1

Age: 14+INSTRUCTION MANUAL

VR AUTOFLIGHT

Thank you for purchasing the VR DRONE AUTOFLIGHT! To use it correctly and to ensure your own safety, please read the instruction manual carefully before you start using it and keep it for future reference.

2.4GHz

WARNINGINDEX

PRECAUTIONS AND SAFETY WARNINGS

BOX CONTENT

1. This aircraft is not a toy. It is an equipment that integrates precise electrical and mechanical components with an aerodynamic design that emits high-frequency signals. It is necessary to manipulate it (assembly and dismantling) correctly, in order to avoid any accidents. The owner must fly it and control it with due regard to minimum safety standards.

2. JUGUETRÓNICA is not responsible for any damage that may suffer the owner due to misuse.

3. This aircraft requires certain knowledge of piloting and flying experience and the age of 8 years.

4. After purchasing the product, JUGUETRÓNICA is not responsible of the security of the owner or of the environment while the aircraft is being flown by its owner.

5. If you detect any malfunction, contact the establishment where you purchased the drone.

This drone has hazardous parts, so it is important to consider the following recommendations:You should always maintain eye contact with your drone not exceeding, in any case, the 120m high. The video signal won´t work propperly up to 50m.Although it is not necessary to be a professional pilot, you must always fly safely.You can fly your drone only in areas suitable for this as flight camps or unpopulated areas.The damage to the drone is the responsibility of who handles.You can never:Flying in urban areas.Fly over crowds of people: parks, beaches, concerts, events, etc.Flying night.Fly near airports, airfields, etc.Flying in areas where conduct flights with other low-altitude aircraft (paragliding, parachuting, heliports, etc).Do not expose others to danger.For more information visit: www.seguridadaerea.gob.es

Important notice

Box contents

Drone parts

How to place the battery and propellers in the drone

Flight controls

Flight speeds

Precautions and warnings

Functions of the transmitter

How to place the batteries in the transmitter

Precautions and How to charge the drone battery

Synchronisation and start-up

Automatic Departure and landing

Trimming

Acrobatic mode

Return home

Smartphone use

Videos and photos with your VR Drone Autoflight

Headless

Tips to learn to fly

Troubleshooting

FPV Experience with the VR Drone Glasses

Online content

3

3

5

6

9

10

11

12

13

13

14

15-16

3

4

6

7

8

9

10

12

17

17

3

WARNING

PRECAUTIONS AND SAFETY WARNINGS

BOX CONTENT

1. This aircraft is not a toy. It is an equipment that integrates precise electrical and mechanical components with an aerodynamic design that emits high-frequency signals. It is necessary to manipulate it (assembly and dismantling) correctly, in order to avoid any accidents. The owner must fly it and control it with due regard to minimum safety standards.

2. JUGUETRÓNICA is not responsible for any damage that may suffer the owner due to misuse.

3. This aircraft requires certain knowledge of piloting and flying experience and the age of 8 years.

4. After purchasing the product, JUGUETRÓNICA is not responsible of the security of the owner or of the environment while the aircraft is being flown by its owner.

5. If you detect any malfunction, contact the establishment where you purchased the drone.

This drone has hazardous parts, so it is important to consider the following recommendations:You should always maintain eye contact with your drone not exceeding, in any case, the 120m high. The video signal won´t work propperly up to 50m.Although it is not necessary to be a professional pilot, you must always fly safely.You can fly your drone only in areas suitable for this as flight camps or unpopulated areas.The damage to the drone is the responsibility of who handles.You can never:Flying in urban areas.Fly over crowds of people: parks, beaches, concerts, events, etc.Flying night.Fly near airports, airfields, etc.Flying in areas where conduct flights with other low-altitude aircraft (paragliding, parachuting, heliports, etc).Do not expose others to danger.For more information visit: www.seguridadaerea.gob.es

Box Content:1 x VR Autoflight 1 x VR Drone Glasses 4 x Spare propellers1 x 2,4Ghz transmitter1 x AC/DC adapter1 x Charger1 x Screwdriver4 x Propeller protections1 x microSD +USB reader1 x Instruction Manual1 x Lipo Battery

PARTES DE LA EMISORA

1: Emergency stop when both buttons pressed2: Speed3: Throttle stick/ rotation4: Power Trim5: Rotation Trim6: Automatic Departure and Landing7: Return Home8: Headless9: Smartphone holder10: Acrobatic mode 11: ON / OFF12: Direction Stick13: Direction Trim (forward Backward)14: Direction Trim (left and right15: Photo (microSD)16: Video (microSD)17: Mode 1/2/3/4. 17 + TURN ON [11]: Pressing the button will change the controls of the joystick: Ex. MODE 1: With the right one [12], you will control the direction (forward and backward) and rotation (left and right), and with the left one [3], the power (up / down) and the lateral displacements (right / left).

Mode indicator

Power indicator

Speed Indicator

Light Indicator

Forward and backward Trim indicator

Left and right trim indicator

Speed Trim indicator

Rotation trim indicator

Batteries indicator (remote)

FUNCTIONS OF THE TRANSMITTER

1

2

3

45 6

87

11

12

1314

10

L H

9

17

1516

THIS MANUAL EXPLAIN HOW TO USE MODE 2

5

DRONE PARTS

1: Screwdriver hole (propellers sustitution)2: Propeller type indicator3: Light4: Motor5: Camera6: Protectors 7: Protectors holder8: Propellers9: Battery charge indicator10: Battery11: ON/OFF Button

12

3

4 56

7

89

1011

A B

A: MicroSD slot

B: Rechinable camera

INSTALACIÓN DE LAS PILAS EN LA EMISORA

4 x AA | 1,5V

Use the screwdriver to open the cover. Insert 4 “AA” batteries in total (not included) and replace the battery cover.

1. Observe correct polarity when inserting the batteries.2. Do not mix new batteries with old ones.3. Do not mix different types of batteries.

HOW TO PLACE THE BATTERY AND PROPELLERS IN THE DRONE

HOW TO PLACE THE BATTERIES IN THE TRANSMITTER

PRECAUTIONS FOR BATTERY CHARGING

Insert the battery and push downwards into the VR Drone Autoflight until you hear a click.

Use the supplied screwdriver to remove the screw from the top to be able to remove the propeller. Now use the system of arrows to orient yourself and determine the position in which each propeller should go.

To remove it, press the striped tab and pull the battery out.

7

INSTALACIÓN DE LAS PILAS EN LA EMISORA CÓMO CARGAR LA BATERÍA

Use the power adapter and charger supplied. Plug in the charger and get ready to insert the battery.1. The green light will illuminate when the charger is plugged into the mains.2. When you insert the battery and the drone starts to charge, the red light will turn ON.3. When charging is complete, the red light will turn off.

1. Land the drone and press the OFF button twice to turn off the drone.2. Be sure to let the drone rest for at least 20 minutes to cool off the battery.

CHARGE OF THE BATTERY OF THE DRONE

PRECAUTIONS FOR BATTERY CHARGING

1. During charging, place the battery and charger in a dry, ventilated area away from sources of intense heat or flammable products.

2. During charging, disconnects the battery of the drone. It is important that the battery charge be supervised by an adult to prevent accidents.

3. Do not charge the battery as soon as you finish flying. Wait for the battery to cool down, otherwise the battery may swell, explode or burn.

4. ensured you to use the original USB charger provided with the drone. When you’ve used enough battery or see it’s a little swollen, exchange the battery for another.

5. A battery that is not used for a long period of time lose their charge.

Charge or discharge a battery often shortens its lifetime.

BATTERY MAINTENANCE1. The battery must be placed in a dry, ventilated place at room temperature between 18 and 25º C.

2. To make the most of the life of your battery, avoid performing repeated loads or ecessivas discharges.

3. When you are storing the battery for a long period of time, and first charges the battery with the umbrella at least 50-60% of the total load allowed.

4. If you are not using it for more than a month, it is recommended to measure it the battery voltage each month to assure you that is not below 3V. Otherwise back to point number 3.

The flight time varies, around 15 minutes and, the load, about 220-250 minutes.

When the drone lights flash, the battery is about to run out.

Use the supplied screwdriver to remove the screw from the top to be able to remove the propeller. Now use the system of arrows to orient yourself and determine the position in which each propeller should go.

Battery

Power adapter

Charger

AJUSTES DEL SOPORTE EN LA EMISORAPUESTA EN MARCHA

PRECAUTIONS1. When the transmitter’s LED stays on but the drone’s LED blinks slowly, it is an indication that the synchronization has not been successful. Turn the transmitter and drone off and perform the “start-up” again from the beginning.

2. If when you start flying, the drone does not maintain stability, land, turn off the transmitter and the drone and synchronize again paying close attention to the drone being placed on a flat, horizontal surface to the floor.

3. When the drone’s LED slowly blinks, it means that the battery is running low. Land and put the drone’s battery to charge with the USB charger provided.

Posiciónhorizontal

TIP:

When you synchronize your VR NANODRONE AUTOFLIGHT make sure it is on a flat and horizontal surface, so the flight is stable

1. Turn on the VR DRONE AUTOFLIGHT

You will find the ON button at the top of the drone, pressed the button and leave the drone blinking on a flat surface. In orther to turn it off, press the button two times or for a couple of seconds

3. Raise power level to the max, then, lower it to the lowest position.

The transmitter will issue a prolonged beep which is the signal that transmitter and drone are synchronized. Lights will stop blinking

2. Turn on transmitter by pressing the on/off button. The transmitter will beep 1 time and the LCD will come on and

keep blinking.

4. Push both levers simultaneously and diagonally inward and downward, as shown in the image. The drone unlocks, and the motors will be ready to launch. Just push the left lever up, so the drone rises. Keep in mind that the drone rises between 1 and 3 meters. To avoid collision, give the power lever down a few taps to stop the climb.

ON/OFF

DRONE SYNCHRONIZATION AND DEPARTURE

UP AND DOWN

RIGTH AND LEFT ROTATION

Autocalibration with both Levers

9

PUESTA EN MARCHA

1. When the transmitter’s LED stays on but the drone’s LED blinks slowly, it is an indication that the synchronization has not been successful. Turn the transmitter and drone off and perform the “start-up” again from the beginning.

2. If when you start flying, the drone does not maintain stability, land, turn off the transmitter and the drone and synchronize again paying close attention to the drone being placed on a flat, horizontal surface to the floor.

3. When the drone’s LED slowly blinks, it means that the battery is running low. Land and put the drone’s battery to charge with the USB charger provided.

MOVEMENTS CONTROL

UP AND DOWN

RIGTH AND LEFT ROTATION LATERAL DISPLACEMENTS

FORWARD AND BACKWARD

Move up the power lever (left) to the drone go up. Lowers the power lever (left) to the drone down.

Move the power lever (left) to the right or left so that the drone turn to the corresponding side.

Move the steering control lever right or left: The drone will fly in the corresponding direction.

Move the steering control lever up or down: The drone will move forwards or backwards.

AUTOMATIC LANDING AND DEPARTUREThere is a button on the controller that allows the pilot to take off and land automatically. Just press it and you will see how the drone takes off or lands autonomously. After starting the take-off process, the drone will rise up to a height between 1 and 3 meters. The pilot must be careful not to collide with anything. The left stick should be kept down so that the drone stops ascending automatically. The landing takes place slowly.

Landing/ Departure

CONTROL DE MOVIMIENTOS MODO VUELO 2

It is normal for a drone to never stay in a fixed place. Although it is rare, the drone may sometimes perform unrequested movements without your direct intervention, moving in any of the four directions, rotating on its axis, or even moving up or down without being given any order. Therefore, there is the Trimming feature, an adjustment that we can make from the transmitter so that the drone remains as steady as possible.

When the Drone is moving in one direction, we should press the trimming button for the op-posite direction, as many times as necessary to correct that unwanted movement.

POWER TRIM

When the drone ascends or descends abruptly without touching the power lever, you can correct it by pushing the buttons up and down to stabilize the drone.

TRIMMING OF TURNS LEFT RIGHT

When the drone rotates in an uncontrolled way, you can correct the flight by pressing the right or left turn trimming button, as appropriate.

TRIMMING

FLIGHT SPEEDS

When you press the button, the drone will change its speed and offer greater power. So the drone will move faster and be more sensitive to the slightest of movements we make with the control sticks. More power also helps the drone handle strong gusts of wind.

How to change speeds

TIP: If you are learning to fly, start with Speed 1 and follow the exercises explained in this manual until you master them. For static aerial recording, use speed 1 and perform very smooth movements with the steering controls, so that the drone moves in a progressive manner. If you need to record a moving object, use speed 2.

11

TRIMMING OF LATERAL DISPLACEMENT

When the drone tends to move to the sides incorrectly, you can correct the flight course by pressing the left or right movement trimming button, as appropriate.

TRIMMING OF FORWARD AND BAC-KWARD

When the drone advances and recedes incorrectly, you can correct the flight by pressing the forward or reverse trimming button, as appropriate.

PHOTO AND VIDEO WITH YOUR VR DRONE AUTOFLIGHT

PHOTOGRAPHS AND VIDEO: By pressing the upper button you can take a photograph. With the lower one, you will start the video recording. Press the button again to stop recording. The drone records to the microSD card if it is placed on the camera in HD quality: 1280x720p at variable fps.The VR Drone Autoflight can record on an 8Gb card. The photos have the same resolution.

USING THE APP

On the smartphone app you will find an icon for taking pictures and another icon for recording videos. Additionally, from the icon you will be able to view the images and videos you have taken, which will be stored on the smartphone. You will need to enable the appropriate permissions to the APP when it requests it. When recording from the APP, the drone will send the image and video signal live, therefore, the video quality is 720x576 at variable FPS.

MORE INFORMATION ABOUT THE USE OF THE APP ON PAGE 13

While the drone is operating in the normal way, without headless, the pilotmust master which is the front and rear of the drone, as well as the side, so that,during the flight provides the correct order of movements. In this flight mode whenthe drone face you it is to know that the controls are reversed. The VR NANODRONE AUTOFLIGHT integrates a complete control system that is much simpler to piloting.

When the headless mode is on, the direction of the dronedoes not influence the movements since the drone movestowards its own direction.To activate the mode absolute control press the button shownon the right side image.To disable this mode, simply press it again.

HEADLESS MODE

ACROBATIC MODEThe VR drone Autoflight is able to make acrobatics almost automatically. We will have to press the button marked to enter “acro-batic mode.” In this mode, when moving the right stick in any direction, you will give the command to the drone to perform the acro-batics in that direction.Keep in mind that performing acrobatics takes a lot of battery life.Performing them with the VR Drone Glasses put into FPV vision can make you dizzy. It is not advisable to do so. Finally, it is possible that the drone loses height when performing the acrobatics, so that it does not reach the ground, touch smoothly the power stick upwards at the end of the acrobatics.With the protections in place, the drone may have difficulty performing them perfectly.

Press once

2s

13

RETURN HOME

Press once

FPV EXPERIENCE WITH THE VR DRONE GLASSES

The VR Drone Autoflight includes glasses to perform flight in FPV mode, i.e. control the drone by seeing what the drone camera sees. In this case, we have chosen a camera with a wide angle so that the field of vision is very wide. In this way, the pilot will have a knowledge of the surroundings good enough to fly without risk of colliding with objects in the area.To activate this mode you must follow the following steps:1.- First, turn on the drone and perform the synchronization normally. (Pag8)2.- Connect to the drone Wi-Fi (page 14) and open the application.

Now you can start piloting your drone. Keep in mind that if you record directly on your mobile while you are piloting, you will see loose connection at times, usually when the drone is more than 20 meters away or due to local interference.The transmission of the image is done by Wi-Fi, so the further away the drone is from us, the greater delay we will see in the image. If the drone goes too far, we will lose the signal, so it is important that you do not keep the drone too far and know the area where you are piloting, so you can rescue your drone if you lose the signal and suffer a hard landing.

Press theOptions button.

Open the smartphone holder.

Enter it with the split screen enabled.

Adjust the lenses to your liking.

Turn splitscreen on.

If you need to, rotate the screen.

Automatic return

Start

End

Press the “return home” button, the transmitter will beep and the drone will return in a straight line in the opposite direction to the one it had at the beginning of the flight. You can move the lever to the right to correct the course if the drone is off course. Press the “home” button again or move the lever to the right, the station will beep again and the drone will end the return.

ATTENTION: Please note that the drone takes its orientation reference considering its position at commissioning. If you fly the drone at start-up and place it behind you, when executing the “automatic return home” the drone will move away instead of towards you, since it will consider that you are flying towards the front versus its initial positioning.

EXERCISE 2- HOW TO MOVE IN A PARTICULAR DIRECTIONOnce static flight has been mastered, you can begin to move the drone around, and not simply in static mode. Maintaining the height, push the right lever forwards, and the drone will move towards that direction. After advancing a few meters, push the right lever down to make the drone move back to the starting point. As you move, you will have to correct the lateral displacement, so this exercise is very useful to learn not to hit walls or obstacles. So you have to focus to be able to pilot the drone in the direction of your choice, and, at the same time, you have to maintain the height. Therefore, in addition to these piloting movements, you have to pay attention to the power applied, increasing or reducing it as required so that the drone is always located at eye sight. The real challenge of this exercise is to dominate it in such a way that we can perform “eights” in the air using only the right lever, playing with all the movements controlled by that lever.

SMARTPHONE USE

CONTROL STICKS TRIM

Activate the Wi-Fi of your mobile device (smartphone not included) and look for “JUGUE-TRONICA_VR” establish connection and open the application “VR DRONE AUTOFLIGHT” (download by QR at the end of this manual). Accept that the APP accesses the Wi-Fi. In the first screen you will see three buttons, The interrogation opens a help screen. The gear basic settings (such as 720p retransmission). And the Play button gives access to device control through the application.If we want to control the drone flight through the APP we will not have to synchronize it with the 2.4Ghz controller. If we just want to use it as

3D VIEW

AUTOMATIC LANDING

AUTOMATIC TAKEOFF

CALIBRATE GYROSCOPE

SHOW/HIDE IN-TERFACE

TAKE PHOTO

TRACING THE ROUTE

RECORD VIDEO

GALLERY

SETTINGS

ACROBATICS

SPEEDS

GRAVITY SENSOR MODE CAMERA SETTINGS

15

TIPS TO LEARN TO FLY

EXERCISE 1- HOW TO KEEP THE DRONE HOVERING UP IN THE AIRSynchronize the station with the drone and get ready to take it off. Start the engines and give them power with the left lever with a continuous touch. The drone should rise and stay at a height thanks to its visual positioning feature. Use the left lever with soft touches to bring the drone to your eye level. This exercise is very easy to do thanks to the drone automatisms. Sometimes it is necessary to increase or reduce power, but these changes must always be subtle, with slight touches on the lever. You must adjust the lateral movements to keep the drone always in front of you. If you notice that the drone tends to move only in a particular direction, trim it. Although up to 8 meters it will remain almost fixed thanks to the visual positioning feature, above that height you will need to control position and lateral movements manually.

EXERCISE 2- HOW TO MOVE IN A PARTICULAR DIRECTIONOnce static flight has been mastered, you can begin to move the drone around, and not simply in static mode. Maintaining the height, push the right lever forwards, and the drone will move towards that direction. After advancing a few meters, push the right lever down to make the drone move back to the starting point. As you move, you will have to correct the lateral displacement, so this exercise is very useful to learn not to hit walls or obstacles. So you have to focus to be able to pilot the drone in the direction of your choice, and, at the same time, you have to maintain the height. Therefore, in addition to these piloting movements, you have to pay attention to the power applied, increasing or reducing it as required so that the drone is always located at eye sight. The real challenge of this exercise is to dominate it in such a way that we can perform “eights” in the air using only the right lever, playing with all the movements controlled by that lever.

Activate the Wi-Fi of your mobile device (smartphone not included) and look for “JUGUE-TRONICA_VR” establish connection and open the application “VR DRONE AUTOFLIGHT” (download by QR at the end of this manual). Accept that the APP accesses the Wi-Fi. In the first screen you will see three buttons, The interrogation opens a help screen. The gear basic settings (such as 720p retransmission). And the Play button gives access to device control through the application.If we want to control the drone flight through the APP we will not have to synchronize it with the 2.4Ghz controller. If we just want to use it as

TROUBLESHOOTING

The third step involves the total mastering of the previous exercises. It is not easy, and it usually takes several weeks of practice to complete it successfully.The exercise consists of a mixture of all the previous exercises. The idea is to perform “eights” (or the symbol of infinity) up in the air with your drone, but unlike exercise 2, in this case the drone should always make this movement facing the front.To achieve this you must keep the drone at a given height. Then begin to move it diagonally using the right lever while you indicate the direction using the left lever. Once you reach the point at which you want to turn back, begin the rotation of the drone on its axis to the left. Once a 180 degree turn is completed, stop rotating it on its axis and start moving it towards your position. Once it gets closer, begin to rotate it to the right and repeat the process until obtaining several “eights” in a row.

TIPS TO LEARN TO FLY

EXERCISE 3 - HOW TO ROTATEThe rotation is the most complicated movement when it coms to flying drones. When rotating the drone, it is normal to get confused with the directions, since if the drone is facing front, the controls of the transmitter correspond to what you can see (if we turn to the right, the drone moves to the right). But if the drone is facing us, the controls are reversed, because when you command it to go right, it will go to its right, that is, your left.The first step is to keep the drone at a given height, and using the very same power lever, to maintain that power while turning to the right or left. The drone will begin to rotate on its axis, and depending on how skilful you are, it will ascend or descend. The challenge is to perform circles fixed at a given point in height.Now, let’s perform exercise 2 but now let’s perform the turn with the drone facing towards us. That is, to move forward normally, stop the drone, rotate it 180º, and bring it back.The third step is to perform the first step but with a slower rotation and applying some frontal movement using the right lever. It is advisable to do this exercise in an open area, as the goal is to perform wide circles with the drone. You can activate the recording and stand in the central area of the circle you will be performing, so to record yourself at all times. Remember to do this in an open area with no obstacles.

17

TROUBLESHOOTING

ONLINE CONTENT

juguetronica.com/extras/vr-drone-autoflight

SCAN THE QR CODE TO DOWNLOAD THE APP

Requires iOS 6.0 or higher. Compatible with iPhone, iPad and iPod touch. Requires Android

2.0 and above.

The third step involves the total mastering of the previous exercises. It is not easy, and it usually takes several weeks of practice to complete it successfully.The exercise consists of a mixture of all the previous exercises. The idea is to perform “eights” (or the symbol of infinity) up in the air with your drone, but unlike exercise 2, in this case the drone should always make this movement facing the front.To achieve this you must keep the drone at a given height. Then begin to move it diagonally using the right lever while you indicate the direction using the left lever. Once you reach the point at which you want to turn back, begin the rotation of the drone on its axis to the left. Once a 180 degree turn is completed, stop rotating it on its axis and start moving it towards your position. Once it gets closer, begin to rotate it to the right and repeat the process until obtaining several “eights” in a row.

EXERCISE 3 - HOW TO ROTATEThe rotation is the most complicated movement when it coms to flying drones. When rotating the drone, it is normal to get confused with the directions, since if the drone is facing front, the controls of the transmitter correspond to what you can see (if we turn to the right, the drone moves to the right). But if the drone is facing us, the controls are reversed, because when you command it to go right, it will go to its right, that is, your left.The first step is to keep the drone at a given height, and using the very same power lever, to maintain that power while turning to the right or left. The drone will begin to rotate on its axis, and depending on how skilful you are, it will ascend or descend. The challenge is to perform circles fixed at a given point in height.Now, let’s perform exercise 2 but now let’s perform the turn with the drone facing towards us. That is, to move forward normally, stop the drone, rotate it 180º, and bring it back.The third step is to perform the first step but with a slower rotation and applying some frontal movement using the right lever. It is advisable to do this exercise in an open area, as the goal is to perform wide circles with the drone. You can activate the recording and stand in the central area of the circle you will be performing, so to record yourself at all times. Remember to do this in an open area with no obstacles.

The drone does not respond to commands from the transmitter.

1. The drone does not have enough battery.2. The transmitter does not have enough battery.3. The transmitter frequency does not match the drone frequency.

1. Charge the drone.2. Replace the batteries on the transmitter.3. Re-synchronise the transmitter and the drone.

PROBLEM ROOT CAUSE SOLUTION

The drone is slow to respond or responds to the transmitter commands with difficulty.

When attempting to take-off, the drone activates the propellers but fails to take-off.

1. The drone does not have enough battery.2. The propellers are not placed correctly.3. The engine fails.

1. The transmitter does not have enough power.2. There is another radio-frequency equipment nearby with the same control frequency.

1. Replace the battery on the transmitter.2. Remove the other radio-frequency equipment from the drone coverage area.

1. Charge the drone.2. Check the placement of the propellers (p.6).3. Come to our SAT After Sales Service to see if we can find a solution.

Garantía y Servicio Técnico Nacional.

Tienda y Servicio Post-venta en: C/ Alberto Aguilera, 1 - 28015 Madrid - España

JUGUETRÓNICA, SL - NIF: B83788414Thank you for purchasing this product.

URL: juguetronica.com/extras/vr-drone-autoflight