26
We Keep the World in Motion. Business Unit Marine, Oil & Gas www.elinmotoren.at
We Keep
the World
in Motion.
Business Unit Marine, Oil & Gaswww.elinmotoren.at
Your motor will be manufactured in..
GERMANY
AUSTRIA … in one of Europe’s most modern motor- and generator
manufacturing sites! A certified quality production!
ELIN Motoren
HeadquartersPreding/Weiz
Since 2009
ELIN Motoren Sales OfficeSalzburg
Since 2000
ELIN Motoren
BosniaZivince
Since 2015
ELIN Motoren Lamination Shop
Preding/Weiz
Since 2001
Company Locations
The development and
manufacturing center
is among the most
modern worldwide
and possesses one of
the most advanced
testing laboratories.
Development and Manufacturing Center
Marine, Oil & GasProfit from our Experience in Following Sectors
Oil & Gas Applications:
• Asynchronous and slip ring motors for oil & gas (up-,
mid- and downstream applications)
• Air separation units
• Petro chemistry
• Explosion proof applications: Ex n, d, e, p
• Gas compressors (Transport or Process)
• Oil, Heat and cooling pumps
• Sustainable Technologies: H2, LNG, Methan, Ethan,…
Marine Applications:
• LNG applications
• Seismic research
• On- and offshore
• Hybrid package concepts: Propulsion,…
• Certified solutions for marine applications:
ABS, Bureau Veritas, DNV, KR, LR,…
Application: underground gas storage
16,5 MW, inverter driven, 97,8% eff. ATEX Ex-p design
Marine, Oil & GasCustomers Advantage with ELIN Products
20MW, 98,1% efficiency,
Start up current: 4x FLC
• Optimized motor design according to customer specification
• Low starting current
• High acceleration torque
• Low voltage drop on grid
• Highest application/system efficiencies (e.g. 20MW: 98,1%)
• Lowest vibration levels for safe operation with compressors
• European quality in design and materials
• Experience in retrofit projects
• Service network all over the world
Customer advantages for complete drive train when using ELIN motors:
Marine, Oil & GasExperiences in Special Starting Conditions
Start up via soft starter (Russia)
Customer specific starting conditions for different grid data:
• ELIN designs special motors for weak grids and difficult network data
• Low starting current
• High acceleration torque
• Low voltage drop on grid
• Further starting options
• Liquid starter (stepless)
• Oil-cooled Rheostat starter (stepped)
• Autotransformer
• Soft starter (electronic)
• Soft starter (FCMA)
• Starting inverter
Marine, Oil & GasAdvantages for Inverter Driven Motors
Inverter driven motors acc. API670, 97,8%eff.,
ATEX Ex-p, GOST- U certified
ELIN Motors match with nearly any MV inverter:
• High reliability in case of long term references
• Highest system efficiencies in defined speed ranges
• Low life time cycle costs and less maintenance
• Exp motors used with inverters in hazardous areas
• Ideal controlability in mid- and downstream applications
• Low stress on grid in case of low starting current
• Mechanical soft start for complete drive train
• Low spin operation to avoid mechanical deformation of
the shaft
Oil & GasExplosion Protection
Motors for hazardous areas
EEx nA solution applicable for zone 2
EEx p pressurized housing applicable for zone 1 and zone 2
EEx e increased safety applicable for zone 1 and zone 2
up to 6,6kV for Gas Group IIB
ELIN Motoren GmbH is certified to
produce motors according to the
ATEX regulations.
Air cooled
Motors
Water
cooled Motors
Motor Types & Cooling Methods
Water cooled + heat exchanger
IC81W 600 – 30000 kW
Slip ring motors
IC81W
500 – 15000 kW
Water jacket cooled
IC 7A0W7
50 – 2500 kW
Surface cooled
IC411
200 – 2500 kW
Air cooled
IC611
500 – 12000 kW
Tube cooled
IC511
200 – 8000 kW
MARINEMotor Portfolio 1/2
MARINEMotor Portfolio 2/2
Why to use ELIN Motoren?
High
EFFICIENCIES
CUSTOMER
focused
ATEX
Certification
High
QUALITY
Continuous
INNOVATION
High
RELIABILITY
Low Life
Cycle Cost
Flexible Order
Processing
Global
PlayerOver 125 Years
of Experience
Worldwide
Services
MARINE Certifications
DNV GL, ABS, LR, …
ISO 9001
Certification
SUSTAINABLE
Development
Modern
Test Field
Skilled
Technical Staff
Marine, Oil & GasReferences
• Type: HKM-171 E02
• Power: 5,300 kW
• Voltage: 6,000 V
• Cooling: Air- Water Cooled
• Quantity: 3
• Application: Turbo Compressor
Cameron
5R3MSG4G/30
• Highlight: Smoothness of
running
Max. Shaft peak to
peak level: 38 µm
Balancing quality G
0.8
Oil pump at NDE
Exp IIB T3, Zone 2
Starting current with
soft starter 3 x Ia
Project: GEA TECHNOFRIGO / „Krasnodar“
Location: Krasnodar, Russia
Year: 2010
• Type: HKM171E14
• Power: 2,000 kW
• Voltage: 6,600V
• Cooling: Air/Water
• Quantity: 1
• Application: Compressor for LNG
application
• Highlight: Exp IIB T3, Zone1
DNV certified
installation of motor
not in line with the
ship (longitudional)
special offshore
bearing design
Project: Burckhardt C./ „ GDF“
Location: worldwide
Year: 2014
• Type: HKL-180 Z02
• Power: 6,600 kW
• Voltage: 10,000 V
• Cooling: Air/Air
• Quantity: 2
• Application: Oilpump
• Highlight: Ex II 3G Ex pz e ib
IIC T3 Gc
Ambient -40° till +40°C
High level of
auxiliaries
Converter operation
speed range 800 till
3000 rpm
Project: Ruhrpumpen / “Kaztransoil“
Location: Kasachstan
Year: 2015
• Type: HKM-163 D04
• Power: 2,770 kW
• Voltage: 10,000 V
• Cooling: Air/ Water
• Quantity: 1
• Application: MAN Compressor
• Highlight: Exp IIB T3, Zone2
Pfisterer connection in
MTB
All terminal boxes and
pipings in stainless
steel
High level of
auxiliaries
Project: MAN / BASF „LUHYCLO“
Location: Germany
Year: 2013
• Type: HRM-080 C04
• Power: 7,850 kW
• Voltage: 6,000 V
• Frequency: 60 Hz
• Cooling: Air/Water
• Quantity: 3
• Application: Turbo Compressor
Siemens
• Highlight: KOSHA Design
Exp IIC T3 Zone2
Design
Brush lifting device
Start via liquid starter
Project: Siemens / „POSCO Korea“
Location: Korea
Year: 2012
• Type: MCZ-545 N04
• Power: 1,400 kW
• Voltage: 690 V
• Cooling: Water Jacket cooled
• Quantity: 3
• Application: Reciprocating
compressor
• Highlight: DNV Certified
Double shaft end
IM2202
Flange mounted
Operation on
seismic research ship
Project: LMF / „Western GECO“
Location: all over the world
Year: 2012
• Type: HKR-110 Z02
• Power: 3,075 kW
• Voltage: 6,600 V
• Cooling: Air
• Quantity: 3
• Application: Turbo Compressor
• Highlight: Exp II A T3
Low noise level at
2-pole Motor 83 dB(A)
Starting current
4.4-times FLC
Project: MAN / „Rasfuel“
Location: Qatar
Year: 2005
Courtesy of MAN Turbo
• Type: HKR-112 Z16
• Power: 1,680 kW
• Voltage: 6,000 V
• Cooling: Air/Air
• Quantity: 2
• Application: LMF Compressor
• Highlight: 373 rpm (16-poles)
Exe IIB T3 Zone2
Frame size 1250mm
High load interia
3500kgm²
High starting torque
0,95xFLT
IPS Standard
(Iranian Petroleum
Standard)
Project: LMF/“Sarvestan and Saadat Abad Oil Field“
Location: Iran
Year: 2011
• Type: HKL-180 D02
• Power: 6900 kW
• Voltage: 6300 V
• Frequency: 50 Hz
• Speed: 2984 rpm
• Cooling: Air/ Air cooled
• Quantity: 2 pieces
• Application: Compressor
• Highlight: Exp IIB T3 Zone 2
ambient temp
-30 up to +55°C
start up via soft starter
starting current:
2,5xFLC
low shaft vibration
below 35µm
Project: CAMERON, Tashkent
Location: Uzbekistan
Year: 2014
• Type: HKE-550 L02
• Power: 930 kW
• Voltage: 6,000 V
• Cooling: Air (IC411)
• Quantity: 1
• Application: Turbo Compressor
• Highlight: EExe IIB T3 Zone 1
Highest efficiency
η=97,67%
Run out max 12,5µm
Shaft vibration max
50µm
Noise level at load
max. 80dB
Project: Kobelco Japan / „Borealis PP“ / Neste Oil
Location: Schwechat, Austria
Year: 2008
• Type: HKM156Z02 &
HKM171Z04
• Power: 2,700 kW &
4,400 kW
• Voltage: 10,500 V
• Cooling: Water
• Quantity: 1 + 1 piece
• Application: Compressor for
nitrogen
• Highlight: Replacement motors
Project: Linde / „NiHa-Harjavalta“
Location: Harjavalta, Finland
Year: 2016
Old Motor Brand „ABB“:
Contact
Günther MAIER
Business Unit Marine, Oil & Gas
Director
Phone: +43 3172 90 606-2731
Fax: +43 3172 90 606-1504
Mobile: +43 664 80 838 2731
Lukas LASSBACHER
Business Unit Marine, Oil & Gas
Technology & Sales
Phone: +43 3172 90 606-2732
Fax: +43 3172 90 606-1504
Mobile: +43 664 80 838 2732
