WATERTIGHT ELECTRICAL TERMINATIONS
WETechnologies
Description
AIBPHA1BPHB-1/8NPTA1BPHRA1BPHSA1BPHS-1/8NPT15SC-HP/HT15PC-HP/HT6P/4S-HP/HT4P/6S-HP/HT6P/4S-MP/MT4P/6S-MP/MT10CC-MP/MT10CC-HP/HT4P/6S-HP/HT6P/4S-HP/HT6P/4S-HP/HT (.687Ø O.D.)4P/6S-HP/HT (.687Ø O.D.)6P/4S-MP/MT (.687Ø O.D.)4P/6S-MP/MT (.687Ø O.D.)10CC-MP/MT (.687Ø O.D.)10CC-HP/HT (.687Ø O.D.4P/6S-HP/HT (No Key)6P/4S-HP/HT (No Key)
Part Number
12691275152117302394
2567-152568-15
2615261626292630
3553-103570-103572-W3576-W
3585358635873588
3589-103596-10
36113633
Page No.
1234567891011121314151617181920212223
Downhole ConnectorIndex
Mounting Thread
1/4-28UNF-2A1/8-MNPT1/4-28UNF-2A1/4-28UNF-2A1/8-MNPTN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/A
WATERTIGHT ELECTRICAL TERMINATIONS
WETechnologiesA1BPH
Part Number:
Shell Material:
Contact Material:
Contact Plating: (Standard)
(Optional)
Dielectric Material:
Operating Pressure:
Operating Temperature:
Voltage Rating:
Mounting Torque:
Mating Connector:
1269
316 Stainless Steel
Leaded Nickel Copper
Silver: Mil-S-365A, Type III,
Grade A, .0005 Thick
Gold: Mil-G-45204, Type II,
Grade C, Class 1 over .0001 Nickel Base
1044, Glass Reinforced Epoxy
20,000 psig open face. Pressure testing above
1500 psi performed as required by order.
400°F, 192°C
600vdc
50 in/lbs
A1FS-1
1 #16 awg
-1
Available Contact Interfaces
Technical Data
Description
A1BPH connectors are manufactured with a 316 S.S. body, brass pin contact
and glass reinforced epoxy dielectric. All connectors are electrically tested at
2200vdc (DWV) and 500vdc (IR) with a minimum passing value > 100 megohms.
All bulkhead connectors are pressure tested open face to 1500 psi. Hydrostatic
testing to 20,000 psi available at customer request.
Bulkhead Pin Connector
Scale = 1:1
.250-28UNF-2A
2-008 O-ring
1.995
.808
.049
.052
Ø.360.370
.250-28UNF-2B
32 32
Counterbore Mounting Detail
.049
.052
Ø.360.370
32 32
Flush Mounting Detail.250-28UNF-2B
Washer #1063
.438
P/N 1269
-1-
WATERTIGHT ELECTRICAL TERMINATIONS
WETechnologiesA1BPH-1/8NPT
Part Number:
Shell Material:
Contact Material:
Contact Plating: (Standard)
Dielectric Material:
Operating Pressure:
Operating Temperature:
Voltage Rating:
Mounting Torque:
Mating Connector:
1275
316 Stainless Steel
Beryllium Copper
Gold: Mil-G-45204, Type II,
Grade C, Class 1 over .0001 Nickel Base
1044, Glass Reinforced Epoxy
20,000 psig open face. Pressure testing above
1500 psi performed as required by order.
200°C
600vdc
50 in/lbs
A1FS-1, A1FS-FA
1 #16 awg
-1
Available Contact Interfaces
Technical Data
Description
A1BPH-1/8NPT connectors are manufactured with a 316 S.S. shell, beryllium
copper pin contact and glass reinforced epoxy dielectric. All connectors are
electrically tested at 2,200vdc (DWV) and 500vdc (IR) with a minimum passing
value > 100 megohms.
All bulkhead connectors are pressure tested open face to 1500 psi. Hydrostatic
testing to 20,000 psi combined with temperature to 200°C available at customer
request.
Bulkhead Pin Connector
Scale = 1:1
.375
.125
2.00
.83
.31
1/8-27MNPT
P/N 1275
-2-
WATERTIGHT ELECTRICAL TERMINATIONS
WETechnologies A1BPHR
Part Number:
Shell Material:
Contact Material:
Contact Plating: (Standard)
Dielectric Material:
Operating Pressure:
Operating Temperature:
Voltage Rating:
Mounting Torque:
Mating Connector:
1521-
316 Stainless Steel
Beryllium Copper
Gold: Mil-G-45204, Type II,
Grade C, Class 1 over .0001 Nickel Base
1044, Glass Reinforced Epoxy
20,000 psig open face. Pressure testing above
1500 psi performed as required by order.
400°F, 192°C
2500vdc
50 in/lbs
A1FS-1, A1FS-FA
1 #16 awg
-1
Available Contact Interfaces
Technical Data
Description
A1BPHR connectors are manufactured with a 316 S.S. body, beryllium copper pin
contact and glass reinforced epoxy dielectric. All connectors are electrically tested at
2500vdc (DWV) and 500vdc (IR) with a minimum passing value > 100 megohms.
All bulkhead connectors are pressure tested open face to 1500 psi. Hydrostatic
testing to 20,000 psi combined with temperature to 400°f available at customer
request.
Bulkhead Pin Connector
Scale = 1:1
.250-28UNF-2A
2-008 O-ring
1.995
.808
.250-28UNF-2B
Mounting Detail
.375
.313
.312
82.0°
.024
.023
.192
P/N 1521
-3-
WATERTIGHT ELECTRICAL TERMINATIONS
WETechnologies A1BPHS
Part Number:
Shell Material:
Contact Material:
Contact Plating: (Standard)
(Optional)
Dielectric Material:
Operating Pressure:
Operating Temperature:
Voltage Rating:
Mounting Torque:
Mating Connector:
1730
316 Stainless Steel
Leaded Nickel Copper
Silver: Mil-S-365A, Type III,
Grade A, .0005 Thick
Gold: Mil-G-45204, Type II,
Grade C, Class 1 over .0001 Nickel Base
1044, Glass Reinforced Epoxy
20,000 psig open face. Pressure testing above
1500 psi performed as required by order.
400°F, 192°C
2,500vdc
50 in/lbs
A1FS-1, A1FS-FA
1 #16 awg
-1
Available Contact Interfaces
Technical Data
Description
A1BPH connectors are manufactured with a 316 S.S. body, brass pin contact and
glass reinforced epoxy dielectric. All connectors are electrically tested at 2500vdc
(DWV) and 500vdc (IR) with a minimum passing value > 100 megohms.
All bulkhead connectors are pressure tested open face to 1500 psi. Hydrostatic
testing to 20,000 psi available at customer request.
Bulkhead Pin Connector
Scale = 1:1
.250-28UNF-2A
2-008 O-ring
.049
.052
Ø.360.370
.250-28UNF-2B
32 32
Counterbore Mounting Detail
.049
.052
Ø.360.370
32 32
Flush Mounting Detail.250-28UNF-2B
Washer #1063
.438
1.867
.680
.309
P/N 1730
-4-
WATERTIGHT ELECTRICAL TERMINATIONS
WETechnologiesA1BPHS-1/8NPT
Part Number:
Shell Material:
Contact Material:
Contact Plating: (Standard)
Dielectric Material:
Operating Pressure:
Operating Temperature:
Voltage Rating:
Mounting Torque:
Mating Connector:
2394
316 Stainless Steel
360 Brass
Gold: Mil-G-45204, Type II,
Grade C, Class 1 over .0001 Nickel Base
1044, Glass Reinforced Epoxy
20,000 psig open face. Pressure testing above
1500 psi performed as required by order.
400°F, 192°C
600vdc
50 in/lbs
A1FS-1, A1FS-FA
1 #16 awg
-1
Available Contact Interfaces
Technical Data
Description
A1BPHS-1/8NPT connectors are manufactured with a 316 S.S. body, 360
Brass pin contact and glass reinforced epoxy dielectric. All connectors are
electrically tested at 2,200vdc (DWV) and 500vdc (IR) with a minimum passing
value > 100 megohms.
All bulkhead connectors are pressure tested open face to 1500 psi. Hydrostatic
testing to 20,000 psi combined with temperature to 200°C available at customer
request.
Bulkhead Pin Connector
Scale = 1:1
1/8-27MNPT
.375
1.839
.667
.125
P/N 2394
-5-
WATERTIGHT ELECTRICAL TERMINATIONSechnologiesWET
Description
This High Pressure/Temperature insert features a Toughened High Glass Thermoset Epoxy body whichprovides a Uni-directional pressure barrier to 20kpsi @ 200°C.
Applications
• MWD/LWD Tools • Battery Packages • Downhole Electronic Enclosures • High Pressure Wellhead Exits • Geophone Arrays • D.S.U.S.
Materials• Connector Body• O-rings: • Contacts: • Contact Plating: Performance• Operating Pressure:• Operating Temperature: Electrical• Voltage Rating:• Insulation Resistance:• Dielectric Withstanding:
AMPCO 45 - NiAlBrViton - 90 DurometerLeaded Nickel Copper, Stainless Steel HoodGold: Mil-G-45204, Type II, Grade C, Class 1 over .0001 Nickel Base
20,000 psig, bi-directional200°C @ 20,000 psig
600 vdc>10 gigohms @ 500vdc @ 200°C1,000 vdc
P/N 2567-1515SC-HP/HT INSERT
TECHNICAL SPECIFICATIONS
Ø.75
.25
.12.51
.31
Ø.58
Direction of Pressure.
-6-
WATERTIGHT ELECTRICAL TERMINATIONSechnologiesWET
Description
This High Pressure/Temperature insert features a Toughened High Glass Thermoset Epoxy body whichprovides a Uni-directional pressure barrier to 20kpsi @ 200°C.
Applications
• MWD/LWD Tools • Battery Packages • Downhole Electronic Enclosures • High Pressure Wellhead Exits • Geophone Arrays • D.S.U.S.
Materials• Connector Body• O-rings: • Contacts: • Contact Plating: Performance• Operating Pressure:• Operating Temperature: Electrical• Voltage Rating:• Insulation Resistance:• Dielectric Withstanding:
AMPCO 45 - NiAlBrViton - 90 DurometerLeaded Nickel Copper, Stainless Steel HoodGold: Mil-G-45204, Type II, Grade C, Class 1 over .0001 Nickel Base
20,000 psig, bi-directional200°C @ 20,000 psig
600 vdc>10 gigohms @ 500vdc @ 200°C1,000 vdc
P/N 2568-1515PC-HP/HT INSERT
TECHNICAL SPECIFICATIONS
Ø.75
.25
.12.51
.31
Ø.58
Direction of Pressure.
-7-
WATERTIGHT ELECTRICAL TERMINATIONSechnologiesWET
Ø.75 .89.25
.25
.41
Ø.60
Description
This High Pressure/Temperature insert features a Toughened High Glass Thermoset Epoxy body whichprovides a bi-directional pressure barrier to 20kpsi @ 400°f.
Applications
• MWD/LWD Tools • Battery Packages • Downhole Electronic Enclosures • High Pressure Wellhead Exits • Geophone Arrays • D.S.U.S.
Materials• Face Rings• O-rings: • Contacts: • Contact Plating: Performance• Operating Pressure:• Operating Temperature: Electrical• Voltage Rating:• Insulation Resistance:• Dielectric Withstanding:
AMPCO 45 - NiAlBrViton - 90 DurometerLeaded Nickel Copper, Stainless Steel HoodGold: Mil-G-45204, Type II, Grade C, Class 1 over .0001 Nickel Base
20,000 psig, bi-directional200°C @ 20,000 psig
600 vdc>10 gigohms @ 500vdc @ 200°C1,000 vdc
P/N 26156P/4S-HP/HT INSERT
4 #20 awg Sockets6 #20 awg Pins
TECHNICAL SPECIFICATIONS
-8-
WATERTIGHT ELECTRICAL TERMINATIONSechnologiesWET
Ø.75 .89.25
.25
.41
Ø.60
Description
This High Pressure/Temperature insert features a Toughened High Glass Thermoset Epoxy body whichprovides a bi-directional pressure barrier to 20kpsi @ 200°C.
Applications
• MWD/LWD Tools • Battery Packages • Downhole Electronic Enclosures • High Pressure Wellhead Exits • Geophone Arrays • D.S.U.S.
Materials• Face Rings• O-rings: • Contacts: • Contact Plating: Performance• Operating Pressure:• Operating Temperature: Electrical• Voltage Rating:• Insulation Resistance:• Dielectric Withstanding:
AMPCO 45 - NiAlBrViton - 90 DurometerLeaded Nickel Copper, Stainless Steel HoodGold: Mil-G-45204, Type II, Grade C, Class 1 over .0001 Nickel Base
20,000 psig, bi-directional200°C @ 20,000 psig
600 vdc>10 gigohms @ 500vdc @ 200°C1,000 vdc
P/N 26164P/6S-HP/HT INSERT
6 #20 awg Sockets4 #20 awg Pins
TECHNICAL SPECIFICATIONS
-9-
WATERTIGHT ELECTRICAL TERMINATIONSechnologiesWET
Ø.75 .89.25
.25
.41
Ø.60
Description
This High Pressure/Temperature insert features a Toughened High Glass Thermoset Epoxy body whichprovides a bi-directional pressure barrier to 10kpsi @ 150°C.
Applications
• MWD/LWD Tools • Battery Packages • Downhole Electronic Enclosures • High Pressure Wellhead Exits • Geophone Arrays • D.S.U.S.
Materials• O-rings: • Contacts: • Contact Plating: Performance• Operating Pressure:• Operating Temperature: Electrical• Voltage Rating:• Insulation Resistance:• Dielectric Withstanding:
Viton - 90 DurometerLeaded Nickel Copper, Stainless Steel HoodGold: Mil-G-45204, Type II, Grade C, Class 1 over .0001 Nickel Base
10,000 psig, bi-directional150°C @ 10,000 psig
600 vdc>10 gigohms @ 500vdc @ 200°C1,000 vdc
P/N 26296P/4S-MP/MT INSERT
4 #20 awg Sockets6 #20 awg Pins
TECHNICAL SPECIFICATIONS
-10-
WATERTIGHT ELECTRICAL TERMINATIONSechnologiesWET
Ø.75 .89.25
.25
.41
Ø.60
Description
This High Pressure/Temperature insert features a Toughened High Glass Thermoset Epoxy body whichprovides a bi-directional pressure barrier to 10kpsi @ 150°C.
Applications
• MWD/LWD Tools • Battery Packages • Downhole Electronic Enclosures • High Pressure Wellhead Exits • Geophone Arrays • D.S.U.S.
Materials• O-rings: • Contacts: • Contact Plating: Performance• Operating Pressure:• Operating Temperature: Electrical• Voltage Rating:• Insulation Resistance:• Dielectric Withstanding:
Viton - 90 DurometerLeaded Nickel Copper, Stainless Steel HoodGold: Mil-G-45204, Type II, Grade C, Class 1 over .0001 Nickel Base
10,000 psig, bi-directional150°C @ 10,000 psig
600 vdc>10 gigohms @ 500vdc @ 200°C1,000 vdc
P/N 26304P/6S-MP/MT INSERT
6 #20 awg Sockets4 #20 awg Pins
TECHNICAL SPECIFICATIONS
-11-
WATERTIGHT ELECTRICAL TERMINATIONSechnologiesWET
Ø.75 .89.25
.25
Ø.60
Description
This High Pressure/Temperature insert features a Toughened High Glass Thermoset Epoxy body whichprovides a bi-directional pressure barrier to 10kpsi @ 150°C.
Applications
• MWD/LWD Tools • Battery Packages • Downhole Electronic Enclosures • High Pressure Wellhead Exits • Geophone Arrays • D.S.U.S.
Materials• O-rings: • Contacts: • Contact Plating: Performance• Operating Pressure:• Operating Temperature: Electrical• Voltage Rating:• Insulation Resistance:• Dielectric Withstanding:
Viton - 90 DurometerLeaded Nickel Copper, Stainless Steel HoodGold: Mil-G-45204, Type II, Grade C, Class 1 over .0001 Nickel Base
10,000 psig, bi-directional150°C @ 10,000 psig
600 vdc>10 gigohms @ 500vdc @ 150°C1,000 vdc
P/N 3553-1010CC-MP/MT
PENETRATOR INSERT
10 #20 awgPenetrator Contacts
TECHNICAL SPECIFICATIONS
.25
-12-
WATERTIGHT ELECTRICAL TERMINATIONSechnologiesWET
Ø.75 .89.25
.25
Ø.60
Description
This High Pressure/Temperature insert features a Toughened High Glass Thermoset Epoxy body whichprovides a bi-directional pressure barrier to 20kpsi @ 200°C.
Applications
• MWD/LWD Tools • Battery Packages • Downhole Electronic Enclosures • High Pressure Wellhead Exits • Geophone Arrays • D.S.U.S.
Materials• Face Rings• O-rings: • Contacts: • Contact Plating: Performance• Operating Pressure:• Operating Temperature: Electrical• Voltage Rating:• Insulation Resistance:• Dielectric Withstanding:
AMPCO 45 - NiAlBrViton - 90 DurometerLeaded Nickel Copper, Stainless Steel HoodGold: Mil-G-45204, Type II, Grade C, Class 1 over .0001 Nickel Base
20,000 psig, bi-directional200°C @ 20,000 psig
600 vdc>10 gigohms @ 500vdc @ 200°C1,000 vdc
P/N 3570-1010CC-HP/HT
PENETRATOR INSERT
10 #20 awgPenetrator Contacts
TECHNICAL SPECIFICATIONS
.25
-13-
WATERTIGHT ELECTRICAL TERMINATIONSechnologiesWET
Ø.75 .89.25
.25
.41
Ø.60
Description
This High Pressure/Temperature insert features a Toughened High Glass Thermoset Epoxy body whichprovides a bi-directional pressure barrier to 20kpsi @ 200°C.
Applications
• MWD/LWD Tools • Battery Packages • Downhole Electronic Enclosures • High Pressure Wellhead Exits • Geophone Arrays • D.S.U.S.
Materials• Face Rings• O-rings: • Contacts: • Contact Plating: Performance• Operating Pressure:• Operating Temperature: Electrical• Voltage Rating:• Insulation Resistance:• Dielectric Withstanding:
AMPCO 45 - NiAlBrViton - 90 DurometerLeaded Nickel Copper, Stainless Steel HoodGold: Mil-G-45204, Type II, Grade C, Class 1 over .0001 Nickel Base
20,000 psig, bi-directional200°C @ 20,000 psig
600 vdc>10 gigohms @ 500vdc @ 200°C1,000 vdc
P/N 3572-W4P/6S-HP/HT INSERT
6 #20 awg Sockets4 #20 awg Pins
TECHNICAL SPECIFICATIONS
-14-
WATERTIGHT ELECTRICAL TERMINATIONSechnologiesWET
Ø.75 .89.25
.25
.41
Ø.60
Description
This High Pressure/Temperature insert features a Toughened High Glass Thermoset Epoxy body whichprovides a bi-directional pressure barrier to 20kpsi @ 200°C.
Applications
• MWD/LWD Tools • Battery Packages • Downhole Electronic Enclosures • High Pressure Wellhead Exits • Geophone Arrays • D.S.U.S.
Materials• Face Rings• O-rings: • Contacts: • Contact Plating: Performance• Operating Pressure:• Operating Temperature: Electrical• Voltage Rating:• Insulation Resistance:• Dielectric Withstanding:
AMPCO 45 - NiAlBrViton - 90 DurometerLeaded Nickel Copper, Stainless Steel HoodGold: Mil-G-45204, Type II, Grade C, Class 1 over .0001 Nickel Base
20,000 psig, bi-directional200°C @ 20,000 psig
600 vdc>10 gigohms @ 500vdc @ 200°C1,000 vdc
P/N 3576-W6P/4S-HP/HT INSERT
4 #20 awg Sockets6 #20 awg Pins
TECHNICAL SPECIFICATIONS
-15-
WATERTIGHT ELECTRICAL TERMINATIONSechnologiesWET
Ø.687 .89.25
.25
.41
Ø.60
Description
This High Pressure/Temperature insert features a Toughened High Glass Thermoset Epoxy body whichprovides a bi-directional pressure barrier to 20kpsi @ 200°C.
Applications
• MWD/LWD Tools • Battery Packages • Downhole Electronic Enclosures • High Pressure Wellhead Exits • Geophone Arrays • D.S.U.S.
Materials• Face Rings• O-rings: • Contacts: • Contact Plating: Performance• Operating Pressure:• Operating Temperature: Electrical• Voltage Rating:• Insulation Resistance:• Dielectric Withstanding:
AMPCO 45 - NiAlBrViton - 90 DurometerLeaded Nickel Copper, Stainless Steel HoodGold: Mil-G-45204, Type II, Grade C, Class 1 over .0001 Nickel Base
20,000 psig, bi-directional200°C @ 20,000 psig
600 vdc>10 gigohms @ 500vdc @ 200°C1,000 vdc
P/N 35856P/4S-HP/HT INSERT
O.D. .687Ø
4 #20 awg Sockets6 #20 awg Pins
TECHNICAL SPECIFICATIONS
-16-
WATERTIGHT ELECTRICAL TERMINATIONSechnologiesWET
.89.25
.25
.41
Ø.60
Ø.687
Description
This High Pressure/Temperature insert features a Toughened High Glass Thermoset Epoxy body whichprovides a bi-directional pressure barrier to 20kpsi @ 200°C.
Applications
• MWD/LWD Tools • Battery Packages • Downhole Electronic Enclosures • High Pressure Wellhead Exits • Geophone Arrays • D.S.U.S.
Materials• Face Rings• O-rings: • Contacts: • Contact Plating: Performance• Operating Pressure:• Operating Temperature: Electrical• Voltage Rating:• Insulation Resistance:• Dielectric Withstanding:
AMPCO 45 - NiAlBrViton - 90 DurometerLeaded Nickel Copper, Stainless Steel HoodGold: Mil-G-45204, Type II, Grade C, Class 1 over .0001 Nickel Base
20,000 psig, bi-directional200°C @ 20,000 psig
600 vdc>10 gigohms @ 500vdc @ 200°C1,000 vdc
P/N 35864P/6S-HP/HT INSERT
O.D. .687Ø
6 #20 awg Sockets4 #20 awg Pins
TECHNICAL SPECIFICATIONS
-17-
WATERTIGHT ELECTRICAL TERMINATIONSechnologiesWET
Ø.687 .89.25
.25
.41
Ø.60
Description
This High Pressure/Temperature insert features a Toughened High Glass Thermoset Epoxy body whichprovides a bi-directional pressure barrier to 10kpsi @ 150°C.
Applications
• MWD/LWD Tools • Battery Packages • Downhole Electronic Enclosures • High Pressure Wellhead Exits • Geophone Arrays • D.S.U.S.
Materials• O-rings: • Contacts: • Contact Plating: Performance• Operating Pressure:• Operating Temperature: Electrical• Voltage Rating:• Insulation Resistance:• Dielectric Withstanding:
Viton - 90 DurometerLeaded Nickel Copper, Stainless Steel HoodGold: Mil-G-45204, Type II, Grade C, Class 1 over .0001 Nickel Base
10,000 psig, bi-directional150°C @ 10,000 psig
600 vdc>10 gigohms @ 500vdc @ 200°C1,000 vdc
P/N 35876P/4S-MP/MT INSERT
O.D. .687Ø
4 #20 awg Sockets6 #20 awg Pins
TECHNICAL SPECIFICATIONS
-18-
WATERTIGHT ELECTRICAL TERMINATIONSechnologiesWET
.89.25
.25
.41
Ø.60
Ø.687
Description
This High Pressure/Temperature insert features a Toughened High Glass Thermoset Epoxy body whichprovides a bi-directional pressure barrier to 10kpsi @ 150°C.
Applications
• MWD/LWD Tools • Battery Packages • Downhole Electronic Enclosures • High Pressure Wellhead Exits • Geophone Arrays • D.S.U.S.
Materials• O-rings: • Contacts: • Contact Plating: Performance• Operating Pressure:• Operating Temperature: Electrical• Voltage Rating:• Insulation Resistance:• Dielectric Withstanding:
Viton - 90 DurometerLeaded Nickel Copper, Stainless Steel HoodGold: Mil-G-45204, Type II, Grade C, Class 1 over .0001 Nickel Base
10,000 psig, bi-directional150°C @ 10,000 psig
600 vdc>10 gigohms @ 500vdc @ 200°C1,000 vdc
P/N 35884P/6S-MP/MT INSERT
O.D. .687Ø
6 #20 awg Sockets4 #20 awg Pins
TECHNICAL SPECIFICATIONS
-19-
WATERTIGHT ELECTRICAL TERMINATIONSechnologiesWET
.89.25
.25
Ø.60
Description
This High Pressure/Temperature insert features a Toughened High Glass Thermoset Epoxy body whichprovides a bi-directional pressure barrier to 10kpsi @ 150°C.
Applications
• MWD/LWD Tools • Battery Packages • Downhole Electronic Enclosures • High Pressure Wellhead Exits • Geophone Arrays • D.S.U.S.
Materials• O-rings: • Contacts: • Contact Plating: Performance• Operating Pressure:• Operating Temperature: Electrical• Voltage Rating:• Insulation Resistance:• Dielectric Withstanding:
Viton - 90 DurometerLeaded Nickel Copper, Stainless Steel HoodGold: Mil-G-45204, Type II, Grade C, Class 1 over .0001 Nickel Base
10,000 psig, bi-directional150°C @ 10,000 psig
600 vdc>10 gigohms @ 500vdc @ 150°C1,000 vdc
P/N 3589-1010CC-MP/MT
PENETRATOR INSERTO.D. .687Ø
10 #20 awgPenetrator Contacts
TECHNICAL SPECIFICATIONS
.25Ø.687
-20-
WATERTIGHT ELECTRICAL TERMINATIONSechnologiesWET
.89.25
.25
Ø.60
Description
This High Pressure/Temperature insert features a Toughened High Glass Thermoset Epoxy body whichprovides a bi-directional pressure barrier to 20kpsi @ 200°C.
Applications
• MWD/LWD Tools • Battery Packages • Downhole Electronic Enclosures • High Pressure Wellhead Exits • Geophone Arrays • D.S.U.S.
Materials• Face Rings• O-rings: • Contacts: • Contact Plating: Performance• Operating Pressure:• Operating Temperature: Electrical• Voltage Rating:• Insulation Resistance:• Dielectric Withstanding:
AMPCO 45 - NiAlBrViton - 90 DurometerLeaded Nickel Copper, Stainless Steel HoodGold: Mil-G-45204, Type II, Grade C, Class 1 over .0001 Nickel Base
20,000 psig, bi-directional200°C @ 20,000 psig
600 vdc>10 gigohms @ 500vdc @ 200°C1,000 vdc
P/N 3596-1010CC-HP/HT
PENETRATOR INSERTO.D. .687Ø
10 #20 awgPenetrator Contacts
TECHNICAL SPECIFICATIONS
.25Ø.687
-21-
WATERTIGHT ELECTRICAL TERMINATIONSechnologiesWET
Ø.75 .89.25
.25
.41
Ø.60
Description
This High Pressure/Temperature insert features a Toughened High Glass Thermoset Epoxy body whichprovides a bi-directional pressure barrier to 20kpsi @ 200°C.
Applications
• MWD/LWD Tools • Battery Packages • Downhole Electronic Enclosures • High Pressure Wellhead Exits • Geophone Arrays • D.S.U.S.
Materials• Face Rings• O-rings: • Contacts: • Contact Plating: Performance• Operating Pressure:• Operating Temperature: Electrical• Voltage Rating:• Insulation Resistance:• Dielectric Withstanding:
AMPCO 45 - NiAlBrViton - 90 DurometerLeaded Nickel Copper, Stainless Steel HoodGold: Mil-G-45204, Type II, Grade C, Class 1 over .0001 Nickel Base
20,000 psig, bi-directional200°C @ 20,000 psig
600 vdc>10 gigohms @ 500vdc @ 200°C1,000 vdc
P/N 36114P/6S-HP/HT INSERT
NO KEY
6 #20 awg Sockets4 #20 awg Pins
TECHNICAL SPECIFICATIONS
-22-
WATERTIGHT ELECTRICAL TERMINATIONSechnologiesWET
Ø.75 .89.25
.25
.41
Ø.60
Description
This High Pressure/Temperature insert features a Toughened High Glass Thermoset Epoxy body whichprovides a bi-directional pressure barrier to 20kpsi @ 200°C.
Applications
• MWD/LWD Tools • Battery Packages • Downhole Electronic Enclosures • High Pressure Wellhead Exits • Geophone Arrays • D.S.U.S.
Materials• Face Rings• O-rings: • Contacts: • Contact Plating: Performance• Operating Pressure:• Operating Temperature: Electrical• Voltage Rating:• Insulation Resistance:• Dielectric Withstanding:
AMPCO 45 - NiAlBrViton - 90 DurometerLeaded Nickel Copper, Stainless Steel HoodGold: Mil-G-45204, Type II, Grade C, Class 1 over .0001 Nickel Base
20,000 psig, bi-directional200°C @ 20,000 psig
600 vdc>10 gigohms @ 500vdc @ 200°C1,000 vdc
P/N 36336P/4S-HP/HT INSERT
NO KEY
4 #20 awg Sockets6 #20 awg Pins
TECHNICAL SPECIFICATIONS
-23-