Weekly Job Posting List Week of February 27 – March 3, 2017
The Office of Career Services acts as a clear inghouse for job opportunit ies and is not involved in the
screening or placement of any Northeast State Community Col lege student. The col lege expects al l
sponsoring organizations to comply with al l state and f ederal laws and regulations, including but not
l imited to Tit le VII, Equal Employment Opportunity laws, Fair Labor Standards, Workers’ Compensation
laws, and the American with Disabi lities Act.
Northeast State Community College does not make representati ons or the guarantee of any position
posted. I t is the responsibi lity of the job seeker to research the integrity of companies in which they are
applying. Please take al l necessary precautions into consideration when applying, interviewing, and/or
accepting posit ions from employers. Northeast State Community Col lege and the Career Services staff
assume no liabi lity for acts of omissions by third parties or for mater ial supplied by them.
Available positions page Bonefish Grill – Staff Members ..................................................................................................................... 2
Cabela’s – Retail Sales Outfitter .................................................................................................................... 2
Northern Tool – Service Technician .............................................................................................................. 4
NFS – Technical Support Position ................................................................................................................. 5
Talent Recruiter ............................................................................................................................................ 6
Assistant Director of Childcare...................................................................................................................... 7
Part-Time Employees – LSO Final Mile ......................................................................................................... 7
Summer Positions – Warrior’s Path .............................................................................................................. 8
Industrial Technician ..................................................................................................................................... 8
Pipe Fitter ...................................................................................................................................................... 9
Pipe Welder ................................................................................................................................................. 11
Bookkeeper/Accounting Position ............................................................................................................... 13
Maintenance Tech- 2nd shift ........................................................................................................................ 13
Industrial Mechanic .................................................................................................................................... 16
Drafting Technician ..................................................................................................................................... 16
Software Analyst/Engineer ......................................................................................................................... 17
Bonefish Grill – Staff Members
Bonefish Grill Johnson City, TN
Is looking for energetic pleasant staff to add to the team.
Our culinary department builds knowledge of sanitation, production and execution while having fun
with peers and showing our guests of the Tri-Cities a great place to eat, drink and be with friends.
HOW TO APPLY
If interested please apply online Bonefishgrill.com/careers/hourly
Post Date: 02/27/2017
Cabela’s – Retail Sales Outfitter
Retail Sales Outfitter – Full Time and Part Time
Location: Cabela’s Bristol, VA Department: Various
Reports To: Sales Coaches
Become a part of the World's Foremost Outfitter team! At Cabela's we passionately serve people who
enjoy the outdoor lifestyle by delivering innovation, quality and value in our products and service.
Live...Dream... Work the Adventure! Cabela’s has an opening for a at our retail store.
Position Overview:
Provide a legendary customer service experience for every customer by engaging customers with rich,
relevant experience, showcasing expertise for Cabela’s exceptional products, and providing insight to
the excellent value of the experiences and memories to be made in the outdoors now and in the future.
May be assigned to any one of the following areas: hunting, fishing, camping, footwear, clothing, gifts,
general store, archery, marine or bargain cave.
Essential Job Functions:
• Provide legendary customer service every time by assisting customers in making buying
decisions by identifying and evaluating customers' needs, and making product
recommendations based off of this analysis, by providing a legendary customer experience
for every customer and promoting Cabela's programs including, but not limited to CLUB
Membership, Kiosk, VOC and In-Store Pick-up.
• Assure visual presentation standards are met by up-keep and maintenance to include, but
not limited to restock, remerchandising, dusting, and vacuuming sales floor as needed.
• Respond and handle customer issues by using good judgment and logic in solving problems
and making decisions within the job scope.
• Assist in other areas of the store when business needs dictates, which may include, but not
limited to: hunting, fishing, camping, footwear, clothing, gifts, general store, archery,
marine, backend, cashier, and deli or bargain cave.
Requirements
• High School Diploma or Equivalent
• 0 to 2+ Years Experience
• Hiring preference is given to those with solid sales experience and at least one year of
related field experience.
Other Skills/Abilities
• Must be able to read documents, printouts, reports, computer screens and other written
communication.
• Must be able to hear well enough to communicate with customers and co-workers.
• Must be able to stand and/or walk to fill orders, assist customers on the sales floor, etc.
• Must be able to stock product at various racking levels, use step-stool or ladder, etc.
• Must be able to place product on/off shelving.
• Must be able to write, type and use phone system.
HOW TO APPLY
Apply Online: www.cabelas.jobs
Cabela's offers a competitive salary and comprehensive benefits package including, generous product
discounts, 401K savings plan, and Health and Dental coverage for you and your family.
Cabela’s shows commitment to the men and women who have served in the United States Armed
Forces by providing meaningful, challenging career opportunities where military skills and experience
may be applied.
Cabela’s is an Equal Opportunity Employer (EOE) and we seek to create an inclusive workplace that
embraces diverse backgrounds, life experiences and perspectives.
Applying for a posted position does not guarantee an interview. The Internal Transfer Policy applies.
Post Date: 02/27/2017
Northern Tool – Service Technician
Service Technician- Full Time
Northern Tool
Job Description:
Are you looking for a career that matters? Would you like to build relationships by helping others solve
problems? What about an opportunity that leads you in new and exciting directions, working for a
growing family-owned company? How about earning rewards that show you are welcomed and
appreciated? You’re one step closer to making that life-changing choice - a choice that will put you in a
league of top talent, offer you exceptional learning opportunities, and make you part of an exciting
team.
At Northern Tool & Equipment We Offer:
• A fast growing nationwide brand – almost 100 locations in 19 states.
• Competitive wages plus commission.
• Clean and organized work environment.
• Supplied tools and uniforms.
• A defined training program to support your success.
• Competitive benefits package: health, retirement, employee assistance and more!
• Generous employee discount at all of the Kotula family of companies – Northern Tool &
Equipment, Kotulas.com, The Sportsman’s Guide.com, The Golf Warehouse.com,
Soccersavings.com, Baseballsavings.com, Tractorseats.com, Great Northern Equipment.
Job Requirements:
• At least one year years of experience repairing and maintaining small engines, large lawn
equipment, generators, commercial pressure washing units, mowers, tillers, and other related
equipment with a track record of success.
• The skills to clearly explain and communicate to the customer’s satisfaction the diagnosis and
repair of the machine in a professional manner to provide a positive experience.
• Demonstrated accuracy and thoroughness, while providing a valued quality solution to the
customer.
• The ability to recognize and observe all safety and security procedures, report potentially unsafe
conditions, and use equipment and materials properly.
• The desire to treat others with respect and contribute to building a positive team spirit.
• The ability to understand and follow instructions and promptly respond to direction.
• The drive to work with integrity, always upholding company values, while operating a profitable
service business.
You Might Also Have:
• Knowledge of small engine theory (2 and 4 stroke): lubrication, cooling, ignition and fuel
systems.
• Certifications in major manufacture brands like Honda, Kohler, Briggs & Stratton, Generac, MTD,
etc. Master certification is a plus!
• Extensive experience with electrical systems, plunger driven or axial pressure washer pumps and
unloader systems, hydraulic theory, and associated diagnostic equipment and procedures.
• Proven track record of business development – Business to Business, Business to Consumer.
• Strong organizational and computer skills (fluent in Microsoft Office products)
HOW TO APPLY
Applicants can visit our website to apply. Northerntool.com at the bottom of the page is a link
for Careers.
Post Date: 02/27/2017
NFS – Technical Support Position
Technical Support Position
Contractor technical support to Nuclear Fuel Service
Seeking qualified students (current/former) that would be interested in working at the Erwin Site based
on the following:
1. Prepare design drawings for pipe handrails, structural steel modifications, concrete foundations,
rebar layouts, and piping layouts.
2. Experience with Auto CAD, Microstation, Revit, and/or Solidworks is preferred.
3. Structural/mechanical background.
4. Some knowledge of welding and weld symbols is preferred.
5. Familiarity with AISC and ACI detailing is preferred.
6. Part time 15-30 hrs./wk.
How to Apply
Interested applicants may submit resumes to [email protected].
For questions please call, 423-330-7189
Post Date: 02/27/2017
Talent Recruiter
Kelly Services
Job description
Kelly Services is currently hiring for a Talent Recruiter. This is currently a temp-to-hire opportunity.
Job Duties
• Serve as a support for the Staffing Supervisors as it pertains to the management of the
temporary workforce and service delivery.
• Develop and maintain relationships with the temporary employees through best in class
service.
• Facilitating the process to acquire temporary staff through recruiting, interviewing, and full-
cylce hiring.
• This individual will be held accountable for meeting and exceeding the overall level of
service delivery for the client locations supported by the local branches, including client and
candidate outcomes.
• The success of this individual will be highly impacted by their ability to establish strong
working relationships with the Kelly Services temporary talent as well as qualified volume
recruiting.
Requirements:
• A Bachelor’s degree or an Associates degree and two years of experience in a recruiting
related position is also acceptable.
• The key competencies for the Staffing Supervisor include the ability to build relationships,
communicate effectively, and accomplish many detail-oriented tasks simultaneously. In
addition, the candidate must demonstrate a strong customer focus, team orientation, and
technical proficiency (i.e. computer skills).
How to Apply
Please submit resumes to [email protected].
For questions: Carly Hopkins I Sr. Account Talent Manager I 423-282-5550
Post Date: 02/27/2017
Assistant Director of Childcare
YWCA Bristol This full time position works directly with the Director of Childcare in assuming the responsibility for the
daily operations of the YWCA Children’s Center.
SKILLS
• Proficient in Microsoft Office products
• Strong communication, organizational, and decision making skills
• Excellent interpersonal skills
• Functions as a self-directed member of a team
EDUCATION/EXPERIENCE
• Must be a minimum of 18 years of age
• Associates Degree or higher in related field; Bachelor’s Degree preferred
• Two (2) years of experience as a Director/Assistant Director in a licensed center
How to Apply
Send resumes to YWCA Bristol * 106 State Street * Bristol, TN 37620 * Attn: Director of Licensed
Programs or visit our website at www.ywcabristol.org
The YWCA Bristol is dedicated to eliminating racism, empowering women and promoting peace, justice,
freedom and dignity for all
Post Date: 02/27/2017
Part-Time Employees – LSO Final Mile
LSO Final Mile is seeking part time employees to fill needs in the same day logistics field. Applicants
must have excellent customer service skills, basic computer skills, and be able to lift 50+ pounds
regularly.
Required Skills:
• Excellent customer service skills both face to face, through E-mail, and over the phone.
• Basic computer skills, knowledge of Microsoft Office.
• Ability to lift 50+ pounds regularly.
• Prior warehouse experience is a plus.
Job Duties:
• Sorting and staging freight.
• Communicating customer needs in person, over the phone, and by E-mail.
• Communicating with and working with Owner Operators.
• Working in both an office and warehouse environment.
Part Time – 5 hours per day, 5 days per week, $10 per hour.
Shifts – 9AM to 2PM or 1PM to 6PM.
How to Apply
If interested in becoming part of the LSO Final mile team and a growing industry please call 423-421-
3928 or 423-323-6810 to schedule an interview
Post Date: 02/27/2017
Summer Positions – Warrior’s Path
Summer Employment Warrior’s Path State Park
Job Fair for summer employment positions will be held on March 10, 2017 from 1-4:00 p.m.
Location: Recreation building on Duck Island
The following jobs will be available:
Park maintenance
Marina Dock
Lifeguards
Pool cashiers
Campground clerk
Post Date: 02/28/2017
Industrial Technician
Bharat Forge PMT – Surgoinsville, TN
Industrial Electronics Technicians are needed to fill an immediate need in the Maintenance Department.
This position includes troubleshooting PLC controlled presses and CNC machine centers, data highway,
SCR power controls, 3-phase motors and controllers, conveyor systems, induction heaters and
hydraulic/pneumatic systems in a heavy industrial environment.
An Associate Degree in Electromechanical Technology, Electronics or equivalent training is a minimum
requirement. Experience with Allen Bradley 500 Series and RS Logic software preferred.
How to Apply
Email a resume to [email protected] by March 6th. Please type Industrial
Technician in the subject line when emailing your resume.
Post Date: 02/28/2017
Pipe Fitter
Pipe Fitter-Radford, VA
TEC Industrial
T E C Industrial has been building a team for more than 60 years, we are a growing Industrial
Maintenance and Construction specialty contractor focused on the safety of our employees, integrity of
our operations, and the solutions achieved for our customers. Our company is a welcome home for
individuals who take pride in their work, who enjoy working on a strong team, and who keep our
customer’s needs in mind. T E C Industrial is recognized in the industry as leader in providing
comprehensive solution to our customers, and we do it with a strong group of dedicated employees.
We are proud to offer our employees:
Medical, Dental
Vision
STD
LTD
Group Life
Accidental Death and Dismemberment
Voluntary Life
401k plan with Co. match.
Supplemental options: Accident plan, Critical Illness plan, Whole life insurance, FSA.
We are a growing organization seeking committed candidates to help us serve our clients. We have an
opportunity for Pipe Fitters.
Preferred Experience
Lay out, assemble, install, and maintain pipe systems, pipe supports, and related hydraulic and
pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling, and
industrial production and processing systems,
Apply knowledge of system operation, and follow blueprints.
Select type and size of pipe and related materials and equipment.
Inspect work site to determine presence of obstructions and to ascertain that holes cut for
pipes will not cause structural weakness.
Plan installation or repair to avoid obstructions and to avoid interfering with activities of other
workers.
Cut pipe, using saws, pipe cutter, hammer and chisel, cutting torch, and/or pipe cutting
machine.
Thread pipe, using pipe threading machine and bend pipe, using pipe bending tools and pipe
bending machine.
Assemble and install a variety of metal and non-metal pipes, tubes, and fittings, including iron,
steel, copper, and plastic. Connect pipes.
Secure pipes to structure with brackets, clamps, and hangers, using hand tools and power tools.
Install and maintain hydraulic and pneumatic components of machines and equipment, and
refrigeration and air-conditioning systems.
Increase pressure in pipe system and observe connected pressure gauge to test system for
leaks.
Must be able to perform basic rigging practices as well as flagging practices based on OSHA
1926.1428. Must be able to safely use hand and power tools. Must be able to work safely and
follow Company and site safety policies.
Job Duties Include
Monitor and maintain building systems as assigned
Execute various minor construction projects as required
Willingness and ability to work various shifts and overtime on short notice, in order to meet
businesses’ needs.
Maintain equipment & clean around workstations.
Interface with supervisor &/or manager to give progress updates as required
Able to work outdoors in the elements
Work in tight spaces – physically able to climb up and down safely in proximity of manufacturing
and process equipment.
Elevated work > 4’ – fall protection required
Physical Profile Requirements
The physical demands described here are representative of those that must be met by an employee to
successfully perform the essential functions of this job.
The job requires occasionally remaining on one's feet in an upright position without moving for long
periods of time, occasionally moving about on foot for long periods of time, remaining in a seated
position for long periods of time, and/or climbing stairs, step-ladders, extension ladders and scaffolding
ladders. The job also requires the ability to raise or lower an object of approximately 5-50 pounds from
one level to another, the ability to transport an object of up to 50 pounds a distance of up to 10 yards,
usually holding it in the hands or arms, or on the shoulder, the ability to exert up to 50 pounds of force
occasionally, 20 pounds of force frequently and a negligible amount of force constantly so that an object
moves away from the force, and/or the ability to exert up to 50 pounds of force occasionally, 20 pounds
of force frequently and a negligible amount of force constantly so that an object moves toward the
force.
Must be capable of operating a standard 1/2 ton pick-up for occasional delivery and pick-up of materials
and personnel and hold a valid, unrestricted motor vehicle operator's license issued by the state of
residence, and the manual dexterity necessary to operate a standard desktop computer keyboard.
How to Apply
Please visit our website at http://jobs.ourcareerpages.com/job/219504?confirmID=641574ce-216d-
426b-b1da-dbbb4bafab9f to apply.
Post Date: 03/02/2017
Pipe Welder
Pipe Welder-Radford, VA
TEC Industrial
T E C Industrial has been building a team for more than 60 years, we are a growing Industrial
Maintenance and Construction specialty contractor focused on the safety of our employees, integrity of
our operations, and the solutions achieved for our customers. Our company is a welcome home for
individuals who take pride in their work, who enjoy working on a strong team, and who keep our
customer’s needs in mind. T E C Industrial is recognized in the industry as leader in providing
comprehensive solution to our customers, and we do it with a strong group of dedicated employees.
We are proud to offer our employees:
Medical, Dental
Vision
STD
LTD
Group Life
Accidental Death and Dismemberment
Voluntary Life
401k plan with Co. match.
Supplemental options: Accident plan, Critical Illness plan, Whole life insurance, FSA.
We are a growing organization seeking committed candidates to help us serve our clients. We have an
opportunity for Pipe Welders this fall.
Preferred Experience
Lay out, fit, and weld fabricated, cast, and forged components to assemble structural forms,
such as machinery frames, tanks, pressure vessels, furnace shells, and building and bridge parts,
according to blueprints and knowledge of welding and metallurgy.
Select equipment and perform layout, assembly and welding applying knowledge of geometry,
physical properties of metal machining, weld shrinkage, and welding techniques.
Bolt, clamp, and tack-weld parts to secure in position for welding.
May assemble parts by bolting and riveting. May repair products by dismantling, straightening,
reshaping, and reassembling parts, using cutting torch, straightening press, and hand tools, and
be designated Welder, Structural Repair (welding).
Must be able to pass Client welding certification for carbon, stainless, hastalloy and titanium
Experience in an industrial chemical environment strongly preferred.
Set and adjust welding machine according to materials used.
Identify and resolve hazards associated with assignments.
Work with blueprints or instructions from supervisors.
Check work along the way to ensure it's up to code and specifications.
Must be able to perform basic rigging practices, provide certification, pass client or company
welding certification, as well as flagging practices based on OSHA 1926.1428.
Must be able to safely use hand and power tools and follow Company and site safety policies.
Job Duties Include
Monitor and maintain building systems as assigned
Execute various minor construction projects as required
Willingness and ability to work various shifts and overtime on short notice, in order to meet
businesses’ needs.
Maintain equipment & clean around workstations.
Interface with supervisor &/or manager to give progress updates as required
Able to work outdoors in the elements
Work in tight spaces – physically able to climb up and down safely in proximity of manufacturing
and process equipment.
Elevated work > 4’ – fall protection required
Physical Profile Requirements
The physical demands described here are representative of those that must be met by an employee to
successfully perform the essential functions of this job.
The job requires occasionally remaining on one's feet in an upright position without moving for long
periods of time, occasionally moving about on foot for long periods of time, remaining in a seated
position for long periods of time, and/or climbing stairs, step-ladders, extension ladders and scaffolding
ladders. The job also requires the ability to raise or lower an object of approximately 5-50 pounds from
one level to another, the ability to transport an object of up to 50 pounds a distance of up to 10 yards,
usually holding it in the hands or arms, or on the shoulder, the ability to exert up to 50 pounds of force
occasionally, 20 pounds of force frequently and a negligible amount of force constantly so that an object
moves away from the force, and/or the ability to exert up to 50 pounds of force occasionally, 20 pounds
of force frequently and a negligible amount of force constantly so that an object moves toward the
force.
Must be capable of operating a standard 1/2 ton pick-up for occasional delivery and pick-up of materials
and personnel and hold a valid, unrestricted motor vehicle operator's license issued by the state of
residence, and the manual dexterity necessary to operate a standard desktop computer keyboard.
How to Apply
Please visit our website at http://jobs.ourcareerpages.com/job/219504?confirmID=641574ce-216d-
426b-b1da-dbbb4bafab9f to apply.
Post Date: 03/02/2017
Bookkeeper/Accounting Position
Holston Glass Company
Job Description
Fast passed, deadline driven bookkeeping and accounting position in a glass sub-contractor office that
includes a local retail sales counter located in Kingsport, TN. Full time and long term.
Requirements
Possess Bookkeeping and Basic Accounting Knowledge
Has strong computer skills with emphasis on data entry
Be able to use MS Office with strong (above average) spreadsheet and outlook skills
Understand general office procedures (digital archiving a PLUS)
Experience Required [a PLUS if with Sage (100 Contractor – formally MasterBuilder), Knowledge
of Business License Taxes, Sales and Use Tax, Payroll (data entry and liabilities), A/P, A/R and
closing month and year-end processes]
Ideal Candidate Qualities
Available to start immediately (if selected and currently employed work-notice time period will
be acceptable)
General Office Skills, Bookkeeping and/or Accounting Experience
Upbeat, Dedicated and Driven to Perform
Clean, Courteous with a Touch of Professionalism
Knowledgeable but Ready to Learn
Adaptable and Willing to Establish Processes Necessary to Improve Efficiency
How to Apply
Send resume’ to [email protected]
Post Date: 03/02/2017
Maintenance Tech- 2nd shift
Dentsply Sirona
Dentsply Sirona is the world’s largest manufacturer of professional dental products and technologies,
with a 130-year history of innovation and service to the dental industry and patients worldwide.
Dentsply Sirona develops, manufactures, and markets a comprehensive solutions offering including
dental and oral health products as well as other consumable medical devices under a strong portfolio of
world class brands. As The Dental Solutions CompanyTM, Dentsply Sirona’s products provide
innovative, high-quality and effective solutions to advance patient care and deliver better, safer and
faster dentistry.
SUMMARY
This position performs a variety of mechanical, electrical and troubleshooting functions that include, but
are not limited to fabrication, modification, installation, testing, calibration, maintenance and repair of
parts, sub-assemblies or equipment. Works directly with engineers, designers, specialists and
management, as needed.
ESSENTIAL DUTIES
• Troubleshoots/repairs and adjusts pneumatic and hydraulic equipment, mechanical
equipment and components.
• Conducts and documents tests or calibrations on systems and equipment to determine
compliance, reliability and to identify potential problem areas; troubleshoots equipment,
instrumentation, manufacturing processes, technical problems and procedures.
• Installs hardware and software upgrades to process or support equipment as part of
projects. Performs as a member of a team to design, fabricate, assemble, operate and test
systems and equipment to insure quality and reliability.
• Performs preventive maintenance on plant equipment.
• Conducts and documents tests or calibrations on systems and equipment to determine
compliance, reliability and to identify potential problem areas.
• Troubleshoots equipment, instrumentation, manufacturing processes, technical problems
and procedures.
• Performs as a member of a team to design, fabricate, assemble, operate and test systems
and equipment to insure quality and reliability.
• Supports company goals, objectives, policies, procedures, QSR, and FDA regulations.
• Works independently to complete work assignments with minimal supervision.
• Reports complaints in accordance to complaint handling process.
QUALIFICATIONS /COMPETENCIES
• Performs basic machining: Sets up and operates shop equipment such as mills, surface
grinder, lathe, and band saw. Uses precision measuring equipment for machining.
• Higher level of mechanical and electrical aptitude.
• Ability to follow procedures and understand engineering drawings.
• Understand Lock-Out/Tag-Out System.
• Ability to design custom parts, equipment, and equipment up-grades.
• Basic plumbing, carpentry and electric.
EDUCATION and/or EXPERIENCE
• Associates degree in Mechanical Technology.
• Five years’ experience in related field preferred.
MATHEMATICAL SKILLS
• Ability to work with mathematical concepts such as probability and statistical inference, and
fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such
as fractions, percentages, ratios, and proportions to practical situations.
• REASONING ABILITY
• Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to
interpret an extensive variety of technical instructions in mathematical or diagram form and
deal with several abstract and concrete variables.
COMPUTER SKILLS
• Microsoft office – Word, Excel
• Internet software
• Email application
• Database software
• Design software
• Manufacturing software
• Project Management Software
COMPUTER SKILLS
• Microsoft office – Word, Excel
• Internet software
• Email application
• Database software
• Design software
• Manufacturing software
• Project Management Software
CERTIFICATES, LICENSES, AND REGISTRATIONS
• Fork Lift operator licensure
PHYSICAL DEMANDS
• The physical demands described here are representative of those that must be met by an
employee to successfully perform the essential functions of this job. Reasonable
accommodations may be made to enable individuals with disabilities to perform the
essential functions.
• Frequency of on-the-job physical activities:
Standing, walking, climbing or balancing, bending, stooping, kneeling, crouching or
crawling.
Sitting, reach with hands and arms, use hands to finger, handle, or feel; manual dexterity,
repetitive finger motion; speaking; hearing; seeing; color vision; ability to adjust
focus.
• Weight lifted:
Up to 50 lbs. (infrequent)
WORK ENVIRONMENT
• The work environment characteristics described here are representative of those an
employee encounters while performing the essential functions of this job. Reasonable
accommodations may be made to enable individuals with disabilities to perform the
essential functions.
• Work near moving mechanical parts.
• Fumes or airborne particles.
• Risk of electrical shock.
• Moderate – Loud noise – manufacturing; recommend hearing and eye protection; steel toe
shoes.
How to Apply
Go To: www.dentsplysirona.com – Choose careers at Dentsply. Search criteria, Dentsply Tulsa/JCM
Industrial Mechanic
Industrial Mechanic
Foam Products
We have an immediate opening for an Industrial Mechanic to work in our plant maintenance. Job will
entail but not be limited to maintaining equipment per PM schedule, welding, fabrication of parts,
rigging, electrical and mechanical repair of equipment.
How to Apply
Please send resumes to [email protected] or [email protected].
Post Date: 03/02/2017
Drafting Technician
Wilson & Associates, PC
We are in need of a drafting technician for our Tri-Cities office located in Jonesborough TN. The position
is full time, pay is competitive and based on ability. The technician will be drafting survey data, civil
engineering drawings, environmental plans, aerial mapping and LIDAR data, and survey plats for the
construction industry and public/private sector property surveys.
Wilson & Associates uses Microstation CADD software and is able to provide all required training to
highly motivated individuals. All former CADD experience/education is considered a plus. The need to fill
the position is immediate.
How to Apply
All resumes should be submitted to [email protected], no phone calls please.
Phone interviews will be held after the field of applicants has been reviewed, with in-person interviews
to follow. Wilson & Associates, P.C. is an equal opportunity employer and a drug free workplace.
Post Date: 03/03/2017
Software Analyst/Engineer
If you are looking for a challenging opportunity to support customers by phone and in person while
working with SQL databases, Windows and Linux Servers, create specifications for new software by
gathering data and writing technical documents, test new software, lead an implementation team to
install new software on-site, train customers in how to use it, be able to grow with us (we prefer to
promote from within) then you need look no further. The candidate who has a programming degree
who likes doing a variety of different things, likes working with people and doing some traveling, would
be ideal.
We are a rapidly growing, leading edge technology company that prides itself on innovation, service and
customer support. We customize our installations to meet each customer's requirements while
providing maintenance to ensure future compatibility as an office grows and its data processing needs
change. We strive to provide our customers with software solutions that meet their needs by continually
supplying them with user-friendly software and flexible solutions that exceed expectations.
We are a helpdesk facility, NOT a call center; we receive calls from a specific number of clients, seldom
from the general public. We are not looking for contract work. Applicants only; recruiters please don't
contact this job poster. DO NOT contact us with unsolicited services or offers. We do not hire for remote
work.
Job Requirements:
Self-starter that can work in a team environment
Provide end user desktop/phone support to determine and resolve end user support issues
Good communications, customer service and basic accounting skills
Install hardware and customized software on-site
Ability to train customers in use of software and hardware
Must live within driving distance of our office, we do not do remote work
Knowledge, or ability to learn, basic command line functions for Windows and Linux servers
Manage projects, knowledge of software development life cycle, gathering technical data,
creation of requirements documentation (specifically dealing with SRS documentation, Use
Cases, and UML Diagrams) and basic functional understanding of relational databases required
Perform Quality Assurance on new software
Some overnight travel will be necessary (company vehicles and credit cards are provided for
expenses, plus a daily per diem for food, etc.)
A 4 year degree is highly preferred but not required (higher education is a plus)
How to Apply
When responding for a position please show the position title in the Subject of the email. Fax or email
resume and salary history (required for consideration) to 423-538-1919 or [email protected]
Post Date: 03/03/2017