+ All Categories
Home > Documents > Water Quality Standards and MS4 Storm Water Permitting.

Water Quality Standards and MS4 Storm Water Permitting.

Date post: 14-Dec-2015
Category:
Upload: ricardo-shed
View: 223 times
Download: 2 times
Share this document with a friend
Popular Tags:
14
Water Quality Standards and MS4 Storm Water Permitting
Transcript
Page 1: Water Quality Standards and MS4 Storm Water Permitting.

Water Quality Standards and MS4 Storm Water Permitting

Page 2: Water Quality Standards and MS4 Storm Water Permitting.

What “standards”?

• Promulgated as Title 30 of the TAC, Chapter 307

• Establishes instream goals for water quality statewide

• Revised every three years (in theory)• EPA approval required• All TPDES permits must comply with these

water quality standards (WQS)• Companion guide RG-194

Page 4: Water Quality Standards and MS4 Storm Water Permitting.

Antidegradation

Tier 1 – Water quality sufficient to protect existing uses will be maintained

Tier 2 – Activities subject to regulatory action will not degradation to waters that exceed fishable/swimmable quality

All individual and general permits (including storm water) are subject to the antidegradation

policy

Page 5: Water Quality Standards and MS4 Storm Water Permitting.

How do WQS apply to traditional discharge permits?

• Water bodies that receive a wastewater discharge are reviewed for:

– Applicable standards

– Determine instream dilution

– Set allowable mixing zones

Page 6: Water Quality Standards and MS4 Storm Water Permitting.

How do WQS apply to traditional discharge permits continued..

• Effluent analysis review

• Permit limits/monitoring requirements

• DMR

Page 8: Water Quality Standards and MS4 Storm Water Permitting.

Making the Round Peg fit into the Square Hole Continued..

– There is no simple way to gather “effluent” data at outfall

– Basis for numerical criteria

– Existing monitoring data only reflects ambient conditions

Page 9: Water Quality Standards and MS4 Storm Water Permitting.

Other Challenges…

– Lack of state and federal policy

– Instream dilution and pollutant loading are time variable

– Costs and attainability of WQS are difficult to assess

Page 10: Water Quality Standards and MS4 Storm Water Permitting.

So How are WQS Applied to Wet Weather Dischargers?

It’s pretty obvious that the square peg won’t fit in the round hole. We must take a

different approach.

Page 11: Water Quality Standards and MS4 Storm Water Permitting.

Changes to the WQS and IPs in 2000 Revisions

307.8(e) was added to the WQS:

– Storm water quality - BMPs and technology-based limits

– Instream monitoring – Specific conditions or limits can be added

when warranted – Outfall monitoring where little to no data exists

Page 12: Water Quality Standards and MS4 Storm Water Permitting.

Special Circumstances

Cases where a storm water facility may be reviewed like a wastewater discharge:

• Retaining water and discharging during dry weather

• Storm water commingled with wastewater

Page 13: Water Quality Standards and MS4 Storm Water Permitting.

Discharges to Impaired Water and Other Sensitive Areas

• Discharges can not cause or contribute to an impairment

• Edwards Aquifer Rules - 30 TAC, Chapter 213

• Watershed Protection

Rules

30 TAC, Chapter 311

Page 14: Water Quality Standards and MS4 Storm Water Permitting.

More Information…

• Texas Surface Water Quality

Standards webpage: http://www.tceq.state.tx.us/nav/eq/eq_swqs.html

• Implementation Procedures

http://www.tceq.state.tx.us/comm_exec/forms_

pubs/pubs/rg/rg-194.html


Recommended