Date post: | 23-Oct-2016 |
Category: |
Documents |
Upload: | cmchemical81 |
View: | 49 times |
Download: | 12 times |
FRAME AND BUILT SPINDLE CARRIAGE ASSEMBLY CALIBRATION GUARDING
AN ISO 9001 : 2008 CNC MACHINES MANUFACTURER IN INDIA
CAREER | INQUIRY | SITEMAP
CNC TURNING CENTERS
GX-100HIGH QUALITY, FASTER PRODUCTIVITY
VX 135HIGH QUALITY, FASTER PRODUCTIVITY
VX 165W HEELS OF INNOVATIVE TECHNOLOGY
MONO 165A STEP AHEAD OF EXCELLENCE
VX 200A STEP AHEAD OF EXCELLENCE
MONO-200A STEP AHEAD OF EXCELLENCE
MONO-250A STEP AHEAD OF EXCELLENCE
MONO-300A STEP AHEAD OF EXCELLENCE
MONO-400A STEP AHEAD OF EXCELLENCE
MAXI-200A STEP AHEAD OF EXCELLENCE
MAJOR-200A STEP AHEAD OF EXCELLENCE
LX-1000THE JUMBO PERFORMER
LX-1000 JUMBOTHE JUMBO PERFORMER
Home CNC Turning Centers VX 200
VX 200
APPLICATIONS
POW ER DIAGRAM
MACHINE RANGE & DIMENSION
BALL-BAR CALIBRATION
MACHINE STRUCTURE
CARTRIDGE TYPE SPINDLE
TOOL INTERFERENCE DIAGRAM
LASER CALIBRATION
A STEP AHEAD OF EXCELLENCE
In today 's competitiv e market, y ou need robust CNC turning centers with un-compromised
perf ormance and specif ications to produce world class products quickly. accurately and
with minimum of non productiv e time.
The rigid bed and single piece 30° slant sanddle are made out of 25 grade cast iron f or
more stability. It is heav ily ribbed to prov ide rigidity and least distortion during heav y
cuts and f aster production, with v irtually no v ibration. The bed is designed f or easy
chip f low and remov al.
Step-up concept enables consistent machining perf ormance because of widly spaced
guideway s.
The spindle is of cartridge ty pe design and uses 3 super precision angular contact
bearings in the f ront and 2 angular contact bearings at the rear end. The bearing
conf iguration giv es high stif f ness to the spindle assembly in both axial and radial
directions.
Trav eling on f our circuit linear rails, it comes with excellent f eatures. Setting
benchmarks with its unprecedented speed, precision and accuracy, the carriage
assembly pav es a way f or extremely high acceleration and deceleration response
which results in superior positioning and giv es accurate results repeatedly.
Calibration is being done with laser and ball bar. Macpower ensures maximum v alue
addition and quality output.
Equipped with the adv antage of an ergonomic design, the machine comes with a f ull
guard that enables a clean premises throughout the operation. This f eature prev ents
the contaminants f rom the machine slides, switches and other electrical dev ices.
SPECIFICATIONS FEATURES
TAILSTOCK
The tailstock consists of a hy draulically operater quill, which mov es inside the housing. The
quill and body are independently mov eable. The tailstock is supported on V and f lat
guidewaqy s. Programmable quill being prov ided as a standard.
Note:
* Design and Dev elpment are subject to change without prior notice.
* All the parts shown in photo are not included in standard accessories.
Home | Company | CNC Turning Centers | CNC Vertical Machining Centers | Infrastructure | Contact | Inquiry | Sitemap
© 2006-2012. MacPower CNC Machines Pvt. Ltd.
CAPACITY
SLIDES
BALL SCREW
MAIN SPINDLE
TURRET
OTHER DATA
ACCURACY
TAIL STOCK
CONTROL SYSTEM
CONTROL SYSTEM FEATURES
STANDARD FEATURES
OPTIONAL
INTRODUCING MACPOWER CNC MACHINES PVT. LTD.
PLOT NO: 2234, KRANTI GATE,LODHIKA GIDC, METODA,RAJKOT - 360021.GUJARAT. INDIA.
+91.2827.287930 / 2