+ All Categories
Home > Lifestyle > Waist reducing and tight lacing corsets

Waist reducing and tight lacing corsets

Date post: 25-Jun-2015
Category:
Upload: josphewalls
View: 178 times
Download: 2 times
Share this document with a friend
Description:
A real corset is simply a way of distinguishing a traditional boned corset from the corset style basques you often see in the shops, which have a minimum of boning, usually plastic. Steel boning is used in "real" corsets to hold the fabric taut and distribute the tension of lacing. http://www.corsetdeal.com/Waist-training-corset_c_36.html
Popular Tags:
8
http://www.corsetdeal.co m/ Waist reducing and Tight lacing corsets
Transcript
Page 1: Waist reducing and tight lacing corsets

http://www.corsetdeal.com/

Waist reducing and Tight lacing corsets

Page 2: Waist reducing and tight lacing corsets

Tight lacing corsetsA "real" corset is simply a way of distinguishing a traditional boned corset from the corset style basques you often see in the shops, which have a minimum of boning, usually plastic. Steel boning is used in "real" corsets to hold the fabric taut and distribute the tension of lacing.

http://www.corsetdeal.com/Waist-training-corset_c_36.html

Page 3: Waist reducing and tight lacing corsets

Corset suitable for waist reductionHowever, it is a common misconception that steel boning will automatically make a corset suitable for waist reduction, so beware of cheaply made steel boned corsets passed off as "real" or "genuine" corsets.

http://www.corsetdeal.com/Waist-training-corset_c_36.html

Page 4: Waist reducing and tight lacing corsets

High Quality CorsetIf a corset is made to a high quality, it will usually be obvious in the photographs, and there will be no need to describe it as "real", so beware of this buzzword if it is not accompanied by a detailed description.

http://www.corsetdeal.com/Waist-training-corset_c_36.html

Page 5: Waist reducing and tight lacing corsets

Waist reductionWaist reduction is the main purpose of a corset. The standard waist reduction for steel boned corsets is around 4 inches. Before bidding on a "waist reducing" corset, ask the seller how much waist reduction is actually possible, and if they say less than a couple of inches, it is not a genuine waist reducing corset.

http://www.corsetdeal.com/Waist-training-corset_c_36.html

Page 6: Waist reducing and tight lacing corsets

Steel busk CorsetsCorsets should also include a steel busk at the front and should be laced at the back through quality two-part eyelets..Some kind of flat steel boning is essential either side of the eyelets to distribute the tension.

http://www.corsetdeal.com/Waist-training-corset_c_36.html

Page 7: Waist reducing and tight lacing corsets

flat steels eyletsThis usually consists of flat steels inserted either side of the eylets, but an alternative to this is lacing bones, which are flat steels with holes through which the lace is threaded.

http://www.corsetdeal.com/Waist-training-corset_c_36.html

Page 8: Waist reducing and tight lacing corsets

THANK YOU

For More Concern,Click Here :-

http://www.corsetdeal.com/Waist-training-corset_c_36.html


Recommended