+ All Categories
Home > Documents > WATER SLIDE RD TECHNICAL DATA - ABN Pipe Systems · technical requirements and testing. ......

WATER SLIDE RD TECHNICAL DATA - ABN Pipe Systems · technical requirements and testing. ......

Date post: 23-Apr-2018
Category:
Upload: dangminh
View: 225 times
Download: 1 times
Share this document with a friend
2
ABN//DISTRI WATER SLIDE RD /////////////////////////////////////////////////TECHNICAL DATA 1 2 / / / PE-RC system for pressure networks APPLICATION FIELDS •Irrigation •Recycled water networks •Sea outfalls •Industrial applications •Industrial cooling systems •Fishing industry and agricultural industry •Fire protection networks DIFFERENTIATING FEATURES High resistance to crack and puncture Resistance to impacts and collapsing Indicated for the installation through technical without the trenching (bursting, relining, etc.) Resistant to disinfection procedures Antimicrobial protection Anti-incrustation protection Long term durability up to 100 years Sustainable development of the trench Halogen free Drinking water systems STANDARDS UNE EN 12201: Plastics piping systems for the supply of water. Polyethylene. Part 1. Generality. UNE EN 13244: Plastic piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE). ISO 4427: Polyethylene for water supply networks. Specifications. GW 335-A2: Beiblatt 1 zu DVGW-Arbeitsblatt GW 335- A2:2005-11 Kunststoff-Rohrleitungssysteme in der Gas- und Wasserverteilung; Anforderungen und Prüfungen - Teil A2: Rohre aus PE 80 und PE 100 PAS 1075: Pipes made from polyethylene for alternative installation tecniques. Dimensions, technical requirements and testing. CERTIFICATES Certificate of Conformity by Bureau Veritas. ABN DISTRI WATER SLIDE RD has a high resistance to point loads, antimicrobial protection and resistance to disinfection procedures. PIPE SYSTEMS February 2017 ABN DISTRI WATER SLIDE RD multi-layer technology: 1. External layer in PE-100 RC black in colour with blue strips. This layer has an exceptional resistance to slow crack growth, more than hundred times the required regulation demanded by the potable water and gas polyethylene European Norm. It provides outstanding UV resistance. 2. Internal antiadherent and antimicrobial layer, resistant to disinfection procedures, blue in colour. The smooth inner surface avoids the incrustations, so minimize the pressure loss. The antimicrobial additive protects 100% against the legionella, microorganism, coliforms and yeast, that make this systems suitable for the use in the food industry, in accordance to RD 140/203. It is also resistant to disinfection procedures used in drinking water networks. PE 100 RC PIPE, ABN DISTRI WATER SLIDE RD ABN DISTRI WATER SLIDE RD pipe, made of PE 100 RC multilayer for pressure networks , external layer black in colour with blue strips, with high resistance to crack and puncture, internal layer in blue with antimicrobial, resistant to disinfection procedures and anti-incrustation protection, SDR ---, PN --- exterior diameter ---- mm and thickness --- mm, i/p.p. fittigs, made in accordance to EN 12201 and PAS 1075. Description for proyects 1075 ECO SIS WATER SLIDE RD ABN DISTRI WATER SLIDE RD RECYCLABLE FOOD USE LEGIONELLA RESISTANT DISINFECTION RESISTANT ECOLOGICAL ANTI-FOULLING SUSTAINABLE TRENCH HF HALOGEN FREE HF HALOGEN FREE
Transcript

ABN//DISTRI WATER SLIDE RD /////////////////////////////////////////////////TECHNICAL DATA

12

///PE-RC system for pressure networks

APPLICATION FIELDS

••Irrigation •Recycled water networks•Sea outfalls•Industrial applications•Industrial cooling systems•Fishing industry and agricultural industry •Fire protection networks

DIFFERENTIATING FEATURES

•High resistance to crack and puncture•Resistance to impacts and collapsing•Indicated for the installation through technical without the trenching (bursting, relining, etc.)•Resistant to disinfection procedures•Antimicrobial protection •Anti-incrustation protection•Long term durability up to 100 years•Sustainable development of the trench•Halogen free

Drinking water systems

STANDARDS

•UNE EN 12201: Plastics piping systems for the supply of water. Polyethylene. Part 1. Generality.

•UNE EN 13244: Plastic piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE).

•ISO 4427: Polyethylene for water supply networks. Specifications.

•GW 335-A2: Beiblatt 1 zu DVGW-Arbeitsblatt GW 335-A2:2005-11 Kunststoff-Rohrleitungssysteme in der Gas- und Wasserverteilung; Anforderungen und Prüfungen - Teil A2: Rohre aus PE 80 und PE 100

•PAS 1075: Pipes made from polyethylene for alternative installation tecniques. Dimensions, technical requirements and testing.

CERTIFICATESCertificate of Conformity by Bureau Veritas.

ABN DISTRI WATER SLIDE RD has a high resistance to point loads, antimicrobial protection and resistance to disinfection procedures.

PIPE SYSTEMS

February 2017

ABN DISTRI WATER SLIDE RD multi-layer technology:

1. External layer in PE-100 RC black in colour with blue strips.This layer has an exceptional resistance to slow crack growth, more than hundred times the required regulation demanded by the potable water and gas polyethylene European Norm. It provides outstanding UV resistance.2. Internal antiadherent and antimicrobial layer, resistant to disinfection procedures, blue in colour. The smooth inner surface avoids the incrustations, so minimize the pressure loss. The antimicrobial additive protects 100% against the legionella, microorganism, coliforms and yeast, that make this systems suitable for the use in the food industry, in accordance to RD 140/203. It is also resistant to disinfection procedures used in drinking water networks.

PE 100 RC PIPE, ABN DISTRI WATER SLIDE RDABN DISTRI WATER SLIDE RD pipe, made of PE 100 RC multilayer for pressure networks , external layer black in colour with blue strips, with high resistance to crack and puncture, internal layer in blue with antimicrobial, resistant to disinfection procedures and anti-incrustation protection, SDR ---, PN --- exterior diameter ---- mm and thickness --- mm, i/p.p. fittigs, made in accordance to EN 12201 and PAS 1075.

Description for proyects

1075

PIPE SYSTEMS

ECO SIS WATER SLIDE RD

ABN DISTRI WATER SLIDE RD

RECYCLABLE FOOD USE LEGIONELLA RESISTANT

DISINFECTIONRESISTANT ECOLOGICAL ANTI-FOULLING

SUSTAINABLE TRENCH

HFHALOGEN FREE

HFHALOGEN FREE

TECHNICAL DATAMaterial PE 100 RC

Density 0,96 g/cm3 according to ISO 1183

Melt mass flow rate 0,25 g/10 min according to ISO 1133

Thermal expansion coefficient 0,20 mm/m ºC

Short therm elastic modulus 1100 Mpa according to ISO 527

Safety factor 1,25

Tensile strain at break >950% according to ISO 6259

Production Normas EN 12201/EN 1324/ISO 4427/PAS 1075

Operating temperature -40 ºC a + 50 ºC

Penetration test > 30% without breaking (1 cm2 spike)

Slow crack growth (SCG) > 3000 hours (pipe) > 5000 hours (raw material)

Rapid crack propagation (RCP) > 10 bar

/////////////////////////////////

CODE

-000WS10002500000WS10003200000WS10004000000WS10005000000WS10006300000WS10007500000WS10009000000WS10011000000WS10012500000WS10016000000WS10020000000WS10022500000WS10025000000WS10031500000WS10035500000WS10040000000WS10045000000WS10050000

DIAMETER(mm)

-25324050637590110125160200225250315355400450500

THICKNESS(mm)

-1.81.92.43.03.84.55.46.67.49.511.913.414.818.721.123.726.729.6

Product range

AVAILABLE ON REQUEST:

• PN 4/SDR 41• PN 6/SDR 26 • PN 8/SDR 21 • PN 12,5/SDR 13.6 • PN 20/SDR 9 • PN 25/SDR 7,4

LENGHT(m)

100 m (coil)100 m (coil)100 m (coil)100 m (coil)100 m (coil)

50 m (coil)/5.80 bar50 m (coil)/5.80 bar50 m (coil)/5.80 bar50 m (coil)/5.80 bar

5.80 m bar5.80 bar5.80 bar5.80 bar5.80 bar5.80 bar5.80 bar5.80 bar5.80 bar5.80 bar

*On request bar until 13 m length

CODE

000WS16002000000WS16002500000WS16003200000WS16004000000WS16005000000WS16006300000WS16007500000WS16009000000WS16011000000WS16012500000WS16016000000WS16020000000WS16022500000WS16025000000WS16031500000WS16035500000WS16040000000WS16045000000WS16050000

DIAMETER(mm)

2025324050637590110125160200225250315355400450500

THICKNESS(mm)

1.92.32.93.74.65.86.88.210.011.414.618.220.522.728.632.236.340.945.4

SDR 11 - PN 16 SDR 17-PN 10

PIPE SYSTEMS

CENTRAL

CTRA. BAÑOS DE ARTEIXO, 28PARQUE EMPRESARIAL AGRELA15008 A CORUÑA (ESPAÑA)

T. +34 902 202 532F. +34 902 253 240

PLANTA DE PRODUCCIÓN (con certificación)

PARQUE EMPRESARIAL MEDINA ONAUTOVÍA A-6, KM 15247400 MEDINA DEL CAMPO(VALLADOLID)

[email protected]

Distribuidor

Válido hasta el 31 de diciembre de 2018Manufacturedin

Spain


Recommended