Weapons and AccessoriesCamouflage Systems
Weapons and accessories camouflage Systems are designed to beinstalled on a wide variety of personnel equipment and weaponssystems to reduce detectable signatures in an operationalenvironment.
MATERIAL KEY SPECIFICATIONS:
• Available in customizable patterns/Kits
• Fully operated by end user/ self sustainable
• Easy installation and reconfiguration, no special tools orprocesses required
• Operating temperature range of -60F to 267F
• Non- Damaging, Simple removal
• Will not interfere with gauging or function
• Deet Proof (tested in 40% solution saturation and soak)
• RTCA/DO160 Category B (25 cycles) which combinesaltitude with humidity and freezing temperatures.
• Non Toxic – Environmental contaminants resistant.Common contaminants of interest include cleaning agents,lubricants, insecticides, and fuels. Military and aerospaceapplications as detailed in MIL-STD-810 and RTCA/DO 160.
• MIL-STD-810 Blowing sand, dust and settling dust.
• MIL-STD-810 & the new Telcordia/Verizon Wind DrivenRain specification. This includes rain of various amountsand wind exceeding 100 MPH. It also includes hose down,pressure wash, depth immersion, and condensation drip.
• Xenon, UVA, UVB. Xenon arc testing is the best availablesimulation of full-spectrum sunlight available becauseit includes ultraviolet, visible and infrared light. Filteredxenon arc lamps are the best way to test the light stabilityof products, such as pigments, dyes and inks, which aresensitive to the long-wave and visible wavelengths ofsunlight. Full spectrum xenon arc lamps reproduce thedamaging wavelengths of light encountered either indoorsor outdoors.
• MW Defense Systems holds the United States andInternational Patent Application for the Multi-Ply™,MW Grips™, and Photo Real™ Product lines.
camouflage technologies that are tailored to the operational areas that are not close too, but exacting
be removed as the mission progresses through separate environments. MW Grips™ product line hasbeen developed for use with all MW Defense Systems’ applied camouflage products where traction,handling, and control are needed most.
Weapons and AccessoriesCamouflage Systems
Visit us on the web:www.militarywraps.com
3400A David Street, Lumberton, NC 28358 • Tel. (910) 671-0008 • Fax. (910) 671-0137
Each kit incorporates Photo-Stealth™, MW Multi-ply™ and MW Grips™. MW Defense Systems offers
matches through Photo-Stealth™. Multi-Ply™ materials allow single use layer or multiple layers that can
MW GRIPS™
Military Wraps®, Inc.3400 A David Street, Lumberton, NC 28358
Tel: 910.671.0008 – Fax 910.671.0137CAGE CODE 4SMT9
www.militarywraps.com
MW GRIP’s Kits come with all the material needed for application and includes all necessary tools and instructions. Application takes approximately two hours and requires no chemical treatment or physical changes to your weapon. Removal is fast and easy and will not leave any residue on the weapon. The GRIP’s material is an extremely high performance self adhering product that is long lasting and resistant. Each kit contains ample amounts of the Camouflage treatment needed to complete the weapon, accessories, and have extra to make any running repair needed. MW GRIP’s weapon and accessories kits add a layer of protection against the elements and detection like no other product can compare to.
Standard Patterns for kit selections: Other Patterns are available and are no charge for Armories’ kits.
Single weapon kits require a minimum order for custom or additional pattern selections.
US Government customers, call for special pricing.
Patterns are trade mark property of MW Defense Systems™ INC.
Hand Gun • Carbine • M249 KitLong Gun • M16-A2 • Shot Gun Armories’ Kit SML (Treats about 30 weapons)Armories’ Kit MED(Treats about 60 weapons) Armories’ Kit LG(Treats about 120 weapons)
All Major credit cards, Government purchase cards accepted, call for delivery.