Date post: | 17-Jul-2015 |
Category: |
Technology |
Upload: | sangone-kim |
View: | 349 times |
Download: | 4 times |
Washing Machine Testing Equipment
We supply only Reliable Accurate Smart Equipment
Washing Machine Elements Test Equipment
- 2
-
HMI/SCADA
Washing MC machining, assembly, test, inspect data-logging systemms.
With LabVIEW DSC, we can interactively develop a distributed monitoring and control product assembly
and test systems. It includes tools for logging data to a networked historical database, real-time and historical trending, managing alarms and events, networking LabVIEW Real-Time targets and OPC
devices into one complete system, and adding security to user interfaces. Graphical development for HMI and distributed monitoring and control applications
OPC client and Modbus for data sharing and integrating third-party devices
Configuration-based real-time and historical trending, alarms, and event handling
Built-in networked database for distributed data logging
User-level security for applications
Unlimited tags to connect to PACs and PLCs
Washing Machine Elements Test Equipment
- 3
-
Ball Bearing Rotating Endurance Test
To simulate failure, quality and reliability of the ball bearing elements load, speed and forces in axial and radial direction, friction of bearing to be verified by using torque transducer, speed transducer and temperature sensor. An external axial and radial charge is realized by actuating pneumatic pressure into device’s house. And the force applied it to be controlled precision rate by precision regulator. Lubrication chamber to be used to controls the
bearing temperature. The testing rolling bearings are lubricated by oil-mist lubrication, realized by a separated oil-mist device. An optional vibration sensor on the spindle is used to
determine the bearing failure. Calibration of this sensor need to be made for each type of hub assembly tested to accurately account for any background noise. A temperature sensor can be used to detect the bearing failure caused by excessive heat generation. Sound noise, vibration sound insulation shall be tested with optional instrument and sensors.
TEST ITEM
1) Performance Test
Friction Check Test
Bearing stiffness test
Measure the elongation with radial and axial directional load
2) Environmental test
High temperature lubrication test
3) Life test
Durability test with applying load
Specifications
Rotation ring: Inner ring
Shaft rotation speed: 1000rpm
Radial load: 0~500N
Rotating time: 3000h
Lubrication Chamber: Oil Chiller
Temperature: High/Low Lubrication Test: -40~80℃
Washing Machine Elements Test Equipment
- 4
-
Test Fixture The test fixture consists of a shaft with a hub mounted on one end and a load absorber on the
other.
Load Application Pneumatic servo actuators mounted at radial and axle direction under the test bench are used to provide the required to actuate rotational torque and speed. Rotational Torque Load cells are installed for the feedback of the bearing forces to the controller. The tester is programmed to test for a variety of friction load capacities.
Control System The control system considered for the bearing tester center around a programmable controller. Monitors the shaft speed, once the desired speed is achieved the loading process begins. An optional vibration sensor on the spindle is used to determine the bearing failure. Calibration of this sensor need to be made for each type of hub assembly tested to accurately account for any background noise. A temperature sensor can be used to detect the bearing failure caused by excessive heat generation.
Washing Machine Elements Test Equipment
- 5
-
Belt Test
Introduction This testing equipment will be use to test performance, environment and durability of the belt
elements of the washing machine. To simulate failure, quality and reliability of elements load speed and forces to the belt in the thermal chamber, it will be evaluated assurance of it. Also sound noise, vibration, friction of belt by sound insulation shall be tested with optional instrument and sensors.
Design The washing mc belt elements test equipment involves the
fixture of shaft and bearing adaptor and slide plate for mounting test specimens. This equipment shall be used servo motor to control speed and stepping motor to control tension load of belt. The environment condition will be simulated by the thermal chamber. The tension loads 0 to 500N. The operated speed is
variable 0 to 1,000 rpm, and temperature to be -20 to 80℃.
Test Fixture The test fixture consists of a shaft with a hub mounted on
one end and a pulley on the other. The fixture is provided with a special bearing hub and spindle assembly.
Load Application Electric servo motors mounted under the test bench are used to provide the required to actuate rotational torque and speed through bearing, shaft and belt. This load is transmitted through an actuator that is designed to carry tension load. Load cells are installed in line with the cylinders for the feedback of the bearing forces to the
controller. The tester is programmed to test for a variety of load capacities.
Actuator System The design requires a background in electric motors including eng and parts selection of gears.
Control System The control system considered
for the bearing tester center around a programmable controller. An optioanal vibration sensor
on the spindle is used to determine the bearing failure. Calibration of this sensor need to be made for each type of hub assembly tested to accurately account for any background noise. A temperature sensor can be used to detect the bearing failure caused by excessive heat generation.
Washing Machine Elements Test Equipment
- 6
-
Damper Test
Introduction Damper test equipment is used to test one or
multiple damping force proportional to the speed of shaft movement. This is a machine that compresses and extends a damper at known speeds and measure the forces produced by the damper. The form of a damp test machine constructed a frame holding an electric motor with a drive reducing gear that spins a crank attached to the damper shaft through a linear bearing. Bolt holes in the crank allow several different stroke lengths.
On the top, there is placed a load cell, which measures the damper force and movement is measured using a displacement sensor. This machine is tested for several spin velocities, from rated to 200rpm. The possible stroke setting is 0 to 25mm.
After an initial user-defined compression, software calculates hundreds of instantaneous spring rates during a controlled release of the spring through the test and preload ranges. The instrument has an RS232 interface, optional memory card reader or USB to store the results on a computer. The overload protecting function can make the machine safe. It can hold the peak value. The load display can be translated among Newton(N), Kilogram(Kg) and Pound(Lb). Force
sensors are available to provide high levels of precision for damper with low force levels. Supplied with a fixed clamp to keep the plates parallel during the tests. Available as options for tensile testing, in 4 capacities: , 100N, 200 N, 500 N, 1000 N. Data acquisition was made with a The force vs. shaft speed graphs you see in this article come from data generated by testing a damper in what is generally known as a damper dynamometer.
Washing Machine Elements Test Equipment
- 7
-
Shaking Test Air Cooled Shakers Air-cooled shakers are the workhorses for many component
testing applications such as automotive assemblies and consumer electronics equipment. The equipment range includes many shaker models with axial guidance bearings and 2 inches (50mm displacement). This has been proven to be a highly reliable, high performance shaker which is available in several configurations. Optional features include: automatic armature centering, economy field supply, vertical isolation mounts, isolated trunnions, air glides, chamber interfaces, and monobase systems for three axis testing.
1 Shaker
Max. Sine Force : 600 kgf
Max. Random Force : 600 kgf rms
Max. Displacement : 25 mm. p-p
Max. Acceleration : 100 g
Max. Velocity : 2.0 m/s
Max. Payload : 120 kg
Frequency Range : 1 ~ 4,000 Hz
Air Cooled
2 Power Amplifier
Amplifier Rating : 3KVA
3 Cookring air blower
Air Flower Rate: 0.1 m/s, Air Pressure: 1 kpa
4 Standard Vertical Pneumatic Load Support
5 Square Type Head Expander
Material: Mg. Alloy
Useable Frequency(Hz): 2000Hz
Effective Mass(nominal): 12kg
6 Steering Wheel Column Mounting JIG
2 Channel VibrationVIEW Controller
7 Seismic Sensor
- Kistler Accelerometer with 5 m cable
8. Vibration Controller
2 Channel VibrationVIEW Controller
Front End DSP Boxes, With Two Analog Inputs, One Analog Output(Drive)
9 Control Computer
- includes 19inch LCD monitor and Color Ink Printer
10 Software
Sine View
Sine Control Module.
Sine Resonance Phase Track & Dwell Control(SRTD).
Washing Machine Elements Test Equipment
- 8
-
Soleniod Water Valve Test
Electromagnetic and pressure character test
Automated solenoid valve testing machine is designed to test solenoid valve operating, durability and safety test as your specific test requirements.
Leaks are detected by pressure decay method or mass flow sensors. Both external and internal leaks are detected and quantified. Automatic part loading, unloading and pass/fail sorting increases throughput and reduces operator error. Interchangeable valve adapters permit multiple valve models to be tested on a single machine. Controller with graphical color touch screen operator
interface for easy operation and operator training. Test data logging and test report are available. Safety features include light curtain guards, dual hand switches, pressure relief valves and explosion shields. Emprise provides complete turn-key test stand
solutions including installation, setup and on-site operator training. One-year warranty with on-site service is included with each system.
Safety Test
Insulation: Resistance(DC500V) Voltage withstand(1500V) Environment Test
Vibration(150Hz)
Humidity(95%)
Freezing
Diaphragm doposition
Flow Character Test: Pressure resistance(Cv)
Comprehensive Test
Operating Voltage
Water Inner /Out Leak Test
Coil Resistance or Impedance Test
Coil Dielectric Test
Coil Current Test
Durability Test
Proof Pressure Test
High Frequency Cycling
Data Acquisition and Indicator
Port Flow, Pressure
Temperature
Electric Power: Volt, Ampare, Resistance
Automatic Calibration Capability
Washing Machine Elements Test Equipment
- 9
-
Washing Machine Life Test Facility
Quality temperature/humidity chambers
We design several type of environment test room shall be used in life testing of washing machine. This equipment operated under conditions of actual use in harsh environments. The environments temperature, simulated by the thermal chamber to be used in matched conditions. By simulating in the thermal chamber until failure, the quality and reliability of elements are assured.
Design
Stainless steel exterior
Energy-efficient refrigeration
Specialized humidity controls
Unique thermal break around door
Casters, cable port, shelf, & optional RS-232
ETL-listed electrical panel conforming to UL 508A
Out Size: about W3000XD25000XH18000mm
Inner Size: W2000XD2000XH1800mm
Temperature control: -5℃ to 50℃
Humidity
Washing Machine Elements Test Equipment
-
10 -
Spring Test KS Testing’s Digital Display Tension& Compression Testing
Machine is a new spring testing instrument, which is adapted to almost kinds of tension & compression spring test. Motorized spring performance test stand, fixed plate and adjustable plate, this unit can be used to test one or multiple low capacity tension and compression springs. The command automatically determines the origin of the displacements and then stops the machine at a predetermined flexion value to measure the height under load.
The form of a spring test machine constructed a frame holding an electric motor with a drive reducing gear that spins a crank attached to the damper shaft through a linear bearing. The servo electric motor is provided to test spring and analysis software guides the user through test creation and execution.
After an initial user-defined compression, software calculates hundreds of instantaneous spring rates during a controlled release of the spring through the test and preload ranges. The instrument has an RS232 interface, optional memory card reader or USB to store the results on a computer. The overload protecting function can make the machine safe. It can hold the peak value. Digital display function makes the displacement, load accuracy and prints testing report and spring stiffness.
The load display can be translated among Newton(N), Kilogram(Kg) and Pound(Lb). Force sensors are available to provide high levels of precision for springs with low force levels. Supplied with a fixed plate and a self-aligning plate to keep the plates parallel during the tests. Available as options for tensile testing, in 4 capacities: , 100N, 200 N, 500 N, 1000 N.
Detailed Product Description
Max. test load (N) 100N, 200 N, 500 N, 1000 N.
Min. test load of reading (%) 0.01 of FS
Max. distance between tension hooks (mm) 200 ~ 300
Max. distance between compression plate(mm) 150 ~ 250
Diameter of upper and lower plates(mm) Φ 60 ~ 100
Max. Stroke (mm) 70 ~ 150
Testing speed(mm/s) 1~50
Classification of machine Class 1
Displacement accuracy ≤±(50+0.15L)μm
Net weight (kg) 50 ~ 200
Power supply 220V, 50(60)Hz, 1phase
Washing Machine Elements Test Equipment
-
11 -
Shaft Test SHAFT, BEARING VIBRATION, UNBALANCE TEST RIG
The washing machine work cycle can be divided into several stages, and according to vibrations it is depending majority on the rotational speed of the drum and the unbalanced loads. This test bench unit includes a vibration-damped workholder plate, a speed-controlled drive motor with a tachometer, mass discs and bearing units, a coupling and balancing weights. The speed range involved during the cycle of normal washing machines is from 0 to 1200-1800 rpm. And this test machine is used to confirm the reliability of the fault diagnosis shaft and bearing elements of the washing mc rotor system, involving the dynamic characteristics of a driving disk with a simplified into a single-disk cantilever. The tachometer reference signal was located in phase
with the vibration sensors. And the unbalance weights were added to the drive end disk and vibration response was recorded. As well as the basic test measure of the vibration (vibration displacement, velocity and acceleration in the time or frequency, field balancing of bearing and shaft alignment test can also be carried out with optional analyzer. A range of shaft bearing diagnosis and monitoring can be carried out using just the base unit together with the computerized vibration analyser.
Washing Machine Elements Test Equipment
-
12 -
Pressure Sensor Test Test the Water Level Switch
The water level senses (switch) the water level in the wash tub. As water climbs inside the tube, it pushes on the air trapped inside and increases the air pressure. Custom water pressure sensor test stand should be used for automated testing. It is designed to test water pressure switch operating, durability and safety test as your specific test requirements. Leaks are detected by pressure decay method or mass flow sensors. Both external and internal leaks are detected and quantified. Automatic part loading, unloading and pass/fail sorting increases throughput and reduces operator error. Interchangeable valve adapters permit multiple valve models to be tested on a single machine.
Controller with graphical color touch screen operator interface for easy operation and operator training. Test data logging, network interface, bar code scanning and part marking are some of the options available. Safety features include light curtain guards, dual hand switches, pressure relief valves and explosion shields. Emprise provides complete turn-key test stand solutions including installation, setup and on-site operator training. One-year warranty with on-site service is included with each system. Safety Test
Insulation resistance: 100Mohm, DC500V Comprehensive Test Water level
Inner/Out Leak Test Fatigue Test
Washing Machine Elements Test Equipment
-
13 -
Drain Pump Test Stands
Some washers have an electric one and some washers have a pump that is connected to one side of the motor. When you put the washer in spin cycle you should have 120 or 220volts AC to the pump. If you are getting voltage to the pump
Custom water pump test stand should be
used for automated testing. It is designed to
test water pump operating, durability and
safety test as your specific test requirements.
Leaks are detected by pressure decay method
or mass flow sensors. Both external and
internal leaks are detected and quantified.
Automatic part loading, unloading and pass/fail
sorting increases throughput and reduces
operator error. Interchangeable valve adapters
permit multiple valve models to be tested on a
single machine.
Controller with graphical color touch screen
operator interface for easy operation and
operator training. Test data logging, network
interface, bar code scanning and part marking
are some of the options available. Safety
features include light curtain guards, dual hand
switches, pressure relief valves and explosion
shields. Emprise provides complete turn-key
test stand solutions including installation, setup
and on-site operator training. One-year warranty
with on-site service is included with each system.
Safety Test
Insulation resistance : 100Mohm, DC500V Voltage withstand : 1500v/1sec
Comprehensive Test Flowrate
Consumtion of Power
Water level
Coil Resistance or Impedance Test
Starting Voltage Test
Electric Power: Volt, Ampare, Resistance
Automatic Calibration Capability
Fatigue Test
Washing Machine Elements Test Equipment
-
14 -
Lock & Door Test
This washing machine door test machine can be used to determine whether or not the door could function for a certain time period, or how long it will last before it fails. It works by using the electric servo actuator or hydraulic/pneumatic actuator to open and close the door within a given amount of time and force. The force that it uses to open and close the door is controlled by the load cell. This information is then recorded and analyzed for further assessment.
Typical Testing Sequence
1. Open and close door with servo actuate as setting speeds.
2. Measure force needed to actuate the lock and door.
3. Report on all acquired data 4. Generate force vs. position
graphs
Lock Endurance Test Machine
This machine has been designed for Endurance testing of washing machine lock. The machine can be programmed by the user for testing any configuration of lock. The test sequence, number of steps, dwell time between steps, etc can be programmed by the user. Suitable fixture can be designed to accommodate physical variations. Measure minimum force needed to activate the switch
Safety Test
Insulation resistance : 100Mohm, DC500V Voltage withstand : 1500v/1sec
Comprehensive Test Contact resistance of micro S/w
Coil Resistance or Impedance Test
Electrical durability test:
The electrical durability testing of electrical contacts;
Electrical contacts rated at twice the rated voltage and current conditions connected to a resistor circuit;
Electrical durability testing, the electrical contacts should not affect the safety of the electric corrosion and traces.
Washing Machine Elements Test Equipment
-
15 -
Quality temperature/humidity chambers The system instrumentation include.
1. feedback control of speed, torque, tension and temperature, 2. monitoring power, torque, rpm, tension, generated heat 3. (option)vibration, sound analyzer.
Stainless steel exterior
Energy-efficient refrigeration
Specialized humidity controls
Unique thermal break around door
Casters, cable port, shelf, & optional RS-232
ETL-listed electrical panel conforming to UL 508A
Out Size: about W1000XD1000XH15000mm
Inner Size: 500X500X500mm
Temperature control: -40℃ to 200℃
Humidity 40~100%
.
Washing Machine Elements Test Equipment
16
KSTM’s UTM and fatigue testers are efficient, robust and are made in
the KOREA.
Our testing equipment are known for their superior performance,
accuracy and reliability. We has found various uses in different
industrial applications, including University, Laboratory, Quality
inspection, Automotive parts, Steel manufacture, Chemistries,
industries.
Our range includes test
Universal Testing Machines
Metal Testing, Plastic Testing
Fatigue Tester
Rotational Torque Test
Automotive Parts Testing Equipments
Bearing, Gear, Pump Test
Motor Dynamometer
Vibration, Seismic Tester and Simulator
Also we provides grips, fixtures and accessories including fluid baths, heating and cooling systems to meet a diverse set of testing requirements.
We have always achieved a good growth rate and success, which is a
result of our dedication, pursuance and efficient servic e to trade and
industry. Our strict adherence to supply and understanding of
customer requirements has made it possible for us to achieve a
position of repute in the industry. We are a customer-oriented
company and work in close coordination with our clients to provide
efficient solutions to their testing needs for steel, automotive
industries. We are capable to manufacture products as per the
requirements of our clients and our flexible production capacity,
enable us in meeting the bulk and immediate requirements of our
clients in time.
Established in 1900, KSTM's innovative and comprehensive
mechanical testing systems are backed by a responsive team who
will provide friendly support from day one. KSTM is manufacturer &
distributor of fatigue test and universal testing systems for tension,
compression, flexure, torsion & biaxial testing.
about KSTM
Washing Machine Elements Test Equipment
17
We supply Various Performance, Fatigue Test Machine, Automotive, Bike, Vehicle Parts Test facilities
Bearing, Gear, Joint, Coupling, Transmission, Motor, Generator, Pump, Valve, Brake, Shaker and Assembly Line
Contact Us
KS TESTING MACHINE, Co,. LTD
Contact Person :
Mr. Kim. Sangone
Addess : Dongwhri 139-1
Bongdangup, Whasungsi
Kyungkido South Korea )
We’re on the Web! See us at:
http://blog.daum.net/kstestmc
C.P 82 10 2247 0089
Telephone : +(82) 31 307 6766
Fax : +(82) 31 224 6766 E-mail : [email protected]