2
Watergrains TM are a ready-for-use soil adjuvant, based on Hydropolymin®, which was developed in Germany until 2010. It forms a polygon grid structure, that is used to regulate the water balance in the soil - with their polygon structure the Watergrains TM are able to collect the water that is needed by the plant for its growth and give it to the plant over a long period of time. The excess water will re-enter the water cycle. Watergrains TM decreases the uncontrolled drainage of water in the soil and erosion, and increases the water efficiency and continuous water supply to the plants. Watergrains TM is able to rapidly resorb new water and give it to the plant when needed. This is a long term repeatable process. Watergrains TM are a unique product on the market: Watergrains TM is the only material in the market based on the registered, proprietary material Hydropolymin® on the market. Watergrains TM is developed and produced in Germany. Watergrains TM is produced under German Production standards: DIN 43530 Part IV | EN 285 | ISO 9001 | ISO 14001. Watergrains TM is tested by German Laboratories under German standards: DIN EN ISO 11885 | DIN 19734 | DIN EN 62321 | DIN EN 62321 | WES 541 | DIN EN 14346. Watergrains TM are Ready-for-Use - NO activator or additional water is needed. Watergrains TM are a polygon material that gives water. They don’t absorb water from the plant. Watergrains TM are biodegradable. Watergrains TM are non-toxic. Watergrains TM work up to 10 years. Watergrains TM are suitable for all types of plants, crops, vegetables and fruits. Fields of Application Copyright | Watergrains by Thoms Materials Technologies GmbH | Kemperplatz 1 | 10785 Berlin | All rights reserved @watergrains Agriculture Indoor Lawn / Field Treatment Seeding Single Plant Treatment Potted Plants Agroforestry Plantation Treatment www.watergrains.com Watergrains Seeding. Planting. Farming
