1
AUCTIONEER’S NOTE: After 18 years in business, Doug and Cate have decided to retire and offer this excellent, late model line of trucks, and equipment. Most pieces have been purchased new with complete service records, and stored inside when not in use. Auctioneers may run two rings. For preview or inspection, please contact Doug Bladow, 701.640.0437. Major equipment begins selling at 11:00 AM. Live online bidding available on major equipment. Registration, terms, & details at SteffesGroup.com TERMS: All items sold as is where is. Payment of cash or check must be made sale day before removal of items. Statements made auction day take precedence over all advertising. $35 documentation fee applies to all titled vehicles. Titles will be mailed. Canadian buyers need a bank letter of credit to facilitate border transfer. WEDNESDAY, FEBRUARY 11 | 10AM Location: 17749 Hwy. 13, Wahpeton, ND From Wahpeton, ND, 3 miles west on Hwy. 13; or from I-29 Exit 23, 7 miles east on Hwy. 13. Steffes Group Inc., 2000 Main Avenue East, West Fargo, ND 58078 | Brad Olstad ND319, Scott Steffes ND81, Bob Steffes ND82, Ashley Huhn ND843, Eric Gabrielson ND890, Randy Kath ND894 | 701.237.9173 | SteffesGroup.com 2015 Peterbilt 365, MX13 Paccar, 455 hp., Allison automatic, engine brake, Chalmers susp., quad locking axles, (3) air up/down steerable pushers, 18’ Oxbody gravel body with Maxle Super Dump axle, 4:30 ratio, 425/65R22.5 front tires, 255/70R22.5 pusher tires, 11-22.5 rear tires, aluminum rims, 6,534 miles 2015 Peterbilt 365, MX13 Paccar, 455 hp., Allison automatic, engine brake, Chalmers susp., quad locking axles, (3) air up/down steerable pushers, 18’ Oxbody gravel body with Maxle Super Dump axle, 4:30 ratio, 425/65R22.5 front tires, 255/70R22.5 pusher tires, 11-22.5 rear tires, aluminum rims, 8,636 miles 2007 Kenworth T800 tandem axle Super Dump, C13 Cat, 470 hp., Allison automatic, engine brake, Chalmers susp., triple steerable pusher axles, 18’ Strong Industries gravel box, 250” WB, 4:30 ratio, 425/65R22.5 front tires, 215/75R17.5 pusher tires, 11-22.5 rear tires, aluminum rims, 311,100 miles 2006 Peterbilt 379 tandem axle, C13 Cat, 430 hp., 8LL trans., quad locking axles w/air up/down steerable pusher axle, engine brake, Air Trac air ride, 16’ Bibeau gravel box, full locker, 240” WB, 3:90 ratio, 385/65R22.5 front tires, 255/70R22.5 pusher tires, 295/75R22.5 rear tires, aluminum rims, 50,916 miles, single owner 1998 Peterbilt 378, 3406 Cat, 475 hp., 13 spd., engine brake, low air leaf air ride, 16’ gravel box, pintle hitch, rear hyd., 3:55 ratio, 11-24.5 tires, front aluminum and rear steel rims, 850,500 miles, recent engine OH, used to pull pup trailer 2007 Peterbilt 386, tandem axle, 70” sleeper, double bunk, C15 Cat, 475 hp., 18 spd., engine brake, Peterbilt flex air ride, air slide 5th, cruise, dual aluminum tanks, diff lock, 3:36 ratio, 11R22.5 tires, aluminum wheels, 602,340 miles 2007 Kenworth W900 tandem axle, factory day cab, C13 Cat, 470 hp., 13 spd., engine brake, AG380 air ride, SS air cleaner, dual exhaust, dual aluminum fuel tanks, 1-line wet kit, 220” WB, 11-22.5 tires on aluminum rims, 200,740 miles, single owner 2005 Peterbilt 385 tandem axle, day cab, C13 Cat, 410 hp., 10 spd., engine brake, Air Trac air ride, air slide 5th, dual exhaust, dual aluminum tanks, full locker, 3:70 ratio, 285/75R24.5 tires, aluminum rims, 370,894 miles 2005 Peterbilt 379 tandem axle, ext. hood, day cab, C15 Cat, 475 hp., 13 spd., engine brake, low air leaf air ride, air slide 5th, dual exhaust, air up/ down steerable pusher, diff lock, 222” WB, 3:55 ratio, 11-22.5 front tires on aluminum, 255/70R22.5 pusher axles tires on aluminum, 11-22.5 rear tires w/ aluminum outside rims, 602,710 miles 2005 Peterbilt 379 tandem axle, day cab, C13 Cat, 475 hp., 13 spd., engine brake, low air leaf air ride, dual exhaust, dual air cleaners, dual fuel tanks, 2-line wet kit, air up/ down steerable pusher axle, 260” WB, 3:42 ratio, 11-22.5 front tires, 255/70R22.5 pusher tires, 11-22.5 rear tires, aluminum rims, 530,410 miles 2005 Peterbilt 379 tandem axle, day cab, C13 Cat, 430 hp., 13 spd., engine brake, low air leaf air ride, air slide 5th, air up/ down steerable pusher axle, diff lock, dual exhaust, 244” WB, 3:70 ratio, 11-22.5 tires on aluminum rims, 370,595 miles 2001 Peterbilt 378 tandem axle, day cab, C12 Cat, 410 hp., 13 spd., low air leaf air ride, air up/down steerable pusher axle, dual exhaust, dual fuel tanks, aluminum headache rack, 2-line wet kit, 244” WB, 3:55 ratio, 11-22.5 front & rear tires, 255/70R22.5 pusher tires, aluminum wheels, 718,886 miles 2001 Peterbilt 357 tandem axle, day cab, C12 Cat, 430 hp., 13 spd., engine brake, air ride, air slide 5th, 2-line wet kit, air up/down steerable pusher axle, 224” WB, 4:11 ratio, 285/75R24.5 front tires, 255/70R22.5 pusher tires, 11-22.5 rear tires, aluminum rims, 519,660 miles, complete New engine 1998 Peterbilt 379 tandem axle, day cab, 3406B Cat, 435 hp., 13 spd., engine brake, air ride, air slide 5th, dual exhaust, 2-line wet kit, 220” WB, 3:55 ratio, 11-22.5 tires, outside aluminum rims, 938,600 miles, complete engine OH recently 2010 Peterbilt 365, ISM Cummins, 350 hp., 8LL spd., Chalmers susp., quad locking axles w/air up/down steerable pusher axle, full locker, Con-Tech Bridgemaster 11 yd. mixer, 4:78 ratio, 425/65R22.5 front tires on aluminum rims, 255/70R22.5 pusher tires, 11-22.5 rear tires on steel rims, 69,660 miles, single owner 2006 Kenworth W900L, ISM Cummins, 350 hp., 8LL trans., quad locking axles w/air up/down steerable, McNeilus Bridgemaster 11 yd. mixer, 425/65R22.5 front tires on aluminum, 255/70R22.5 pusher tires, 11-22.5 rear tires on steel, 142,700 miles, single owner 2005 Kenworth W900L, ISM Cummins, 350 hp., 8LL trans., quad locking axles w/air up/down steerable pusher axle, full locker, McNeilus Bridgemaster 11 yd. mixer, 425/65R22.5 front tires on aluminum rims, 255/70R22.5 pusher tires, 11-22.5 rear tires on steel rims, 115,390 miles, single owner 2005 Kenworth W900L, ISM Cummins, 350 hp., 8LL trans., quad locking axles w/steerable pusher axle, full locker, McNeilus Bridgemaster 11 yd. mixer, 425/65R22.5 front tires on aluminum, 255/70R22.5 pusher tires, 11-22.5 rear tires on steel, 137,300 miles, single owner 1997 Peterbilt 357, 3306 Cat, 300 hp., McNeilus Bridgemaster 11 yd. mixer, air up/down pusher axle, diff lock, 4:63 ratio, 425/65R22.5 front tires on aluminum, 255/70R22.5 pusher tires, 11-22.5 rear tires on steel rims, 151,500 miles 1997 Peterbilt 357, 3306 Cat, 300 hp., McNeilus Bridgemaster 11 yd. mixer, air up/down pusher axle, diff lock, 4:63 ratio, 425/65R22.5 front tires on aluminum, 255/70R22.5 pusher tires, 11-22.5 rear tires on steel rims, 173,000 miles 1997 Peterbilt 357, 3306 Cat, 300 hp., McNeilus Bridgemaster 11 yd. mixer, air up/down steerable pusher axle, 4:63 ratio, 425/65R22.5 front tires on aluminum, 255/70R22.5 pusher tires, 11-22.5 rear tires on steel rims, 157,800 miles 1995 Peterbilt 357, 3306 Cat, 300 hp., McNeilus Bridgemaster 11 yd. mixer, air up/down pusher axle, 5:29 ratio, 425/65R22.5 front tires on aluminum rims, 255/70R22.5 pusher tire on aluminum rims, 11-22.5 rear tires on steel rims, 166,000 miles, New drum, gear box & hyd. pump 2001 Mack tandem axle pumper truck, E7 Mack, 9 spd., air up/down steerable 3rd pusher axle, spring ride, 32M Zboom, custom-made insulated pipe wraps, 220” WB, 425/65R22.5 front tires, 385/65R22.5 pusher tires, 11-22.5 rear tires, aluminum rims, 1,317 pump hrs., 4,105 engine hrs., 112,140 miles, new pipe in 2008, single owner Approx. 400’ asst. size extra pipe, hose, & clamps for Mack pumper truck 2007 Sterling Condor tandem axle cabover, C13 Cat, 430 hp., Allison automatic, Haulmax susp., Putzmeister TB80 conveyor, feeder belt replaced 56 hrs. ago, 856 total belt hrs., 258” WB, outriggers, self-contained washer, 425/65R22.5 front tires, 11-22.5 rear tires, aluminum wheels, 30,200 miles, single owner 2007 Sterling Condor tandem axle cabover, C13 Cat, 430 hp., Allison automatic, Haulmax susp., air up/down steerable pusher axle, Putzmeister TB110 conveyor, 1,904 belt hrs., outriggers, self-contained washer, 298” WB, 425/65R22.5 front tires, 275/70R22.5 pusher tires, 11-22.5 rear tires, aluminum rims, 45,000 miles 2000 Ford F750 single axle, 3126 Cat, 6 spd., spring ride, Putzmeister TB50 conveyor, 1,140 belt hrs., concrete hopper, self-contained washer, 264” WB, 11-22.5 tires, outside aluminum rims, 87,900 miles, single owner 2011 R-Way quad axle belly dump, 51’, tarp, air ride, air up/down rear (2) axles, 33 ton cap., 385/65R22.5 Super Singles on aluminum rims, single owner 1E9BF51H8BS448339 2009 R-Way quad axle belly dump, 51’, tarp, air ride, air up/down rear (2) axles, 33 ton cap., 385/65R22.5 Super Singles on aluminum rims, single owner 2009 R-Way quad axle belly dump, 51’, air ride, air up/down rear (2) axles, 33 ton cap., 385/65R22.5 Super Singles on aluminum rims, single owner 2007 Sidump’r SDR325 tri-axle trailer, 36’, air ride, 11R22.5 tires on steel rims, single owner 2005 Sidump’r SDR325 tri-axle trailer, 36’, air ride, air load scale, 11R22.5 tires on steel rims, single owner, New main cyl. 2003 Midland SK2100 tandem axle pup trailer, 14’ gravel dump box, 19-1/2’ pole, spring ride, 11-24.5 tires on steel, single owner 2011 Jet drop deck, 53’, 5’ beavertail, flip ramps, spread axle, air ride, dump valve, 5’ aluminum box, sliding winches, 255/70R22.5 tires on steel rims, single owner 2007 Jet drop deck, spread axle, 53’, 5’ beavertail, flip ramps, air ride, dump valve, sliding winches, 5’ aluminum box, 255/70R22.5 tires on steel rims, single owner 2008 Terex Load King RGN tri-axle trailer, non-ground bearing, 55 ton, air ride, 26’ well, hyd. detach, 102” swing out, air up/down (3) axles, plumbed for stinger, no pony motor, custom-built fenders, 255/70R22.5 tires on steel rims, single owner 2005 Caterpillar 950G II wheel loader, heat, A/C, ride control, engine block heater, 4.5 yd. bucket, VEI scale, 23.5-25 tires, 4,585 hrs., S/N0950GJAYL02067 Large hopper for Putzmeister telebelt, custom-built for wheel loader w/vibrator 2007 Caterpillar D6K LGP dozer, 6-way 11’ blade, AccuGrade ready, 30” pads, 3,613 hrs., S/NCAT00D6KEDHA00309 2002 Caterpillar 730 articulating dump truck, C11 Cat, 300 hp., heat, A/C, engine block heater, Michelin 750/65R25 tires at 90%, 5,582 hrs. 2008 Caterpillar 320DL excavator, 2 spd. travel, engine block heater, aux. hyd. on boom, hyd. quick coupler, 48” heavy duty bucket w/teeth, 1,686 hrs., single owner, S/NCAT032DDJPHX01186 2010 Solesbee hyd. thumb for 320 excavator, single owner Smooth cutting bucket, 72”, for 320DL excavator, single owner 2011 Caterpillar 305.5D CR mini excavator, enclosed cab, heat, A/C, aux. hyd., 24” bucket, long stick, 2 spd. travel, mechanical coupler, 338 hrs., single owner Bucket, 36”, for Caterpillar 305.5D CR 2005 Caterpillar 305CR mini excavator, open station, aux. hyd., 24” bucket, 2 spd. travel, mechanical quick coupler, 1,651 hrs., complete New engine w/115 hrs., S/NCAT00305V0GT01673 2009 Caterpillar H550 hammer concrete breaker, custom-built metal rack, fits 2005 Caterpillar 305 mini excavator, single owner 2011 JLG 450AJ Series II boom lift, diesel, 45’, 4WD, cold start, generator, 33-15.5-16 tires, 726 hrs., S/N300146904 2003 Caterpillar 420D tractor loader backhoe, 4WD, cab, heat, extend-a- hoe, 1.4 yd. bucket, 30” bucket, 19.5-24 tires, 340/80R18 tires, 1,812 hrs., S/NCAT0420DPFDP09997 2013 JD CT323D track skid steer loader, cab, heat, engine block heater, foot controls, 2 spd. travel, quick tach, 84” bucket, 389 hrs., single owner, S/N1T0323DBHDG240934 2013 JD CT323D track skid steer loader, cab, heat, engine block heater, foot controls, 2 spd. travel, quick tach, 84” bucket, 338 hrs., single owner, S/N1T0323DBCDG240967 (2) Small hoppers for Putzmeister telebelt, custom-built for skid steer loaders 2000 Worksite Pro HB50 hyd. concrete breaker, skid steer loader mount, single owner McMillen posthole auger, skid steer loader mount, flat-face hyd. couplers w/15” bit 24” bit for hyd. posthole auger Virnig rock grapple, 84”, 6” space, 2 hyd. cyl. on grapple, skid steer loader mount, single owner Skid steer loader snow bucket, 6’ (2) Sets pallet forks w/backrest, for skid steer loaders Pallet forks, for skid steer loader (3) Quick tach hitch movers, for skid steer loaders 1998 Caterpillar CS433C smooth drum roller packer, 66” drum, vibrator control, 14.9-24 tires, 1,975 hrs., S/N5HK65166 1996 Caterpillar CP433C sheep foot roller packer, EROPS, vibrator control, leveling blade, 66” drum, 14.9-24 tires, 2,614 hrs., S/N5HK31094 2012 Hamm HD12VV smooth roller packer, double smooth 48” drum, center lift point, 92 hrs., single owner, S/NH2002602 2012 Hamm HD12VV smooth roller packer, double smooth 48” drum, center lift point, 121 hrs., single owner, S/NH2002597 2012 Hamm HD12VV smooth roller packer, double smooth 48” drum, center lift point, 144 hrs., single owner, S/NH2002128 2013 VIS robotic wheel polisher, 480v, 3 phase, 293 hrs. 2007 Peterbilt 335 single axle, C7 Cat, 330 hp., 10 spd., engine brake, spring ride, diff lock, 14’ Curry Supply mechanics service body, Autocrane Titan Model 10006H crane, hyd. outriggers, 275 gal. fuel tank w/high output pump & hose reel, Bobcat welder/generator w/95 hrs., hyd. drive air compressor, complete set mechanics tools, 4:78 ratio, 11-22.5 tires, aluminum outside rims, 6,395 miles, single owner 2000 Peterbilt 357, C12 Cat, 395 hp., 8LL trans., engine brake, quad locking axles w/air up/down pusher axle, 22’ flatbed, IMT 52’ knuckle boom crane, max. 10,000 lb. lift, pintle hitch, (2) toolboxes, 4:11 ratio, 385/65R22.5 front tires on aluminum rims, 11-22.5 rear tires on steel rims, 40,450 miles, single owner 1998 Peterbilt 357 tandem axle water truck, M11 Cummins, 330 hp., 8LL trans., Chalmers susp., 232” WB, 4,000 gal. water tank, front, side, & rear sprayers, hose reel on back, 5:38 ratio, 11-22.5 tires on steel, 425/65R22.5 tires on aluminum, 131,000 miles 1990 Peterbilt 379 single axle, 3176 Cat, 325 hp., 13 spd., air ride, SS air cleaners, dual aluminum fuel tanks, 4,000 gal. SS tank w/hyd. lift hoist, HydroVac water vac system, 222” WB, 3:36 ratio, 11-22.5 tires, aluminum wheels, 460,000 miles 2009 IHC 4300 single axle, DT466, 250 hp., Allison automatic, air ride, 30’ van body, translucent roof, hyd. lift gate, warehouse racking, roll-up door, 275” WB, 11R22.5 tires, outside aluminum rims, 292,650 miles, doesn’t require CDL 1998 IHC 8100, M11 Cummins, 280 hp., 9 spd., spring ride, 24’ van body, roll-up door, 256” WB, 11-22.5 tires, steel rims, 515,732 miles 2011 Ford F450 crew cab dually, 6.7 liter Powerstroke diesel, automatic, 2WD, 9’ flatbed w/lumber rack and toolboxes, electric trailer brakes, 225/70R19.5 tires, 51,500 miles, single owner 1991 IHC 4900 single axle, DT466 diesel, 7 spd., 14’ Frontier contractor body, fold-down sides, spring ride, pintle hitch, rear air, 190” WB, 11-22.5 tires on steel rims, shows 253,000 miles 2008 GMC Sierra, 1/2 ton, reg. cab, 5.3 liter, automatic, 4WD, 8’ box, Rhino lining, 75,000 miles, single owner 2008 GMC Sierra, 1/2 ton, reg. cab, 5.3 liter, automatic, 8’ box, Rhino lining, 102,000 miles, single owner 2007 GMC 1 ton dually, crew cab, Duramax 6.6 liter, automatic, 2WD, flatbed w/lumber rack & toolboxes, 87,900 miles 2000 Chevrolet, 1/2 ton, 5.3 liter gas, automatic, 4WD, 154,880 miles 1993 Fruehauf dry van, 53’, air ride, tandem slider, lights, converted into insulated job trailer w/warehouse racking, 250 gal. LP tank, Reznor 50,000 BTU heater, 11-22.5 tires on steel Enclosed dry van, 40’, storage only 2008 ABU tandem axle bumper hitch tilt bed trailer, electric brakes, toolbox, single owner 2006 ABU tandem axle deckover pintle hitch trailer, 20’, dovetail ramp, electric brakes, toolbox, single owner 2001 ABU tandem axle deckover pintle hitch trailer, 20’, dovetail flip-up ramps, pop-up rear deck, electric brakes, toolbox, single owner 2011 Jensen tandem axle bumper hitch enclosed trailer, 18’, 4’ side door, fold-down ramp door, electric brakes, single owner 1998 Fechtner heavy duty tandem axle bumper hitch trailer, 16’, Knaack toolbox, single owner 1998 Jensen tandem axle bumper hitch enclosed trailer, 24’, electric brakes, rear swing doors, 4’ side door, racking inside, single owner 2006 United enclosed V-nose tandem axle trailer, 12’, with Maxforce 3330 basement waterproof spray system, 3/8”x150’ psi heavy duty hose, 31 hrs., single owner (2) 2013 Barracuda XJ6 concrete grinders, 230v, 3 phase, single owner, S/N758, S/N757 (2) 2013 IPC Eagle pulsating vacs, 4-wheel carts, gauges, 15’ hoses, 220v, 1 phase, single owner, S/N25054, S/N25055 2013 XPS PB-1050 turbo vac, 16 gal. tank, 140 cfm, single owner, S/N10503760 2014 Genie edging grinder, DeWalt grinder, single owner 2013 Machine Mach I Genie grinder polisher, 220v, 1 phase, single owner, S/NXPSCG500-E001 2013 Pioneer Eclipse Cleanstar 20 scrubber, battery w/charger, single owner, S/N130100191 2013 Pioneer Eclipse burnisher, 28”, LP power, single owner, S/N76204 Inventory of polishing diamonds, resins & burnishing pads (3) Spools 150’ wire, 3 phase w/couplers & cart 150’ cord, 220v, 1 phase 300’ ext. cord, 12-3 w/spool Junction box, 220v, 3 phase, single owner (2) Crusader high volume air fans, single owner DeWalt grinder, 7”, single owner Metobo handheld grinder, 7’ w/dust hood, single owner 2014 JD 4720, open station, eHydro, 1 hyd., aux. rear hyd., 3 pt., 540 PTO, front weight pkg., 27-10.5-15 front turf tires, 44-18:00-20 rear turf tires, 65 hrs., single owner, S/N1LV4720HKDH916496 Trimble GL622 laser transmitter, tripod, grade stick (2) Trimble GL522 laser transmitters, tripods, grade sticks Trimble Leica Rugby 320SG laser transmitter, tripod, grade stick 2010 Level Best LB-D8 grading box, 8’, Cat I or II, receivers, control box, complete, single owner, S/N1750 Hammond box blade, 7’, hyd. lift 2002 ProTech snow pusher, 16’ 2013 Polaris Ranger Crew 800 EFI, manual dump box, receiver hitch, Pro Comp 26/9:00R14 tires on aluminum rims, 786 miles CNH quick hitch, Category II, 3 pt. JD “I” Match quick hitch, Category I, 3 pt. Work platform, 12’, for forklift Wacker PT2 pump, 2”, Honda 5.5 hp. motor, suction & discharge hose Dewalt DG4300 gas power generator, wheels & handles, Honda 8 hp. motor Honda EM3500S gas generator, Honda motor, wheels & handles (2) 110 gal. fuel service tanks, Gasboy 12v pumps Poly tanks, 130 gal. & 500 gal. 2006 Caterpillar XQ80-2 gen set, 3054C engine, 100 kva/80 kw, 4,681 hrs., on Migs tandem axle trailer, S/N00C44CXYC00563 2005 Baldor Pow’R Lite light plant, Lombardini diesel motor, 6 kw, (4) 1000 watt lights, on trailer, 782 hrs., single owner (2) Thawzall ground heater trailers, diesel, EM200 boiler, (5) 500’ zones, hose w/power reel Somero S-15M concrete laser screed, Kubota diesel, (4) spare smooth tires on rims, 65 hrs., single owner Morrison screed, 42-1/2’ w/hyd. winch on each end, Honda GX160 motor Morrison screed, 40’ w/hyd. winch on each end, Honda GX160 motor MBW power screed head Black Beauty screed power heads w/(4) aluminum screeds (3) 2” screed pipes, 15’, 18’, 21’ MBW walk-behind plate compactor, Honda gas motor MBW plate compactor, Honda GX160 motor Multi-Quip MVC-88VHG plate compactor, Honda GX160 motor Multi-Quip Mikasa plate compactor, Honda GX160 motor Wacker BS600 jumping jack packer, 2 stroke Wacker BS600 jumping jack packer, 4 stroke MBW jumping jack packer, Honda 4 stroke motor (4) Neuson Wacker BS60-2I jumping jack packers, 2-stroke motors 2010 Wacker Neuson CRT36-26A ride-on overlapping power trowel, double 36”, Honda GX690 engine, 95 hrs., S/N5951857 2007 Wacker CRT36-24A-E ride-on overlapping power trowel, double 36”, Honda 24 hp., 119 hrs., S/N5737310 2001 Wacker CRT48-25K-H ride-on overlapping power trowel, double 48”, Kohler 25 hp. motor, 1,775 hrs., S/N5264988 Bartell B436 walk-behind power trowel, 36”, Honda 5.5 hp. Bartell B424 walk-behind power edging trowel, Honda GX120 motor (2) Bartell walk-behind power trowels, 36”, Honda 5.5 hp. motor MBW walk-behind power trowel, 46”, Honda 8 hp. motor Multi-Quip J36H55 walk-behind power trowel, 36”, Honda GX160 motor Multi-Quip walk-behind power trowel, Honda GX160 motor Multi-Quip walk-behind power trowel, 46”, Honda GX270 motor Terex walk-behind power trowel, Honda 5.5 hp. motor MK MK9000 Series concrete saw, New Honda GX390 motor Diamond Products CC1300 core cut saw with Honda GX390 motor (2) Husqvarna K760 cut off saw, gas (2) Husqvarna K750 cut off saw, gas Husqvarna 150 Prowler Soff Cut saw, Robin 4.5 hp. motor Jet pneumatic jack hammer, 90 lb., (2) pts. (2) Little Giant pull wagon, 3’x6’, pneumatic tires (2) Little Giant pull wagon, 30”x4’, pneumatic tires (2) Work Pro 150 power buggies, Honda 8 hp. Benner Nawman Diamond DBD-25H portable rebar bender Chicago Pneumatic pneumatic jack hammer, 90 lb., (2) pts. (2) Allen concrete curing sprayers, Honda 5 hp. motors, 100’ hoses, on custom stands Rebar cutter & bender (2) Concrete sprayers, w/hoses & reels, used for form oil (2) Pex tubing uncoilers (4) Rehau tubing staplers w/New boxes of staples (2) 48” poly roll applicators w/(7) rolls New poly Gas & electric concrete vibrators Misc. concrete tools including: floats; handles; brushes; knee pads; wire tie guns; misc. hand tools; trowels; edgers; Max cordless rebar tie guns; Hilti hammer drills; cordless drills; stake pullers; rebar benders & cutters; levels; tape measures; chalk lines; rebar chairs; handheld pneumatic hammers; etc. Complete 2’ bin form kit, (23) 10’x2’ forms, (40) 30” stakes, (82) 3’ stakes, cables, & come-alongs w/custom rack (18) Bin forms, 10’x16” w/custom rack (20) Ellis scaffold brackets for concrete wall forms (8) Racks Ellis 4’ hinged wall corners (12) Racks Ellis 2’x4’ wall forms (3) Racks Misc. Ellis filler panels (2) Racks Ellis 2’x5’ wall panels Rack Ellis misc. wall panels (2) Racks aluminum misc. filler wall panels (8) Racks of aluminum wall forms, 36”x8’ Aluminum wall forms including: 8”, 10”, 12” & 16” (4) Sets 8’ pre-formed corners (4) Sets 8’ hinged corners (6) Ellis inside corners, 6”x4’ Ellis wall forms, 8’ Asst. Ellis wall forms Misc. Ellis support pieces Box forms to include: 16’x2’, 16’x18”, & other misc. 18” Asst. metal forms, 10’x6”, 10’x12” Flat metal form stakes, 2’ (250) Turnbuckles for concrete forms Misc. round metal stakes for forms Asst. pins & wedges for aluminum wall forms (40) Wall support turnbuckles (57) Insulated concrete blankets, 12’x25’ Large amount wood stakes: 1”x3”x3’; 1”x3”x2’; 2”x4’x2’, New and used Asst. rebar, 20’ & 40’, #8, #6, & #4 Large asst. 16’ lumber for forms including: 2x4; 2x6; 2x8; 2x10, new and used Asst. CDX & laminated plywood sheets & other misc. plywood 2005 Atlas Copco XAS97 air compressor, 185 cfm, JD diesel, dual line hookup, 346 actual hrs., S/N23115 Brute sandblaster Craftsman air compressor, 25 gal., 5 hp., 110v DeWalt Emglo air compressor, 15 gal., 1.8 hp., 110v, on wheels Quincy air compressor, Honda GX390 electric start motor, hose reel, on skid with fork pockets Allied Mfg. pressure washer, fuel oil fired, electric pump, hose reel less hose (2) DeWalt DWS780 miter saws, 12”, w/Model DWX7232 stand DeWalt DW744 table saw, on stand Industrial Air electric air compressor, 110v, single owner Jet pallet jack Jet shop hoist (3) Jet chain hoists Safety Speed Mfg. vertical panel saw, Milwaukee power saw (3) Master BLP375AT LP heaters Sureflame 51505 heater, 1,000,000 BTU, natural gas or LP, 110v fan, on wheels Clemco 2020 abrasive blast equipment, 4 cyl. cap., on cart Clemco Cap 1 ambient air pump, 3/4 hp., 1 phase, w/hose & hood (2) Crane straps, 40’x8” w/clevices Asst. heavy duty air compressor hoses Asst. tools including: shovels, rakes, scrapers, sledge hammers, saw horses, etc. (2) cord reels, 300’ & 400’ of 110v, 12/3 cord Asst. chains, binders, straps 250 gal. tote of form release oil HQ Tuff-N-Dri 330 gal. tote waterproofing compound Densifier, 45 gal., for concrete polishing Misc. drain tile Asst. float pads, for ride-on power trowels Floor drain grates, 47”x17.5” Asst. 1-1/2” square x14.5” tubing pieces for floor grating (26) Boxes of Max tie wire for rebar tie guns (7) Steel pipe door protectors, 6’ Misc. lengths Pex floor heating tubing Cut-off blades for metal or concrete Reinforced poly rolls, (4) 40’x100’ & misc. sizes Barn fan, 38”, 110v, on wheels Barn fan, 42”, 110v, on wheels Asst. (38) business band radios, programmable, (1) handheld, (2) base stations Asst. truck parts, steps, tanks, etc. Misc. truck tires, 22.5 & Super Singles (4) Michelin 23.5R25 tires GRAVEL TRUCKS SLEEPER SEMI TRACTOR NON-SLEEPER SEMI TRACTORS CONCRETE MIXER TRUCKS PUMPER & CONVEYOR TRUCKS BELLY & SIDE DUMP, & PUP TRAILERS DOZER ARTICULATING DUMP TRUCK EXCAVATOR & ATTACHMENTS MINI EXCAVATORS & ATTACHMENTS BOOM LIFT TRACTOR LOADER BACKHOE PACKERS ROBOTIC WHEEL POLISHER OTHER TRUCKS OTHER TRAILERS TRACTOR GEN SET, LIGHT PLANT, & GROUND HEATERS OTHER CONCRETE EQUIPMENT SHOP EQUIPMENT DROP DECK & RGN TRAILERS TRACK SKID STEER LOADERS & ATTACH. CONCRETE GRINDING & POLISHING EQUIP. SCREEDS COMPACTORS & PACKERS TROWELS FORMS & RELATED EQUIPMENT WHEEL LOADER PICKUPS LASER EQUIPMENT OTHER EQUIPMENT INVENTORY & MISC. ITEMS
