SPECIFICATION
VXT700BYN-01
□ Preliminary Specification
□ Final Specification
Add: Room 301, Building 46, Block 25, Red flower Middle Road, Gongming Town, Shenzhen City, China
Tel: +86-755-2710 0102 Fax: +86-755-2710 0102
CUSTOMER:
Approved By:
Date:
Note:
SHENZHEN VICTRONIX TECHNOLOGY CO., LTD.
Made By:
Checked By:
Approved By:
Quality:
Date:
Note:
VICTRONIX
VXT700BYN-01 VER.01
2/16
Records of Revision
DATEREF.PAGE
PARAGRAPHDRAWING No.
REVISEDNo. SUMMARY REMARK
2016-04-08 V01 First Issue
VICTRONIX
VXT700BYN-01 VER.01
3/16
Contents
1. General Specification.......................................................................................................4
2. Mechanical Drawing........................................................................................................5
3. Block Diagram.................................................................................................................6
4. Interface Pin Function......................................................................................................7
5. Absolute Maximum Ratings............................................................................................. 8
6. Electrical Characteristics.................................................................................................. 9
7. Optical Characteristics....................................................................................................10
8. Timing Characteristics................................................................................................... 13
9. Standard Specification for Reliability............................................................................ 15
10. General Precautions..................................................................................................... 16
11. Packing Method........................................................................................................... 16
VICTRONIX
VXT700BYN-01 VER.01
4/16
1. General Specification
Item Contents Unit
LCD TYPE TFT/TRANSMISSIVE
MODULE SIZE (W*H*T) 160.93*99.7*2.65 MM
ACTIVE SIZE (W*H) 150.72*94.2 MM
PIXEL PITCH (W*H) 0.153*0.153 MM
NUMBER OF DOTS 800*1200
DIVER IC TBD
INTERFACE TYPE MIPI
TOP POLARIZER TYPE ANTI-GLARE
RECOMMEND VIEWING DIRECTION ALL O’CLOCK
GRAY SCALE INVERSION DIRECTION -- O’CLOCK
COLORS 262K
BACKLIGHT TYPE 20-CHIP WHITE LED
TOUCH PANEL TYPE WITHOUT
VICTRONIX
VXT700BYN-01 VER.01
5/16
2. Mechanical Drawing
Pixtel Detail
AK1K2K3K4
121
1324
2.65±
0.1
40.09±0.5
29±
0.5
GND
V=1.8V
R2=500KΩ
R1=NC
LCDID
AK1K2K3K4
AK1K2K3K4
12 1
13 24
49.8594.2(LCD A.A)
95.2(LCD V.A)
99.7±
0.2(LCM OD)
77.96150.72(LCD A.A)151.72(LCD V.A)
160.93±0.2(LCM OD)
(2.75)
(2.25)
(2.6)(2.1)
4.307±0.1
43±0.5
76.535±
0.5
12.085
800*
(RG
B)*
1280
7.0"
TFT
ALL
VIE
WIN
G
7
10
3.1
2.6
10.59.525
LED CIRCUIT DIAGRAM
16V@80mA
VICTRONIX
VXT700BYN-01
VICTRONIX COMPANY LIMITED
VXT700BYN-01 VER.01
6/16
3. Block Diagram
GND
VDD/IOVCC
LEDA
BL Circuit(20-Dies LED)
TFT LCD Panel
7.0"
800(RGB)*1200Gate:1200
Source:800*RGB
MIPI
MIPICLKN/P
MIPI_TDN0MIPI_TDN1
(COG)LCD
Controller/Driver orEquivalent
LEDK
MIPI_TDN3
VICTRONIX
VXT700BYN-01 VER.01
7/16
4. Interface Pin Function
Pin No. Symbol Description
Pin No. Symbol Description1 GND GROUND2 VLED_N LED CATHODE3 LRSTB RESET PIN4 LPTE TEARING EFFECT5 VI028_PMU POWER SUPPLY FOR ANALOG6 VI018_PMU POWER SUPPLY FOR LOGIC7 LCD_ID Product ID signal output (1.8V)8 NC No connection9 MIPI_TDN2 MIPI DATA NEGATIVE SIGNAL(2N)
10 MIPI_TDP2 MIPI DATA NEGATIVE SIGNAL(2P)11 GND GROUND12 GND GROUND13 GND GROUND14 VLED_P LED ANODE15 GND GROUND16 MIPI_TCP MIPI CLK POSITIVE SIGNAL(CLKP)17 MIPI_TCN MIPI CLK NEGATIVE SIGNAL(CLKN)18 GND GROUND19 MIPI_TDN0 MIPI DATA NEGATIVE SIGNAL(0N)20 MIPI_TDP0 MIPI DATA NEGATIVE SIGNAL(0P)21 GND GROUND22 MIPI_TDN1 MIPI DATA NEGATIVE SIGNAL(1N)23 MIPI_TDP1 MIPI DATA NEGATIVE SIGNAL(1P)24 GND GROUND
VICTRONIX
VXT700BYN-01 VER.01
8/16
5. Absolute Maximum Ratings
Note: The absolute maximum rating values of this product are not allowed to be exceeded at any times.Should a module be used with any of the absolute maximum ratings exceeded, the characteristicsof the module may not be recovered, or in an extreme case, the module may be permanentlydestroyed.
Parameter Symbol Min Max Unit
Supply voltage for analog VI028_PMU 5 V
Supply voltage for logic VI018_PMU 3.6 V
Supply current (One LED) ILED 80 mA
Operating temperature TOP -20 +70 C
Storage temperature TST -30 +80 C
VICTRONIX
VXT700BYN-01 VER.01
9/16
6. Electrical Characteristics6.1 Input Power
Item Symbol Min Typ. Max Unit Applicableterminal
Supply Voltage for Analog VI028_PM
U3.3 V
Supply Voltage for Logic VI018_PM
U1.8 V
Input VoltageVIL GND -
0.3VI018_PM
U V
VIH
0.7VI018_PM
U- VI018_PM
U
Input leakage Current ILKG - - μA
6.2 Backlight Driving Conditions
Item SymbolValue
Unit RemarkMin. Typ. Max.
Voltage for LED Backlight VF 16 V IL =80mA
Current for LED Backlight IL 80 mA
Power Consumption P 1.28 W
LED Life Time 30,000 Hr Note
Note: Brightness to be decreased to 50% of the initial value at ambient temperature TA=25℃
VICTRONIX
VXT700BYN-01 VER.01
10/16
7. Optical Characteristics
ITEM SYMBOL CONDITIONSSPECIFICATIONS
UNIT NOTEMIN TYP. MAX
Luminance L IL =80mA 300 Cd/m2
Contrast Ratio CR θ=0° 600 800
Response TimeTON
25℃ 30 35 msTOFF
CIEColor
Coordinate
RedXR
Viewing normalangle
YR
GreenXG
YG
BlueXB
YB
WhiteXW TBD
YW TBD
ViewingAngle
Hor.X
CR≥10
80 89
DegreeX 80 89
Ver.Y 80 89
Y 80 89
Uniformity Un 70 75 %
VICTRONIX
VXT700BYN-01 VER.01
11/16
Note 1: Definition of Viewing Angle θx and θy:
Note 2: Definition of contrast ratio CR:
CR=Luminance of white stateLuminance of black state
Note 3: Definition of Response Time(Tr,Tf)
TR TF100%90%
10%
White Black White
OpticalResponse
VICTRONIX
VXT700BYN-01 VER.01
12/16
Note 4: Definition of Luminance①The Brightness Test Equipment Setup
Field=2°(As measuring “black” image, field=2°is the best testing condition)
②The Brightness Test Point Setup
VICTRONIX
VXT700BYN-01 VER.01
13/16
8. Timing Characteristics
8.1 Signal timing
Vertical timings
VICTRONIX
VXT700BYN-01 VER.01
15/16
9. Standard Specification for Reliability9.1 Standard Specification for Reliability of LCD Module
Item Test Conditions RemarkHigh temperature storage Ta=80℃ 240hrs NOTE1 , NOTE4
Low temperature storage Ta=-30℃ 240hrs NOTE1 , NOTE4
High temperature operation Ta=70℃ 240hrs NOTE2 , NOTE4
Low temperature operation Ta=-20℃ 240hrs NOTE2 , NOTE4
Operate at high temperatureand humidity +60℃, 90%RH 240hrs NOTE4
Thermal Shock-20℃/30min~+60℃/30min for a total 100cycles, start with cold temperature and end withhigh temperature.
NOTE4
Vibration Test
Frequency range:10~55HZStroke:1.5mmSwap:10HZ~55HZ~10HZ2 hours of each direction of X.Y. Z(6 hours for total)
Mechanical shock 200G 2ms,±X,±Y, Z± 3 times for each direction
Package vibration test
Random vibration :1.5G*G/HZ from 10-500HZ,-6dB/Octave from 200-500HZof each direction of X.Y. Z(6 hours for total)
Low temperature storage Height:60cm1 corner ,3 edges ,6 surfaces
Low temperature storage AIR: 150pF,330Ω，15KVCONTACT:150pF,330Ω，8KV
Note 1: Ta is the ambient temperature of samples.Note 2: Ts is the temperature of panel’s surface.Note 3: In the standard condition, there shall be no practical problem that may affect the display function.
After the reliability test, the product only guarantees operation, but don’t guarantee all of thecosmetic specification.
Note 4: Before cosmetic and function test, the product must have enough recovery time, at least 2 hours atroom temperature.
VICTRONIX
VXT700BYN-01 VER.01
16/16
10. General Precautions10.1. Safety Liquid crystal is poisonous. Do not put it in your mouth. If liquid crystal touches your skin or
clothes, wash it off immediately by using soap and water.
10.2. Handling The LCD panel is plate glass. Do not subject the panel to mechanical shock or to excessive force
on its surface. The polarizer attached to the display is easily damaged. Please handle it carefully to avoid
scratch or other damages. To avoid contamination on the display surface, do not touch the module surface with bare hands. Keep a space so that the LCD panels do not touch other components. Put cover board such as acrylic board on the surface of LCD panel to protect panel from
damages. Transparent electrodes may be disconnected if you use the LCD panel under environmental
conditions where the condensation of dew occurs. Do not leave module in direct sunlight to avoid malfunction of the ICs.
10.3. Static Electricity Be sure to ground module before turning on power or operating module. Do not apply voltage which exceeds the absolute maximum rating value.
10.4. Storage Store the module in a dark room where must keep at 25±10℃ and 65%RH or less. Do not store the module in surroundings containing organic solvent or corrosive gas. Store the module in an anti-electrostatic container or bag.
10.5. Cleaning Do not wipe the polarizer with dry cloth. It might cause scratch. Only use a soft sloth with IPA to wipe the polarizer, other chemicals might permanent damage to
the polarizer.
11. Packing Method----TBD
VICTRONIX
