1
ITEM #0338648, 0482291
WALL LANTERNMODEL #40683, 40684
Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.
Serial Number _________________________ Purchase Date _________________________
ATTACH YOUR RECEIPT HERE
EB13711
Portfolio® is a registered trademark of LF, LLC. All Rights Reserved. Français p. 8
Español p. 15
Lowes.com/portfolio
2Lowes.com/portfolio
PACKAGE CONTENTS
PART DESCRIPTION QUANTITYA Fixture 1B Ring 1C Mounting Bracket 1
Long Mounting Screw Qty. 2
Short Mounting Screw
(preassembled to Mounting Bracket (C))
Qty. 2
Wire Connector Qty. 3
Cap Nut (preassembled to Short Mounting
Screw (BB)) Qty. 2
Rubber Washer(preassembled to Short Mounting
Screw (BB)) Qty. 2
HARDWARE CONTENTS (shown actual size)
A B
CC DD EE
C
BBAA
Lowes.com/portfolio
3
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING: • Failure to disconnect the power supply prior to installation may result in serious injury or death.• Somemetalpartsinthefixturemayhavesharpedges.Topreventcutsandscrapes,wear
gloves when handling parts.• Account for small parts and destroy packing material, as these may be hazardous to children.• Useflashlightoralternatelightsourcetolightworkareaduringinstallation.• Assistancemayberequiredtosupportfixtureduringinstallation.• Toreducetheriskoffire,electricalshock,orpersonalinjury,wireconnectorsprovidedwiththis
fan are designed to accept only one 12-gauge house wire and two lead wires from the fan. If your house wire is larger than 12 gauges and there is more than one house wire to connect to the two fan lead wires, consult an electrician for the proper size wire connectors to use.
CAUTION:• Be sure the outlet box is properly grounded or that a ground (green or bare) wire is present. • Carefully check all screws, bolts and nuts to ensure they are secured.
PREPARATIONBefore beginning installation of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble, install or operate the product.Estimated Assembly Time: 35 minutesTools Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Wire cutters, Electrical tape and Safety goggles.Helpful Tools (not included): Wire strippers, Wire cutters, Safety glasses and Step ladder.
Lowes.com/portfolio
4
BB
DD
EE
C
AA
ASSEMBLY INSTRUCTIONS1. Shut off power at the circuit breaker or fuse panel
beforeremovingtheoldfixture.
DANGER: Failure to disconnect the power supply prior to installation may result in serious injury or death.
2. Ifnecessary,removetheoldfixture.Tobetterassistyou later in the wiring process, consider making a sketchofhowthefixtureiswiredbeforeyouremoveit.
3. Attach the mounting bracket (C) to the outlet box (not included) using the long mounting screws (AA). Then, remove the cap nuts (DD) and rubber washers (EE) from the short mounting screws (BB). Note: Short mounting screws (BB) should protrude out from the outlet box and the horizontal bar with short mounting screws (BB) should be parallel to the horizon to ensure proper mounting.
Hardware Used
AA Long Mounting Screw x 2
Short Mounting Screw x 2
Cap Nut x 2
Rubber Washer x 2
1
ON
OFF
ON
OFF
3
2
BB
DD
EE
Lowes.com/portfolio
5
ASSEMBLY INSTRUCTIONS4. If necessary, strip 1/2 in. of insulation from the end
of each supply wire. Twist the stripped ends of each strand of wire with pliers (not included).
5.Connectsupplyandfixture(A)wiresaccordingtothediagram and these steps:
•ConnecttheBarewirefromthefixture(A)totheBare/Green (ground) supply wire.
•ConnecttheBlackwirefromthefixture(A)totheBlack (hot) supply wire.
•ConnecttheWhitewirefromthefixture(A)totheWhite (common) supply wire.
•Secureallwiringconnectionstogetherwithwireconnectors (CC).
•LooptheBarewirefromthefixture(A)aroundtheground screw on the mounting bracket (C). Tighten screw to hold bare wire in place.
Note: If house wires are different colors than referred to above, stop immediately. It is recommended a professional electrician determines the proper wiring.
Hardware Used
CC Wire Connector x 3
6. Tape the wire connectors (CC) to the wire using electrical tape (not included). Turn the spliced/taped wires upward and gently push the wires and wire connectors (CC) into the outlet box.
WARNING: Ensure no bare wire or wire strands are visible after making connections. Place the Black and White wire connections on opposite sides of the outlet box.
Hardware Used
CC Wire Connector x 3
CC
CC
CC
Fixture
Black
White
Bare/Green
Black
White
Bare
6
4
5
Lowes.com/portfolio
6
ASSEMBLY INSTRUCTIONS7. Turn the ring (B) clockwise on the threaded rod
preassembledonthefixture(A).
8.Mountthefixture(A)ontotheshortmountingscrews(BB) and secure with rubber washers (EE) and cap nuts (DD).
Hardware Used
BB Short Mounting Screw x 2
Cap Nut x 2
Rubber Washer x 2
9. Install light bulb (not included). Use a 60-watt max. medium-base E26 incandescent bulb or a 13-watt max. medium-base E26 CFL.
B
B
B
A
7
8
9
DD DD
A
EE
BB
EE
Lowes.com/portfolio
7
CARE AND MAINTENANCE
Important:� Shut off the main power supply before you begin any maintenance tasks. Periodicallycleanthefixtureusingamild,non-abrasiveglasscleanerandsoftcloth.DoNOTusesolvents or cleaners containing abrasive agents and do not spray liquid cleaner directly onto the bulb or wiring.TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Thefixturedoesn’tlight.
1. Bulb is faulty or burned out.2. The power is off or the fuse is
blown.3. There is a faulty wire
connection.4. The switch is bad.
1. Replace with new bulb.2. Turn the power on or check the
fuse.3. Turn the power off and check all
wire connections.4. Test or replace the switch.
The fuse blows or circuit breaker trips when light is turned on.
There are wires crossed or the power wire is grounded out.
Turn the power off and check all wiring connections.
Fixturedoesnotfitflushagainstthemounting surface.
Outlet box may not be mounted flushwiththewall.
Removefixtureandmountingbracket. Turn each short mounting screw to adjust the length of the screw protruding from the mounting bracket.
Printed in China Portfolio® is a registered trademark of LF, LLC. All Rights Reserved.
9045 · 08/23/13
LIMITED WARRANTY
Themanufacturerwarrantsallofitslightingfixturesagainstdefectsinmaterialsandworkmanshipforthree (3) years from the date of purchase. If within this period the product is found to be defective, take a copy of the bill of sale as a proof of purchase and the product in its original carton to the place of purchase. The manufacturer will, at its option, repair, replace or refund the purchase price to the consumer.Allcostsofinstallationandremovalofthefixtureistheresponsibilityoftheconsumer.Thiswarrantydoesnotcoverfixturesbecomingdefectiveduetomisuse,accidentaldamageorimproperhandlingand/orinstallationandspecificallyexcludesliabilityfordirect,incidentalorconsequentialdamages. As some states do not allow exclusions of limitations on an implied warranty, the above exclusionandlimitationmaynotapply.Thiswarrantygivesyouspecificrightsandyoumayalsohaveother rights which may vary from state to state.