+ All Categories
Home > Documents > We need to determine where the camera will be positioned from the object. Lárus Guðmundsson...

We need to determine where the camera will be positioned from the object. Lárus Guðmundsson...

Date post: 08-Jan-2018
Category:
Upload: calvin-magnus-lucas
View: 219 times
Download: 0 times
Share this document with a friend
Description:
Limits: Length of A increases -> Camera distance increases. Length of B increases -> Length of A increases We are limited by parameters. Camera distance 370 mm A B
7
We need to determine where the camera will be positioned from the object. Camera distance Lárus Guðmundsson Hönnun 2012
Transcript
Page 1: We need to determine where the camera will be positioned from the object. Lárus Guðmundsson Hönnun 2012.

We need to determine where the camera will be positioned from the object.

Camera distance

Lárus GuðmundssonHönnun 2012

Page 2: We need to determine where the camera will be positioned from the object. Lárus Guðmundsson Hönnun 2012.

The GoPro offers 170° FOV (Field of View) while using 720p resolution.

FOV goes down to 127° if we use the 1080p.Since it‘s a fisheye lense effect we will have to determine how to get the best view.

Camera distance and it‘s limits

http://www.space.com/10709-telescope-laser-photos-adaptive-optics.htmlhttp://gopro.com/cameras/hd-hero2-outdoor-edition/

Page 3: We need to determine where the camera will be positioned from the object. Lárus Guðmundsson Hönnun 2012.

Limits:• Length of A

increases ->

Camera distance increases.

• Length of B increases

-> Length of A increases

We are limited by parameters.

Camera distance 370 mm

A B

Page 4: We need to determine where the camera will be positioned from the object. Lárus Guðmundsson Hönnun 2012.

Optimal camera distance was determined

by experiments.

• Distance from camera: 370±

10mm

Length of B (from object to the box) is

dependant upon the camera distance.

• Distance B: 100± 10mm

Optimal distance

Page 5: We need to determine where the camera will be positioned from the object. Lárus Guðmundsson Hönnun 2012.

Adjust angle of cameraso the box will not be visible.

Page 6: We need to determine where the camera will be positioned from the object. Lárus Guðmundsson Hönnun 2012.

Must be as light as possible.

• Camera box: Plastic.• Camera fastener: Carbon fiber

square profile.• Box: Styrofoam.• Object fastener: Carbon fiber rods.

Materials

Page 7: We need to determine where the camera will be positioned from the object. Lárus Guðmundsson Hönnun 2012.

Thank you for you attention.


Recommended