VPN Howto Pptp l2tp on Windows 2003 Theam Dara

By THEAM DARA, [email protected]

HOW TO CREATE SITE TO SITE VPN (L2TP)

ENABLE VPN AND REMOTE ACCESS SERVICE1- we do on “Routing and Remote Access console”

2- choose service you want to enable


3- choose what you need

4- select the interface connect to internet and disable stateful firewall


5- select the source ip that server will provide to client

6- create ip range for client – if we use automatic we don’t need to create it will choose from dhcp server


7- we choose to get the authenticate source from the vpn server, or we can choose from RADIUS server

8- finish enable vpn remote access server

=== NOTE === Completing this step, you can use Remote Access client (PPTP) to connect to server

EXAMPLE TO MAKE A CONNECTION TO SERVER ON WINDOWS XP


1- select to “network connection”

2- create new vpn connection


3- follow through

4- follow trough


5- name your connection

6- follow through


7- enter your server ip

8- then follow the screen until finish

=== YOU GET A INTERFACE TO YOUR VPN SERVER BUT YOU HAVE TO HAVE A USER NAME AND PASSWORD TO CONNECT TO IT ===

THE USER ACCOUNT MUST ENABLE ON SERVER IN ORDER TO DAIL IN. DO SHOW1- we use computer management console


2- double click on user that you allow to dail in

3- in dail-in tab select “allow access “

=== NOW YOU ARE READY TO DAIL-IN USING USER DARA ===


1- double click on your new interface you just created in “Network Connections” named “my workplace at Phnom Penh”

2- when you finish you will see the result

=== FINISH REMOTE ACCESS CONNECTION (PPTP) ===


NOW I PROCEED TO SITE TO SITE CONNECTION (L2TP)

- I will edit the above server to make it became site-to-site vpn server- You need to have 2 server to make it work

MAKE IT TO BECAME SITE-TO-SITE SERVER

1- we still use “routing are remote access” console


2- select security tap to add PRE-SHARED KEY phrase

3- do like this on both servers

=== WE HAVE TO ADD STATIC ROUTE TO MAKE CLIENT ON BOTH CAN COMMUNICATE WITH EACHE OTHER ===

ADD STATIC ROUTE IN ORDER TO MAKE BOTH LOCAL NETWORK CONNECT EACH OTHER

Vpn1 internet

Vpn2192.168.4.2inside

172.16.138outside

172.16.1.153outside

192.168.5.1inside


1- we still use “routing and remote access” console

2- add the route on vpn2 from lan on vpn2 to lan on vpn1

3- do this also on vpn1

=== FINISH CONFIGURE ON BOTH SERVER SO IT CAN USE SITE-TO-SITE VPN ====== NOTE WE HAVE TO DIAL ON BOTH SERVER TO EACH OTHER, BUT LOCAL NETWORK ON BOTH SITES CAN COMMUNICATE WITH EACH OTHER ===


MAKE L2TP INTERFACE

1- it is the same as the one we created above, but only a little configure to make it become L2TP interface

2- on security tab type the PRE-SHARED KEY phrase


3- do this on other vpn too, then dial-in on both servers

=== AFTER DAIL-IN ON BOTH SERVER YOU WILL HAVE THIS RESULT ===

================FINISH BOTH PPTP AND L2TP VPN===================

ANY CONSULTANT CONTACT [email protected]

===========================================

mailto:[email protected]

Date post:	18-Nov-2014
Category:	Documents
Upload:	theam-dara
View:	120 times
Download:	1 times

VPN Howto Pptp l2tp on Windows 2003 Theam Dara

Documents