Metal Processing Experts Why Choose Us? Professionals Delivering Extraordinary Value at Competitive Prices Services for Steel Plate and Structural: Shot Blasting, Priming, Cutting, Bending, Etching Focus on Quality Management Capabilities for Custom Fabrication and Finished Coating / Paint Efficient Transportation Options: Truck, Rail, and Barge OFFICE ADDRESS: 1800 Paul Thomas Boulevard, Brownsville, PA 15417 PHONE NUMBER: 724-785-2575 EMAIL ADDRESS: [email protected]WEBSITE: www.hl-fabrication.com Since 2005 Pennsylvania Pittsburgh Brownsville Brownsville HL Fabrication HL Fabrication Heartland Fabrication PERSONABLE. RELIABLE. FLEXIBLE.
Transcript
Metal Processing ExpertsWhy Choose Us?
Professionals Delivering Extraordinary Value at Competitive PricesServices for Steel Plate and Structural: Shot Blasting, Priming, Cutting, Bending, EtchingFocus on Quality ManagementCapabilities for Custom Fabrication and Finished Coating / PaintEfficient Transportation Options: Truck, Rail, and Barge
OFFICE ADDRESS: 1800 Paul Thomas Boulevard, Brownsville, PA 15417PHONE NUMBER: 724-785-2575EMAIL ADDRESS: [email protected]: www.hl-fabrication.com
Heartland Fabrication offers a fully equipped machine and fabrication shop. CNC processes are used in both fabrication and machining of all our products. We deliver a top quality product that fully meets our customer’s specifications.
A Quality Service at a Competitive Price
• Plate thicknesses from 3/ 16" up to 2"• Plate width from l' up to and including 12'-0"• Plate lengths from 10' up to and including 50'• Plate weight 19,000 lbs and below (500 lbs/sqft on conveyance)• Run speed to 10 feet/minute• Paint medium - water based• Coating thickness minimum ½ mill OFT
Plate Processing: Shot Blasting andAutomated Prime Paint System
• Structural material up to and including 15" wide
• Hypertherm Edge-Pro CNC controller• Hypertherm HPR 400 plasma systems• Hypertherm single 360° bevel head• Cutting thickness: straight cut 1/8" - 2"; bevel cut 2" on a maximum angle of 45°• Cut dimensions: 12' x 41'• Same as bevel head systems, except has 1 each straight master and 1 each straight slave torch heads
• Cutting capacities up to 18"w x 22''h• Tilt blade angle - from 22-1/2° up to 45° left or right.• Thicknesses from ¼" - l"
Horizontal Band Saw Cutting Station• Cutting capacities to 47" x 31 -1/2" straight cuts.• Auto feed option and programmable sequencing for repetitive part cutting.• Material auto feed length of 118"• Powered in-feed and out-feed conveyance.
• Five (5) water tables for cutting, each 13' x 42'. These are in line, with the three plasma gantries listed above running on one common set of rails• Hypertherm Pronest nesting software, to program cuts and nest plates to maximize plate and minimize scrap.
Plasma System Accessories
• 105 ton capacity, 12" throat depth.• Shear bars ¼" x 24", ½" x 20", ¾" x 12", 1" x 8"• 90° angle shear: sever cut 6" x 6" x ½", slug cut 4" x 4" x 3/8"• Miter angle to 45°: bar shear 4" x 4" x ½", slug shear 4" x 4" x 3/8", channel shear 2”, 3", 4", 5" and 6"• Rod shear up to 1-1/4" round or square stock.• Cope notch to 90° angle for vatrous pipe sizes.• Strokes/minute: variable from 8 to 40, depending on thickness of material.
• Two double leg cranes, 30 ton capacity• Three overhead cranes, 25/15 ton capacity• One single leg crane, 5/5 ton capacity (for the 1,000 ton tandem press)• One single leg crane, 5/5 ton capacity (for misc. fitting operations)
Two presses which can work in tandem that have the ability to form:• Compatible for forming extra-long pieces.• Single beds are forty (40') long, in tandem can bend up to and including 41'-0"• Thickness range 1/8" to 1"• Continuous die effect.
