Motors | Automation | Energy | Transmission & Distribution | Coatings

ODP NEMA Premium Motorswith AEGIS® Bearing Protection Ring

www.weg.net

All data subject to change without notice2

Nema Premium® Efficiency Motors ODP – Foot MountWEG Open Drip Proof motors with AEGIS® Bearing Protection Ring are designed to meet applications where variable frequency controllers are used. These motors are specifically designed to provide maximum ventilation and cool operation, along with bearing protection from drive-induced currents.

Features that make a difference:

• 50/60 Hz rated up to 250 HP (same Horse Power at 50 Hz with a 1.0 service factor)

• Class F insulation (impregnation Resin and Magnet wire are class H)

• Class B Rise at 1.15 Service Factor

• F1 Mounted (Cast Iron Frame motors are F2 convertible)

• Stainless Steel Nameplate – Laser etched with high contrast background (Cast Iron Frames only)

• Cast Iron Frames: Regreasable ball bearings (frames 254T and up)

• Rolled Steel Frames: ZZ ball bearings (permanently lubricated)

• Inverter Rated

• AEGIS® Bearing Protection Ring installed externally to the motor

HP kW RPMNEMA Frame

Catalog NumberList

PriceMult.

SymbolApprox. Shipping

Weight (lbs)Service Factor

FL Amps @ High

FL. Eff. (%)

“C” Dimension (in)

Voltage (V)

Notes

1 0.75 1800 E143/5T 00118OT3E143T-G 515 N1B 36 1.15 1.45 85.5 12.047 208-230/460 9;24;34

1.5 1.1 3600 E143/5T 00156OT3E143T-G 573 N1B 34 1.15 1.90 85.5 12.047 208-230/460 9;24;34

1.5 1.1 1800 E143/5T 00158OT3E145T-G 580 N1B 43 1.15 2.20 86.5 12.047 208-230/460 9;24;34

2 1.5 3600 E143/5T 00236OT3E145T-G 618 N1B 43 1.15 2.50 86.5 12.047 208-230/460 9;24;34

2 1.5 1800 E143/5T 00218OT3E145T-G 630 N1B 43 1.15 2.90 86.5 12.047 208-230/460 9;24;34

3 2.2 3600 F143/5T 00336OT3E145T-G 680 N1B 49 1.15 3.50 86.5 12.835 208-230/460 9;24;34

3 2.2 1800 182T 00318OT3E182T-G 679 N1B 55 1.15 4.06 89.5 13.504 208-230/460 9;24;34

5 3.7 3600 182T 00536OT3E182T-G 814 N1B 57 1.15 6.17 88.5 13.504 208-230/460 9;24;34

5 3.7 1800 184T 00518OT3E184T-G 783 N1B 71 1.15 6.41 89.5 14.291 208-230/460 9;24;34

7.5 5.5 3600 184T 00736OT3E184T-G 1,105 N1B 69 1.15 8.97 88.5 14.291 208-230/460 9;24;34

7.5 5.5 1800 213/5T 00718OT3E213T-G 1,063 N1B 90 1.15 9.03 91.0 17.165 208-230/460 9;24;34

10 7.5 3600 213/5T 01036OT3E213T-G 1,249 N1B 134 1.15 11.9 90.2 17.165 208-230/460 9;24;34

10 7.5 1800 213/5T 01018OT3E215T-G 1,270 N1B 112 1.15 12.2 91.7 17.165 208-230/460 9;24;34

15 11 3600 213/5T 01536OT3E215T-G 1,668 N1B 139 1.15 17.4 91.0 17.165 208-230/460 9;24;34

15 11 1800 254T 01518OT3E254T-G 1,679 N1B 247 1.15 18.6 93.0 20.669 208-230/460 24;34;35

20 15 3600 254T 02036OT3E254T-G 1,981 N1B 205 1.15 24.6 91.0 20.669 208-230/460 24;34;35

20 15 1800 256T 02018OT3E256T-G 2,034 N1B 291 1.15 25.0 93.0 22.401 208-230/460 24;34;35

25 18.5 3600 256T 02536OT3E256T-G 2,360 N1B 269 1.15 29.8 91.7 22.401 208-230/460 24;34;35

25 18.5 1800 284T 02518OT3E284T-G 2,400 N1B 382 1.15 29.9 93.6 23.386 208-230/460 24;34

30 22 3600 284TS 03036OT3E284TS-G 2,731 N1B 373 1.15 35.2 92.4 22.000 208-230/460 24;34

30 22 1800 286T 03018OT3E286T-G 2,770 N1B 459 1.15 35.4 94.1 24.882 208-230/460 24;34

40 30 3600 286TS 04036OT3E286TS-G 3,548 N1B 457 1.15 47.1 93.0 23.504 208-230/460 24;34

40 30 1800 324T 04018OT3E324T-G 3,369 N1B 574 1.15 48.2 94.1 26.181 208-230/460 24;34;35

50 37 3600 324TS 05036OT3E324TS-G 4,132 N1B 541 1.15 59.1 93.6 24.685 208-230/460 24;34;35

50 37 1800 326T 05018OT3E326T-G 4,093 N1B 595 1.15 61.4 94.5 27.667 208-230/460 24;34;35

60 45 3600 326TS 06036OT3E326TS-G 4,955 N1B 627 1.15 71.0 93.6 26.181 208-230/460 24;34;35

60 45 1800 364/5T 06018OT3E364T-G 5,039 N1B 935 1.15 69.9 95.0 29.764 208-230/460 24;34;35

75 55 3600 364/5TS 07536OT3E364TS-G 6,436 N1B 805 1.15 81.5 94.1 27.638 208-230/460 24;34;35

75 55 1800 364/5T 07518OT3E365T-G 6,280 N1B 935 1.15 85.5 95.0 29.764 208-230/460 24;34;35

100 75 3600 364/5TS 10036OT3G365TS-G 7,412 N1B 935 1.15 111 94.5 27.638 460 24;34;35

100 75 1800 404/5T 10018OT3G404T-G 8,099 N1B 1,207 1.15 115 95.4 34.133 460 24;34;35

Notes: 9 Rolled Steel Frame 24 Might not be readily available. Usually ships in two weeks 34 AEGIS Installed. No changes in the useful “N-W” dimension 35 AEGIS Installed. Shortens “N-W” dimension

Inverter Rated:1000:1 for variable torque4:1 for constant torque*Frame 404/5T 150HP and up 2:1CT and 1000:1VT

Cast Iron

Rolled Steel

ODP NEMA Premium Motors with AEGIS® Bearing Protection Ring

ODP NEMA Premium Motors with AEGIS® Bearing Protection Ring 3

www.weg.net

All data subject to change without notice 3

www.weg.net

WEG’s CFW11 uses state-of-the-art technology to control motors up to 600HP. Aimed at increasing customers productivity, the CFW11 offers the following innovations:

Standard Features• Same programming as all other WEG VFD‘s• Plug and play philosophy (connect and use) enables quick and easy installation of

accessories and options.• USB for microcomputer connection for using SUPERDRIVE programming and monitoring

software as well as updating inverter firmware.• Human-Machine Interface (HMI) with backlit graphic display and soft-keys, greatly

facilitates inverter programming and operation.• DC link inductors (symetrically connected to positive and negative DC link terminals) enable

compliance with IEC61000-3-12 standard requirements regarding harmonics, (no need for external line reactance)

• Intelligent thermal management enables full protection of IGBTs, monitoring of heatsink and internal air temperature.

• Automatic control of the heatsink fan with speed sensor (additional protection) and easily detachable from the unit for cleaning and maintenance.

• Normal Duty and Heavy Duty ratings to adapt optimally to all kinds of loads.• Protection with failure and alarm warnings.• Motor overload protection in compliance with IEC 60947-4-2/UL 508 C.• Memory card built into the standard product allows user to create functions without the need

to use an external PLC (soft-PLC via IEC61131-3 programming software)• Guided start-up simplifies initial user programming.• Real time clock• TRACE / SCOPE function to assist with the start-up and system diagnostics.• SuperDrive G2 compatible

CFW11Variable Frequency Drives

Options• Safety stop in compliance with EN 954 - 1 / category III**• External control feed with 24 Vdc• RFI filter in compliance with EN

61800 - 3 (internal)**• DB Resistors available upon

request** Factory ordered

CFW700Variable Frequency DrivesThe WEG CFW700 Series was designed to exceed industry expectations. Based on the robust CFW11 platform the CFW700 is designed and optimized for variable torque applications such as pumps and fans.

Standard Features• Simplicity – same programming as all other WEG drives• Dual DC Bus chokes for longer VFD lifetime (6% equivalent), reduces harmonics eliminating the need

for external line reactors• 24VDC Power Supply for process transducers - Standard• Soft-PLC with free programming software• Encoder Input - Standard• RS-485 Modbus RTU - Standard• Conformal Coated boards for harsh industrial environments• Rated 50 °C (122 °F) – up to 60 °C (140 °F) with derating• Self-tuning function automatically matches VFD with motor• UL, cUL, CE, C-Tick, GOST, IRAM, INMETRO approved• SuperDrive G2 compatible

The CFW700 is the optimal drive for pump and fan control. The drive includes features such as built in PID controllers that can be programmed in engineering units for ease of understanding and set up. The drive also features an integrated power supply to be used with external transducers to measure flow or pressure.

These features combined with the drive’s keypad based start up guide, make installation and parameter set up fast and easy.

Mounting Options

The perfect VFD partners for your WEG motor

Please contact your authorized distributor:

www.weg.net

WEG ELECTRIC CORP.6655 Sugarloaf ParkwayDuluth, GA 30097Phone: 1-800-ASK-4WEGFax: 1-770-338-1632info-us@weg.netwww.weg.net/us

WEG WarrantyWEG Electric Corp’s warranty covers manufacturing defects of our motor per our standard warranty policy. Electro Static Technology covers the performance of the AEGIS® Bearing Protection Ring with a separate warranty, as follows:

WEG Electric Corp. offers the following products, and more! With a full range of IEC/NEMA Global Certifications and a full line of products, WEG can supply the right solution for your needs anywhere in the world. To learn more about WEG’s products and solutions or to locate a Distributor near you, please call 1-800-ASK-4WEG or visit www.weg.net/us.

Low Voltage Motors, Single and 3-Phase, 1/8 – 700HP

Large Electric Motors

Variable Frequency Drives

Soft Starters

Controls

Custom Panels

Generators

Power Transformers

Custom Solution Package SalesWEG can package any of its products for ease of sale! Enjoy a single point of contact for the entire package of products and assistance from quote through after-sales support. Ask your WEG Sales Representative for details.

US

A O

DP

NA

1

1/20

12