MORE CARE. BUILT IN.
Ew160C / EC210CVOLVO EXCAVATORS
RECYCLING OPTIONS
22
VOLVO WASTE & RECyCLING SOLUTIONS
33
Sorting and loading with strength and intelligence. When you have to move, sort and load material as fast as possible, you won’t find a better solution than a Volvo wheel excavator or a Volvo crawler excavator.
These uncompromising machines bring together strength, intelligence, drivability and safety.
4
SPECIFICATIONS EW160C RECYCLING OPTIONS
Engine
Engine Power out atGross (SAE J1995)Net (ISO 9249, DIN 6271)Max. torque at 1 350 rpmNo. of cylindersDisplacementBoreStroke
Electrical system
VoltageBatteryBattery capacityAlternatorAlternator rating
Elevated cab
Hydraulically elevated cab, raising the operator‘s line-of-sight to more than 5,0 m.Set your optimum height for any task.Commanding view, safe entry and egress of cab in its lowest setting.Outstanding maneuvrability and stability in congested recycling yards.Easy maneuvering in small, densely filled, urban or inner-city indoor yards.
Overall height, cab at max. lifting height
Front overhang of cab, max.,length to tailFront swing radiusTail slew radius
Total machine weightswith elevated cab
Cab features
Sound Level:In cab, acc. to ISO 6396External, acc. to ISO 6395
UndercarriageDrive train:
Framework:Wheels:
Front axle:
Twin wheelsMax. tractive force (net)
Travel speed: on road with elevated cab limited to max. off road creepMin. turning radius
BrakesService brakes:
Parking brake:
Digging brake:
Security system:
Total machine weights
Total machine weights : with elevated cab Dozer blade front and outriggers rear
Dozer blade rear excl. outriggers
Front and rear outriggers
Service refill capacitiesFuel tankHydraulic system, totalHydraulic tankEngine oilEngine coolantTransmissionAxle differential: Front axleRear axleFinal drive, wet disc type
Hydraulic system
Parking mode (P):
Travel mode (T):
Working mode (W):
Customer mode (C):
Power Boost:
Hydraulic pumps:
Max. flows:
Main pump
Brake + steering pump
Servo pump
Hydraulic oil cooling fan + pilot pump
Max. pressure: ImplementsTravel systemPilot System
Slew system
Max slew speedMax. slew torqueFront swing radiusTail slew radius
Pictures Titlepage :Options
SPECIFICATIONS EC210C RECYCLING OPTIONS
Engine
Engine
Power out at
Gross (SAE J1995)
Net (ISO 9249, DIN 6271)
Max. torque at 1 350 rpm
No. of cylinders
Displacement
Bore
Stroke
Electrical system
Voltage
Battery
Battery capacity
Alternator
Elevated cab
Overall height, cab at max. lifting height
Front overhang of cab, max.,length to tail
Front swing radius
Tail slew radius
Total machine weight :with elevated cab
Cab features
Sound Level:In cab, acc. to ISO 6396
External, acc. to ISO 6395
Undercarriage
EC210C L / NL
Track pads
Link pitch
Shoe width, triple grouser
Shoe width, double grouser
Bottom rollers 2
Top rollers
Drive
Max. drawbar pull
Max. travel speed
Gradeability
Total machine weights
Total machine weight : with elevated cab
Service refill capacities
Fuel tank
Hydraulic system, total
Hydraulic tank
Engine oil
Engine coolant
Travel reduction unit
Axle differential: Front axle
Rear axle
Final drive, wet disc type
Hydraulic system
Summation system:
Boom priority:
Arm priority:
Slew priority:
Regeneration system:
Hydraulic motors:
Travel: Variable displacement axial piston motor
Slew: Fixed displacement axial piston motor
Relief valve setting: Implement 32,4/34,3 MPa
Pilot circuit 3,9 MPa
Travel circuit 34,3 MPa
Swing circuit 27,9 MPa
Hydraulic cylinders:
Mono boom 2 Bore x Stroke
1st boom of 2-piece boom 2 Bore x Stroke
2nd boom of 2-piece boom 2 Bore x Stroke
Arm 1 Bore x Stroke
Bucket 1 Bore x Stroke
ME bucket 1 Bore x Stroke
Slew system
Max slew speed
Max. slew torque
Front swing radius
Tail slew radius
m 2,0 2,45 2,6 3,1 2,95*
Dimensions EW160C RECYCLING OPTIONS
Elevated cab rear view; cab and outrigger down
Elevated cab mono boom in transport position Elevated cab mono boom in maximum overhang position Elevated cab mono boom in highest position
* Grab arm, without clamshell bucket, * * Without bucket. *** Machine equipped with 4 outriggers
Description Unit 5,0 m monoblock boom
1
J
J2
K
DescriptionUnit 5,0 m monoblock boom, arm :
1
M1
m 2,0 2,45 2,6 3,1 2,95*
Elevated cab rear view; cab and outrigger down
Elevated cab 2-piece boom in transport position Elevated cab 2-piece boom in maximum overhang position Elevated cab 2-piece boom in highest position
Description Unit 5,1 m 2-piece boom
1
J
J2
K
DescriptionUnit 5,1 m 2-piece boom, arm :
1
M1
Elevated cab driving position
m 2,0 2,5 2,9 3,5 4,2 2,0 2,5 2,9 3,5 4,2
2 2 2 2 2 2 2 2 2 2
2 2 2 2 2 2 2 2 2 2
2 2 2 2 2 2 2 2 2 2
4 4 4 4 4 4 4 4 4 4
2 2 2 2 2 2 2 2 2 2
2 2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3 3
4 4 4 4 4 4 4 4 4 4
2 2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3 3
2 2 2 2 2 2 2 2 2 2
4 4 4 4 4 4 4 4 4 4
m 5,7
m 2,0 2,5 2,9 3,5 4,2
3 3 3 4
EC210C
A
KJ
IB
EC210C
C1
N1P1
EC210C
CM
DNP
L
EC210C
C2
N2P2
Dimensions EC210C RECYCLING OPTIONS
Elevated cab rear view; cab and outrigger down
*Without shoe grouser. ** Machine equipped with 600 mm shoes and 4,2 tonnes counterweight. *** Machine equipped with 500 mm shoes and 4,8 tonnes counterweight.
DescriptionUnit
EC210C L,5,7 m monoblock boom; arm :
EC210C NL,5,7 m monoblock boom; arm :
1
2
1
2
1
2
DescriptionUnit Monoblock boom
DescriptionUnit Arm
Elevated cab mono boom in transport position Elevated cab mono boom in maximum overhang position Elevated cab mono boom in highest position
Includes bucket cylinder, linkage and pin
Includes arm cylinder, piping and pin
m 2,0 2,5 2,9 4,2 2,0 2,5 2,9 4,2
2 2 2 2 2 2 2 2
2 2 2 2 2 2 2 2
2 2 2 2 2 2 2 2
4 4 4 4 4 4 4 4
2 2 2 2 2 2 2 2
2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3
4 4 4 4 4 4 4 4
2 2 2 2 2 2 2 2
3 3 2 3 3 3 2 3
2 2 2 2 2 2 2 2
4 4 4 4 4 4 4 4
m 5,57
2
m 2,0 2,5 2,9 4,2
3 3 3
EC210C
A
KJ
IB
DP
EC210C
L1
M1
GH
F
E
N
C
Elevated cab rear view; cab down
Elevated cab 2-piece boom in transport position
DescriptionUnit
EC210C L,5,57 m 2-piece boom; arm :
EC210C NL,5,57 m 2-piece boom; arm :
1
2
1
M1
1
2
1
2
DescriptionUnit 2-piece boom
DescriptionUnit Arm
Includes bucket cylinder, linkage and pin
Includes arm cylinder, piping and pin
m 2,0 2,45 2,6 3,1 2,95* 2,0 2,45 2,6 3,1 2,95*
Working ranges & digging forces EW160C RECYCLING OPTIONS
DescriptionUnit 5,0 m monoblock boom, arm : 5,1 m 2-piece boom, arm :
* Grab arm
m 2,0 2,5 2,9 3,5 4,2 2,0 2,5 2,9 4,2
4 4 4
3 3 3 3 3 2 2 2 2
EC210C
HBA
F
G
C
D
E
2,44 m
EC210C
HBA
F
G
C
D
E
2,44 m
Working ranges & digging forces EC210C RECYCLING OPTIONS
DescriptionUnit 5,7 m monoblock boom, arm : 5,57 m 2-piece boom, arm :
Machine with direct fit bucket
Lifting capacity EW160C
Notes: 1. Working pressure with Power Boost = 36 MPa. 2. The above values are in compliance with ISO standard 10 567. They do not exceed 87 % of hydraulic lifting capacity or 75 % of tipping load, with the machine on firm, level ground. 3. Load capacities marked with an asterisk (*) are limited by machine's hydraulic lifting capacity rather than tipping load.
Reach from machine centre (u = support up / d = support down)
Lifting capacity EW160C
Notes: 1. Working pressure with Power Boost = 36 MPa. 2. The above values are in compliance with ISO standard 10 567. They do not exceed 87 % of hydraulic lifting capacity or 75 % of tipping load, with the machine on firm, level ground. 3. Load capacities marked with an asterisk (*) are limited by machine's hydraulic lifting capacity rather than tipping load.
Reach from machine centre (u = support up / d = support down)
Lifting capacity EW160C
Reach from machine centre (u = support up / d = support down)
Notes: 1. Working pressure with Power Boost = 36 MPa. 2. The above values are in compliance with ISO standard 10 567. They do not exceed 87 % of hydraulic lifting capacity or 75 % of tipping load, with the machine on firm, level ground. 3. Load capacities marked with an asterisk (*) are limited by machine's hydraulic lifting capacity rather than tipping load.
Lifting capacity EW160C
Reach from machine centre (u = support up / d = support down)
Notes: 1. Working pressure with Power Boost = 36 MPa. 2. The above values are in compliance with ISO standard 10 567. They do not exceed 87 % of hydraulic lifting capacity or 75 % of tipping load, with the machine on firm, level ground. 3. Load capacities marked with an asterisk (*) are limited by machine's hydraulic lifting capacity rather than tipping load.
Lifting capacity EW160C
Reach from machine centre (u = support up / d = support down)
Notes: 1. Working pressure with Power Boost = 36 MPa. 2. The above values are in compliance with ISO standard 10 567. They do not exceed 87 % of hydraulic lifting capacity or 75 % of tipping load, with the machine on firm, level ground. 3. Load capacities marked with an asterisk (*) are limited by machine's hydraulic lifting capacity rather than tipping load.
With many features specifically developed.
Volvo excavators push and load the profusion of recycling goods with outstanding efficiency and safety.
Lifting capacity EC210CL
Notes: 1. Working pressure with Power Boost = 36 MPa. 2. The above values are in compliance with ISO standard 10 567. They do not exceed 87 % of hydraulic lifting capacity or 75 % of tipping load, with the machine on firm, level ground. 3. Load capacities marked with an asterisk (*) are limited by machine‘s hydraulic lifting capacity rather than tipping load.
4
3
3
Lifting capacity EC210CL
Notes: 1. Working pressure with Power Boost = 36 MPa. 2. The above values are in compliance with ISO standard 10 567. They do not exceed 87 % of hydraulic lifting capacity or 75 % of tipping load, with the machine on firm, level ground. 3. Load capacities marked with an asterisk (*) are limited by machine's hydraulic lifting capacity rather than tipping load.
Lifting capacity EC210CNL
Notes: 1. Working pressure with Power Boost = 36 MPa. 2. The above values are in compliance with ISO standard 10 567. They do not exceed 87 % of hydraulic lifting capacity or 75 % of tipping load, with the machine on firm, level ground. 3. Load capacities marked with an asterisk (*) are limited by machine‘s hydraulic lifting capacity rather than tipping load.
Lifting capacity EC210CNL
Notes: 1. Working pressure with Power Boost = 36 MPa. 2. The above values are in compliance with ISO standard 10 567. They do not exceed 87 % of hydraulic lifting capacity or 75 % of tipping load, with the machine on firm, level ground. 3. Load capacities marked with an asterisk (*) are limited by machine's hydraulic lifting capacity rather than tipping load.
22
STANDARD EQUIPMENT EW160C RECYCLING OPTIONS
Engine
Electric / Electronic control system
Undercarriage
Superstructure
Digging equipment
Cab and interior
Hydraulic system
OPTIONAL EQUIPMENTEngine
Electric
Hydraulic system
Cab and interior
‘Elevated Cab’H ydraulically elevated cab,
maximum lifting height 5,6 m (Max. travel speed 20 km)
Undercarriage
Digging equipment
Hydraulic quick fit
Attachments
Service
23
STANDARD EQUIPMENT EC210C RECYCLING OPTIONS
Engine
Electric / Electronic control system
Hydraulic system
Superstructure
Cab and interior
Undercarriage
Track shoes
Digging equipment
Service
OPTIONAL EQUIPMENT
Engine
Electric
Hydraulic system
Cab and interior
‘Elevated Cab’H ydraulically elevated cab,
maximum lifting height 5,6 m
Undercarriage
Digging equipment
Service
Ref. No. VOE21D1005071 EnglishPrinted in Sweden 2009-09 EXC Volvo, Konz
Not all products are available in all markets. Under our policy of continuous improvement, we reserve the right to change specifications and design without prior notice. The illustrations do not necessarily show the standard version of the machine.
More care. Built in.