Date post: | 08-Apr-2017 |
Category: |
Documents |
Upload: | kate-loucks |
View: | 79 times |
Download: | 1 times |
WELCOME TO ACCENT METALS
We are located at 3675 Sandhurst Drive
York, PA 17406
You can reach us at (717)699-5676
WHAT WE FINISH
METALS
T-304 / T-316 Stainless Steel Muntz Bronze Naval Brass Commercial Bronze Aluminum Nickel Silver Hastelloy Titanium
SHAPES
Sheets Bars Tubes Squares Angles Tees Channels Extrusions Custom pieces
TYPE
MAXIMUM SIZE
AVAILABLE FINISHES
Sheets 102” x 360” 62” x 300”
#7 - #8 #3 - #6
Bars Any Size Any finish
Round Tubing 12” O.D. x 360” #3 – #6 Cylindrical Grain or Longitudinal Grain #7 – #8
Square Tubing 12” H x 360” L Any finish
Angles 12” Length Any finish – inside or outside of angles
Extrusions 12” H x 600” L Most finishes available
FINISHES WE PRODUCE:
#8 Mirror Finish - Bright mirror, this is the most reflective of mechanical finishes.
#7 Pre Buff – A reflective finish with prevalent buffing grains.
#6 Satin Finish – Extremely fine grain with short strokes.
#6 Long Grain – Long continuous grain lines, great for blending, can also do Cross Grain.
#4 Satin Finish – Standard 220 grit finish.
Non Directional Satin – Orbital grain.
Sand Blasted Finish – Exactly that - a flat matte finish.
Swirl Pattern – Custom decorative / Retro finish.
Hand Rails Square Tubing Round Tubing
Angles Extrusions
Bars and Sheets
This is an example of our #8 Mirror Finish
Custom Hand Polishing
Any Size, no Minimum Quantity
The Accent is on Quality
Pick up & Delivery