm in size,
fixed with nails to timber frameworkorwith staples on snap grid (16 mm thick)
172.00 sqm ₹ 535.62 92,126.64₹
74 Providing fixing thermal insulation of wall (under deck insulation) with Resin Bonded
Fibre glass wool conforming to IS : 8183, density 24kg / m3, 50mm thick, wrapped in
200 G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm
and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building. (As in
Wall lining) 271.00 sqm ₹ 567.69 1,53,843.99₹
75 Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers
on one face; fixed with screws to timber frame work. 12mm thick 2142.00 sqm ₹ 813.52 17,42,559.84₹
76 Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or
brads.M&L
2nd class hardwood (Exc 13 & n. exc 25 sqcm)
6773.00 Mtr. ₹ 96.99 6,56,913.27₹
77 Ditto, but bullnosed, splayed, chamfered or rounded on one edge or face, M&L 0.00
77.1 2nd class hardwood (Exc 3 & n. exc 6 sqcm) 50.00 Mtr. ₹ 48.28 2,414.00₹
77.2 2nd class hardwood (Exc 6 & n. exc 13 sqcm) 1730.00 Mtr. ₹ 90.17 1,55,994.10₹
79 Supplyig and installing of Modular Type Urinal Division Plate of Merino BESCO (MODLE
TYPE - UMP SERIES)or Equivalent make as per manufacturer's specification with 12
mm thick compact laminate 500mm (W) X 1200 mm(H) , overall height 1850 mm
(Including bottom Gap of 650mm) with all necessary hardwares and fixtures all
complete as per direction of EIC. 21 Nos ₹ 3,458.44 72,627.24₹
80 M.S. works as in framed gratings of window etc. made of round or square bars & frame
work or M.S. flat (with the bars securely fixed to the flat bar frame) with or without
intermediate flat bar stiffeners and fixed with necessary screws etc. complete as
directed. (For Stair case etc.)
80.1 Basement Floor 5.00 Qntl. ₹ 6,214.55 31,072.75₹
80.2 Gound floor 4.00 Qntl. ₹ 6,153.02 24,612.08₹
80.3 First floor 4.00 Qntl. ₹ 6,214.55 24,858.20₹
80.4 Second floor 4.00 Qntl. ₹ 6,276.08 25,104.32₹
80.5 Third floor 4.00 Qntl. ₹ 6,337.61 25,350.44₹
80.6 Fourth floor 4.00 Qntl. ₹ 6,399.14 25,596.56₹
80.7 Fifth floor 1.00 Qntl. ₹ 6,476.05 6,476.05₹
81 M.S. gate of jail type as per approved design made of strong M.S frame work,
intermediate stiffners and round / square bars or angels. M.S. sheet (not less than 14
gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and
hanging arrangements, fitting and fixing complete as per direction of EIC. In ground
floor. 6.67 Qntl ₹ 7,761.43 51,768.74₹
82 Rendering the surface of walls and ceiling with white cement based wall putty of
approved make and brand (1.5 mm thick). 33826.00 Sqm ₹ 77.34 26,16,102.84₹
83 Priming one coat on timber or plaster surface with syntehtic oil bound primer of approved
quality including smoothening surface by sand papering etc. 9499.00 Sqm ₹ 30.65 2,91,144.35₹
84 Priming One coat on steel or other metal surface in systhetic oil bound primer of
approved quality including smoothening surface by sand papering etc. 364.00 Sqm ₹ 24.98 9,092.72₹
85 Painting with best quality synthetic enamel paint of approved make and brand including
smoothening surface by sandpapering etc. on the surface if necessary all complete.
With super high gloss.( False ceiling)
On timber or plastered surface :
85.1 Two coats( white in shade) 4834.00 Sqm ₹ 62.50 3,02,125.00₹
85.2 Two coats (With any shade except White) 1845.00 Sqm ₹ 67.63 1,24,777.35₹
Sl. Item Description Quantity Unit Rate (Rs.) Amount (Rs.)
86 Painting with best quality synthetic enamel paint (two coats) of approved make and
brand including smoothening surface by sand papering etc. including using of approved
putty etc. on the surface, if necessary.
On steel or other metal surface With super gloss (Hi-gloss)
Two coats (with any shade except white). 377.00 Sqm ₹ 64.79 24,425.83₹
87 French polishing to wood work including preparing surface with high gloss polish on new
wood work. 39.00 Sqm ₹ 370.11 14,434.29₹
88 White wash including cleaning and smoothening surface thoroughly.
Three coats 1964.00
%
sqm ₹ 1,392.95 27,357.54₹
78 Supplyig and installing of Modular Type Restroom cubicles of Merino BESCO (MODLE
TYPE - ZMS NYLON SERIES)or Equivalent make as per manufacturer's specification
with 12 mm thick compact laminate size of cubicle 1200 x 1550 x 2003 (or as per
drawing) including bottom gap of 150 mm with all necessary hardwares and fixtures
Nylon privacy thumb turn , Nylon Hooks, Locks, Door Knob etc. all complete as per
direction of EIC.
78.1 L type Cubicles 31 Nos ₹ 25,618.08 7,94,160.48₹
78.2 I tpe cubicles 20 Nos ₹ 23,696.72 4,73,934.40₹
95 Suppying profile of required section made of aluminium aloy extrusion conforming to IS
732-983 and IS 1285-1975 Annodized (with required film thickness and specified colour /
natural) matt finished conforming to IS 1868 -1983 for fabrication of composite door ,
sliding and casement window, partitions, fomed of basic section of any ISI embossed /
certified make and brand as per direction of engineer in charge. (Payment will be made
on finished length of work)
(10-12 micron thickness annodizing film)
95.1 2- track sliding window
95.2 Bottom frame 29.00 Mtr. ₹ 254.52 7,381.08₹
95.3 Top and side frame 66.00 Mtr. ₹ 227.25 14,998.50₹
95.2 3- track sliding window
95.3 Bottom frame 37.00 Mtr. ₹ 362.59 13,415.83₹
95.4 Top and side frame 202.00 Mtr. ₹ 314.11 63,450.22₹
95.5 Shutter for all track sliding window
95.6 Bottom and Top Member 85.00 Mtr. ₹ 137.36 11,675.60₹
95.7 Style side 104.00 Mtr. ₹ 139.38 14,495.52₹
95.8 Interlock member 104.00 Mtr. ₹ 173.72 18,066.88₹
95.9 Casement window (40mm depth series)
95.10 Outer frame 652.00 Mtr. ₹ 182.81 1,19,192.12₹
95.11 Intermidiate Mullion 263.00 Mtr. ₹ 260.58 68,532.54₹
95.12 Z section (Shutter) 465.00 Mtr. ₹ 180.79 84,067.35₹
95.13 Glazing Clip 1161.00 Mtr. ₹ 48.48 56,285.28₹
95.14 Cleat Angle 63.00 Mtr. ₹ 311.08 19,598.04₹
95.15 Fixed Glazing
Glazing clip 174.00 Mtr. ₹ 49.49 8,611.26₹
96 Supplying bubble free float glass of approved make and brand conforming to IS 2835-
1987.
8 mm thick coloured / tinted/ smoked glass. 373.00 sqm ₹ 1,060.80 3,95,678.40₹
97 Labour only glazed aluminium windows made of extruded and annodized alloy
aluminium section fabrication, including cutting to proper shape and size , drilling and
aligning of window shutter, frame fitted with inbuilt locking arrangement, sliding rollers
and other necessary fittings , fixtures , adhesive and joineries along with extruded
neoprine or EPDM gasketing in between window frame and masonry wall (walls,
columns, beam, lintel etc.) as well as between glass and shutter frame for fixing glass
and polysulphate sealant and in between sutter and window frame where necessary
including cutting to requisite size and fixing glass as per drawing , specification, and
direction of EIC.
The rate includes the hire charge of all tools and plants, including all incidental charges,
adhesive, joineries such as screw , cleate angle etc. but excluded the cost of extruded
aluminum section, glass, neoprene / EPDM gasketting , locking arrangement and rollers.
97.1 2 track sliding window 19.00 sqm ₹ 518.95 9,860.05₹
97.2 3 track sliding window 55.00 sqm ₹ 706.16 38,838.80₹
97.3 openable / casement window 84.00 sqm ₹ 839.70 70,534.80₹
97.4 Fixed glazing 187.00 sqm ₹ 575.94 1,07,700.78₹
98 Supplying PVC roller for sliding window as per direction of Ingineer in charge 194.00 Each ₹ 14.44 2,801.36₹
99 Supplying EPDM gaskete of approved make and brand as per direction of Engineer - in -
charge 1197.00 Mtr. ₹ 14.42 17,260.74₹
100 Supplying annodized aluminium extruded section box hinges top hung windows as per
approved brand and make directed by EIC 319.00 Each ₹ 43.23 13,790.37₹
Sl. Item Description Quantity Unit Rate (Rs.) Amount (Rs.)
101 Supplying 250 mm long aluminium window peg stay / friction stay of top hung windows
as per approved brand and make directed by EIC 319.00 Each ₹ 62.52 19,943.88₹
102 Supplying and fixing of Maruti lock / concealed lock for sliding window (100mm) 97.00 Pair ₹ 55.25 5,359.25₹
103 Supplying and fixing of heavy duty Aluminium Handle (EBCO type) for top hung
windows 160.00 Each ₹ 69.69 11,150.40₹
104 Designing, supplying, fabricating and erecting in position of DGU one way reflective
glass 6mm thick toughened + 12 mm Air Gap + 5 mm clear toughened in combination
of either blue and grey or light grey and dark grey. The system should be designed to
with stand the wind pressure of 210 kg/sq.mtr confirming to IS -875 part III (the system
must pass the proof test at 1.5 times design wind pressure i.e.315 kg/sq.mtr). All visible
aluminium finish shall be super durable Anodised finish . Non visible aluminium shall be
minimum with chromatised treatment. The system design shall include pressure
equalization, three barrier gasket, drainage at all panel position, spandrel panel pressure
release & condensation drainage, to accommodate building movements, thermal
expansions and the seismic movements, fire seal etc. All metal joints in the wet area
shall be small joint sealant applied to ensure water tightness. The system shall be
designed to accommodate & provision for the openable vents where ever required. The
system shall be tested to performance as per specification including all material tests.
The quote rate shall include all design, engineering & shop drawing approval from
architect.
556.00 sqm ₹ 6,544.51 36,38,747.56₹
105 Supply and installation of fixed partition glazing and door with DORMA XL -C make
Stainless Steel Patch Fttings with 12 mm thick toughned clear glass of approved
specification with Aluminium C- Channel, sealant for gap filling ect. Complete with all
nececessry fittings all as shown in drawing . 137.00 sqm ₹ 8,019.18 10,98,627.66₹
106 Designing, supplying, fabricating and erecting in position, point fix glazed wall with 12mm
toughened clear glass of standard make .The system should be supported with
Stainless Steel " U"/T/I/C Iron section as required fixed at suitable possition. The entire
glazed wall will be flush on the level and SS Spider fittings of " RODAN" Dorma or
equivalent which confirm 304 grade .The shapes of Spiders in X or H for different
visual impact.All holes in the glass shall be drilled in cone shape .The system is also
supported with glass fins upto suitable heights from top level / ceiling level wherever
requirred. All the stainless steel fixture, Routels 304 grade with life time warranty. All the
anchoring shall be HILTI/ FISHER / CANON grouting system with RCC. All the glass
expansion joints to be sealed with clear UV proof structural silicon sealent. All the gaps
between glass and the RCC members to be sealed weather sealent. The cost includes
all labour, materials, bolts and nuts, tools, tackles, lift, equipments, transportation, etc
complete.
93.00 sqm ₹ 14,531.40 13,51,420.20₹
107 Supplying fabrication and fixing of Colour Annodized (15-18 Micron) Aluminium louver
with louver blade with necessary hardware as per drawing all complete upto the full
satisfaction of Engineer In Charge 364.00 sqm ₹ 4,843.80 17,63,143.20₹
108 Providing and fixing 4mm thick ACP CLADDING with approved make & shade of
aluminium composite panels consisting of a core of polyethylene sandwiched between
two aluminium skins of 0.5mm thickness with a mild edges with surface finish of
fluorocarbon protective colour coating as approved including cost of stainless steel
screws, bolts and aluminium framework behind, M.S. Galvanized brackets including
making necessary framework for installation complete as per design, elevation and
drawings enclosed. The periphery and the ACP panels joints vertical / horizontal shall be
sealed with silicone weather sealant of approved make & shade to make the ACP
cladding watertight / airtight. The rates shall include sealing of ACP panels to the
structure as detailed in drawings enclosed
The anchoring / bracing of the cladding to the RCC slab / beams / columns shall be
done with non-corrosive galvanised brackets of approved design, (Galvanizing to be
done conforming to IS:4759-1996 upto 610 gms. (80-90 micron thickness ) as per
proposed sketch enclosed (design of brackets to be submitted for approval ) and
including providing PVC spacers between the aluminium member and Including
providing and fixing of aluminium shims of various thickness to adjust the level
variations. the SS dash fasteners shall be provide with minimum anchoring depth of 50-
80 mm in the concrete and to withstand the dead load of the wall cladding as well as
stresses due to wind pressure etc. The entire cladding work shall be aligned for the full
height and for the full width by lazer beam equipment to ensure 100 percent 'X' axis
'Y'axis alignment.
79.00 sqm ₹ 2,820.17 2,22,793.43₹
Sl. Item Description Quantity Unit Rate (Rs.) Amount (Rs.)
109 Design,Fabrication,Supply and Installation of Pyramid Structure for Cover shed over
Light-Well , Atrium Cover with 10mm Thick Multiwall Clear UV Grade Polycarbonate
Sheet GE Lexan and equivalant as per approved drawing, fixed to specially extruded
aluminium section of bottom plate and top cover to ensure ingress of water, airtight
sealed including displacements due to wind or other loading; including required fixtures
and fittings ,HILTI/ CFS make anchor fasteners / hooks, required flashings / trims,
jointing and sealing with approved silicon sealant etc. all complete to the entire
satisfaction of Engineers. Supply & Fabrication of M.S. Structure , Truss etc. with epoxy
paint with necessary base plate, anchor fastener and other related hardware, complete
with all labour and two coat of primer finish for making main structure.
413.00 sqm ₹ 8,815.72 36,40,892.36₹
110 Arch Brand Stainless Steel AISI 304 Grade Handrail & Balustrade system Design -
ABT221-1-193 comprises 40 X 40 mm square baluster with Base plase + cover plate for
mounting on floor with bolts and anchor fasteners, connectors to be mounted for 19 mm
dia X 3 nos Horizontal pipe members on equal intervals on balusters . Mounting of
connectors to baluster with screw and allen key fixing system. Top S.S. Neck with shoe
on the top of baluster to mount 38 mm dia handrail. S.S. 202 Grade bushing is provided
on every joint of horizontal pipe member and handrail and Jointing of Handrail and
Horizontal members with stud and allen key. Entire system knock down and no welding
is done at site. Total height of railing 900 mm upto tpo of the handrail.
153.00 Mtr. ₹ 9,840.00 15,05,520.00₹
111 Arch Brand Stainless Steel AISI 304 Grade Handrail & Balustrade system Design -
ABT241-2-G10, comprises 40 X 40 mm square baluster with Base plase + cover plate
for mounting on floor with bolts and anchor fasteners, 2 Nos. connectors with end cap
(buttons) to be mounted for 10 mm thk toughened glass on balusters . Mounting of
connectors to baluster with screws and allen key fixing system. Top S.S. Arm with shoe
on the top of baluster to mount 38 mm dia handrail. S.S. 202 grade bushing is provided
on every joint of horizontal pipe member and handrail, and Jointing of Handrail and
Horizontal members with stud and allen key. Entire system knock down and no welding
is done at site. Total height of railing 900 mm upto tpo of the handrail.
281.00 Mtr. ₹ 12,300.00 34,56,300.00₹
112 Preparation of land including mixing of necessary fertilizer & cow-dung & making suitable
for gardening purpose 2138.00 sqm ₹ 6.50 13,897.00₹
113 Supplying & providing following layers for lawn & Tree Box including cost of all labour,
materials lead etc. complete. 0.00 -₹
113.1 Supply & laying of 20mm. Th. Drain cell 672.00 sqm ₹ 800.00 5,37,600.00₹
113.2 Supply & laying of Geotextile net of 250Sqm. 672.00 sqm ₹ 120.00 80,640.00₹
114 Making lawn with chinese/mexican grass(turfing) including supplying the grass with earth
& making soil as required to make lawn including all materials & labour complete.
2138.00 sqm ₹ 195.00 4,16,910.00₹
115 Earthwork in filling in compound tank, low land, ditches etc. with good earth in layers not
exceeding 150mm. Including breaking clods & consolidating the same by ramming &
dressing complete..
With carried earth arranged by the contractor with in a radiud of 3km. including cost of
carried earth. 891.00 %m3
₹ 36,365.81 3,24,019.37₹
116 Supplying and laying interlocking designer paver block of any shade and of approved
quality as per IS : 1237 - 1980 laid in patern as directed in pavement, footpath, driveway
etc. including necessary underlay complete in all respect with all labour and materials.
60 mm thick block (over 50 mm sand bed including cost of sand but excluding cost of
earthwork in excavation or dismantling of existing earth surface if necessary.
2732.00 sqm ₹ 1,252.05 34,20,600.60₹
117 Rolling sub-grade by power roller in all sorts of soil to proper camber and grade including
watering as per direction and satisfaction of Engineer-in-charge. 1558.00 sqm ₹ 1.80 2,804.40₹
Sl. Item Description Quantity Unit Rate (Rs.) Amount (Rs.)
118 Labour for spreading and consolidating stone metals of specific size in hard crast to
requisite thickness (measured after compaction) in layers including streaming of bats /
metals etc. as necessary, spreading manually or with the help of motor grader,
sweeping, watering and rolling in stages with power roller to proper line, grade and
camber spreading and sweeping requisite type and quantity of screening materials to fill
up the interstices of coarse aggregate, applying, binding materials as directed including
lighting, guarding and barricading and making necessary earthen bundh of one metre
with on each side where necessary to protect edges and preparing the bed by necessary
cutting or filling and rolling all complete including cost of all materials and hire and labour
charges of all man and machineries and as per specification and direction of Engineer-in-
charge but excluding the cost of stone metals.
(a) With cosrse aggregates size range 90-45 mm (Grading - I) Type - A Screening for
100 mm compacted thickness.
(i) Using manual means : For 300 mm compact thickness = 3 times of 100 mm compact
thickness area 3 x 965.76 =
4674.00 sqm ₹ 21.30 99,556.20₹
119 Supplying of stone aggregates (90 to 45 mm) of Pakur (Grade - I) including carriage
loading and unloading at site.(Barasat railway yards) 482.00 cum ₹ 1,069.00 5,15,258.00₹
120 Providing double gathered guilotine type (upward rise) synthetic satin / velvate front
curtain complete with front frills, electrical operating mechanism along with limit switches
1 Job ₹ 2,25,000.00 2,25,000.00₹
121 Providing 62 mm X 40 mm Al. box bar for batten & frill with 100 mm dia. 1 way, 2 way, 3
way pulleys properly fixed on grid structures with 10mm dia polypropylene rope fully
motorized 10 Nos. ₹ 20,000.00 2,00,000.00₹
122 Providing wing mechanism with cloth legs complete with travelling arrangement and
1.5m box and satin black markin cloth. 8 Sets ₹ 12,000.00 96,000.00₹
123 Providing lighting bars with 38 mm nb. Medium MS black pipe alongwith motorized
mechanism fully motorized. 4 Sets ₹ 20,000.00 80,000.00₹
124 Providing frills of black markin cloth for masking 5 Sets ₹ 9,000.00 45,000.00₹
125 Providing black curtain complete with motorised mechanism and cloth. 2 Sets ₹ 1,25,000.00 2,50,000.00₹
126 Providing Cyclorama screen with frame structure (usable for projection). 1 Job ₹ 1,45,000.00 1,45,000.00₹
127 Providing stage top grid structure and catwalk with 50 mm dia. MS black
pipe/rectangular section fitted from front to back over 40 mm dia pipe / rectangular
section held from the existing RCC structure and 50x50x6 MS angle & 25 mm thick
wooden gangway. 1 Job ₹ 4,00,000.00 4,00,000.00₹
128 Providing stage flooring with 1800 x 150 x 40 mm seasoned hollock /gamar wood planks
on 100 x 75 mm teak wood runners complete with waxing. 46.00 Sqm. ₹ 4,000.00 1,84,000.00₹
129 900mm wide wooden steps from auditorium level to stage. 2 Job ₹ 5,000.00 10,000.00₹
130 Expansion joint in floor, roof etc. formed with V strips made of 22.5cm wide strips of 24
gauge aluminium sheets with anchor arm projecting on each side (and end turned)
embedded in adjacent cement concrete including shaping and finishing the edge on
either side of the joint including the cost of bituminious filler complete as per direction.373.00 Mtr ₹ 348.52 1,29,997.96₹
TOTAL 4,36,24,404.00₹
ADD 8.44% 36,81,900.00₹
TOTAL 4,73,06,304.00₹
ADD 0.40% 1,89,225.00₹
TOTAL 4,74,95,529.00₹
TOTAL =
Sl. Item Description Quantity Unit Rate (Rs.) Amount (Rs.)
131 PART -B : Sanitary & Plumbing Works
Supplying,fitting and fixing G.I. pipes of TATA make with all necessary accessories,
specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket,
reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes,
making threads, fitting, fixing etc. complete in all respect including cost of all necessary
fittings as required,jointing materials and two coats of painting with approved paint in any
position above ground. (Payment will be made on the centre line measurements of total
pipe line including all specials. No separate payment will be made for accesories,
specials. Payment for painting will be made separately.)
131.1 Exposed on wall
131.2 15 mm dia. medium quality 25.00 M. ₹ 194.00 4,850.00₹
131.3 20 mm dia. medium quality 80.00 M. ₹ 221.00 17,680.00₹
131.4 25 mm dia. medium quality 140.00 M. ₹ 300.00 42,000.00₹
131.5 32 mm dia. medium quality 23.00 M. ₹ 343.00 7,889.00₹
131.6 40 mm dia. medium quality 30.00 M. ₹ 399.00 11,970.00₹
131.7 50 mm dia. medium quality 30.00 M. ₹ 520.00 15,600.00₹
131.8 (EXTERNAL WORK)
131.9 65mm. medium quality 30.00 M. ₹ 653.00 19,590.00₹
131.10 80mm. medium quality 20.0 M. ₹ 841.00 16,820.00₹
131.11 100mm. medium quality 150.0 M ₹ 1,184.00 1,77,600.00₹
131.12 For Concealed work -₹
131.13 15 mm dia. medium quality 325.0 M ₹ 224.00 72,800.00₹
131.14 20 mm dia. medium quality 145.0 M ₹ 246.00 35,670.00₹
131.15 25 mm dia. medium quality 65.0 M ₹ 337.00 21,905.00₹
131.16 32 mm dia. medium quality 69.0 M ₹ 380.00 26,220.00₹
131.17 40 mm dia. medium quality 106.0 M ₹ 436.00 46,216.00₹
131.18 50 mm dia. medium quality 120.0 M ₹ 557.00 66,840.00₹
132 Providing and fixing Ball Float valve (Brass) of approved quality, High or Low pressure,
with Plastic Floats all complete.
(Make :- "Zoloto" / "Sant" / "Neta" / "Leader")
25 mm nominal bore 2.0 each ₹ 756.40 1,512.80₹
133 Supplying, fitting and fixing approved brand P.V.C CONNECTOR white flexible, with both
ends coupling with heavy brass C.P. nut 15 mm dia.
450 mm long 130.0 each ₹ 56.00 7,280.00₹
134 Supplying, Fitting and fixing Brass Stop Cock, of approved quality C.P.
15mm dia 3.0 each ₹ 499.00 1,497.00₹
135 Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to
21 kg per sq. cm. (for water lines only).
135.1 25 mm 3.0 each ₹ 708.00 2,124.00₹
135.2 32 mm 2.0 each ₹ 1,015.00 2,030.00₹
135.3 40 mm 4.0 each ₹ 1,250.00 5,000.00₹
135.4 50 mm 11.0 each ₹ 1,824.00 20,064.00₹
136 Supplying, fitting, fixing of G.I. Union.
136.1 15 mm 6.0 each ₹ 52.00 312.00₹
136.2 20 mm 3.0 each ₹ 77.00 231.00₹
136.3 25 mm 3.0 each ₹ 106.00 318.00₹
136.4 32 mm 2.0 each ₹ 152.00 304.00₹
136.5 40 mm 4.0 each ₹ 187.00 748.00₹
136.6 50 mm 10.0 each ₹ 282.00 2,820.00₹
137 Painting of G.I. Pipes and fittings with Synthetic enamel white paint over a ready mixed
priming coat, both of approved quality for new work.
(For exposed portion of the pipes with colour "Sea Green")
137.1 15mm. nominal bore 25.0 M ₹ 9.15 228.75₹
137.2 20mm. nominal bore 80.0 M ₹ 10.70 856.00₹
137.3 25mm. nominal bore 140.0 M ₹ 14.15 1,981.00₹
137.4 32mm. nominal bore 23.0 M ₹ 16.65 382.95₹
137.5 40mm. nominal bore 30.0 M ₹ 19.80 594.00₹
137.6 50mm. nominal bore 30.00 M ₹ 23.13 693.90₹
138 Cutting chases upto 125 X 150 mm and subsequent mending damages 253.00 M ₹ 77.36 19,572.08₹
139 Supplying, fitting and fixing C.I. holder bat clamp including cutting holes in wall etc. and
mending good all damages in cement concrete with jhama chips (4:2:1) and cement
plaster (6:1) to match and curing complete in all respect.
139.1 50 mm 4.0 each ₹ 61.00 244.00₹
139.2 100 mm 14.0 each ₹ 156.00 2,184.00₹
140 Supplying, fitting and fixing stop cock/ bib cock
140.1 Chromium plated bib cock short body (Equivalent to code no. 511 & Model - Tropical/
Sumthing Special of Essco or similar brand) 3.0 each ₹ 511.00 1,533.00₹
140.2 Chromium plated angular stop cock with wall flange (Equivalent to code no. 5053 &
Model - Florentine of Jaquar or similar brand) 110.0 each ₹ 856.00 94,160.00₹
SANITARY AND PLUMBING SECTION
Sl. Item Description Quantity Unit Rate (Rs.) Amount (Rs.)
141 Supplying PVC water storage tank of approved qualty with closed top with lid (Black) -
Multilayer
141.1 A) 3000 litre capacity 4 each ₹ 18,520.00 74,080.00₹
141.2 B) 2000 litre capacity 2.0 each ₹ 11,961.00 23,922.00₹
142 Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of
approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).
142.1 15 mm 6.0 each ₹ 505.00 3,030.00₹
142.2 20 mm 3.0 each ₹ 645.00 1,935.00₹
142.3 40 mm 4.0 each ₹ 1,800.00 7,200.00₹
143 Supply, Installation, Testing & Commissioning of M.S. Galvanised 'SCREWED' type
Flanges conforming to BS- 10, Table- 'D' / or relevant IS -1538 codes, including CAF/
NEOPRENE Gaskets and necessary welding with the 80mm dia G.I. pipe, and also with
G.I. Nuts, Bolts, and Washers including painting with two coats of Red-oxide Primer and
two coats of synthetic enamel 'Sea Green' paint with suitable Band colour (as per IS-
2379).
100 mm NB (nominal bore) 76.0 each ₹ 632.00 48,032.00₹
144 C.I. sluice valve with flanged ends drilled to as per I.S. 1358/62 and having all cast iron
components as per I.S. 780/71 solid forged bronze inside screw spindle having ultimate
tensile strength not less than 4.72 mt per sq. cm. Spindle nut valve and seat faces of
hard wear resisting, manufactured from best quality gunmetal conforming to I.S. 780/71,
painted black all over with asphalt base paint tested to 21 kg (hydraulic pressure) per sq.
cm., valve opening to anticlockwise direction, fitted and fixed complete.
100 mm
38.00 each ₹ 4,809.00 1,82,742.00₹
145 Supplying materials & labour for painting exposed new G.I pipe and fitting, with two coats
of approved synthetic enamel paint over a priming coat of red oxide all complete as per
specification and direction of E/ I.
100mm dia G.I pipe 233.0 M ₹ 30.00 6,990.00₹
146 Providing and fixing C.P. Brass 2-way Bib cock of approved quality conforming to IS :
8931
(Make :- "Jaquar","Continental", cat. No.- 041)
15 mm nominal bore 67.0 each ₹ 1,043.00 69,881.00₹
147 Providing and fixing C.P. Brass "Health Faucet" with 8mm dia 1.0 meter long flexible tube
& wall hook of approved quality conforming to IS : 8931
(Make :- "Jaquar","Allied", cat. No.- 573)
15 mm nominal bore 67.00 each ₹ 2,062.00 1,38,154.00₹
148 Supplying, fitting and fixing Stainless Steel sink complete with waste fitting and two coats
painting of C.I. brackets.
Sink with drain board 1050 mm x 450 mm x 180 mm 3.00 each ₹ 5,993.00 17,979.00₹
149 Supplying, fitting, fixing cast iron spun pipe conforming to I:S 1536/1976 with all
necessary specials including cutting trenches in any soil or throught masonry, concrete
etc. if necessary, and mending good all damages including jointing pipes with Tyton joints
as per manufacturer's specifications and fitting up the trenches all complete but excluding
the cost of masonry or concrete work, if required. class A
149.1 150 mm nominal dia 780.0 Meter ₹ 2,004.00 15,63,120.00₹
149.2 100 mm nominal dia 520.0 Meter ₹ 1,315.00 6,83,800.00₹
149.3 80 mm nominal dia 270.0 Meter ₹ 1,085.00 2,92,950.00₹
150 Painting Sand Cast Iron / Centrifugally cast (Spun) iron Soil, Waste, Vent pipes and
fittings with paint of any colour such as chocolate grey, or buff etc. over a coat of primer
(of approved quality) for new work :
150.1 100mm diameter pipe 496.00 Per M ₹ 35.00 17,360.00₹
150.2 80mm diameter pipe 258.00 Per M ₹ 26.85 6,927.30₹
151 Providing and filling the joints with Spun Yarn cement slurry and cement mortar 1:2 (1
cement : 2 fine sand) in S.C.I. / C.I. Pipes :
151.1 80MM DIA Pipe 68.00 each ₹ 49.60 3,372.80₹
151.2 100MM DIA Pipe 1292.0 each ₹ 58.40 75,452.80₹
152 Providing Lead caulked joints to Sand cast iron / Centri cast iron pipes and Fittings of
diameter :
152.1 100 mm 1292.0 each ₹ 247.95 3,20,351.40₹
152.2 80 mm 68.00 each ₹ 211.30 14,368.40₹
153 Supplying specials only of cast iron supn pipe conforming to I:S 1536 / 1976 including
cutting trenches in any soil or through masonry, concrete etc. if necessary and mending
good damages including jointing with Tyton joints as per manufacturer's specifications
excluding the cost of concrete or masonry work, if required, but including the cost of filling
up trenches (for all dia, specials, payment will be made on the basis of actual weight of
the specials) 1900.0 Kg ₹ 75.24 1,42,956.00₹
154 Supplying, fitting and fixing C.I. holder bat clamp including cutting holes in wall etc. and
mending good all damages in cement concrete with jhama chips (4:2:1) and cement
plaster (6:1) to match and curing complete in all respect.
100 mm 149.0 each ₹ 156.00 23,244.00₹
Sl. Item Description Quantity Unit Rate (Rs.) Amount (Rs.)
155 Supplying, fitting and fixing approved patent vent cowl I.C.I conforming to I.S.S and
painting two coats to the exposed surface with approved paint complete. (Payment of
painting will however be paid seperately).
155.1 100 mm dia. 14.0 Each ₹ 317.00 4,438.00₹
155.2 75 mm 13.0 Each ₹ 237.00 3,081.00₹
156 Supplying, fitting and fixing Cast iron inverted single junction or antisyphon all degrees
conforming to I.S. 3989/1970 and 1729/1964 including jointing and painting two coats to
the exposed surface. (Painting will however be paid seperately).
With valamoid joints including sealing the top with cement mortar (4:1) upto quarter
depth.
100 mm x 50 mm
55.0 each ₹ 708.00 38,940.00₹
157 Supplying, fitting and fixing Cast iron single beanch equal with door conforming to I.S.
1729/1970 and including jointing and painting two coats to the exposed surface with
approved paint complete. (Payment of painting will however be paid seperately).
With valamoid joints including sealing the top with cement mortar (4:1)
100 mm dia
73.0 each ₹ 748.00 54,604.00₹
158 H.I.C bell month plain trap supplied, fitted and fixed with lead jointing complete 100 mm
dia and painting two coats to the exposed surface with approved paint complete.
(Payment of painting will however be paid seperately). 146.0 each ₹ 789.00 1,15,194.00₹
159 Supplying, fitting and fixing H.C.I. bend with door conforming to I.S.S. including jointing
complete and painting two coats to the exposed surface with approved paint complete.
(payment of painting will however be paid seperately).
With lead caulked joints
150 mm dia 17.0 Each ₹ 1,082.00 18,394.00₹
160 Supplying, fitting and fixing cast iron single branch equal with door conforming to IS:
1729/1970 including joining and painting two coats to the exposed surface with approved
paint complete. (payment of painting will however be paid seperately).
With lead caulked joints
150 mm dia
4.0 Each ₹ 1,705.00 6,820.00₹
161 Cutting Holes and subsequent mending good damages :
161.1 diameter exceeding 150 mm but not exceeding 300 mm - In brick work 23.00 each ₹ 134.76 3,099.48₹
161.2 diameter upto 150 mm in concrete work plain or R.C 12.00 each ₹ 104.96 1,259.52₹
162 Providing and fixing to the Inlet mouth of Rain water pipe Cast iron Grating 15 cm
diameter and weighing not less than 440 grams. 12.0 each ₹ 45.90 550.80₹
163 Providing Lead Caulked joints to Sand cast iron Rain water Pipes and Fittings :-
(Make :- "Neco" / "Hepco'" / "Kapilansh Dhatu Udyog" / "BIC" / or eqivalent any approved
make)
150mm dia Pipe.
(Joints with Inlet Mouth with the Down-take Pipes) 311.00 each ₹ 343.60 1,06,859.60₹
164 Supplying G.I. pipe strainer with brass net & jacketted of approved quality - (Heavy
Type).
40 mm dia. 155.0 Metre ₹ 930.00 1,44,150.00₹
165 Supplying, fitting and fixing PVC pipes of approved make of (medium duty conforming to
ASTMD-1785 and theraded to match GI Pipes as per IS: 1239 (Part-I) with all necessary
accessories, specials viz. socket, bend,tee, union, cross, elbo, nipple, logscrew, reducing
socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting
pipes, making therads, fitting, fixing etc. complete in all respect including cost of all
necessary fittings as required, jointing materials and two coats of painting with approved
paint in any position above ground. (Payment will be made on the centre line
measurements of total pipe line including all specials. No separate payment will be made
for accesories, specials, Payment for painting will be made Seperately)
165.1 32 mm dia 20.0 M ₹ 191.00 3,820.00₹
165.2 40 mm dia 21.0 M ₹ 233.00 4,893.00₹
166 Supplying and fixing complete Bottle waste trap (Heavy Quality)
Chromium plated Bottle trap 32 mm with 190 mm long connecting pipe and wall flange
(Equivalent to Code No. 545 & Model - Tropical / Sumthing Special of ESSCO or similar
brand) 48.0 Each ₹ 677.00 32,496.00₹
167 Supplying, fitting & fixing Waste fittings complete.
Waste coupling - Half threaded 32 mm of 80 mm length and 67 mm breadth, 32.0 each ₹ 218.00 6,976.00₹
168 Supplying fitting, fixing C.I. Specials of down pipes in position with clamps nails etc. with
jointing materials including cutting holes in masonry or concrete, mending good damages
complete.
CI Bend of down pipe (without door)
150 mm Dia. 16.0 each ₹ 892.44 14,279.04₹
169 Supplying, fitting & fixing porcelain partition wall of approved make of size 618 mm x 310
mm complete in all respect. 20.00 Each ₹ 1,246.00 24,920.00₹
Sl. Item Description Quantity Unit Rate (Rs.) Amount (Rs.)
170 Supplying, fitting & fixing Flat back urinal (half stall urinal) in white vitreous chinaware f
approved make in postion with brass screws on 75 mm x 75 mm x 75 mm wooden blocks
complete.
590 mm x 390 mm 380 mm 32.0 each ₹ 2,937.00 93,984.00₹
171 Supplying, fitting & fixing Foot rest for water closet of size 275 mm x 125 mm with.
Porcelain of approved make.
32.0 pair ₹ 195.00 6,240.00₹
172 Suplying, fitting & fixing urinal flush pipe fittings of approved brand
172.1 C.P. urinal flush pipe fittings range of three. 10.0 each ₹ 1,459.00 14,590.00₹
172.2 C.P. urinal flush pipe fittings range of two 1.0 each ₹ 1,043.00 1,043.00₹
173 Supplying, fitting and fixing dome shaped C.P. waste grating for urinals.
32 mm dia. 32.0 each ₹ 209.00 6,688.00₹
174 Suplying, fitting & fixing E.W.C in white glazed vitreous chinaware of approved make
complete inposition with necessary bolts, nuts etc.
W.C. Pan with "S" Trap (with one Conversion Bend). 53.00 each ₹ 1,372.00 72,716.00₹
175 Suplying, fitting & fixing Closet seat of approved make with lid and C.P hinges, rubber
buffer and brass screws complete.
Besttolite (solid type) white 53.00 each ₹ 762.00 40,386.00₹
176 Supplying, fitting and fixing 32 mm dia. Flush pipe of approved make with necessary
fixing materials and champs complete.
C.P Flush pipe 53.00 each ₹ 276.00 14,628.00₹
177 Supplying, fitting and fixing 10 litre P.V.C low-down cistern conforming to I.S specification
with P.V.C fittings complete, C.I brackets including two coats of painting to bracket etc.
53.00 each ₹ 1,129.00 59,837.00₹
178 Supplying, Fitting and fixing Squating plate with integral flushing in white vitreous
chinaware of approved make in cement concrete (6:3:1) with jhama chips complete,
(Payment of concrete will be paid seperately) 12.00 each ₹ 1,049.00 12,588.00₹
179 Supplying, fitting and fixing twoel rail with two brackets.
25 mm dia. and 750 mm long 30.00 each ₹ 395.00 11,850.00₹
180 Supplying, fitting and fixing liquid soap container.
Cromium plated 53.00 each ₹ 428.00 22,684.00₹
181 Supplying, fitting and fixing porcelain soap tray of approved make.
Recessed soap tray of size 150mm X 150mm 53.00 each ₹ 375.00 19,875.00₹
182 Providing and fixing white vitreous china "Floor mounted" type Composite Water closet
(European type W.C. pan) with seat and lid, conforming to IS : 2556; including with white
Vitreous Chinaware matching Cistern complete with all accessories i.e., Grab Bar (in
horizontal & vertical grabbing), also including with matching Wash Basin & its
accessories etc, also with all fittings and fixtures complete including cutting and making
good the wals and floors wherever required.
(for Handicapped person's Toilets)
(colour- Star White) - "S" Trap type.
W.C. Pan with ISI marked white/Black solid plastic seat and Lid.
Details of COST of one Pan composite with Cistern, Flush Pipe, Horizontal &
Vertical Grab Bars, including with matching Handicapped person's Wash Basin &
its accessories etc.
Wash Basin with one pair mounting Brackets, EWC & Cistern complete with Fittings &
Seat Cover, and one no. Hinged rail 76cm & five nos. of Grab rails 60cm, and one no. of
Faucet for WB..
10.0 each ₹ 52,467.00 5,24,670.00₹
183 Supplying,fitting and fixing vitreous china best quality approved make wash basin with
C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one
approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30
mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long
approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending
good all damages and painting the brackets with two coats of approved paint.
550 mm x 400 mm size
48.0 each ₹ 2,038.00 97,824.00₹
184 Supplying, fitting fixing pedestal of approved make for wash basin (white) 48.0 each ₹ 1,266.00 60,768.00₹
185 Providing and fixing white vitreous china "Wall mounted" type water closet (European
type W.C. pan) with seat and lid, conforming to IS : 2556; including with "Jaquar"
make Metropole Flush Valve (Model- FLV-1085DFP), Dual Flow 32mm Size
(Concealed Body) With Concealed Shut Off Provision & Rectangular Dual Flush
Plate (ABS Chrome Plated), with 32mm control cock & Elbow set complete with
adjustable Sleeve and Wall Flange; with all fittings and fixtures complete including
cutting and making good the wals and floors wherever required.
(In Chairman's, CEO's & for Director's Engg. Office Toilets)
(colour- Star White) - "S" Trap type
W.C. Pan with ISI marked matching plastic seat and lid with Steel hinges.
(Make :- "Hindware"- Ultra, cat no.-20006, without Cistern / "Parryware", cat. No.-
)
4.0 each ₹ 10,220.00 40,880.00₹
Sl. Item Description Quantity Unit Rate (Rs.) Amount (Rs.)
186 Supplying, fitting and fixing with cement jointing (3:1) salt glazed stoneware pipe including
excavation of earth upto 1.50 metre depth in all sorts of soil both mixed or unmixed and
refilling (but excluding concreting at bottom and sides).
186.1 150 mm 20.0 meter ₹ 300.00 6,000.00₹
186.2 225 mm 230.0 meter ₹ 502.00 1,15,460.00₹
187 Cement concrete with graded jhama khoa (30 mm size) excluding shuttering in ground
floor and foundation.
1:3:6 proportion 45.0 Cum ₹ 5,004.30 2,25,193.50₹
188 Supplying, fitting and fixing yard gully with approved H.C.I grating complete.
225 mm x 150 mm x 230 mm gratings 7.0 each ₹ 514.00 3,598.00₹
189 Constructing Inspection pit to a depth of 1.5 metre (inside), 250 mm thick 1st class brick
work (6:1) in all sides over a layer of jhama brick soling and 150 mm thick cement
concrete with jhama khoa (6:3:1) including necessary earth work, fitting and fixing
approved type S.W. master trap, constructing masonry invert with cement concrete
(4:2:1) with jhama chips, plastering inside and outside (outside upto 300 mm below G.L.)
with 19 mm thick cement plastering (4:1) and neat cement punning, including
supplying,fitting and fixing one 560 mm. dia R.C.C. manhole cover of approved make
with R.C.C. slab of 100 mm thick with cement concrete (4:2:1) with stone chips including
necessary reinforcement (upto 1%) and shuttering and necessary corbelling brick work
(6:1) so that the R.C.C. cover slab rests 150 mm above adjucent G.L., cement plaster
(4:1) 6 mm thick on all external surfaces of the top slab as directed complete in all
respect and removal of surplus earth with all costs of labour and materials (excluding the
cost of master trap only).
1050 mm X 750 mm (inside) chamber including fitting and fixing S.W. master trap of 225
mm dia of approved make
35.0 each ₹ 10,991.00 3,84,685.00₹
190 Supplying, fitting and fixing S. W master trap.
225 mm x 225 mm 35.0 each ₹ 5,439.00 1,90,365.00₹
191 Extra for additional depth beyond 1.5 metre. 20.5 metre ₹ 3,305.00 67,752.50₹
192 Providing and laying of NP-2 class R.C.C. pipes with Collars, jointed with stiff mixture of
cement mortar in the proportion of 1:2 (1 cement : 2 fine sand), including testing of joints,
etc., complete.
(Make:- "West Bengal Concrete Industries pvt. Ltd." /"Eastern Spuncrete" / "SUR" /
or equivalent)
192.1 150mm dia. R.C.C. pipe. 100.0 Metres ₹ 397.60 39,760.00₹
192.2 250mm dia. R.C.C. pipe. 160.0 Metres ₹ 506.10 80,976.00₹
192.3 300mm dia. R.C.C. pipe. 130.0 Metres ₹ 663.95 86,313.50₹
192.4 450mm dia. R.C.C. pipe. 10.0 Metres ₹ 979.20 9,792.00₹
193 Construction Inspection pit of inside measurement 600mm x 600mm x upto 600mm
(depth) with 250mm thick 1st class brick work in cement mortar (1:4) on all sides, bottom
of the pit consisting of 100mm thick cement concrete (1:3:6) with stone chips over a layer
of jhama brick flat soling, 15mm thick (1:4) cement plaster to inside walls and out-side
walls upto G.L and 20mm thick (1:4) plaster to bottom of the pit, providing necessary
invert with cement concrete (1:3:6) with stone chips as per direction, neat cement
finishing to entire internal surfaces, top of the pit covered with 100mm thick RCC slab
(1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including
6mm thick cement plaster (1:4) in all external surfaces of the slab and one 560mm dia
RCC manhole cover of approved make supplied fitted and fixed in the slab with
necessary fittings, necessary earthwork in excavation in all sopts of soil, filling sides of
the pit with earth and removing spoils after work complete in all respect with all costs of
labour and materials.
With F.P.S. Bricks
20.00 Each ₹ 6,736.00 1,34,720.00₹
194 Supplying,fitting and fixing in position G.I.pipes of TATA make for underground works
with all necessary accessories, specials viz.socket, bend, tee, union, cross, elbow,
nipple, short pieceetc.including cost of all materials, jointing materials, cutting pipes,
making threads, cutting trenches upto 1.5 metre below surface in all sorts of soil and
refilling the same as directed with two coats of painting on G.I. pipes and specials with
bituminous paint complete in all respect. (Payment will be made on the centre line
measurement of the total pipe line including all specials No separate payment will be
made for accessories, specials.Payment for painting will be made separately.)
40 mm dia. medium quality
76.0 Metre ₹ 390.00 29,640.00₹
195 Providing and fixing gun metal non-retirn value of approved quality (screwed end).
(Make :- "Marck" / "Sant" / "Leader" /"Neta"/"SBM"/ or equivalent) :- One at each
De-watering Pump Discharge Pipe.
40 mm nominal bore.
Horizontal.
4.0 each ₹ 970.00 3,880.00₹
Sl. Item Description Quantity Unit Rate (Rs.) Amount (Rs.)
196 BASEMENT DE-WATERING PUMP
Supplying, installation, testing and commissioning of Basement "De-watering Pump" with
matching Motor Control Panel of Mono-set fully submersible Vertical mounting type
reservoir pumps for transfer of logged water from Basement to the adjascent outside
building Yard Gully Chamber / Storm water Manhole.
Pump should be with CI 'Mixed Flow' / 'Radial Flow' type Impellers, integrally coupled with
submersible type 3 – phase 2900 RPM 415volts, AC motor capable to withstand a
voltage variation of (+/-) 10% and frequency variation of (+/-) 3%, but excluding pump
control panel.
Pump of capacity – approximate - 200.0 LPM @ 8.0 M head with KW ( HP) Motor
input, 3 phase integrally coupled "Submersible" type Motor.
(To be located inside the BASEMENT) 4.0 Sets ₹ 37,650.00 1,50,600.00₹
197 Supplying, fitting and fixing in position C.I. manhole/ pit cover with rim.
Rectangular.
600 mm x 450 mm x 50 kg (approx) 47.0 pcs. ₹ 3,359.00 1,57,873.00₹
198 PIPES
Supplying,fitting and fixing in position G.I.pipes of TATA make for underground works
with all necessary accessories, specials viz.socket, bend, tee, union, cross, elbow,
nipple, short pieceetc.including cost of all materials, jointing materials, cutting pipes,
making threads, cutting trenches upto 1.5 metre below surface in all sorts of soil and
refilling the same as directed with two coats of painting on G.I. pipes and specials with
bituminous paint complete in all respect. (Payment will be made on the centre line
measurement of the total pipe line including all specials No separate payment will be
made for accessories , specials.Payment for painting will be made separately.)
External work
198.1 20 mm dia medium quality 25.00 Metre ₹ 229.00 5,725.00₹
198.2 25 mm dia medium quality 25.0 Metre ₹ 309.00 7,725.00₹
198.3 32 mm dia medium quality 40.0 Metre ₹ 342.00 13,680.00₹
198.4 65 mm dia medium quality 20.0 Metre ₹ 640.00 12,800.00₹
199 RAW WATER FEED PUMPS ; 2.0 nos. (1-working + 1-standby)
Constructing Inspection pit to a depth of 1.5 metre (inside), 250 mm thick 1st class brick
work (6:1) in all sides over a layer of jhama brick soling and 150 mm thick cement
concrete with jhama khoa (6:3:1) including necessary earth work, fitting and fixing
approved type S.W. master trap, constructing masonry invert with cement concrete
(4:2:1) with jhama chips, plastering inside and outside (outside upto 300 mm below G.L.)
with 19 mm thick cement plastering (4:1) and neat cement punning, including
supplying,fitting and fixing one 560 mm. dia R.C.C. manhole cover of approved make
with R.C.C. slab of 100 mm thick with cement concrete (4:2:1) with stone chips including
necessary reinforcement (upto 1%) and shuttering and necessary corbelling brick work
(6:1) so that the R.C.C. cover slab rests 150 mm above adjucent G.L., cement plaster
(4:1) 6 mm thick on all external surfaces of the top slab as directed complete in all
respect and removal of surplus earth with all costs of labour and materials (excluding the
cost of master trap only).
900 mm X 750 mm (inside) chamber including fitting and fixing S.W. master trap of 150
mm dia. of approved make.
with Pakur variety
1.00 each ₹ 10,549.00 10,549.00₹
200 Water Meter
Providing and fixing "enclosed" type Water Meter ("Bulk" type), conforming to IS- 2373,
includiung Calibration Certificate, and duly tested by the Municipal Board, also with (up-
stream & down-stream) - 2.0 nos. and 2.0 nos. necessary Matching Flanges; all complete
with necessary Bolts, nuts, rubber insertions etc.,
(Make :- "DASHMESH" / "KAYCEE", / "CAPSTAN", )
50mm nominal bore
1.00 each ₹ 8,344.00 8,344.00₹
201 Providing & fixing Bronze body "VERTICAL -LIFT" type Non-Return ("Check") valve with
S.S. (AISI-410) body Seat Ring, two-piece design, S.S.(AISI-410) Disc, Screwed to
BSPT-female (BS-21), with necessary 'Teflon' Thread Seal, including accessories.
(Make :- "ZOLOTO", code-1045 / "SANT")
50mm dia
1.00 each ₹ 3,773.00 3,773.00₹
202 Providing and fixing Bronze / Gun-metal Globe valve, rising / non-rising Spindle type (IS-
778), screwed in Bonnet, provission of repacking under pressure, Teflon Gland packing,
Class-I, with 'OPEN'/ 'SHUT' indicator and locking device, and also with C.I. Wheel of
approved quality (screwed end).
(Make :- Zoloto, code- 1033 / "Sant" /"SBM"/ "Leader")
50mm diameter 1.00 each ₹ 2,262.00 2,262.00₹
Sl. Item Description Quantity Unit Rate (Rs.) Amount (Rs.)
203 BLOW-OFF VALVE -under High pressure
Providing and fixing Bronze / Gun metal body "Parallel Slide" - "Blow-off" valve with BS-
10 Table- H / E Flanged ends,sliding action Discs, spring loaded, rack-pinion arragt., S.S
Discs, Body Seat Ring of S.S., Grahite Asbestos packing, M.S. Key, with Hyd. test
pressure of 500 p.s.i.g, with adjustable 'OPEN' / 'SHUT' arragt. of approved quality
(Flanged end)
(Make :- Zoloto, code- 1052 )
100mm diameter 3.00 each ₹ 18,558.00 55,674.00₹
204 TREATED WATER PUMP-(Hydro-pneumatic) FROM S.T.P.
(Supply, Carriage, Installation & Commissioning)
It shall be of Hydro-pneumatic type Pumps in a single Skid with (2-working + 1-standby)
for transfer of water from STP Treated Water Tank to directly to individual Toilets for
Flushing & for Gardening Points etc, with an extra provision to connect with the terrace
Domestic tank to store the water suitable to suit the water quality required for Flushing &
Gardening use (as per IS-10500).
(Pumps should be with C.I. Impeller, integrally coupled with 3 – phase 2900 R.P.M., 415
Volts, A.C. Motor, capable to withstand a voltage variation of (+/-) 10% and frequency
variation of (+/-) 3%, including Pump Control Panel with "Auto" Start / Stop 3nos.
"Indfoss' make Pressure switch with each sets of Pump and one set of Pressure Gauge
connected with a Ball Valve of 15mm dia to the Delivery Header.
Pump of Maximum capacity – 333.0 LPM (i.e., 20 cum/hr.) @ 50.0 M head with maximum
4.4 KW (Working), 6.6 KW (Total Connected) - Motor input, 3 phase integrally coupled
Motor, including Pump Control Panel, 100 Ltrs. capacity Air aharged Diaphragm Tank
(Pressure Vessel), Mounting Base, Baseframe, Pressure Switches, Panel to Pump
Cabling, etc, including all necessary accessories.
(To be located near the STP Treated Water Tank).
Make = "GRUNDFOS", Model :- 'MPC F 4 CR 10-6', /"Willo" / "SAMLSON").
1.00 each ₹ 8,36,500.00 8,36,500.00₹
205 WATER FEED PUMP from Rain Harvesting tank to Gardening use & Toilet
Flushing
(Supply, Carriage, Installation & Commissioning)
It shall be of Hydro-pneumatic type Pumps in a single Skid with (2-working + 1-standby)
for transfer of water from Rain Harvested Water Tank to directly to individual Toilets for
Flushing & for Gardening Points etc, with an extra provision to connect with the terrace
Domestic tank to store the water suitable to suit the water quality required for Flushing &
Gardening use (as per IS-10500).
(Pumps should be with C.I. Impeller, integrally coupled with 3 – phase 2900 R.P.M., 415
Volts, A.C. Motor, capable to withstand a voltage variation of (+/-) 10% and frequency
variation of (+/-) 3%, including Pump Control Panel with "Auto" Start / Stop 3nos.
"Indfoss' make Pressure switch with each sets of Pump and one set of Pressure Gauge
connected with a Ball Valve of 15mm dia to the Delivery Header. .
Pump of Maximum capacity – 333.0 LPM (i.e., 20 cum/hr.) @ 50.0 M head with maximum
4.4 KW (Working), 6.6 KW (Total Connected) - Motor input, 3 phase integrally coupled
Motor, including Pump Control Panel, 100 Ltrs. capacity Air aharged Diaphragm Tank
(Pressure Vessel), Mounting Base, Baseframe, Pressure Switches, Panel to Pump
Cabling, etc, including all necessary accessories.
(To be located near the Rain Harvested Water Tank in a Pump room)
Make = "GRUNDFOS", Model :- 'MPC F 4 CR 10-6', /"Willo" / "SAMLSON").
1.00 each ₹ 8,36,500.00 8,36,500.00₹
Sl. Item Description Quantity Unit Rate (Rs.) Amount (Rs.)
206 DRINKING & HAND-WASH WATER FEED PUMP from u/g Domestic Water
Reservoir to different Toilets Wash Basins & Ablution Taps, Kithen Sinks, Drinking
Water Units,
(Supply, Carriage, Installation & Commissioning)
It shall be of Hydro-pneumatic type Pumps in a single Skid with (3-working + 1-standby)
for transfer of water from the U/G Domestic Water Reservoir to directly to individual
Toilets & Kitchen for Hand-wash & Drinking use etc, with an extra provision to connect
with the terrace Domestic tank to store the water suitable to suit the water quality
required Drinking use (as per IS-10500).
(Pumps should be with C.I. Impeller, integrally coupled with 3 – phase 2900 R.P.M., 415
Volts, A.C. Motor, capable to withstand a voltage variation of (+/-) 10% and frequency
variation of (+/-) 3%, including Pump Control Panel with "Auto" Start / Stop 3nos.
"Indfoss' make Pressure switch with each sets of Pump and one set of Pressure Gauge
connected with a Ball Valve of 15mm dia to the Delivery Header, also including with one
100 Ltrs. capacity Air charged Diaphragm tank.
Pump of Maximum capacity – 500.0 LPM (i.e., 30 cum/hr.) @ 50.0 M head with maximum
6.6 KW (Working), 8.8 KW (Total Connected) - Motor input, 3 phase integrally coupled
Motor, including Pump Control Panel, 100 Ltrs. capacity Air aharged Diaphragm Tank
(Pressure Vessel), Mounting Base, Baseframe, Pressure Switches, Panel to Pump
Cabling, etc, including all necessary accessories.
(To be located inside the Pump room of near the near the Basement Domestic
Water Reservoir)
Make = "GRUNDFOS", Model :- 'MPC F 4 CR 10-6', /"Willo" / "SAMLSON").
1.00 each ₹ 8,36,500.00 8,36,500.00₹
207 Sypplying, fitting & fixing CI square jalli
450 mm 1900 each ₹ 302.00 5,73,800.00₹
208 Water supply Pipe from Domestic water supply Pump upto the Wet Riser of
different Toilet points
Supplying,fitting and fixing in position G.I.pipes of TATA make for underground works
with all necessary accessories, specials viz.socket, bend, tee, union, cross, elbow,
nipple, short pieceetc.including cost of all materials, jointing materials, cutting pipes,
making threads, cutting trenches upto 1.5 metre below surface in all sorts of soil and
refilling the same as directed with two coats of painting on G.I. pipes and specials with
bituminous paint complete in all respect. (Payment will be made on the centre line
measurement of the total pipe line including all specials No separate payment will be
made for accessories , specials.Payment for painting will be made separately.)
100 mm dia. medium quality
297.00 M. ₹ 1,167.00 3,46,599.00₹
209 C.I. sluice valve with flanged ends drilled to as per I.S. 1358/62 and having all cast iron
components as per I.S. 780/71 solid forged bronze inside screw spindle having ultimate
tensile strength not less than 4.72 mt per sq. cm. Spindle nut valve and seat faces of
hard wear resisting, manufactured from best quality gunmetal conforming to I.S. 780/71,
painted black all over with asphalt base paint tested to 21 kg (hydraulic pressure) per sq.
cm., valve opening to anticlockwise direction, fitted and fixed complete.
100 mm
12.0 each ₹ 4,809.00 57,708.00₹
210 Supplying, fitting and fixing C.I. tail pieces in pair conforming to I.S. specifications.
100 mm
12.0 Each Pair ₹ 1,496.00 17,952.00₹
211 Supply, Installation, Testing & Commissioning of M.S. Galvanised 'SCREWED' type
Flanges conforming to BS- 10, Table- 'D' / or relevant IS -1538 codes, including CAF/
NEOPRENE Gaskets and necessary welding with the 80mm dia G.I. pipe, and also with
G.I. Nuts, Bolts, and Washers including painting with two coats of Red-oxide Primer and
two coats of synthetic enamel 'Sea Green' paint with suitable Band colour (as per IS-
2379).
100 mm NB (nominal bore) 80.0 each ₹ 267.75 21,420.00₹
212 Provision of Pressure Filtration unit consisting of Multigrade Filtration unit of capacity
20 Cu.M per Hr. for purification of Accumulated Rainwater before putting into use
1.0 each ₹ 3,50,000.00 3,50,000.00₹
TOTAL 1,18,38,313.00₹
ADD 8.44% 9,99,154.00₹
TOTAL 1,28,37,467.00₹
ADD 0.40% 51,350.00₹
TOTAL 1,28,88,817.00₹
SS/1 Supplying Ready Mixed Concrete of M30 grade with well graded
stonechips of 20mm nominal size containing designed quantity of
cement per Cu. Mtr of wet concrete produced in computerized batching
plant under controlled condition using approved superplasticizer,
designing concrete mix following IS 10262 and IS 456. transporting the
mix with agitation in transit mixer to work site depositing the mix on a
platform erected for the purpose at required level of concreting and
then placing the mix in its final location of formwork, compacting and
curing the same complete as per specification and direction of the
Engineer-in-charge. including computerized batching palnt, transit
mixer with all accessories vibrators etc. inclusive of all other incidental
charges in this connection completed but excluding cost of hire
charges of platform and its supporting staging which could be paid
through seperate item. {Cement to be supplied by the manufacturer /
supplier}
1.1 Basement (with approved concrete pump) 4000.00 CuM ₹ 7,479.91 2,99,19,640.00₹
1.2 Ground Floor (with approved concrete pump) 605.00 CuM ₹ 7,458.91 45,12,640.55₹
1.3 First Floor (with approved concrete pump) 450.00 CuM ₹ 7,479.91 33,65,959.50₹
1.4 Second Floor (with approved concrete pump) 395.00 CuM ₹ 7,500.91 29,62,859.45₹
1.5 Third Floor (with approved concrete pump) 380.00 CuM ₹ 7,521.91 28,58,325.80₹
1.6 Fourth Floor (with approved concrete pump) 399.00 CuM ₹ 7,542.91 30,09,621.09₹
1.7 Terrace Floor (with approved concrete pump) 76.00 CuM ₹ 7,563.91 5,74,857.16₹
ST/01 Supplying Ready Mixed Concrete of M30 grade with well graded
stonechips of 20mm nominal size containing designed quantity of
cement per Cu. Mtr of wet concrete produced in computerized batching
plant under controlled condition using approved superplasticizer,
designing concrete mix following IS 10262 and IS 456. transporting the
mix with agitation in transit mixer to work site depositing the mix on a
platform erected for the purpose at required level of concreting and
then placing the mix in its final location of formwork, compacting and
curing the same complete as per specification and direction of the
Engineer-in-charge. including computerized batching palnt, transit
mixer with all accessories vibrators etc. inclusive of all other incidental
charges in this connection completed but excluding cost of hire
charges of platform and its supporting staging which could be paid
through seperate item. {Cement to be supplied by the manufacturer /
supplier}
Basement (without concrete pump) 0.00 CuM ₹ 7,225.00 -₹
3 ST/03 Supplying and laying Polythene Sheet (150 gms/ Sqm) over damp
proof course or below flooring or roof terracing or in foundation or in
foundation trenches. 7077.30 SqM 18.95₹ 1,34,114.80₹
4 ST/04
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar
including rounding off or chamfering corners as directed and raking out
joints including throating , nosing and drip course scaffolding / staging
where necessary (basement). Excluding the cost of chipping over
concrete surface with (1:3) cement mortar.
10mm thick plaster 1514.45 SqM 114.85₹ 1,73,935.04₹
5 SS/05 Filling in foundation or plinth by silver sand layers of not exceeding 150
as direced and consolidating the same by through saturation with water
ramming complete including the cost of supply of sand. Payment to be
made on measurement of finished quantity
Ref P-5(B) item no 3(A) P.W.D schedule 2010
6109.80 % CuM 72,881.62₹ 44,52,923.41₹
BOQ of Supplementary Items : (Analysis based on PWD SOR 2010 Rate)1
2
ADDITIONAL WORKS - A
Sl. No. Item
Ref Description of Item Quantity Unit Rate Amount
ADDITIONAL WORKS - A
Sl. No. Item
Ref Description of Item Quantity Unit Rate Amount
6 SS/04 Earth work in filling in foundation trenches or plinth with good earth, in
layers not exceeding 150 mm. including watering and ramming etc.
layer by layer complete. (Payment to be made on the basis of
measurement of finished quantity of work).
With earth obtained from excavation of foundation.Ref: Page 03, Item
No. 03(a) of PWD Schedule of Rates 2010
0.00 % CuM 5,949.40₹ -₹
7 ST/10 Carriage of Earth form working site to temporary staking and storing at
designated place and bringing bach the earth from temporary storing
place to working site 2500.00 CuM 148.00₹ 3,70,000.00₹
8 ST/8 C.I. sluice valve with flanged ends drilled to as per I.S. 1358/62 and
having all cast iron components as per I.S. 780/71 solid forged bronze
inside screw spindle having ultimate tensile strength not less than 4.72
MT per sq. cm. Spindle nut valve and seat faces of hard wear
resisting, manufactured from best quality gunmetal conforming to I.S.
780/71, painted black all over with asphalt base paint tested to 21 kg
(hydraulic pressure) per sq. cm., valve opening to anticlockwise
direction, fitted and fixed complete.
200mm
(Page 08/ SL 09 (vi) of Plumbing & Sanitary Schedule WB PWD 2010)
0.00 Nos. 12,451.00₹ -₹
TOTAL 5,23,34,877.00₹
ADD 8.44% 75,57,156.00₹
TOTAL 5,98,92,033.00₹
ADD 0.40% 41,92,442.00₹
TOTAL 5,56,99,591.00₹
Sl. No. Item Ref No. Description of Item Quantity Unit Rate Amount
ST/2 Supplying on hire basis driving and installing ISMB post (350mm X 140mm) @ 500mm c/c of 12 mtr
length (6.5 mtrs below ground) providing steel liner plate 10mm thick as required and height 5.9
mtrs, including junction and corners tapered pile etc. as per detaiiled drawing AES/NKDA/01 with
clutch bars, guides, IS angles, splices etc. where necessary, by mannual or mechanical hammering
with or without monkey between two ISMB including cutting, transporting of all equipments at work
site, fabricating, drilling holes and welding, staging, scaffolding, setting out etc. Including all
incidental charges in this connection and as directed by Engineer-in-charge. {Note:- the sheetpile
should only be removed after completion of waterproofing of the basement, retaining wall and
subsequently filling of the space by silver sand as directed by the Engineer-in-charge}
Payment Milestone :
Completion of driving of sheetpile 25%
Completion of basement floor slabs 25%
Completion of retaining wall 25%
Withdrawal of sheetpile and removal from site 25%
SqM 5,846.00₹
Completion of driving of sheetpile 25% 697.60 SqM 1,461.50₹ 10,19,542.40₹
Completion of basement floor slab 10% 1900.00 SqM 584.60₹ 11,10,740.00₹
Additional for completion of excavation and Grade beam 15% 1900.00 SqM 876.90₹ 16,66,110.00₹
Completion of retaining wall 25% 1900.00 SqM 1,461.50₹ 27,76,850.00₹
Withdrawl of sheet piles and removal from site 25% 1960.00 SqM 1,461.50₹ 28,64,540.00₹
SS/2 Performing Vertical Load Test (Compression) by hydraulic jack on pile/ piles with 1.5 times the
design load including the preparation of the head of the piles with concrete of required strength for
receiving the jacks with all anciliary arranagement for setting up gauge, construction of suitable
platforms, keeping the loads and dismantling and removing all arrangement etc. complete as per
direction of engineer in charge including cost of carriage of all material and as per IS specification on
single pile.
2.1 Testing Load between 250 MT to 300 MT 0.00 No. 1,25,000.00₹ -₹
2.2 Testing Load 415 MT 0.00 No. 3,30,246.00₹ -₹
SS/3 (i) Hacking with mechanica means on cleaned surfaces before doing the water proofing coat 1076.63 SqM 23.00₹ 24,762.58₹
SS/3 (ii) Cleaning the wall / floor from dust and loosely adhering particles completely, the prepared and
primes substrate shall be teated with a two coat Sika Topseal 109 Hi (excluding plaster), followed by
one coat of primer on the cleaning surface or equivalent two component acrylic polymer modified,
cementitious, ready to use, flexible water proofing slurry at right angles to each other and taking the
coatings upto atleast 300mm on the exterior surface as on where basis as per direcetion of EIC.
3873.11 SqM 465.00₹ 18,00,998.01₹
SS/3 (iii) Supply and application of an expanding grout admixture Interplast EP for pressure grouting using GI
nozzles and by fixing nozzles 1.5 m C/c in zigzag pattern over raft and retaining wall for ceiling voids
and capillaries and 1m c/c over construction joint. Average no. of nozzles 3-4 per SqM. Injecting
cement slurry (including supply of cement) admixed non-shrink grout SIKA Intraplast - EP as per
manufacturer's specification. 5490.00 SqM 170.00₹ 9,33,300.00₹
11 ST/5 Additional work for strengthening of sheet piles by supplying on hire basis ISMB 300 wails to be
fixed on existing sheet piles ISMB 350 and 10mm thick plate along the periphery of excavation along
with inclined struts at the rate of 4.00-6.00M centre to centre (suit at site) for preventing bulging and
bending. The item includes deployment of necessary machinaries and equipment’s as required by
means of JCB/Hydra/Poclain as required as per site condition and placing ISMB 300 where ever
required including cutting, lifting, transporting, drilling and any other fabrication work as required
including staging and scaffolding, setting out all other incidental charges as directed by E.I.C.
Note: Inclined struts may be removed after completion of grade beam and wails are to be removed
after one lift of retaining wall (1.100M) after subsequently filling intermediate space between sheet
piles and concrete structure by silver sand as directed by E.I.C.
32.90 MT 47,257.00₹ 15,54,897.07₹
12 ST/6 Additional work remeadial measure (Plan of ZZ section) of sheet piles for pile cap PC6 & PC3/SC56
(revised 5 nos. pile) at the side of Techno India College by supplying and hiring basis, driving and
installing ISMB post (350mm X 140MM) of 12 M length (1.5M below ground level) providing as per
drawing no. NKDA/SHP 02.02 with guide angles etc. where necessary by mannual or mechanical
hammer with or without monkey including cutting, transporting all equipments at work site,
fabricating, drilling hole and welding, staging, scaffolding, setting out etc. including all incidental
charges in this connection and as directed by EIC.
Note: The interlocking flanged end arrangement of ISMBs should only be removed after completion
of all relevant activities like casting of grade beam and Retaining wall, application of water proofing
chemical and subsequent sand / earth filling etc. as directed by E.I.C.
26.40 SqM 6,401.00₹ 1,68,986.40₹
13 ST/7 Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS :
10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25
mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space
between protruded legs having 2 mm tread on top surface by ribbing or chequering besides
necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing
and suitable to with stand the bend test and chemical resistance test as per specifications and
having manufacture’s permanent identification mark to be visible even after fixing, including fixing in
manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded
stone aggregate 20 mm nominal size) complete as per design.
178.00 Nos. 227.00₹ 40,406.00₹
Providing and fixing M.S slip on flange as per dimensions of table E of BS 10 on M.S pipe, to be fully
welded (Arc) with proper electrode, and fixing the same with other flanges/ valve by means of gasket
and nut bolts etc. complete as per direction of E.I.C.
Rate is inclusive of electrical charges and all incidental including transportation. -₹
14 ST/9
ADDITIONAL WORKS - B
BOQ of Supplementary Items ( Analysis based on Market Rate)
8
9
10
Sl. No. Item Ref No. Description of Item Quantity Unit Rate Amount
200mm dia 0.00 Nos. 753.00₹ -₹
100mm dia 0.00 Nos. 630.00₹ -₹
5/8" X 3" Nut & Bolts 0.00 Kgs. 92.35₹ -₹
Total 1,39,61,132.00₹
Less 7% (-) 9,77,279.00₹
Total 1,29,83,853.00₹
14 ST/9
Sl. No. Item Description Quantity Unit Rate (Rs.) Amount (Rs.)238 Electrical Section: III (LT DISTRIBUTION)
Electrical Rising main & Tap off boxes Supply, erection, testing and commissioning of 630 Amps, FP internally earthed Al. RisingMain System, IP54, 50KA breaking capacity along with all necessary fabrication ofsupports and other accessories works complete as per specification, through theshaft/ceiling/wall of different floor as required including end feed units with MCCB & tap offboxes of rating as follows at every floor . All joints / tees bends / phase change over boxesetc are deemed to be included in the supply. Arrangement for future extention arrangementupto eight floor has to included and complete as required of make MDS-Legrand/C&S orapproved equivalent. 40 RM ₹ 17,594.20 7,03,768.00₹
239 Supply, Installation, testing and connection of 4 POLE End Feed Panel with 630A, 4 pole,50KA MCCB for cable termination to Rising Main. 1 Each ₹ 71,154.50 71,154.50₹
240 Supply, Installation, testing and connection of 63A MCCB, 25kA type tap off boxes fortapping power from Rising main for second floor, third floor& fourth floor.(for basement-1no, Gnd Fl-1, 1st Fl-1, 2nd Fl-1, 3rd Fl-1 & 4th Fl-1). 10 Each ₹ 44,960.15 4,49,601.50₹
241 Supply, Installation, testing and connection of 100A MCCB, 25kA type tap off boxes fortapping power from Rising main (for 2nd Fl-1, 3rd Fl-1, 4th Fl-1 ) 3 Each ₹ 14,270.29 42,810.87₹
242 Distribution Board - Factory Fabricated (ABB/MDS/ STANDARD/ HPL/ L&T (DBS-DOUBLE DOOR TYPE ONLY)Supplying and fixing 415 V, 4 way, 16-32A per way, TPN MCBDB with SS enclosuredouble-door with IP-42/43 protection with 63A Four Pole Isolators as incomer and 4 nos.32A TPN MCB ('C' Curve, 10 kA) as outgoings, concealed in wall after cutting the wall &mending good the damages to original finish incl. Inter connection with suitable size ofcopper wire and neutral link & provision for earthing attachment as per direction of EIC.(forbasement-1 no, Gnd Fl-1, 1st Fl-1, 2nd Fl-1, 3rd Fl-1 & 4th Fl-1).
6 No. ₹ 6,082.22 36,493.32₹ 243 Supplying and fixing 415 V, 6 way, 16-32A per way, TPN MCBDB with SS enclosure
double-door with IP-42/43 protection with 32A Four Pole Isolators as incomer and 32A FPRCCB, 100mA & 14 Nos. (6-32A) SPMCBs ('C' Curve, 10 kA) as outgoings, concealed inwall after cutting the wall & mending good the damages to original finish incl. Interconnection with suitable size of copper wire and neutral link & provision for earthingattachment as per direction of EIC.(for basement-3 no, Gnd Fl-3, 1st Fl-3, 2nd Fl-3, 3rd Fl-3 & 4th Fl-3). 18 Each ₹ 8,125.45 1,46,258.10₹
244 Supplying and fixing 415 V, 4 way, 16-32A per way, TPN MCBDB with SS enclosuredouble-door with IP-42/43 protection with 63A Four Pole Isolators as incomer and 4 nos.32A TPN MCB ('C' Curve, 10 kA) as outgoings, concealed in wall after cutting the wall &mending good the damages to original finish incl. Inter connection with suitable size ofcopper wire and neutral link & provision for earthing attachment as per direction of EIC.(forbasement-1 no, Gnd Fl-1 & 1st Fl-1). 3 Each ₹ 6,082.22 18,246.66₹
245 Supplying and fixing 415 V, 4 way, 16-32A per way, TPN MCBDB with SS enclosuredouble-door with IP-42/43 protection with 32A Four Pole Isolators as incomer and 32A FPRCCB, 100mA & 8 Nos.(6-32A) SPMCBs ('C' Curve, 10 kA) as outgoings, concealed inwall after cutting the wall & mending good the damages to original finish incl. Interconnection with suitable size of copper wire and neutral link & provision for earthingattachment as per direction of EIC.(for basement-3 no, Gnd Fl-3, 1st Fl-3 & 2nd Fl-1).
10 No. ₹ 6,082.57 60,825.70₹ 246 Supplying and fixing 415 V, 4 way, 16-32A per way, TPN MCBDB with SS enclosure
double-door with IP-42/43 protection with 63A Four Pole Isolators as incomer and 4 nos.32A TPN MCB ('C' Curve, 10 kA) as outgoings, concealed in wall after cutting the wall &mending good the damages to original finish incl. Inter connection with suitable size ofcopper wire and neutral link & provision for earthing attachment as per direction of EIC.(for2nd Fl-1, 3rd Fl-1 & 4th Fl-1). 3 Each ₹ 6,095.35 18,286.05₹
247 Supplying and fixing 415 V, 6 way, 16-32A per way, TPN MCBDB with SS enclosuredouble-door with IP-42/43 protection with 32A Four Pole Isolators as incomer and 32A FPRCCB, 100mA & 14 Nos. (6-32A) SPMCBs ('C' Curve, 10 kA) as outgoings, concealed inwall after cutting the wall & mending good the damages to original finish incl. Interconnection with suitable size of copper wire and neutral link & provision for earthingattachment as per direction of EIC.(for 2nd Fl-2, 3rd Fl-3 & 4th Fl-3). 8 Each ₹ 8,125.45 65,003.60₹
248 Supplying and fixing 415 V, 6 way, 16-32A per way, TPN MCBDB with SS enclosuredouble-door with IP-42/43 protection with 63A Four Pole Isolators as incomer and 63A FPRCCB, 100mA, 1 No. 32A TPN MCB & 11 Nos. (6-32A) SPMCBs ('C' Curve, 10 kA) asoutgoings, concealed in wall after cutting the wall & mending good the damages to originalfinish incl. Inter connection with suitable size of copper wire and neutral link & provision forearthing attachment as per direction of EIC.(for substation).
1 No. ₹ 8,125.45 8,125.45₹ 249 SECTION - 8.0 Point Wiring:
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated&unsheathedsingle core stranded copper wire (approved make) in 19 mm bore, 3 mm thickpolythen pipe (for horizontal & vertical run in wall and celing portion through prelaidpolythen pipe) complete with all accessories embedded in wall to light/fan/call bell pointswith Piano key type switch/bell push (approved make) fixed switch board with modular typebakelite/perspex (wall matching colour) top cover (3 mm thick) flushed/surface mounted inwall incl. mending good damages to original finish. All wire ends shall be lugged properlyand ferruled at both D.B. and S.B. end. - 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC.Average run 10 mtr.
1940 Point ₹ 1,098.38 21,30,857.20₹ 250 Wall Cutting & laying of conduit
Cutting channel of followings mm size on masonry wall incl. S&F heavy gauge polythenepipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GIWire fish wire incl. mending good damages to building works
250.1 Cutting channel of 40mm X 40mm size & 19 mm dia 3 mm thick polythene pipe withoutearth continuity wire 3000 RM ₹ 74.49 2,23,470.00₹
250.2 Cutting channel of 43mm X 43mm size & 25mm dia 3 mm thick polythene pipe withoutearth continuity wire 1500 RM ₹ 80.80 1,21,200.00₹
ELECTRICAL (LT DISTRIBUTION)
Sl. No. Item Description Quantity Unit Rate (Rs.) Amount (Rs.)238 Electrical Section: III (LT DISTRIBUTION)
Electrical Rising main & Tap off boxes Supply, erection, testing and commissioning of 630 Amps, FP internally earthed Al. RisingMain System, IP54, 50KA breaking capacity along with all necessary fabrication ofsupports and other accessories works complete as per specification, through theshaft/ceiling/wall of different floor as required including end feed units with MCCB & tap offboxes of rating as follows at every floor . All joints / tees bends / phase change over boxesetc are deemed to be included in the supply. Arrangement for future extention arrangementupto eight floor has to included and complete as required of make MDS-Legrand/C&S orapproved equivalent. 40 RM ₹ 17,594.20 7,03,768.00₹
251 Supplying and fixing 20mm size PVC Rigid Conduit 'FR' [Precision Make] on wall, ceilingwith saddles and other accessories as required and mending good damages to buildingworks (for basement) 300 RM ₹ 90.00 27,000.00₹
252 Wiring Accessories:Supplying & Fixing CRC sheet metal (16 SWG) JB-cum-Switch Board Modular type of thefollowing sizes complete with all accessories & wall matching colour modular top cover 3mm thick flushed/surface mounted in wall for housing the board after cutting the brick wallby sharp chisel incl. making earthing attachment, painting, necessary blanking plates andmending good damages to building works.(wiring for the same shall be paid in RM).
252.1 150 mm x 100 mm x 65 mm fit for 4 module 300 Each ₹ 257.55 77,265.00₹ 252.2 175 mm x 100 mm x 65 mm for 6module 200 Each ₹ 273.71 54,742.00₹ 253 Supply & Fixing 250 V 5 A Piano key type switch (approved make) on existing sheet metal
switch board having bakelite/perspex/ modular top cover by screws after making housingfor switch by cutting bakelite/perspex cover and making necessary connections as required
410 Each ₹ 30.30 12,423.00₹ 254 Supply & Fixing 250 V 15 A Piano key type switch (approved make) on existing sheet metal
switch board having bakelite/perspex/ modular top cover by screws after making housingfor switch by cutting bakelite/perspex cover and making necessary connections as required
160 Each ₹ 80.80 12,928.00₹ 255 Supply & Fixing 250 V 5A flush type plug socket (Anchor make), without switch & plug top,
on existing sheet metal switch board with modular/bakelite/perspex top cover by screwsafter making housing for plug by cutting bakelite/perspex top cover and making necy.connections with PVC wire and earth continuity wire 410 Each ₹ 45.45 18,634.50₹
256 Supply & Fixing 250 V 15A flush type plug socket (Approved make), without switch & plugtop, on existing sheet metal switch board with modular/bakelite/perspex top cover byscrews after making housing for plug by cutting bakelite/perspex top cover and makingnecy. connections with PVC wire and earth continuity wire 150 Each ₹ 85.85 12,877.50₹
257 Supplying & Fixing one way Circular box with cover suitable for PVC conduit on ceiling/wall1940 Each ₹ 27.78 53,893.20₹
258 Fixing only fan regulator on existing sheet metal switch board with bakelite/perspex topcover by screw after making housing for regulator knob by cutting bakelite/perspex topcover incl. making necy. connections etc. 10 Each ₹ 26.51 265.10₹
259 Supplying & Fixing of 20Amps, MCB protected socket with plastic enclosure(Havells CatNo. DHDTCSN0251020 for kichen & pantry use (wiring for the same shall be paid in RM).
20 Each ₹ 856.48 17,129.60₹ 260 SITC of Iron Clad Main switches on iron legs on wall, single phase, 30 / 32 Amps for UPS,
Substation, etc. (Make : L&T ) 2 Each ₹ 2,053.33 4,106.66₹ 261 Supplying & Fixing 250 V AC/DC superior type Call Bell (approved make) on board incl.
S&F board 15 Each ₹ 172.71 2,590.65₹ 262 MAINS : - for single phase sockets / SB to SB/ D.B. to D.B. / socket to UPS and UPS to
UPS DB/other uses.Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated& unsheathedsinglecore stranded copper wire (approved make) of the following sizes in the prelaid polythenepipe and by the prelaid GI fish wire and making necy. connection as required
262.1 3 x 22/0.3 (1.5 sqmm) in 19mm dia 3mm thick conduit 200 RM ₹ 60.60 12,120.00₹ 262.2 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC in 19mm dia 3mm thick conduit
600 RM ₹ 83.33 49,998.00₹ 262.3 2x56/0.3 (4 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC in 25mm dia 3mm thick conduit 400 RM ₹ 111.10 44,440.00₹ 262.4 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC in 25mm dia 3mm thick conduit 200 RM ₹ 185.59 37,118.00₹ 262.5 4x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC in 25mm dia 3mm thick conduit 100 RM ₹ 210.84 21,084.00₹ 262.6 4x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC in 25mm dia 3mm thick conduit 300 RM ₹ 321.94 96,582.00₹ 263 Lighting Fixures & Fans
Supply, Installation, testing & commissioning of standard light fittings and lightingaccessories and Fans including lamp.The scope shall include, providing of all hardwaresuch as downrod, nuts,anchor fastners, bolts, screws, chain, cleats, clamps, Lugs andconnection with 1.5asq.mm PVC insulated stranded copper wires / cables asrequired(CROMPTON GREAVES / BAJAJ / PHILIPS /Havells).Concealed type, 18W LED 4000K HAVELLS CAT No. 3031603, prismatic diffuser orequivalent model from approved makes for building use. 600 Each ₹ 7,244.73 43,46,838.00₹
264 Concealed type, Modular Down lite DL 12 SLIM upto 2 X 11W PL - C Fixture HAVELLSCAT NO. LHOC01218399 including fixing on surface / recess, etc. as required or approvedmake for building use. 995 Each ₹ 987.78 9,82,841.10₹
265 Surface type, Batten for T5, 2X28W FTL T5 light fixture HAVELLS CAT NO -LHIT01228051 as required for basement/other use or equivalent model from approvedmakes. 350 Each ₹ 2,370.47 8,29,664.50₹
266 Mirror optics OS series, surface mounted, 2 X 11W PL-S HF HAVELLS CAT NO. LHCCNB2211454 for toilet use or approved equivalent 130 Each ₹ 1,909.91 2,48,288.30₹
267 Surface mounted, Batten GOLD PCR, 2X28W FTL with cover, HAVELLS CAT NO.LHYF02236099 or approved make for substation inter use 15 Each ₹ 2,107.87 31,618.05₹
268 Concealed type IVY Mirror optic, 4 x 14 W FTL Square light fixture HAVELLS CAT NO -LHCTP - 1414349 or equivalent model from approved makes for building use. 95 Each ₹ 6,981.12 6,63,206.40₹
269 Recessed mounted, vertical downlite DL 53, 1 x 50W GLS / HAL spot luminaries (HavellsCat No. LHOL53160399) or equivalent model from approved makes(to be controlled by byDimmer controller) 90 Each ₹ 790.33 71,129.70₹
Sl. No. Item Description Quantity Unit Rate (Rs.) Amount (Rs.)238 Electrical Section: III (LT DISTRIBUTION)
Electrical Rising main & Tap off boxes Supply, erection, testing and commissioning of 630 Amps, FP internally earthed Al. RisingMain System, IP54, 50KA breaking capacity along with all necessary fabrication ofsupports and other accessories works complete as per specification, through theshaft/ceiling/wall of different floor as required including end feed units with MCCB & tap offboxes of rating as follows at every floor . All joints / tees bends / phase change over boxesetc are deemed to be included in the supply. Arrangement for future extention arrangementupto eight floor has to included and complete as required of make MDS-Legrand/C&S orapproved equivalent. 40 RM ₹ 17,594.20 7,03,768.00₹
270 Recess mounted downlighter for 1X150W MHDE fitting (Havells Cat No. LHOM22115399)or equivalent for reception ceiling (wiring to be paid in RM) 10 Each ₹ 1,711.95 17,119.50₹
271 White Footlight with 8 Module box & Lamp Holder and Footlight Cover 8 Module (Make :Crabtree) or approved make for auditorium use. 50 Each ₹ 1,313.00 65,650.00₹
272 Recess wall mounting luminaires, BEOPL 118 CFL, 'D' type 1 X 18W, or approved makefor ramp use (Make : Bajaj) 60 Each ₹ 2,357.34 1,41,440.40₹
273 Round surface mounting LED luminaires, BAJAJ CAT NO. 110947, BGCML 12 01 WHWhite for staircase use or approved equivalent. 50 Each ₹ 7,112.42 3,55,621.00₹
274 Integral Single / Double sided LED Signage with extruded aluminium hsg incorporateLEDs, driver, battery and otheraccessories. Matter is laser engraved on acrylic sheet. Chain is provided for pendentmounting for direction purpose(BAZAZ make). Or approved make. 15 Each ₹ 9,670.75 1,45,061.25₹
275 LED linear flood light luminaire, 9X1W Red/Green/White, Bajaj Cat No. 110778BGLR0901R for archetecture façade light. Or approved make. 15 Each ₹ 28,318.38 4,24,775.70₹
276 Supply of 48" sweep 240V A.C. ceiling fan (double ball bearing) complete with electronicregulator approve make with fork canopy and down rod, fan boxes, etc.(Make:Havells/Cromton/Pollar) or equivalent model from approved makes 10 Each ₹ 1,471.57 14,715.70₹
277 Supply of 400mm dia wall mounted bracket fan plastic body with grill and connecting upwith speed control regulator or equivalent model from approved makes. 200 Each ₹ 2,719.93 5,43,986.00₹
278 Supply of Exhaust Fans, 240V, 50HZ, double ball bearing with louvers, including makinghole to suit the size of fan, making good the damages, connection, testing, commissioning,etc. (Make:EPC/Crompton/Havells) or equivalent model from approved makes, as perspecifications and as required.
278.1 a) 300mm. Dia. 80 Each ₹ 4,128.88 3,30,310.40₹ 278.2 b) 450mm Dia (heavy duty type) 10 Each ₹ 6,921.53 69,215.30₹ 279 Supply of Heavy duty pedestal fan with all necessary electrical accessories complete in all
respects for operation with single phase 240 volts AC supply with the following features. 1.speed approximately of 1400 RPM 2. Sweep 600 mm. 3. Four / three blades 4. Powdercoated and painted 5. Height adjustment facility or equivalent model from approved makes
5 Each ₹ 12,032.13 60,160.65₹ 280 Fixing exhaust fan after making hole in wall and making good damages and smooth cement
finish etc. as practicable as possible and providing necy. length of PVC insulated wire andmaking connection for exhaust of dia;
280.1 30 cm 80 Each ₹ 293.15 23,452.00₹ 280.2 45 cm 5 Each ₹ 439.35 2,196.75₹ 281 Fixing only louver shutter/coul on wall with necy. bolts & nuts (6 mm dia x 62 mm long)
281.1 For 30 cm exhaust fan 80 Each ₹ 127.26 10,180.80₹ 281.2 For 45cm exhaust fan 5 Each ₹ 189.88 949.40₹ 282 Fixing cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long)
or as reqd. incl. S&F 24/0.20 PVC 200 Each ₹ 110.44 22,088.00₹ 283 Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F
connecting wire for down rod upto 30 cm incl. painting the rod with approved paint andmaking necessary connection as required by 2x1.5 sqmm flexible copper wire 10 Each ₹ 68.18 681.80₹
284 Telephone & computer networkingSupply and Laying of 25 mm dia. rigid FRLS category ISI marked PVC conduit of 2.0 mmwall thickness with all accessories complete with GI fish wire.(BEC/STEELCRAFT/AKG/SETIA) 1500 Rmt ₹ 41.66 62,490.00₹
285 SITC of 100 x 50 mm PVC raceway with partition to be fixed on wall with all necessaryaccessories like bends / couplers / end caps etc complete - makes MK / LK / Legrand
300 Metre ₹ 641.35 1,92,405.00₹ 286 Supply, Laying of followings pair 0.5 mm dia jelly filled armoured telephone cable.
286.1 100 pair 200 Metre ₹ 1,000.91 2,00,182.00₹ 286.2 20 pair 50 Metre ₹ 260.58 13,029.00₹ 286.3 10 pair 50 Metre ₹ 161.60 8,080.00₹ 287 Supply, Installation testing and commissioning of followings pair of telephone distribution
board complete with krone type tag block, etc. including terminations & connections.
287.1 100 pair 3 Each ₹ 4,442.99 13,328.97₹ 287.2 20 pair 2 Each ₹ 1,135.24 2,270.48₹ 287.3 10 pair 4 Each ₹ 570.65 2,282.60₹ 288 Supply, Installation testing and commissioning of RJ 11 telephone jack type socket with
box and plate complete. 221 Each ₹ 260.58 57,588.18₹ 289 Supply, Installation testing and commissioning of RJ 45 computer jack type socket with box
and plate complete. 98 Each ₹ 1,446.32 1,41,739.36₹ 290 Supply and laying/fixing/passing inprelaid conduit 2 pair telephone cable with 0.5mm dia
copper conductor, colour coded and twisted un-armoured telecommunication cable / Cat-6UTP cable & termination connection (Tyco / Krone) 111 Metre ₹ 17.17 1,905.87₹
291 Supply, Laying of Cat 6 computer wire inprelaid conduit/ raceway for data and voice 1178 Metre ₹ 26.26 30,934.28₹
Sl. No. Item Description Quantity Unit Rate (Rs.) Amount (Rs.)238 Electrical Section: III (LT DISTRIBUTION)
Electrical Rising main & Tap off boxes Supply, erection, testing and commissioning of 630 Amps, FP internally earthed Al. RisingMain System, IP54, 50KA breaking capacity along with all necessary fabrication ofsupports and other accessories works complete as per specification, through theshaft/ceiling/wall of different floor as required including end feed units with MCCB & tap offboxes of rating as follows at every floor . All joints / tees bends / phase change over boxesetc are deemed to be included in the supply. Arrangement for future extention arrangementupto eight floor has to included and complete as required of make MDS-Legrand/C&S orapproved equivalent. 40 RM ₹ 17,594.20 7,03,768.00₹
292 EarthingEarthing with Copper plate (610x610x3mm size) having weight of 9.84 Kg and 1 No.25x5mm Copper strip (3.20 mt long) & 1 no. 6 sqmm PVC insulated stranded Copper wire(4 Mt long) incl. S & F 15 mm dia GI pipe (ISI-Medium) protection (4 mt. long) to be filliedwith bitumen, partly under the ground level & partly above ground level to an averagedepth of 3.65 Mts. below the ground level and restoring the surface duly rammed incl.providing 3.0 mt long, 25 mm dia GI pipe (ISI-Medium) for periodic treatment, incl.providing masonery enclosure on the top of the earth electrode of overall size86.36x86.36x46cm deep (below Ground level) complete with cemented brick work (1:6) of25 cm width, duly plastered with cement morter (inside) CI hinged inspection cover of size36.56x35.56cm with locking arrangement, GI reducer and treatment of soil by using salt &charcoal or coke for plate electrode (for soft soil / morrum soil).
4 Set ₹ 12,555.31 50,221.24₹ 293 Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot
Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl.S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under theground level and partly above ground level driven to an average depth of 3.65 Mts. belowthe ground level & restoring surface duly rammed. 35 Set ₹ 1,677.41 58,709.35₹
294 Supply and fixing of 50X6mm. GI strip on surface for grid & equipment earth connections,etc. as required 500 Metre ₹ 212.10 1,06,050.00₹
295 Supply and fixing of 25X6mm. GI strip on surface for equipment earth connections, etc. asrequired 1000 Metre ₹ 138.17 1,38,170.00₹
296 Supply and fixing/connecting the equipments to earth busbar/earth electrode including (HotDip) wire of size 6 SWG on wall/floor with staples buried inside wall/floor or in prelaidconduit as required and making connection to equipments with bolts, nuts, washers, cablelugs etc. as required and mending good damages 1000 Metre ₹ 16.97 16,970.00₹
297 Supply and Laying of 25 mm dia. rigid FRLS category ISI marked PVC conduit of 2.0 mmwall thickness with all accessories complete with GI fish wire.(BEC/STEELCRAFT/AKG/SETIA) 600 Rmt ₹ 41.66 24,996.00₹
298 Supply and fixing of earth busbar of G. I. Flat 25mm. X 6mm. on wall having clearance of6mm. from wall including providing drilled holes on the busbar about 3 cm. apart completewith G. I. bolts, nuts, washers, etc. as required for tapping. 5 Metre ₹ 174.53 872.65₹
299 Supply and Laying of 25 mm dia. rigid FRLS category ISI marked PVC conduit of 2.0 mmwall thickness with all accessories complete with GI fish wire.(BEC/STEELCRAFT/AKG/SETIA) for earth continuity wire. 500 Rmt ₹ 41.66 20,830.00₹
300 Lightning Protection SystemS & F Lightning conductor Air-terminals made of 15 mm dia 1500mm long GI pipe (ISIMedium) having five prongs of 4 SWG GI (Hot Dip) wire at top with 85 mm dia 6 mm thickGI base plate at bottom incl. necessary holes etc. duly grouted on the parapet etc. in CCmortar (4:2:1) 8 Each ₹ 486.82 3,894.56₹
301 Supply & fixing GI (Hot Dip) strips 20 mm x 3 mm thick for horizontal run on theParapet/Roof/ Wall with GI Saddles 1100 mm apart incl. mending good the damages tobuilding works 300 Metre ₹ 68.28 20,484.00₹
302 Supply & fixing of GI (Hot Dip) strips 20 mm x 3 mm thick for vertical run on wall with GIsaddles spaced not exceeding 1000mm apart incl. mending good damages to building work
400 Metre ₹ 83.83 33,532.00₹ 303 Cutting cornices/ steps etc. including cutting recess in buildings etc. & supply & fixing 15
mm bore (ISI-Medium) GI pipe protection as below and mending good damages to thebuilding works for length upto 0.5 Mtr set 8 Set ₹ 85.85 686.80₹
304 Making soldered joints between conductor/ conductor & air terminals by 7/10 stranded GI(Hot Dip) wire incl. supply of jointing materials & painting with 2 (two) coats of Bituminouspaint 700 Metre ₹ 74.84 52,388.00₹
305 Supply & Fixing of Testing Joints by 20 mm x 3 mm thick GI (Hot Dip) strip 125 mm longgrouted on wall having clearance of 6 mm from wall for making connection with thimbles atthe end of 7/10 SWG GI (Hot Dip) stranded Wire and 4 SWG GI (Hot Dip) wire of verticalconductor and conductor from earth electrode complete with S & F thimbles, GI bolts, nuts,check-nuts, spring washers etc. as required 8 Each ₹ 195.94 1,567.52₹
306 Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (HotDip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl.S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under theground level and partly above ground level driven to an average depth of 3.65 Mts. belowthe ground level & restoring surface duly rammed. 10 Set ₹ 1,677.41 16,774.10₹
307 UPS & accessoriesSupply, installation, testing & commissioning of online 6 KVA UPS with 1 hours backupsealed maintenance free batteries.The work shall include tapping power from nearby SFUand providing single output with necessary paralleling kits and busbars. All wiring includingmaterials from battery to UPS / MCCB to UPS shall be part of vendors scope and allbatteries shall be SMF type.(TATA liberty/Autometer/pca/eton) or approved equivalent.
1 set ₹ 1,31,015.18 1,31,015.18₹ TOTAL = 1,54,55,886.00₹ ADD 8.44% 13,04,477.00₹ TOTAL = 1,67,60,363.00₹ ADD 0.40% 67,041.00₹ TOTAL 1,68,27,404.00₹
TOTAL =