www.lotusmixers.com Phone (941)966-1885 Email: [email protected]Mixers For Water & Wastewater Treatment WATER TREATMENT • Rapid/Flash Mixers • Flocculators • Carbon Mixers • pH Control • Chlorine Mixers • Lime Slurry WASTEWATER TREATMENT • Anoxic Mixers (Denitrification) • Flash/Rapid Mixers • Carbon Mixers • Flocculators • Sludge Mixers/Conditioning • Digesters(Aerobic/Anaerobic) • Aeration • Polymer Mixers • Lime Slurry • Scum Mixers • Equalization Mixers • Neutralization Mixers For municipal water and wastewater treatment facilities, LOTUS MIXERS is proud to point out that our agitators qualify for MADE IN THE USA. Supplying high quality mixers since 1996. TOP ENTRY (VERTICAL), SIDE ENTRY MIXERS AND STATIC MIXERS Industry Leader in Impeller Technology
For municipal water and wastewater treatment facilities, LOTUS MIXERS is proud to point out that our agitators qualify for MADE IN THE USA.
Supplying high quality mixers since 1996.
TOP ENTRY (VERTICAL), SIDE ENTRY MIXERS AND STATIC MIXERS
Industry Leader in Impeller Technology
2
Mixers For Water and Wastewater Treatment – Top Entry, Side Entry and Static Mixers
LOTUS Mixers Inc. www.lotusmixers.com 3449 Technology Drive #201 Phone (941)966-1885 North Venice, FL 34275 Email: [email protected]
Important Note To General Contractors:
Whether we are the named vendor or not in a specification, there is no equal to LOTUS MIXERS in terms of reliability, performance and customer support.
We will work with you to make sure using LOTUS MIXERS meets the expectation of the specification, is approved by the engineer, saves your company money and the mixers arrive on time.
For more than 15 years, LOTUS MIXERS has been supplying agitators for a wide variety of applications including water and wastewater treatment.
LOTUS Mixers has a reputation based on quality engineering and highly reliable agitators that utilize the latest impeller technology to optimize performance.
Quality Engineering – LOTUS Mixers utilizes our vast experience both from our laboratory research and field installations to minimize plant downtime and reduce overall maintenance requirements of our mixers.
Highly Reliable Agitators- The guidelines we use to design our mixers are typically far more stringent in terms of design and quality control than normal specifications. For example, our gearboxes are all supplied with a 2.0+ service based on full nameplate HP, the bearings are no less than L10-100,000 hours and our shafts do not operate more than 65% of the first critical speed. These are just three examples that set us apart from competition.
Impeller Technology- LOTUS Mixers utilizes the latest in CFD model and PVI (particle velocity imaging) in developing application specific impellers. By understanding the rheology of an application, we can optimize the throughput.
