+ All Categories
Home > Documents > WASTE WATER Wavin Wafix PP · Wavin Wafix PP The Wafix PP system is made from the recyclable PP...

WASTE WATER Wavin Wafix PP · Wavin Wafix PP The Wafix PP system is made from the recyclable PP...

Date post: 16-Aug-2020
Category:
Upload: others
View: 4 times
Download: 0 times
Share this document with a friend
2
WASTE WATER Wavin Wafix PP
Transcript
Page 1: WASTE WATER Wavin Wafix PP · Wavin Wafix PP The Wafix PP system is made from the recyclable PP (Polypropylene), which gives both pipes and fittings good physical and chemical properties.

WASTE WATER

Wavin Wafix PP

Page 2: WASTE WATER Wavin Wafix PP · Wavin Wafix PP The Wafix PP system is made from the recyclable PP (Polypropylene), which gives both pipes and fittings good physical and chemical properties.

Waste water

Wavin Wafix PP The Wafix PP system is made from the recyclable PP

(Polypropylene), which gives both pipes and fittings good

physical and chemical properties. The PP material used has a

high E-module, which gives the pipes a good length stiffness

and a large impact strength. That is why the Wafix PP system

can withstand both large internal and external loads during

assembly and installation - even at minus degrees.

Physical properties of Wavin Wafix PP

Dec

emb

er 2

019

Wavin | Wavinvej 1 | DK-8450 Hammel | Telefon +45 8696 2000

Internet www.wavin.dk | E-mail [email protected] | www.wavin.com

Pipe material Polypropylene (PP-B)

Sealing material TPE

Density 901 kg/m³

E-module 1.800 Mpa

Expansion linear 0,15 mm/mK

Thermal Conductivity w / 20 °C 0.24 W / mK

Operating temperature 90°C

Short-term peak temperature 100° C (< 30 ltr/min in 2 min.)

Chemical resistance We refer to ISO / TR 10358

Can be used for pH values between

2 - 12

Unique Fix·lock® sealing ring

The system’s unique Fix·lock® sealing ring seals as many as

three areas, giving a large abutment to the pipe and securing

that your collections are 100% tight every time. It gives extra

safety and security if you embed or hide the pipes in a shaft.

The Fix·lock® ring is made of two different materials, which are

molded together. The sealing is manufactured in TPE having a

very high resistance to most chemicals incl. oil and petrol.

The second part of the ring is made in PP. This part holds the

Fix·lock® ring in the sleeve so that the sealing ring can’t be

displaced.


Recommended