+ All Categories
Home > Documents > Welcome to PlayMounds. Reshaping We developed our mound ... · seating area for your playground,...

Welcome to PlayMounds. Reshaping We developed our mound ... · seating area for your playground,...

Date post: 09-Aug-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
3
play solutions innovativeplaysolutions.com Welcome to PlayMounds. Reshaping the landscape of playgrounds. You may have seen mounds in play areas. You may have even specified building a mound in a playground project. It was probably made using concrete and covered in pour-in-place or synthetic grass. It’s also probably an unforgiving surface. It’s heavy, took a lot of valuable time to set and install, and if you need to reconfigure the play area— well that mound isn’t going anywhere. So plan to design around it. We wanted to innovate in this market and create a better alternative. We wanted to build a product that lasts a long time, is easier to install and is flexible enough to adapt to the changing needs of your project. Above all, we wanted to build a structure that was safer—and more fun—to play on. PlayMounds were designed with those three goals in mind—fun, safety, and durability. Through research and experimentation we’ve achieved just that. it’s designed with a dual-layer foam system for safety & durability It’s safe in the Sun. It’s easily repaired if damaged. It’s light-weight and easy to install. It’s covered by our 10-Year EXTENDED Warranty. We developed our mound from the ground up.
Transcript
Page 1: Welcome to PlayMounds. Reshaping We developed our mound ... · seating area for your playground, backyard, or any area in your landscape. Mounds are shipped ready for you to cover

play solutions innovativeplaysolutions.com

Welcome to PlayMounds. Reshaping the landscape of playgrounds.You may have seen mounds in play areas. You may have even specified building a mound in a playground project. It was probably made using concrete and covered in pour-in-place or synthetic grass.

It’s also probably an unforgiving surface. It’s heavy, took a lot of valuable time to set and install, and if you need to reconfigure the play area—well that mound isn’t going anywhere. So plan to design around it.

We wanted to innovate in this market and create a better alternative.

We wanted to build a product that lasts a long time, is easier to install and is flexible enough to adapt to the changing needs of your project. Above all, we wanted to build a structure that was safer—and more fun—to play on. PlayMounds were designed with those three goals in mind—fun, safety, and durability. Through research and experimentation we’ve achieved just that.

it’s designed with a dual-layerfoam system for safety &durability

It’s safe in the Sun.

It’s easily repaired if damaged.

It’s light-weight and easy to install.

It’s covered by our 10-Year EXTENDED Warranty.

We developed our mound from the ground up.

Page 2: Welcome to PlayMounds. Reshaping We developed our mound ... · seating area for your playground, backyard, or any area in your landscape. Mounds are shipped ready for you to cover

play solutions innovativeplaysolutions.com

Face it. Kids fall at playgrounds all the time..Our mounds meet fall height safety requirements. If you child falls on one of our mounds, they’ll be safe. PlayMounds protective foam layering works using similar design principles of a high-end motorcycle helmet.

It’s safe in the Sun.We found that our dual-layer construction not only provides fall protection but it also prevents our foam from melting or distorting under high heat. This layer of flexibility allows us to offer the strength and durability of a concrete mound in a much more kid-friendly package.

We stand behind all PlayMounds products.PlayMounds & Innovative Play Solutions have teamed up to provide a 2 year, 100% replacement Express Warranty. After 3-5 years, the replacement value is 50%. After 6-10 years the replacement value is 20%.

We developed our mound from the ground up.Our mounds and structures are built with expanded polystyrene, or EPS foam. We’ve covered them with a ½ layer of protective foam which builds in fall height and heat protection. Your mound has a high compressive rate, so if it gets indented or warped, it will bounce back to form.

PlayMounds are light-weight and easy to installPlayMounds is simple to install and requires no special tools or machinery. Our mounds typically weigh around two hundred pounds and ship in several pieces. Simply fuse the pieces together using the included expandable spray foam, let it cure for 2 minutes, lift and place the mound and you’re done!

Page 3: Welcome to PlayMounds. Reshaping We developed our mound ... · seating area for your playground, backyard, or any area in your landscape. Mounds are shipped ready for you to cover

$1,219.00playmounds benchPlayMounds Bench is a 4’ wide by 3’ high resin bench, ready to be covered in artificial grass for a

comfortable seating area for your playground, backyard, or any area in your landscape. Mounds

are shipped ready for you to cover with the surface of your choice. Ships covered with premium turf.

$2,100.00PlayMounds standard bridgePlayMounds Bridge is a 8’ long by 4’ wide resin bridge for your playground, backyard, doggy day

care or any area in your landscape. Mounds are shipped ready for you to cover with the surface of

your choice. Artificial grass covering is extra.

$2,100.00PlayMounds standard bridge with crawlspacePlayMounds Bridge is a 8’ long by 4’ wide resin bridge with a 24” tunnel, for your playground, back-

yard, doggy day care or any area in your landscape. Mounds are shipped ready for you to cover

with the surface of your choice. Artificial grass covering is extra.

$2,250.00PlayMounds Standard moundPlayMounds Standard is a 10’ diameter by 3’ high resin mound for a gentle rolling effect for your

playground, backyard, doggy day care or any area in your landscape. Mounds are shipped ready

for you to cover with the surface of your choice. Artificial grass covering is extra.

play solutions innovativeplaysolutions.com

$2,450.00PLAYMOUNDS STANDARD WITH TUNNELPlayMounds Standard is a 10’ diameter by 3’ high resin mound with tunnel for a gentle rolling effect

for your playground, backyard, doggy day care or any area in your landscape. Mounds are shipped

ready for you to cover with the surface of your choice. Artificial grass covering is extra.

WHOLESALE PRICE LIST

$1,399.00PlayMounds reclinerPlayMounds Recliner is long resin bench, ready to be covered in artificial grass for a comfortable

seating area for your playground, backyard, or any area in your landscape. Mounds are shipped

ready for you to cover with the surface of your choice. Ships covered with premium turf.

ALL PRODUCTS FOB Rock Face, GA

$1,100.00PlayMounds Mini-hillPlayMounds Mini-HIll is a 4’ wide x 6’ long x 22” high resin hill, for your playground, backyard, doggy

day care or any area in your landscape. Mounds are shipped ready for you to cover with the surface

of your choice. Artificial grass covering is extra.


Recommended