Webber Electronic Catalogue - И7 - NORGREN … · SOLENOID valves in valve technology The...

SOLENOIDvalves

in valve technology

The Controlling force

ElectronicElectronicProductProduct

CatalogueCataloguePRESPRESS to EnterS to Enter

How to Use this Online Guide

1. Use the buttons in the toolbar at the top of thisscreen to page forward or page back, customise yourscreen view or zoom in on items for detailed viewing.

2. Select the Bookmark button (second from the left inthe toolbar) to display a list of contents on the leftportion of your screen. Click any item in the index todisplay the Catalogue Section or Data Sheet required.

3. Alternatively, you can click on any item in theCatalogue’s Contents Page, Product Overview Sectionsor Product Selection Guide to take you directly to yourselected Data Sheet.

Note: This document is designed for view only use.For instructions on how to print this catalogue or for further assistance, please contact Marketing at the address below.

in valve technologyThe Controlling force

Welcome to the 1999 Solenoid Valve Product Catalogue

IMI Webber Ltd.,City Business Park, Easton Road, Easton, Bristol BS5 0SP.Tel: 0117 955 5511 Fax: 0117 955 1400www.imiwebber.co.uk E-mail: [email protected]

Introduction 1

Product Selection Guide 2

2 Way Solenoid Valves 3

3 Way Solenoid Valves 4

2 Way Servo Assisted Valves 5

Special Application Valves 6

Accessories 7

Technical Information 8

Table of Contents

Issue 1 LM/5/99in valve technologyThe Controlling force

in valve technologyThe Controlling forceIssue 1 LM/5/99

An InternationalOrganisationIMI Webber Ltd. is a subsidiary of the internationally renowned IMI Fluid PowerGroup and a major manufacturer of solenoidvalves within IMI Norgren’s Global ValveDivision.

With headquarters based in Bristol UK,products are supplied to companies across theUnited Kingdom, as well as exported to some70 countries overseas via the internationalNorgren sales network.

Experience and InnovationIMI Webber was established in 1928 and hasbeen designing and manufacturing solenoidvalves for over three decades. Webber specialise in the development of solenoidvalves for specialist OEM markets, but alsohave a comprehensive range of standard products.

Our excellent reputation is built upon a foundation of innovative, flexible and efficientdesign, enhanced by the practise of rapiddevelopment and prototyping techniques.

Our formula for effective design is combinedwith advanced manufacturing processes evident in the development of the latest coilwinding, laser welding and automated testequipment.

Quality and ServiceAt IMI Webber we are committed to providingthe best possible customer service. From theoutset, customers are involved in a close partnership with Webber ensuring total integration between both parties’ design,production and sales departments.

Our products are manufactured to the higheststandards of quality, justly reflected in our ISO9001 approval.

IMI Webber Headquarters in Bristol, UK

The latest design and development techniques areemployed at Webber

Automated productiontechnology allowsWebber to meet eventhe most demandingschedules

IntroductionTThe Che Companompanyy


A Comprehensive Range ofStandard ProductsIMI Webber offer a comprehensive range ofdirect acting and servo assisted solenoidvalves for use with air, water and non corrosivemedia. Products are available in two and threeway form and are offered in 15mm, 22mm and32mm series sizes. A variety of industry standard port sizes, body styles and manifoldmountable options are available.

A wide choice of orifice size and power combinations is offered within each series,enabling you to select the most suitable specification for your application.

Special ApplicationSolenoid ValvesIf you cannot find what you need within thestandard Webber product range, that doesn’tmean that we can’t do it. IMI Webber havemany years of experience in developing solenoid valves for applications as diverse asthe drinks dispense, automotive and medicalindustries, to name but a few.

Our special application valves are capable ofhandling a wide selection of fluids and aresuitable for use in some of the most demanding environments.

Bespoke DesignWebber specialise in providing tailored solenoid valve solutions. With a large OEMcustomer base, we are proficient in designingand developing bespoke connection valvesthat will integrate fully with your own systemrequirements.

Whatever your specification, our team ofexperts will work with you to devise the mostcost effective solution for your needs.

NONLubricated

Solenoid valves from Webber have been customisedto provide solutions to a host of applications

Special products have been developed to copewith corrosive media and difficult environments

Standard solenoid valves from Webber are availablein 15mm, 22mm and 32mm sizes complete with arange of port connections

IntroductionTThe Phe Prroo ducduc t Rt R angeange


How to use this CatalogueThis catalogue is designed to enable you toquickly locate and select a solenoid valve fromWebber’s standard and special applicationproduct ranges.

1. The Product Selection Guide in Section 2summarises all product variants availableacross all standard ranges, each of which iscross referenced to a data sheet number forease of location.

2. Each section has an indexed ProductOverview, enabling you to select a productfrom the section “at a glance”.

3. All data sheets are colour coded accordingto product series and contain detailedtechnical information together with the product’s most salient features and benefits.

How to OrderModel numbers for all standard products arelisted in the data sheets. Please contact ourSales Team (see below) quoting the modelnumber for your selection. Our sales personnel will be pleased to provide you withthe necessary price and delivery information.

If you cannot see the product specification thatyou require, or if you would like a customisedvalve for a specific application, please contactour Technical Sales Experts (see below), whowill be pleased to offer additional assistance.

How to Contact UsFor all enquiries please contact us at our headquarters in Bristol:

IMI Webber Ltd.City Business Park, Easton Road, Easton,Bristol BS5 0SPTel: 0117 955 5511Fax: 0117 955 1400www.imiwebber.co.uke-mail: [email protected].

Our lines are open:

8.30 a.m. to 5.00 pm Monday to Thursday 8.30 a.m. to 1.30 p.m. on Friday

G 1

3/2

NC

3/2

NO

Product Selection Guide3/2 solenoid v3/2 solenoid valvalveses

Dat

a Sh

eet

Seri

es

Pre

ssu

re (b

arg

)

G 3

/4

G 1

/2

G 3

/8

G 1

/4

G 1

/8

M5

Ho

seta

il

CN

OM

O

Inte

rfac

e

Wat

er M

gt

Port ConnectionsType

Serv

o

Man

ifold

Mo

un

tab

le

Body

Por

ted

Oth

er

Orifice (mm)

4.0

2.8/

3.0

2.5

2.0

1.5/

1.6

1.0

0.75

/0.8

> 4

.0

Fluids

Lig

ht

Oil

Air

/Gas

Wat

er/I

ner

tLi

qu

ids

Sect

ion

Issue 2 LM/10/99

Note: For special application or bespoke design valves please refer to Section 6 of Product Catalogue


0 - 10 15 mm 4 2.1.01/02

0 - 10 22 mm 4 2.2.01

0 - 12 22 mm 4 2.2.02

0 - 12 22 mm 4 2.2.03/04

0 - 7 22 mm 4 2.2.05

0 - 16 30 mm 4 2.2.06

0 - 16 32 mm 4 2.3.01

0 - 16 32 mm 4 2.3.02

0 - 16 32 mm 4 2.3.03/04

0 - 14 32 mm(bp) 4 2.4.01/02

0 - 6 15 mm 4 2.1.01/02

0 - 12 22 mm 4 2.2.02

0 - 10 22 mm 4 2.2.03

0 - 16 32 mm 4 2.3.01

0 - 16 32 mm 4 2.3.03

0 - 14 32 mm(bp) 4 2.4.01/02

2/2 NC

22 mm

22 mm

M5 Body ported 1.0, 2.0 0 - 10 1.1.011.1.01

2/2 NC G 1/8 Body ported1.0, 1.6

2.0, 3.00 - 10 1.1.021.1.02

22 mm2/2 NC

Interface

(G1/8)

Manifold

mountable

1.0, 1.62.0

0 - 101.1.031.1.03

1.1.041.1.04

22 mm2/2 NC Hosetail

Spigots to suit

6mm I/D

tubing

2.0 0 - 10 1.1.051.1.05

32 mm2/2 NC G 1/8 Body ported

1.0, 1.6

2.0, 2.50 - 16 1.2.011.2.01

32 mm2/2 NC G 1/4 Body ported

2.0, 2.5, 3.0,

4.0, 4.5, 6.30 - 16 1.2.021.2.02

Product Overview

2/2 dir2/2 direcec t act ac ting solenoid vting solenoid valvalveses

Seri

es

Mo

del

Fun

ctio

n

Po

rt C

on

nec

tio

ns

Typ

e

Ori

fice

(mm

)

Pre

ssu

re (b

arg

)

Dat

a Sh

eet

Issue 1 LM/5/99

Continued overleaf

in valve technology


Voltage Tolerance + 10% as standardDC Power2, 3.4, 7.5 W (6 W for 24V d.c. high power coils)

AC Power Hold/Inrush 2.5/4, 8/12 VA (5/9 VA for 230V 50/60 Hz a.c. low power coils)Typical Electrical On 10 to 20 msResponse Time Off 5 to 10 msProtection Class IP 65 (DIN 40 050) with connector plug fittedElectrical Duty 100 % (Continuously rated)Coil

22mm removable encapsulatedElectrical Connections 3 flat pin (Industrial standard)Connector Plug Supplied without plug.Refer to data sheet 6.2.01 to order separately.Manual Override Screwdriver - memory type(Turn 180° anti-clockwise to operate) Push button - non memory type

Inlet Orifice Kv m3/h NFPA Cv l/min1.0 mm 0.026 0.029 29.01.6 mm 0.068 0.078 77.02.0 mm 0.100 0.115 113.0

3/2 Valves22mm manif22mm manifold mounold mountted G1/8ed G1/8

Please consult our Technical SalesDepartment for further information Lever manual override - memory type Extended push button manual override Viton (FPM) seal material - add prefix ‘V’ tomodel number 2 wire electrical flying leads Table B DIN 43650 electrical connections Vacuum operation Non standard a.c. and d.c. voltages up to+ 30% tolerance

Individual sub bases and manifolds- please refer to data sheet 6.1.01 Individual 32mm interface valves- please refer to data sheet 2.2.03 Connector plugs - please refer to datasheet 6.2.01 to order separately

17.2

32.6

67

87 57

25

12

All Ports 1/8 BSP

74

8.5M4 Fixing Holes

24

99

Dimensions (mm)

Flow Characteristics - Air*

Options and Accessories

* l/min calculation tested at 6 barg in, 5 barg out

Porting Configuration

Electrical Details

Please refer to Webber TechnicalInformation Sheet 1 (Section 8 of ProductCatalogue) for porting configurationdetails.

IMI Webber Ltd. has a policy of continuous product development and reserves the right to change specifications without prior notice. Issue 1 LM/5/99

Tel: 0117 955 5511 Fax: 0117 955 1400IMI Webber Limited, City Business Park, Easton Road, Easton, Bristol BS5 0SP

www.imiwebber.co.uk e-mail: [email protected]/2/2

Technical Specification

Medium:Compressed air, filtered, lubricated

and non-lubricated

Light oil, water and other non

corrosive liquids and gases

Operation:

Poppet valve, directly actuated with

spring return

Mounting:

M4 threaded holes in manifold on

centres as shown overleaf

Port Size:G1/8

Operating Pressure:

0 to 12 barg (maximum)

Inlet Orifice Sizes:

1.0, 1.6 and 2.0 mm

Flow Characteristics:

29 to 113 l/min.

See Flow Characteristics table

overleaf for individual details

Operating Temperature:

-20°C* to +90°C supply

-20°C* to +50°C ambient

* Consult Technical Service for use below +2°C

Life Expectancy:

Typically in excess of 20 million cycles

Weight (without plug):

130 g (single station)

N x 130 g (multiple stations)

Materials:

Valve base: moulded plastic

Coil: glass reinforced epoxy compound

Manifold: aluminium

Armature: stainless iron

Stem tube: stainless steel

Springs: stainless steel

Seals: nitrile rubber


Compact, 22mm miniature solenoid

valves

1 to 40 station manifold systems

G1/8 port connections

Low power option

Memory and non-memory type manual

overrides

Diffuser supplied

Ordering Information

To order, quote model number, inserting number of

stations required at ## (01 to 40), followed by the voltage

code for your power requirement at** from the table below

3/2 Normally Closed

**Voltage Codes

DC Supply Power(W) Code AC Supply Power(VA) Code

12V 7.5 CB 24V 50/60Hz 8 BB

3.4 BB2.5 CC

2 EB 48V 50/60Hz 8 BE

24V 6 PC2.5 CF

3.4 BC 110/120V 50/60Hz 8 BF

2 EC2.5 CG

230V 50/60Hz 8 BJ

5 PB

Other voltages available on request

Model Number Orifice Pressure Power Manual

(mm) (barg) (W/VA) Override

3/2 Normally Closed

810391##/31204110/** 1.0 12 6,7.5/8 None

810391##/31204716/** 1.6 10 6,7.5/8 None

810391##/31204720/** 2.0 7 6,7.5/8 None

810391##/31304110/** 1.0 12 6,7.5/8 Screwdriver

810391##/31304716/** 1.6 10 6,7.5/8 Screwdriver

810391##/31304720/** 2.0 7 6,7.5/8 Screwdriver

810391##/31D04110/** 1.0 12 6,7.5/8 PushButton

810391##/31D04716/** 1.6 10 6,7.5/8 PushButton

810391##/31D04720/** 2.0 7 6,7.5/8 PushButton

810391##/34204110/** 1.0 10 3.4/5,2.5 None

810391##/342041716/** 1.6 3 3.4/5,2.5 None

810391##/34204720/** 2.0 3 3.4/5,2.5 None

810391##/34304110/** 1.0 10 3.4/5,2.5 Screwdriver

810391##/34304716/** 1.6 3 3.4/5,2.5 Screwdriver

810391##/34304720/** 2.0 3 3.4/5,2.5 Screwdriver

810391##/34D04110/** 1.0 10 3.4/5,2.5 PushButton

810391##/34D04716/** 1.6 3 3.4/5,2.5 PushButton

810391##/34D04720/** 2.0 3 3.4/5,2.5 PushButton

810391##/34304188/** 1.0 10 2.0/5,2.5 None

810391##/35304188/** 1.0 10 2.0/5,2.5 Screwdriver

810391##/34D04188/** 1.0 10 2.0/5,2.5 PushButton

2.2.042.2.04 /1/1

Issue 1 LM/5/99

in valve technology


The Product Selection Guide in Section 2 is designed forrapid product location

Each Section containsa Product Overviewfor “at a glance”selection

Data sheets are comprehensiveand contain complete modelnumbers for ease of ordering

IntroductionTThe Phe Prroo ducduc t Ct Caatalotalo guegue


2/2

NC

Dat

a Sh

eet

Seri

es

Pre

ssu

re (b

arg

)

G 1

G 3

/4

G 1

/2

G 3

/8

G 1

/4

G 1

/8

M5

Ho

seta

il

CN

OM

O

Inte

rfac

e

Wat

er M

gt

Port Connections Type

Serv

o

Man

ifold

Mo

un

tab

le

Body

Por

ted

Oth

er

Orifice (mm)

4.0

2.8/

3.0

2.5

2.0

1.5/

1.6

1.0

0.75

/0.8

> 4

.0

Fluids

Lig

ht

Oil

Air

/Gas

Wat

er/I

ner

tLi

qu

ids

Sect

ion

Issue 2 LM/10/99



0 - 10 22 mm 3 1.1.01 0 - 12 22 mm 3 1.1.02 0 - 12 22 mm 3 1.1.03/04

0 - 10 22 mm 3 1.1.05 0 - 10 Special(22mm) 6 4.1.01

0 - 16 32 mm 3 1.2.01 0 - 16 32 mm 3 1.2.02

0 - 16 32 mm 3 1.2.03/04 0 - 20 35 mm 3 1.3.01 0.1 - 16 Servo 5 3.1.01

G 1

3/2

NC

3/2

NO


Dat

a Sh

eet

Seri

es

Pre

ssu

re (b

arg

)

G 3

/4

G 1

/2

G 3

/8

G 1

/4

G 1

/8

M5

Ho

seta

il

CN

OM

O

Inte

rfac

e

Wat

er M

gt

Port Connections Type

Serv

o

Man

ifold

Mo

un

tab

le

Body

Por

ted

Oth

er

Orifice (mm)

4.0

2.8/

3.0

2.5

2.0

1.5/

1.6

1.0

0.75

/0.8

> 4

.0

Fluids

Lig

ht

Oil

Air

/Gas

Wat

er/I

ner

tLi

qu

ids

Sect

ion

Issue 2 LM/10/99



0 - 10 15 mm 4 2.1.01/02 0 - 10 22 mm 4 2.2.01

0 - 12 22 mm 4 2.2.02 0 - 12 22 mm 4 2.2.03/04

0 - 7 22 mm 4 2.2.05 0 - 16 30 mm 4 2.2.06

0 - 16 32 mm 4 2.3.01 0 - 16 32 mm 4 2.3.02

0 - 16 32 mm 4 2.3.03/04 0 - 14 32 mm(bp) 4 2.4.01/02

0 - 6 15 mm 4 2.1.01/02 0 - 12 22 mm 4 2.2.02

0 - 10 22 mm 4 2.2.03 0 - 16 32 mm 4 2.3.01

0 - 16 32 mm 4 2.3.03 0 - 14 32 mm(bp) 4 2.4.01/02

2/2 NC22 mm

22 mm

M5 Body ported 1.0, 2.0 0 - 10 1.1.011.1.01

2/2 NC G 1/8 Body ported1.0, 1.62.0, 3.0

0 - 10 1.1.021.1.02

22 mm 2/2 NCInterface

(G1/8)Manifold

mountable1.0, 1.6

2.00 - 10

1.1.031.1.031.1.041.1.04

22 mm 2/2 NC HosetailSpigots to suit

6mm I/D tubing

2.0 0 - 10 1.1.051.1.05

32 mm 2/2 NC G 1/8 Body ported1.0, 1.52.0, 2.5

0 - 16 1.2.011.2.01

32 mm 2/2 NC G 1/4 Body ported2.0, 2.5, 3.0,4.0, 4.5, 6.3

0 - 16 1.2.021.2.02

Product Overview2/2 dir2/2 direcec t act ac ting solenoid vting solenoid valvalveses

Seri

es

Mo

del

Fun

ctio

n

Po

rt C

on

nec

tio

ns

Typ

e

Ori

fice

(mm

)

Pre

ssu

re (b

arg

)

Dat

a Sh

eet

Issue 2 LM/10/99

Continued overleaf



2/2 NC32 mmInterface

(G1/8)Manifold

mountable0 - 16 1.2.031.2.03

1.2.041.2.04

Seri

es

Mo

del

Fun

ctio

n

Po

rt C

on

nec

tio

ns

Typ

e

Ori

fice

(mm

)

Pre

ssu

re (b

arg

)

Dat

a Sh

eet

1.0, 1.52.0, 2.5

2/2 NC35 mmG1/4G1/8G1/2

0 - 100 - 20

1.3.011.3.0110.0


Bodyported


Medium:Compressed air, filtered, lubricatedand non-lubricatedLight oil, water and other non corrosive liquids and gases

Operation:Poppet valve, directly actuated withspring return

Mounting:Two holes in base to suit No 4 selftapping screws

Port Size:M5

Operating Pressure:



1.0 and 2.0 mm


29 to 113 l/min.See Flow Characteristics table overleaf for individual details



-20°C* to +50°C ambient* Consult Technical Service for use below +2°C

Life Expectancy:


Weight:

95 g (without plug)

Materials:

Base: moulded plasticCoil: glass reinforced epoxy compound Armature: stainless ironStem tube: stainless steelSprings: stainless steelSeals: nitrile rubber (viton top seat)

2/2 Valves22mm M522mm M5

Compact, 22mm miniature solenoidvalves

In line M5 ported base

Removable and interchangeable coils

Low power option

Lightweight plastic moulded base

1.1.011.1.01/1/1


To order, quote model number inserting voltage coderequired at * from the table below

2/2 Normally Closed

*Voltage Codes


12V 7.5 2 24V 50/60Hz 8 43.4 2 2.5 42 2 48V 50/60Hz 8 6

24V 6 3 2.5 63.4 3 110/120V 50/60Hz 8 82 3 2.5 8

230V 50/60Hz 8 95 9



Model Number Orifice Pressure Power Manual(mm) (barg) (W/VA) Override

2/2 Normally Closed†VWD2M1D1-A12*J 1.0 10 6 or 7.5 / 8 NoneVWD2M1H1-A12*J 2.0 10 6 or 7.5 / 8 NoneVWD2M1D1-A19*J 1.0 10 3.4 / 5 NoneVWD2M1H1-A19*J 2.0 3 3.4 / 5 NoneVWD2M1D1-A11*J 1.0 10 2 / 2.5 or 5 None†2/2 normally open models also available - please contact Technical Sales fordetails

Voltage Tolerance + 10% as standard

DC Power 2, 3.4, 7.5 W (6 W for 24V d.c. high power coils)

AC Power Hold/Inrush 2.5/4, 5/9, 8/12 VA (5/9 VA for 230V 50/60 Hz a.c. low power coils)

Typical Electrical On 10 to 20 msResponse Time Off 5 to 10 ms

Protection Class IP 65 (DIN 40 050) with connector plug fitted

Electrical Duty 100 % (Continuously rated)

Coil 22mm removable encapsulated

Electrical Connections 3 flat pin (Industrial standard)

Connector Plug Supplied without plug.Refer to data sheet 6.2.01 to order separately.

Manual Override None


Please consult our Technical SalesDepartment for further information 2/2 normally open valves Viton (FPM) seal material 2 wire electrical flying leads Table B DIN 43650 electrical connections 30mm low power coils with Table A DIN

43650 electrical connections Zero power latching (impulse) coils Vacuum operation Non standard a.c. and d.c. voltages up to

+ 30% tolerance Connector plugs - please refer to data

sheet 6.2.01 to order separately

Dimensions (mm) Options and Accessories



Inlet Orifice Kv m3/h NFPA Cv l/min

1.0 mm 0.026 0.029 29.02.0 mm 0.100 0.115 113.0



Electrical Details



www.imiwebber.co.uk e-mail: [email protected]

1.1.011.1.01/2/2

44 CRS

54

2 PortsThreaded M5

6.5

11

31

64

22

15

2 Holes to SuitNo 4 Self Tapping Screws

26

22

Port 2 Port 1

10

37.5

71


2/2 Normally Closed33604110/** 1.0 12 6 or 7.5 / 8 None33604116/** 1.6 11 6 or 7.5 / 8 None33604120/** 2.0 10 6 or 7.5 / 8 None33604130/** 3.0 5 6 or 7.5 / 8 None33904110/** 1.0 12 6 or 7.5 / 8 Screwdriver33904116/** 1.6 11 6 or 7.5 / 8 Screwdriver33904120/** 2.0 10 6 or 7.5 / 8 Screwdriver35604110/** 1.0 10 3.4 / 2.5 or 5 None35604116/** 1.6 4 3.4 / 2.5 or 5 None35604120/** 2.0 3 3.4 / 2.5 or 5 None35604130/** 3.0 1 3.4 / 2.5 or 5 None35904110/** 1.0 10 3.4 / 2.5 or 5 Screwdriver35904116/** 1.6 4 3.4 / 2.5 or 5 Screwdriver35904120/** 2.0 3 3.4 / 2.5 or 5 Screwdriver35604188/** 1.0 10 2 / 2.5 or 5 None35904188/** 1.0 10 2 / 2.5 or 5 Screwdriver




Mounting:2 M3 x 5 deep fixing holes in base

Port Size:G1/8

Operating Pressure:



1.0, 1.6, 2.0 and 3.0 mm






Life Expectancy:


Weight:

160 g (without plug)

Materials:

Base: brassCoil: glass reinforced epoxycompound Armature: stainless ironStem tube: stainless steelSprings: stainless steelSeals: nitrile rubber (viton top seat)

2/2 Valves22mm G1/822mm G1/8


In line G 1/8 ported brass base

Normally closed models

Low power option

Memory-type manual override


To order, quote model number inserting voltage code foryour power requirement at ** from the table below

2/2 Normally Closed

**Voltage Codes


12V 7.5 CB 24V 50/60Hz 8 BB3.4 BB 2.5 CC2 EB 48V 50/60Hz 8 BE

24V 6 PC 2.5 CF3.4 BE 110/120V 50/60Hz 8 BF2 EC 2.5 CG

230V 50/60Hz 8 BJ5 PB


1.1.021.1.02/1/1Issue 2 LM/10/99in valve technologyThe Controlling force



AC Power Hold/Inrush 2.5/4, 8/12 VA (5/9 VA for 230V 50/60 Hz a.c. low power coils)







Manual Override Screwdriver - memory typeTurn 180° anti-clockwise to operate,turn clockwise to release


1.0 mm 0.026 0.029 29.01.6 mm 0.068 0.078 77.02.0 mm 0.100 0.115 113.03.0 mm 0.134 0.154 152.0


Please consult our Technical SalesDepartment for further information Viton (FPM) seal material (add prefix ‘V’ to

model number) Replacement coils 2 wire electrical flying leads Table B DIN 43650 electrical connections 30mm low power coils with Table A DIN

43650 electrical connections Zero power latching (impulse) coils Vacuum operation Non standard a.c. and d.c. voltages up to



44 CRS

56

11

31

64

2 Ports 1/8 BSP

22

15

M3 x 5 Deep Fixing Holes

10

22

30

Port 2 Port 1

37.5

73

Dimensions (mm)





Electrical Details





1.1.021.1.02/2/2




Mounting:Through-holes on 17mm centressupplied with 2 M3 x 20 fixing screws

Base/Port Size:Standard interface

Operating Pressure:



1.0, 1.6, and 2.0 mm






Life Expectancy:


Weight:

98 g (without plug)

Materials:


2/2 Valves22mm in22mm intterer facfacee


Standard interface base style

Low power option


Memory and non-memory type manualoverrides



2/2 Normally Closed

**Voltage Codes




230V 50/60Hz 8 BJ5 PB



2/2 Normally Closed33204110/** 1.0 12 6 or 7.5 / 8 None33204116/** 1.6 11 6 or 7.5 / 8 None33204120/** 2.0 10 6 or 7.5 / 8 None33304110/** 1.0 12 6 or 7.5 / 8 Screwdriver33304116/** 1.6 11 6 or 7.5 / 8 Screwdriver33304120/** 2.0 10 6 or 7.5 / 8 Screwdriver33D04110/** 1.0 12 6 or 7.5 / 8 PushButton33D04116/** 1.6 11 6 or 7.5 / 8 PushButton33D04120/** 2.0 10 6 or 7.5 / 8 PushButton35204110/** 1.0 10 3.4 / 2.5 or 5 None35204116/** 1.6 4 3.4 / 2.5 or 5 None35204120/** 2.0 3 3.4 / 2.5 or 5 None35304110/** 1.0 10 3.4 / 2.5 or 5 Screwdriver35304116/** 1.6 4 3.4 / 2.5 or 5 Screwdriver35304120/** 2.0 3 3.4 / 2.5 or 5 Screwdriver35D04110/** 1.0 10 3.4 / 2.5 or 5 PushButton35D04116/** 1.6 4 3.4 / 2.5 or 5 PushButton35D04120/** 2.0 3 3.4 / 2.5 or 5 PushButton35204188/** 1.0 10 2 / 2.5 or 5 None35304188/** 1.0 10 2 / 2.5 or 5 Screwdriver35D04188/** 1.0 10 2 / 2.5 or 5 PushButton











Manual Override Screwdriver - memory type(Turn 180° anti-clockwise to operate) Push button - non memory type


1.0 mm 0.026 0.029 29.01.6 mm 0.068 0.078 77.02.0 mm 0.100 0.115 113.0


Please consult our Technical SalesDepartment for further information Extended push button manual override Viton (FPM) seal material Zero power latching (impulse) coils 2 wire electrical flying leads Table B DIN 43650 electrical connections 30mm low power coils with Table A DIN

43650 electrical connections Vacuum operation Non standard a.c. and d.c. voltages up to

+ 30% tolerance Sub bases and manifolds up to 40 stations

- please refer to data sheet 1.1.04 (mani-fold mounted valves) or 6.1.01 ( individualsub bases/manifolds)

Connector plugs - please refer to datasheet 6.2.01 to order separately

44 CRS

535.

6

M3 x 20mmfixing screws

11

31

64

37.5

70

17

22

17

Port 1 Area

Port 2 Area

22

22

Dimensions (mm)





Electrical Details





1.1.031.1.03/2/2


2/2 Normally Closed810861##/33204110/** 1.0 12 6 or 7.5/8 None810861##/33204116/** 1.6 11 6 or 7.5/8 None810861##/33204120/** 2.0 10 6 or 7.5/8 None810861##/33304110/** 1.0 12 6 or 7.5/8 Screwdriver810861##/33304116/** 1.6 11 6 or 7.5/8 Screwdriver810861##/33304120/** 2.0 10 6 or 7.5/8 Screwdriver810861##/33D04110/** 1.0 12 6 or 7.5/8 PushButton810861##/33D04116/** 1.6 11 6 or 7.5/8 PushButton810861##/33D04120/** 2.0 10 6 or 7.5/8 PushButton810861##/35204110/** 1.0 10 3.4/2.5 or 5 None810861##/35204116/** 1.6 4 3.4/2.5 or 5 None810861##/35204120/** 2.0 3 3.4/2.5 or 5 None810861##/35304110/** 1.0 10 3.4/2.5 or 5 Screwdriver810861##/35304116/** 1.6 4 3.4/2.5 or 5 Screwdriver810861##/35304120/** 2.0 3 3.4/2.5 or 5 Screwdriver810861##/35D04110/** 1.0 10 3.4/2.5 or 5 PushButton810861##/35D04116/** 1.6 4 3.4/2.5 or 5 PushButton810861##/35D04120/** 2.0 3 3.4/2.5 or 5 PushButton810861##/35204188/** 1.0 10 2/2.5 or 5 None810861##/35304188/** 1.0 10 2/2.5 or 5 Screwdriver810861##/35D04188/** 1.0 10 2/2.5 or 5 PushButton




Mounting:M4 threaded holes in manifold oncentres as shown overleaf

Port Size:G1/8

Operating Pressure:



1.0, 1.6, and 2.0 mm




-20°C* to +90°C supply-20°C* to +50°C ambient* Consult Technical Service for use below +2°C

Life Expectancy:



N x 130 g (N = number of stations)

Materials:

Valve base: moulded plasticCoil: glass reinforced epoxy compoundManifold: anodised aluminiumArmature: stainless ironStem tube: stainless steelSprings: stainless steelSeals: nitrile rubber (viton top seat)





Low power option



To order, quote model number, inserting number of stations required at ## (01 to 40), followed by the voltagecode for your power requirement at** from the table below

2/2 Normally Closed

**Voltage Codes




230V 50/60Hz 8 BJ5 PB














1.0 mm 0.026 0.029 29.01.6 mm 0.068 0.078 77.02.0 mm 0.100 0.115 113.0


Please consult our Technical SalesDepartment for further information Extended push button manual override Viton (FPM) seal material - add prefix ‘V’ to

model number Zero power latching (impulse) coils 2 wire electrical flying leads Table B DIN 43650 electrical connections Vacuum operation Non standard a.c. and d.c. voltages up to

+ 30% tolerance Individual sub bases and manifolds -

please refer to data sheet 6.1.01 Individual 22mm interface valves -

please refer to data sheet 1.1.03 Connector plugs - please refer to data

sheet 6.2.01 to order separately17.2

32.6

67

87 53

12

All Ports 1/8 BSP

70

24

8.5M4 Fixing Holes

25

Dimension A (See Table)

Dimensions (mm)





Electrical Details





1.1.041.1.04/2/2

Manifold Dimension A

Single station 24Multiple stations 25 x (N-1) + 24

N = number of stations




Mounting:Two 2.48 x 8 deep holes in base tosuit No 4 self tapping screws

Port Size:Hosetail- to suit 6 mm I/D flexibletubing

Operating Pressure:



2.0 mm


113 l/min.See Flow Characteristics table overleaf for individual details



Life Expectancy:


Weight:

93 g (without plug)

Materials:


2/2 Valves22mm hosetail22mm hosetail


In line hosetail connections to suit6mm I/D flexibe tubing

Low power option




2/2 Normally Closed

**Voltage Codes


12V 7.5 CB 24V 50/60Hz 8 BB3.4 BB 2.5 CC

24V 6 PC 48V 50/60Hz 8 BE3.4 BE 2.5 CF

110/120V 50/60Hz 8 BF2.5 CG

230V 50/60Hz 8 BJ5 PB



2/2 Normally Closed33804120/** 2.0 10 6 or 7.5 / 8 None35804120/** 2.0 3 3.4 / 2.5 or 5 None



DC Power 3.4, 7.5 W (6 W for 24V d.c. high power coils)












43650 electrical connections Vacuum operation Zero power latching (impulse) valves Non standard a.c. and d.c. voltages up to



44 CRS

11

31

64

22

15

2 Holes to suit No 4Plasform Screws

22

Port 2 Port 1

22

542 Ports Ø 3.0

54

6.5

10

37.5

71




2.0 mm 0.100 0.115 113.0



Electrical Details





1.1.051.1.05/2/2




Mounting:4 M4 threaded holes on 24mmcentres

Port Size:G1/8

Operating Pressure:



1.0, 1.5, 2.0, and 2.5 mm


34 to186 l/min.See Flow Characteristics table overleaf for individual details



Life Expectancy:


Weight:


Materials:

Base: zinc alloy to BS 1008(epoxypowder coated)Coil: glass reinforced nylonArmature: stainless ironStem tube: stainless steelSprings: stainless steelSeals: nitrile rubber (viton top seat)

2/2 Valves32 mm G1/832 mm G1/8

32mm compact solenoid valves

In line G 1/8 ported base

Pressure rating up to 16 barg

Extensive range of power and orificesize options




2/2 Normally ClosedXL51020300/** 2.5 16 9/20 NoneXL51021300/** 2.5 16 9/20 ScrewdriverXL31020100/** 1.5 16 4.5/10 NoneXL31021100/** 1.5 16 4.5/10 ScrewdriverXL31020200/** 2.0 16 4.5/10 NoneXL31021200/** 2.0 16 4.5/10 ScrewdriverXL31020300/** 2.5 10 4.5/10 NoneXL31021300/** 2.5 10 4.5/10 ScrewdriverXL11020000/** 1.0 10 1 NoneXL11021000/** 1.0 10 1 Screwdriver

2/2 Normally Closed

To order, quote model number, inserting voltage code foryour power requirement at ** from the table below


12V 4.5, 9 16 24V 50/60Hz 10, 20 8124V 1, 4.5, 9 10 48V 50/60Hz 10, 20 168

110/120V 50/60Hz 10, 20 131230V 50/60Hz 10, 20 137

**Voltage Codes

Note: 1 W coils are only available in 24V DCOther voltages available on request



1.0 mm 0.030 0.034 34.01.5 mm 0.064 0.074 72.02.0 mm 0.107 0.123 121.02.5 mm 0.164 0.189 186.0


Please consult our Technical SalesDepartment for further information Lever manual overrides Viton (FPM) seal material Replacement coils Vacuum operation Non standard a.c. and d.c. voltages up to



63

41 CRS

16

40

2 Ports1/8 BSP

24

69

32

24

M4 Mounting Holes

83

41

32

Dimensions (mm)






DC Power 1, 4.5, 9 WAC Power Hold/Inrush 10/14, 20/27 VA





Electrical Connections 3 pin (DIN 43 650 Form A)



Electrical Details





1.2.011.2.01/2/2




Mounting:2 M4 threaded holes in base on12.7mm fixing centres

Port Size:G1/4

Operating Pressure:



2.0, 2.5, 3.0, 4.0, 4.5 and 6.3 mm





Life Expectancy:

Typically in excess of 20 millioncycles

Weight:


Materials:

Base: brassCoil: glass reinforced nylonArmature: stainless ironStem tube: stainless steelSprings: stainless steelSeals: nitrile rubber (viton top seat)





High flow





2/2 Normally ClosedXL51033300/** 2.5 16 9/20 LeverXL51030300/** 2.5 16 9/20 NoneXL51033400/** 3.0 13 9/20 LeverXL51030400/** 3.0 13 9/20 NoneXL51033500/** 4.0 5 9/20 LeverXL51030500/** 4.0 5 9/20 NoneXL51033600/** 4.5 3 9/20 LeverXL51030600/** 4.5 3 9/20 NoneXL51030700/** 6.3 1 9/20 NoneXL31033200/** 2.0 16 4.5/10 LeverXL31030200/** 2.0 16 4.5/10 NoneXL31033300/** 2.5 10 4.5/10 LeverXL31030300/** 2.5 10 4.5/10 NoneXL31033400/** 3.0 7 4.5/10 LeverXL31030400/** 3.0 7 4.5/10 NoneXL31033500/** 4.0 2.5 4.5/10 LeverXL31030500/** 4.0 2.5 4.5/10 NoneXL31033600/** 4.5 1.5 4.5/10 LeverXL31030600/** 4.5 1.5 4.5/10 NoneXL31030700/** 6.3 0.5 4.5/10 None

2/2 Normally Closed



12V 4.5, 9 16 24V 50/60Hz 10, 20 8124V 4.5, 9 10 48V 50/60Hz 10, 20 168

110/120V 50/60Hz 10, 20 131230V 50/60Hz 10, 20 137

**Voltage Codes




2.0 mm 0.107 0.123 121.02.5 mm 0.164 0.189 186.03.0 mm 0.200 0.230 227.04.0 mm 0.350 0.410 -4.5 mm 0.430 0.500 -6.3 mm 0.760 0.870 -


Please consult our Technical SalesDepartment for further information Viton (FPM) seal material Replacement coils Vacuum operation Non standard a.c. and d.c. voltages up to



41 CRS

72

73

442 Ports1/4 BSP

36

12.7

12.7

32

2 M4 Mounting Holes

50

32

92

41

Dimensions (mm)



* l/min calculation tested at 6 barg in, 5 barg outPlease consult our Technical Service for l/min flow figuresfor 4mm, 4.5mm and 6.3mm orifice valves



DC Power 4.5, 9 WAC Power Hold/Inrush 10/14, 20/27 VA







Manual Override Lever - memory typeTurn to operate

Electrical Details





1.2.021.2.02/2/2





Base:Standard interface base

Operating Pressure:

0 to16 barg (maximum)


1.0, 1.5, 2.0, and 2.5 mm






Life Expectancy:

Typically in excess of 20 million cyclesWeight:


Materials:

Base: polyesterCoil: glass reinforced nylonArmature: stainless ironStem tube: stainless steelSprings: stainless steelSeals: nitrile rubber (viton top seat)

2/2 Valves32 mm in32 mm intterer facfacee


Standard interface base for manifoldmounting







2/2 Normally ClosedXL51010300/** 2.5 16 9/20 NoneXL51011300/** 2.5 16 9/20 ScrewdriverXL31010100/** 1.5 16 4.5/10 NoneXL31011100/** 1.5 16 4.5/10 ScrewdriverXL31010200/** 2.0 16 4.5/10 NoneXL31011200/** 2.0 16 4.5/10 ScrewdriverXL31010300/** 2.5 10 4.5/10 NoneXL31011300/** 2.5 10 4.5/10 ScrewdriverXL11010000/** 1.0 10 1 NoneXL11011000/** 1.0 10 1 Screwdriver

2/2 Normally Closed


12V 4.5, 9 16 24V 50/60Hz 10, 20 8124V 1, 4.5, 9 10 48V 50/60Hz 10, 20 168

110/120V 50/60Hz 10, 20 131230V 50/60Hz 10, 20 137

**Voltage Codes













1.0 mm 0.021 0.024 24.01.5 mm 0.045 0.051 50.02.0 mm 0.085 0.098 96.02.5 mm 0.111 0.128 126.0


Please consult our Technical SalesDepartment for further information Lever manual override Viton (FPM) seal material Replacement coils Vacuum operation Non standard a.c. and d.c. voltages up to


- please refer to data sheet 1.2.04 (mani-fold mounted valves) or 6.1.01 (individualsub bases/manifolds)


41 CRS

599

16

40

69

32

7Port 1

24

242 M4 x 25 Fixing Screws

41

78

32

Port 2

Electrical Details

Dimensions (mm)









1.2.031.2.03/2/2




Mounting:M5 x 0.8 threaded holes in manifoldon centres as shown overleaf

Port Size:G 1/8

Operating Pressure:



1.0, 1.5, 2.0, and 2.5 mm





Life Expectancy:




Materials:

Interface base: polyesterManifold: anodised aluminiumCoil: glass reinforced nylon Armature: stainless ironStem tube: stainless steelSprings: stainless steelSeals: nitrile rubber (viton top seat)








To order, quote model number, inserting number of stations required at ## (01 to 30), followed by the voltagecode for your power requirement from the table below


2/2 Normally Closed679867##/XL51010300/** 2.5 16 9/20 None679867##/XL51011300/** 2.5 16 9/20 Screwdriver679867##/XL31010100/** 1.5 16 4.5/10 None679867##/XL31011100/** 1.5 16 4.5/10 Screwdriver679867##/XL31010200/** 2.0 16 4.5/10 None679867##/XL31011200/** 2.0 16 4.5/10 Screwdriver679867##/XL31010300/** 2.5 10 4.5/10 None679867##/XL31011300/** 2.5 10 4.5/10 Screwdriver679867##/XL11010000/** 1.0 10 1 None679867##/XL11011000/** 1.0 10 1 Screwdriver

2/2 Normally Closed


12V 4.5, 9 16 24V 50/60Hz 10, 20 8124V 1, 4.5, 9 10 48V 50/60Hz 10, 20 168

110/120V 50/60Hz 10, 20 131230V 50/60Hz 10, 20 137

**Voltage Codes


1.2.04/11.2.04/1Issue 2 LM/8/99in valve technologyThe Controlling force




1.0 mm 0.021 0.024 24.01.5 mm 0.045 0.051 50.02.0 mm 0.085 0.098 96.02.5 mm 0.111 0.128 126.0



+ 30% tolerance Individual sub bases and manifolds

- please refer to data sheet 6.1.01 Individual 32mm interface valves

- please refer to data sheet 1.2.03 Connector plugs - please refer to data


12

24

M5 Fixing Holes

17.2

32.6

70

95

33

76

16


All Ports 1/8 BSP

Dimensions (mm)














Electrical Details





1.2.041.2.04/2/2



24V 12 A 24V 50 Hz 16 C205V 12 B 110V 50 Hz 16 D

230V 50 Hz 16 E

120V 60 Hz 16 F220V 60 Hz 16 G


Medium:Compressed air, filtered, lubricatedand non-lubricatedLight oil and water

Operation:Solenoid actuated with forced lifting

Mounting:M5 threaded mounting holesPosition optional, preferably upright

Port Sizes:G1/4, G3/8, G1/2

Operating Pressure:

0 to 10 barg (0 to 20 barg for ACsolenoid and NBR seal material)


10 mm


25 to 28 l/min. (water)See Flow Characteristics table overleaf for individual details



Life Expectancy:

Typically in excess of 250,000 cycles

Weight:

500 g (G1/4 and G3/8 models)600 g (G1/2 model)

Materials:

Body: brass PA 66 Coil: epoxy resin (duroplast),encapsulated insulation class FArmature: stainless steelStem tube: stainless steelSprings: stainless steelSeals: NBR (Perbunan)

2/2 Valves35mm G1/4,35mm G1/4, G3/8,G3/8, G1/2 (fG1/2 (fororcced lifed lif t)t)

35mm compact solenoid with integral armature assembly

In line G 1/4, G 3/8 and G 1/2 ported base

Up to 20 barg (AC solenoids only)

Forced lifting action for high flow

Suitable for steam and hot water (see options overleaf)


Model Number Port Orifice Pressure PowerSize (mm) (barg) (W/VA)

2/2 Normally Closed - Up to 10 bar (AC and DC Voltages)82 530 00.8000* G 1/4 10.0 10 12/1682 531 00.8000* G 3/8 10.0 10 12/1682 532 00.8000* G 1/2 10.0 10 12/162/2 Normally Closed - Up to 20 bar (AC Voltages only)**82 530 22.8000* G 1/4 10.0 20 16 VA82 531 22.8000* G 3/8 10.0 20 16 VA82 532 22.8000* G 1/2 10.0 20 16 VA

To order, quote model number, inserting voltage code foryour power requirement at * from the table below


*Voltage Codes

2/2 Normally Closed

a

P

Ab

a b

**0 to 20 barg for AC solenoid and NBR seal material

Port Size (R) Orifice L H H1 B SW T

G 1/4 10 mm 44 85.5 73 12.5 21 12G 3/8 10 mm 44 85.5 73 12.5 21 12G 1/2 10 mm 60 79.5 12.5 12.5 27 15

Please consult our Technical SalesDepartment for further information FKM seat seal max fluid temperature

+110°CChange 6th and 7th digit to 03 e.g.82 530 03.8000

EPDM seat seal for hot water, max fluidtemperature +110°C Change 6th and 7th digit to 14 e.g.82 530 14.8000

Degreased version, seat seal FKMChange 6th and 7th digit to 18 e.g.82 530 18.8000

HNBR seat seal for hot water and steam,max fluid temperature +150°C, operatingpressure 0 to 6 bar Change 6th and 7th digit to 51 e.g.82 530 51.8000

NPT threads (NPT 1/4, 3/8 & 1/2)Change 3rd digit to 6 e.g.82 630 00.8000 (NPT 1/4)82 631 00.8000 (NPT 3/8)82 632 00.8000 (NPT 1/2)

Connector plugs - please refer to datasheet 6.2.01 to order separately (ModelPCC 40110)

SW

Pg 9

69,5

20,5

ca. 4

0

1816

34

Port Size Kv m3/h NFPA Cv l/min

G 1/4 1.50 1.73 1720G 3/8 1.70 1.96 1960G 1/2 1.70 1.96 1960

2/2 Valves35mm G1/4,35mm G1/4, G3/8,G3/8, G1/2 (fG1/2 (fororcced lifed lif t)t)

Dimensions (mm)




DC Power 12 WAC Power Hold/Inrush 16/20 VA

Typical Electrical Air: On 35 ms Off 100 msResponse Time Water: On 60 ms Off 150 ms



Coil 35mm encapsulated


Connector Plug Supplied without plug.Refer to data sheet 6.2.01 to order separately. (Model PCC 40110)


Electrical Details

Port Size Kv m3/h NFPA Cv l/min

G 1/4 1.50 1.73 25.00G 3/8 1.70 1.96 28.30G 1/2 1.70 1.96 28.30

Flow Characteristics - Water*

Connector plug shownfor installation purposesonly

H

B

R

L

T

35

17,5

H1

P A

FLOW

OutletInlet





1.3.011.3.01/2/2

3/2 NC

15 mm

22 mm

Interface (M5)Manifold

mountable0.75 0 - 10

2.1.012.1.012.1.022.1.02

3/2 NC M5 Body ported 1.0, 2.0 0 - 10 2.2.012.2.01

22 mm

3/2 NC G 1/8 Body ported1.0, 1.62.0, 3.0

0 - 12

2.2.022.2.02

22 mm

3/2 NCInterface

(G1/8)Manifold

mountable0.8, 1.01.6, 2.0

0 - 122.2.032.2.032.2.042.2.04

22 mm 3/2 NC HosetailSpigots to suit

6 mm I/D tubing

2.0 0 - 7 2.2.052.2.05

30 mm 3/2 NC CNOMO Pilot valve 1.0, 1.6 0 - 16 2.2.062.2.06


Seri

es

Mo

del

Fun

ctio

n

Po

rt C

on

nec

tio

ns

Typ

e

Ori

fice

(mm

)

Pre

ssu

re (b

arg

)

Dat

a Sh

eet

3/2 NO Interface (M5)Manifold

mountable1.0 0 - 6

3/2 NO G 1/8 Body ported 1.0, 1.6 0 - 10

3/2 NO Interface Interface 1.0, 1.6 0 - 12

Continued overleaf


2.2.032.2.03


3/2 NC

32 mm

32 mm

G 1/8 Body ported1.0, 1.52.0, 2.5

0 - 162.3.012.3.01

3/2 NC G 1/4 Body ported1.5, 2.0

2.50 - 16 2.3.022.3.02

32 mm

3/2 NCInterface

(G1/8)Manifold

mountable1.0, 1.52.0, 2.5

0 - 16 2.3.032.3.032.3.042.3.04

32 mmBase

ported

3/2 NCInterface

(G1/4)Manifold

mountable1.5, 2.0

2.80 - 14

2.4.012.4.012.4.022.4.02

Seri

es

Mo

del

Fun

ctio

n

Po

rt C

on

nec

tio

ns

Typ

e

Ori

fice

(mm

)

Pre

ssu

re (b

arg

)

Dat

a Sh

eet

3/2 NO G 1/8 Body ported1.0, 1.52.0, 2.5

0 - 16

3/2 NO Interface Interface1.0, 1.52.0, 2.5

0 - 16

3/2 NOInterface

(G1/4)Manifold

mountable1.5, 2.0 0 - 14


2.3.032.3.03


Medium:Compressed air, filtered, lubricatedand non-lubricated


Mounting:Through-holes in base on 9.7mm fix-ing centres, supplied with 2 M3 x18mm fixing screws

Base/Port Size:Standard interface basePort Size 1.3mm

Operating Pressure:


Inlet Orifice Size:

0.75, 1.0 mm





Life Expectancy:



30 g

Materials:Base: acetalCoil: thermoplastic nylonArmature: stainless ironStem tube: stainless steelSprings: stainless steelSeals: nitrile rubber

**Voltage Codes


Compact, 15mm micro solenoid valves

Piped exhaust designed for manifoldmounting

Low power consumption

Push button manual override


To order, quote model number, inserting voltage code at **from the table below

DC Supply Power (W) Code

12V 1.5 CB

24V 1.5 CC

3/2 Normally Open

3/2 Normally Closed

* 3/2 normally closed valve can be configured for 2/2 normally closed and 2/2normally open operation - please contact Technical Sales for further information

Model Number Orifice Pressure Power Manual(mm) (barg) (W) Override

3/2 Normally Closed*90204910/** 0.75 10 1.5 None90304910/** 0.75 10 1.5 PushButton3/2 Normally Open90205910/** 1.0 6 1.5 NoneOn request 1.0 6 1.5 PushButton



DC Power 1.5 W

Typical Electrical On 5 -15 msResponse Time




Electrical Connections 3 flat pin

Connector Plug Supplied without plug.Refer to data sheet 6.2.01 to order

Manual Override Push button - non memory typePush to operate


0.75 mm 0.014 0.016 16.01.0 mm 0.026 0.029 29.0

3/2 Valves15mm15mm inintterer facfacee

Please consult our Technical SalesDepartment for further information 2/2 normally closed models 2/2 normally open models Sub bases and manifold mounted models -


Vacuum operation Connector plugs - please refer to data


Electrical Details

Dimensions (mm)





44

15.45

M3 x 18Fixing Screws

Port 29.65

Port 1

Port 3

1.3

3.8

3.8

15

29 CRS

18.3

46





2.1.012.1.01/2/2





Port Size:M5 (All 3 ports)

Operating Pressure:


Inlet Orifice Size:

0.75, 1.0 mm






Life Expectancy:




Materials:Base: acetalManifold: anodised aluminiumCoil: thermoplastic nylonArmature: stainless ironStem tube: stainless steelSprings: stainless steelSeals: nitrile rubber

3/2 Valves15mm manif15mm manifold mounold mountted M5ed M5

Compact, 15mm micro solenoid valves

1 to 8 station sub-base and manifoldsystems

Collected exhaust ideal for clean roomapplications

Low power consumption

Push button manual override



3/2 Normally Open

3/2 Normally Closed

* 3/2 normally closed valve can be configured for 2/2 normally closed and 2/2normally open operation - please contact Technical Sales for further information

**Voltage Codes

DC Supply Power (W) Code

12V 1.5 CB

24V 1.5 CC

Model Number Orifice Pressure Power Manual(mm) (barg) (W) Override

3/2 Normally Closed*900186##/90204910/** 0.75 10 1.5 None900186##/90304910/** 0.75 10 1.5 PushButton3/2 Normally Open900186##/90205910/** 1.0 6 1.5 NoneOn request 1.0 6 1.5 PushButton





DC Power 1.5 W

Typical Electrical On 5 -15 msResponse Time




Electrical Connections 3 flat pin

Connector Plug Supplied without plug.Refer to data sheet 6.2.01 to order

Manual Override Push button - non memory typePush to operate

3/2 Valves15mm15mm manifmanifold mounold mountted M5ed M5



60

M5 ExhaustPort

M5 InletPort

48

178


M5 Outlet Port


0.75 mm 0.014 0.016 16.01.0 mm 0.026 0.029 29.0

Electrical Details Flow Characteristics - Air*


Please consult our Technical SalesDepartment for further information 2/2 normally closed models 2/2 normally open models Individual sub bases/manifolds








2.1.022.1.02/2/2



3/2 Normally Closed†VWD4M1D1-A12*J 1.0 10 6 or 7.5 / 8 NoneVWD4M1H1-A12*J 2.0 7 6 or 7.5 / 8 NoneVWD4M1D1-A19*J 1.0 10 3.4 / 5 NoneVWD4M1H1-A19*J 2.0 3 3.4 / 5 NoneVWD4M1D1-A11*J 1.0 7 2 / 2.5 or 5 None




Mounting:Two holes in base to suit No 4 selftapping screws

Port Size:M5 (All 3 ports)

Operating Pressure:



1.0, and 2.0 mm






Life Expectancy:


Weight:

95 g (without plug)

Materials:




In line M5 ported base

Low power option

Lightweight plastic moulded base

Diffuser supplied with 3/2 normallyclosed models



3/2 Normally Closed

*Voltage Codes


12V 7.5 2 24V 50/60Hz 8 43.4 2 2.5 42 2 48V 50/60Hz 8 6

24V 6 3 2.5 63.4 3 110/120V 50/60Hz 8 82 3 2.5 8

230V 50/60Hz 8 95 9



†3/2 normally open models also available - please contact Technical Sales fordetails



AC Power Hold/Inrush 2.5/4, 5/9, 8/12 VA (5/9 VA for 230V 50/60 Hz a.c. low power coils)









1.0 mm 0.026 0.029 29.02.0 mm 0.100 0.115 113.0


Please consult our Technical SalesDepartment for further information normally open models Viton (FPM) seal material 2 wire electrical flying leads Table B DIN 43650 electrical connections 30mm low power coils with Table A DIN




44 CRS

Port 3

58

2 PortsThreaded M5

6.5

11

31

64

26

Port 2 Port 1

22

71

37.5

22

10

15

2 Holes to Suit No.4Self Tapping Screws

Dimensions (mm)





Electrical Details





2.2.012.2.01/2/2


3/2 Normally Closed31604110/** 1.0 12 6 or 7.5 / 8 None31604716/** 1.6 10 6 or 7.5 / 8 None31604720/** 2.0 7 6 or 7.5 / 8 None31604730/** 3.0 3 6 or 7.5 / 8 None31904110/** 1.0 12 6 or 7.5 / 8 Screwdriver31904716/** 1.6 10 6 or 7.5 / 8 Screwdriver31904720/** 2.0 7 6 or 7.5 / 8 Screwdriver34604110/** 1.0 10 3.4 / 2.5 or 5 None34604716/** 1.6 3 3.4 / 2.5 or 5 None34604720/** 2.0 3 3.4 / 2.5 or 5 None34604730/** 3.0 1 3.4 / 2.5 or 5 None34904110/** 1.0 10 3.4 / 2.5 or 5 Screwdriver34904716/** 1.6 3 3.4 / 2.5 or 5 Screwdriver34904720/** 2.0 3 3.4 / 2.5 or 5 Screwdriver34604188/** 1.0 10 2 / 2.5 or 5 None34904188/** 1.0 10 2 / 2.5 or 5 Screwdriver3/2 Normally Open31605516/** 1.6 10 6 or 7.5 / 8 None31905516/** 1.6 10 6 or 7.5 / 8 Screwdriver34605010/** 1.0 10 3.4 / 2.5 or 5 None34905010/** 1.0 10 3.4 / 2.5 or 5 Screwdriver




Mounting:2 M3 x 5 deep fixing holes in base

Port Size:G1/8 (Exhaust Port M5)

Operating Pressure:



1.0, 1.6, 2.0 and 3.0 mm






Life Expectancy:


Weight:


Materials:

Base: brassCoil: glass reinforced epoxy compound Armature: stainless ironStem tube: stainless steelSprings: stainless steelSeals: nitrile rubber (viton top seat)

**Voltage Codes



In line G 1/8 ported brass base

Low power option





3/2 Normally Open

3/2 Normally Closed




230V 50/60Hz 8 BJ5 PB














1.0 mm 0.026 0.029 29.01.6 mm 0.068 0.078 77.02.0 mm 0.100 0.115 113.03.0 mm 0.134 0.154 -



model number) 2 wire electrical flying leads Table B DIN 43650 electrical connections 30mm low power coils with Table A DIN




44 CRS

Port 3

60

2 Ports1/8 BSP

11

31

64

22

10

15

M3 x 5 Deep Fixing Holes

37.5

73

22

Port 2 Port 1

30

Dimensions (mm)





Electrical Details





2.2.022.2.02/2/2


3/2 Normally Closed31204110/** 1.0 12 6 or 7.5 / 8 None31204716/** 1.6 10 6 or 7.5 / 8 None31204720/** 2.0 7 6 or 7.5 / 8 None31304110/** 1.0 12 6 or 7.5 / 8 Screwdriver31304716/** 1.6 10 6 or 7.5 / 8 Screwdriver31304720/** 2.0 7 6 or 7.5 / 8 Screwdriver31D04110/** 1.0 12 6 or 7.5 / 8 PushButton31D04716/** 1.6 10 6 or 7.5 / 8 PushButton31D04720/** 2.0 7 6 or 7.5 / 8 PushButton34204110/** 1.0 10 3.4 / 2.5 or 5 None34204716/** 1.6 3 3.4 / 2.5 or 5 None34204720/** 2.0 3 3.4 / 2.5 or 5 None34304110/** 1.0 10 3.4 / 2.5 or 5 Screwdriver34304716/** 1.6 3 3.4 / 2.5 or 5 Screwdriver34304720/** 2.0 3 3.4 / 2.5 or 5 Screwdriver34D04110/** 1.0 10 3.4 / 2.5 or 5 PushButton34D04716/** 1.6 3 3.4 / 2.5 or 5 PushButton34D04720/** 2.0 3 3.4 / 2.5 or 5 PushButton34204188/** 1.0 10 2 / 2.5 or 5 None34304188/** 1.0 10 2 / 2.5 or 5 Screwdriver34D04188/** 1.0 10 2 / 2.5 or 5 PushButtonVWD4Q1C1-A18*J 0.8 8 0.8 NoneVWD4Q1C1-A68*J 0.8 8 0.8 ScrewdriverVWD4Q1C1-A38*J 0.8 8 0.8 PushButton3/2 Normally Open34205010/** 1.0 12 3.4 / 2.5 or 5 None34305010/** 1.0 12 3.4 / 2.5 or 5 Screwdriver34D05010/** 1.0 12 3.4 / 2.5 or 5 PushButton31205516/** 1.6 11 6 or 7.5 / 8 None31305516/** 1.6 11 6 or 7.5 / 8 Screwdriver31D05516/** 1.6 11 6 or 7.5 / 8 PushButton





Base/Port Size:Standard interface (Exhaust Port M5)

Operating Pressure:



0.8,1.0, 1.6 and 2.0 mm





Life Expectancy:


Weight:

98 g (without plug)

Materials:




Standard interface base style

0.8 watt low power option




To order, quote model number inserting voltage code foryour power requirement at ** from the table overleaf

3/2 Normally Open

3/2 Normally Closed



DC Power 0.8, 2, 3.4, 7.5 W (6 W for 24V d.c. high power coils)









AC Supply Power Code(50/60 Hz) (VA)

24V 8 BB2.5 CC

48V 8 BE2.5 CF

110/120V 8 BF2.5 CG

230V 8 BJ5 PB


0.8 mm 0.014 0.016 16.01.0 mm 0.026 0.029 29.01.6 mm 0.068 0.078 77.02.0 mm 0.100 0.115 113.0


Please consult our Technical SalesDepartment for further information Extended push button manual override Viton (FPM) seal material 2 wire electrical flying leads Table B DIN 43650 electrical connections 30mm low power coils with Table A DIN



- please refer to data sheet 2.2.04 (manifoldmounted valves) or 6.1.01 (individual subbases/manifolds)

Connector plugs - please refer to data sheet6.2.01 to order separately

57

115.6

31

64

Port 3

44 CRS

37.5

70

22

22

22

17

17

M3 x 20mmFixing Screws

Port 1 Area

Port 2 Area

Dimensions (mm)





**Voltage CodesElectrical Details

DC Power Code(W)

12V 7.5 CB3.4 BB2 EB0.8 2

24V 6 PC3.4 BE2 EC0.8 3


Please refer to Webber Technical InformationSheet 1 (Section 8 of Product Catalogue) forporting configuration details.




2.2.032.2.03/2/2





Port Size:G1/8 (Exhaust Port M5)

Operating Pressure:



1.0, 1.6 and 2.0 mm





Life Expectancy:




Materials:

Valve base: moulded plasticCoil: glass reinforced epoxy compoundManifold: anodised aluminiumArmature: stainless ironStem tube: stainless steelSprings: stainless steelSeals: nitrile rubber (viton top seat)





Low power option


Diffuser supplied



3/2 Normally Closed

**Voltage Codes




230V 50/60Hz 8 BJ5 PB



3/2 Normally Closed810861##/31204110/** 1.0 12 6 or 7.5/8 None810861##/31204716/** 1.6 10 6 or 7.5/8 None810861##/31204720/** 2.0 7 6 or 7.5/8 None810861##/31304110/** 1.0 12 6 or 7.5/8 Screwdriver810861##/31304716/** 1.6 10 6 or 7.5/8 Screwdriver810861##/31304720/** 2.0 7 6 or 7.5/8 Screwdriver810861##/31D04110/** 1.0 12 6 or 7.5/8 PushButton810861##/31D04716/** 1.6 10 6 or 7.5/8 PushButton810861##/31D04720/** 2.0 7 6 or 7.5/8 PushButton810861##/34204110/** 1.0 10 3.4/2.5 or 5 None810861##/34204716/** 1.6 3 3.4/2.5 or 5 None810861##/34204720/** 2.0 3 3.4/2.5 or 5 None810861##/34304110/** 1.0 10 3.4/2.5 or 5 Screwdriver810861##/34304716/** 1.6 3 3.4/2.5 or 5 Screwdriver810861##/34304720/** 2.0 3 3.4/2.5 or 5 Screwdriver810861##/34D04110/** 1.0 10 3.4/2.5 or 5 PushButton810861##/34D04716/** 1.6 3 3.4/2.5 or 5 PushButton810861##/34D04720/** 2.0 3 3.4/2.5 or 5 PushButton810861##/34204188/** 1.0 10 2/2.5 or 5 None810861##/34304188/** 1.0 10 2/2.5 or 5 Screwdriver810861##/34D04188/** 1.0 10 2/2.5 or 5 PushButton













1.0 mm 0.026 0.029 29.01.6 mm 0.068 0.078 77.02.0 mm 0.100 0.115 113.0


Please consult our Technical SalesDepartment for further information Extended push button manual override Viton (FPM) seal material - add prefix ‘V’ to

model number 2 wire electrical flying leads Table B DIN 43650 electrical connections Vacuum operation Non standard a.c. and d.c. voltages up to

+ 30% tolerance Individual sub bases and manifolds




17.2

32.6

67

87 57

25

12

All Ports 1/8 BSP

74

8.5M4 Fixing Holes

24


Dimensions (mm)





Electrical Details





2.2.042.2.04/2/2







Mounting:Two 2.48 x 8 deep holes in base tosuit No 4 self tapping screws

Port Size:Hosetail- to suit 6 mm I/D flexibletubing (Exhaust Port M5)

Operating Pressure:


Inlet Orifice Size:

2.0 mm


113 l/min.See Flow Characteristics table overleaf for individual details



Life Expectancy:


Weight:

93 g (without plug)

Materials:




In line hosetail connections to suit6mm I/D flexibe tubing

Low power option


Diffuser supplied



3/2 Normally Closed

**Voltage Codes


12V 7.5 CB 24V 50/60Hz 8 BB3.4 BB 2.5 CC

24V 6 PC 48V 50/60Hz 8 BE3.4 BE 2.5 CF

110/120V 50/60Hz 8 BF2.5 CG

230V 50/60Hz 8 BJ5 PB



3/2 Normally Closed31804720/** 2.0 7 6 or 7.5 / 8 None34804720/** 2.0 3 3.4 / 2.5 or 5 None



DC Power 3.4, 7.5 W (6 W for 24V d.c. high power coils)










2.0 mm 0.100 0.115 113.0







44 CRS

Port 3

58

6.5

11

31

64

22

15

10

2 Holes to Suit No 4 Plasform Screws

Port 2

71

37.5

22

Port 1

2 PortsØ 3.0

22

54

Dimensions (mm)





Electrical Details





2.2.052.2.05/2/2


3/2 Normally Closed - Fitted with 22mm coils†VWE4L4G1-A32*J 1.6 10 6 or 7.5 / 8 PushButtonVWE4L4G1-A62*J 1.6 10 6 or 7.5 / 8 ScrewdriverVWE4L4D1-A32*J 1.0 16 6 or 7.5 / 8 PushButtonVWE4L4D1-A62*J 1.0 16 6 or 7.5 / 8 ScrewdriverVWE4L4D1-A31*J 1.0 10 2 / 2.5 or 5 PushButtonVWE4L4D1-A61*J 1.0 10 2 / 2.5 or 5 Screwdriver3/2 Normally Closed - Fitted with 30mm coils†

VWE4L4G1-A33*N 1.6 16 7.5 d.c. only PushButtonVWE4L4G1-A63*N 1.6 16 7.5 d.c. only ScrewdriverVWE4L4G1-A32*N 1.6 10 4 / 8 PushButtonVWE4L4G1-A62*N 1.6 10 4 / 8 ScrewdriverVWE4L4D1-A32*N 1.0 16 4 / 8 PushButtonVWE4L4D1-A62*N 1.0 16 4 / 8 ScrewdriverVWE4L4D1-A31*N 1.0 10 1.5 / 2 or 3 PushButtonVWE4L4D1-A61*N 1.0 10 1.5 / 2 or 3 Screwdriver




Mounting:CNOMO Interface

Port Size:Port 1 and 2 - 3mm, Port 3 - M5

Operating Pressure:



1.0 and 1.6 mm





Life Expectancy:



110 g (with 22mm coil fitted)143 g (with 30mm coil fitted)

Materials:Base: hostaform C9021 plastic22 mm coil: glass reinforced epoxycompound30 mm coil: glass reinforced thermoplasticArmature: stainless ironStem tube: stainless steelSprings: stainless steelSeals: nitrile rubber (viton top seat)

DC Supply Code

12V DC 224V DC 3

AC Supply Code

24V 50/60 Hz 448V 50/60 Hz 6110/120V 50/60 Hz 8230V 50/60 Hz 9

*Voltage Codes

3/2 Valves30 mm CNOMO in30 mm CNOMO intterer facfacee

30 mm CNOMO interface base

Lightweight plastic material

22 mm or 30 mm low power coiloptions

Circlip coil retention (threaded locknutdiffuser option also available)

Operating pressure up to 16 barg




†Alternative models are available:1) Extended push button manual override. Change 11th digit to 5 e.g. VWE4L4D1-A51*J2) Without manual override. Change 11th digit to 1 e.g. VWE4L4D1-A11*J3) Threaded locknut diffuser. Change 10th digit to E e.g. VWE4L4D1-E31*J

3/2 Normally Closed



DC Power 1.5, 4, 7.5 W AC Power Hold/Inrush 2/3, 8/10 VA

(3/5 VA for 230V 50/60 Hz a.c. low power coils)




Coil 30 mm removable encapsulated

Electrical Connections 3 pin table A DIN 436 50

Connector Plug Supplied without plug.Refer to data sheet 13.1 to order separately.

Manual Override Screwdriver - memory typePush button - non memory type


DC Power 2, 7.5 W (6 W for 24V d.c. high power coils)








Manual Override Screwdriver - memory typePush button - non memory type

2.2.062.2.06/2/2


1.0 mm 0.026 0.030 29.61.6 mm 0.052 0.060 59.1

3/2 Valves30mm CNOMO30mm CNOMO inintterer facfacee

Please consult our Technical SalesDepartment for further information Nylon threaded locknut diffuser models Extended push button manual override

(gloved hand) - non memory type Viton (FPM) seal material 22mm coils with 2 wire electrical flying

leads 22mm coils with table B DIN 43 650

electrical connections Vacuum operation Non standard a.c. and d.c. voltages up to







Electrical Details - 22 mm coil

Electrical Details - 30 mm coil (low power option)

Please refer to installation drawing on thenext page for details.


3/2 Valves30mm CNOMO30mm CNOMO inintterer facfacee

Dimensions (mm)

22

58

23

21

30

Port 1 (Inlet)Ø3 Hole

7.5

10

28.5

13

68

2 M4 Fixing Screws

44 CRS

37.5

75

35.5

Port 3 (Exhaust)

Port 2 (Outlet)Ø3 Hole

30

58

23

21

30

7.5

Port 1 (Inlet)Ø3 Hole

Port 2 (Outlet)Ø3 Hole

10

67

28.5

13

2 M4 Fixing Screws

79

41

39 CRS

37.5

Port 3 (Exhaust)

22mm coil option

30mm coil option

IMI Webber Ltd. has a policy of continuous product development and reserves the right to change specifications without prior notice.Issue 1 LM/5/99



2.2.062.2.06/3/3




Mounting:4 M4 threaded holes on 24mmcentres

Port Size:G1/8 (All three ports)

Operating Pressure:



1.0, 1.5, 2.0, and 2.5 mm





Life Expectancy:


Weight:240 g (without plug)

Materials:

Base: zinc alloy to BS 1008 (epoxypowder coated)Coil: glass reinforced nylonArmature: stainless ironStem tube: stainless steelSprings: stainless steelSeals: nitrile rubber (viton top seat)







Diffuser on 3/2 normally closed models


†Alternative models are available:1) Lever manual override. Change 7th digit to 3 e.g. XL12023001/**2) Without manual override. Change 7th digit to 0 e.g. XL12020001/**

Model Number Orifice Pressure Power Manual(mm) (barg) (W/VA) Override†

3/2 Normally ClosedXL52021101/** 1.5 16 9/20 ScrewdriverXL52021201/** 2.0 16 9/20 ScrewdriverXL52021301/** 2.5 10 9/20 ScrewdriverXL32021001/** 1.0 16 4.5/10 ScrewdriverXL32021101/** 1.5 14 4.5/10 ScrewdriverXL32021201/** 2.0 10 4.5/10 ScrewdriverXL32021301/** 2.5 4 4.5/10 ScrewdriverXL12021001/** 1.0 10 1 ScrewdriverXL12021101/** 1.5 4 1 Screwdriver3/2 Normally OpenXL53021100/** 1.5 16 9/20 ScrewdriverXL53021200/** 2.0 16 9/20 ScrewdriverXL53021300/** 2.5 10 9/20 ScrewdriverXL33021000/** 1.0 16 4.5/10 ScrewdriverXL33021100/** 1.5 14 4.5/10 ScrewdriverXL33021200/** 2.0 10 4.5/10 ScrewdriverXL33021300/** 2.5 4 4.5/10 ScrewdriverXL13021000/** 1.0 10 1 ScrewdriverXL13021100/** 1.5 4 1 Screwdriver

3/2 Normally Open

3/2 Normally Closed



12V 4.5, 9 16 24V 50/60Hz 10, 20 8124V 1, 4.5, 9 10 48V 50/60Hz 10, 20 168

110/120V 50/60Hz 10, 20 131230V 50/60Hz 10, 20 137

**Voltage Codes




1.0 mm 0.030 0.034 34.01.5 mm 0.064 0.074 72.02.0 mm 0.107 0.123 121.02.5 mm 0.164 0.189 186.0


Please consult our Technical SalesDepartment for further information Lever manual overrides Viton (FPM) seal material Vacuum operation Non standard a.c. and d.c. voltages up to



41 CRS

Port 3

69

2 Ports1/8 BSP

16

40

69

32

24

24

M4 Mounting Holes

83

41

32

Dimensions (mm)














Electrical Details





2.3.012.3.01/2/2




Mounting:2 M4 threaded holes in base on12.7mm fixing centres

Port Size:G1/4 (Exhaust port G1/8)

Operating Pressure:



1.5, 2.0 and 2.5 mm





Life Expectancy:


Weight:


Materials:

Base: brassCoil: glass reinforced nylonArmature: stainless ironStem tube: stainless steelSprings: stainless steelSeals: nitrile rubber (viton top seat)





Exhaust diffuser supplied as standard


Diffuser supplied as standard



3/2 Normally ClosedXL52033201/** 2.0 16 9/20 LeverXL52030201/** 2.0 16 9/20 NoneXL52033301/** 2.5 10 9/20 LeverXL52030301/** 2.5 10 9/20 NoneXL32033101/** 1.5 16 4.5/10 LeverXL32030101/** 1.5 16 4.5/10 NoneXL32033201/** 2.0 10 4.5/10 LeverXL32030201/** 2.0 10 4.5/10 NoneXL32033301/** 2.5 4 4.5/10 LeverXL32030301/** 2.5 4 4.5/10 None

3/2 Normally Closed



12V 4.5, 9 16 24V 50/60Hz 10, 20 8124V 4.5, 9 10 48V 50/60Hz 10, 20 168

110/120V 50/60Hz 10, 20 131230V 50/60Hz 10, 20 137

**Voltage Codes




DC Power 4.5, 9 WAC Power Hold/Inrush 10/14, 20/27 VA







Manual Override Lever - memory typeTurn to operate


1.5 mm 0.064 0.074 72.02.0 mm 0.107 0.123 121.02.5 mm 0.164 0.189 186.0


Please consult our Technical SalesDepartment for further information Viton (FPM) seal material Vacuum operation Non standard a.c. and d.c. voltages up to



41 CRS

Port 3

78

2 Ports1/4 BSP

44

73

12.7

12.7

32

2 M4 Mounting Holes

41

92

32

50

36

Dimensions (mm)





Electrical Details





2.3.022.3.02/2/2





Base/Port Size:Standard interface base(Exhaust Port G1/8)

Operating Pressure:



1.0, 1.5, 2.0, and 2.5 mm





Life Expectancy:


Weight:


Materials:

Base: polyesterCoil: glass reinforced nylonArmature: stainless ironStem tube: stainless steelSprings: stainless steelSeals: nitrile rubber (viton top seat)

3/2 Valves32mm in32mm intterer facface e


Interface base for manifold mounting




Diffuser on 3/2 normally closed models




12V 4.5, 9 16 24V 50/60Hz 10, 20 8124V 1, 4.5, 9 10 48V 50/60Hz 10, 20 168

110/120V 50/60Hz 10, 20 131230V 50/60Hz 10, 20 137

**Voltage Codes


†Alternative models are available:1) Lever manual override. Change 7th digit to 3 e.g. XL12013001/**2) Without manual override. Change 7th digit to 0 e.g. XL12010001/**

Model Number Orifice Pressure Power Manual(mm) (barg) (W/VA) Override†

3/2 Normally ClosedXL52011101/** 1.5 16 9/20 ScrewdriverXL52011201/** 2.0 16 9/20 ScrewdriverXL52011301/** 2.5 10 9/20 ScrewdriverXL32011001/** 1.0 16 4.5/10 ScrewdriverXL32011101/** 1.5 14 4.5/10 ScrewdriverXL32011201/** 2.0 10 4.5/10 ScrewdriverXL32011301/** 2.5 4 4.5/10 ScrewdriverXL12011001/** 1.0 10 1 ScrewdriverXL12011101/** 1.5 4 1 Screwdriver3/2 Normally OpenXL53011100/** 1.5 16 9/20 ScrewdriverXL53011200/** 2.0 16 9/20 ScrewdriverXL53011300/** 2.5 10 9/20 ScrewdriverXL33011000/** 1.0 16 4.5/10 ScrewdriverXL33011100/** 1.5 14 4.5/10 ScrewdriverXL33011200/** 2.0 10 4.5/10 ScrewdriverXL33011300/** 2.5 4 4.5/10 ScrewdriverXL13011000/** 1.0 10 1 ScrewdriverXL13011100/** 1.5 4 1 Screwdriver

3/2 Normally Open

3/2 Normally Closed



1.0 mm 0.021 0.024 24.01.5 mm 0.045 0.051 50.02.0 mm 0.085 0.098 96.02.5 mm 0.111 0.128 126.0






41 CRS

Port 3

659

16

32

7

Port 1

24

242 M4 x 25 Fixing Screws

32

78

41

40

69

Port 2

Dimensions (mm)














Electrical Details





2.3.032.3.03/2/2


12V 4.5, 9 16 24V 50/60Hz 10, 20 8124V 1, 4.5, 9 10 48V 50/60Hz 10, 20 168

110/120V 50/60Hz 10, 20 131230V 50/60Hz 10, 20 137




Mounting:

M5 x 0.8 threaded holes in manifoldon centres as shown overleaf

Port Size:G 1/8 (All 3 ports)

Operating Pressure:



1.0, 1.5, 2.0, and 2.5 mm





Life Expectancy:



N x 241g (N = number of stations)

Materials:

Interface base: polyesterManifold: anodised aluminiumCoil: glass reinforced nylon Armature: stainless ironStem tube: stainless steelSprings: stainless steelSeals: nitrile rubber (viton top seat)

3/2 Valves32mm manif32mm manifold mounold mountted G1/8 ed G1/8






Diffuser supplied as standard


To order, quote model number, inserting number of stations required at ## (01 to 30), followed by the voltagecode for your power requirement from the table below

3/2 Normally Closed

**Voltage Codes




3/2 Normally Closed679867##/XL52011101/** 1.5 16 9/20 Screwdriver679867##/XL52010101/** 1.5 16 9/20 None679867##/XL52011201/** 2.0 16 9/20 Screwdriver679867##/XL52010201/** 2.0 16 9/20 None679867##/XL52011301/** 2.5 10 9/20 Screwdriver679867##/XL52010301/** 2.5 10 9/20 None679867##/XL32011001/** 1.0 16 4.5/10 Screwdriver679867##/XL32010001/** 1.0 16 4.5/10 None679867##/XL32011101/** 1.5 14 4.5/10 Screwdriver679867##/XL32010101/** 1.5 14 4.5/10 None679867##/XL32011201/** 2.0 10 4.5/10 Screwdriver679867##/XL32010201/** 2.0 10 4.5/10 None679867##/XL32011301/** 2.5 4 4.5/10 Screwdriver679867##/XL32010301/** 2.5 4 4.5/10 None679867##/XL12011001/** 1.0 10 1 Screwdriver679867##/XL12010001/** 1.0 10 1 None679867##/XL12011101/** 1.5 4 1 Screwdriver679867##/XL12010101/** 1.5 4 1 None


1.0 mm 0.021 0.024 24.01.5 mm 0.045 0.051 50.02.0 mm 0.085 0.098 96.02.5 mm 0.111 0.128 126.0


Please consult our Technical SalesDepartment for further information Lever manual override Viton (FPM) seal material Anodised aluminium manifolds Vacuum operation Non standard a.c. and d.c. voltages up to

+ 30% tolerance Individual sub bases and manifolds -

please refer to data sheet 6.1.01 Individual 32mm interface valves



17.2

32.6

70

16


82

33

95

All Ports 1/8 BSP

12

24

M5 Fixing Holes

Dimensions (mm)














Electrical Details





2.3.042.3.04/2/2







Mounting:Through-holes supplied with 2 M4 x70mm bolts

Base:Standard interface with ports 1, 2and 3 in base

Operating Pressure:



1.5, 2.0, and 2.8 mm





Life Expectancy:


Weight:


Materials:

Body and base: die cast zinc alloyCoil: epoxy resinArmature: stainless ironStem tube: stainless steelSprings: stainless steelSeals: nitrile rubber

3/2 Valves32mm in32mm intterer facface (base pe (base p oror tted) ed)


Collected exhaust designed for mani-fold mounting ideal for clean roomapplications

Normally closed and normally openmodels

Front and rear option memory type-manual overrides


To order, quote model number, inserting voltage code foryour power requirement at **, from the table overleaf

† Model numbers listed are for front option lever manual overrides and frontoption electricsFor rear option manual overrides or rear option electrics please consult ourTechnical Sales Department

3/2 Normally Open

3/2 Normally Closed

Model Number† Orifice (mm) Pressure Power Manual(Inlet/Exhaust) (barg) (W/VA) Override

3/2 Normally Closed18404715/** 1.5/2.0 14 10/11 None18404700/** 2.0/2.0 10 10/11 None18404728/** 2.8/2.0 8 10/11 None18504715/** 1.5/2.0 14 10/11 Lever18504700/** 2.0/2.0 10 10/11 Lever18504728/** 2.8/2.0 8 10/11 Lever20407715/** 1.5/2.0 10 3.2/4 None20407700/** 2.0/2.0 7 3.2/4 None20407728/** 2.8/2.0 4 3.2/4 None20507715/** 1.5/2.0 10 3.2/4 Lever20507700/** 2.0/2.0 7 3.2/4 Lever20507728/** 2.8/2.0 4 3.2/4 Lever3/2 Normally Open18405500/** 1.5/2.0 14 10/11 None18405700/** 2.0/2.0 10 10/11 None18405728/** 2.0/2.8 8 10/11 None18605500/** 1.5/2.0 14 10/11 Lever18605700/** 2.0/2.0 10 10/11 Lever18605728/** 2.0/2.8 8 10/11 Lever20408500/** 1.5/2.0 10 4/5 None20408700/** 2.0/2.0 7 4/5 None20408728/** 2.0/2.8 7 4/5 None20608500/** 1.5/2.0 10 4/5 Lever20608700/** 2.0/2.0 7 4/5 Lever20608728/** 2.0/2.8 7 4/5 Lever



DC Power 3.2, 4,10 WAC Power Hold/Inrush 4/8, 5/8,11/22 VA




Electrical Connections 3 pin (Industrial standard)Front option electrics - pins located over Port 2Rear option electrics - pins located 180° to Port 2

Connector Plug Supplied without plug.Refer to data sheet 6.2.01 to order separately

Manual Override Lever - memory typeFront option - located over Port 2Rear option - located 180° to Port 2

DC Power CodeSupply (W)

12V 3.2 PH4 EA10 BB

24V 3.2 JF4 CP10 JG


1.5 mm 0.060 0.070 69.42.0 mm 0.094 0.108 106.02.8 mm 0.210 0.240 241.7

3/2 Valves32mm in32mm intterer facface (base pe (base p oror tted)ed)

Please consult our Technical SalesDepartment for further information Dual function models Rear option manual override and rear

option electrics Viton (FPM) seal material - add prefix “V” to

model number Vacuum operation Non standard a.c. and d.c. voltages up to

+ 30% tolerance Sub bases and manifolds



67

16

35

85

41

32

Port 1

24

Port 324

M4 Mounting Screws

Port 2

32

4.2

64

Electrical Details

Dimensions (mm)






24V 4, 5 EA11 BB

48V 4, 5 JG 11 BE

110/120V 4, 5 EB11 BF

230V 4, 5 EC11 JH

**Voltage Codes






2.4.012.4.01/2/2




Mounting:Ø4.5mm fixing holes in manifold,1 per station

Port Size:Ports 1 and 3 - G1/4Port 2 - G1/8

Operating Pressure:



1.5, 2.0, and 2.8 mm





Life Expectancy:




Materials:

Body and base: die cast zinc alloyManifold: anodised aluminiumCoil: epoxy resin Armature: stainless ironStem tube: stainless steelSprings: stainless steelSeals: nitrile rubber

To order, quote model number, inserting number of stations required at ## (01 to 20), followed by the voltagecode for your power requirement from the table overleaf

3/2 Valves32mm manif32mm manifold mounold mountted (base ped (base p oror tted) ed)


1 to 20 station normally closed andnormally open manifold systems

Different valve functions and voltagescan be combined on manifold

Collected exhaust ideal for clean roomapplications

Front and rear option manual overrides


3/2 Normally Open

3/2 Normally Closed


Model Number† Orifice (mm) Pressure Power Manual(Inlet/Exhaust) (barg) (W/VA) Override

3/2 Normally Closed6886##/18404715/** 1.5/2.0 14 10/11 None6886##/18404700/** 2.0/2.0 10 10/11 None6886##/18404728/** 2.8/2.0 8 10/11 None6886##/18504715/** 1.5/2.0 14 10/11 Lever6886##/18504700/** 2.0/2.0 10 10/11 Lever6886##/18504728/** 2.8/2.0 8 10/11 Lever6886##/20407715/** 1.5/2.0 10 3.2/4 None6886##/20407700/** 2.0/2.0 7 3.2/4 None6886##/20407728/** 2.8/2.0 4 3.2/4 None6886##/20507715/** 1.5/2.0 10 3.2/4 Lever6886##/20507700/** 2.0/2.0 7 3.2/4 Lever6886##/20507728/** 2.8/2.0 4 3.2/4 Lever3/2 Normally Open6886##/18405500/** 1.5/2.0 14 10/11 None6886##/18405700/** 2.0/2.0 10 10/11 None6886##/18405728/** 2.0/2.8 8 10/11 None6886##/18605500/** 1.5/2.0 14 10/11 Lever6886##/18605700/** 2.0/2.0 10 10/11 Lever6886##/18605728/** 2.0/2.8 8 10/11 Lever6886##/20408500/** 1.5/2.0 10 4/5 None6886##/20408700/** 2.0/2.0 7 4/5 None6886##/20408728/** 2.0/2.8 7 4/5 None6886##/20608500/** 1.5/2.0 10 4/5 Lever6886##/20608700/** 2.0/2.0 7 4/5 Lever6886##/20608728/** 2.0/2.8 7 4/5 Lever

† Model numbers listed are for front option lever manual overrides and frontoption electricsFor rear option manual overrides or rear option electrics please consult ourTechnical Sales Department

3/2 Valves32mm manif32mm manifold mounold mountted (base ped (base p oror tted)ed)

Please consult our Technical SalesDepartment for further information Manifolded valve assemblies with different

valve type and voltage combinations Rear option manual overrides and rear

option electrics Viton (FPM) seal material - add prefix “V” to

valve model number Vacuum operation Non standard a.c. and d.c. voltages up to

+ 30% tolerance Individual sub bases/manifolds

- please refer to data sheet 6.1.01 Individual 32mm base ported valves



113

67

33.34

6.68Fixing Holes suitable forM4 Bolts 1 per Station

42

95

Ports 1/8 BSP

21.5

15.87

Ends Tapped1/4 BSP

28

49.21

69




DC Power CodeSupply (W)

12V 3.2 PH4 EA10 BB

24V 3.2 JF4 CP10 JG


1.5 mm 0.060 0.070 69.42.0 mm 0.094 0.108 106.02.8 mm 0.210 0.240 241.7




24V 4, 5 EA11 BB

48V 4, 5 JG 11 BE

110/120V 4, 5 EB11 BF

230V 4, 5 EC11 JH

**Voltage Codes






2.4.022.4.02/2/2


DC Power 3.2, 4,10 WAC Power Hold/Inrush 4/8, 5/8,11/22 VA




Electrical Connections 3 pin (Industrial standard)Front option electrics - pins located over Port 2Rear option electrics - pins located 180° to Port 2

Connector Plug Supplied without plug.Refer to data sheet 6.2.01 to order separately

Manual Override Lever - memory typeFront option - located over Port 2Rear option - located 180° to Port 2

Electrical Details


Single station 31.8Multiple stations 33.3 x (N-1) + 31.8


2/2 NCServo

G 1/4G 3/8G 1/2G 3/4

G 1

Brass body

810122025

0.1 - 16 3.1.013.1.01

Product Overview2/2 ser2/2 ser vvo assisto assisted solenoid ved solenoid valvalveses

Seri

es

Mo

del

Fun

ctio

n

Po

rt C

on

nec

tio

ns

Typ

e

Ori

fice

(mm

)

Pre

ssu

re (b

arg

)

Dat

a Sh

eet


2/2 Valvesserser vvo assisto assisted G1/4 ted G1/4 to G1o G1

Brass bodied servo assisted solenoidvalve

In line G 1/4 to G1 connections

Operating pressure 0.1 to 16 barg

Range of seal materials available forspecial applications

Solenoid interchangeable without tools(Click-On)


2/2 Normally Closed

a

P

Ab

a b

*Voltage Codes



24V 8 A 24V 50 Hz 12 C205V 8 B 110V 50 Hz 12 D

230V 50 Hz 12 E

120V 60 Hz 12 F220V 60 Hz 12 G



Medium:Compressed air, filtered, lubricatedand non-lubricated, water and othernon corrosive liquids and gases

Operation:Solenoid pilot operated servo

Mounting:Position optional, preferably upright

Port Sizes:G1/4, G3/8, G1/2, G3/4, G1

Operating Pressure:

0.1 to 16 barg (with gaseous and liquid

fluids up to 25 mm2/s (cSt))


8, 10, 12, 20 and 25 mm


1.9 to 9.5 kv m3/hSee table overleaf for individual details


-10°C* to +90°C fluid-10°C* to +50°C ambient* Consult Technical Service for use below -10°C

Life Expectancy:

Typically in excess of 250,000 cycles

Weight:

G 1/4 model - 470gG 3/8 model - 450gG 1/2 model - 500gG 3/4 model - 650gG 1 model - 950g

Materials:

Body: brassCoil: epoxy resin (duroplast) encapsulated insulation class FArmature: 1.4105, Stem tube: 1.4303Springs: 1.4310/1.4568Seat Seal: NBR (nitrile rubber)Diaphragm: NBR/PVDF

Model Number Port Pressure Power ManualSize (barg) (W/VA) Override

2/2 Normally Closed82 400 00.9100* G1/4 0.1 - 16 8/12 None82 401 00.9100* G3/8 0.1 - 16 8/12 None82 402 00.9100* G1/2 0.1 - 16 8/12 None82 403 00.9100* G3/4 0.1 - 16 8/12 None82 404 00.9100* G1 0.1 - 16 8/12 None82 400 02.9100* G1/4 0.1 - 16 8/12 Screwdriver82 401 02.9100* G3/8 0.1 - 16 8/12 Screwdriver82 402 02.9100* G1/2 0.1 - 16 8/12 Screwdriver82 403 02.9100* G3/4 0.1 - 16 8/12 Screwdriver82 404 02.9100* G1 0.1 - 16 8/12 Screwdriver


DC Power 8 WAC Power Hold/Inrush 12(7W)/15 VA

Typical Electrical On 50 to 80 ms (at 6 barg water)

Response Time Off 400 to 800 ms



Coil Removable and interchangeable


Connector Plug Supplied without plugRefer to data sheet 6.2.01 to order separately

Manual Override Screwdriver - quarter turn excentre,latching in open position


Please consult our Technical SalesDepartment for further information Normally open valves

Change 6th and 7th digit to 01 e.g.82 400 01.9100

FKM seat seal max. fluid temperature+110°CChange 6th and 7th digit to 03 e.g.82 400 03.9100

EPDM seat seal for hot water, max fluidtemperature +110°C (0.3 to 16 barg)Change 6th and 7th digit to 14 e.g.82 400 14.9100






8 mm 1.90 2.19 215110 mm 3.00 3.45 339612 mm 3.80 4.37 430220 mm 6.10 7.02 690525 mm 9.50 10.93 10754

Electrical Details


3.1.013.1.01/2/2 Issue 1 LM/5/99in valve technologyThe Controlling force


Inlet Orifice Kv m3/h l/min

8 mm 1.90 31.6710 mm 3.00 50.0012 mm 3.80 63.3320 mm 6.10 101.6725 mm 9.50 158.33



Dimensions (mm)

T

BL1

L

36 x 30

20

R

H

H1

33

Ø A

Port Size (R) Orifice (mm) Ø A B H H1 L L1 T

G 1/4 8 44 19.5 78.5 67 60 27.5 12G 3/8 10 44 19.5 78.5 67 60 27.5 12G 1/2 12 44 19.5 81 67 67 31 14G 3/4 20 50 24 88 71.5 80 36.5 16G 1 25 62 29.5 97.5 77 95 44 18




3.1.013.1.01/3/3

2/2 NC22 mm

22 mm

In line 15 mm

compressionfittings

Water management

2.0, 4.0 0 - 10 4.1.014.1.01

2/2 NC4mm/6mm

push-in fittings

Inflation /deflation

control1.0 0 - 10 4.2.014.2.01

22 mm 2/2 NC3/2 NC

Interface Automotive1.0, 1.6,2.0

2.5, 3.00 - 12 4.3.014.3.01

Product Overviewspsp ecial applicecial applic aation vtion valvalveses

Seri

es

Mo

del

Fun

ctio

n

Po

rt C

on

nec

tio

ns

Ap

plic

atio

n

Ori

fice

(mm

)

Pre

ssu

re (b

arg

)

Dat

a Sh

eet

bespokedesign 5.1.015.1.01As specified by customer - see data sheet for service details





Mounting:In line, freestanding position

Port Connections:Integral 15mm compression fittings

Operating Pressure:



2.0 and 4.0 mm


1.8 to 5.87 l/min.See Flow Characteristics table overleaf for individual details



Life Expectancy:


Weight:


Materials:

Base, compression fittings andolives: brassValve base: moulded plastic (fortron)Inlet filter: stainless steelCoil: glass reinforced epoxy compound Armature: stainless ironStem tube: stainless steelSprings: stainless steelSeals: nitrile rubber (viton top seat)


6V Latching CA 24V 50/60Hz 8 BB9V Latching PG 48V 50/60Hz 8 BE12V Latching CB 110/120V 50/60Hz 8 BF12V 7.5 CB 230V 50/60Hz 8 BJ24V 6 PC

Special Application Valves22mm w22mm waatter managemener managementt


In line 15mm compression fittings

Latching version for zero power consumption

Suitable for use with standard waterindustry fittings

UK WFBS approved product



* Calculations are typical and based on a 6V DC coilEnergy usage per operation based on 50ms pulse

2/2 Normally Closed

**Voltage Codes

Zero power latching valves only available in 6, 9 and 12V DC



2/2 Normally ClosedWMS10000/** 2.0 10 6 or 7.5/8 NoneWMS40000/** 4.0 0.5 6 or 7.5/8 NoneWMS11000/** 2.0 10 6 or 7.5/8 ScrewdriverWMS41000/** 4.0 0.5 6 or 7.5/8 Screwdriver

Model Number Orifice Pressure Micro-Amp Manual(mm) (barg) Hours∗ Override

2/2 Normally Closed LatchingWML10000/** 2.0 10 17 NoneWML40000/** 4.0 0.5 17 NoneWML11000/** 2.0 10 17 ScrewdriverWML41000/** 4.0 0.5 17 Screwdriver


DC Power 7.5 W (6 W for 24V d.c. coils)

AC Power Hold/Inrush 8/12 VA Latching Valve Power Zero - 50 ms pulse required to Consumption operate the valve (7.5 W d.c. coil)







Manual Override Screwdriver - memory type(Turn 180° anti-clockwise to operate,turn clockwise to release)


2.0 mm 0.11 0.127 1.804.0 mm 0.35 0.403 5.87

Special Application Valves22mm w22mm waatter managemener managementt


model number) 2 wire electrical flying leads Table B DIN 43650 electrical connections 30mm low power coils with Table A DIN




26 A/F

47

20

22

15 mm Compression Nut both ends53

11

64

44 CRS

37.5

81

Dimensions (mm)





Electrical Details





4.1.014.1.01/2/2




Mounting:Rear mounting lug (integral)

Port Size:4mm/6mm push in fittings

Operating Pressure:

Up to 10 bar

Inlet Orifice Size:

1.0mm


29 l/minSee Flow Characteristics table overleaf for individual details




Life Expectancy:


Weight:200 g (without plug)

Materials:

Base: acetalCoil: glass reinforced epoxy compoundArmature: stainless ironStem tube: stainless steelSprings: stainless steelSeals: nitrile rubber (viton top seat)

Special Application Valves22mm t22mm t win solenoidwin solenoid

Twin solenoid offers dual control

Two 2/2 normally closed valves combined in a single unit

Integral push in fittings for simpleand rapid installation

Ideal for applications requiringinflation and deflation control


To order please contact the Sales Department, quotingdata sheet reference number below

Valve 1

Valve 2

Typical Applications

Seat height adjustment Hospital bed overlay Lifting aids for the elderly and disabled Textile machines Tyre inflation units Inflation/deflation applications

Please contact our Technical Sales team for further information.



2/2 Normally Closed On Application 1.0 10 2/2.5 or 5 None

Voltages 12 V and 24 V d.c.24V, 48V, 110/120V, 230V 50/60 Hz a.c.










Special Application Valves22mm t22mm t win solenoidwin solenoid

Please consult our Technical SalesDepartment for further information 22mm coils with 2 wire electrical flying

leads Table B DIN 43650 electrical connections Connector plugs - please refer to data


Dimensions (mm)




Please contact our Technical Service fordetails.



1.0 mm 0.026 0.029 29.0

22

9912.5

17.3 9.

2

22.5

Coil not shownfor clarity2236

Ø 6 PIF

Ø 6 PIF

Ø 4 PIF

Electrical Details




4.2.014.2.01/2/2

As well as having a complete range of products for standard applications, Webber design andmanufacture totally new valves for new applications.

Sometimes customisation may simply involve designing a different coil, on other occasions it may mean revising thefluid connections with a new base design.

However special your application, our team of experts willalways work with you to devise the most cost effectivesolution for your particular needs.

In specifying a new design, we will need to consider a num-ber of key variables, listed below:

The application The environment Liquid or gas to be handled Physical constraints - size and weight Power supply Required flow rate Fluid and ambient temperatures Valve function Port size and type of connection Special materials Minimum and maximum pressures Manual operator requirements Electrical connectors

Special Application Valvesbb espesp okoke designe design

Complete bespoke design and customisationservice

Latest design and prototyping techniquesemployed

Joint engineering ensures complete integration with OEM requirements

Products developed for all applications andenvironments (see overleaf)

Customisation for cost effective solutions.....


Special Media Valves

Connections designed to optimise OEM manufacture

Integration eliminates the need for additional fittings

Space and weight saving solutions

Special Application Valvesbb espesp okoke designe design

Typical Applications

Valves can be adapted for use with a variety of differentmedia including drinks, printing inks and oils. A range ofspecial grade body, manifold or seal materials can besupplied to suit the application. Our clean room facilitiesensure contamintation-free cleaning and packagingprocesses.

Food compatible range

Suitable for aggressive solvents

Ultrasonic cleaning facilities

Bespoke Connection Valves

Webber offers engineering and design recommendationsfor the most demanding installations. Bespoke connection valves are designed to faciliate system design,simplify installation and lower OEM manufacturing costs.

Extreme Specification Valves

Webber have developed extreme specification valveswhich are capable of performing under highly demanding circumstances. These valves undergo rigor-ous testing to ensure they can withstand the harshestenvironments, such as those of the railway and automotive industries.

Wide voltage tolerances

Wide temperature ranges

Protection in excess of IP65

Automotive

Commercial vehicle braking systems Automotive air suspension systems Road sweeping vehicles Vehicle lubrication systems Engine ignition immobilisation Automatic seat adjustment Power take off systems

Food and Drink

Drink dispense systems Cold drinks vending Brewery systems

Medical

Powered lifting aids Nebuliser drug delivery systems Ventilation equipment Dental units Lab analysis equipment Pressure sore relief

Water Management

Domestic water meters Infra red toilet flushing systems Automatic washroom equipment Car wash

Environmental Technology

Leak detection Gas analysis Water samplers Flood control Air pollution control

Printing

Ink jet printing

Areas of Expertise




5.1.015.1.01/2/2

1 to 890

(15 mmvalves)

81(22 mmvalves)

3/2 NC3/2 NO

Base ported M5Clear

anodisedaluminium

6.1.016.1.01

1 to 402/2 NC3/2 NC

Top exhaust G 1/8Clear

anodisedaluminium

6.1.016.1.01

67(32 mmvalves)

1 to 302/2 NC3/2 NC

Top exhaust G1/8Clear

anodisedaluminium

6.1.016.1.01

68(32 mm

baseportedvalves)

1 to 203/2 NC3/2 NO

Base portedG1/4G1/8

Clearanodised

aluminium6.1.016.1.01

Product Overviewaccaccessoressories (manifies (manifolds)olds)

Seri

es

Mo

del

No.

Stat

ion

s

Fun

ctio

n

Po

rtin

gA

rran

gem

ent

Po

rt S

ize

Mat

eria

ls

Dat

a Sh

eet

Continued overleaf


Product Overviewaccaccessoressories (plugs)ies (plugs)

90-10035

PCC10160

6.2.016.2.01

Industrial standard

Pg 9 6.2.016.2.01

PCC40110

30 mm DIN 43650 table A Pg 11

6.2.016.2.01

Seri

es

Mo

del

To S

uit

Co

il Si

ze

Elec

tric

alC

on

nec

tio

ns

Gla

nd

Siz

e

Dat

a Sh

eet

Industrial standard

Pg 7

32 mmIndustrial

standard or DIN 43650 table A

Pg 11

15 mm

22 mm


90-15927 DIN 43650 table B Pg 9 6.2.016.2.0122 mm



Light oil, water and other non corrosive liquids and gases

Function:

Series 90 - 3/2 normally closed or 3/2normally openSeries 81* - 2/2 normally closed or3/2 normally closedSeries 67* - 2/2 normally closed or3/2 normally closed Series 68* - 3/2 normally closed or3/2 normally open* valves of both types may be mounted on asingle manifold block

Mounting:Series 90 - M3 mounting holesSeries 81 - M4 mounting holesSeries 67 - M5 mounting holesSeries 68 - Mounting holes suitable

for M4 bolts

Port Size:Series 90 - M5Series 81 - G1/8Series 67 - G1/8Series 68 - Ports 1 and 3 G1/4

Port 2 G1/8

Weight (nominal):

Series 90 - Number of stations x 15gSeries 81 - Number of stations x 32gSeries 67 - Number of stations x 41gSeries 68 - Number of stations x 99g

Materials:

Clear anodised aluminium

Accessoriesfifixxed length manifed length manifoldsolds

Fixed length manifold systems up to 40stations

G 1/8 and M5 porting

2/2 and 3/2 valve combinations

Anodised aluminium

Collected exhaust manifolds for cleanroom applications


To order, quote model number followed by the number ofstations required at ##


Model Series No. of Port PortingNumber (Valve Type) Stations Size Arrangement

Clear Anodised900186## 90 (15mm valves) 1 to 8 M5 Base ported810861## 81 (22mm valves) 1 to 40 G1/8 Top exhaust679867## 67 (32mm valves) 1 to 30 G1/8 Top exhaust6886## 68 (32mm base 1 to 20 G1/4 & Base ported

ported valves) G1/8


Single station 16Multiple 17 x (N-1) + 16

9.65 Ø2 Hole into Inlet Port

Ø2 Hole intoOutlet Port

M3 x 6 Deep Manifold Fixing Holes

3

3 10


View on Arrow A

Ø2 Hole into Exhaust Port17

1.3

10.4

10.75

M5 ExhaustPort

A

M5 Inlet Port5.25

M3 ValveFixing Holes


Dimensions (mm)

Series 81 manifolds to suit 22mm valves

Series 90 manifolds to suit 15mm valves

M3 Valve Fixing Holes

19.5 32

.65

17.2

1/8 BSP Inlet Port

17

17

25


12

M4 Manifold Fixing Holes

Ø3 Hole into Inlet Port

Ø3 Hole into Outlet Port

1/8 BSP Outlet Ports

6.1.016.1.01/2/2 Issue 1 LM/5/99in valve technologyThe Controlling force






Single station 31.8Multiple 33.3 x (N-1) +31.8

1/4 BSPInlet Port

1/4 BSPExhaust Port

1022

28

49.2

24


M4 Valve Fixing Holes


33.34

Manifold Fixing Holes Suitable for M4 Bolts Ø3.18 Holes

Into Ports

24


Please consult our Technical Sales Departmentfor further information Blanking plug assembly Blanking plate assembly

Options and AccessoriesPorting Configuration

Series 68 manifolds to suit 32mm valves (base ported)

Series 67 manifolds to suit 32mm valves (top exhaust)

M4 ValveFixing Holes

19.5

17.2

32.6

51/8 BSPInlet Port

33

16

24



M5 ManifoldFixing Holes

Ø3 Holeinto Inlet Port

Ø3 Holeinto Outlet Port

24

Please refer to Webber Technical InformationSheet 1 (Section 8 of Product Catalogue) forporting configuration details.




6.1.016.1.01/3/3






Mounting:

All plugs supplied with gasket andfixing screwPlugs may be rotated in 180°intervals

Current Rating:Nominal - 16 AOperating - 10 A

Contact Resistance:

4 m ΩConductor Cross-section:

Max 1.5mm2

Protection Class:IP65 (DIN 40 050)

Insulation Class:

Group C (VDE 0110)

Temperature Range:

-40°C to +90°C (gasket)

Gland Size:

See Ordering Information tableopposite

Materials:

Housing - black polyamide with glassGasket - nitrile

Accessoriescconneconnec ttor plugsor plugs

Connector plugs with cable gland tosuit all power and voltage levels

Industrial standard, DIN 43650 (Form Aand B) compatible

Suitable for 15mm, 22mm, 30mm and32mm coils

Protection class IP 65

Cable gland sizes Pg7, Pg9 and Pg11


To order, quote model number corresponding to coil typerequired

Model Number Coil Electrical GlandSize Connection Size

90-10035 15mm Industrial Standard Pg 7PCC 10160 22mm Industrial Standard Pg 990-15927 22mm DIN 43650 Table B Pg 9PCC 40110 30mm DIN 43650 Table A Pg 11PCC 40110 32mm Industrial Standard/ Pg 11

DIN 43650 Table A


30

28.5

28

40

Ø18

20.8

10

9

37.5

Model 90-15927 to suit 22mm DIN 436 50table B coils

Model PCC 10160 to suit 22mm industrialstandard coils

Accessoriescconneconnec ttor plugsor plugs

Model 90-10035 to suit 15mm coils

Dimensions (mm)

15.5

9.4

27.5

9.4

25.5

23.5

15.5

26

Ø 15

20.8

11

14.5

37.5

40.5

28.5

28

30

Ø18

18

27

18

41

27

27

42

21

Model PCC 40110 to suit 30 and 32mm

DIN 436 50 table A or industrial standard coils




6.2.016.2.01/2/2

Technical Information Sheet 1pp oror ting cting confionfigurguraationtion

The porting arrangement of a valve varies according to function and model.In order to correctly configure the porting arrangement for your valve, pleaseselect the configuration required from the key below and refer to the corre-sponding figure overleaf.

InfInfo So Sheet 1heet 1/p/p.1.1

Guidance Notes

Key to Porting Configuration Diagrams


Function Series Port Porting Data SheetConnections Configuration Reference

2/2 Normally Closed2/2 NC 22mm M5 Fig. A1 1.1.012/2 NC 22mm G1/8 Fig. A1 1.1.022/2 NC 22mm Manifolded G1/8 Fig. A2 1.1.03/1.1.042/2 NC 22mm Hosetail Fig. A1 1.1.052/2 NC 32mm G1/8 Fig. A1 1.2.012/2 NC 32mm G1/4 Fig. A1 1.2.022/2 NC 32mm Manifolded G1/8 Fig. A2 1.2.03/1.2.042/2 NC Servo (brass) G1/4 to G1 Fig. A3 3.1.012/2 NC Special Water Management Fig. A1 4.1.013/2 Normally Closed3/2 NC 15mm Interface Fig. C1 2.1.013/2 NC 15mm Manifolded Fig. C2 2.1.023/2 NC 22mm M5 Fig. C3 2.2.013/2 NC 22mm G1/8 Fig. C3 2.2.023/2 NC 22mm Manifolded G1/8 Fig. C4 2.2.03/2.2.043/2 NC 22mm Hosetail Fig. C3 2.2.053/2 NC 30mm CNOMO Fig. C3 2.2.063/2 NC 32mm G1/8 Fig. C3 2.3.013/2 NC 32mm G1/4 Fig. C3 2.3.023/2 NC 32mm Manifolded G1/8 Fig. C4 2.2.03/2.3.043/2 NC 32mm Base Ported Manifold Fig. C5 2.4.01/2.4.023/2 Normally Open3/2 NO 15mm Interface Fig. D1 2.1.013/2 NO 15mm Manifolded Fig. D2 2.1.023/2 NO 22mm G1/8 Fig. D3 2.2.023/2 NO 32mm G1/8 Fig. D3 2.3.013/2 NO 32mm Base Ported Manifold Fig. D4 2.4.01/2.4.02

PORT 1OUTLET

PORT 2INLET


Porting Configuration Diagrams - 2/2 Normally Closed Valves

Figure A3

Figure A1

Port 1 = outletPort 2 = inletPort 3 = blank

Port 1 = inletPort 2 = outletPort 3 = blank

PORT 1OUTLET

PORT 1OUTLET

PORT 1OUTLETPORT 2

INLET

Figure A2

INLET OUTLET

Port 1 = outletPort 2 = inletPort 3 = blank

InfInfo So Sheet 1heet 1/p/p.2.2 Issue 1 LM/5/99in valve technologyThe Controlling force


PORT 2 OUTLET

PORT 3 EXHAUST

PORT 1 INLET

Porting Configuration Diagrams - 3/2 Normally Closed Valves

Figure C3

Figure C1

PORT 3EXHAUST

PORT 2OUTLET

PORT 1INLET

Port 1 = inletPort 2 = outletPort 3 = exhaust


PORT 3EXHAUST

PORT 1INLET PORT 2

OUTLET

PORT 2OUTLET

PORT 2OUTLET

Figure C4

Figure C2

PORT 2OUTLET

PORT 2OUTLET

PORT 2OUTLETPORT 1

INLET

PORT 3EXHAUST

PORT 3EXHAUST

PORT 3EXHAUST



InfInfo So Sheet 1heet 1/p/p.3.3Issue 1 LM/5/99in valve technologyThe Controlling force


Porting Configuration Diagrams - 3/2 Normally Closed Valves (continued)

Figure C5


PORT 2OUTLET

PORT 2OUTLET

PORT 2OUTLET

PORT 3EXHAUST

PORT 1INLET

InfInfo So Sheet 1heet 1/p/p.4.4 Issue 1 LM/5/99in valve technologyThe Controlling force

PORT 2 OUTLET

PORT 3 INLET

PORT 1 EXHAUST

Porting Configuration Diagrams - 3/2 Normally Open Valves

Figure D1

PORT 2OUTLET

PORT 3INLET

PORT 1EXHAUST

Port 1 = exhaustPort 2 = outletPort 3 = inlet


PORT 1EXHAUST

PORT 3INLET

PORT 2OUTLET

PORT 2OUTLET

PORT 2OUTLET

Figure D2



InfInfo So Sheet 1heet 1/p/p.5.5

Figure D3 Figure D4


PORT 2OUTLET

PORT 2OUTLET

PORT 2OUTLET

PORT 3EXHAUST

PORT 1INLET




Date post:	02-Aug-2018
Category:	Documents
Upload:	truongduong
View:	231 times
Download:	1 times

Webber Electronic Catalogue - И7 - NORGREN … · SOLENOID valves in valve technology The...

Documents