Date post: | 13-May-2017 |
Category: |
Documents |
Upload: | suhailtambal |
View: | 212 times |
Download: | 0 times |
Watermaster is ideal for different
shallow water applications
• Rivers, canals,
industrial ponds and
basins
• Watermaster can
work in places where
no other machine
can operate
All the work at one site
• Backhoe dredging, suction dredging and
piledriving capabilities in one machine
• Changing from one working mode to
another takes less than 30 minutes
Watermaster has excellent
mobilisation capabilities • Transportable on public roads with a
standard trailer
• Moves in and out of water and trailer
without crane assistance
• Can operate in very shallow waters,
wetlands and even on dry ground
• Cruises in water to the worksite with own
propulsion system, no tugboats needed
Independent working capabilities
without tugboats and wire cables
• Work movement at worksite is created with
excavator poom, spuds and propeller
• Independent dredging movement is created
without anchors, wire cables and assisting
vessels which block the passing water
traffic
Watermasters high quality and service
is based on serial production
Reliable factory back-up, training and after sales service
Production in ISO 9001 and ISO 14001 certified production plant
Economical efficiency and
productivity
• Watermaster reduces investment and
operational costs because
• There is no need for:
– Separate excavators on pontoons
– Separate suction dredgers
– Crane or tugboat assistance
– Vessels for anchorages and wire cable setting
• All capabilities are built in one machine
operated by one operator
Technical specifications
Max suction dreging reach: 5,4 m
Weight: 17 tn
Operating width with sidepontoons: 5,3 m
Transport width: 3,3 m
Lenght: 10,4 m
Max pumping distance: 1,5 km
Cutter pump capacity against 10 m head: 650 m3/h
Cutter head diameter: 600 mm
Discharge line diameter: 225 mm
Max rear stabilizer reach: 4,9 m
Max front stabilizer reach: 3,5 m
Max excavation reach: 4,3 m