WARD FITTINGS · 2020. 12. 23. · WARD FITTINGS PRICE SCHEDULE #300121_rev1 EFFECTIVE: JANUARY 11,...

WARD FITTINGSPRICE SCHEDULE #300121_rev1 EFFECTIVE: JANUARY 11, 2021

117 Gulick Street, Blossburg, PA 16912 www.wardmfg.com (800) 248-1027

MICI

2www.wardmfg.com Price Sheet # 300121_rev1, Effective January 11, 2021# Preceding list price indicates available in mast quantity only from Blossburg, PA. * Preceding list price indicates available in box quantity only from Blossburg, PA. All galvanized fittings are lead free.

1. PRICES: This price sheet supersedes all previous issues. Prices in price sheets are subject to change without notice. Prices apply only to standard sizes as listed in catalog.

2. APPROVAL & ACCEPTANCE OF ORDERS: All orders are accepted on the basis of prices in effect at the time of shipment.

3. TAXES: Any Manufacturer or Sales Tax payable on the transaction under any effective statute will be added to the prices and terms quoted, unless a valid exemption certificate is on file.

4. CREDIT TERMS: Two percent cash discount tenth prox., - Net 30 days. Unless otherwise stated.

5. DELIVERY & SHIPMENT OF GOODS: All goods are shipped at buyer’s risk. Shipments should be carefully examined upon delivery and before the carrier’s delivery receipt is signed. If any loss or damage is evident, the buyer should make an appropriate notation on the delivery receipt and insist that the carrier’s driver initial such exception. The contents of all packages should be carefully examined for concealed damage as soon as possible after delivery, so that the carrier can be requested, within 48 hours after delivery, to arrange for prompt inspection of the damaged goods. Completion of all orders accepted and fulfillment of all agreements or contracts entered into are subject to any delay which might be occasioned by labor disputes, fires,accidents, embargoes, trade restrictions, governmental directives or other causes beyond our control. All promises of shipment will be as closely estimated as possible. We use our efforts in every case to ship within the time promised, but cannot guarantee to do so. All claims for shortage must be made on receipt of goods. We prove our count by weighing the package. Claims for shortage are subject to that test. Typographical, clerical, arithmetical errors or omissions in orders, invoices, quotations, price schedules, acknowledgments, or other documents are subject to correction.

6. RETURN OF GOODS: No goods will be taken back and credited without prior approval and issuance of a return goods authorization (RGA) number. All fittings returned with our permission must be goods sold by Ward Manufacturing, LLC, and in clean saleable condition. Credit will only be allowed on the basis of prices agreed upon. If product returned is a result of a customer ordering error or overstocking situation, the credit will be less 20 percent to cover handling costs, less any costs of returning to a saleable condition, and less transportation charges on original and return shipments. Orders for special goods are not subject to cancellation for any reason after work has been started on them, except upon agreement to make payment for all work which has been performed.

7. WARRANTY: Seller warrants the material to be free of defects in material and workmanship, under normal use, proper maintenance and proper operation, for a period of one year from date of delivery to a common carrier for shipment to buyer or his designated agent. The obligation of the seller Is limited to (1) repair of the material, or (2) replacement of any component or components proven defective in material or workmanship, or (3) refund of the purchase price. Seller shall have no liability for the cost of removal or reinstallation with respect to any replaced or repaired product. The election of said remedies shall be determined by seller in its sole discretion and shall be considered final disposition. All implied warranties, including the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed and excluded. This warranty is In lieu of all other warranties, guarantees, agreements and similar obligations of seller; in no event shall seller be liable for consequential or Incidental damages.

8. FREIGHT TERM: Shipments of 2,000 lb. net or more will be prepaid in the continental U.S. (except Alaska). We reserve the right to choose shipping point and carrier.

9. CARTON & BOX QUANTITY ADJUSTMENT: On orders received for less than master carton or box quantities, we reserve the right to adjust to the next carton or box quantity above the number of pieces shown on the order. Items subject to adjustment are identified with stars in the price sheet.

10. WEIGHTS: The weights per piece or per 100 pieces given in the price sheet, catalogs, and quotations are not guaranteed, but are approximate and for your convenience.

12. SPECIAL CONDITIONS: Any additional cost incurred in packaging or in making any special tests or inspection requested by Buyer in addition to those commercially supplied by Ward Manufacturing, LLC., will be charged to Buyer. Such tests and inspections will be made at the factory before date of shipment. Orders for fittings or parts will be subject to a net minimum invoice charge of $35.00 Net plus applicable handling and freight charges.

13. US EXPORT COMPLIANCE: The products sold by Ward Manufacturing, LLC. may be subject to the export control laws and regulations of the United States Government. Buyer may not make any disposition of such products, by way of sale, export, re-export, transshipment or otherwise, except as permitted under applicable U.S.law.

TERMS AND CONDITIONS OF SALE:


DESCRIPTION PCS PER BOX PCS PER MASTER

WEIGHT PER 100 PART # BLACK

PRICE (US$) BLACK PART # GALV.

PRICE (US$) GALV.

1/8 35 210 8 A.BM45L * 14.12 A.NM45L 21.871/4 35 210 13 B.BM45L * 14.12 B.NM45L * 18.513/8 40 240 17 C.BM45L * 14.12 C.NM45L * 20.681/2 50 200 26 D.BM45L * 10.71 D.NM45L * 13.833/4 40 160 38 E.BM45L * 13.26 E.NM45L * 19.861 25 100 60 1.BM45L * 16.69 1.NM45L * 22.46

1-1/4 10 40 90 1B.BM45L * 29.53 1B.NM45L * 41.941-1/2 10 40 122 1D.BM45L * 36.55 1D.NM45L * 49.27

2 8 16 187 2.BM45L * 55.28 2.NM45L * 72.892-1/2 15 15 320 2D.BM45L 159.94 2D.NM45L 253.61

3 8 8 451 3.BM45L 207.72 3.NM45L 368.824 4 4 719 4.BM45L 407.31 4.NM45L 618.335 1 1 1120 5.BM45L 1770.12 5.NM45L 2498.576 1 1 1910 6.BM45L 1811.03 6.NM45L 3012.70

MALLEABLE IRON 90° ELBOWS CLASS 150

Fig. 47

Fig. 48

MALLEABLE IRON 45° ELBOWS CLASS 150

DESCRIPTION PCS PER BOXPCS PER MASTER



PRICE (US$) GALV.

1/8 35 210 8 A.BML * 9.60 A.NML * 14.881/4 30 180 12 B.BML * 9.37 B.NML * 13.593/8 30 180 19 C.BML * 9.37 C.NML * 13.591/2 50 200 25 D.BML # 6.50 D.NML # 8.743/4 35 140 44 E.BML # 7.83 E.NML # 10.731 20 80 66 1.BML # 13.62 1.NML # 19.86

1-1/4 20 40 102 1B.BML # 22.46 1B.NML * 31.411-1/2 8 32 135 1D.BML # 29.52 1D.NML * 41.01

2 8 16 219 2.BML # 50.90 2.NML * 67.172-1/2 12 12 449 2D.BML * 113.40 2D.NML * 175.77

3 5 5 737 3.BML * 165.96 3.NML * 289.793-1/2 3 6 665 3D.BML 476.72 3D.NML 990.12

4 4 4 919 4.BML 356.47 4.NML 511.095 1 1 1355 5.BML 1145.95 5.NML 2428.256 1 1 2255 6.BML 1203.22 6.NML 2034.80

1/4 x 1/8 30 180 10 BXA.BML * 18.67 BXA.NML 24.373/8 x 1/8 25 75 15 CXA.BML 27.13 CXA.NML 41.363/8 x 1/4 25 150 16 CXB.BML * 13.18 CXB.NML 21.701/2 x 3/8 50 200 24 DXC.BML * 12.36 DXC.NML * 16.071/2 x 1/4 30 180 22 DXB.BML * 12.72 DXB.NML * 18.813/4 x 1/4 12 24 28 EXB.BML 21.81 EXB.NML 37.503/4 x 3/8 30 180 30 EXC.BML * 17.80 EXC.NML 25.733/4 x 1/2 30 120 35 EXD.BML * 12.72 EXD.NML * 18.671 x 3/8 25 100 47 1XC.BML * 34.72 1XC.NML 45.111 x 1/2 25 100 50 1XD.BML * 17.65 1XD.NML * 25.411 x 3/4 20 80 56 1XE.BML * 16.36 1XE.NML * 23.95

1-1/4 x 1/2 15 60 65 1BXD.BML * 35.82 1BXD.NML 51.131-1/4 x 3/4 15 60 74 1BXE.BML * 30.65 1BXE.NML * 48.261-1/4 x 1 10 40 83 1BX1.BML * 27.48 1BX1.NML * 40.17

1-1/2 x 1/2 12 48 79 1DXD.BML * 42.68 1DXD.NML * 55.471-1/2 x 3/4 12 48 89 1DXE.BML * 44.37 1DXE.NML * 64.201-1/2 x 1 10 40 106 1DX1.BML * 38.78 1DX1.NML * 64.20

1-1/2 x 1-1/4 15 30 120 1DX1B.BML * 38.78 1DX1B.NML * 64.202 x 1/2 10 40 121 2XD.BML * 53.63 2XD.NML * 71.792 x 3/4 15 30 140 2XE.BML * 67.68 2XE.NML * 91.012 x 1 12 24 134 2X1.BML * 63.83 2X1.NML * 89.21

2 x 1-1/4 10 20 162 2X1B.BML * 63.83 2X1B.NML * 85.972 x 1-1/2 10 20 172 2X1D.BML * 56.17 2X1D.NML * 74.99

2-1/2 x 1-1/2 12 12 256 2DX1D.BML 163.24 2DX1D.NML 283.242-1/2 x 2 12 12 312 2DX2.BML 154.16 2DX2.NML 254.23

3 x 2 8 8 364 3X2.BML 249.21 3X2.NML 401.313 x 2-1/2 5 5 475 3X2D.BML * 288.50 3X2D.NML * 462.06

4 x 3 4 4 738 4X3.BML 493.05 4X3.NML 1045.60


MALLEABLE IRON 90° STREET ELLS CLASS 150

MALLEABLE IRON 45° STREET ELLS CLASS 150

MALLEABLE IRON TEES CLASS 150

Fig. 50

Fig. 51

Fig. 52


WEIGHTPER 100 PART # BLACK


PRICE (US$) GALV.

1/8 40 240 8 A.BMSL * 13.84 A.NMSL * 19.411/4 30 180 11 B.BMSL * 13.84 B.NMSL * 18.803/8 30 180 18 C.BMSL * 13.84 C.NMSL * 18.801/2 50 200 27 D.BMSL # 13.43 D.NMSL * 19.203/4 35 140 52 E.BMSL # 13.43 E.NMSL * 19.201 20 80 70 1.BMSL # 19.01 1.NMSL * 25.69

1-1/4 15 30 106 1B.BMSL * 29.53 1B.NMSL * 43.131-1/2 12 24 143 1D.BMSL * 39.53 1D.NMSL * 54.14

2 8 16 294 2.BMSL * 64.23 2.NMSL * 91.292-1/2 8 8 358 2D.BMSL 162.83 2D.NMSL 264.09

3 8 8 705 3.BMSL 248.55 3.NMSL 384.324 1 1 1065 4.BMSL 513.49 4.NMSL 785.37

1/2 x 3/8 35 280 22 DXC.BMSL 21.85 DXC.NMSL 32.553/4 x 1/2 25 100 36 EXD.BMSL 29.66 EXD.NMSL 40.381 x 3/4 25 100 56 1XE.BMSL # 27.87 1XE.NMSL # 49.27

1-1/4 x 3/4 15 60 75 1BXE.BMSL 76.61 1BXE.NMSL 98.121-1/4 x 1 15 30 101 1BX1.BMSL 40.13 1BX1.NMSL 70.451-1/2 x 1 15 30 134 1DX1.BMSL 58.93 1DX1.NMSL 84.20

1-1/2 x 1-1/4 16 32 140 1DX1B.BMSL * 71.79 1DX1B.NMSL 88.122 x 1-1/2 12 24 225 2X1D.BMSL 113.12 2X1D.NMSL 149.70




PRICE (US$) GALV.

1/8 30 180 7 A.BMS45L * 21.79 A.NMS45L * 28.291/4 25 150 10 B.BMS45L 18.10 B.NMS45L 26.133/8 30 180 15 C.BMS45L * 18.35 C.NMS45L * 27.871/2 50 200 21 D.BMS45L * 14.98 D.NMS45L * 21.123/4 40 160 32 E.BMS45L * 22.63 E.NMS45L * 33.521 25 100 55 1.BMS45L * 26.36 1.NMS45L * 42.96

1-1/4 25 50 86 1B.BMS45L * 45.57 1B.NMS45L * 64.451-1/2 15 30 109 1D.BMS45L * 58.77 1D.NMS45L * 78.05

2 10 20 170 2.BMS45L * 98.85 2.NMS45L * 128.54




PRICE (US$) GALV.

1/8 35 210 13 A.BMT * 14.46 A.NMT * 21.031/4 35 210 17 B.BMT * 13.62 B.NMT * 17.703/8 30 180 26 C.BMT * 13.62 C.NMT * 17.701/2 30 120 37 D.BMT # 8.69 D.NMT # 11.333/4 20 80 60 E.BMT # 12.47 E.NMT # 18.671 12 48 91 1.BMT # 21.33 1.NMT * 30.17

1-1/4 15 30 138 1B.BMT * 34.55 1B.NMT * 47.901-1/2 10 20 184 1D.BMT * 42.97 1D.NMT * 59.54

2 15 15 316 2.BMT * 73.23 2.NMT * 96.772-1/2 8 8 494 2D.BMT 157.91 2D.NMT 272.43

3 6 6 722 3.BMT 232.62 3.NMT 333.853-1/2 1 4 900 3D.BMT 562.84 3D.NMT 801.45

4 3 3 1215 4.BMT 562.21 4.NMT 755.766 1 1 2550 6.BMT 2011.56 6.NMT 2964.40

1/8 x 1/8 x 1/4 25 50 12 AXB.BMT 28.13 AXB.NMT 53.761/4 x 1/4 x 1/8 25 50 13 BXA.BMT 31.00 BXA.NMT 39.561/4 x 1/4 x 3/8 15 30 19 BXC.BMT 30.48 BXC.NMT 54.233/8 x 1/4 x 1/4 15 30 19 CXBXB.BMT 36.29 CXBXB.NMT 49.493/8 x 3/8 x 1/4 15 30 21 CXB.BMT 21.43 CXB.NMT 34.043/4 x 3/8 x 3/8 35 140 36 EXCXC.BMT 78.683/8 x 3/8 x 1/2 30 180 34 CXD.BMT * 20.21 CXD.NMT 26.821/2 x 1/4 x 1/2 35 140 32 DXBXD.BMT 15.53 DXBXD.NMT 25.741/2 x 3/8 x 3/8 35 140 32 DXCXC.BMT * 23.13 DXCXC.NMT * 30.91


MALLEABLE IRON TEES CLASS 150(continued)

Fig. 52




PRICE (US$) GALV.

1/2 x 3/8 x 1/2 35 140 36 DXCXD.BMT * 23.13 DXCXD.NMT 34.211/2 x 1/2 x 1/4 25 100 29 DXB.BMT * 14.77 DXB.NMT * 21.701/2 x 1/2 x 3/8 35 140 36 DXC.BMT * 18.97 DXC.NMT 26.321/2 x 1/2 x 3/4 30 120 46 DXE.BMT * 22.26 DXE.NMT * 31.021/2 x 1/2 x 1 25 100 57 DX1.BMT 36.38 DX1.NMT 52.13

3/4 x 1/4 x 3/4 30 120 48 EXBXE.BMT 29.53 EXBXE.NMT 40.473/4 x 3/8 x 3/4 25 100 53 EXCXE.BMT * 59.533/4 x 1/2 x 1/2 30 120 45 EXDXD.BMT * 19.80 EXDXD.NMT * 31.023/4 x 1/2 x 3/4 20 80 54 EXDXE.BMT * 22.26 EXDXE.NMT * 29.633/4 x 3/4 x 1/4 30 120 43 EXB.BMT 21.43 EXB.NMT 27.723/4 x 3/4 x 3/8 30 120 49 EXC.BMT * 23.66 EXC.NMT 27.913/4 x 3/4 x 1/2 25 100 52 EXD.BMT * 19.28 EXD.NMT * 25.953/4 x 3/4 x 1 15 60 73 EX1.BMT * 29.36 EX1.NMT * 44.67

3/4 x 3/4 x 1-1/4 10 40 88 EX1B.BMT 65.03 EX1B.NMT 81.841 x 1/4 x 1 15 60 73 1XBX1.BMT * 28.24 1XBX1.NMT 47.17

1 x 1/2 x 1/2 20 80 54 1XDXD.BMT * 27.70 1XDXD.NMT 45.521 x 1/2 x 3/4 20 80 65 1XDXE.BMT * 33.04 1XDXE.NMT 46.481 x 1/2 x 1 15 60 76 1XDX1.BMT * 27.70 1XDX1.NMT 45.52

1 x 3/4 x 1/2 20 40 68 1XEXD.BMT * 27.85 1XEXD.NMT * 45.521 x 3/4 x 3/4 20 40 71 1XEXE.BMT * 25.73 1XEXE.NMT * 43.911 x 3/4 x 1 20 40 86 1XEX1.BMT * 28.24 1XEX1.NMT * 45.521 x 1 x 3/8 20 80 66 1XC.BMT * 34.19 1XC.NMT 46.481 x 1 x 1/4 20 80 63 1XB.BMT 30.80 1XB.NMT 50.701 x 1 x 1/2 15 60 71 1XD.BMT * 24.32 1XD.NMT * 36.441 x 1 x 3/4 25 50 79 1XE.BMT * 24.32 1XE.NMT * 36.44

1 x 1 x 1-1/4 15 30 123 1X1B.BMT * 53.85 1X1B.NMT 73.661 x 1 x 1-1/2 8 16 123 1X1D.BMT 88.27 1X1D.NMT 137.06

1 x 1 x 2 12 24 170 1X2.BMT 124.89 1X2.NMT 148.741-1/4 x 1/2 x 1 10 40 94 1BXDX1.BMT 60.26 1BXDX1.NMT 89.24

1-1/4 x 1/2 x 1-1/4 10 40 119 1BXDX1B.BMT * 51.63 1BXDX1B.NMT 71.641-1/4 x 3/4 x 3/4 10 40 89 1BXEXE.BMT * 51.63 1BXEXE.NMT 77.941-1/4 x 3/4 x 1 10 40 119 1BXEX1.BMT * 47.80 1BXEX1.NMT 74.10

1-1/4 x 3/4 x 1-1/4 15 30 125 1BXEX1B.BMT * 46.79 1BXEX1B.NMT 67.191-1/4 x 1 x 1/2 15 60 86 1BX1XD.BMT * 56.20 1BX1XD.NMT 76.121-1/4 x 1 x 3/4 15 30 98 1BX1XE.BMT 45.38 1BX1XE.NMT * 71.641-1/4 x 1 x 1 15 30 109 1BX1X1.BMT * 45.38 1BX1X1.NMT * 68.57

1-1/4 x 1 x 1-1/4 15 30 123 1BX1X1B.BMT * 54.50 1BX1X1B.NMT 72.531-1/4 x 1-1/4 x 3/8 10 40 85 1BXC.BMT 62.97 1BXC.NMT 99.381-1/4 x 1-1/4 x 1/2 15 30 99 1BXD.BMT * 44.34 1BXD.NMT * 59.741-1/4 x 1-1/4 x 3/4 12 24 109 1BXE.BMT * 38.87 1BXE.NMT * 56.531-1/4 x 1-1/4 x 1 14 28 116 1BX1.BMT * 42.13 1BX1.NMT * 56.53

1-1/4 x 1-1/4 x 1-1/2 10 20 153 1BX1D.BMT * 67.90 1BX1D.NMT 100.661-1/4 x 1-1/4 x 2 12 24 183 1BX2.BMT 113.52 1BX2.NMT 142.35

1-1/2 x 1/2 x 1-1/2 10 20 154 1DXDX1D.BMT * 61.70 1DXDX1D.NMT 98.511-1/2 x 3/4 x 3/4 10 40 108 1DXEXE.BMT * 103.41 1DXEXE.NMT 131.12

1-1/2 x 3/4 x 1-1/2 10 20 153 1DXEX1D.BMT * 61.70 1DXEX1D.NMT 89.831-1/2 x 1 x 1 10 20 135 1DX1X1.BMT * 61.70 1DX1X1.NMT 89.83

1-1/2 x 1 x 1-1/4 15 30 142 1DX1X1B.BMT 83.53 1DX1X1B.NMT 115.481-1/2 x 1 x 1-1/2 10 20 155 1DX1X1D.BMT * 61.70 1DX1X1D.NMT * 89.83

1-1/2 x 1-1/4 x 1/2 10 20 111 1DX1BXD.BMT 67.90 1DX1BXD.NMT 103.611-1/2 x 1-1/4 x 3/4 10 20 135 1DX1BXE.BMT * 61.70 1DX1BXE.NMT * 89.831-1/2 x 1-1/4 x 1 8 16 151 1DX1BX1.BMT * 52.97 1DX1BX1.NMT * 84.87

1-1/2 x 1-1/4 x 1-1/4 10 20 163 1DX1BX1B.BMT * 82.76 1DX1BX1B.NMT 124.511-1/2 x 1-1/4 x 1-1/2 10 20 180 1DX1BX1D.BMT * 93.02 1DX1BX1D.NMT 124.511-1/2 x 1-1/2 x 1/2 8 32 121 1DXD.BMT * 51.94 1DXD.NMT * 73.801-1/2 x 1-1/2 x 3/4 10 20 132 1DXE.BMT * 49.06 1DXE.NMT * 69.831-1/2 x 1-1/2 x 1 10 20 146 1DX1.BMT * 49.06 1DX1.NMT * 69.83

1-1/2 x 1-1/2 x 1-1/4 8 16 161 1DX1B.BMT * 60.67 1DX1B.NMT * 87.431-1/2 x 1-1/2 x 2 8 16 220 1DX2.BMT * 109.36 1DX2.NMT * 137.35

2 x 1/2 x 2 8 16 216 2XDX2.BMT * 96.18 2XDX2.NMT 126.982 x 3/4 x 2 8 16 216 2XEX2.BMT * 94.52 2XEX2.NMT * 124.552 x 1 x 1 8 16 164 2X1X1.BMT * 109.49 2X1X1.NMT 124.812 x 1 x 2 8 16 231 2X1X2.BMT * 96.18 2X1X2.NMT * 126.98

2 x 1-1/4 x 1-1/4 8 16 197 2X1BX1B.BMT * 96.18 2X1BX1B.NMT 126.982 x 1-1/4 x 1-1/2 10 20 195 2X1BX1D.BMT 134.98 2X1BX1D.NMT 196.52

2 x 1-1/4 x 2 8 16 267 2X1BX2.BMT * 103.33 2X1BX2.NMT * 146.652 x 1-1/2 x 1 8 16 194 2X1DX1.BMT * 94.52 2X1DX1.NMT * 119.95





PRICE (US$) GALV.

1/4 30 180 16 B.BMST 29.13 B.NMST * 41.803/8 12 24 25 C.BMST 34.19 C.NMST 46.781/2 15 120 35 D.BMST 28.24 D.NMST 44.283/4 20 80 58 E.BMST * 31.74 E.NMST * 40.621 12 24 98 1.BMST * 41.96 1.NMST * 64.22

1-1/4 10 20 162 1B.BMST * 69.29 1B.NMST * 107.111-1/4 x 1 x 1-1/4 8 16 128 1BX1X1B.BMST 101.46 1BX1X1B.NMST 153.39

1-1/2 12 24 197 1D.BMST 108.03 1D.NMST 163.282 6 12 316 2.BMST 198.93 2.NMST 312.59




PRICE (US$) GALV.

2 x 1-1/2 x 1-1/4 8 16 208 2X1DX1B.BMT * 96.36 2X1DX1B.NMT 126.982 x 1-1/2 x 1-1/2 8 16 224 2X1DX1D.BMT * 98.78 2X1DX1D.NMT 124.55

2 x 1-1/2 x 2 6 12 259 2X1DX2.BMT * 104.11 2X1DX2.NMT * 126.982 x 2 x 1/2 10 20 172 2XD.BMT * 78.34 2XD.NMT * 113.602 x 2 x 3/4 10 20 181 2XE.BMT * 76.88 2XE.NMT * 101.942 x 2 x 1 10 20 198 2X1.BMT * 76.88 2X1.NMT * 100.03

2 x 2 x 1-1/4 8 16 222 2X1B.BMT * 82.76 2X1B.NMT * 120.022 x 2 x 1-1/2 8 16 236 2X1D.BMT * 82.76 2X1D.NMT * 120.022 x 2 x 2-1/2 6 12 340 2X2D.BMT 270.68 2X2D.NMT 444.36

2-1/2 x 1-1/2 x 2 6 12 343 2DX1DX2.BMT 338.89 2DX1DX2.NMT 499.192-1/2 x 1-1/2 x 2-1/2 6 12 390 2DX1DX2D.BMT 270.68 2DX1DX2D.NMT 549.18

2-1/2 x 2 x 2 12 12 349 2DX2X2.BMT 247.77 2DX2X2.NMT 401.392-1/2 x 2 x 2-1/2 4 8 410 2DX2X2D.BMT 271.45 2DX2X2D.NMT 444.36

2-1/2 x 2-1/2 x 3/4 6 12 303 2DXE.BMT 230.70 2DXE.NMT 373.542-1/2 x 2-1/2 x 1 6 12 321 2DX1.BMT 239.54 2DX1.NMT 360.06

2-1/2 x 2-1/2 x 1-1/4 6 12 340 2DX1B.BMT 239.54 2DX1B.NMT 373.542-1/2 x 2-1/2 x 1-1/2 6 12 368 2DX1D.BMT 239.54 2DX1D.NMT 375.73

2-1/2 x 2-1/2 x 2 12 12 410 2DX2.BMT 205.45 2DX2.NMT 337.452-1/2 x 2-1/2 x 3 4 8 582 2DX3.BMT 453.37 2DX3.NMT 711.98

3 x 2 x 2 8 8 415 3X2X2.BMT 290.28 3X2X2.NMT 466.993 x 2 x 3 6 6 611 3X2X3.BMT 329.53 3X2X3.NMT 577.56

3 x 2-1/2 x 2 4 8 483 3X2DX2.BMT 477.31 3X2DX2.NMT 708.483 x 2-1/2 x 2-1/2 4 8 575 3X2DX2D.BMT 477.31 3X2DX2D.NMT 708.48

3 x 3 x 3/4 8 8 416 3XE.BMT 279.74 3XE.NMT 616.033 x 3 x 1 8 8 436 3X1.BMT 275.71 3X1.NMT 441.55

3 x 3 x 1-1/4 8 8 465 3X1B.BMT 290.48 3X1B.NMT 466.993 x 3 x 1-1/2 8 8 512 3X1D.BMT 285.26 3X1D.NMT 458.07

3 x 3 x 2 8 8 543 3X2.BMT 274.39 3X2.NMT 441.553 x 3 x 2-1/2 8 8 601 3X2D.BMT 325.95 3X2D.NMT 514.30

4 x 1-1/2 3 3 772 4X1D.BMT 665.44 4X1D.NMT 1046.804 x 2 3 3 822 4X2.BMT 647.10 4X2.NMT 982.81

4 x 2-1/2 4 4 915 4X2D.BMT 820.80 4X2D.NMT 1491.784 x 3 x 4 4 4 1138 4X3X4.BMT 914.77 4X3X4.NMT 1414.594 x 4 x 3 3 3 1031 4X3.BMT 665.44 4X3.NMT 1228.82

MALLEABLE IRON TEES CLASS 150(continued)

MALLEABLE IRON STREET TEES CLASS 150

Fig. 52

Fig. 64





PRICE (US$) GALV.

1/8 25 50 13 A.BMCR 41.49 A.NMCR 67.761/4 15 90 20 B.BMCR 31.62 B.NMCR 51.743/8 20 160 28 C.BMCR 36.02 C.NMCR 56.151/2 30 120 45 D.BMCR * 32.83 D.NMCR * 46.603/4 15 60 73 E.BMCR * 39.73 E.NMCR * 56.771 15 30 109 1.BMCR * 48.95 1.NMCR * 78.33

1-1/4 12 24 188 1B.BMCR * 79.44 1B.NMCR * 117.781-1/2 8 16 211 1D.BMCR * 98.45 1D.NMCR * 137.79

2 8 8 336 2.BMCR * 161.87 2.NMCR * 260.972-1/2 4 8 533 2D.BMCR 379.18 2D.NMCR 729.16

3 4 4 834 3.BMCR 478.15 3.NMCR 771.074 1 1 1290 4.BMCR 1094.45 4.NMCR 1984.18

MALLEABLE IRON STRT & RED PIPE COUPLINGS CLASS 150

Fig. 53

MALLEABLE IRON CROSSES CLASS 150

Fig. 61




PRICE (US$) GALV.

1/8 (steel) 40 240 3 A.BSMC * 13.50 A.NSMC * 19.381/4 35 210 11 B.BMC * 11.64 B.NMC * 16.213/8 40 240 16 C.BMC * 11.64 C.NMC * 16.771/2 40 240 21 D.BMC * 8.98 D.NMC * 12.803/4 40 160 31 E.BMC * 10.51 E.NMC * 14.741 25 100 48 1.BMC # 15.76 1.NMC * 24.18

1-1/4 15 60 74 1B.BMC * 20.39 1B.NMC * 34.111-1/2 10 40 98 1D.BMC * 27.57 1D.NMC * 38.76

2 8 32 154 2.BMC * 40.83 2.NMC * 56.652-1/2 8 8 262 2D.BMC 112.69 2D.NMC 173.41

3 8 8 391 3.BMC 152.34 3.NMC 231.784 4 4 610 4.BMC 306.81 4.NMC 492.28

1/4 x 1/8 25 150 9 BXA.BMC * 12.28 BXA.NMC * 16.613/8 x 1/8 30 180 18 CXA.BMC 15.70 CXA.NMC 27.273/8 x 1/4 25 150 12 CXB.BMC * 12.28 CXB.NMC * 16.611/2 x 1/8 25 150 16 DXA.BMC * 12.41 DXA.NMC 19.701/2 x 1/4 25 150 16 DXB.BMC * 11.15 DXB.NMC * 14.931/2 x 3/8 30 180 17 DXC.BMC * 10.54 DXC.NMC * 15.533/4 x 1/8 35 210 23 EXA.BMC * 14.68 EXA.NMC * 21.633/4 x 1/4 35 210 23 EXB.BMC * 14.07 EXB.NMC * 18.873/4 x 3/8 35 210 25 EXC.BMC * 14.07 EXC.NMC * 18.873/4 x 1/2 50 200 28 EXD.BMC * 11.79 EXD.NMC * 16.601 x 1/4 30 120 38 1XB.BMC 24.77 1XB.NMC 39.301 x 3/8 30 120 38 1XC.BMC * 23.14 1XC.NMC * 35.951 x 1/2 30 120 49 1XD.BMC * 18.80 1XD.NMC * 27.661 x 3/4 25 100 43 1XE.BMC * 18.35 1XE.NMC * 25.69

1-1/4 x 1/2 15 60 63 1BXD.BMC * 27.70 1BXD.NMC * 45.931-1/4 x 3/4 15 60 64 1BXE.BMC * 23.63 1BXE.NMC * 35.781-1/4 x 1 15 60 70 1BX1.BMC * 23.63 1BX1.NMC * 35.10

1-1/2 x 1/2 15 60 80 1DXD.BMC * 35.24 1DXD.NMC * 54.141-1/2 x 3/4 10 40 84 1DXE.BMC * 39.73 1DXE.NMC * 46.141-1/2 x 1 10 40 89 1DX1.BMC * 34.64 1DX1.NMC * 46.14

1-1/2 x 1-1/4 10 40 96 1DX1B.BMC * 29.86 1DX1B.NMC * 43.562 x 1/2 8 32 135 2XD.BMC * 57.38 2XD.NMC * 78.162 x 3/4 8 32 126 2XE.BMC * 49.54 2XE.NMC * 75.382 x 1 15 30 127 2X1.BMC * 46.82 2X1.NMC * 62.94

2 x 1-1/4 10 20 139 2X1B.BMC * 49.54 2X1B.NMC * 66.552 x 1-1/2 10 20 146 2X1D.BMC * 43.27 2X1D.NMC * 62.942-1/2 x 1 20 20 224 2DX1.BMC 127.89 2DX1.NMC 203.10

2-1/2 x 1-1/4 20 20 207 2DX1B.BMC 127.89 2DX1B.NMC 238.432-1/2 x 1-1/2 10 10 233 2DX1D.BMC 118.01 2DX1D.NMC 185.66

2-1/2 x 2 10 10 249 2DX2.BMC 99.46 2DX2.NMC 175.613 x 1 8 8 325 3X1.BMC 158.33 3X1.NMC 246.69

3 x 1-1/4 8 8 337 3X1B.BMC 161.28 3X1B.NMC 246.693 x 1-1/2 8 8 305 3X1D.BMC 155.47 3X1D.NMC 233.37

3 x 2 8 8 334 3X2.BMC 128.74 3X2.NMC 220.573 x 2-1/2 8 8 355 3X2D.BMC 150.33 3X2D.NMC 225.233-1/2 x 2 4 8 423 3DX2.BMC 516.02 3DX2.NMC 774.983-1/2 x 3 4 8 475 3DX3.BMC 513.48 3DX3.NMC 809.834 x 1-1/2 1 1 495 4X1D.BMC 410.82 4X1D.NMC 843.12

4 x 2 4 4 524 4X2.BMC 311.63 4X2.NMC 504.94





PRICE (US$) GALV.

1/2 50 300 10 D.BMWN 19.19 D.NMWN 22.103/4 50 300 12 E.BMWN 23.16 E.NMWN 31.411 25 150 17 1.BMWN 17.33 1.NMWN 23.24




PRICE (US$) GALV.

1/4 40 240 7 B.BMCAP * 8.64 B.NMCAP * 11.743/8 40 240 10 C.BMCAP * 7.23 C.NMCAP * 11.741/2 50 300 17 D.BMCAP * 6.55 D.NMCAP * 9.693/4 40 240 24 E.BMCAP * 8.89 E.NMCAP * 13.401 25 150 42 1.BMCAP * 10.76 1.NMCAP * 16.61

1-1/4 25 100 62 1B.BMCAP * 14.18 1B.NMCAP * 21.871-1/2 20 80 82 1D.BMCAP * 19.48 1D.NMCAP * 28.03

2 10 40 127 2.BMCAP * 28.41 2.NMCAP * 39.272-1/2 6 12 189 2D.BMCAP 64.73 2D.NMCAP 114.03

3 6 12 291 3.BMCAP * 96.18 3.NMCAP 138.183-1/2 8 16 322 3D.BMCAP 239.89 3D.NMCAP 417.27

4 5 10 566 4.BMCAP 164.93 4.NMCAP 305.325 4 8 740 5.BMCAP 432.47 5.NMCAP 855.996 3 3 995 6.BMCAP 720.59 6.NMCAP 1035.23




PRICE (US$) GALV

1-1/4 x 1 35 35 83 1BX1.BMEL * 100.231-1/2 x 1 30 30 96 1DX1.BMEL * 111.46

2 x 1 25 25 115 2X1.BMEL * 139.31




PRICE (US$) GALV.

3/8 12 24 28 C.BM45Y 36.60 C.NM45Y 44.491/2 35 140 39 D.BM45Y 36.29 D.NM45Y 39.953/4 20 80 65 E.BM45Y 48.12 E.NM45Y 65.801 10 40 100 1.BM45Y 59.77 1.NM45Y 85.50

1-1/4 12 24 160 1B.BM45Y 98.85 1B.NM45Y 136.971-1/2 10 20 213 1D.BM45Y 144.27 1D.NM45Y 201.19

2 10 10 332 2.BM45Y 224.53 2.NM45Y 323.642-1/2 1 4 586 2D.BM45Y 602.12 2D.NM45Y 874.13

3 1 1 915 3.BM45Y 832.48 3.NM45Y 1581.244 1 1 1570 4.BM45Y 1674.59 4.NM45Y 2490.86




PRICE (US$) GALV.

3/4 25 50 72 E.BMRB 70.59 E.NMRB 81.831 10 20 171 1.BMRB 65.61 1.NMRB 99.35

MALLEABLE IRON 45 Y CLASS 150

MALLEABLE IRON CAPS CLASS 150

MALLEABLE IRON LOCKNUT CLASS 150

MALLEABLE IRON WASTE NUT CLASS 150

MALLEABLE IRON RETURN BENDS OPEN CLASS 150

Fig. 60

Fig. 49

Fig. 55

MALLEABLE IRON END OF RUN CLASS 150

4 x 2-1/2 4 4 571 4X2D.BMC 349.50 4X2D.NMC 591.124 x 3 4 4 601 4X3.BMC 311.63 4X3.NMC 504.94

4 x 3-1/2 4X3D.NMC 774.985 x 4 1 1 940 5X4.BMC 770.56 5X4.NMC 1605.216 x 4 1 1 1300 6X4.BMC 940.04 6X4.NMC 1737.02

MALLEABLE IRON STRT & RED PIPE COUPLINGS CLASS 150(continued)

Fig. 53




PRICE (US$) GALV.




PRICE (US$) GALV.

1/8 (steel) 100 600 2 A.BSLN 8.50 A.NSLN 9.651/4 (steel) 100 600 3 B.BSLN * 7.82 B.NSLN * 7.82

3/8 50 300 4 C.BMLN * 10.83 C.NMLN 13.591/2 50 300 7 D.BMLN * 9.30 D.NMLN 10.983/4 50 300 10 E.BMLN * 10.12 E.NMLN 12.861 40 160 16 1.BMLN * 19.40 1.NMLN 23.39

1-1/4 40 160 22 1B.BMLN * 15.94 1B.NMLN 22.461-1/2 40 160 27 1D.BMLN * 22.39 1D.NMLN 29.14

2 25 100 55 2.BMLN * 37.18 2.NMLN 51.31

Fig. 62





PRICE (US$) GALV.

1/2 40 240 21 D.BMCLR * 18.82 D.NMCLR 24.683/4 40 160 33 E.BMCLR * 21.13 E.NMCLR 28.561 25 100 50 1.BMCLR * 31.40 1.NMCLR 42.11

1-1/4 15 60 74 1B.BMCLR * 37.26 1B.NMCLR 54.021-1/2 10 40 101 1D.BMCLR * 50.79 1D.NMCLR 69.44

2 8 32 154 2.BMCLR * 67.91 2.NMCLR 93.63




PRICE (US$) GALV.

1/4 x 2-3/8 25 150 24 B.BMFF 30.29 B.NMFF 58.933/8 x 2-15/16 25 150 40 C.BMFF 30.29 C.NMFF 58.93

1/2 x 3 30 120 46 D.BMFF * 30.29 D.NMFF * 75.693/4 x 3-1/4 30 120 49 E.BMFF * 30.29 E.NMFF * 75.691 x 3-7/8 30 60 98 1.BMFF * 38.06 1.NMFF * 69.09

1-1/4 x 3-7/8 30 60 80 1B.BMFF * 38.06 1B.NMFF * 91.821-1/2 x 4-1/2 10 40 140 1D.BMFF * 48.95 1D.NMFF * 117.63

2 x 5-1/2 15 30 226 2.BMFF * 58.89 2.NMFF * 149.392-1/2 x 5-13/16 10 10 225 2D.BMFF 64.62 2D.NMFF 181.62

3 x 6-3/8 10 10 286 3.BMFF 81.59 3.NMFF 177.27




PRICE (US$) GALV.

1/2 50 200 23 D.BME * 20.03 D.NME 32.273/4 50 200 32 E.BME * 29.52 E.NME 48.261 25 100 49 1.BME * 42.60 1.NME 60.51

1-1/4 15 60 93 1B.BME * 49.03 1B.NME 64.89

MALLEABLE IRON LEFT & RIGHT HAND THREAD COUPLINGSCLASS 150

MALLEABLE IRON 90° ELBOWS A.A.R.CLASS 300

MALLEABLE IRON FLOOR FLANGES CLASS 150

MALLEABLE IRON EXTENSION PIECES CLASS 150

Fig. 54

Fig. 15

Fig. 53

Fig. 65




PRICE (US$) GALV.

1/4 35 210 22 B.B300L * 32.88 B.N300L 58.893/8 20 120 32 C.B300L * 29.21 C.N300L 60.051/2 15 90 55 D.B300L * 39.56 D.N300L * 71.533/4 12 48 87 E.B300L * 42.81 E.N300L * 80.301 10 40 127 1.B300L * 54.68 1.N300L * 102.98

1-1/4 10 20 203 1B.B300L * 79.80 1B.N300L 161.771-1/2 8 16 265 1D.B300L * 94.09 1D.N300L * 175.32

2 5 10 413 2.B300L * 135.35 2.N300L * 294.642-1/2 6 6 683 2D.B300L 350.80 2D.N300L 655.72

3 6 6 1032 3.B300L 402.83 3.N300L 773.403/8 x 1/4 25 150 25 CXB.B300L 70.471/2 x 3/8 25 100 58 DXC.B300L 70.01 DXC.N300L 93.883/4 x 1/2 15 60 69 EXD.B300L 51.56 EXD.N300L 91.521 x 1/2 20 40 95 1XD.B300L 106.17 1XD.N300L 129.871 x 3/4 10 40 111 1XE.B300L 103.23 1XE.N300L 144.70

1-1/4 x 3/4 15 30 135 1BXE.B300L 204.871-1/4 x 1 15 30 155 1BX1.B300L 135.521-1/2 x 1 10 20 185 1DX1.B300L 225.29

1-1/2 x 1-1/4 10 20 215 1DX1B.B300L 225.292 x 1-1/4 5 10 302 2X1B.B300L 316.522 x 1-1/2 5 10 333 2X1D.B300L 282.25 2X1D.N300L 556.73

4 1 1 1635 4.B300L 1041.20 4.N300L 2415.32





PRICE (US$) GALV.

1/4 35 210 23 B.B30045L 48.95 B.N30045L 69.763/8 25 150 34 C.B30045L 48.95 C.N30045L 69.761/2 20 80 51 D.B30045L * 54.48 D.N30045L 106.263/4 15 60 76 E.B30045L * 60.62 E.N30045L 122.851 10 40 119 1.B30045L * 67.00 1.N30045L 134.21

1-1/4 12 24 178 1B.B30045L * 107.46 1B.N30045L 208.311-1/2 8 16 236 1D.B30045L * 140.04 1D.N30045L 269.52

2 6 12 370 2.B30045L * 211.64 2.N30045L 373.332-1/2 6 6 545 2D.B30045L 493.94 2D.N30045L 997.53

3 5 5 825 3.B30045L 649.54 3.N30045L 1370.074 3 3 1341 4.B30045L 1475.30 4.N30045L 1894.23


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1/4 40 240 19 B.B300SL 38.95 B.N300SL 61.963/8 35 140 31 C.B300SL 43.68 C.N300SL 61.961/2 15 90 48 D.B300SL * 50.89 D.N300SL 121.433/4 12 48 76 E.B300SL * 72.28 E.N300SL 128.961 10 40 111 1.B300SL * 84.76 1.N300SL 168.64

1-1/4 12 24 176 1B.B300SL * 116.60 1B.N300SL 220.271-1/2 10 20 245 1D.B300SL * 144.05 1D.N300SL 283.16

2 6 12 376 2.B300SL * 224.19 2.N300SL 442.573 2 4 973 3.B300SL 574.11


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1/2 50 200 38 D.B300S45L * 89.52 D.N300S45L * 174.133/4 25 100 62 E.B300S45L * 97.78 E.N300S45L * 184.451 15 60 89 1.B300S45L 114.65 1.N300S45L 216.32

1 1/4 10 40 150 1B.B300S45L 140.191 1/2 6 24 206 1D.B300S45L 226.73

2 8 16 334 2.B300S45L 350.68

MALLEABLE IRON STREET 90° ELBOWS A.A.R.CLASS 300

MALLEABLE IRON STREET 45° ELBOWS A.A.R.CLASS 300


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1/4 25 150 32 B.B300T 41.44 B.N300T 83.813/8 15 90 45 C.B300T 43.85 C.N300T 85.361/2 15 60 75 D.B300T * 55.86 D.N300T * 106.873/4 10 40 113 E.B300T * 60.28 E.N300T * 117.701 12 24 171 1.B300T * 72.53 1.N300T * 145.10

1-1/4 8 16 262 1B.B300T * 103.96 1B.N300T 207.111-1/2 6 12 369 1D.B300T * 121.21 1D.N300T * 215.35

2 4 8 559 2.B300T * 178.93 2.N300T * 344.292-1/2 4 4 951 2D.B300T 454.38 2D.N300T 1088.39

3 4 4 1305 3.B300T 619.97 3.N300T 1233.864 1 1 2340 4.B300T 1845.85 4.N300T 3310.79

3/8 x 1/4 18 108 43 CXB.B300T 53.19 CXB.N300T 86.721/2 x 3/8 15 60 68 DXC.B300T 94.63 DXC.N300T 144.801/2 x 1/4 20 80 58 DXB.B300T 59.65 DXB.N300T 144.80

3/4 x 1/2 x 1/2 1 1 78 EXDXD.B300T 158.323/4 x 1/2 x 3/4 13 52 93 EXDXE.B300T 112.48

3/4 x 1/4 15 60 73 EXB.B300T 158.323/4 x 3/8 13 52 80 EXC.B300T 176.613/4 x 1/2 10 40 100 EXD.B300T * 89.05 EXD.N300T 156.331 x 1/2 x 1 18 36 130 1XDX1.B300T 186.30

1 x 3/4 x 3/4 10 40 123 1XEXE.B300T 140.251 x 3/4 x 1 9 36 136 1XEX1.B300T 157.40

1 x 1/4 9 36 105 1XB.B300T 133.211 x 3/4 7 28 155 1XE.B300T * 108.85 1XE.N300T 205.32

MALLEABLE IRON 45° ELBOWS A.A.R.CLASS 300

MALLEABLE IRON TEES A.A.R. CLASS 300

Fig. 65A

Fig. 65B

Fig. 66



WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1/4 1 1 35 B.B300CR 116.791/2 12 48 89 D.B300CR 155.53 D.N300CR 278.223/4 15 30 136 E.B300CR * 183.44 E.N300CR 405.041 12 24 199 1.B300CR 200.09 1.N300CR 456.26

1-1/4 7 14 311 1B.B300CR 202.98 1B.N300CR 417.331-1/2 5 10 427 1D.B300CR * 350.07 1D.N300CR 558.87

2 3 6 665 2.B300CR * 381.20 2.N300CR 798.04

MALLEABLE IRON CROSSES A.A.R.CLASS 300

MALLEABLE IRON COUPLINGS AND REDUCERS A.A.R. CLASS 300


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1/4 35 210 18 B.B300C 29.66 B.N300C 38.643/8 25 150 31 C.B300C 29.66 C.N300C 55.601/2 20 80 48 D.B300C * 33.10 D.N300C 57.043/4 30 60 74 E.B300C * 38.09 E.N300C 64.431 10 40 110 1.B300C * 43.55 1.N300C 85.24

1-1/4 12 24 174 1B.B300C * 51.78 1B.N300C 111.091-1/2 10 20 223 1D.B300C * 77.57 1D.N300C 156.77

2 6 12 365 2.B300C * 111.71 2.N300C * 189.842 -1/2 8 8 535 2D.B300C 214.97 2D.N300C 521.64

3 5 5 734 3.B300C 309.66 3.N300C 621.013/8 x 1/4 25 150 25 CXB.B300C 39.21 CXB.N300C 55.621/2 x 1/4 20 120 35 DXB.B300C * 47.22 DXB.N300C 80.591/2 x 3/8 30 120 39 DXC.B300C * 47.22 DXC.N300C 80.593/4 x 1/4 25 100 45 EXB.B300C 70.393/4 x 3/8 20 80 50 EXC.B300C 70.39 EXC.N300C 129.363/4 x 1/2 20 80 55 EXD.B300C * 48.28 EXD.N300C 97.811 x 1/4 15 60 67 1XB.B300C 88.83 1XB.N300C 173.331 x 3/8 20 80 65 1XC.B300C 88.83 1XC.N300C 157.541 x 1/2 15 60 78 1XD.B300C * 58.84 1XD.N300C 119.191 x 3/4 12 48 83 1XE.B300C * 57.68 1XE.N300C 116.83

1-1/4 x 1/2 22 44 107 1BXD.B300C 132.51 1BXD.N300C 201.651-1/4 x 3/4 15 30 123 1BXE.B300C * 78.77 1BXE.N300C 146.021-1/4 x 1 18 36 134 1BX1.B300C * 75.95 1BX1.N300C 132.76

1-1/2 x 1/2 16 32 147 1DXD.B300C 137.63 1DXD.N300C 251.241-1/2 x 3/4 15 30 159 1DXE.B300C * 108.02 1DXE.N300C 180.951-1/2 x 1 14 28 166 1DX1.B300C * 104.00 1DX1.N300C 180.95

1-1/2 x 1-1/4 12 24 189 1DX1B.B300C * 118.30 1DX1B.N300C 199.642 x 1/2 12 24 228 2XD.B300C 198.62


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1 x 1/2 8 32 141 1XD.B300T * 108.85 1XD.N300T * 186.611-1/4 x 1 x 1 14 28 193 1BX1X1.B300T 173.881-1/4 x 1/2 12 24 180 1BXD.B300T 173.88 1BXD.N300T 315.161-1/4 x 1 10 20 240 1BX1.B300T * 157.16 1BX1.N300T 272.43

1-1/4 x 3/4 10 20 239 1BXE.B300T 144.91 1BXE.N300T 272.431-1/2 x 1/2 10 20 249 1DXD.B300T 197.29 1DXD.N300T 339.381-1/2 x 3/4 9 18 262 1DXE.B300T * 176.33 1DXE.N300T 334.381-1/2 x 1 8 16 298 1DX1.B300T * 176.33 1DX1.N300T 334.38

1-1/2 x 1-1/4 9 18 305 1DX1B.B300T 218.55 1DX1B.N300T2 x 1/2 6 12 363 2XD.B300T * 284.28 2XD.N300T * 533.342 x 3/4 8 16 386 2XE.B300T 284.28 2XE.N300T 533.342 x 1 6 12 421 2X1.B300T 284.28 2X1.N300T 450.71

2 x 1-1/4 6 12 425 2X1B.B300T 305.47 2X1B.N300T 643.832 x 1-1/2 5 10 483 2X1D.B300T * 264.38 2X1D.N300T 495.38

2 x 1-1/2 x 2 5 10 470 2X1DX2.B300T 358.602-1/2 x 1-1/2 4 4 653 2DX1D.B300T 509.14

3 x 2 4 4 990 3X2.B300T 1237.17 3X2.N300T 2220.21

MALLEABLE IRON TEES A.A.R. CLASS 300 (continued)Fig. 66

Fig. 68

Fig. 67


MALLEABLE IRON UNIONS BRASS TO IRON CLASS 150

MALLEABLE IRON UNIONS BRASS TO IRON CLASS 250


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1/8 25 150 27 A.BU * 52.52 A.NU 74.881/4 35 210 24 B.BU * 48.61 B.NU 65.943/8 30 180 32 C.BU * 33.48 C.NU 44.131/2 40 160 41 D.BU # 30.34 D.NU * 40.243/4 30 60 67 E.BU # 34.86 E.NU * 46.26

3/4 x 1/2 10 60 75 EXD.BU 61.85 EXD.NU 76.971 25 50 88 1.BU # 45.44 1.NU * 60.60

1-1/4 15 30 151 1B.BU * 65.16 1B.NU * 87.601-1/2 12 24 188 1D.BU * 81.24 1D.NU * 106.13

2 8 16 265 2.BU * 94.46 2.NU * 122.012-1/2 8 8 518 2D.BU 281.47 2D.NU 423.82

3 8 8 763 3.BU 338.82 3.NU 593.164 1 2 1451 4.BU 836.32 4.NU 1201.76


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1/8 25 150 15 A.B250U 132.27 A.N250U 170.631/4 35 210 25 B.B250U 53.36 B.N250U 68.813/8 30 180 38 C.B250U 53.73 C.N250U 69.831/2 40 80 60 D.B250U * 56.89 D.N250U * 91.693/4 30 60 102 E.B250U * 55.97 E.N250U * 83.291 18 36 120 1.B250U * 68.68 1.N250U 103.29

1-1/4 12 24 190 1B.B250U * 115.18 1B.N250U * 156.411-1/2 10 20 243 1D.B250U * 132.65 1D.N250U * 180.07

2 6 12 412 2.B250U * 170.17 2.N250U * 254.322-1/2 8 8 540 2D.B250U 533.35 2D.N250U 668.99

3 8 8 842 3.B250U 624.22 3.N250U 1026.394 1 2 1451 4.B250U 1106.39 4.N250U 1610.04

MALLEABLE IRON CAPS A.A.R. CLASS 300


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1/4 50 300 13 B.B300CAP 30.43 B.N300CAP 39.403/8 40 240 18 C.B300CAP 30.43 C.N300CAP 39.401/2 40 160 28 D.B300CAP 30.17 D.N300CAP 57.823/4 25 100 45 E.B300CAP * 38.09 E.N300CAP 69.111 15 60 73 1.B300CAP * 49.96 1.N300CAP 94.83

1-1/4 10 40 110 1B.B300CAP * 55.35 1B.N300CAP 112.191-1/2 15 30 140 1D.B300CAP * 80.84 1D.N300CAP 157.28

2 10 20 218 2.B300CAP * 112.36 2.N300CAP 217.662-1/2 10 10 340 2D.B300CAP 238.28 2D.N300CAP 538.37

3 8 16 463 3.B300CAP 312.35 3.N300CAP 773.95


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

2 x 3/4 6 12 235 2XE.B300C * 188.66 2XE.N300C * 382.792 x 1 8 16 264 2X1.B300C * 150.83 2X1.N300C 290.09

2 x 1-1/4 6 12 275 2X1B.B300C 184.41 2X1B.N300C 386.392 x 1-1/2 8 16 292 2X1D.B300C * 149.54 2X1D.N300C 258.93

2-1/2 x 1-1/2 4 8 388 2DX1D.B300C 320.30 2DX1D.N300C 706.452-1/2 x 2 8 8 437 2DX2.B300C 304.23 2DX2.N300C 706.453 x 1-1/2 4 8 560 3X1D.B300C 572.13

3 x 2 5 5 566 3X2.B300C 445.82 3X2.N300C 1068.243 x 2-1/2 4 8 643 3X2D.B300C 487.36 3X2D.N300C 1121.80

4 x 2 1 1 920 4X2.B300C 990.494 x 3 4 4 985 4X3.B300C 990.49

MALLEABLE IRON COUPLINGS AND REDUCERS A.A.R. CLASS 300 (continued)

Fig. 67

Fig. 69

Fig. 91

Fig. 92


MALLEABLE IRON UNIONS ALL IRON A.A.R. CLASS 300

MALLEABLE IRON UNIONS BRASS TO BRASS A.A.R. CLASS 300


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1/8 25 150 16 A.BAI300U 78.96 A.NAI300U 100.711/4 35 210 28 B.BAI300U 109.99 B.NAI300U 105.713/8 30 180 37 C.BAI300U 109.99 C.NAI300U 104.671/2 40 80 60 D.BAI300U 115.88 D.NAI300U 140.603/4 30 60 107 E.BAI300U * 124.35 E.NAI300U 154.661 18 36 125 1.BAI300U * 152.51 1.NAI300U 262.85

1-1/4 15 30 206 1B.BAI300U * 234.00 1B.NAI300U 286.321-1/2 10 20 253 1D.BAI300U * 285.72 1D.NAI300U 346.93

2 5 10 418 2.BAI300U 361.57 2.NAI300U 430.462-1/2 8 8 533 2D.BAI300U * 640.73 2D.NAI300U 840.56

3 8 8 854 3.BAI300U 1217.83 3.NAI300U 1348.67


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1/4 30 180 26 B.BBBU 63.97 B.NBBU 84.343/8 30 180 38 C.BBBU 68.31 C.NBBU 90.551/2 25 100 57 D.BBBU * 71.88 D.NBBU * 93.863/4 25 50 103 E.BBBU * 80.46 E.NBBU * 108.161 18 36 130 1.BBBU * 103.00 1.NBBU 146.09

1-1/4 15 30 208 1B.BBBU * 134.23 1B.NBBU 191.531-1/2 12 24 252 1D.BBBU * 161.22 1D.NBBU * 223.89

2 5 10 417 2.BBBU * 220.82 2.NBBU * 299.452-1/2 3 3 541 2D.BBBU 636.43 2D.NBBU 299.45

3 3 3 872 3.BBBU 774.63 3.NBBU 800.244 1 2 1517 4.BBBU 1581.72 4.NBBU 2236.52

MALLEABLE IRON UNIONS ALL IRON CLASS 150


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1/8 25 150 13 A.BAIU 49.60 A.NAIU 51.901/4 35 210 24 B.BAIU 49.60 B.NAIU 63.193/8 35 210 30 C.BAIU 49.60 C.NAIU 63.191/2 40 160 40 D.BAIU * 51.24 D.NAIU 67.243/4 30 60 68 E.BAIU * 58.06 E.NAIU * 74.711 25 50 88 1.BAIU * 75.15 1.NAIU 99.71

1-1/4 15 30 149 1B.BAIU * 103.68 1B.NAIU 136.671-1/2 12 24 182 1D.BAIU * 126.40 1D.NAIU 164.96

2 8 16 260 2.BAIU * 159.46 2.NAIU 195.552-1/2 8 8 520 2D.BAIU 330.93 2D.NAIU 508.20

3 8 8 772 3.BAIU 537.38 3.NAIU 791.97

MALLEABLE IRON UNIONS BRASS TO IRON A.A.R. CLASS 300


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1/8 25 150 15 A.B300U 77.84 A.N300U 86.881/4 35 210 25 B.B300U 71.00 B.N300U 96.453/8 30 180 38 C.B300U 71.85 C.N300U 98.361/2 40 80 57 D.B300U * 58.13 D.N300U * 93.283/4 30 60 109 E.B300U * 64.38 E.N300U * 101.141 18 36 129 1.B300U * 84.04 1.N300U * 134.18

1-1/4 12 24 208 1B.B300U * 137.04 1B.N300U * 187.121-1/2 10 20 252 1D.B300U * 143.53 1D.N300U * 225.29

2 6 12 428 2.B300U * 177.80 2.N300U * 270.432-1/2 8 8 541 2D.B300U 573.20 2D.N300U 754.31

3 8 8 872 3.B300U 741.56 3.N300U 1275.774 1 1 1730 4.B300U 2589.33 4.N300U 3343.53

Fig. 93

Fig. 94

Fig. 99

Fig. 98


MALLEABLE IRON GASKET UNIONS CLASS 150

DIELECTRIC UNIONS CLASS 150


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

3/8 35 210 29 C.BGU 52.01 C.NGU 62.401/2 40 160 38 D.BGU 54.91 D.NGU 79.733/4 30 60 65 E.BGU 61.96 E.NGU 87.281 25 50 82 1.BGU 80.26 1.NGU 113.15

1-1/4 15 30 141 1B.BGU 110.85 1B.NGU 155.621-1/2 15 30 172 1D.BGU 134.70 1D.NGU 190.02

2 8 16 262 2.BGU 168.01 2.NGU 233.97


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1/2 W 40 D.NDEUW 73.153/4 W 38 E.NDEUW 71.53

Fig. 95

Fig. 96

CAST IRON PLUGS – REGULAR CORED


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1/2 100 600 10 D.BP * 4.82 D.NP * 10.203/4 70 420 15 E.BP * 6.05 E.NP * 12.981 40 240 25 1.BP * 6.05 1.NP * 12.98

1-1/4 40 160 43 1B.BP * 9.66 1B.NP * 21.641-1/2 40 80 64 1D.BP * 13.67 1D.NP * 29.22

2 25 50 94 2.BP * 15.98 2.NP * 36.292-1/2 20 40 155 2D.BP 38.89 2D.NP 76.68

3 10 20 240 3.BP * 45.05 3.NP 98.203-1/2 10 20 208 3D.BP 109.93 3D.NP 179.33

4 SQUARE HEAD 5 10 409 4.BPSH 93.65 4.NPSH 269.484 BAR HEAD 5 10 399 4.BP * 92.80 4.NP 190.455 BAR HEAD 5 5 627 5.BP 174.45 5.NP 378.646 BAR HEAD 4 4 970 6.BP 227.72 6.NP 430.73

Fig. 01 & 02

CAST IRON PLUGS – SOLID

CAST IRON COUNTERSUNK PLUGS

HEX HEAD CLEANOUT PLUGS


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1/2 100 600 10 D.BSP * 5.37 D.NSP * 12.013/4 50 300 17 E.BSP * 16.21 E.NSP 34.321 30 180 33 1.BSP * 17.26 1.NSP 38.90

1-1/4 30 120 57 1B.BSP * 19.86 1B.NSP 42.391-1/2 40 80 81 1D.BSP * 28.17 1D.NSP 56.54

2 25 50 125 2.BSP 36.37 2.NSP 80.562-1/2 10 20 195 2D.BSP 53.82 2D.NSP 103.69

3 10 20 350 3.BSP 91.83 3.NSP 182.904 BAR HEAD 5 10 576 4.BSP 204.20 4.NSP 358.865 BAR HEAD 5 5 970 5.BSP 379.54


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1/2 MI 100 600 6 D.BCTP 10.99 D.NCTP 16.553/4 MI 80 480 10 E.BCTP 14.94 E.NCTP 25.731 MI 40 240 22 1.BCTP 20.91 1.NCTP 41.101-1/4 40 160 35 1B.BCTP 21.87 1B.NCTP 43.481-1/2 50 100 48 1D.BCTP 26.17 1D.NCTP 58.45

2 40 80 84 2.BCTP 38.64 2.NCTP 81.832-1/2 20 40 150 2D.BCTP 61.06 2D.NCTP 121.57

3 10 20 225 3.BCTP 99.73 3.NCTP 185.784 5 5 390 4.BCTP 268.79 4.NCTP 550.01


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1-1/4 1 1 28 1B.BCOP 12.00 1B.NCOP 21.404 1 1 172 4.BCOP 75.78 4.NCOP 194.18

Fig. 03 & 04

Fig. 05

Fig. 06



WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

3/8 x 1/4 25 150 3 CXB.BMB * 12.18 CXB.NMB 19.411/2 x 1/8 25 150 7 DXA.BMB * 12.18 DXA.NMB 19.411/2 x 1/4 25 150 7 DXB.BMB * 12.18 DXB.NMB 19.411/2 x 3/8 25 150 6 DXC.BMB * 12.18 DXC.NMB * 19.413/4 x 1/8 25 150 16 EXA.BB * 12.03 EXA.NB * 21.123/4 x 1/4 25 150 12 EXB.BB * 11.41 EXB.NB * 20.553/4 x 3/8 25 150 11 EXC.BB * 11.73 EXC.NB * 22.973/4 x 1/2 25 150 10 EXD.BB * 10.54 EXD.NB 17.601 x 1/8 25 150 21 1XA.BB * 17.12 1XA.NB * 28.261 x 1/4 25 150 25 1XB.BB * 14.77 1XB.NB * 24.011 x 3/8 25 150 18 1XC.BB * 15.18 1XC.NB * 24.121 x 1/2 25 150 22 1XD.BB * 11.23 1XD.NB * 21.701 x 3/4 25 150 17 1XE.BB * 11.09 1XE.NB * 20.21

1-1/4 x 1/8 25 150 36 1BXA.BB 20.60 1BXA.NB * 35.341-1/4 x 1/4 25 150 36 1BXB.BB 21.24 1BXB.NB 36.201-1/4 x 3/8 25 150 34 1BXC.BB * 17.80 1BXC.NB 36.201-1/4 x 1/2 25 150 31 1BXD.BB * 16.45 1BXD.NB * 30.851-1/4 x 3/4 25 150 38 1BXE.BB * 14.46 1BXE.NB * 27.221-1/4 x 1 25 150 30 1BX1.BB * 14.46 1BX1.NB * 27.22

1-1/2 x 1/8 30 120 62 1DXA.BB 23.13 1DXA.NB 43.781-1/2 x 1/4 15 90 49 1DXB.BB * 24.76 1DXB.NB * 48.781-1/2 x 3/8 30 120 47 1DXC.BB * 29.33 1DXC.NB * 50.981-1/2 x 1/2 30 120 40 1DXD.BB * 18.81 1DXD.NB * 37.911-1/2 x 3/4 30 120 46 1DXE.BB * 18.81 1DXE.NB * 37.911-1/2 x 1 30 120 51 1DX1.BB * 16.51 1DX1.NB * 34.27

1-1/2 x 1-1/4 30 120 31 1DX1B.BB * 18.35 1DX1B.NB * 32.832 x 1/4 20 80 73 2XB.BB * 26.69 2XB.NB 55.262 x 3/8 20 80 71 2XC.BB * 33.62 2XC.NB 56.542 x 1/2 20 80 60 2XD.BB * 29.88 2XD.NB * 47.522 x 3/4 20 80 61 2XE.BB * 23.64 2XE.NB * 44.182 x 1 20 80 75 2X1.BB * 22.59 2X1.NB * 44.18

2 x 1-1/4 20 80 85 2X1B.BB * 22.59 2X1B.NB * 44.182 x 1-1/2 20 80 61 2X1D.BB * 23.13 2X1D.NB * 38.10

2-1/2 x 1/2 20 20 102 2DXD.BB 38.76 2DXD.NB 80.452-1/2 x 3/4 20 20 120 2DXE.BB 41.55 2DXE.NB 80.452-1/2 x 1 20 20 90 2DX1.BB 41.55 2DX1.NB 80.45

2-1/2 x 1-1/4 20 20 105 2DX1B.BB 41.55 2DX1B.NB 80.452-1/2 x 1-1/2 20 20 111 2DX1D.BB 36.17 2DX1D.NB 72.41

2-1/2 x 2 20 20 113 2DX2.BB * 35.62 2DX2.NB 63.403 x 1/4 10 20 197 3XB.BB 51.36 3XB.NB 98.443 x 1/2 10 20 155 3XD.BB 65.37 3XD.NB 110.893 x 3/4 10 20 190 3XE.BB 61.06 3XE.NB 106.133 x 1 10 20 168 3X1.BB 56.19 3X1.NB 106.13

3 x 1-1/4 10 20 152 3X1B.BB 56.19 3X1B.NB 103.663 x 1-1/2 10 20 157 3X1D.BB 56.19 3X1D.NB 95.51

3 x 2 10 20 164 3X2.BB 41.96 3X2.NB 82.523 x 2-1/2 10 10 161 3X2D.BB 48.65 3X2D.NB 88.59

3-1/2 x 3/4 10 10 228 3DXE.BB 109.403-1/2 x 1 10 10 219 3DX1.BB 109.40 3DX1.NB 172.00

3-1/2 x 1-1/4 10 10 212 3DX1B.BB 109.40 3DX1B.NB 172.003-1/2 x 1-1/2 10 10 200 3DX1D.NB 188.46

3-1/2 x 2 10 10 190 3DX2.BB 106.84 3DX2.NB 188.463-1/2 x 2-1/2 10 10 198 3DX2D.NB 188.46

3-1/2 x 3 10 10 247 3DX3.BB 98.51 3DX3.NB 188.464 x 1/2 10 10 291 4XD.BB 116.88 4XD.NB 206.414 x 1 10 10 273 4X1.BB 127.35 4X1.NB 222.40

4 x 1-1/4 10 10 250 4X1B.BB 127.35 4X1B.NB 222.40

HEXAGON BUSHINGS

Fig. 09



WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1 x 1/2 25 150 14 1XD.BFB * 23.55 1XD.NFB * 49.301 x 3/4 25 150 12 1XE.BFB * 29.24 1XE.NFB * 49.30

1-1/4 x 3/4 25 150 27 1BXE.BFB 23.84 1BXE.NFB 64.451-1/4 x 1 25 150 20 1BX1.BFB * 31.65 1BX1.NFB * 61.03

1-1/2 x 1/2 30 120 45 1DXD.BFB 43.79 1DXD.NFB 89.011-1/2 x 3/4 30 120 40 1DXE.BFB 43.79 1DXE.NFB 89.241-1/2 x 1 30 120 32 1DX1.BFB * 37.91 1DX1.NFB * 86.43

1-1/2 x 1-1/4 30 120 20 1DX1B.BFB * 39.49 1DX1B.NFB * 87.472 x 1/2 20 80 66 2XD.BFB 57.68 2XD.NFB 122.312 x 3/4 20 80 70 2XE.BFB 49.72 2XE.NFB 107.932 x 1 20 80 69 2X1.BFB * 51.09 2X1.NFB * 110.82

2 x 1-1/4 20 80 60 2X1B.BFB 51.09 2X1B.NFB 110.822 x 1-1/2 20 80 42 2X1D.BFB * 53.16 2X1D.NFB * 115.19

2-1/2 x 1-1/4 20 20 100 2DX1B.BFB 55.38 2DX1B.NFB 137.032-1/2 x 2 20 20 56 2DX2.BFB 75.19 2DX2.NFB 153.683 x 1-1/2 10 10 95 3X1D.BFB 121.79 3X1D.NFB 184.07

3 x 2 10 10 134 3X2.BFB 123.88 3X2.NFB 207.493 x 2-1/2 10 10 95 3X2D.BFB 110.66 3X2D.NFB 231.74

3-1/2 x 2-1/2 10 10 171 3DX2D.NFB 319.034 x 2 10 10 280 4X2.BFB 284.63 4X2.NFB 441.78

4 x 2-1/2 10 10 252 4X2D.BFB 215.13 4X2D.NFB 444.994 x 3 10 10 200 4X3.BFB 235.72 4X3.NFB 444.99

4 x 3-1/2 10 10 115 4X3D.BFB 239.90 4X3D.NFB 424.635 x 4 10 10 300 5X4.BFB 284.63 5X4.NFB 441.786 x 4 6 6 550 6X4.BFB 454.67 6X4.NFB 877.246 x 5 6 6 375 6X5.BFB 437.17 6X5.NFB 797.288 x 6 2 2 925 8X6.BFB 1179.19 8X6.NFB 2434.50


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1 x 1/2 x 1/2 50 50 35 1XD.BTB 23.79 1XD.NTB 39.731-1/2 x 1 x 1 40 40 66 1DX1.BTB 34.64 1DX1.NTB 57.792 x 3/8 x 3/8 20 20 174 2XC.BTB 46.71 2XC.NTB 63.962 x 1/2 x 1/2 20 20 165 2XD.BTB 46.71 2XD.NTB 77.852 x 3/4 x 3/4 20 20 155 2XE.BTB 46.71 2XE.NTB 77.85

2 x 1 x 1 20 20 136 2X1.BTB 46.71 2X1.NTB 77.852 x 1-1/4 x 1-1/4 20 20 120 2X1B.BTB 46.71 2X1B.NTB 77.852 x 1-1/2 x 1-1/2 20 20 89 2X1D.BTB 46.71 2X1D.NTB 77.85

3 x 1 x 1 10 10 525 3X1.BTB 94.67 3X1.NTB 154.383 x 2 x 2 10 10 350 3X2.BTB 94.67 3X2.NTB 154.384 x 1 x 1 5 5 650 4X1.BTB 171.28 4X1.NTB 285.77

4 x 1-12 x 1-1/2 5 5 334 4X1D.BTB 171.28 4X1D.NTB 285.774 x 2 x 2 5 5 349 4X2.BTB 171.28 4X2.NTB 285.77

4 x 2-1/2 x 2-1/2 5 5 601 4X2D.BTB 171.28 4X2D.NTB 285.774 x 3 x 3 5 5 425 4X3.BTB 185.78 4X3.NTB 309.79

TANK BUSHINGS, DOUBLE TAPPED HVY TYPE ONLY

FLUSH BUSHINGS

Fig. 10

Fig. 13


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

4 x 1-1/2 10 10 286 4X1D.BB 117.27 4X1D.NB 222.404 x 2 10 10 322 4X2.BB 94.65 4X2.NB 173.26



5 x 2-1/2 10 10 543 5X2D.BB 220.60 5X2D.NB 343.205 x 3 10 10 496 5X3.BB 198.47 5X3.NB 376.005 x 4 10 10 474 5X4.BB 192.76 5X4.NB 367.206 x 2 6 6 650 6X2.BB 227.56 6X2.NB 425.36

6 x 2-1/2 6 6 620 6X2D.BB 252.93 6X2D.NB 428.036 x 3 6 6 752 6X3.BB 227.56 6X3.NB 425.366 x 4 6 6 788 6X4.BB 197.01 6X4.NB 401.296 x 5 6 6 617 6X5.BB 227.52 6X5.NB 425.368 x 4 2 2 1828 8X4.BB 497.738 x 6 2 2 1112 8X6.BB 428.78 8X6.NB 741.51

HEXAGON BUSHINGS(continued)

Fig. 09



WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1/4 25 150 17 B.BCL * 19.03 B.NCL 31.913/8 25 150 25 C.BCL * 27.59 C.NCL 31.911/2 100 100 41 D.BCL * 12.07 D.NCL 36.373/4 100 100 69 E.BCL * 12.57 E.NCL 35.701 50 50 103 1.BCL * 14.90 1.NCL 41.26

1-1/4 25 25 158 1B.BCL * 21.15 1B.NCL 64.211-1/2 25 25 209 1D.BCL * 29.24 1D.NCL 88.17

2 15 15 339 2.BCL * 45.71 2.NCL 130.222-1/2 10 10 514 2D.BCL * 109.52 2D.NCL 267.23

3 6 6 787 3.BCL 179.35 3.NCL 406.473-1/2 3 3 955 3D.BCL 487.15

4 2 2 1323 4.BCL 332.51 4.NCL 744.735 1 1 2040 5.BCL 761.206 1 1 2985 6.BCL 986.388 1 1 6456 8.BCL 2308.24

1/2 x 1/4 1 1 40 DXB.BCL 31.093/4 x 1/2 100 100 56 EXD.BCL * 25.39 EXD.NCL 41.291 x 3/4 50 50 92 1XE.BCL * 21.21 1XE.NCL 47.831 x 1/2 50 50 71 1XD.BCL * 18.81 1XD.NCL 45.29

1-1/4 x 1/2 25 25 100 1BXD.BCL * 29.93 1BXD.NCL 74.261-1/4 x 3/4 25 25 115 1BXE.BCL * 30.43 1BXE.NCL 61.091-1/4 x 1 25 25 127 1BX1.BCL * 26.69 1BX1.NCL 70.18

1-1/2 x 1/2 25 25 147 1DXD.BCL * 52.85 1DXD.NCL 108.961-1/2 x 3/4 25 25 146 1DXE.BCL * 49.28 1DXE.NCL 89.481-1/2 x 1 25 25 157 1DX1.BCL * 49.28 1DX1.NCL 102.82

1-1/2 x 1-1/4 25 25 190 1DX1B.BCL * 53.90 1DX1B.NCL 104.892 x 1/2 15 15 204 2XD.BCL * 82.16 2XD.NCL 154.292 x 3/4 15 15 206 2XE.BCL * 72.12 2XE.NCL 154.292 x 1 15 15 227 2X1.BCL * 72.12 2X1.NCL 154.29

CAST IRON 90° ELBOWSCLASS 125

Fig. 21

2 x 1-1/4 15 15 249 2X1B.BCL * 77.12 2X1B.NCL 154.292 x 1-1/2 15 15 274 2X1D.BCL * 72.12 2X1D.NCL 126.68

2-1/2 x 3/4 10 10 280 2DXE.BCL 164.64 2DXE.NCL 295.772-1/2 x 1 10 10 258 2DX1.BCL 168.21 2DX1.NCL 295.77

2-1/2 x 1-1/4 10 10 326 2DX1B.BCL 168.21 2DX1B.NCL 295.772-1/2 x 1-1/2 10 10 326 2DX1D.BCL 164.24 2DX1D.NCL 279.02

2-1/2 x 2 10 10 400 2DX2.BCL 145.66 2DX2.NCL 279.023 x 1 6 6 475 3X1.BCL 269.32 3X1.NCL 677.28

3 x 1-1/4 6 6 465 3X1B.BCL 274.99 3X1B.NCL 392.433 x 1-1/2 6 6 603 3X1D.BCL 274.99 3X1D.NCL 477.91

3 x 2 6 6 575 3X2.BCL 253.34 3X2.NCL 450.853 x 2-1/2 6 6 574 3X2D.BCL 274.99 3X2D.NCL 477.914 x 1-1/2 4 4 850 4X1D.BCL 459.39 4X1D.NCL 824.83

4 x 2 4 4 775 4X2.BCL 469.19 4X2.NCL 778.144 x 2-1/2 4 4 890 4X2D.BCL 469.19 4X2D.NCL 824.83

4 x 3 4 4 1067 4X3.BCL 469.19 4X3.NCL 778.145 x 4 1 1 1690 5X4.BCL 1128.356 x 3 1 1 2038 6X3.BCL 1494.176 x 4 1 1 2465 6X4.BCL 1494.17



WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1/4 1 1 16 B.BC45L 24.541/2 100 100 36 D.BC45L * 18.48 D.NC45L 36.353/4 100 100 60 E.BC45L * 18.59 E.NC45L 41.681 50 50 87 1.BC45L * 21.82 1.NC45L 51.27

1-1/4 25 25 140 1B.BC45L * 29.31 1B.NC45L 76.521-1/2 25 25 180 1D.BC45L * 48.57 1D.NC45L 108.17

2 15 15 309 2.BC45L * 56.02 2.NC45L 151.692-1/2 10 10 462 2D.BC45L 145.70 2D.NC45L 244.52

3 6 6 655 3.BC45L 230.76 3.NC45L 476.984 2 2 992 4.BC45L 479.80 4.NC45L 874.556 1 1 2530 6.BC45L 1450.93

CAST IRON 45° ELBOWSCLASS 125


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1/4 1 1 22 B.BCT 31.15 B.NCT 33.473/8 25 150 39 C.BCT * 28.97 C.NCT * 38.461/2 100 100 55 D.BCT * 18.81 D.NCT 37.113/4 50 50 92 E.BCT * 21.95 E.NCT 51.341 25 25 142 1.BCT * 19.54 1.NCT 55.76

1-1/4 25 25 223 1B.BCT * 35.66 1B.NCT 97.531-1/2 25 25 287 1D.BCT * 46.33 1D.NCT 129.01

2 15 15 469 2.BCT * 64.50 2.NCT 160.992-1/2 9 9 675 2D.BCT 167.60 2D.NCT 327.22

3 5 5 994 3.BCT 257.20 3.NCT 736.573-1/2 3 3 1246 3D.BCT 518.73

4 2 2 1737 4.BCT 501.69 4.NCT 1031.965 1 1 2718 5.BCT 1433.796 1 1 3960 6.BCT 1627.84

CAST IRON STRAIGHT TEESCLASS 125

Fig. 23

Fig. 24



WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1/2 x 1/2 x 1/4 1 1 60 DXB.BCT 48.531/2 x 1/2 x 3/8 25 25 55 DXC.BCT 39.13 DXC.NCT 55.271/2 x 1/2 x 3/4 50 50 99 DXE.BCT * 35.41 DXE.NCT 58.761/2 x 1/2 x 1 45 45 89 DX1.BCT * 41.93

3/4 x 1/2 x 1/2 50 50 70 EXDXD.BCT * 35.41 EXDXD.NCT 55.473/4 x 1/2 x 3/4 50 50 96 EXDXE.BCT * 35.41 EXDXE.NCT 55.473/4 x 3/4 x 1/4 1 1 62 EXB.BCT 42.133/4 x 3/4 x 3/8 50 50 81 EXC.BCT 36.34 EXC.NCT 58.763/4 x 3/4 x 1/2 50 50 81 EXD.BCT * 30.50 EXD.NCT 55.473/4 x 3/4 x 1 45 45 135 EX1.BCT * 35.82 EX1.NCT 72.431 x 1/4 x 1 50 50 106 1XBX1.BCT 45.80 1XBX1.NCT 72.43

1 x 1/2 x 1/2 50 50 84 1XDXD.BCT 43.98 1XDXD.NCT 59.491 x 1/2 x 3/4 50 50 100 1XDXE.BCT 40.07 1XDXE.NCT 66.511 x 1/2 x 1 50 50 109 1XDX1.BCT * 29.01 1XDX1.NCT 61.74

1 x 1/2 x 1-1/4 25 25 187 1XDX1B.BCT 82.30 1XDX1B.NCT 109.401 x 3/4 x 1/2 50 50 97 1XEXD.BCT 40.07 1XEXD.NCT 66.511 x 3/4 x 3/4 50 50 100 1XEXE.BCT * 36.79 1XEXE.NCT 62.741 x 3/4 x 1 50 50 126 1XEX1.BCT * 29.48 1XEX1.NCT 53.54

1 x 3/4 x 1-1/4 25 25 202 1XEX1B.BCT 82.30 1XEX1B.NCT 109.401 x 1 x 1/4 1 1 85 1XB.BCT 47.431 x 1 x 3/8 50 50 116 1XC.BCT 35.70 1XC.NCT 67.371 x 1 x 1/2 50 50 108 1XD.BCT * 22.01 1XD.NCT 67.371 x 1 x 3/4 50 50 126 1XE.BCT * 26.43 1XE.NCT 65.19

1 x 1 x 1-1/4 25 25 164 1X1B.BCT * 42.22 1X1B.NCT 107.291 x 1 x 1-1/2 25 25 194 1X1D.BCT 70.63 1X1D.NCT 93.04

1 x 1 x 2 1 1 225 1X2.BCT 139.561-1/4 x 1/2 x 1-1/4 25 25 181 1BXDX1B.BCT * 54.45 1BXDX1B.NCT 103.211-1/4 x 1/2 x 1-1/2 25 25 230 1BXDX1D.BCT 76.46 1BXDX1D.NCT 148.60

1-1/4 x 1/2 x 1 25 25 185 1BXDX1.BCT * 63.89 1BXDX1.NCT 103.211-1/4 x 1/2 x 3/4 25 25 144 1BXDXE.BCT 64.01 1BXDXE.NCT 109.401-1/4 x 1/2 x 1/2 25 25 110 1BXDXD.BCT 84.01 1BXDXD.NCT 109.401-1/4 x 3/4 x 1/2 25 25 150 1BXEXD.BCT 63.63 1BXEXD.NCT 109.401-1/4 x 3/4 x 3/4 25 25 136 1BXEXE.BCT * 63.63 1BXEXE.NCT 109.401-1/4 x 3/4 x 1 25 25 172 1BXEX1.BCT * 63.63 1BXEX1.NCT 109.40

1-1/4 x 3/4 x 1-1/4 25 25 177 1BXEX1B.BCT * 51.93 1BXEX1B.NCT 95.681-1/4 x 3/4 x 1-1/2 25 25 230 1BXEX1D.BCT 69.16 1BXEX1D.NCT 158.33

1-1/4 x 1 x 1/2 25 25 136 1BX1XD.BCT * 35.68 1BX1XD.NCT 101.371-1/4 x 1 x 3/4 25 25 160 1BX1XE.BCT * 40.34 1BX1XE.NCT 107.291-1/4 x 1 x 1 25 25 164 1BX1X1.BCT * 35.22 1BX1X1.NCT 101.37

1-1/4 x 1 x 1-1/4 25 25 195 1BX1X1B.BCT * 38.89 1BX1X1B.NCT 107.291-1/4 x 1 x 1-1/2 25 25 270 1BX1X1D.BCT * 65.32 1BX1X1D.NCT 152.43

1-1/4 x 1 x 2 1 1 267 1BX1X2.BCT 129.821-1/4 x 1-1/4 x 1/2 25 25 164 1BXD.BCT * 35.17 1BXD.NCT 101.371-1/4 x 1-1/4 x 3/4 25 25 172 1BXE.BCT * 38.22 1BXE.NCT 83.261-1/4 x 1-1/4 x 1 25 25 185 1BX1.BCT * 35.22 1BX1.NCT 101.37

1-1/4 x 1-1/4 x 1-1/2 25 25 278 1BX1D.BCT * 65.32 1BX1D.NCT 152.431-1/4 x 1-1/4 x 2 15 15 295 1BX2.BCT 109.031-1/2 x 1/2 x 1/2 25 25 158 1DXDXD.BCT 83.24 1DXDXD.NCT 148.321-1/2 x 1/2 x 3/4 25 25 167 1DXDXE.BCT 83.24 1DXDXE.NCT 148.32

1-1/2 x 1/2 x 1-1/4 25 25 235 1DXDX1B.BCT * 82.74 1DXDX1B.NCT 148.601-1/2 x 1/2 x 1-1/2 25 25 217 1DXDX1D.BCT * 72.82 1DXDX1D.NCT 148.601-1/2 x 3/4 x 1/2 25 25 171 1DXEXD.BCT 71.53 1DXEXD.NCT 153.211-1/2 x 3/4 x 3/4 25 25 166 1DXEXE.BCT 71.53 1DXEXE.NCT 153.211-1/2 x 3/4 x 1 25 25 192 1DXEX1.BCT 71.53 1DXEX1.NCT 125.80

1-1/2 x 3/4 x 1-1/4 25 25 230 1DXEX1B.BCT * 71.15 1DXEX1B.NCT 153.211-1/2 x 3/4 x 1-1/2 25 25 228 1DXEX1D.BCT * 71.13 1DXEX1D.NCT 122.03

1-1/2 x 1 x 1/2 25 25 191 1DX1XD.BCT * 75.56 1DX1XD.NCT 148.601-1/2 x 1 x 3/4 25 25 192 1DX1XE.BCT * 73.12 1DX1XE.NCT 148.601-1/2 x 1 x 1 25 25 189 1DX1X1.BCT * 65.32 1DX1X1.NCT 125.17

1-1/2 x 1 x 1-1/4 25 25 271 1DX1X1B.BCT * 75.56 1DX1X1B.NCT 148.601-1/2 x 1 x 1-1/2 25 25 249 1DX1X1D.BCT * 54.46 1DX1X1D.NCT 145.83

1-1/2 x 1 x 2 15 15 411 1DX1X2.BCT * 102.04 1DX1X2.NCT 203.001-1/2 x 1-1/4 x 1/2 25 25 178 1DX1BXD.BCT * 49.61 1DX1BXD.NCT 137.891-1/2 x 1-1/4 x 3/4 25 25 204 1DX1BXE.BCT * 52.47 1DX1BXE.NCT 145.831-1/2 x 1-1/4 x 1 25 25 224 1DX1BX1.BCT * 45.93 1DX1BX1.NCT 137.89

1-1/2 x 1-1/4 x 1-1/4 25 25 236 1DX1BX1B.BCT * 65.32 1DX1BX1B.NCT 152.43

1-1/2 X 1-1/4 X 1-1/2 25 25 271 1DX1BX1D.BCT * 65.32 1DX1BX1D.NCT 152.43

CAST IRON REDUCING TEESCLASS 125

Fig. 25


CAST IRON REDUCING TEESCLASS 125(continued)

1-1/2 x 1-1/4 x 2 15 15 430 1DX1BX2.BCT * 99.98 1DX1BX2.NCT 199.171-1/2 x 1-1/2 x 1/2 25 25 200 1DXD.BCT * 45.93 1DXD.NCT 137.891-1/2 x 1-1/2 x 3/4 25 25 217 1DXE.BCT * 49.61 1DXE.NCT 137.891-1/2 x 1-1/2 x 1 25 25 242 1DX1.BCT * 45.93 1DX1.NCT 137.89

1-1/2 x 1-1/2 x 1-1/4 25 25 262 1DX1B.BCT * 65.32 1DX1B.NCT 152.431-1/2 x 1-1/2 x 2 15 15 355 1DX2.BCT * 71.44 1DX2.NCT 199.17

1-1/2 x 1-1/2 x 2-1/2 10 10 425 1DX2D.BCT * 220.37 1DX2D.NCT 386.142 x 1/2 x 1/2 15 15 220 2XDXD.BCT 117.44

2 x 1/2 x 1-1/4 15 15 341 2XDX1B.BCT * 117.44 2XDX1B.NCT 191.492 x 1/2 x 1-1/2 15 15 314 2XDX1D.BCT * 117.44 2XDX1D.NCT 203.00

2 x 1/2 x 2 15 15 330 2XDX2.BCT * 102.04 2XDX2.NCT 191.492 x 3/4 x 1 15 15 250 2XEX1.BCT 117.44 2XEX1.NCT 203.00

2 x 3/4 x 1-1/4 15 15 424 2XEX1B.BCT 117.44 2XEX1B.NCT 203.002 x 3/4 x 1-1/2 15 15 410 2XEX1D.BCT * 117.44 2XEX1D.NCT 191.49

2 x 3/4 x 2 15 15 380 2XEX2.BCT * 93.23 2XEX2.NCT 198.542 x 3/4 x 2-1/2 10 10 360 2XEX2D.BCT 220.35 2XEX2D.NCT 386.14

2 x 1 x 3/4 15 15 250 2X1XE.BCT * 114.67 2X1XE.NCT 203.002 x 1 x 1 15 15 240 2X1X1.BCT * 114.66 2X1X1.NCT 191.49

2 x 1 x 1-1/4 15 15 300 2X1X1B.BCT 117.44 2X1X1B.NCT 203.002 x 1 x 1-1/2 15 15 413 2X1X1D.BCT * 95.39 2X1X1D.NCT 203.00

2 x 1 x 2 15 15 370 2X1X2.BCT * 102.85 2X1X2.NCT 188.312 x 1 x 2-1/2 10 10 560 2X1X2D.BCT 220.37 2X1X2D.NCT 386.14

2 x 1-1/4 x 1/2 15 15 244 2X1BXD.BCT 117.44 2X1BXD.NCT 191.492 x 1-1/4 x 3/4 1 1 250 2X1BXE.BCT 139.562 x 1-1/4 x 1 15 15 310 2X1BX1.BCT * 114.66 2X1BX1.NCT 203.00

2 x 1-1/4 x 1-1/4 15 15 300 2X1BX1B.BCT * 102.04 2X1BX1B.NCT 166.672 x 1-1/4 x 1-1/2 15 15 363 2X1BX1D.BCT * 117.44 2X1BX1D.NCT 203.00

2 x 1-1/4 x 2 15 15 396 2X1BX2.BCT * 88.77 2X1BX2.NCT 169.192 x 1-1/4 x 2-1/2 10 10 556 2X1BX2D.BCT 220.37 2X1BX2D.NCT 386.142 x 1-1/2 x 1/2 15 15 239 2X1DXD.BCT * 74.50 2X1DXD.NCT 188.312 x 1-1/2 x 3/4 15 15 273 2X1DXE.BCT * 74.50 2X1DXE.NCT 188.312 x 1-1/2 x 1 15 15 289 2X1DX1.BCT * 65.10 2X1DX1.NCT 188.31

2 x 1-1/2 x 1-1/4 15 15 363 2X1DX1B.BCT * 101.94 2X1DX1B.NCT 167.462 x 1-1/2 x 1-1/2 15 15 346 2X1DX1D.BCT * 99.98 2X1DX1D.NCT 195.78

2 x 1-1/2 x 2 15 15 400 2X1DX2.BCT * 88.77 2X1DX2.NCT 160.772 x 1-1/2 x 2-1/2 10 10 628 2X1DX2D.BCT 190.21 2X1DX2D.NCT 386.14

2 x 2 x 1/2 15 15 290 2XD.BCT * 65.10 2XD.NCT 188.312 x 2 x 3/4 15 15 310 2XE.BCT * 65.10 2XE.NCT 188.312 x 2 x 1 15 15 339 2X1.BCT * 65.10 2X1.NCT 188.31

2 x 2 x 1-1/4 15 15 364 2X1B.BCT * 73.11 2X1B.NCT 188.312 x 2 x 1-1/2 15 15 396 2X1D.BCT * 77.26 2X1D.NCT 199.172 x 2 x 2-1/2 10 10 550 2X2D.BCT * 165.71 2X2D.NCT 308.32

2 x 2 x 3 6 6 922 2X3.BCT 298.81 2X3.NCT 582.072-1/2 x 1/2 x 2-1/2 10 10 549 2DXDX2D.BCT 198.96 2DXDX2D.NCT 372.15

2-1/2 x 3/4 x 2 10 10 440 2DXEX2.BCT 194.41 2DXEX2.NCT 378.822-1/2 x 3/4 x 2-1/2 10 10 532 2DXEX2D.BCT 194.41 2DXEX2D.NCT 372.15

2-1/2 x 1 x 3/4 10 10 280 2DX1XE.BCT 220.35 2-1/2 x 1 x 1-1/4 10 10 388 2DX1X1B.BCT 220.35 2DX1X1B.NCT 378.82

2-1/2 x 1 x 2 10 10 470 2DX1X2.BCT 220.37 2DX1X2.NCT 378.822-1/2 x 1 x 2-1/2 10 10 525 2DX1X2D.BCT 194.54 2DX1X2D.NCT 378.822-1/2 x 1-1/4 x 1 10 10 394 2DX1BX1.BCT 220.35 2DX1BX1.NCT 403.39

2-1/2 x 1-1/4 x 1-1/4 10 10 380 2DX1BX1B.BCT 220.35 2DX1BX1B.NCT 403.392-1/2 x 1-1/4 x 2 10 10 557 2DX1BX2.BCT 220.37 2DX1BX2.NCT 311.04

2-1/2 x 1-1/4 x 2-1/2 10 10 520 2DX1BX2D.BCT 220.37 2DX1BX2D.NCT 311.042-1/2 x 1-1/2 x 1/2 10 10 376 2DX1DXD.BCT 207.88 2DX1DXD.NCT 403.39

2-1/2 x 1-1/2 x 1-1/4 10 10 446 2DX1DX1B.BCT 220.35 2DX1DX1B.NCT 403.392-1/2 x 1-1/2 x 1-1/2 10 10 601 2DX1DX1D.BCT 220.37 2DX1DX1D.NCT 317.03

2-1/2 x 1-1/2 x 2 10 10 558 2DX1DX2.BCT 220.37 2DX1DX2.NCT 386.142-1/2 x 1-1/2 x 2-1/2 10 10 535 2DX1DX2D.BCT 220.37 2DX1DX2D.NCT 386.14

2-1/2 x 2 x 1/2 10 10 350 2DX2XD.BCT 220.37 2DX2XD.NCT 386.142-1/2 x 2 x 3/4 10 10 433 2DX2XE.BCT 186.34 2DX2XE.NCT 311.042-1/2 x 2 x 1 10 10 440 2DX2X1.BCT 190.04 2DX2X1.NCT 386.14

2-1/2 x 2 x 1-1/4 10 10 412 2DX2X1B.BCT 220.37 2DX2X1B.NCT 364.272-1/2 x 2 x 1-1/2 10 10 574 2DX2X1D.BCT 211.24 2DX2X1D.NCT 317.03

2-1/2 x 2 x 2 10 10 537 2DX2X2.BCT 194.54 2DX2X2.NCT 364.272-1/2 x 2 x 2-1/2 10 10 575 2DX2X2D.BCT 190.89 2DX2X2D.NCT 378.82

2-1/2 x 2 x 3 6 6 888 2DX2X3.BCT 331.16 2DX2X3.NCT 477.93

Fig. 25


CAST IRON REDUCING TEESCLASS 125(continued)

2-1/2 x 2-1/2 x 1/2 10 10 490 2DXD.BCT 211.24 2DXD.NCT 386.142-1/2 x 2-1/2 x 3/4 10 10 475 2DXE.BCT 190.04 2DXE.NCT 364.272-1/2 x 2-1/2 x 1 10 10 469 2DX1.BCT 186.34 2DX1.NCT 357.39

2-1/2 x 2-1/2 x 1-1/4 10 10 450 2DX1B.BCT 190.04 2DX1B.NCT 364.272-1/2 x 2-1/2 x 1-1/2 10 10 500 2DX1D.BCT 194.54 2DX1D.NCT 386.14

2-1/2 x 2-1/2 x 2 10 10 610 2DX2.BCT 190.04 2DX2.NCT 364.272-1/2 x 2-1/2 x 3 6 6 958 2DX3.BCT 331.16 2DX3.NCT 611.31

3 x 1 x 3 6 6 822 3X1X3.BCT 331.16 3X1X3.NCT 582.073 x 1-1/4 x 3 6 6 838 3X1BX3.BCT 331.16 3X1BX3.NCT 582.07

3 x 1-1/2 x 1-1/2 6 6 675 3X1DX1D.BCT 331.22 3X1DX1D.NCT 501.953 x 1-1/2 x 2 6 6 650 3X1DX2.BCT 331.22 3X1DX2.NCT 611.313 x 1-1/2 x 3 6 6 830 3X1DX3.BCT 331.16 3X1DX3.NCT 582.073 x 2 x 1-1/2 6 6 650 3X2X1D.BCT 331.16 3X2X1D.NCT 582.07

3 x 2 x 2 6 6 615 3X2X2.BCT 331.16 3X2X2.NCT 549.113 x 2 x 2-1/2 6 6 850 3X2X2D.BCT 315.62 3X2X2D.NCT 576.73

3 x 2 x 3 6 6 780 3X2X3.BCT 331.16 3X2X3.NCT 582.073 x 2-1/2 x 1-1/4 6 6 658 3X2DX1B.BCT 315.62 3X2DX1B.NCT 576.733 x 2-1/2 x 1-1/2 1 1 623 3X2DX1D.BCT 448.54

3 x 2-1/2 x 2 6 6 837 3X2DX2.BCT 331.16 3X2DX2.NCT 549.113 x 2-1/2 x 2-1/2 6 6 780 3X2DX2D.BCT 331.16 3X2DX2D.NCT 549.11

3 x 2-1/2 x 3 6 6 850 3X2DX3.BCT 331.16 3X2DX3.NCT 582.073 x 3 x 3/4 6 6 595 3XE.BCT 468.713 x 3 x 1 6 6 660 3X1.BCT 278.94 3X1.NCT 477.93

3 x 3 x 1-1/4 6 6 584 3X1B.BCT 305.16 3X1B.NCT 477.933 x 3 x 1-1/2 6 6 840 3X1D.BCT 331.16 3X1D.NCT 477.93

3 x 3 x 2 6 6 800 3X2.BCT 284.84 3X2.NCT 549.113 x 3 x 2-1/2 6 6 775 3X2D.BCT 331.16 3X2D.NCT 549.11

3 x 3 x 4 1 1 1280 3X4.BCT 849.794 x 1 x 4 4 4 1392 4X1X4.BCT 574.39 4X1X4.NCT 1164.01

4 x 1-1/2 x 4 4 4 1325 4X1DX4.BCT 630.07 4X1DX4.NCT 1164.014 x 2 x 2 4 4 875 4X2X2.BCT 677.35 4X2X2.NCT 1164.014 x 2 x 4 4 4 1360 4X2X4.BCT 661.22 4X2X4.NCT 1164.01

4 x 2-1/2 x 2-1/2 4 4 1083 4X2DX2D.BCT 810.14 4X2DX2D.NCT 1098.114 x 2-1/2 x 4 4 4 1400 4X2DX4.BCT 661.22 4X2DX4.NCT 1098.114 x 3 x 1-1/2 4 4 1058 4X3X1D.BCT 677.35 4X3X1D.NCT 1164.01

4 x 3 x 2 4 4 1200 4X3X2.BCT 677.35 4X3X2.NCT 1164.014 x 3 x 2-1/2 4 4 1270 4X3X2D.BCT 630.07 4X3X2D.NCT 1164.01

4 x 3 x 3 4 4 1160 4X3X3.BCT 870.85 4X3X3.NCT 1164.014 x 3 x 4 4 4 1500 4X3X4.BCT 661.22 4X3X4.NCT 1098.11

4 x 3-1/2 x 4 2 2 1805 4X3DX4.BCT 665.32 4X3DX4.NCT 1385.554 x 4 x 1 1 1 980 4X1.BCT 862.19

4 x 4 x 1-1/4 4 4 978 4X1B.BCT 778.624 x 4 x 1-1/2 4 4 1108 4X1D.BCT 661.22 4X1D.NCT 1098.11

4 x 4 x 2 4 4 1117 4X2.BCT 583.21 4X2.NCT 1164.014 x 4 x 2-1/2 4 4 1238 4X2D.BCT 609.33 4X2D.NCT 1098.11

4 x 4 x 3 4 4 1410 4X3.BCT 645.88 4X3.NCT 1164.015 x 5 x 3 1 1 2000 5X3.BCT 1605.455 x 5 x 4 1 1 2383 5X4.BCT 1558.366 x 6 x3 1 1 2670 6X3.BCT 1917.216 x 6 x 4 1 1 3043 6X4.BCT 2063.856 x 6 x 5 1 1 3523 6X5.BCT 2003.44

Fig. 25



WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1/2 50 50 87 D.BCCR 51.84 D.NCCR 90.213/4 30 30 130 E.BCCR 51.84 E.NCCR 74.071 25 25 178 1.BCCR * 60.39 1.NCCR 125.68

1-1/4 15 15 295 1B.BCCR * 85.17 1B.NCCR 138.711-1/4 x 1 15 15 215 1BX1.BCCR 97.88 1BX1.NCCR 176.74

1-1/2 10 10 350 1D.BCCR * 118.20 1D.NCCR 213.121-1/2 x 1-1/4 1 1 280 1DX1B.BCCR 146.39

1-1/2 x 1-1/4 x 1 1 1 303 1DX1BX1.BCCR 201.441-1/2 x 1-1/4 x 1 x 1 12 12 268 1DX1BX1X1.BCCR * 146.39

1-1/2 x 1 10 10 262 1DX1.BCCR 116.41 1DX1.NCCR 215.181-1/2 x 1 x 1 x 1 12 12 259 1DX1X1X1.BCCR * 162.68

2 8 8 650 2.BCCR * 163.56 2.NCCR 334.872 x 1 8 8 352 2X1.BCCR 159.37 2X1.NCCR 335.35

2 x 1-1/4 1 1 373 2X1B.BCCR 187.592 x 1-1/2 1 1 410 2X1D.BCCR 168.03

2 x 1-1/2 x 1 x 1 1 1 367 2X1DX1X1.BCCR 252.544 1 1 1950 4.BCCR 1206.02


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1-1/4 x 1-1/4 x 3/4 1 1 321 1BXE.BC250T 235.801-1/2 x 1-1/2 x 3/4 1 1 402 1DXE.BC250T 350.23

2 x 2 x 3/4 1 1 615 2XE.BC250T 386.322 x 2 x 1-1/2 1 1 760 2X1D.BC250T 497.65

CAST IRON CROSSESCLASS 125

CAST IRON REDUCING TEESCLASS 250


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

3/4 x 1/2 50 50 44 EXD.BR 33.74 EXD.NR 45.541 x 1/2 50 50 58 1XD.BR * 17.26 1XD.NR 54.131 x 3/4 50 50 67 1XE.BR * 22.89 1XE.NR 64.91

1-1/4 x 1/2 50 50 96 1BXD.BR * 68.171-1/4 x 3/4 50 50 99 1BXE.BR * 50.68 1BXE.NR 109.211-1/4 x 1 50 50 105 1BX1.BR * 59.30 1BX1.NR 111.05

1-1/2 x 1/2 1 1 105 1DXD.BR 107.101-1/2 x 3/4 40 40 127 1DXE.BR 96.37 1DXE.NR 323.881-1/2 x 1 40 40 150 1DX1.BR * 83.91 1DX1.NR 164.17

1-1/2 x 1-1/4 40 40 135 1DX1B.BR * 83.91 1DX1B.NR 164.172 x 1/2 30 30 175 2XD.BR 121.84 2XD.NR 214.852 x 3/4 30 30 172 2XE.BR * 109.74 2XE.NR 214.852 x 1 30 30 172 2X1.BR * 97.71 2X1.NR 223.47

2 x 1-1/4 30 30 204 2X1B.BR * 114.66 2X1B.NR 227.722 x 1-1/2 30 30 209 2X1D.BR * 109.74 2X1D.NR 186.98

2-1/2 x 1-1/2 18 18 325 2DX1D.BR 173.43 2DX1D.NR 286.002-1/2 x 2 18 18 300 2DX2.BR 155.97 2DX2.NR 248.933 x 1-1/2 12 12 458 3X1D.BR 264.73 3X1D.NR 323.04

3 x 2 12 12 435 3X2.BR 191.15 3X2.NR 309.343 x 2-1/2 1 1 440 3X2D.BR 247.36

4 x 2 1 1 605 4X2.BR 507.014 x 2-1/2 1 1 780 4X2D.BR 507.01

4 x 3 1 1 700 4X3.BR 507.016 x 4 1 1 1335 6X4.BR 918.97

CAST IRON REDUCING COUPLINGSCLASS 125

Fig. 30A

Fig. 29



WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

3/4 x 1/2 50 50 45 EXD.BER 71.00 EXD.NER 127.831 x 1/2 50 50 64 1XD.BER 74.53 1XD.NER 147.611 x 3/4 50 50 69 1XE.BER 76.68 1XE.NER 138.04

1-1/4 x 1/2 50 50 91 1BXD.BER 122.50 1BXD.NER 220.551-1/4 x 3/4 50 50 96 1BXE.BER 111.01 1BXE.NER 199.811-1/4 x 1 50 50 89 1BX1.BER 114.22 1BX1.NER 205.61

1-1/2 x 1/2 40 40 117 1DXD.BER 154.23 1DXD.NER 308.501-1/2 x 3/4 40 40 110 1DXE.BER 161.96 1DXE.NER 291.521-1/2 x 1 40 40 127 1DX1.BER 161.96 1DX1.NER 291.52

1-1/2 x 1-1/4 40 40 141 1DX1B.BER 154.86 1DX1B.NER 278.702 x 1/2 1 1 183 2XD.BER 216.332 x 3/4 25 25 185 2XE.BER 233.35 2XE.NER 466.672 x 1 30 30 195 2X1.BER 211.40 2X1.NER 370.90

2 x 1-1/4 30 30 205 2X1B.BER 201.30 2X1B.NER 362.362 x 1-1/2 30 30 214 2X1D.BER 205.34 2X1D.NER 369.642-1/2 x 1 1 1 258 2DX1.BER 335.48

2-1/2 x 1-1/4 1 1 265 2DX1B.BER 335.482-1/2 x 1-1/2 12 12 265 2DX1D.BER * 321.04

2-1/2 x 2 10 10 308 2DX2.BER * 313.57 2DX2.NER 559.963 x 1 1 1 367 3X1.BER 529.80

3 x 1-1/4 1 1 388 3X1B.BER 529.803 x 1-1/2 1 1 383 3X1D.BER 451.36

3 x 2 10 10 403 3X2.BER * 388.773 x 2-1/2 1 1 468 3X2D.BER 488.214 x 1-1/4 1 1 658 4X1B.BER 955.844 x 1-1/2 1 1 661 4X1D.BER 889.16

4 x 2 1 1 600 4X2.BER 914.70

CAST IRON ECCENTRIC REDUCERS CLASS 125


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1 x 4-1/4 10 10 166 1X4B.BCF * 92.63 1X4B.NCF 209.711-1/4 x 4-5/8 10 10 205 1B.BCF * 110.85 1B.NCF 240.76

1-1/2 x 5 10 10 261 1DX5.BCF * 102.44 1DX5.NCF 246.312 x 6 6 6 444 2X6.BCF 102.22 2X6.NCF 216.61

2-1/2 x 7 6 6 607 2DX7.BCF 119.60 2DX7.NCF 253.403 x 7-1/2 5 5 764 3X7D.BCF 154.05 3X7D.NCF 307.93

4 x 9 5 5 1188 4X9.BCF * 207.61 4X9.NCF 419.405 x 10 1 1 1358 5X10.BCF 293.29 5X10.NCF 658.456 x 11 3 3 1745 6X11.BCF 331.83 6X11.NCF 703.79

8 x 13-1/2 1 1 3000 8X13D.BCF 523.78 8X13D.NCF 1222.0710 x 16 1 1 4200 10X16.BCF 928.28 10X16.NCF 1840.59

COMPANION FLANGES THREADEDCLASS 125


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

2-1/2 6 6 225 2D.BCCAP 103.38 2D.NCCAP 178.213 6 6 375 3.BCCAP 136.02 3.NCCAP 226.634 5 5 600 4.BCCAP 195.66 4.NCCAP 366.335 6 6 1014 5.BCCAP 297.88 5.NCCAP 574.956 3 3 1910 6.BCCAP 373.24 6.NCCAP 1478.568 1 1 2825 8.BCCAP 1105.70 8.NCCAP 2068.55

CAST IRON PIPE CAPSCLASS 125

Fig. 29E

Fig. 30

Fig. 20



WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

3/4 x 5 10 10 300 EX5.BRF 267.78 EX5.NRF 436.371 x 5 10 10 300 1X5.BRF 273.79 1X5.NRF 436.371 x 6 6 6 450 1X6.BRF 260.97 1X6.NRF 416.78

1 x 7-1/2 5 5 810 1X7D.BRF 395.04 1X7D.NRF 633.791-1/4 x 6 6 6 400 1BX6.BRF 250.06 1BX6.NRF 422.83

1-1/4 x 7-1/2 5 5 800 1BX7D.BRF 395.04 1BX7D.NRF 610.881-1/2 x 6 6 6 425 1DX6.BRF 214.03 1DX6.NRF 422.831-1/2 x 7 6 6 637 1DX7.BRF 275.97 1DX7.NRF 431.43

1-1/2 x 7-1/2 5 5 825 1DX7D.BRF 330.86 1DX7D.NRF 655.131-1/2 x 9 5 5 1394 1DX9.BRF 488.70 1DX9.NRF 829.911-1/2 x 11 1 1 2410 1DX11.BRF 860.18 1DX11.NRF 1428.48

2 x 7 6 6 615 2X7.BRF 200.23 2X7.NRF 465.952 x 7-1/2 5 5 800 2X7D.BRF 266.98 2X7D.NRF 627.76

2 x 9 1 1 1403 2X9.BRF 362.86 2X9.NRF 879.502 x 10 1 1 1850 2X10.BRF 668.76 2X10.NRF 1070.442 x 11 1 1 2450 2X11.BRF 663.62 2X11.NRF 1323.22

2 x 13-1/2 1 1 3080 2X13D.BRF 1216.30 2X13D.NRF 2193.632-1/2 x 7-1/2 5 5 800 2DX7D.BRF 286.50 2DX7D.NRF 655.13

2-1/2 x 9 1 1 1450 2DX9.BRF 389.36 2DX9.NRF 829.912-1/2 x 10 1 1 1850 2DX10.BRF 668.76 2DX10.NRF 1070.442-1/2 x 11 1 1 2225 2DX11.BRF 788.46 2DX11.NRF 1419.78

3 x 9 1 1 1313 3X9.BRF 362.86 3X9.NRF 879.503 x 10 1 1 1750 3X10.BRF 670.77 3X10.NRF 1048.703 x 11 1 1 2200 3X11.BRF 663.62 3X11.NRF 1323.22

3 x 13-1/2 1 1 3900 3X13D.BRF 1216.30 3X13D.NRF 2180.273-1/2 x 9 5 5 1250 3DX9.BRF 440.12 3DX9.NRF 901.65

4 x 10 1 1 1600 4X10.BRF 561.51 4X10.NRF 1127.324 x 11 1 1 2012 4X11.BRF 547.27 4X11.NRF 1310.27

4 x 13-1/2 1 1 4056 4X13D.BRF 936.74 4X13D.NRF 1944.055 x 11 1 1 1900 5X11.BRF 693.62 5X11.NRF 1323.22

5 x 13-1/2 1 1 4000 5X13D.BRF 1314.73 5X13D.NRF 1985.686 x 13-1/2 1 1 3800 6X13D.BRF 849.16 6X13D.NRF 2089.43

CAST IRON REDUCING FLANGES THREADEDCLASS 125


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

3/8 25 150 36 C.BCFF 30.29 C.NCFF 58.931/2 30 120 46 D.BCFF * 31.16 D.NCFF 77.823/4 30 120 48 E.BCFF * 31.16 E.NCFF 77.821 30 60 97 1.BCFF * 39.10 1.NCFF 71.00

1-1/4 30 60 80 1B.BCFF * 39.10 1B.NCFF 94.381-1/2 20 40 137 1D.BCFF * 50.35 1D.NCFF 120.97

2 15 30 215 2.BCFF * 60.54 2.NCFF 153.563 10 10 225 3.BCFF 45.28 4 10 10 450 4.BCFF 88.61

CAST IRON FLOOR FLANGES CLASS 125


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1 x 4-1/4 10 10 150 1X4B.BBF 147.46 1X4B.NBF 252.561-1/4 x 4-5/8 10 10 200 1B.BBF 155.79

1-1/2 x 5 10 10 275 1DX5.BBF 165.38 1DX5.NBF 281.272 x 6 6 6 450 2X6.BBF 186.86 2X6.NBF 292.63

2-1/2 x 7 6 6 675 2DX7.BBF 205.37 2DX7.NBF 341.313 x 7-1/2 5 5 850 3X7D.BBF 246.15 3X7D.NBF 425.95

4 x 9 1 1 1456 4X9.BBF 315.28 4X9.NBF 596.165 x 10 1 1 2000 5X10.BBF 512.27 5X10.NBF 973.326 x 11 1 1 2475 6X11.BBF 557.28 6X11.NBF 1033.28

8 x 13-1/2 1 1 4200 8X13D.BBF 874.34 8X13D.NBF 1366.0110 x 16 1 1 6044 10X16.BBF 1293.49 10X16.NBF 2282.04

CAST IRON BLIND FLANGES CLASS 125

Fig. 71

Fig. 19

Fig. 15



WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1/2 1 1 150 D.BFU 161.96 D.NFU 413.623/4 1 1 250 E.BFU 225.70 E.NFU 474.141 1 1 225 1.BFU 218.68 1.NFU 474.14

1-1/4 1 1 329 1B.BFU 258.65 1B.NFU 593.781-1/2 7 7 350 1D.BFU 238.69 1D.NFU 732.15

2 7 7 600 2.BFU 280.94 2.NFU 753.472-1/2 4 4 1000 2D.BFU 380.43 2D.NFU 1134.133-1/2 4 4 1250 3D.BFU 730.10 3D.NFU 1953.87

3 4 4 1115 3.BFU 430.35 3.NFU 1503.564 3 3 1450 4.BFU 585.17 4.NFU 1994.785 2 2 2500 5.BFU 1363.88 5.NFU 2237.376 2 2 2850 6.BFU 1280.27 6.NFU 2556.32


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1/2 1 1 75 D.BC250L 64.963/4 40 40 112 E.BC250L 66.141 1 1 169 1.BC250L 79.99

1-1/4 1 1 292 1B.BC250L 119.071-1/2 1 1 386 1D.BC250L 147.72

2 6 6 643 2.BC250L * 182.292-1/2 1 1 1056 2D.BC250L 423.45


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1/2 1 1 67 D.BC25045L 88.593/4 1 1 104 E.BC25045L 89.371 1 1 160 1.BC25045L 107.29

1-1/4 1 1 270 1B.BC25045L 176.811-1/2 1 1 355 1D.BC25045L 194.51

2 1 1 617 2.BC25045L 276.652-1/2 1 1 938 2D.BC25045L 457.12

CAST IRON FLANGES UNIONSCLASS 125

CAST IRON 90° ELBOWS CLASS 250

CAST IRON 45° ELBOWS CLASS 250


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1-1/2 25 25 193 1D.BDL 72.53 1D.NDL 107.482 15 15 301 2.BDL 109.22 2.NDL 155.303 6 6 750 3.BDL 410.23 3.NDL 613.904 2 2 1150 4.BDL 649.71 4.NDL 1194.83

2 x 1-1/2 20 20 275 2X1D.BDL * 148.37 2X1D.NDL 170.67

CAST IRON DRAINAGE SHORT TURN 90° ELBOWS


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

3/8 1 1 70 C.BC250T 101.291/2 1 1 101 D.BC250T 101.473/4 1 1 153 E.BC250T 101.401 1 1 243 1.BC250T 122.41

1-1/4 1 1 394 1B.BC250T 182.571-1/2 1 1 531 1D.BC250T 234.93

2 1 1 873 2.BC250T 291.432-1/2 1 1 1423 2D.BC250T 595.13

CAST IRON STRAIGHT TEESCLASS 250

Fig. 14

Fig. 31



WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1-1/2 15 15 324 1D.BDXLTL 131.04 1D.NDXLTL 186.222 10 10 415 2.BDXLTL 226.63 2.NDXLTL 298.09


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1-1/2 25 25 182 1D.BD60L 131.27 1D.ND60L 203.662 15 15 270 2.BD60L 150.66 2.ND60L 199.30


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1-1/2 15 15 210 1D.BDLT45L 99.63 1D.NDLT45L 120.912 10 10 310 2.BDLT45L * 169.84 2.NDLT45L 213.33


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1-1/2 25 25 149 1D.BD22L 89.37 1D.ND22L 115.192 15 15 260 2.BD22L 119.05 2.ND22L 172.31

DRAINAGE EXTRA LONG TURN 90° ELBOWS

DRAINAGE SHORT TURN 60° ELBOWS

DRAINAGE LONG TURN 45° ELBOWS

DRAINAGE SHORT TURN 22-1/2° ELBOWS


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1-1/4 25 25 135 1B.BD45L 68.01 1B.ND45L 104.021-1/2 25 25 168 1D.BD45L 70.89 1D.ND45L 106.22

2 15 15 257 2.BD45L 102.35 2.ND45L 152.003 6 6 694 3.BD45L 400.86 3.ND45L 529.094 2 2 1100 4.BD45L 626.59 4.ND45L 864.50

DRAINAGE SHORT TURN 45° ELBOWS


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1-1/2 15 15 216 1D.BDLTL 101.48 1D.NDLTL 122.212 10 10 360 2.BDLTL 151.11 2.NDLTL 209.793 5 5 838 3.BDLTL * 551.13 3.NDLTL 649.13

DRAINAGE LONG TURN 90° ELBOWS


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1-1/2 25 25 180 1D.BDSTL 103.38 1D.NDSTL 136.122 15 15 260 2.BDSTL 136.88 2.NDSTL 213.32

DRAINAGE STREET 90° ELBOWS


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1-1/2 25 25 155 1D.BDST45L 96.56 1D.NDST45L 140.852 15 15 240 2.BDST45L 156.32 2.NDST45L 216.76

DRAINAGE STREET 45° ELBOWS


WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1-1/2 25 25 165 1D.BD11L 95.11 1D.ND11L 123.18DRAINAGE SHORT TURN 11-1/4° ELLS

Fig. 33

Fig. 78

Fig. 37

Fig. 32

Fig. 34

Fig. 75

Fig. 35

Fig. 36

Fig. 74



WEIGHT PER 100

PART # BLACK

PRICE (US$) BLACK

PART # GALV.

PRICE (US$) GALV.

1-1/2 15 15 320 1D.BDTY 117.03 1D.NDTY 163.542 10 10 486 2.BDTY 192.90 2.NDTY 267.274 1 1 2000 4.BDTY 1052.33 4.NDTY 1290.16

2 x 1-1/2 10 10 370

Date post:	31-Jan-2021
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

WARD FITTINGS · 2020. 12. 23. · WARD FITTINGS PRICE SCHEDULE #300121_rev1 EFFECTIVE: JANUARY 11,...

Documents