WB55 Features
NuWave Sensor Technology Ltd, DCU ALPHA, Old Finglas road, Glasnevin, Dublin 11
NuWave Sensor Technology LtdEmail: [email protected]
Website: www.nuwavesensors.com
WB55 Indoor Air Quality MonitorOverview
The AirSentric WB55 indoor air quality monitor is designed to meet the requirements of the Well Building Standard V1 and V2. The Well Building Standard is designed to enhance the health, well being and comfort of a building‘s occupants by optimising the design and specification of a building, including the management of air quality.
Features:• PM2.5, PM10 Particle concentration in µg/m3• Carbon Dioxide in ppm• Total VOCs (Volatile Organic Compounds) in µg/m3 and ppb• Formaldehyde CH2O in ppm
In addition, the WB55 complies with data monitoring and record keeping by integrating with NuWave’s online monitoring system which includes data storage and export.
CO2 SensorNDIR Sensor0-5000ppm)
Particle SensorLaser based PM2.5 / PM10
particle sensor
Temperature SensorImportant measure for a
controlled environment
WirelessEnables you to connect
multiple sensors
Easy Set-upPlug and Play Technologywill have the sensor running in minutes
AlertGet real-time alertswhen the values gooutside set limits
Humidity SensorMeasures the relativehumidity in the room
TVOC SensorMonitors air qualityusing VOC sensor
Formaldhyde SensorMonitors CH20
in ppm
Document Revision: 2.1
AirSentric
SENSORS
NuWave Sensor Technology Ltd, DCU ALPHA, Old Finglas road, Glasnevin, Dublin 11
SENSORS NuWave Sensor Technology LtdEmail: [email protected]
Website: www.nuwavesensors.com
Sensor Specifications:
You can monitor your connected WB55 sensor onlineand in real time using a NuWave Sensors cloud based‘HEX’ monitoring account. Set up is quick and easy –connect the data hub to an Ethernet point and yoursensor will connect wirelessly and send data online.Once connected, data can be analysed online or bedownloaded for more detailed analysis as well as linked with existing IT systems.
• Remote monitoring, analysis and alerts
• Plug & Play set up
• No need for additional monitoring software systems• API avaialble for integration into your software
NuWave’s Remote Monitoring System
Document Revision: 2.1
SENSORS
SENSORS
SENSORS
NuWaveSensors
Gateway Cloud
BMS API
Particulate Matter Particle Sizes PM2.5, PM10
PM Sensor Range 0 – 1000 µg / m3
PM Sensor Accuracy +/- 15%
Carbon Dioxide (CO2)
TVOC Sensor
Formaldhyde Sensor
Temperature
Humidity
CO2 Sensor Range 0 to 5000 ppm / 0.04 to 2% Volume CO2
CO2 Sensor Accuracy +/-40ppm +/-3% of reading
TVOC Sensor Range 125-600 ppb and µg/m3 output
TVOC Sensor Accuracy +/- 5 ppb
CH20 Sensor Range 0.03 to 2 ppm
CH20 Accuracy ±10% or ±30ppb
Temperature Range 0 to 50°C
Temperaure Accuracy (at –10 to 85 °C) ±1 °C (max)
Temp Sensor Stability < 0.01 °C/Y
RH Range 5 to 95% RH continuous
RH Accuracy (at 0–90% RH) ± 5% RH (max)
RH Sensor Stability < 0.25 %RH/yr
Size and Weight
Connectivity Options
Power
Accessories
Calibration
Software
Size Size (LxWxD) - 4in (100mm) x 6in (150mm) x 1.8in (45mm)
Weight 202g (enclosure weight without power adapter)
Zigbee Zigbee using GY36 Gateway (30m / 100ft range)
WiFi 802.11 b/g
Power Supply 100-240V International Adapter, DC 12V /- 10%, 420mA
Power Consumption 85mA @ 5V (385mA peak)
Operating Temperature 0°C to 50°C ( 32 F to 122 F)
Wall Mount Bracket is supplied
Calibration service available (typically required every 3 years, annual service option available)
Cloud Dashboard with no subscription fee for standard account
API available