WEBEX October 16, 2012 - Tennessee Gas Pipeline€¦ · October 16, 2012 . 2 Agenda ... 16 412781...

www.kindermorgan.com

WEBEX

October 16, 2012

2

Agenda

– Review “Pathed Non-threaded” Model

– Nomination Examples • Basic Business

– FTA (including AO)

– SA Pool

– Alternative Pooling Locations

– Storage Withdrawal

• Other Business – Extended Delivery Service (EDS)

– FTA (before CDP/after CDP)

– FAQs about balancing and nominating PINs

– New Nomination Entry Screens

– Appendix • Additional nomination examples

3

Pathed “Non-threaded” Model

4

Pathed “Non-threaded” Model

NAESB Nomination Model used in PASSKEY = Pathed (threaded)

– “Threaded” refers to linking a shipper’s specific commercial counterparties at receipt and delivery locations to a specific pathed transport nomination line item, and to each other.

NAESB Nomination Model used in DART= Pathed “Non-threaded”

– Allows a shipper to separate commercial counterparty (buy/sell) transactions at specific locations from transportation transactions between locations

– Gives shippers full control of their business via ranks. Shippers can individually rank supplies and markets, receipt and delivery locations, and paths between receipt and delivery locations. This model also inherently supports cross-contract ranking

5

Example of Threaded Nomination

Shipper TSA 12345

Delivery Point B

Receipt Point A

Delivery Point B

Receipt Point A

Up ID AAAAA

Up ID BBBBB

Down ID ZZZZZ

Down ID YYYYY

These two routes are pathed because a specific receipt location is tied to a specific delivery location on each line item.

These two routes are also threaded because commercial counterparties are linked together on each line item. The specific upstream supplier is tied to a specific downstream market on each line

item.

Shipper TSA 12345

Model currently used in PASSKEY

6

Example of “Non-threaded” Nomination

Model used in DART

Shipper TSA 12345 Delivery

Point B Receipt Point A

Up ID AAAAA

Up ID BBBBB

Down ID ZZZZZ

Down ID YYYYY

This nomination is still pathed because a specific receipt location is tied to a specific delivery location on each line item.

This nomination is not threaded because commercial counterparties are not specifically linked to each other. Reductions that will impact upstream suppliers or downstream markets is in the control of the shipper via

separately identified ranks.

Shipper’s Upstream (Buy) Line Items at A, ranked

independently from location ranks

Shippers Downstream (Sell) Line Items at B,

ranked independently from location ranks

Shipper’s Downstream (Transport) Line Item at A indicating B as the delivery

point.

Shipper’s Upstream (Transport) Line Item at B indicating A as the receipt

point (created automatically if started @Receipt Pin)

The path itself has a separate rank

7

NAESB Nomination Matrix

DART Nomination Window

8

DART Nomination Window

TT Desc

TT Desc

(GID Number) (Company Name) (Serv Req Duns )

8

(PIN Number) OPR/TSP-PIN Name County PIN DRN

To start entering nominations, enter PIN in the Rec/Del LocProp field and click Retrieve.

9

Counter Prty Nom is selected by default. Displays the counter party nomination quantity if counter party has nominated.

(Similar to “View Connecting Entities” screen in PASSKEY)

TT Desc

TT Desc

9

10

“Ranking” column is not displayed by default.

To display column, click “Ranking” box to add checkmark and “Up Rank/Del Rank” column will display in the upstream grid and “Dn Rank/Rec Rank” column will display in the downstream

grid.

When no rank is entered, system defaults rank to 500. Rank 999 is lowest priority and 1 is highest.

TT Desc

TT Desc

10

11

“Package ID” column is not displayed by default.

To display column, click “Package ID” box to add checkmark and “Pkg ID” column will display in the upstream and downstream grid.

TT Desc

TT Desc

11

12

“TT Desc” is selected for each nomination.

The “teal” columns represent updatable fields.

There are different updatable columns depending on TT Description selected.

12

13

TGP Transaction Type Descriptions

14

FTA (including Authorized Overrun)

SA Pool

Alternative Pooling Locations

Storage Withdrawal

Basic Business Examples

FTA “Non-threaded” Nomination

Receipt PIN (412781) Hollow Road to Delivery PIN (021046) Owego Stagecoach

15

Svc Req K - 12345-FTATGP

PRIM RECEIPT POINT IN BLUE – TQ=4,000

PRIM DELIVERY POINT IN RED - TQ=4,000

16

412781 SWEPI/TGP-Hollow Road Dehd 835354

FTA Nomination at Receipt PIN (412781)

00001 (GID Number) ABC Company (Company Name) 000000001 (Serv Req Duns )

4,021 0

Running nomination total. Variance is displayed if PIN is not balanced.

4,021

Downstream quantity has not been entered. PIN must be balanced before submitting.

16

17


FTA Nomination at Receipt PIN (412781)


4,021 4,021

PIN is in balance. Variance = 0.

0

Downstream quantity has been entered.

17

“GO” takes you directly to other PIN.

18

421046 Central NY/TGP-Owego S 542523

FTA Nomination at Delivery PIN (021046) before downstream information is entered .


4,000 0

18

4,021

Downstream quantity has not been entered. Delivery PIN is not balanced.

All of the Upstream data auto populated from Receipt PIN.

19


FTA Nomination at Delivery PIN (021046)


4,000 4,000

19

Up ID Prop = GID Number

FTA “Non-threaded” Nomination

Receipt PIN (412781) Hollow Road to Delivery PIN (021046) Owego Stagecoach

20

Svc Req K - 12345-FTATGP

PRIM RECEIPT POINT IN BLUE – TQ=4,000

PRIM DELIVERY POINT IN RED - TQ=4,000

Add 1,000 dths of AO

Authorized Contract Overrun is nominated as a separate transaction.

21


AO FTA Nomination at Receipt PIN (412781)


5,026 5,026 0

21

Increased previously nominated supply 4,021 to add 1,005 AO qty.

Authorized Contract Overrun is nominated as a separate transaction.

22


AO FTA Nomination at Delivery PIN (021046)


5,000 5,000

22

SA Pool “Non-threaded” Nomination

23

Receipt at PIN -410173 (Sun Plant Dehyd) and Delivery out of Pool PIN – 405345 (Zone 0 100 Leg South Pool)

8XXX1 - SATGP Delivery 405345

Receipt 410173

Up ID 222222222

Oil Company

Up ID 111111111

Gas Company

Down ID 444444444

TX Company

Down ID 333333333

USA Company

SA contracts will only be used to nominate from wellhead (physical receipt) to Pool PIN.

Buys from/Sells to a Pool PIN do not need an SA contract.

24

410173 ETP PGE TX/TGP – Sun Plant 40866

SA Pool Nomination from wellhead at Physical Receipt PIN


Use Up/Dn Pkg ID. Viewed at Conf Level.

TT Desc

TT Desc

TT Desc TT Desc

24

SA contracts are only used when nominating from wellhead (physical receipt) to the Pool PIN.

25

405345 /TGP – Zone 0 Leg 100 South 917716

SA Pool Nominations to Delivery Pool PIN


TT Desc

TT Desc TT Desc

Buys from/Sells to a Pool PIN do not need an SA contract .

25

Alternative Pooling Locations “Non-threaded” Nomination

26

Associate Physical PIN (420072) in Zn 4 300 Leg to the Pool PIN (420867) in Zn 4 200 Leg

In DART, meters can be associated with multiple pools. Customers no longer need to use an IT contract with TT 08 to nominate to an alternative

pooling location.

27

420072 Nat Fuel Supply/TGP - Lamont 18815

Alternative Pooling Nomination at Receipt PIN (420072)


6,110 6,110

27

28

420867 TGP/Zn 4 200 leg pool 223371

Alternative Pooling Nomination at Delivery Pool PIN (420867) Zn 4 200 Leg


6,110 6,110

TT Desc

Multiple contracts used to transport gas away from the Pool PIN.

PIN level provides a view of all relevant nomination data and allows submittal across contracts.

28

29

421022 PSEG/TGP -Glenmont 384407

Alternative Pooling Nomination at Delivery Pool PIN (421022) Glenmont


2,094 2,094

29

30

412181 Iroquois /TGP-Wright 68174

Alternative Pooling Nomination at Delivery Pool PIN (412181) Wright


3,970 3,970

30

Storage Withdrawal “Non-threaded” Nomination

31

One storage PIN used to nominate injections/withdrawals.

Example: PIN 460020 – Portland Storage

TT Desc is used to distinguish Storage Injection or Storage Withdrawal.

Storage Portland Receipt PIN (460020) to Delivery PIN (420118)

32

460020

Storage – Portland Receipt PIN (460020) Nomination


TGP/Storage Portland 139407

20,000 20,000

32

33

420117

Delivery PIN (420117) Nomination


Boston/TGP – Lynn Mass 125643

5,000 5,000

33

34

Extended Delivery Service (EDS)

FTA (before CDP/after CDP)

FAQs about balancing and nominating PINs

Other Business Examples

Extended Delivery Service (EDS) “Non-threaded” Nomination

35

ABC Company Contract 56789-FTATGP has Contract Path rights in Zone 4 and would like to nominate EDS to PIN 420101 –Transco/TGP Rivervale in Zone 5 300 Leg.

EDS/ERS is nominated straight to the extended physical receipt and/or delivery PIN

412769 Appalachia/TGP-Evanchick Dehd – 5,000

420914-Dominion/TGP-Sabinsville - 5,000

420101 Transco/TGP-Rivervale

36

412769 Appalachia/TGP-Evanchick 780335

EDS Nomination at Rec PIN 412769


5,000 5,000

EDS/ERS is nominated straight to the extended physical receipt and/or delivery PIN . In this example - PIN 420101 in Zone 5 300 Leg

36

37

420101 Transco/TGP-Rivervale 14129

EDS Nomination at Delivery PIN 420101 in Zn 5 300 Leg


5,000 5,000

37

FTA (before CDP/after CDP) “Non-threaded” Nomination

38

ABC Company nominates to 3 delivery PINs confirmed by Mandalay Industries Mandalay Industries decides to get set with a (CDP) to aggregate the 3 PINS into one logical (PIN).

39

420867 TGP/Zn 4 200 Line Pool 223371

Nomination Before CDP PIN


1,500 1,500

3 PINS confirmed by Mandalay Industries

39

40

420867 TGP/Zn 4 200 Line Pool 223371

Nomination After CDP PIN was utilized.


1,500 1,500

Nominating to CDP reduced the number entries

40

41

FAQS ABOUT BALANCING AND NOMINATING PINS

Q. How do you manage nominations for the same customer submitting at the same time and prevent overwriting each other? (Ex. One nominates Supply and other Transport) A. DART prevents overwrites by sending a notification to the last submitter, to re-submit, because there are other batches “validating” the same points. Scheduler can then see updated activity and rebalance nomination if necessary and resubmit.

42

Q. What if we are still waiting on one or two counterparties close to the nomination deadline, do we have to submit everything at the last minute? A. No. Nominations can be submitted in batches. Ex. Submit one batch with completed transactions, then create a second batch with pending information and save in “work in progress” until complete information is received to nominate.

43

Q. What if we buy from multiple parties and deliver to multiple markets, do we have to wait until all the points are balanced before we can submit our nominations? A. No. DART provides a mechanism for customers who need to balance their pool due to late changes within a cycle. - Customer can nominate a payback transaction as a placeholder until information is updated before the nomination deadline.

44

45

Contract Path

Supply

Market

NEW NOMINATION ENTRY SCREENS

46

Expand All box is blank by default. No contract details display.

46

Contract Path Screen

To view contract path details, select Svc Req K from list and click.

Used to create and view all transportation contract paths at once.

47

Used to create and view all transportation contract paths at once.

47

Expand All - Click to add checkmark. Contract details for all contracts in the list will be displayed.

48 48

Click “New” to create another contract and add path details.

49 49

The Upload feature has been added to the DART Batch Locations screen to add efficiency for customers to enter nominations.

Customers can input nominations for all points across all contracts from a single window.

50

Used to create and view all entities where gas is being bought from

NOTE – BUY transactions: •If another shipper has entered a SELL pointing to ABC Company (ex: Oil Company), the line item will appear in the screen with the Counter Prty Nom populated (Similar to View Connecting Entities in Passkey) •ABC Company will just need to enter a quantity to match or another amount if desired •Can also be viewed in the PIN screen

50

Supply Screen

51

Used to create and view all entities where gas is being sold to

51

Market Screen

NOTE – SELL transactions: •If another shipper has entered a BUY pointing to ABC Company (ex: USA Company and TX Company), the line item will appear in the screen with the Counter Prty Nom populated (Similar to View Connecting Entities in Passkey) •ABC Company will just need to enter a quantity to match or another amount if desired •Can also be viewed in the PIN screen

52

DEFINING THE BALANCING LINE ITEMS

“Default Indicator” on the Supply & Market tabs

53

NOTE – BUY transactions: •If another shipper has entered a SELL pointing to ABC Company (ex: Oil Company), the line item will appear in the screen with the Counter Prty Nom populated (Similar to View Connecting Entities in Passkey) •ABC Company will just need to enter a quantity to match or another amount if desired •Can also be viewed in the PIN screen

53

Supply Screen

Customer can select a line item per point to be used as a balancing line for any quantity changes made to the pathed routes from the Contract Path tab.

There can only be one default line item per point (Supply & Market).

54

BATCH LOCATION SCREEN

Existing DART Screen

55

Provides a convenient way of viewing a summary of all activity at once.

55

Batch Locations Screen

DART & PASSKEY Comparison DART PASSKEY Upload - all contracts at once Upload - one contract at a time Pin level view provides enhanced functionality to view all relevant nomination data and submit across contracts in one screen

Ranking across contracts, View connecting data viewed in multiple screens, but can’t nominate from

CDP Option - reduces number of nominating activity N/A

Running nomination total is displayed above the grid as nominations are being created.

Requires navigating to the Totals tab/using SUM button to view running nomination totals, by contract.

The ability to copy a nomination line item will be maintained in the New Nomination Entry screens.

Ability to copy a nomination line item

Capability to use Package ID’s on transport paths as well as Upstream/ Downstream level (upd/dwn visible at the confirmation level)

Package ID only available on transportation.

Added capability to define and set default for balancing line items in the new Supply/Market tab screens.

No auto default for balancing functionality

Counter Party Nomination Qty displayed on the nomination screen

View Connecting Entities is available in multiples screens, but not Nominations.

Batch locations screen provides convenient way of viewing summary of all activity at once.

View summary activity by contract or meter, retrieved one at a time

Need to select TT Desc for each transaction nominated Transaction Type defaults to “01” for all nominations, unless specific TT is selected.

Pool Pins can be associated to multiple Pools. Nominations to alternative Pool PIN does not require using an IT TT08.

Pool Pins cannot be associated to multiple Pools. Nominations to alternative Pool PIN does require using an IT TT08.

EDS/ERS nominations are nominated straight to the extended physical receipt and/or delivery PIN .

EDS/ERS nominations require two nominations to extend to receipt and/or delivery point.

56

57

Questions and Comments

• Email: [email protected]

• Presentation will be available in PASSKEY under Informational Lookups/Presentations

Thank you for your participation in today’s WebEx session!

mailto:[email protected]

www.kindermorgan.com

WEBEX

October 9, 2012

59

APPENDIX

SA Payback from/to TSP “Non-threaded” Nomination

No longer need to point to TGP Duns

60

Payback from/to TSP at PIN (405345)

61

405345 /TGP – Zone 0 Leg 100 South 917716

SA Payback from/to TSP


1,000 1,000 0

Park Service and Park Withdrawal “Non-threaded” Nomination


62

Park and Park Withdrawal at PIN (420867)

63

420867

Park and Park Withdraw at PIN (420867)


TGP/Zn 4 200 leg pool 223371

5,000 5,000

63

Loan and Loan Payback “Non-threaded” Nomination


64

Loan and Loan Payback at PIN (420867)

65

420867

Loan and Loan Payback at PIN (420867)


TGP/Zn 4 200 leg pool 223371

5,000 5,000

65

Storage Injection “Non-threaded” Nomination

66

One storage PIN used to nominate injections/withdrawals.

Example: PIN 460020 – Portland Storage

TT Desc is used to distinguish Storage Injection or Storage Withdrawal.

Storage Portland Receipt PIN (460020) to Delivery PIN (420118)

67

420117

Receipt PIN (420117) Nomination


Boston/TGP – Lynn Mass 125643

5,000 5,000

67

68

460020

Storage – Portland Delivery PIN (460020) Nomination


TGP/Storage Portland 139407

4,825 4,825

68

Bi-directional PIN “Non-threaded” Nomination

69

Nominations at Bi-directional PINs will be on one PIN instead of a separate PIN for receipt and delivery.

EX: current meters 010811/020207 NEW PIN 420207

Example using PIN 420207-

70

420207

Nomination at Bi-directional PIN (4200207)


Transco/TGP-Mahwah NJ 14123

4,021 4,021

70

Nominations are done at one PIN.

Date post:	20-Feb-2021
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

WEBEX October 16, 2012 - Tennessee Gas Pipeline€¦ · October 16, 2012 . 2 Agenda ... 16 412781...

Documents